2.6.20-rc3: bt878/bttv: Unknown symbols, despite being defined in module depended on
This seems a bit odd. As the bt878 module loads, I get the following error messages, despite definitions in the bttv module that bt878 depends on:
# egrep '(bttv_read_gpio|bttv_write_gpio|bttv_gpio_enable)' /var/log/dmesg bt878: Unknown symbol bttv_read_gpio bt878: Unknown symbol bttv_write_gpio bt878: Unknown symbol bttv_gpio_enable
SMP kernel, the cpu is an AMD Athlon(tm) 64 X2 Dual Core Processor 5200+.
Full dmesg output is at
http://bugzilla.kernel.org/attachment.cgi?id=9987&action=view (unrelated bug, but same box).
Full config is at
http://bugzilla.kernel.org/attachment.cgi?id=9988&action=view (likewise).
Output of lspci -nn -vvx is at:
http://bugzilla.kernel.org/attachment.cgi?id=9989&action=view (likewise).
# modinfo bt878 | grep depends depends: bttv
# nm dvb/bt8xx/bt878.ko | egrep
'(bttv_read_gpio|bttv_write_gpio|bttv_gpio_enable)'
U bttv_gpio_enable
U bttv_read_gpio
U bttv_write_gpio# nm video/bt8xx/bttv.ko | egrep '(bttv_read_gpio|bttv_write_gpio|bttv_gpio_enable)' 0000000011dc4b6d A __crc_bttv_gpio_enable 00000000bcf2d2fb A __crc_bttv_read_gpio 000000008ecf4acc A __crc_bttv_write_gpio 0000000000000018 r __kcrctab_bttv_gpio_enable 0000000000000020 r __kcrctab_bttv_read_gpio 0000000000000028 r __kcrctab_bttv_write_gpio 0000000000000040 r __kstrtab_bttv_gpio_enable 0000000000000051 r __kstrtab_bttv_read_gpio 0000000000000060 r __kstrtab_bttv_write_gpio 0000000000000030 r __ksymtab_bttv_gpio_enable 0000000000000040 r __ksymtab_bttv_read_gpio 0000000000000050 r __ksymtab_bttv_write_gpio 000000000000898c T bttv_gpio_enable 000000000000894d T bttv_read_gpio 0000000000008909 T bttv_write_gpio
Quoted 8 lines · Leonard Norrgard
This seems a bit odd. As the bt878 module loads, I get the following error messages, despite definitions in the bttv module that bt878 depends on:
# egrep '(bttv_read_gpio|bttv_write_gpio|bttv_gpio_enable)' /var/log/dmesg bt878: Unknown symbol bttv_read_gpio bt878: Unknown symbol bttv_write_gpio bt878: Unknown symbol bttv_gpio_enable
This may be related to MODULE_FORCE_UNLOAD=y.
Best wishes,
Duncan.