pata_marvell and Marvell 88SE6121
I am trying to make work the driver pata_marvell of linux-2.6.20-rc1 with Marvell 88SE6121.
I added the PCI ID: 0x6121
{ PCI_DEVICE(0x11AB, 0x6101), },
{ PCI_DEVICE(0x11AB, 0x6145), },
{ PCI_DEVICE(0x11AB, 0x6121), },
{ } /* terminate list */But not succes.
Log attached.
Any hints are welcome.
Thanks.
Jose Alberto
Dec 16 12:22:58 jar kernel: ata3: PATA max UDMA/100 cmd 0xEC00 ctl 0xE882 bmdma 0xE400 irq 28 Dec 16 12:22:58 jar kernel: ata4: PATA max UDMA/133 cmd 0xE800 ctl 0xE482 bmdma 0xE408 irq 28 Dec 16 12:22:58 jar kernel: scsi3 : pata_marvell Dec 16 12:22:58 jar kernel: BAR5:00:02 01:7F 02:22 03:CA 04:00 05:00 06:00 07:80 08:00 09:00 0A:00 0B:00 0C:07 0D:00 0E:00 0F:00 Dec 16 12:22:58 jar kernel: ATA: abnormal status 0x7F on port 0xEC07 Dec 16 12:22:58 jar kernel: scsi4 : pata_marvell Dec 16 12:22:58 jar kernel: BAR5:00:02 01:7F 02:22 03:CA 04:00 05:00 06:00 07:80 08:00 09:00 0A:00 0B:00 0C:07 0D:00 0E:00 0F:00 Dec 16 12:22:58 jar kernel: ATA: abnormal status 0x7F on port 0xE807
Quoted 2 lines · On Sat, 16 Dec 2006 18:41:26 +0100 Jose Alberto Reguero…
I am trying to make work the driver
pata_marvellof linux-2.6.20-rc1 with Marvell 88SE6121.
The 6121 is I believe ahci.
Quoted 7 lines · Alan
On Sat, 16 Dec 2006 18:41:26 +0100
Quoted 2 lines · Jose Alberto Reguero
I am trying to make work the driver
pata_marvellof linux-2.6.20-rc1 with Marvell 88SE6121.The 6121 is I believe ahci.
So there is no change to make work with pata_marvell ? I thought that 61xx series was similar.
Do you suggest to try with ahci driver?
I atach new log with kernel 2.6.19 and pata_marvell patch.
Thanks.
Jose Alberto
Dec 17 13:07:28 jar kernel: ata3: PATA max UDMA/100 cmd 0xEC00 ctl 0xE882 bmdma 0xE400 irq 28 Dec 17 13:07:28 jar kernel: ata4: PATA max UDMA/133 cmd 0xE800 ctl 0xE482 bmdma 0xE408 irq 28 Dec 17 13:07:28 jar kernel: scsi2 : pata_marvell Dec 17 13:07:28 jar kernel: BAR5:00:02 01:7F 02:22 03:CA 04:00 05:00 06:00 07:80 08:00 09:00 0A:00 0B:00 0C:07 0D:00 0E:00 0F:00 Dec 17 13:07:28 jar kernel: ATA: abnormal status 0x7F on port 0xEC07 Dec 17 13:07:28 jar kernel: scsi3 : pata_marvell Dec 17 13:07:28 jar kernel: BAR5:00:02 01:7F 02:22 03:CA 04:00 05:00 06:00 07:80 08:00 09:00 0A:00 0B:00 0C:07 0D:00 0E:00 0F:00 Dec 17 13:07:28 jar kernel: ATA: abnormal status 0x7F on port 0xE807 Dec 17 13:07:28 jar kernel: ATA: abnormal status 0x7F on port 0xE807 Dec 17 13:07:58 jar kernel: ata4.00: qc timeout (cmd 0xec) Dec 17 13:07:58 jar kernel: ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4) Dec 17 13:07:59 jar kernel: BAR5:00:02 01:7F 02:22 03:CA 04:00 05:00 06:00 07:80 08:00 09:00 0A:00 0B:00 0C:07 0D:00 0E:00 0F:00 Dec 17 13:07:59 jar kernel: ATA: abnormal status 0x7F on port 0xE807 Dec 17 13:07:59 jar kernel: ATA: abnormal status 0x7F on port 0xE807 Dec 17 13:08:29 jar kernel: ata4.00: qc timeout (cmd 0xec) Dec 17 13:08:29 jar kernel: ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4) Dec 17 13:08:29 jar kernel: BAR5:00:02 01:7F 02:22 03:CA 04:00 05:00 06:00 07:80 08:00 09:00 0A:00 0B:00 0C:07 0D:00 0E:00 0F:00 Dec 17 13:08:30 jar kernel: ATA: abnormal status 0x7F on port 0xE807 Dec 17 13:08:30 jar kernel: ATA: abnormal status 0x7F on port 0xE807 Dec 17 13:09:00 jar kernel: ata4.00: qc timeout (cmd 0xec) Dec 17 13:09:00 jar kernel: ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4) Dec 17 13:09:00 jar kernel: BAR5:00:02 01:7F 02:22 03:CA 04:00 05:00 06:00 07:80 08:00 09:00 0A:00 0B:00 0C:07 0D:00 0E:00 0F:00 Dec 17 13:14:30 jar vdr: [3345] connect from 127.0.0.1, port 33449 - accepted
Quoted 11 lines · Jose Alberto Reguero
I am trying to make work the driver
pata_marvellof linux-2.6.20-rc1 with Marvell 88SE6121.
I added the PCI ID:0x6121{ PCI_DEVICE(0x11AB, 0x6101), }, { PCI_DEVICE(0x11AB, 0x6145), }, { PCI_DEVICE(0x11AB, 0x6121), }, { } /* terminate list */But not succes.
It is posible to configure three ports (more than two ports) with this driver?
Thanks.
Jose Alberto