Skip to contentSkip to conversation

2.6.18.5 usb/sysfs bug.

DISCUSSION Chuck Ebbert 2 participants 2 messages Dec 16, 2006

lore
Share & tools
lore
#0 lore raw

In-Reply-To: <[email protected]>

Quoted 8 lines · Dave Jones
Quoted 2 lines

Can you enable CONFIG_USB_DEBUG and send the log info that happens right before this oops?

Gah, and here it is, actually attached this time.

BUG: unable to handle kernel NULL pointer dereference at virtual address 0000000b

EIP is at sysfs_hash_and_remove+0x18/0xfd

That's strange. Remove_files called sysfs_hash_and_remove() with dir==0xfffffff3 (-13 decimal.)

static void remove_files(struct dentry * dir,
const struct attribute_group * grp)

{
        struct attribute *const* attr;

        for (attr = grp->attrs; *attr; attr++)
                sysfs_hash_and_remove(dir,(*attr)->name); <========
}
Quoted 14 lines

Process pcscd (pid: 2678, ti=f6d28000 task=f7dbe1f0 task.ti=f6d28000)

Stack: c0634109 fffffff3 f7063414 c069cf0c fffffff3 fffffff3 f7063414 c04a7f69 
       c069cf00 f70632b0 c04a7fb8 f7063208 f70473a0 f7063208 c055572f f70632b0 
       c05513ff f7063208 f7000640 00000001 f703f788 c055142e f6d28ed4 c058800c 
Call Trace:
 [<c04a7f69>] remove_files+0x15/0x1e
 [<c04a7fb8>] sysfs_remove_group+0x46/0x5c
 [<c055572f>] device_pm_remove+0x2b/0x62
 [<c05513ff>] device_del+0x11a/0x141
 [<c055142e>] device_unregister+0x8/0x10
 [<c058800c>] usb_remove_ep_files+0x5b/0x7b
 [<c0587b82>] usb_remove_sysfs_intf_files+0x1d/0x54
 [<c0585b5c>] usb_set_interface+0x135/0x1bf
 [<c0586047>] usb_unbind_interface+0x4a/0x6a
Quoted 8 lines
 [<c0552a38>] __device_release_driver+0x60/0x78
 [<c0552c85>] device_release_driver+0x2b/0x3a
 [<c057e4f5>] usb_driver_release_interface+0x3b/0x63
 [<c058833d>] releaseintf+0x4b/0x5b
 [<c058ab8d>] usbdev_release+0x67/0x9e
 [<c0470402>] __fput+0xba/0x188
 [<c046dc61>] filp_close+0x52/0x59
 [<c0404013>] syscall_call+0x7/0xb

What is pcscd?

Earlier in bootup you got this:

hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0004
uhci_hcd 0000:00:1d.0: port 2 portsc 008a,00
hub 1-0:1.0: port 2, status 0100, change 0003, 12 Mb/s
usb 1-2: USB disconnect, address 2
usb 1-2: usb_disable_device nuking all URBs
uhci_hcd 0000:00:1d.0: shutdown urb f7ed7540 pipe 40408280 ep1in-intr usb 1-2: unregistering interface 1-2:1.0
usbdev1.2_ep81: ep_device_release called for usbdev1.2_ep81
usb 1-2:1.0: uevent
usb 1-2: unregistering device
usbdev1.2_ep00: ep_device_release called for usbdev1.2_ep00

usb_remove_ep_files() is in the call trace, so this may be related?

Signature · 1 line
MBTI: IXTP
#1 lore raw
Quoted 7 lines · Chuck Ebbert

In-Reply-To: <[email protected]>

Quoted 3 lines · Dave Jones
Quoted 2 lines

Can you enable CONFIG_USB_DEBUG and send the log info that happens right before this oops?

Quoted 8 lines
Quoted 5 lines

Gah, and here it is, actually attached this time.

BUG: unable to handle kernel NULL pointer dereference at virtual address 0000000b

EIP is at sysfs_hash_and_remove+0x18/0xfd

That's strange. Remove_files called sysfs_hash_and_remove() with dir==0xfffffff3 (-13 decimal.)

Hmm, That's -EACCESS. Something not checking a return code at a lower level maybe ?

Quoted 1 line

What is pcscd?

Some smart card daemon iirc.

Quoted 14 lines

Earlier in bootup you got this:

hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0004
uhci_hcd 0000:00:1d.0: port 2 portsc 008a,00
hub 1-0:1.0: port 2, status 0100, change 0003, 12 Mb/s
usb 1-2: USB disconnect, address 2
usb 1-2: usb_disable_device nuking all URBs
uhci_hcd 0000:00:1d.0: shutdown urb f7ed7540 pipe 40408280 ep1in-intr usb 1-2: unregistering interface 1-2:1.0
usbdev1.2_ep81: ep_device_release called for usbdev1.2_ep81
usb 1-2:1.0: uevent
usb 1-2: unregistering device
usbdev1.2_ep00: ep_device_release called for usbdev1.2_ep00

Quoted 1 line

usb_remove_ep_files() is in the call trace, so this may be related?

It's odd that something disconnects during boot, as nothing gets plugged.

Dave

Signature · 1 line
http://www.codemonkey.org.uk