Skip to contentSkip to conversation

backlight control for Frontpath ProGear HX1050+

PATCH In review Marcin Juszkiewicz 4 participants 6 messages Jan 5, 2007

Subsystems (2)
Framebuffer layer Backlight class/subsystem
lore
Share & tools
lore

Marcin Juszkiewicz

author
#0 lore raw

PATCH 1/1 backlight control for Frontpath ProGear HX1050+

From: Marcin Juszkiewicz <[email protected]>

Add control of LCD backlight for Frontpath ProGear HX1050+. Patch is based on http://downloads.sf.net/progear/progear-lcd-0.2.tar.gz
driver by M Schacht.

Signed-off-by Marcin Juszkiewicz <[email protected]>

---
Patch follow kernel version 2.6.19-rc6

 Kconfig      |    8 +++
 Makefile     |    1
 progear_bl.c |  155 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 164 insertions(+)
drivers/video/backlight/Kconfig +8 -0
Index: linux-2.6.18/drivers/video/backlight/Kconfig
===================================================================
@@ -66,3 +66,11 @@
 	  If you have a HP Jornada 680, say y to enable the
 	  backlight driver.
 
+config BACKLIGHT_PROGEAR
+	tristate "Frontpath ProGear Backlight Driver"
+	depends on BACKLIGHT_DEVICE && PCI
+	default y
+	help
+	  If you have a Frontpath ProGear say Y to enable the
+	  backlight driver.
+
drivers/video/backlight/Makefile +1 -0
Index: linux-2.6.18/drivers/video/backlight/Makefile
===================================================================
@@ -5,3 +5,4 @@
 obj-$(CONFIG_BACKLIGHT_CORGI)	+= corgi_bl.o
 obj-$(CONFIG_BACKLIGHT_HP680)	+= hp680_bl.o
 obj-$(CONFIG_BACKLIGHT_LOCOMO)	+= locomolcd.o
+obj-$(CONFIG_BACKLIGHT_PROGEAR)	+= progear_bl.o
drivers/video/backlight/progear_bl.c new file +155 -0

155 lines not on this page · raw message

Signature · 4 lines
JID: hrw-jabber.org
OpenEmbedded developer/consultant

                Great response time! Was that 5 baud or 10?
#1 lore raw

drivers/video/backlight/progear_bl.c line 81

Quoted 12 lines · Marcin Juszkiewicz

Index: linux-2.6.18/drivers/video/backlight/progear_bl.c
===================================================================

drivers/video/backlight/progear_bl.c new file +8 -0
+static int progearbl_probe(struct platform_device *pdev)
+{
+	u8 temp;
+
+	pmu_dev = pci_find_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101, 0);
+	if(!pmu_dev) {
+		printk("ALI M7101 PMU not found.\n"); 
+		return(-1);

There are enumerated constants for these return values. Please use the proper and appropriate constants.

drivers/video/backlight/progear_bl.c line 87

Quoted 6 lines
drivers/video/backlight/progear_bl.c new file +6 -0
+	}
+	
+	sb_dev = pci_find_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, 0);
+	if(!sb_dev) {
+		printk("ALI 1533 SB not found.\n"); 
+		return(-1);

Ditto.

Signature · 3 lines
Russell King
 Linux kernel    2.6 ARM Linux   - http://www.arm.linux.org.uk/
 maintainer of:
author
#2 lore raw
Quoted 7 lines · Russell King

Review

Quoted 3 lines · Marcin Juszkiewicz

Index: linux-2.6.18/drivers/video/backlight/progear_bl.c

(quoted diff) +2 -0
+		printk("ALI M7101 PMU not found.\n");
+		return(-1);

There are enumerated constants for these return values. Please use the proper and appropriate constants.

Thx. Fixed version below.

From: Marcin Juszkiewicz <[email protected]>

Add control of LCD backlight for Frontpath ProGear HX1050+. Patch is based on http://downloads.sf.net/progear/progear-lcd-0.2.tar.gz
driver by M Schacht.

Signed-off-by Marcin Juszkiewicz <[email protected]>

---
Patch follow kernel version 2.6.19-rc6

 Kconfig      |    8 +++
 Makefile     |    1
 progear_bl.c |  155 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 164 insertions(+)
drivers/video/backlight/Kconfig 2007-01-04 22:29:39.000000000 +0100 renamed from drivers/video/backlight/Kconfig 2007-01-04 22:27:59.000000000 +0100 +8 -0
Index: linux-2.6.18/drivers/video/backlight/Kconfig
===================================================================
@@ -66,3 +66,11 @@
         If you have a HP Jornada 680, say y to enable the
         backlight driver.
 
+config BACKLIGHT_PROGEAR
+       tristate "Frontpath ProGear Backlight Driver"
+       depends on BACKLIGHT_DEVICE && PCI
+       default y
+       help
+         If you have a Frontpath ProGear say Y to enable the
+         backlight driver.
+
drivers/video/backlight/Makefile 2007-01-04 22:28:43.000000000 +0100 renamed from drivers/video/backlight/Makefile 2007-01-04 22:27:59.000000000 +0100 +1 -0
Index: linux-2.6.18/drivers/video/backlight/Makefile
===================================================================
@@ -5,3 +5,4 @@
 obj-$(CONFIG_BACKLIGHT_CORGI)  += corgi_bl.o
 obj-$(CONFIG_BACKLIGHT_HP680)  += hp680_bl.o
 obj-$(CONFIG_BACKLIGHT_LOCOMO) += locomolcd.o
+obj-$(CONFIG_BACKLIGHT_PROGEAR)        += progear_bl.o
drivers/video/backlight/progear_bl.c 2007-01-05 08:48:41.000000000 +0100 renamed from dev/null 1970-01-01 00:00:00.000000000 +0000 +155 -0

155 lines not on this page · raw message

Signature · 4 lines
JID: hrw-jabber.org
OpenEmbedded developer/consultant

    42? 7 and a half million years and all you can come up with is 42?!
#3 lore raw
In reply to Marcin Juszkiewicz

drivers/video/backlight/progear_bl.c line 39

Quoted 3 lines
drivers/video/backlight/progear_bl.c new file +2 -0
+struct pci_dev *pmu_dev = NULL;
+struct pci_dev *sb_dev  = NULL;

static ?

drivers/video/backlight/progear_bl.c line 78

Quoted 1 line
drivers/video/backlight/progear_bl.c new file +1 -0
+	pmu_dev = pci_find_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101, 0);

pci_find_device is going away, please use pci_get_device and the get/put functions to refcount it. This makes the system hotplug safe.

author
#4 lore raw
Quoted 4 lines · Alan

Review

Quoted 2 lines
(quoted diff) +2 -0
+struct pci_dev *pmu_dev = NULL;
+struct pci_dev *sb_dev  = NULL;

static ?

static

Quoted 5 lines
Quoted 2 lines
(quoted diff) +1 -0
+	pmu_dev = pci_find_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101,

0);

pci_find_device is going away, please use pci_get_device and the get/put functions to refcount it. This makes the system hotplug safe.

I hope that I got it right. Did not tested it on device yet.

From: Marcin Juszkiewicz <[email protected]>

Add control of LCD backlight for Frontpath ProGear HX1050+. Patch is based on http://downloads.sf.net/progear/progear-lcd-0.2.tar.gz
driver by M Schacht.

Signed-off-by Marcin Juszkiewicz <[email protected]>

---
Patch follow kernel version 2.6.19-rc6

 Kconfig      |    8 +++
 Makefile     |    1
 progear_bl.c |  155 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 164 insertions(+)
drivers/video/backlight/Kconfig +8 -0
Index: linux/drivers/video/backlight/Kconfig
===================================================================
@@ -66,3 +66,11 @@
 	  If you have a HP Jornada 680, say y to enable the
 	  backlight driver.
 
+config BACKLIGHT_PROGEAR
+       tristate "Frontpath ProGear Backlight Driver"
+       depends on BACKLIGHT_DEVICE && PCI
+       default y
+       help
+         If you have a Frontpath ProGear say Y to enable the
+         backlight driver.
+
drivers/video/backlight/Makefile +1 -0
Index: linux/drivers/video/backlight/Makefile
===================================================================
@@ -5,3 +5,4 @@
 obj-$(CONFIG_BACKLIGHT_CORGI)	+= corgi_bl.o
 obj-$(CONFIG_BACKLIGHT_HP680)	+= hp680_bl.o
 obj-$(CONFIG_BACKLIGHT_LOCOMO)	+= locomolcd.o
+obj-$(CONFIG_BACKLIGHT_PROGEAR) += progear_bl.o
drivers/video/backlight/progear_bl.c new file +161 -0

161 lines not on this page · raw message

Signature · 5 lines
JID: hrw-jabber.org
OpenEmbedded developer/consultant

                    Sometimes a cigar is just a cigar.
                    		-- Sigmund Freud
#5 lore raw

Witam Marcin,

Not a big deal.

drivers/video/backlight/progear_bl.c line 150

Quoted 5 lines
drivers/video/backlight/progear_bl.c new file +5 -0
+	if (pmu_dev)
+		pci_dev_put(pmu_dev);
+
+	if (sb_dev)
+		pci_dev_put(sb_dev);

pci_dev_put() can handle NULL argument.

Signature · 3 lines
Pozdrawiam,

	Mariusz Kozlowski