Skip to contentSkip to conversation

fix PNX8550 serial breakage

PATCH RESEND In review Vitaly Wool 3 participants 3 messages Dec 7, 2006 – Dec 9, 2006 TTY layer and serial drivers

lore
Share & tools
lore
#0 lore raw

PATCH RESEND 1/1 fix PNX8550 serial breakage

Hello folks,

inlined is the patch (being resent) that fixes the serial header breakage for the PNX8550 MIPS platform.

 include/linux/serial_core.h    |    2 -
 include/linux/serial_ip3106.h  |   81 -----------------------------------------
 include/linux/serial_pnx8xxx.h |   81 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 82 insertions(+), 82 deletions(-)
include/linux/serial_ip3106.h deleted +0 -81
Index: linux-2.6/include/linux/serial_ip3106.h
===================================================================
@@ -1,81 +0,0 @@
-/*
- * Embedded Alley Solutions, [email protected].
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef _LINUX_SERIAL_IP3106_H
-#define _LINUX_SERIAL_IP3106_H
-
-#include <linux/serial_core.h>
-#include <linux/device.h>
-
-#define IP3106_NR_PORTS		2
-
-struct ip3106_port {
-	struct uart_port	port;
-	struct timer_list	timer;
-	unsigned int		old_status;
-};
-
-/* register offsets */
-#define IP3106_LCR		0
-#define IP3106_MCR		0x004
-#define IP3106_BAUD		0x008
-#define IP3106_CFG		0x00c
-#define IP3106_FIFO		0x028
-#define IP3106_ISTAT		0xfe0
-#define IP3106_IEN		0xfe4
-#define IP3106_ICLR		0xfe8
-#define IP3106_ISET		0xfec
-#define IP3106_PD		0xff4
-#define IP3106_MID		0xffc
-
-#define IP3106_UART_LCR_TXBREAK		(1<<30)
-#define IP3106_UART_LCR_PAREVN		0x10000000
-#define IP3106_UART_LCR_PAREN		0x08000000
-#define IP3106_UART_LCR_2STOPB		0x04000000
-#define IP3106_UART_LCR_8BIT		0x01000000
-#define IP3106_UART_LCR_TX_RST		0x00040000
-#define IP3106_UART_LCR_RX_RST		0x00020000
-#define IP3106_UART_LCR_RX_NEXT		0x00010000
-
-#define IP3106_UART_MCR_SCR		0xFF000000
-#define IP3106_UART_MCR_DCD		0x00800000
-#define IP3106_UART_MCR_CTS		0x00100000
-#define IP3106_UART_MCR_LOOP		0x00000010
-#define IP3106_UART_MCR_RTS		0x00000002
-#define IP3106_UART_MCR_DTR		0x00000001
-
-#define IP3106_UART_INT_TX		0x00000080
-#define IP3106_UART_INT_EMPTY		0x00000040
-#define IP3106_UART_INT_RCVTO		0x00000020
-#define IP3106_UART_INT_RX		0x00000010
-#define IP3106_UART_INT_RXOVRN		0x00000008
-#define IP3106_UART_INT_FRERR		0x00000004
-#define IP3106_UART_INT_BREAK		0x00000002
-#define IP3106_UART_INT_PARITY		0x00000001
-#define IP3106_UART_INT_ALLRX		0x0000003F
-#define IP3106_UART_INT_ALLTX		0x000000C0
-
-#define IP3106_UART_FIFO_TXFIFO		0x001F0000
-#define IP3106_UART_FIFO_TXFIFO_STA	(0x1f<<16)
-#define IP3106_UART_FIFO_RXBRK		0x00008000
-#define IP3106_UART_FIFO_RXFE		0x00004000
-#define IP3106_UART_FIFO_RXPAR		0x00002000
-#define IP3106_UART_FIFO_RXFIFO		0x00001F00
-#define IP3106_UART_FIFO_RBRTHR		0x000000FF
-
-#endif
include/linux/serial_pnx8xxx.h new file +81 -0

81 lines not on this page · raw message

include/linux/serial_core.h +1 -1
Index: linux-2.6/include/linux/serial_core.h
===================================================================
@@ -122,7 +122,7 @@
 /*Digi jsm */
 #define PORT_JSM        69
 
-#define PORT_IP3106	70
+#define PORT_PNX8XXX	70
 
 /* Hilscher netx */
 #define PORT_NETX	71
#1 lore raw
Quoted 1 line · Vitaly Wool

inlined is the patch (being resent) that fixes the serial header breakage for the PNX8550 MIPS platform.

Patch seems broken:

patching file include/linux/serial_ip3106.h
The next patch would create the file include/linux/serial_pnx8xxx.h, which already exists! Assume -R? [n] y
patching file include/linux/serial_pnx8xxx.h
patching file include/linux/serial_core.h

Ralf

#2 lore raw
In reply to Vitaly Wool
Quoted 1 line · On Thu, 7 Dec 2006 18:24:39 +0300 Vitaly Wool <[email protected]> wrote:

inlined is the patch (being resent) that fixes the serial header breakage for the PNX8550 MIPS platform.

When sending a fix please include a full description of the problem which is being fixed, and a description of how the patch fixes it, if that is not utterly obvious.

Thanks.