Skip to contentSkip to conversation

s2disk curiosity :)

DISCUSSION Paolo Ornati 2 participants 4 messages Dec 18, 2006 – Jan 2, 2007

lore
Share & tools
lore
#0 lore raw

Hello,

I'm using uswsusp and with commit

	3592695c363c3f3119621bdcf5ed852d6b9d1a5c
	uswsusp: add pmops->{prepare,enter,finish} support (aka "platform mode")

My PC power-light starts flashing during s2disk as expected (comment from the commit that fixes the same thing in in-kernel suspend):

" [PATCH] swsusp: fix platform mode

At some point after 2.6.13, in-kernel software suspend got "incomplete" for the so-called "platform" mode. pm_ops->prepare() is never called. A visible sign of this is the "moon" light on thinkpads not flashing during suspend. Fix by readding the pm_ops->prepare call during suspend."

BUT: another thing that happens is that now my PC powers itself on _without_ pressing the power button (just by plugging the AC power).

I don't like this all that much...

I understand this is probably MOBO specific but, is this behaviour expected/common?

Signature · 2 lines
	Paolo Ornati
	Linux 2.6.20-rc1-g99f5e971 on x86_64
#1 lore raw
Quoted 19 lines · Paolo Ornati

Hello,

I'm using uswsusp and with commit

	3592695c363c3f3119621bdcf5ed852d6b9d1a5c
	uswsusp: add pmops->{prepare,enter,finish} support (aka "platform mode")

My PC power-light starts flashing during s2disk as expected (comment from the commit that fixes the same thing in in-kernel suspend):

" [PATCH] swsusp: fix platform mode

At some point after 2.6.13, in-kernel software suspend got "incomplete" for the so-called "platform" mode. pm_ops->prepare() is never called. A visible sign of this is the "moon" light on thinkpads not flashing during suspend. Fix by readding the pm_ops->prepare call during suspend."

Quoted 8 lines

BUT: another thing that happens is that now my PC powers itself on _without_ pressing the power button (just by plugging the AC power).

I don't like this all that much...

I understand this is probably MOBO specific but, is this behaviour expected/common?

Well, yes.
It depends on the BIOS. Many BIOSes have a setting where you can set the "power fail mode" to "on", "off" or "as before". Now if you enter S4, the BIOS might set the mode temporarily to "on" or whatever.
For example, many notebooks (have not tried lots of desktops :-) do a "very quick boot mode" BIOS itialization if they went through the "proper" S4 sequence. On my toughbook and some FSC notebooks, this speeds up the "power-button to GRUB"-time from ~10 seconds to ~1-2 seconds. The toughbook even resumes from disk by just opening the lid.

This all is, however, BIOS specific. I have also seen BIOSes where it did not matter at all.

If you don't like it, you can easily switch it off by
"echo shutdown > /sys/power/disk" (in-kernel suspend) or by adding "shutdown method = shutdown" to /etc/suspend.conf (userspace suspend). You won't get the blinking light, though :-)

Signature · 3 lines
Stefan Seyfried                  \ "I didn't want to write for pay. I
QA / R&D Team Mobile Devices      \ wanted to be paid for what I write."
SUSE LINUX Products GmbH, Nürnberg \                    -- Leonard Cohen
#2 lore raw
Quoted 2 lines · On Mon, 18 Dec 2006 10:36:24 +0100 Stefan Seyfried <[email protected]> wrote:

It depends on the BIOS. Many BIOSes have a setting where you can set the "power fail mode" to "on", "off" or "as before".

Ok, I've found the BIOS setting: Restore on AC Poer Loss = {Power Off, Power On, Last State}.

Anyway I found strange that the "state" after s2disk is considered "ON" ;)

Signature · 2 lines
	Paolo Ornati
	Linux 2.6.20-rc1-g99f5e971 on x86_64
#3 lore raw
Quoted 11 lines · Paolo Ornati
Quoted 2 lines · On Mon, 18 Dec 2006 10:36:24 +0100 Stefan Seyfried <[email protected]> wrote:

It depends on the BIOS. Many BIOSes have a setting where you can set the "power fail mode" to "on", "off" or "as before".

Ok, I've found the BIOS setting: Restore on AC Poer Loss = {Power Off, Power On, Last State}.

Anyway I found strange that the "state" after s2disk is considered "ON" ;)

Well, that is a decision of your BIOS, 'if the machine was suspended, treat "Restore on AC Power Loss" as "on" temporarily'. I don't know if there is anything that linux can do for you in this case, but you still can at least use shutdown mode to just "not tell the BIOS that we suspended" :-)

Signature · 3 lines
Stefan Seyfried
QA / R&D Team Mobile Devices        |              "Any ideas, John?"
SUSE LINUX Products GmbH, Nürnberg  | "Well, surrounding them's out."