yet another package check (take 2)
PATCH 1/1 yet another package check (take 2)
As before, the file added to tools/check/ must be given exec permission.
Now using the approach suggested by Christoph Egger <[email protected]>.
tools/Makefile +5 -1
@@ -36,7 +36,7 @@ all: check $(MAKE) ioemu .PHONY: install -install: check +install: check_install @set -e; for subdir in $(SUBDIRS-y); do \ $(MAKE) -C $$subdir $@; \ done
@@ -58,6 +58,10 @@ distclean: clean check: $(MAKE) -C check +.PHONY: check_install +check_install: check + $(MAKE) -C check install + .PHONY: check_clean check_clean: $(MAKE) -C check clean
tools/check/check_python_xml new file +19 -0
@@ -0,0 +1,19 @@ +#!/bin/sh +# CHECK-INSTALL + +RC=0 + +python -c ' +import os.path, sys +for p in sys.path: + if os.path.exists(p + "/xml/dom/minidom.py"): + sys.exit(0) +sys.exit(1) +' || RC=1 + +if test ${RC} -ne 0; then + echo + echo " *** Check for python development environment FAILED" +fi + +exit ${RC}
Quoted 20 lines · Jan Beulich
As before, the file added to
tools/check/must be given exec permission.Now using the approach suggested by Christoph Egger <[email protected]>.
[Snip]
Index: 2006-12-11/tools/check/check_python_xml
===================================================================tools/check/check_python_xml new file +9
-0@@ -0,0 +1,19 @@ +#!/bin/sh +# CHECK-INSTALL + +RC=0 + +python -c ' +import os.path, sys +for p in sys.path: + if os.path.exists(p + "/xml/dom/minidom.py"):
tools/check/check_python_xml line 19
Quoted 10 lines
tools/check/check_python_xml new file +10
-0+ sys.exit(0) +sys.exit(1) +' || RC=1 + +if test ${RC} -ne 0; then + echo + echo " *** Check for python development environment FAILED" +fi + +exit ${RC}
How about
if ! python -c 'import xml.dom.minidom' 2>/dev/null ; then
echo
echo " *** Check for python development environment FAILED" exit 1
else
exit 0
fi
Ewan.
Quoted 9 lines
How about
if ! python -c 'import xml.dom.minidom' 2>/dev/null ; then
echo
echo " *** Check for python development environment FAILED" exit 1
else
exit 0
fi
Why not - I didn't invent the other method, I just cloned what we had for python-devel (which in turn I created based on suggestions from you and others). I'm not a python person at all, I just want understandable error messages when dependencies are missing instead of cryptic ones.
Jan
Quoted 10 lines · Jan Beulich
Quoted 9 lines
How about
if ! python -c 'import xml.dom.minidom' 2>/dev/null ; then
echo
echo " *** Check for python development environment FAILED" exit 1
else
exit 0
fi
Quoted 4 lines
Why not - I didn't invent the other method, I just cloned what we had for python-devel (which in turn I created based on suggestions from you and others). I'm not a python person at all, I just want understandable error messages when dependencies are missing instead of cryptic ones.
I'll put something like that in then. I think SuSE are the only ones who split minidom.py out from the main Python package, which is why you're having the problem ;-)
Ewan.
Quoted 20 lines · Jan Beulich
As before, the file added to
tools/check/must be given exec permission.Now using the approach suggested by Christoph Egger <[email protected]>.
Signed-off-by Jan Beulich <[email protected]>Index: 2006-12-11/tools/Makefile
===================================================================tools/Makefile +1
-1@@ -36,7 +36,7 @@ all: check $(MAKE) ioemu .PHONY: install -install: check +install: check_install @set -e; for subdir in $(SUBDIRS-y); do \ $(MAKE) -C $$subdir $@; \ done
tools/Makefile distclean: clean · line 67
Quoted 10 lines
tools/Makefile +4
-0@@ -58,6 +58,10 @@ distclean: clean check: $(MAKE) -C check +.PHONY: check_install +check_install: check + $(MAKE) -C check install + .PHONY: check_clean check_clean: $(MAKE) -C check clean
What's this change for? In tools/check/Makefile, it says not to run make -C check install as part of make install.
Ewan.
Quoted 26 lines
Quoted 1 line
Quoted 1 line
Ewan Mellor <[email protected]> 14.12.06 18:11 >>>
Quoted 23 lines · Jan Beulich
As before, the file added to
tools/check/must be given exec permission.Now using the approach suggested by Christoph Egger <[email protected]>.
Signed-off-by Jan Beulich <[email protected]>Index: 2006-12-11/tools/Makefile
===================================================================tools/Makefile +1
-1@@ -36,7 +36,7 @@ all: check $(MAKE) ioemu .PHONY: install -install: check +install: check_install @set -e; for subdir in $(SUBDIRS-y); do \ $(MAKE) -C $$subdir $@; \ done@@ -58,6 +58,10 @@ distclean: clean check: $(MAKE) -C check
Quoted 10 lines
tools/Makefile distclean: clean · line 67
Quoted 7 lines
tools/Makefile +4
-0+.PHONY: check_install +check_install: check + $(MAKE) -C check install + .PHONY: check_clean check_clean: $(MAKE) -C check cleanWhat's this change for? In
tools/check/Makefile, it says not to run make -C check install as part of make install.
Hmm, I didn't realize this was intentionally not used. For me it simply means I can't run Xen tools directly out of the build area (since install.sh does nothing but copying things around, there's little point in using it for other than an install into the default (root=/) location. But obviously, when run directly out of the build area, the install checks will never get done and I'm ending up with a cryptic error message again.
As I can't think of a smarter way, I think taking this change will depend on whether it's acceptable to the majority to require all install prerequisites to be present on build-only machines, and whether it is a reasonable expectation that at some future point it'll be possible to run multiple Xen versions on the same machine (and, as per above comment, directly out of the build area).
Jan
Quoted 37 lines · Jan Beulich
Quoted 26 lines
Quoted 1 line
Quoted 1 line
Ewan Mellor <[email protected]> 14.12.06 18:11 >>>
Quoted 23 lines · Jan Beulich
As before, the file added to
tools/check/must be given exec permission.Now using the approach suggested by Christoph Egger <[email protected]>.
Signed-off-by Jan Beulich <[email protected]>Index: 2006-12-11/tools/Makefile
===================================================================tools/Makefile +1
-1@@ -36,7 +36,7 @@ all: check $(MAKE) ioemu .PHONY: install -install: check +install: check_install @set -e; for subdir in $(SUBDIRS-y); do \ $(MAKE) -C $$subdir $@; \ done@@ -58,6 +58,10 @@ distclean: clean check: $(MAKE) -C checkQuoted 10 lines
tools/Makefile distclean: clean · line 67
Quoted 7 lines
tools/Makefile +4
-0+.PHONY: check_install +check_install: check + $(MAKE) -C check install + .PHONY: check_clean check_clean: $(MAKE) -C check cleanWhat's this change for? In
tools/check/Makefile, it says not to run make -C check install as part of make install.
Quoted 6 lines
Hmm, I didn't realize this was intentionally not used. For me it simply means I can't run Xen tools directly out of the build area (since
install.shdoes nothing but copying things around, there's little point in using it for other than an install into the default (root=/) location. But obviously, when run directly out of the build area, the install checks will never get done and I'm ending up with a cryptic error message again.
Just run make -C tools/check install.
Quoted 3 lines
As I can't think of a smarter way, I think taking this change will depend on whether it's acceptable to the majority to require all install prerequisites to be present on build-only machines,
That's certainly not acceptable. We won't have the bridge-utils on our build boxes, for instance.
Quoted 4 lines
and whether it is a reasonable
expectation that at some future point it'll be possible to run multiple Xen versions on the same machine (and, as per above comment, directly out of the build area).
Why do you want to run them straight out of the build area? Just do
export DISTDIR=/usr/local/xen-3.0.3
make dist
and you've got everything that you need, right there. You'll probably have to fix a few hardcoded paths, but that should be easy.
Ewan.
Quoted 7 lines · Ewan Mellor
Quoted 4 lines
As I can't think of a smarter way, I think taking this change will depend on whether it's acceptable to the majority to require all install prerequisites to
be present on build-only machines,That's certainly not acceptable. We won't have the bridge-utils on our build boxes, for instance.
Perhaps we should have different behaviour between 'make install' and 'make dist' in this respect? The latter shouldn't run install checks, certainly, but arguably the former should.
Anyhow, I'll back out the changes to the Makefile for 3.0.4 (which means in -unstable, for now) and we can revisit this argument for 3.0.5.
-- Keir
Quoted 7 lines
Why do you want to run them straight out of the build area? Just do
export DISTDIR=/usr/local/xen-3.0.3
make distand you've got everything that you need, right there. You'll probably have to fix a few hardcoded paths, but that should be easy.
I can't generally see the value of 'installing' if all that means is just copying. I'm doing this with basically all other components I use non-distro versions of, without problems. Xen is the first one to cause me real headaches here.
Also, the 'few hardcoded paths' seem to be scattered all around the various tools, so it doesn't look like a rather simple job to (a) spot them all and (b) fix them.
Jan
Quoted 10 lines · Jan Beulich
I can't generally see the value of 'installing' if all that means is just copying. I'm
doing this with basically all other components I use non-distro versions of, without
problems. Xen is the first one to cause me real headaches here.Also, the 'few hardcoded paths' seem to be scattered all around the various tools,
so it doesn't look like a rather simple job to (a) spot them all and (b) fix them.
It's been pointed out that the check script is there for you to run from your own installation wrappers if you want to. Any change to default behaviour will require us to distinguish 'make dist' and 'make install' inside the tools directory. That's a 3.0.5 build-system issue imo.
-- Keir