Skip to contentSkip to conversation

PCI : Move pci_fixup_device and is_enabled

PATCH In review Hidetoshi Seto 3 participants 4 messages Nov 22, 2006 – Dec 7, 2006

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 2/5 PCI : Move pci_fixup_device and is_enabled

This patch adds the following changes into generic PCI code especially for PCI legacy I/O port free drivers.

- Moved the following two things from pci_enable_device() into pci_enable_device_bars(). Already some drivers are using pci_enable_device_bars() to enable only the specific regions, but they had no chance to be fixup and to up is_enabled flag.

o Call pci_fixup_device() on the device
o Checking & Setting dev->is_enabled

- Trivial cleanup

---
 drivers/pci/pci.c |   20 ++++++++------------
 1 files changed, 8 insertions(+), 12 deletions(-)
drivers/pci/pci.c +8 -12
Index: linux-2.6.19-rc6/drivers/pci/pci.c
===================================================================
@@ -558,12 +558,18 @@
 {
 	int err;
 
+	if (dev->is_enabled)
+		return 0;
+
 	err = pci_set_power_state(dev, PCI_D0);
 	if (err < 0 && err != -EIO)
 		return err;
 	err = pcibios_enable_device(dev, bars);
 	if (err < 0)
 		return err;
+
+	pci_fixup_device(pci_fixup_enable, dev);
+	dev->is_enabled = 1;
 	return 0;
 }
 
@@ -578,17 +584,7 @@
 int
 pci_enable_device(struct pci_dev *dev)
 {
-	int err;
-
-	if (dev->is_enabled)
-		return 0;
-
-	err = pci_enable_device_bars(dev, (1 << PCI_NUM_RESOURCES) - 1);
-	if (err)
-		return err;
-	pci_fixup_device(pci_fixup_enable, dev);
-	dev->is_enabled = 1;
-	return 0;
+	return pci_enable_device_bars(dev, (1 << PCI_NUM_RESOURCES) - 1);
 }
 
 /**
@@ -737,7 +733,7 @@
 {
 	if (pci_resource_len(pdev, bar) == 0)
 		return 0;
-		
+
 	if (pci_resource_flags(pdev, bar) & IORESOURCE_IO) {
 		if (!request_region(pci_resource_start(pdev, bar),
 			    pci_resource_len(pdev, bar), res_name))
#1 lore raw

drivers/pci/pci.c line 562

Quoted 8 lines · Hidetoshi Seto
drivers/pci/pci.c +2 -0
@@ -558,12 +558,18 @@
 {
 	int err;
 
+	if (dev->is_enabled)
+		return 0;

This is unfortunately going to collide with the previous patch posted by [email protected]:

Subject: [patch 0/2] pci: make pci_{enable,disable}_device() be nested

grant

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

#2 lore raw
Quoted 7 lines · Grant Grundler
Quoted 6 lines · Hidetoshi Seto
drivers/pci/pci.c +0 -0
@@ -558,12 +558,18 @@
 {
 	int err;
 
Quoted 7 lines

drivers/pci/pci.c line 562

Quoted 2 lines
drivers/pci/pci.c +2 -0
+	if (dev->is_enabled)
+		return 0;

This is unfortunately going to collide with the previous patch posted by [email protected]:

Subject: [patch 0/2] pci: make pci_{enable,disable}_device() be nested

Not a problem, that's what I'm here for :)

thanks,

greg k-h

#3 lore raw
In reply to Grant Grundler
Quoted 7 lines · Grant Grundler
Quoted 6 lines · Hidetoshi Seto
drivers/pci/pci.c +0 -0
@@ -558,12 +558,18 @@
 {
 	int err;
 
Quoted 7 lines

drivers/pci/pci.c line 562

Quoted 2 lines
drivers/pci/pci.c +2 -0
+	if (dev->is_enabled)
+		return 0;

This is unfortunately going to collide with the previous patch posted by [email protected]:

Subject: [patch 0/2] pci: make pci_{enable,disable}_device() be nested

Grant, you were right. This has changed the logic around this area, and the pci_enable_device() stuff conflicts with this.

Hidetoshi, I tried to merge things together, but I think I got it wrong, as the logic is different now. Can you please respin this patch and resend all of them?

Sorry for the delay,

thanks,

greg k-h