W83793: fix the fan input detection

Hello,

Our driver does not check for second possible location, where the fan in pin can be routed. Personally I think looking just for "enable monitor" would be enough, but lets extend the scheme we have already in the driver, so we won't break it.

This patch extends the fan configuration detection, catches the cases when alternative pins are used to route the fan input.

Rudolf
-------------- next part --------------
A non-text attachment was scrubbed...
Name: hwmon-w83793-fan-enable.patch
Type: text/x-patch
Size: 920 bytes
Desc: not available
Url : http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20070114/c9fb416a/attachment.bin

Hi, Jean

W83793: fix the fan input detection, catches the cases when alternative pins are used to route the fan9-12 input.

The patch looks OK, I have tested it on my motherboard, please apply.

Best regards
Gong Jun

=============================================The privileged confidential information contained in this email is intended for use only by the addressees as indicated by the original sender of this email. If you are not the addressee indicated in this email or are not responsible for delivery of the email to such a person, please kindly reply to the sender indicating this fact and delete all copies of it from your computer and network server immediately. Your cooperation is highly appreciated. It is advised that any unauthorized use of confidential information of Winbond is strictly prohibited; and any information in this email irrelevant to the official business of Winbond shall be deemed as neither given nor endorsed by Winbond. -------------- next part --------------
A non-text attachment was scrubbed...
Name: hwmon-w83793-fan-enable.patch
Type: application/octet-stream
Size: 946 bytes
Desc: hwmon-w83793-fan-enable.patch
Url : http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20070116/84674a08/attachment.obj

Applied, thanks.

Jean Delvare