2.6.17 - weird, boot CPU (#0) not listed by the BIOS.

I have a Tyan S4881 Thunder K8QW 4 processor (8 cores). Kernel 2.6.16.37 boots and runs fine.
However kernel 2.6.17 and up doesn't. Here is my boot error msg.

kernel /vmlinuz-2.6.17-smp root=/dev/sda5inux version 2.6.17-smp (root@badboy1) (gcc version 4.1.0 (SUSE Linux)) #1 SMP PREEMPT Fri Jan 12 07:53:35 EST 2007 BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 0000000000093800 (usable)
BIOS-e820: 0000000000093800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000c2000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cfea0000 (usable)
BIOS-e820: 00000000cfea0000 - 00000000cfea4000 (ACPI data)
BIOS-e820: 00000000cfea4000 - 00000000cff00000 (ACPI NVS)
BIOS-e820: 00000000cff00000 - 00000000d0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec00400 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
Warning only 4GB will be used.
Use a PAE enabled kernel.
3200MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f71f0
DMI present.
ACPI: PM-Timer IO Port: 0x8008
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] enabled)
Processor #16 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x11] enabled)
Processor #17 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled)
Processor #18 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x13] enabled)
Processor #19 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x14] enabled)
Processor #20 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x15] enabled)
Processor #21 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x16] enabled)
Processor #22 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x17] enabled)
Processor #23 15:1 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x01] address[0xda200000] gsi_base[24])
IOAPIC[1]: apic_id 1, version 17, address 0xda200000, GSI 24-27
ACPI: IOAPIC (id[0x02] address[0xda201000] gsi_base[28])
IOAPIC[2]: apic_id 2, version 17, address 0xda201000, GSI 28-31
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Enabling APIC mode: Flat. Using 3 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at d1000000 (gap: d0000000:10000000) Built 1 zonelists
Kernel command line: root=/dev/sda5 vga=normal resume=/dev/sda2 splash=silent "console=ttyS0,19200"
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2411.454 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 3366304k/4194304k available (1529k kernel code, 38968k reserved, 633k data, 184k init, 2488960k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 4827.61 BogoMIPS (lpj=9655232) Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0(2) -> Core 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 12k freed
ACPI Warning (nsload-0106): Zero-length AML block in table [SSDT] [20060127]
CPU0: AMD Athlon(tm) or Opteron(tm) CPU-model unknown stepping 02 weird, boot CPU (#0) not listed by the BIOS.

It then just reboots. Any ideas what I need to do for 2.6.17 and up kernels. I have tried all the
way up to 2.6.20-rc4.

Thanks
Mark

Quoted 21 lines · Mark Hounschell

I have a Tyan S4881 Thunder K8QW 4 processor (8 cores). Kernel 2.6.16.37 boots and runs fine.
However kernel 2.6.17 and up doesn't. Here is my boot error msg.

kernel /vmlinuz-2.6.17-smp root=/dev/sda5inux version 2.6.17-smp (root@badboy1) (gcc version 4.1.0 (SUSE Linux)) #1 SMP PREEMPT Fri Jan 12 07:53:35 EST 2007 BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 0000000000093800 (usable)
BIOS-e820: 0000000000093800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000c2000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cfea0000 (usable)
BIOS-e820: 00000000cfea0000 - 00000000cfea4000 (ACPI data)
BIOS-e820: 00000000cfea4000 - 00000000cff00000 (ACPI NVS)
BIOS-e820: 00000000cff00000 - 00000000d0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec00400 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
Warning only 4GB will be used.

Quoted 8 lines

Use a PAE enabled kernel.
3200MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f71f0
DMI present.
ACPI: PM-Timer IO Port: 0x8008
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] enabled) Processor #16 15:1 APIC version 16

Quoted 62 lines

ACPI: LAPIC (acpi_id[0x01] lapic_id[0x11] enabled)
Processor #17 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled)
Processor #18 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x13] enabled)
Processor #19 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x14] enabled)
Processor #20 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x15] enabled)
Processor #21 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x16] enabled)
Processor #22 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x17] enabled)
Processor #23 15:1 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x01] address[0xda200000] gsi_base[24]) IOAPIC[1]: apic_id 1, version 17, address 0xda200000, GSI 24-27
ACPI: IOAPIC (id[0x02] address[0xda201000] gsi_base[28]) IOAPIC[2]: apic_id 2, version 17, address 0xda201000, GSI 28-31
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) Enabling APIC mode: Flat. Using 3 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at d1000000 (gap: d0000000:10000000) Built 1 zonelists
Kernel command line: root=/dev/sda5 vga=normal resume=/dev/sda2 splash=silent "console=ttyS0,19200"
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2411.454 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 3366304k/4194304k available (1529k kernel code, 38968k reserved, 633k data, 184k init, 2488960k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 4827.61 BogoMIPS (lpj=9655232) Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0(2) -> Core 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 12k freed
ACPI Warning (nsload-0106): Zero-length AML block in table [SSDT] [20060127]
CPU0: AMD Athlon(tm) or Opteron(tm) CPU-model unknown stepping 02 weird, boot CPU (#0) not listed by the BIOS.

Quoted 7 lines

It then just reboots. Any ideas what I need to do for 2.6.17 and up kernels. I have tried all the
way up to 2.6.20-rc4.

Thanks
Mark

Oh, I'm running in 32 bit mode on SuSE-10.2

Mark
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Quoted 22 lines · Mark Hounschell

Quoted 21 lines · Mark Hounschell

I have a Tyan S4881 Thunder K8QW 4 processor (8 cores). Kernel 2.6.16.37 boots and runs fine.
However kernel 2.6.17 and up doesn't. Here is my boot error msg.

kernel /vmlinuz-2.6.17-smp root=/dev/sda5inux version 2.6.17-smp (root@badboy1) (gcc version 4.1.0 (SUSE Linux)) #1 SMP PREEMPT Fri Jan 12 07:53:35 EST 2007 BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 0000000000093800 (usable)
BIOS-e820: 0000000000093800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000c2000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cfea0000 (usable)
BIOS-e820: 00000000cfea0000 - 00000000cfea4000 (ACPI data)
BIOS-e820: 00000000cfea4000 - 00000000cff00000 (ACPI NVS)
BIOS-e820: 00000000cff00000 - 00000000d0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec00400 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
Warning only 4GB will be used.

Quoted 8 lines

Quoted 8 lines

Use a PAE enabled kernel.
3200MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f71f0
DMI present.
ACPI: PM-Timer IO Port: 0x8008
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] enabled) Processor #16 15:1 APIC version 16

The APIC id for the 1st processor here is 16.
Usually it is 0.

Apparently this has confused some of the smpboot code
with all their new nifty bitmaps for processors online and offline...

Does the latest kernel work any better, say 2.6.19? What if you throw CONFIG_NR_CPUS=32 at it?

-Len

Quoted 69 lines

Quoted 62 lines

ACPI: LAPIC (acpi_id[0x01] lapic_id[0x11] enabled)
Processor #17 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled)
Processor #18 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x13] enabled)
Processor #19 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x14] enabled)
Processor #20 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x15] enabled)
Processor #21 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x16] enabled)
Processor #22 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x17] enabled)
Processor #23 15:1 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x01] address[0xda200000] gsi_base[24]) IOAPIC[1]: apic_id 1, version 17, address 0xda200000, GSI 24-27
ACPI: IOAPIC (id[0x02] address[0xda201000] gsi_base[28]) IOAPIC[2]: apic_id 2, version 17, address 0xda201000, GSI 28-31
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) Enabling APIC mode: Flat. Using 3 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at d1000000 (gap: d0000000:10000000) Built 1 zonelists
Kernel command line: root=/dev/sda5 vga=normal resume=/dev/sda2 splash=silent "console=ttyS0,19200"
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2411.454 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 3366304k/4194304k available (1529k kernel code, 38968k reserved, 633k data, 184k init, 2488960k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 4827.61 BogoMIPS (lpj=9655232) Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0(2) -> Core 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 12k freed
ACPI Warning (nsload-0106): Zero-length AML block in table [SSDT] [20060127]
CPU0: AMD Athlon(tm) or Opteron(tm) CPU-model unknown stepping 02 weird, boot CPU (#0) not listed by the BIOS.

Quoted 7 lines

It then just reboots. Any ideas what I need to do for 2.6.17 and up kernels. I have tried all the
way up to 2.6.20-rc4.

Thanks
Mark

Quoted 9 lines

Oh, I'm running in 32 bit mode on SuSE-10.2

Mark
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Quoted 37 lines · Len Brown

Quoted 22 lines · Mark Hounschell

Quoted 21 lines · Mark Hounschell

I have a Tyan S4881 Thunder K8QW 4 processor (8 cores). Kernel 2.6.16.37 boots and runs fine.
However kernel 2.6.17 and up doesn't. Here is my boot error msg.

kernel /vmlinuz-2.6.17-smp root=/dev/sda5inux version 2.6.17-smp (root@badboy1) (gcc version 4.1.0 (SUSE Linux)) #1 SMP PREEMPT Fri Jan 12 07:53:35 EST 2007 BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 0000000000093800 (usable)
BIOS-e820: 0000000000093800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000c2000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cfea0000 (usable)
BIOS-e820: 00000000cfea0000 - 00000000cfea4000 (ACPI data)
BIOS-e820: 00000000cfea4000 - 00000000cff00000 (ACPI NVS)
BIOS-e820: 00000000cff00000 - 00000000d0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec00400 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
Warning only 4GB will be used.

Quoted 8 lines

Quoted 8 lines

Use a PAE enabled kernel.
3200MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f71f0
DMI present.
ACPI: PM-Timer IO Port: 0x8008
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] enabled) Processor #16 15:1 APIC version 16

The APIC id for the 1st processor here is 16.
Usually it is 0.

Apparently this has confused some of the smpboot code
with all their new nifty bitmaps for processors online and offline...

Quoted 5 lines

Does the latest kernel work any better, say 2.6.19? What if you throw CONFIG_NR_CPUS=32 at it?

-Len

CONFIG_NR_CPUS is set to 32. Even 2.6.20-rc4 does this.

Quoted 84 lines

Quoted 69 lines

Quoted 62 lines

ACPI: LAPIC (acpi_id[0x01] lapic_id[0x11] enabled)
Processor #17 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled)
Processor #18 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x13] enabled)
Processor #19 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x14] enabled)
Processor #20 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x15] enabled)
Processor #21 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x16] enabled)
Processor #22 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x17] enabled)
Processor #23 15:1 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x01] address[0xda200000] gsi_base[24]) IOAPIC[1]: apic_id 1, version 17, address 0xda200000, GSI 24-27
ACPI: IOAPIC (id[0x02] address[0xda201000] gsi_base[28]) IOAPIC[2]: apic_id 2, version 17, address 0xda201000, GSI 28-31
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) Enabling APIC mode: Flat. Using 3 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at d1000000 (gap: d0000000:10000000) Built 1 zonelists
Kernel command line: root=/dev/sda5 vga=normal resume=/dev/sda2 splash=silent "console=ttyS0,19200"
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2411.454 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 3366304k/4194304k available (1529k kernel code, 38968k reserved, 633k data, 184k init, 2488960k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 4827.61 BogoMIPS (lpj=9655232) Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0(2) -> Core 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 12k freed
ACPI Warning (nsload-0106): Zero-length AML block in table [SSDT] [20060127]
CPU0: AMD Athlon(tm) or Opteron(tm) CPU-model unknown stepping 02 weird, boot CPU (#0) not listed by the BIOS.

Quoted 7 lines

It then just reboots. Any ideas what I need to do for 2.6.17 and up kernels. I have tried all the
way up to 2.6.20-rc4.

Thanks
Mark

Quoted 9 lines

Oh, I'm running in 32 bit mode on SuSE-10.2

Mark
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/