Skip to contentSkip to conversation

Add support esd CPCI-ASIO4 4-port serial board

PATCH New Matthias Fuchs 1 participant 1 message Dec 15, 2006

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Add support esd CPCI-ASIO4 4-port serial board

Hi,

this patch adds support for esd's CPCI-ASIO4 4-port serial interface board. The new PCI ids are added to include/linux/pci_ids.h.

Matthias

---
commit 5513f516c850f1e3422ca4316a255b09edbe214e
tree 7141cb8087cdf9da6601a95d4921db70262e7c3a
parent e1036502e5263851259d147771226161e5ccc85a
author Matthias Fuchs <[email protected]> Fri, 15 Dec 2006 09:27:36 +0100
committer Matthias Fuchs <[email protected]> Fri, 15 Dec 2006 09:27:36 +0100

 drivers/serial/8250_pci.c |   11 +++++++++++
 include/linux/pci_ids.h   |    3 +++
 2 files changed, 14 insertions(+), 0 deletions(-)
drivers/serial/8250_pci.c +11 -0
index 4d0ff8f..3de8f14 100644
@@ -936,6 +936,7 @@ enum pci_board_num_t {
 
        pbn_b2_1_115200,
        pbn_b2_2_115200,
+       pbn_b2_4_115200,
        pbn_b2_8_115200,
 
        pbn_b2_1_460800,
@@ -1249,6 +1250,12 @@ static struct pciserial_board pci_boards
                .base_baud      = 115200,
                .uart_offset    = 8,
        },
+       [pbn_b2_4_115200] = {
+               .flags          = FL_BASE2,
+               .num_ports      = 4,
+               .base_baud      = 115200,
+               .uart_offset    = 8,
+       },
        [pbn_b2_8_115200] = {
                .flags          = FL_BASE2,
                .num_ports      = 8,
@@ -1990,6 +1997,10 @@ static struct pci_device_id serial_pci_t
        {       PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_DUALMODEM,
                PCI_ANY_ID, PCI_ANY_ID, 0, 0,
                pbn_panacom2 },
+       {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030,
+               PCI_VENDOR_ID_ESDGMBH,
+               PCI_DEVICE_ID_ESDGMBH_CPCIASIO4, 0, 0,
+               pbn_b2_4_115200 },
        {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
                PCI_SUBVENDOR_ID_CHASE_PCIFAST,
                PCI_SUBDEVICE_ID_CHASE_PCIFAST4, 0, 0,
include/linux/pci_ids.h +3 -0
index 51180db..4d170e0 100644
@@ -949,6 +949,7 @@
 #define PCI_DEVICE_ID_PLX_R753         0x1152
 #define PCI_DEVICE_ID_PLX_OLITEC       0x1187
 #define PCI_DEVICE_ID_PLX_PCI200SYN    0x3196
+#define PCI_DEVICE_ID_PLX_9030         0x9030
 #define PCI_DEVICE_ID_PLX_9050         0x9050
 #define PCI_DEVICE_ID_PLX_9080         0x9080
 #define PCI_DEVICE_ID_PLX_GTEK_SERIAL2 0xa001
@@ -1681,6 +1682,8 @@
 #define PCI_VENDOR_ID_ELECTRONICDESIGNGMBH 0x12f8
 #define PCI_DEVICE_ID_LML_33R10                0x8a02
 
+#define PCI_VENDOR_ID_ESDGMBH           0x12fe
+#define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4        0x0111
 
 #define PCI_VENDOR_ID_SIIG             0x131f
 #define PCI_SUBVENDOR_ID_SIIG          0x131f
Signature · 5 lines
-----------------------------------------------------------------------
Dipl.-Ing. Matthias Fuchs             esd electronic system design gmbh
http://www.esd-electronics.com                    Vahrenwalder Str. 207
phone: +49-511-37298-0, fax: -68                30165 Hannover, Germany
-----------------------------------------------------------------------