Skip to contentSkip to conversation

cxgb3 - offload header files

PATCH New Divy Le Ray 1 participant 1 message Dec 14, 2006

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 7/10 cxgb3 - offload header files

From: Divy Le Ray <[email protected]>

This patch implements the offload operations header files for the Chelsio T3 network adapter's driver.

---

 drivers/net/cxgb3/cxgb3_ctl_defs.h |  142 ++++
 drivers/net/cxgb3/cxgb3_defs.h     |   99 ++
 drivers/net/cxgb3/cxgb3_offload.h  |  193 +++++
 drivers/net/cxgb3/l2t.h            |  143 ++++
 drivers/net/cxgb3/t3_cpl.h         | 1426 ++++++++++++++++++++++++++++++++++++
 drivers/net/cxgb3/t3cdev.h         |   72 ++
 6 files changed, 2075 insertions(+), 0 deletions(-)
drivers/net/cxgb3/cxgb3_ctl_defs.h new file +142 -0
new file mode 100755
index 0000000..0fdc365
@@ -0,0 +1,142 @@
+/*
+ * Copyright (C) 2003-2006 Chelsio Communications.  All rights reserved.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the LICENSE file included in this
+ * release for licensing terms and conditions.
+ */
+
+#ifndef _CXGB3_OFFLOAD_CTL_DEFS_H
+#define _CXGB3_OFFLOAD_CTL_DEFS_H
+
+enum {
+	GET_MAX_OUTSTANDING_WR,
+	GET_TX_MAX_CHUNK,
+	GET_TID_RANGE,
+	GET_STID_RANGE,
+	GET_RTBL_RANGE,
+	GET_L2T_CAPACITY,
+	GET_MTUS,
+	GET_WR_LEN,
+	GET_IFF_FROM_MAC,
+	GET_DDP_PARAMS,
+	GET_PORTS,
+
+	ULP_ISCSI_GET_PARAMS,
+	ULP_ISCSI_SET_PARAMS,
+
+	RDMA_GET_PARAMS,
+	RDMA_CQ_OP,
+	RDMA_CQ_SETUP,
+	RDMA_CQ_DISABLE,
+	RDMA_CTRL_QP_SETUP,
+	RDMA_GET_MEM,
+};
+
+/*
+ * Structure used to describe a TID range.  Valid TIDs are [base, base+num).
+ */
+struct tid_range {
+	unsigned int base;	/* first TID */
+	unsigned int num;	/* number of TIDs in range */
+};
+
+/*
+ * Structure used to request the size and contents of the MTU table.
+ */
+struct mtutab {
+	unsigned int size;	/* # of entries in the MTU table */
+	const unsigned short *mtus;	/* the MTU table values */
+};
+
+struct net_device;
+
+/*
+ * Structure used to request the adapter net_device owning a given MAC address.
+ */
+struct iff_mac {
+	struct net_device *dev;	/* the net_device */
+	const unsigned char *mac_addr;	/* MAC address to lookup */
+	u16 vlan_tag;
+};
+
+struct pci_dev;
+
+/*
+ * Structure used to request the TCP DDP parameters.
+ */
+struct ddp_params {
+	unsigned int llimit;	/* TDDP region start address */
+	unsigned int ulimit;	/* TDDP region end address */
+	unsigned int tag_mask;	/* TDDP tag mask */
+	struct pci_dev *pdev;
+};
+
+struct adap_ports {
+	unsigned int nports;	/* number of ports on this adapter */
+	struct net_device *lldevs[2];
+};
+
+/*
+ * Structure used to return information to the iscsi layer.
+ */
+struct ulp_iscsi_info {
+	unsigned int offset;
+	unsigned int llimit;
+	unsigned int ulimit;
+	unsigned int tagmask;
+	unsigned int pgsz3;
+	unsigned int pgsz2;
+	unsigned int pgsz1;
+	unsigned int pgsz0;
+	unsigned int max_rxsz;
+	unsigned int max_txsz;
+	struct pci_dev *pdev;
+};
+
+/*
+ * Structure used to return information to the RDMA layer.
+ */
+struct rdma_info {
+	unsigned int tpt_base;	/* TPT base address */
+	unsigned int tpt_top;	/* TPT last entry address */
+	unsigned int pbl_base;	/* PBL base address */
+	unsigned int pbl_top;	/* PBL last entry address */
+	unsigned int rqt_base;	/* RQT base address */
+	unsigned int rqt_top;	/* RQT last entry address */
+	unsigned int udbell_len;	/* user doorbell region length */
+	unsigned long udbell_physbase;	/* user doorbell physical start addr */
+	void __iomem *kdb_addr;	/* kernel doorbell register address */
+	struct pci_dev *pdev;	/* associated PCI device */
+};
+
+/*
+ * Structure used to request an operation on an RDMA completion queue.
+ */
+struct rdma_cq_op {
+	unsigned int id;
+	unsigned int op;
+	unsigned int credits;
+};
+
+/*
+ * Structure used to setup RDMA completion queues.
+ */
+struct rdma_cq_setup {
+	unsigned int id;
+	unsigned long long base_addr;
+	unsigned int size;
+	unsigned int credits;
+	unsigned int credit_thres;
+	unsigned int ovfl_mode;
+};
+
+/*
+ * Structure used to setup the RDMA control egress context.
+ */
+struct rdma_ctrlqp_setup {
+	unsigned long long base_addr;
+	unsigned int size;
+};
+#endif				/* _CXGB3_OFFLOAD_CTL_DEFS_H */
drivers/net/cxgb3/cxgb3_defs.h new file +99 -0

99 lines not on this page · raw message

drivers/net/cxgb3/cxgb3_offload.h new file +193 -0

193 lines not on this page · raw message

drivers/net/cxgb3/l2t.h new file +143 -0

143 lines not on this page · raw message

drivers/net/cxgb3/t3_cpl.h new file +1426 -0

1,426 lines not on this page · raw message

drivers/net/cxgb3/t3cdev.h new file +72 -0

72 lines not on this page · raw message