Suspend to RAM generates oops and general protection fault
Subsystems (2)
Hi,
I just encountered the following oops and general protection fault trying to suspend/resume my laptop. I've got a Dell D820 laptop with a 2 GHz Core 2 Duo CPU. It usually suspends/resumes fine but not always. The relevant errors are below but the full dmesg log is at
http://people.xiph.org/~jm/suspend_resume_oops.txt and my config is in
http://people.xiph.org/~jm/config-2.6.20-rc5.txt
This happens when I'm running 2.6.20-rc5. The previous kernel version I was using is 2.6.19-rc6 and was much more broken (second attempt *always* failed), so it's probably not a regression.
Cheers,
Jean-Marc
P.S. This is the same laptop I had at LCA for which Linus told me to disable preemption and try the newest rc version.
[10746.449071] Unable to handle kernel NULL pointer dereference at 0000000000000038 RIP: [10746.449080] [<ffffffff8022b9c8>] iput+0x18/0x80 [10746.449092] PGD 3a607067 PUD 27b20067 PMD 0 [10746.449099] Oops: 0000 [1] SMP [10746.449104] CPU 0 [10746.449107] Modules linked in: psmouse battery ac thermal fan button
ipw3945 ieee80211 tg3 arc4 ecb blkcipher ieee80211_crypt_wep ieee80211_crypt binfmt_misc rfcomm l2cap bluetooth i915 drm speedstep_centrino cpufreq_userspace cpufreq_powersave cpufreq_ondemand cpufreq_stats freq_table cpufreq_conservative video sbs i2c_ec dock asus_acpi backlight container ipv6 fuse sbp2 af_packet parport_pc lp parport sg sr_mod cdrom snd_hda_intel snd_hda_codec tsdev snd_pcm_oss snd_mixer_oss pcmcia snd_pcm snd_timer ata_generic snd shpchp pci_hotplug soundcore snd_page_alloc serio_raw yenta_socket rsrc_nonstatic pcmcia_core pcspkr evdev ext3 jbd mbcache ohci1394 ehci_hcd ieee1394 ide_generic uhci_hcd usbcore generic sd_mod processor
[10746.449190] Pid: 218, comm: kswapd0 Not tainted 2.6.20-rc5-x86-64 #1 [10746.449196] RIP: 0010:[<ffffffff8022b9c8>] [<ffffffff8022b9c8>] iput+0x18/0x80 [10746.449206] RSP: 0000:ffff810037f2dd50 EFLAGS: 00010283 [10746.449212] RAX: 0000000000000000 RBX: ffff81000003fcf0 RCX: ffff81000003fd20 [10746.449219] RDX: 0000000000000001 RSI: 0000000000000286 RDI: ffff81000003fcf0 [10746.449225] RBP: 0000000000000042 R08: 0000000000000000 R09: 0000000000000000 [10746.449232] R10: 28f5c28f5c28f5c3 R11: ffffffff8023ae90 R12: 0000000000000000 [10746.449239] R13: ffff810075721c70 R14: ffffffff805fa940 R15: 0000000000000000 [10746.449246] FS: 0000000000000000(0000) GS:ffffffff8058e000(0000) knlGS:0000000000000000 [10746.449253] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b [10746.449259] CR2: 0000000000000038 CR3: 000000001207f000 CR4: 00000000000006e0 [10746.449265] Process kswapd0 (pid: 218, threadinfo ffff810037f2c000, task ffff810037a1b760) [10746.449269] Stack: ffff8100001ce2f0 ffffffff802ddaf8 ffff8100001ce3c0 ffff8100001ce2f0 [10746.449280] 0000000000000042 ffffffff8022f645 ffff810037f2dd80 000000000001cb60 [10746.449288] 0000000000000090 ffff81007daa0e00 00000000000000d0 ffffffff802ddb49 [10746.449296] Call Trace: [10746.449305] [<ffffffff802ddaf8>] prune_one_dentry+0x68/0xa0 [10746.449314] [<ffffffff8022f645>] prune_dcache+0x145/0x1e0 [10746.449323] [<ffffffff802ddb49>] shrink_dcache_memory+0x19/0x50 [10746.449331] [<ffffffff802418a7>] shrink_slab+0x117/0x190 [10746.449342] [<ffffffff8025a392>] kswapd+0x382/0x4e0 [10746.449356] [<ffffffff802a13b0>] autoremove_wake_function+0x0/0x30 [10746.449370] [<ffffffff8025a010>] kswapd+0x0/0x4e0 [10746.449376] [<ffffffff802a11d0>] keventd_create_kthread+0x0/0x90 [10746.449383] [<ffffffff802335a9>] kthread+0xd9/0x120 [10746.449394] [<ffffffff80260ec8>] child_rip+0xa/0x12 [10746.449401] [<ffffffff802a11d0>] keventd_create_kthread+0x0/0x90 [10746.449414] [<ffffffff802334d0>] kthread+0x0/0x120 [10746.449421] [<ffffffff80260ebe>] child_rip+0x0/0x12 [10746.449426] [10746.449429] [10746.449430] Code: 48 8b 40 38 75 04 0f 0b eb fe 48 85 c0 74 0b 48 8b 40 28 48 [10746.449449] RIP [<ffffffff8022b9c8>] iput+0x18/0x80 [10746.449456] RSP <ffff810037f2dd50> [10746.449460] CR2: 0000000000000038 [10746.449463] ACPI Exception (pci_bind-0299): AE_NOT_FOUND, Unable to
get data from device DCKS [20060707]
and later:
[ 3.668009] SMP alternatives: switching to SMP code [ 3.668168] Booting processor 1/2 APIC 0x1 [ 4.149691] Initializing CPU#1 [ 4.229595] Calibrating delay using timer specific routine.. 3990.32 BogoMIPS (lpj=7980654) [ 4.229602] CPU: L1 I cache: 32K, L1 D cache: 32K [ 4.229604] CPU: L2 cache: 4096K [ 4.229606] CPU 1/1 -> Node 0 [ 4.229608] CPU: Physical Processor ID: 0 [ 4.229609] CPU: Processor Core ID: 1 [ 4.230107] Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06 [ 4.233607] CPU 1: Syncing TSC to CPU 0. [ 3.762970] CPU 1: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 960 cycles) [ 3.764689] general protection fault: 0000 [2] SMP [ 3.764963] CPU 1 [ 3.764983] Modules linked in: psmouse battery ac thermal fan button
arc4 ecb blkcipher ieee80211_crypt_wep ieee80211_crypt binfmt_misc rfcomm l2cap bluetooth i915 drm speedstep_centrino cpufreq_userspace cpufreq_powersave cpufreq_ondemand cpufreq_stats freq_table cpufreq_conservative video sbs i2c_ec dock asus_acpi backlight container ipv6 fuse sbp2 af_packet parport_pc lp parport sg sr_mod cdrom snd_hda_intel snd_hda_codec tsdev snd_pcm_oss snd_mixer_oss pcmcia snd_pcm snd_timer ata_generic snd shpchp pci_hotplug soundcore snd_page_alloc serio_raw yenta_socket rsrc_nonstatic pcmcia_core pcspkr evdev ext3 jbd mbcache ohci1394 ehci_hcd ieee1394 ide_generic uhci_hcd usbcore generic sd_mod processor
[ 3.765304] Pid: 7824, comm: sleep.sh Not tainted 2.6.20-rc5-x86-64 #1 [ 3.765330] RIP: 0010:[<ffffffff80289c45>] [<ffffffff80289c45>] task_rq_lock+0x35/0x90 [ 3.765379] RSP: 0018:ffff81001d291d28 EFLAGS: 00010086 [ 3.765403] RAX: 6e696c7761726320 RBX: ffffffff805f88a0 RCX: 0000000000000000 [ 3.765431] RDX: 0000000000000000 RSI: ffff81001d291db0 RDI: ffff810037a1b760 [ 3.765460] RBP: ffff81001d291d48 R08: 0000000000000000 R09: 0000000000000000 [ 3.765488] R10: 0000000000000001 R11: 0000000000000000 R12: ffffffff805f88a0 [ 3.765516] R13: ffff810037a1b760 R14: ffff81001d291db0 R15: ffff81000a9e3e80 [ 3.765546] FS: 00002b1bcd567ae0(0000) GS:ffff810037ad1cc0(0000) knlGS:0000000000000000 [ 3.765589] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 3.765615] CR2: 0000000000000000 CR3: 000000001d4d0000 CR4: 00000000000006a0 [ 3.765645] Process sleep.sh (pid: 7824, threadinfo ffff81001d290000, task ffff8100661cf080) [ 3.765689] Stack: ffff810037a1b760 0000000000000002 0000000000000003 0000000000000003 [ 3.765739] ffff81001d291dd8 ffffffff8028c454 0000000000000001 0000000000000003 [ 3.765786] 0000000000000000 0000000000000002 ffffffff8058e4c0 0000000000000003 [ 3.765822] Call Trace: [ 3.765861] [<ffffffff8028c454>] set_cpus_allowed+0x24/0xc0 [ 3.765890] [<ffffffff8033cf3b>] kobject_register+0x3b/0x50 [ 3.765919] [<ffffffff80292850>] cpu_callback+0x50/0x70 [ 3.765949] [<ffffffff80269406>] notifier_call_chain+0x26/0x40 [ 3.765980] [<ffffffff802a704c>] _cpu_up+0xbc/0xf0 [ 3.766005] [<ffffffff802a70b2>] cpu_up+0x32/0x60 [ 3.766030] [<ffffffff802a712b>] enable_nonboot_cpus+0x4b/0xa0 [ 3.766057] [<ffffffff802aba8b>] enter_state+0x15b/0x1b0 [ 3.766083] [<ffffffff802abb5b>] state_store+0x7b/0xb0 [ 3.766112] [<ffffffff80306c09>] sysfs_write_file+0xd9/0x120 [ 3.766143] [<ffffffff8021653e>] vfs_write+0xde/0x1a0 [ 3.766169] [<ffffffff80217073>] sys_write+0x53/0x90 [ 3.766197] [<ffffffff8026011e>] system_call+0x7e/0x83 [ 3.766228] [ 3.766247] [ 3.766248] Code: 8b 40 18 48 8b 04 c5 80 f2 59 80 48 03 58 08 48 89 df e8 54 [ 3.766331] RIP [<ffffffff80289c45>] task_rq_lock+0x35/0x90 [ 3.766359] RSP <ffff81001d291d28> [ 3.766650] <6>ata1.00: configured for UDMA/133
Hi.
Quoted 9 lines · Jean-Marc Valin
Hi,
I just encountered the following oops and general protection fault trying to suspend/resume my laptop. I've got a Dell D820 laptop with a 2 GHz Core 2 Duo CPU. It usually suspends/resumes fine but not always. The relevant errors are below but the full dmesg log is at
http://people.xiph.org/~jm/suspend_resume_oops.txt and my config is in
http://people.xiph.org/~jm/config-2.6.20-rc5.txt
Quoted 3 lines
This happens when I'm running 2.6.20-rc5. The previous kernel version I was using is 2.6.19-rc6 and was much more broken (second attempt *always* failed), so it's probably not a regression.
A second attempt always failing usually indicates that a driver was dazed and confused after the first cycle and properly killed by the second attempt, usually because of a lack of [proper] power management code.
Between any two versions, some things can be fixed, some things can be broken and some things can become broken in different ways, so your different experience with 2.6.20-rc5 doesn't necessarily mean that this is a different issue.
It looks like something is stomping on memory it shouldn't be touching, so I would suggest testing multiple cycles with a minimal (preferably zero) number of modules loaded. If that looks good and reliable, add modules & processes until you can say 'If I do X, it breaks.'. If having a minimal number of modules loaded doesn't help, I would then suggest reviewing your kernel config to see if other things can be built as modules and the same logic applied. You can be reasonably sure that it will be a device driver. Common causes of suspend/resume problems from the list you give below are acpi modules, bluetooth and usb. I'd also be consider pcmcia, drm and fuse possibilities. But again, go for unloading everything possible in the first instance.
Regards,
Nigel
Quoted 159 lines
Cheers,
Jean-Marc
P.S. This is the same laptop I had at LCA for which Linus told me to disable preemption and try the newest rc version.[10746.449071] Unable to handle kernel NULL pointer dereference at 0000000000000038 RIP: [10746.449080] [<ffffffff8022b9c8>] iput+0x18/0x80 [10746.449092] PGD 3a607067 PUD 27b20067 PMD 0 [10746.449099] Oops: 0000 [1] SMP [10746.449104] CPU 0 [10746.449107] Modules linked in: psmouse battery ac thermal fan buttonipw3945 ieee80211 tg3 arc4 ecb blkcipher
ieee80211_crypt_wepieee80211_cryptbinfmt_miscrfcomm l2cap bluetooth i915 drmspeedstep_centrinocpufreq_userspacecpufreq_powersavecpufreq_ondemandcpufreq_statsfreq_tablecpufreq_conservativevideo sbsi2c_ecdockasus_acpibacklight container ipv6 fuse sbp2af_packetparport_pclp parport sgsr_modcdromsnd_hda_intelsnd_hda_codectsdevsnd_pcm_osssnd_mixer_osspcmciasnd_pcmsnd_timerata_genericsnd shpchppci_hotplugsoundcoresnd_page_allocserio_rawyenta_socketrsrc_nonstaticpcmcia_corepcspkr evdev ext3 jbd mbcache ohci1394ehci_hcdieee1394ide_genericuhci_hcdusbcore genericsd_modprocessor[10746.449190] Pid: 218, comm: kswapd0 Not tainted 2.6.20-rc5-x86-64 #1 [10746.449196] RIP: 0010:[<ffffffff8022b9c8>] [<ffffffff8022b9c8>] iput+0x18/0x80 [10746.449206] RSP: 0000:ffff810037f2dd50 EFLAGS: 00010283 [10746.449212] RAX: 0000000000000000 RBX: ffff81000003fcf0 RCX: ffff81000003fd20 [10746.449219] RDX: 0000000000000001 RSI: 0000000000000286 RDI: ffff81000003fcf0 [10746.449225] RBP: 0000000000000042 R08: 0000000000000000 R09: 0000000000000000 [10746.449232] R10: 28f5c28f5c28f5c3 R11: ffffffff8023ae90 R12: 0000000000000000 [10746.449239] R13: ffff810075721c70 R14: ffffffff805fa940 R15: 0000000000000000 [10746.449246] FS: 0000000000000000(0000) GS:ffffffff8058e000(0000) knlGS:0000000000000000 [10746.449253] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b [10746.449259] CR2: 0000000000000038 CR3: 000000001207f000 CR4: 00000000000006e0 [10746.449265] Process kswapd0 (pid: 218, threadinfo ffff810037f2c000, task ffff810037a1b760) [10746.449269] Stack: ffff8100001ce2f0 ffffffff802ddaf8 ffff8100001ce3c0 ffff8100001ce2f0 [10746.449280] 0000000000000042 ffffffff8022f645 ffff810037f2dd80 000000000001cb60 [10746.449288] 0000000000000090 ffff81007daa0e00 00000000000000d0 ffffffff802ddb49 [10746.449296] Call Trace: [10746.449305] [<ffffffff802ddaf8>] prune_one_dentry+0x68/0xa0 [10746.449314] [<ffffffff8022f645>] prune_dcache+0x145/0x1e0 [10746.449323] [<ffffffff802ddb49>] shrink_dcache_memory+0x19/0x50 [10746.449331] [<ffffffff802418a7>] shrink_slab+0x117/0x190 [10746.449342] [<ffffffff8025a392>] kswapd+0x382/0x4e0 [10746.449356] [<ffffffff802a13b0>] autoremove_wake_function+0x0/0x30 [10746.449370] [<ffffffff8025a010>] kswapd+0x0/0x4e0 [10746.449376] [<ffffffff802a11d0>] keventd_create_kthread+0x0/0x90 [10746.449383] [<ffffffff802335a9>] kthread+0xd9/0x120 [10746.449394] [<ffffffff80260ec8>] child_rip+0xa/0x12 [10746.449401] [<ffffffff802a11d0>] keventd_create_kthread+0x0/0x90 [10746.449414] [<ffffffff802334d0>] kthread+0x0/0x120 [10746.449421] [<ffffffff80260ebe>] child_rip+0x0/0x12 [10746.449426] [10746.449429] [10746.449430] Code: 48 8b 40 38 75 04 0f 0b eb fe 48 85 c0 74 0b 48 8b 40 28 48 [10746.449449] RIP [<ffffffff8022b9c8>] iput+0x18/0x80 [10746.449456] RSP <ffff810037f2dd50> [10746.449460] CR2: 0000000000000038 [10746.449463] ACPI Exception (pci_bind-0299): AE_NOT_FOUND, Unable toget data from device DCKS [20060707]
and later:
[ 3.668009] SMP alternatives: switching to SMP code [ 3.668168] Booting processor 1/2 APIC 0x1 [ 4.149691] Initializing CPU#1 [ 4.229595] Calibrating delay using timer specific routine.. 3990.32 BogoMIPS (lpj=7980654) [ 4.229602] CPU: L1 I cache: 32K, L1 D cache: 32K [ 4.229604] CPU: L2 cache: 4096K [ 4.229606] CPU 1/1 -> Node 0 [ 4.229608] CPU: Physical Processor ID: 0 [ 4.229609] CPU: Processor Core ID: 1 [ 4.230107] Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06 [ 4.233607] CPU 1: Syncing TSC to CPU 0. [ 3.762970] CPU 1: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 960 cycles) [ 3.764689] general protection fault: 0000 [2] SMP [ 3.764963] CPU 1 [ 3.764983] Modules linked in: psmouse battery ac thermal fan buttonarc4 ecb blkcipher
ieee80211_crypt_wepieee80211_cryptbinfmt_miscrfcomm l2cap bluetooth i915 drmspeedstep_centrinocpufreq_userspacecpufreq_powersavecpufreq_ondemandcpufreq_statsfreq_tablecpufreq_conservativevideo sbsi2c_ecdockasus_acpibacklight container ipv6 fuse sbp2af_packetparport_pclp parport sgsr_modcdromsnd_hda_intelsnd_hda_codectsdevsnd_pcm_osssnd_mixer_osspcmciasnd_pcmsnd_timerata_genericsnd shpchppci_hotplugsoundcoresnd_page_allocserio_rawyenta_socketrsrc_nonstaticpcmcia_corepcspkr evdev ext3 jbd mbcache ohci1394ehci_hcdieee1394ide_genericuhci_hcdusbcore genericsd_modprocessor[ 3.765304] Pid: 7824, comm: sleep.sh Not tainted 2.6.20-rc5-x86-64 #1 [ 3.765330] RIP: 0010:[<ffffffff80289c45>] [<ffffffff80289c45>] task_rq_lock+0x35/0x90 [ 3.765379] RSP: 0018:ffff81001d291d28 EFLAGS: 00010086 [ 3.765403] RAX: 6e696c7761726320 RBX: ffffffff805f88a0 RCX: 0000000000000000 [ 3.765431] RDX: 0000000000000000 RSI: ffff81001d291db0 RDI: ffff810037a1b760 [ 3.765460] RBP: ffff81001d291d48 R08: 0000000000000000 R09: 0000000000000000 [ 3.765488] R10: 0000000000000001 R11: 0000000000000000 R12: ffffffff805f88a0 [ 3.765516] R13: ffff810037a1b760 R14: ffff81001d291db0 R15: ffff81000a9e3e80 [ 3.765546] FS: 00002b1bcd567ae0(0000) GS:ffff810037ad1cc0(0000) knlGS:0000000000000000 [ 3.765589] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 3.765615] CR2: 0000000000000000 CR3: 000000001d4d0000 CR4: 00000000000006a0 [ 3.765645] Process sleep.sh (pid: 7824, threadinfo ffff81001d290000, task ffff8100661cf080) [ 3.765689] Stack: ffff810037a1b760 0000000000000002 0000000000000003 0000000000000003 [ 3.765739] ffff81001d291dd8 ffffffff8028c454 0000000000000001 0000000000000003 [ 3.765786] 0000000000000000 0000000000000002 ffffffff8058e4c0 0000000000000003 [ 3.765822] Call Trace: [ 3.765861] [<ffffffff8028c454>] set_cpus_allowed+0x24/0xc0 [ 3.765890] [<ffffffff8033cf3b>] kobject_register+0x3b/0x50 [ 3.765919] [<ffffffff80292850>] cpu_callback+0x50/0x70 [ 3.765949] [<ffffffff80269406>] notifier_call_chain+0x26/0x40 [ 3.765980] [<ffffffff802a704c>] _cpu_up+0xbc/0xf0 [ 3.766005] [<ffffffff802a70b2>] cpu_up+0x32/0x60 [ 3.766030] [<ffffffff802a712b>] enable_nonboot_cpus+0x4b/0xa0 [ 3.766057] [<ffffffff802aba8b>] enter_state+0x15b/0x1b0 [ 3.766083] [<ffffffff802abb5b>] state_store+0x7b/0xb0 [ 3.766112] [<ffffffff80306c09>] sysfs_write_file+0xd9/0x120 [ 3.766143] [<ffffffff8021653e>] vfs_write+0xde/0x1a0 [ 3.766169] [<ffffffff80217073>] sys_write+0x53/0x90 [ 3.766197] [<ffffffff8026011e>] system_call+0x7e/0x83 [ 3.766228] [ 3.766247] [ 3.766248] Code: 8b 40 18 48 8b 04 c5 80 f2 59 80 48 03 58 08 48 89 df e8 54 [ 3.766331] RIP [<ffffffff80289c45>] task_rq_lock+0x35/0x90 [ 3.766359] RSP <ffff81001d291d28> [ 3.766650] <6>ata1.00: configured for UDMA/133-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Quoted 6 lines
Quoted 6 lines
I just encountered the following oops and general protection fault trying to suspend/resume my laptop. I've got a Dell D820 laptop with a 2 GHz Core 2 Duo CPU. It usually suspends/resumes fine but not always. The relevant errors are below but the full dmesg log is at
http://people.xiph.org/~jm/suspend_resume_oops.txt and my config is in
http://people.xiph.org/~jm/config-2.6.20-rc5.txt
...
Quoted 11 lines
It looks like something is stomping on memory it shouldn't be touching, so I would suggest testing multiple cycles with a minimal (preferably zero) number of modules loaded. If that looks good and reliable, add modules & processes until you can say 'If I do X, it breaks.'. If having a minimal number of modules loaded doesn't help, I would then suggest reviewing your kernel config to see if other things can be built as modules and the same logic applied. You can be reasonably sure that it will be a device driver. Common causes of suspend/resume problems from the list you give below are acpi modules, bluetooth and usb. I'd also be consider pcmcia, drm and fuse possibilities. But again, go for unloading everything possible in the first instance.
Actually, the reason I sent this is that when I showed the oops/gpf to Matthew Garrett at linux.conf.au, he said it looked like a CPU hotplug problem and suggested I send it to lkml. BTW, with 2.6.20-rc5, the suspend to RAM now works ~95% of the time.
Jean-Marc
Quoted 165 lines
Regards,
Nigel
Quoted 159 lines
Cheers,
Jean-Marc
P.S. This is the same laptop I had at LCA for which Linus told me to disable preemption and try the newest rc version.[10746.449071] Unable to handle kernel NULL pointer dereference at 0000000000000038 RIP: [10746.449080] [<ffffffff8022b9c8>] iput+0x18/0x80 [10746.449092] PGD 3a607067 PUD 27b20067 PMD 0 [10746.449099] Oops: 0000 [1] SMP [10746.449104] CPU 0 [10746.449107] Modules linked in: psmouse battery ac thermal fan buttonipw3945 ieee80211 tg3 arc4 ecb blkcipher
ieee80211_crypt_wepieee80211_cryptbinfmt_miscrfcomm l2cap bluetooth i915 drmspeedstep_centrinocpufreq_userspacecpufreq_powersavecpufreq_ondemandcpufreq_statsfreq_tablecpufreq_conservativevideo sbsi2c_ecdockasus_acpibacklight container ipv6 fuse sbp2af_packetparport_pclp parport sgsr_modcdromsnd_hda_intelsnd_hda_codectsdevsnd_pcm_osssnd_mixer_osspcmciasnd_pcmsnd_timerata_genericsnd shpchppci_hotplugsoundcoresnd_page_allocserio_rawyenta_socketrsrc_nonstaticpcmcia_corepcspkr evdev ext3 jbd mbcache ohci1394ehci_hcdieee1394ide_genericuhci_hcdusbcore genericsd_modprocessor[10746.449190] Pid: 218, comm: kswapd0 Not tainted 2.6.20-rc5-x86-64 #1 [10746.449196] RIP: 0010:[<ffffffff8022b9c8>] [<ffffffff8022b9c8>] iput+0x18/0x80 [10746.449206] RSP: 0000:ffff810037f2dd50 EFLAGS: 00010283 [10746.449212] RAX: 0000000000000000 RBX: ffff81000003fcf0 RCX: ffff81000003fd20 [10746.449219] RDX: 0000000000000001 RSI: 0000000000000286 RDI: ffff81000003fcf0 [10746.449225] RBP: 0000000000000042 R08: 0000000000000000 R09: 0000000000000000 [10746.449232] R10: 28f5c28f5c28f5c3 R11: ffffffff8023ae90 R12: 0000000000000000 [10746.449239] R13: ffff810075721c70 R14: ffffffff805fa940 R15: 0000000000000000 [10746.449246] FS: 0000000000000000(0000) GS:ffffffff8058e000(0000) knlGS:0000000000000000 [10746.449253] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b [10746.449259] CR2: 0000000000000038 CR3: 000000001207f000 CR4: 00000000000006e0 [10746.449265] Process kswapd0 (pid: 218, threadinfo ffff810037f2c000, task ffff810037a1b760) [10746.449269] Stack: ffff8100001ce2f0 ffffffff802ddaf8 ffff8100001ce3c0 ffff8100001ce2f0 [10746.449280] 0000000000000042 ffffffff8022f645 ffff810037f2dd80 000000000001cb60 [10746.449288] 0000000000000090 ffff81007daa0e00 00000000000000d0 ffffffff802ddb49 [10746.449296] Call Trace: [10746.449305] [<ffffffff802ddaf8>] prune_one_dentry+0x68/0xa0 [10746.449314] [<ffffffff8022f645>] prune_dcache+0x145/0x1e0 [10746.449323] [<ffffffff802ddb49>] shrink_dcache_memory+0x19/0x50 [10746.449331] [<ffffffff802418a7>] shrink_slab+0x117/0x190 [10746.449342] [<ffffffff8025a392>] kswapd+0x382/0x4e0 [10746.449356] [<ffffffff802a13b0>] autoremove_wake_function+0x0/0x30 [10746.449370] [<ffffffff8025a010>] kswapd+0x0/0x4e0 [10746.449376] [<ffffffff802a11d0>] keventd_create_kthread+0x0/0x90 [10746.449383] [<ffffffff802335a9>] kthread+0xd9/0x120 [10746.449394] [<ffffffff80260ec8>] child_rip+0xa/0x12 [10746.449401] [<ffffffff802a11d0>] keventd_create_kthread+0x0/0x90 [10746.449414] [<ffffffff802334d0>] kthread+0x0/0x120 [10746.449421] [<ffffffff80260ebe>] child_rip+0x0/0x12 [10746.449426] [10746.449429] [10746.449430] Code: 48 8b 40 38 75 04 0f 0b eb fe 48 85 c0 74 0b 48 8b 40 28 48 [10746.449449] RIP [<ffffffff8022b9c8>] iput+0x18/0x80 [10746.449456] RSP <ffff810037f2dd50> [10746.449460] CR2: 0000000000000038 [10746.449463] ACPI Exception (pci_bind-0299): AE_NOT_FOUND, Unable toget data from device DCKS [20060707]
and later:
[ 3.668009] SMP alternatives: switching to SMP code [ 3.668168] Booting processor 1/2 APIC 0x1 [ 4.149691] Initializing CPU#1 [ 4.229595] Calibrating delay using timer specific routine.. 3990.32 BogoMIPS (lpj=7980654) [ 4.229602] CPU: L1 I cache: 32K, L1 D cache: 32K [ 4.229604] CPU: L2 cache: 4096K [ 4.229606] CPU 1/1 -> Node 0 [ 4.229608] CPU: Physical Processor ID: 0 [ 4.229609] CPU: Processor Core ID: 1 [ 4.230107] Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06 [ 4.233607] CPU 1: Syncing TSC to CPU 0. [ 3.762970] CPU 1: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 960 cycles) [ 3.764689] general protection fault: 0000 [2] SMP [ 3.764963] CPU 1 [ 3.764983] Modules linked in: psmouse battery ac thermal fan buttonarc4 ecb blkcipher
ieee80211_crypt_wepieee80211_cryptbinfmt_miscrfcomm l2cap bluetooth i915 drmspeedstep_centrinocpufreq_userspacecpufreq_powersavecpufreq_ondemandcpufreq_statsfreq_tablecpufreq_conservativevideo sbsi2c_ecdockasus_acpibacklight container ipv6 fuse sbp2af_packetparport_pclp parport sgsr_modcdromsnd_hda_intelsnd_hda_codectsdevsnd_pcm_osssnd_mixer_osspcmciasnd_pcmsnd_timerata_genericsnd shpchppci_hotplugsoundcoresnd_page_allocserio_rawyenta_socketrsrc_nonstaticpcmcia_corepcspkr evdev ext3 jbd mbcache ohci1394ehci_hcdieee1394ide_genericuhci_hcdusbcore genericsd_modprocessor[ 3.765304] Pid: 7824, comm: sleep.sh Not tainted 2.6.20-rc5-x86-64 #1 [ 3.765330] RIP: 0010:[<ffffffff80289c45>] [<ffffffff80289c45>] task_rq_lock+0x35/0x90 [ 3.765379] RSP: 0018:ffff81001d291d28 EFLAGS: 00010086 [ 3.765403] RAX: 6e696c7761726320 RBX: ffffffff805f88a0 RCX: 0000000000000000 [ 3.765431] RDX: 0000000000000000 RSI: ffff81001d291db0 RDI: ffff810037a1b760 [ 3.765460] RBP: ffff81001d291d48 R08: 0000000000000000 R09: 0000000000000000 [ 3.765488] R10: 0000000000000001 R11: 0000000000000000 R12: ffffffff805f88a0 [ 3.765516] R13: ffff810037a1b760 R14: ffff81001d291db0 R15: ffff81000a9e3e80 [ 3.765546] FS: 00002b1bcd567ae0(0000) GS:ffff810037ad1cc0(0000) knlGS:0000000000000000 [ 3.765589] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 3.765615] CR2: 0000000000000000 CR3: 000000001d4d0000 CR4: 00000000000006a0 [ 3.765645] Process sleep.sh (pid: 7824, threadinfo ffff81001d290000, task ffff8100661cf080) [ 3.765689] Stack: ffff810037a1b760 0000000000000002 0000000000000003 0000000000000003 [ 3.765739] ffff81001d291dd8 ffffffff8028c454 0000000000000001 0000000000000003 [ 3.765786] 0000000000000000 0000000000000002 ffffffff8058e4c0 0000000000000003 [ 3.765822] Call Trace: [ 3.765861] [<ffffffff8028c454>] set_cpus_allowed+0x24/0xc0 [ 3.765890] [<ffffffff8033cf3b>] kobject_register+0x3b/0x50 [ 3.765919] [<ffffffff80292850>] cpu_callback+0x50/0x70 [ 3.765949] [<ffffffff80269406>] notifier_call_chain+0x26/0x40 [ 3.765980] [<ffffffff802a704c>] _cpu_up+0xbc/0xf0 [ 3.766005] [<ffffffff802a70b2>] cpu_up+0x32/0x60 [ 3.766030] [<ffffffff802a712b>] enable_nonboot_cpus+0x4b/0xa0 [ 3.766057] [<ffffffff802aba8b>] enter_state+0x15b/0x1b0 [ 3.766083] [<ffffffff802abb5b>] state_store+0x7b/0xb0 [ 3.766112] [<ffffffff80306c09>] sysfs_write_file+0xd9/0x120 [ 3.766143] [<ffffffff8021653e>] vfs_write+0xde/0x1a0 [ 3.766169] [<ffffffff80217073>] sys_write+0x53/0x90 [ 3.766197] [<ffffffff8026011e>] system_call+0x7e/0x83 [ 3.766228] [ 3.766247] [ 3.766248] Code: 8b 40 18 48 8b 04 c5 80 f2 59 80 48 03 58 08 48 89 df e8 54 [ 3.766331] RIP [<ffffffff80289c45>] task_rq_lock+0x35/0x90 [ 3.766359] RSP <ffff81001d291d28> [ 3.766650] <6>ata1.00: configured for UDMA/133-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Hi.
Quoted 19 lines · Jean-Marc Valin
Quoted 6 lines
Quoted 6 lines
I just encountered the following oops and general protection fault trying to suspend/resume my laptop. I've got a Dell D820 laptop with a 2 GHz Core 2 Duo CPU. It usually suspends/resumes fine but not always. The relevant errors are below but the full dmesg log is at
http://people.xiph.org/~jm/suspend_resume_oops.txt and my config is in
http://people.xiph.org/~jm/config-2.6.20-rc5.txt...
Quoted 11 lines
It looks like something is stomping on memory it shouldn't be touching, so I would suggest testing multiple cycles with a minimal (preferably zero) number of modules loaded. If that looks good and reliable, add modules & processes until you can say 'If I do X, it breaks.'. If having a minimal number of modules loaded doesn't help, I would then suggest reviewing your kernel config to see if other things can be built as modules and the same logic applied. You can be reasonably sure that it will be a device driver. Common causes of suspend/resume problems from the list you give below are acpi modules, bluetooth and usb. I'd also be consider pcmcia, drm and fuse possibilities. But again, go for unloading everything possible in the first instance.
Quoted 4 lines
Actually, the reason I sent this is that when I showed the oops/gpf to Matthew Garrett at linux.conf.au, he said it looked like a CPU hotplug problem and suggested I send it to lkml. BTW, with 2.6.20-rc5, the suspend to RAM now works ~95% of the time.
I agree that the second is cpu hotplug, but the first is something else, hence my recommendations above.
Regards,
Nigel
Hi!
Quoted 9 lines
Quoted 4 lines
will be a device driver. Common causes of suspend/resume problems from the list you give below are acpi modules, bluetooth and usb. I'd also be consider pcmcia, drm and fuse possibilities. But again, go for unloading everything possible in the first instance.
Actually, the reason I sent this is that when I showed the oops/gpf to Matthew Garrett at linux.conf.au, he said it looked like a CPU hotplug problem and suggested I send it to lkml. BTW, with 2.6.20-rc5, the suspend to RAM now works ~95% of the time.
Try a kernel without CONFIG_SMP... that will verify if it is SMP related.
Pavel
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Quoted 11 lines
Quoted 8 lines
Quoted 4 lines
will be a device driver. Common causes of suspend/resume problems from the list you give below are acpi modules, bluetooth and usb. I'd also be consider pcmcia, drm and fuse possibilities. But again, go for unloading everything possible in the first instance.
Actually, the reason I sent this is that when I showed the oops/gpf to Matthew Garrett at linux.conf.au, he said it looked like a CPU hotplug problem and suggested I send it to lkml. BTW, with 2.6.20-rc5, the suspend to RAM now works ~95% of the time.
Try a kernel without
CONFIG_SMP... that will verify if it is SMP related.
Well, this happens to be my main work machine, which I'm not willing to have running at half speed for several weeks. Anything else you can suggest?
Jean-Marc
what about removing psmouse module?
Quoted 22 lines · Jean-Marc Valin
Quoted 11 lines
Quoted 8 lines
Quoted 4 lines
will be a device driver. Common causes of suspend/resume problems from the list you give below are acpi modules, bluetooth and usb. I'd also be consider pcmcia, drm and fuse possibilities. But again, go for unloading everything possible in the first instance.
Actually, the reason I sent this is that when I showed the oops/gpf to Matthew Garrett at linux.conf.au, he said it looked like a CPU hotplug problem and suggested I send it to lkml. BTW, with 2.6.20-rc5, the suspend to RAM now works ~95% of the time.
Try a kernel without
CONFIG_SMP... that will verify if it is SMP related.Well, this happens to be my main work machine, which I'm not willing to have running at half speed for several weeks. Anything else you can suggest?
Jean-Marc
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Quoted 1 line · Luming Yu
what about removing psmouse module?
Trying that now. Any particular reason you suspect that one?
Jean-Marc
Quoted 29 lines · Jean-Marc Valin
Quoted 27 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
will be a device driver. Common causes of suspend/resume problems
from
Quoted 1 line
Quoted 1 line
Quoted 1 line
the list you give below are acpi modules, bluetooth and usb. I'd
also be
Quoted 1 line
Quoted 1 line
Quoted 1 line
consider pcmcia, drm and fuse possibilities. But again, go for
unloading
Quoted 8 lines
Quoted 5 lines
Quoted 1 line
everything possible in the first instance.
Actually, the reason I sent this is that when I showed the oops/gpf to Matthew Garrett at linux.conf.au, he said it looked like a CPU hotplug problem and suggested I send it to lkml. BTW, with 2.6.20-rc5, the suspend to RAM now works ~95% of the time.
Try a kernel without
CONFIG_SMP... that will verify if it is SMP related.Well, this happens to be my main work machine, which I'm not willing to have running at half speed for several weeks. Anything else you can suggest?
Jean-Marc
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Quoted 5 lines · Jean-Marc Valin
Quoted 1 line · Luming Yu
what about removing psmouse module?
Trying that now. Any particular reason you suspect that one?
I suspect it is due to broken modules. If not psmouse, please trying a boot with minimal modules loaded, and re-test .
Thanks,
Luming
Hi,
Sorry I haven't replied recently about that bug, but I have to admit I have no idea where to start. There actually seems to be much more fundamental problems with the kernel on my machines. I initially realised that even without using suspend to RAM, I was still getting crashes when docking. So I stopped docking and realised my machine would sometimes just crash when I plug/unplug the AC adaptor. Just to give an idea, I've experienced about 10-15 crashes in the past two months -- I don't think I've even done a single clean shutdown during that period.
To make things worse, the behaviour is always different. Sometimes I get a panic with keyboard LEDs flashing. Sometimes I get nothing at all and the machine is just frozen (doesn't respond to pings or to Alt-SysRq commands). Sometimes, I just lose my keyboard and/or mouse but the machine stays up. I'm running a vanilla 2.6.20 kernel (not tainted) with the following configuration: http://jmspeex.livejournal.com/1090.html
Jean-Marc
Hi,
Quoted 9 lines · Jean-Marc Valin
Hi,
I just encountered the following oops and general protection fault trying to suspend/resume my laptop. I've got a Dell D820 laptop with a 2 GHz Core 2 Duo CPU. It usually suspends/resumes fine but not always. The relevant errors are below but the full dmesg log is at
http://people.xiph.org/~jm/suspend_resume_oops.txt and my config is in
http://people.xiph.org/~jm/config-2.6.20-rc5.txt
Quoted 3 lines
This happens when I'm running 2.6.20-rc5. The previous kernel version I was using is 2.6.19-rc6 and was much more broken (second attempt *always* failed), so it's probably not a regression.
This is a shot against the odds, but could you please check if the attached patch has any effect?
Rafael
Signature · 3 lines
If you don't have the time to read, you don't have the time or the tools to write. - Stephen King
Both process_zones()and drain_node_pages() check for populated zones before touching pagesets. However, __drain_pages does not do so,
This may result in a NULL pointer dereference for pagesets in unpopulated zones if a NUMA setup is combined with cpu hotplug.
Initially the unpopulated zone has the pcp pointers pointing to the boot pagesets. Since the zone is not populated the boot pageset pointers will not be changed during page allocator and slab bootstrap.
If a cpu is later brought down (first call to __drain_pages()) then the pcp pointers for cpus in unpopulated zones are set to NULL since __drain_pages does not first check for an unpopulated zone.
If the cpu is then brought up again then we call process_zones() which will ignore the unpopulated zone. So the pageset pointers will still be NULL.
If the cpu is then again brought down then __drain_pages will attempt to drain pages by following the NULL pageset pointer for unpopulated zones.
--- mm/page_alloc.c | 3 +++ 1 file changed, 3 insertions(+)
mm/page_alloc.c +3 -0
@@ -714,6 +714,9 @@ static void __drain_pages(unsigned int cif (!populated_zone (zone))continue ; +if (!populated_zone (zone)) +continue ; + pset =zone_pcp (zone, cpu);for (i =0 ; i <ARRAY_SIZE (pset->pcp); i++) {struct per_cpu_pages *pcp;
Quoted 7 lines
Quoted 7 lines
I just encountered the following oops and general protection fault trying to suspend/resume my laptop. I've got a Dell D820 laptop with a 2 GHz Core 2 Duo CPU. It usually suspends/resumes fine but not always. The relevant errors are below but the full dmesg log is at
http://people.xiph.org/~jm/suspend_resume_oops.txt and my config is in
http://people.xiph.org/~jm/config-2.6.20-rc5.txt
Quoted 6 lines
Quoted 3 lines
This happens when I'm running 2.6.20-rc5. The previous kernel version I was using is 2.6.19-rc6 and was much more broken (second attempt *always* failed), so it's probably not a regression.
This is a shot against the odds, but could you please check if the attached patch has any effect?
Thanks, I'll try that. It may take a while because the problem only happened once in dozens of suspend/resume cycles.
Jean-Marc
Quoted 47 lines
Rafael
------------------------------------------------------------------------
Both process_zones()and
drain_node_pages()check for populated zones before touching pagesets. However,__drain_pagesdoes not do so,This may result in a NULL pointer dereference for pagesets in unpopulated zones if a NUMA setup is combined with cpu hotplug.
Initially the unpopulated zone has the pcp pointers pointing to the boot pagesets. Since the zone is not populated the boot pageset pointers will not be changed during page allocator and slab bootstrap.
If a cpu is later brought down (first call to
__drain_pages()) then the pcp pointers for cpus in unpopulated zones are set to NULL since__drain_pagesdoes not first check for an unpopulated zone.If the cpu is then brought up again then we call
process_zones()which will ignore the unpopulated zone. So the pageset pointers will still be NULL.If the cpu is then again brought down then
__drain_pageswill attempt to drain pages by following the NULL pageset pointer for unpopulated zones.Signed-off-by Christoph Lameter <[email protected]>--- mm/page_alloc.c | 3 +++ 1 file changed, 3 insertions(+)Index:
linux-2.6.20-rc4/mm/page_alloc.c
===================================================================mm/page_alloc.c +3
-0@@ -714,6 +714,9 @@ static void __drain_pages(unsigned int cif (!populated_zone (zone))continue ; +if (!populated_zone (zone)) +continue ; + pset =zone_pcp (zone, cpu);for (i =0 ; i <ARRAY_SIZE (pset->pcp); i++) {struct per_cpu_pages *pcp;