prioritize PCI traffic ?
Dear all,
is it possible to explicitly tell the kernel to prioritize PCI traffic for a number of cards in pci slots x,y,z ?
I am asking as severe ide traffic causes lost frames when watching TV using 2 DVB cards + vdr... This is simply due to the fact that the PCI bus is saturated...
So, is any prioritizing of the PCI bus possible ?
Best
Soeren
Signature · 2 lines
Sometimes, there's a moment as you're waking, when you become aware of the real world around you, but you're still dreaming.
Hi,
Quoted 10 lines · Soeren Sonnenburg
Dear all,
is it possible to explicitly tell the kernel to prioritize PCI traffic for a number of cards in pci slots x,y,z ?
I am asking as severe ide traffic causes lost frames when watching TV using 2 DVB cards + vdr... This is simply due to the fact that the PCI bus is saturated...
So, is any prioritizing of the PCI bus possible ?
You probably need to adjust PCI latency settings via setpci:
http://www-128.ibm.com/developerworks/library/l-hw2.html
Not sure whether this is a LKML related question ;)
Andreas Mohr
Quoted 12 lines · Andreas Mohr
Hi,
Quoted 9 lines · Soeren Sonnenburg
Dear all,
is it possible to explicitly tell the kernel to prioritize PCI traffic for a number of cards in pci slots x,y,z ?
I am asking as severe ide traffic causes lost frames when watching TV using 2 DVB cards + vdr... This is simply due to the fact that the PCI bus is saturated...
Quoted 5 lines
Quoted 1 line
So, is any prioritizing of the PCI bus possible ?
You probably need to adjust PCI latency settings via setpci:
Thanks, but I already tried this...
Quoted 1 line
Not sure whether this is a LKML related question ;)
Well I already tried to set maximum latencies etc to the cards to prioritize to no avail... This did not make a difference though. Maybe this is due to the fact that a lot more has to be transferred (not just sound, but video data) and this is not possible in a single transaction ... ?!
Soeren
Signature · 2 lines
Sometimes, there's a moment as you're waking, when you become aware of the real world around you, but you're still dreaming.
Quoted 8 lines · Soeren Sonnenburg
Dear all,
is it possible to explicitly tell the kernel to prioritize PCI traffic for a number of cards in pci slots x,y,z ?
I am asking as severe ide traffic causes lost frames when watching TV using 2 DVB cards + vdr... This is simply due to the fact that the PCI bus is saturated...
How do you know that the bus is saturated?
Are you streaming data to/from the ide hard disks/CDROM? Do you have DMAs 'ON' for the hard disks?
Is everything just fine if there are no IDE traffic? Are you running 2.6 kernel with preempt 'ON'?
Are all hardware on the same IRQ line? (shared interrupts)
Quoted 1 line
So, is any prioritizing of the PCI bus possible ?
The drivers + application indirectly can control priority on the bus. Just reduce the priority of the application that uses IDE and see if adjusting nice values of applications can change the scenario.
--Vaidy
Quoted 11 lines
Best
Soeren
--
Sometimes, there's a moment as you're waking, when you become aware of the real world around you, but you're still dreaming.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Quoted 11 lines · Vaidyanathan Srinivasan
Quoted 8 lines · Soeren Sonnenburg
Dear all,
is it possible to explicitly tell the kernel to prioritize PCI traffic for a number of cards in pci slots x,y,z ?
I am asking as severe ide traffic causes lost frames when watching TV using 2 DVB cards + vdr... This is simply due to the fact that the PCI bus is saturated...
How do you know that the bus is saturated?
I simply dd if=/dev/sd? of=/dev/null from four brand new sata-harddisks.
Quoted 1 line
Are you streaming data to/from the ide hard disks/CDROM?
yes.
Quoted 1 line
Do you have DMAs 'ON' for the hard disks?
yes.
Quoted 1 line
Is everything just fine if there are no IDE traffic?
yes.
Quoted 1 line
Are you running 2.6 kernel with preempt 'ON'?
no: CONFIG_PREEMPT_NONE=y
Quoted 1 line
Are all hardware on the same IRQ line? (shared interrupts)
no: libata devices are on IRQ 16 and DVB devices on IRQ 20
Quoted 5 lines
Quoted 1 line
So, is any prioritizing of the PCI bus possible ?
The drivers + application indirectly can control priority on the bus. Just reduce the priority of the application that uses IDE and see if adjusting nice values of applications can change the scenario.
That unfortunately did not help... no change...
Soeren
Signature · 2 lines
Sometimes, there's a moment as you're waking, when you become aware of the real world around you, but you're still dreaming.
Quoted 14 lines · Soeren Sonnenburg
Quoted 10 lines · Vaidyanathan Srinivasan
Quoted 8 lines · Soeren Sonnenburg
Dear all,
is it possible to explicitly tell the kernel to prioritize PCI traffic for a number of cards in pci slots x,y,z ?
I am asking as severe ide traffic causes lost frames when watching TV using 2 DVB cards + vdr... This is simply due to the fact that the PCI bus is saturated...
How do you know that the bus is saturated?
I simply dd if=/dev/sd? of=/dev/null from four brand new sata-harddisks.
Quoted 7 lines
Quoted 1 line
Are you streaming data to/from the ide hard disks/CDROM?
yes.
Quoted 1 line
Do you have DMAs 'ON' for the hard disks?
yes.
Good.
Quoted 3 lines
Quoted 1 line
Is everything just fine if there are no IDE traffic?
yes.
Good.
Quoted 4 lines
Quoted 1 line
Are you running 2.6 kernel with preempt 'ON'?
no:
CONFIG_PREEMPT_NONE=y
Try CONFIG_PREEMPT=y it may help. It made the system more responsive for me.
Quoted 3 lines
Quoted 1 line
Are all hardware on the same IRQ line? (shared interrupts)
no: libata devices are on IRQ 16 and DVB devices on IRQ 20
Watch the interrupt count (/proc/interrupts) and interrupt rate, that may give some clue on what is happening on the PCI bus.
Quoted 7 lines
Quoted 5 lines
Quoted 2 lines
So, is any prioritizing of the PCI bus possible ?
The drivers + application indirectly can control priority on the bus. Just reduce the priority of the application that uses IDE and see if adjusting nice values of applications can change the scenario.
That unfortunately did not help... no change...
33Mhz 32-bit PCI bus on typical PC can do around 100MB/sec... watch your individual disk transfer rates and data rate to each DVB. dd from 4 new SATA drive will probably fillup the bus. However, depending on your motherboard, the integrated SATA controllers may be on a different PCI bus than the one for the slots.
You can watch the lspci output to determine which bus the devices are located.
--Vaidy
Quoted 5 lines
Soeren
--
Sometimes, there's a moment as you're waking, when you become aware of the real world around you, but you're still dreaming.
Am Montag, 15. Januar 2007 15:53 schrieb Vaidyanathan Srinivasan:
Quoted 2 lines
33Mhz 32-bit PCI bus on typical PC can do around 100MB/sec...
Substract roughly n * 5MB for VIA chipsets, where n is the age (1 <= n <= 4), and even more for SIS, ATI..
Pete
Quoted 6 lines · Hans-Peter Jansen
Am Montag, 15. Januar 2007 15:53 schrieb Vaidyanathan Srinivasan:
Quoted 2 lines
33Mhz 32-bit PCI bus on typical PC can do around 100MB/sec...
Substract roughly n * 5MB for VIA chipsets, where n is the age (1 <= n <= 4), and even more for SIS, ATI..
While developing the latency tracer in the -rt kernel, Ingo and others discovered that some SATA controllers can produce very bad DMA starvation at higher speeds. A latency trace of such an event looks like the entire system is going in slow motion. Presumably, vendors do this to improve benchmark scores.
Try forcing your drives to a lower speed.
Lee