add STB810 support (Philips PNX8550-based)
PATCH 1/1 add STB810 support (Philips PNX8550-based)
Hello Ralf,
please find the updated patch that adds support for STB810 below.
arch/mips/Kconfig | 5 arch/mips/Makefile | 5 arch/mips/configs/pnx8550-stb810_defconfig | 1229 +++++++++++++++++++++++++ arch/mips/pci/fixup-pnx8550.c | 4 arch/mips/philips/pnx8550/common/prom.c | 20 arch/mips/philips/pnx8550/jbs/irqmap.c | 8 arch/mips/philips/pnx8550/stb810/Makefile | 4 arch/mips/philips/pnx8550/stb810/board_setup.c | 49 arch/mips/philips/pnx8550/stb810/irqmap.c | 23 arch/mips/philips/pnx8550/stb810/prom_init.c | 49 include/asm-mips/bootinfo.h | 1 11 files changed, 1377 insertions(+), 20 deletions(-)
arch/mips/Kconfig +5 -0
@@ -459,6 +459,11 @@ select PNX8550 select SYS_SUPPORTS_LITTLE_ENDIAN +config PNX8550_STB810 + bool "Support for Philips PNX8550 based STB810 board" + select PNX8550 + select SYS_SUPPORTS_LITTLE_ENDIAN + config DDB5477 bool "NEC DDB Vrc-5477" select DDB5XXX_COMMON
arch/mips/Makefile +5 -0
@@ -463,6 +463,11 @@ #cflags-$(CONFIG_PNX8550_JBS) += -Iinclude/asm-mips/mach-pnx8550 load-$(CONFIG_PNX8550_JBS) += 0xffffffff80060000 +# Philips PNX8550 STB810 board +# +libs-$(CONFIG_PNX8550_STB810) += arch/mips/philips/pnx8550/stb810/ +load-$(CONFIG_PNX8550_STB810) += 0xffffffff80060000 + # NEC EMMA2RH boards # core-$(CONFIG_EMMA2RH) += arch/mips/emma2rh/common/
arch/mips/configs/pnx8550-stb810_defconfig new file +1229 -0
1,229 lines not on this page · raw message
arch/mips/philips/pnx8550/common/prom.c +6 -14
@@ -35,23 +35,15 @@return &(arcs_cmdline[0 ]); } -void prom_init_cmdline (void ) +void __init prom_init_cmdline (void ) { -char *cp; -int actr; - - actr =1 ;/* Always ignore argv[0] */ +int i; - cp = &(arcs_cmdline[0 ]); -while (actr < prom_argc) { -strcpy (cp, prom_argv[actr]); - cp +=strlen (prom_argv[actr]); - *cp++ =' ' ; - actr++; + arcs_cmdline[0 ] ='\0' ; +for (i =0 ; i < prom_argc; i++) { +strcat (arcs_cmdline, prom_argv[i]); +strcat (arcs_cmdline," " ); } -if (cp != &(arcs_cmdline[0 ]))/* get rid of trailing space */ - --cp; - *cp ='\0' ; }char *prom_getenv (char *envname)
arch/mips/philips/pnx8550/stb810/Makefile new file +4 -0
@@ -0,0 +1,4 @@ + +# Makefile for the Philips STB810 Board. + +lib-y := prom_init.o board_setup.o irqmap.o
arch/mips/philips/pnx8550/stb810/board_setup.c new file +49 -0
49 lines not on this page · raw message
arch/mips/philips/pnx8550/stb810/irqmap.c new file +23 -0
@@ -0,0 +1,23 @@ +/* +* Philips STB810 board irqmap. +* +* Author: MontaVista Software, Inc. +* [email protected] +* +* Copyright 2005 MontaVista Software Inc. +* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License as published by the +* Free Software Foundation; either version 2 of the License, or (at your +* option) any later version. +*/ + +#include <linux/init.h> +#include <int.h> + +char pnx8550_irq_tab[][5 ]__initdata = { + [8 ] = {-1 ,PNX8550_INT_PCI_INTA ,0xff ,0xff ,0xff }, + [9 ] = {-1 ,PNX8550_INT_PCI_INTA ,0xff ,0xff ,0xff }, + [10 ] = {-1 ,PNX8550_INT_PCI_INTA ,0xff ,0xff ,0xff }, +}; +
arch/mips/philips/pnx8550/stb810/prom_init.c new file +49 -0
49 lines not on this page · raw message
include/asm-mips/bootinfo.h +1 -0
@@ -131,6 +131,7 @@#define MACH_PHILIPS_NINO 0/* Nino */ #define MACH_PHILIPS_VELO 1/* Velo */ #define MACH_PHILIPS_JBS 2/* JBS */ +#define MACH_PHILIPS_STB810 3/* STB810 */ /* * Valid machtype for group SIBYTE
arch/mips/pci/fixup-pnx8550.c +2 -2
@@ -33,7 +33,7 @@ #define DBG(x...)#endif -extern char irq_tab_jbs[][5 ]; +extern char pnx8550_irq_tab[][5 ];void __init pcibios_fixup_resources (struct pci_dev *dev) {
@@ -47,7 +47,7 @@int __init pcibios_map_irq (struct pci_dev *dev,u8 slot,u8 pin) { -return irq_tab_jbs[slot][pin]; +return pnx8550_irq_tab[slot][pin]; }/* Do platform specific device initialization at pci_enable_device() time */
arch/mips/philips/pnx8550/jbs/irqmap.c +4 -4
@@ -28,9 +28,9 @@#include <linux/init.h> #include <int.h> -char irq_tab_jbs[][5 ]__initdata = { - [8 ] = {-1 ,PNX8550_INT_PCI_INTA ,0xff ,0xff ,0xff }, - [9 ] = {-1 ,PNX8550_INT_PCI_INTA ,0xff ,0xff ,0xff }, - [17 ] = {-1 ,PNX8550_INT_PCI_INTA ,0xff ,0xff ,0xff }, +char pnx8550_irq_tab[][5 ]__initdata = { + [8 ] = {-1 ,PNX8550_INT_PCI_INTA ,0xff ,0xff ,0xff }, + [9 ] = {-1 ,PNX8550_INT_PCI_INTA ,0xff ,0xff ,0xff }, + [17 ] = {-1 ,PNX8550_INT_PCI_INTA ,0xff ,0xff ,0xff }, };
Quoted 1 line · Vitaly Wool
please find the updated patch that adds support for STB810 below.
Ok, I applied the unARMed version of the patch :-)
Thanks Vitaly,
Ralf
On Fri, Dec 08, 2006 at 01:05:43PM +0000, Ralf Baechle wrote:
Hmmm...
CC arch/mips/philips/pnx8550/common/setup.oarch/mips/philips/pnx8550/common/setup.c:27:34: error: linux/serial_pnx8xxx.h: No such file or directory arch/mips/philips/pnx8550/common/setup.c: In function 'plat_mem_setup':arch/mips/philips/pnx8550/common/setup.c:147: error: 'PNX8XXX_UART_LCR_8BIT' undeclared (first use in this function) arch/mips/philips/pnx8550/common/setup.c:147: error: (Each undeclared identifier is reported only once arch/mips/philips/pnx8550/common/setup.c:147: error: for each function it appears in.)
make[1]: *** [arch/mips/philips/pnx8550/common/setup.o] Error 1
make: *** [arch/mips/philips/pnx8550/common] Error 2
Ralf
Hello.
Quoted 7 lines · Ralf Baechle
On Fri, Dec 08, 2006 at 01:05:43PM +0000, Ralf Baechle wrote:
Hmmm...
CC
arch/mips/philips/pnx8550/common/setup.oarch/mips/philips/pnx8550/common/setup.c:27:34: error:linux/serial_pnx8xxx.h: No such file or directory
Quoted 6 lines
arch/mips/philips/pnx8550/common/setup.c: In function 'plat_mem_setup':arch/mips/philips/pnx8550/common/setup.c:147: error: 'PNX8XXX_UART_LCR_8BIT' undeclared (first use in this function)arch/mips/philips/pnx8550/common/setup.c:147: error: (Each undeclared identifier is reported only oncearch/mips/philips/pnx8550/common/setup.c:147: error: for each function it appears in.)
make[1]: *** [arch/mips/philips/pnx8550/common/setup.o] Error 1
make: *** [arch/mips/philips/pnx8550/common] Error 2
PNX8xxx UART driver still not accepted it seems, thanks to RMK's step out
from the serial core maintenance...
WBR, Sergei
Quoted 4 lines · Ralf Baechle
On Fri, Dec 08, 2006 at 01:05:43PM +0000, Ralf Baechle wrote:
Hmmm...
Quoted 12 lines
CC
arch/mips/philips/pnx8550/common/setup.oarch/mips/philips/pnx8550/common/setup.c:27:34: error:linux/serial_pnx8xxx.h: No such file or directoryarch/mips/philips/pnx8550/common/setup.c: In function 'plat_mem_setup':arch/mips/philips/pnx8550/common/setup.c:147: error: 'PNX8XXX_UART_LCR_8BIT' undeclared (first use in this function)arch/mips/philips/pnx8550/common/setup.c:147: error: (Each undeclared identifier is reported only oncearch/mips/philips/pnx8550/common/setup.c:147: error: for each function it appears in.)
make[1]: *** [arch/mips/philips/pnx8550/common/setup.o] Error 1
make: *** [arch/mips/philips/pnx8550/common] Error 2
That's due to my serial rework for 8550 still being ignored, even though it has been accepted basically by rmk just before he quitted mainstaining serial stuff .
The latest repost was yesterday: http://lkml.org/lkml/2006/12/7/147.
I don't know what else to do to make it seen by anyone :(
Vitaly
Hello.
Quoted 1 line · Vitaly Wool
please find the updated patch that adds support for STB810 below.
[...]
arch/mips/configs/pnx8550-stb810_defconfig
Quoted 8 lines
Signed-off-by Vitaly Wool <[email protected]>Index: linux-mips.git/arch/mips/configs/pnx8550-stb810_defconfig
===================================================================arch/mips/configs/pnx8550-stb810_defconfig new file +1
-0+CONFIG_BLK_DEV_HPT366=y
Oh? Definitely not a good driver support choice for embedded targets...
Does STB810 have is on board?
Quoted 4 lines
arch/mips/configs/pnx8550-stb810_defconfig new file +4
-0+# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support
arch/mips/configs/pnx8550-stb810_defconfig line 472
Quoted 10 lines
arch/mips/configs/pnx8550-stb810_defconfig new file +10
-0+# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y
Do we really need SCSI *disk* support?
Quoted 10 lines
arch/mips/configs/pnx8550-stb810_defconfig new file +10
-0+# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +CONFIG_SCSI_CONSTANTS=y +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transports +#
arch/mips/configs/pnx8550-stb810_defconfig line 498
Quoted 10 lines
arch/mips/configs/pnx8550-stb810_defconfig new file +10
-0+# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +CONFIG_SCSI_ISCSI_ATTRS=m +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +CONFIG_ISCSI_TCP=m
I doubt this kernel needs iSCSI crap even as modules...
arch/mips/configs/pnx8550-stb810_defconfig line 741
Quoted 5 lines
arch/mips/configs/pnx8550-stb810_defconfig new file +5
-0+# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y
Oh?
arch/mips/configs/pnx8550-stb810_defconfig line 774
Quoted 4 lines
arch/mips/configs/pnx8550-stb810_defconfig new file +4
-0+# +# Hardware Monitoring support +# +CONFIG_HWMON=y
Oh really?
arch/mips/configs/pnx8550-stb810_defconfig line 861
Quoted 12 lines
arch/mips/configs/pnx8550-stb810_defconfig new file +12
-0+# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +CONFIG_USB_STORAGE_DATAFAB=y +CONFIG_USB_STORAGE_FREECOM=y +CONFIG_USB_STORAGE_ISD200=y +CONFIG_USB_STORAGE_DPCM=y +CONFIG_USB_STORAGE_USBAT=y +CONFIG_USB_STORAGE_SDDR09=y +CONFIG_USB_STORAGE_SDDR55=y +CONFIG_USB_STORAGE_JUMPSHOT=y
Hm, do we really need to support all these?
Quoted 88 lines
arch/mips/configs/pnx8550-stb810_defconfig new file +88
-0+CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_DNOTIFY is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +# CONFIG_PROC_KCORE is not set +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +CONFIG_NFSD=m +# CONFIG_NFSD_V3 is not set +# CONFIG_NFSD_TCP is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set
arch/mips/configs/pnx8550-stb810_defconfig line 1089
Quoted 10 lines
arch/mips/configs/pnx8550-stb810_defconfig new file +10
-0+# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y
I doubt this kernel needs iSCSI crap even as modules but well...
WBR, Sergei
Quoted 7 lines · Hello, I wrote:
arch/mips/configs/pnx8550-stb810_defconfig line 1089
Quoted 5 lines
arch/mips/configs/pnx8550-stb810_defconfig new file +5
-0+# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=yI doubt this kernel needs iSCSI crap even as modules but well...
Oh, sorry, cut-n-paste issue. I meant to also complain about [V]FAT
support in-kernel...
WBR, Sergei