mpc8xx powerpc series
cover mpc8xx powerpc series
Paul,
This is nearly unchanged series from the submit that took place at the end of thei last merge window, when it was too late to pick it up. It did not acquire negative feedback though, and I hope will not this time.
Though there are not strict dependancy on CPM-related fixes, it would be better applied after them.
This is for .21 obviously...
Signature · 1 line
Sincerely, Vitaly
PATCH 1/7 POWERPC cpm_uart: OF-related fix for CPM1
This makes cpm uart able to work using OF-passed parameters in case of CPM stuff (found on most mpc8xx reference and custom boards). The idea is to keep ppc stuff working yet making it able to be used for powerpc.
---
drivers/serial/cpm_uart/cpm_uart_cpm1.c | 15 ++++++++------- 1 files changed, 8 insertions(+), 7 deletions(-)
drivers/serial/cpm_uart/cpm_uart_cpm1.c +8 -7
@@ -40,6 +40,7 @@#include <asm/io.h> #include <asm/irq.h> +#include <asm/fs_pd.h> #include <linux/serial_core.h> #include <linux/kernel.h>
@@ -145,7 +146,7 @@ int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)/* was hostalloc but changed cause it blows away the */ /* large tlb mapping when pinning the kernel area */ mem_addr = (u8 *)cpm_dpram_addr (cpm_dpalloc (memsz,8 )); - dma_addr = (u32 )mem_addr; + dma_addr = (u32 )cpm_dpram_phys (mem_addr); }else mem_addr =dma_alloc_coherent (NULL , memsz, &dma_addr,GFP_KERNEL );
@@ -205,7 +206,7 @@ int __init cpm_uart_init_portdesc(void) (unsigned long )&cpmp->cp_smc[0 ]; cpm_uart_ports[UART_SMC1 ].smcp->smc_smcm |= (SMCM_RX |SMCM_TX ); cpm_uart_ports[UART_SMC1 ].smcp->smc_smcmr &= ~(SMCMR_REN |SMCMR_TEN ); - cpm_uart_ports[UART_SMC1 ].port.uartclk = (((bd_t *) __res)->bi_intfreq); + cpm_uart_ports[UART_SMC1 ].port.uartclk =uart_clock (); cpm_uart_port_map[cpm_uart_nr++] =UART_SMC1 ;#endif
@@ -217,7 +218,7 @@ int __init cpm_uart_init_portdesc(void) (unsigned long )&cpmp->cp_smc[1 ]; cpm_uart_ports[UART_SMC2 ].smcp->smc_smcm |= (SMCM_RX |SMCM_TX ); cpm_uart_ports[UART_SMC2 ].smcp->smc_smcmr &= ~(SMCMR_REN |SMCMR_TEN ); - cpm_uart_ports[UART_SMC2 ].port.uartclk = (((bd_t *) __res)->bi_intfreq); + cpm_uart_ports[UART_SMC2 ].port.uartclk =uart_clock (); cpm_uart_port_map[cpm_uart_nr++] =UART_SMC2 ;#endif
@@ -231,7 +232,7 @@ int __init cpm_uart_init_portdesc(void) ~(UART_SCCM_TX |UART_SCCM_RX ); cpm_uart_ports[UART_SCC1 ].sccp->scc_gsmrl &= ~(SCC_GSMRL_ENR |SCC_GSMRL_ENT ); - cpm_uart_ports[UART_SCC1 ].port.uartclk = (((bd_t *) __res)->bi_intfreq); + cpm_uart_ports[UART_SCC1 ].port.uartclk =uart_clock (); cpm_uart_port_map[cpm_uart_nr++] =UART_SCC1 ;#endif
@@ -245,7 +246,7 @@ int __init cpm_uart_init_portdesc(void) ~(UART_SCCM_TX |UART_SCCM_RX ); cpm_uart_ports[UART_SCC2 ].sccp->scc_gsmrl &= ~(SCC_GSMRL_ENR |SCC_GSMRL_ENT ); - cpm_uart_ports[UART_SCC2 ].port.uartclk = (((bd_t *) __res)->bi_intfreq); + cpm_uart_ports[UART_SCC2 ].port.uartclk =uart_clock (); cpm_uart_port_map[cpm_uart_nr++] =UART_SCC2 ;#endif
@@ -259,7 +260,7 @@ int __init cpm_uart_init_portdesc(void) ~(UART_SCCM_TX |UART_SCCM_RX ); cpm_uart_ports[UART_SCC3 ].sccp->scc_gsmrl &= ~(SCC_GSMRL_ENR |SCC_GSMRL_ENT ); - cpm_uart_ports[UART_SCC3 ].port.uartclk = (((bd_t *) __res)->bi_intfreq); + cpm_uart_ports[UART_SCC3 ].port.uartclk =uart_clock (); cpm_uart_port_map[cpm_uart_nr++] =UART_SCC3 ;#endif
@@ -273,7 +274,7 @@ int __init cpm_uart_init_portdesc(void) ~(UART_SCCM_TX |UART_SCCM_RX ); cpm_uart_ports[UART_SCC4 ].sccp->scc_gsmrl &= ~(SCC_GSMRL_ENR |SCC_GSMRL_ENT ); - cpm_uart_ports[UART_SCC4 ].port.uartclk = (((bd_t *) __res)->bi_intfreq); + cpm_uart_ports[UART_SCC4 ].port.uartclk =uart_clock (); cpm_uart_port_map[cpm_uart_nr++] =UART_SCC4 ;#endif return 0 ;
PATCH 2/7 POWERPC 8xx: platform specific mmu updates
In reply to Vitaly BordugThis is just a straight port of the same done in arch/ppc by Marcelo Tosatti. One used to be
[PATCH] ppc32 8xx: update_mmu_cache() needs unconditional tlbie, commit eb07d964b4491d1bb5864cd3d7e7633ccdda9a53
In a nutshell, the board is nearly stuck without this, yet without any visible failure - being just very slow.
---
arch/powerpc/mm/mem.c | 20 ++++++++++---------- 1 files changed, 10 insertions(+), 10 deletions(-)
arch/powerpc/mm/mem.c +10 -10
@@ -490,19 +490,19 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, !cpu_has_feature(CPU_FTR_NOEXECUTE) && pfn_valid(pfn)) {struct page *page =pfn_to_page (pfn); +#ifdef CONFIG_8xx +/* On 8xx, cache control instructions (particularly +* "dcbst" from flush_dcache_icache) fault as write +* operation if there is an unpopulated TLB entry +* for the address in question. To workaround that, +* we invalidate the TLB here, thus avoiding dcbst +* misbehaviour. +*/ +_tlbie (address); +#endif if (!PageReserved (page) && !test_bit (PG_arch_1, &page->flags)) {if (vma->vm_mm == current->active_mm) { -#ifdef CONFIG_8xx -/* On 8xx, cache control instructions (particularly -* "dcbst" from flush_dcache_icache) fault as write -* operation if there is an unpopulated TLB entry -* for the address in question. To workaround that, -* we invalidate the TLB here, thus avoiding dcbst -* misbehaviour. -*/ -_tlbie (address); -#endif __flush_dcache_icache ((void *) address); }else flush_dcache_icache_page (page);
PATCH 3/7 POWERPC 8xx: generic 8xx code arch/powerpc port
In reply to Vitaly BordugIncluding support for non-coherent cache, some mm-related things + relevant field in Kconfig and Makefiles. Also included rheap.o compilation if 8xx is defined.
Non-coherent mapping were refined and renamed according to Cristoph Hellwig. Orhaned functions were cleaned up.
---
arch/powerpc/Kconfig | 11 + arch/powerpc/lib/Makefile | 2 arch/powerpc/lib/dma-noncoherent.c | 418 ++++++++++++++++++++++++++++++++++++ 3 files changed, 429 insertions(+), 2 deletions(-)
arch/powerpc/Kconfig +9 -2
@@ -173,6 +173,11 @@ config PPC_86xx help The Freescale E600 SoCs have 74xx cores. +config PPC_8xx + bool "Freescale 8xx" + select FSL_SOC + select 8xx + config 40x bool "AMCC 40x" select PPC_DCR_NATIVE
@@ -181,8 +186,6 @@ config 44x bool "AMCC 44x" select PPC_DCR_NATIVE -config 8xx - bool "Freescale 8xx" config E200 bool "Freescale e200"
@@ -211,6 +214,10 @@ config 6xx bool # this is temp to handle compat with arch=ppc +config 8xx + bool + +# this is temp to handle compat with arch=ppc config 83xx bool
arch/powerpc/lib/Makefile +2 -0
@@ -16,6 +16,7 @@ obj-$(CONFIG_PPC64) += checksum_64.o copypage_64.o copyuser_64.o \ strcase.o obj-$(CONFIG_QUICC_ENGINE) += rheap.o obj-$(CONFIG_XMON) += sstep.o +obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-noncoherent.o ifeq ($(CONFIG_PPC64),y) obj-$(CONFIG_SMP) += locks.o
@@ -24,5 +25,6 @@ endif # Temporary hack until we have migrated to asm-powerpc ifeq ($(CONFIG_PPC_MERGE),y) +obj-$(CONFIG_8xx) += rheap.o obj-$(CONFIG_CPM2) += rheap.o endif
arch/powerpc/lib/dma-noncoherent.c new file +418 -0
418 lines not on this page · raw message
PATCH 4/7 POWERPC 8xx: platform related changes to the fsl_soc
In reply to Vitaly BordugAdded 8xx SoC peripherials: fec for Ethernet and smc for UARTs. Ordinary routines to extract values from the device tree and insert respective platform devices
---
arch/powerpc/sysdev/fsl_soc.c | 274 +++++++++++++++++++++++++++++++++++++++++ 1 files changed, 272 insertions(+), 2 deletions(-)
arch/powerpc/sysdev/fsl_soc.c +272 -2
@@ -38,7 +38,8 @@#include <asm/cpm2.h> extern void init_fcc_ioports (struct fs_platform_info *); -extern void init_scc_ioports (struct fs_uart_platform_info *); +extern void init_fec_ioports (struct fs_platform_info *); +extern void init_smc_ioports (struct fs_uart_platform_info *);static phys_addr_t immrbase =-1 ;phys_addr_t get_immrbase (void )
@@ -63,7 +64,7 @@ phys_addr_t get_immrbase(void)EXPORT_SYMBOL (get_immrbase); -#ifdef CONFIG_CPM2 +#if defined(CONFIG_CPM2 ) || defined(CONFIG_8xx)static u32 brgfreq =-1 ;
@@ -544,6 +545,8 @@ arch_initcall(fsl_usb_of_init);#ifdef CONFIG_CPM2 +extern void init_scc_ioports (struct fs_uart_platform_info *); +static const char fcc_regs[] ="fcc_regs" ;static const char fcc_regs_c[] ="fcc_regs_c" ;static const char fcc_pram[] ="fcc_pram" ;
@@ -792,3 +795,270 @@ err:arch_initcall (cpm_uart_of_init);#endif /* CONFIG_CPM2 */ + +#ifdef CONFIG_8xx + +extern void init_scc_ioports (struct fs_platform_info *); +extern int platform_device_skip (char *model,int id); + +static int __init fs_enet_mdio_of_init (void ) +{ +struct device_node *np; +unsigned int i; +struct platform_device *mdio_dev; +struct resource res; +int ret; + +for (np =NULL , i =0 ; + (np =of_find_compatible_node (np,"mdio" ,"fs_enet" )) !=NULL ; + i++) { +struct fs_mii_fec_platform_info mdio_data; + +memset (&res,0 ,sizeof (res)); +memset (&mdio_data,0 ,sizeof (mdio_data)); + + ret =of_address_to_resource (np,0 , &res); +if (ret) + goto err; + + mdio_dev = +platform_device_register_simple ("fsl-cpm-fec-mdio" , + res.start, &res,1 ); +if (IS_ERR (mdio_dev)) { + ret =PTR_ERR (mdio_dev); + goto err; + } + + mdio_data.mii_speed = ((((ppc_proc_freq +4999999 ) /2500000 ) /2 ) &0x3F ) <<1 ; + + ret = +platform_device_add_data (mdio_dev, &mdio_data, +sizeof (struct fs_mii_fec_platform_info )); +if (ret) + goto unreg; + } +return 0 ; + +unreg: +platform_device_unregister (mdio_dev); +err: +return ret; +} + +arch_initcall (fs_enet_mdio_of_init); + +static const char *enet_regs ="regs" ; +static const char *enet_pram ="pram" ; +static const char *enet_irq ="interrupt" ; +static char bus_id[9 ][BUS_ID_SIZE ]; + +static int __init fs_enet_of_init (void ) +{ +struct device_node *np; +unsigned int i; +struct platform_device *fs_enet_dev =NULL ; +struct resource res; +int ret; + +for (np =NULL , i =0 ; + (np =of_find_compatible_node (np,"network" ,"fs_enet" )) !=NULL ; + i++) { +struct resource r[4 ]; +struct device_node *phy =NULL , *mdio =NULL ; +struct fs_platform_info fs_enet_data; +unsigned int *id, *phy_addr; +void *mac_addr; +phandle *ph; +char *model; + +memset (r,0 ,sizeof (r)); +memset (&fs_enet_data,0 ,sizeof (fs_enet_data)); + + model = (char *)get_property (np,"model" ,NULL ); +if (model ==NULL ) { + ret = -ENODEV ; + goto unreg; + } + + id = (u32 *)get_property (np,"device-id" ,NULL ); + fs_enet_data.fs_no = *id; + +if (platform_device_skip (model, *id)) +continue ; + + ret =of_address_to_resource (np,0 , &r[0 ]); +if (ret) + goto err; + r[0 ].name = enet_regs; + + mac_addr = (void *)get_property (np,"mac-address" ,NULL ); +memcpy (fs_enet_data.macaddr, mac_addr,6 ); + + ph = (phandle *)get_property (np,"phy-handle" ,NULL ); +if (ph !=NULL ) + phy =of_find_node_by_phandle (*ph); + +if (phy !=NULL ) { + phy_addr = (u32 *)get_property (phy,"reg" ,NULL ); + fs_enet_data.phy_addr = *phy_addr; + fs_enet_data.has_phy =1 ; + + mdio =of_get_parent (phy); + ret =of_address_to_resource (mdio,0 , &res); +if (ret) { +of_node_put (phy); +of_node_put (mdio); + goto unreg; + } + } + + model = (char *)get_property (np,"model" ,NULL ); +strcpy (fs_enet_data.fs_type, model); + +if (strstr (model,"FEC" )) { + r[1 ].start = r[1 ].end =irq_of_parse_and_map (np,0 ); + r[1 ].flags =IORESOURCE_IRQ ; + r[1 ].name = enet_irq; + + fs_enet_dev = +platform_device_register_simple ("fsl-cpm-fec" , i, &r[0 ],2 ); + +if (IS_ERR (fs_enet_dev)) { + ret =PTR_ERR (fs_enet_dev); + goto err; + } + + fs_enet_data.rx_ring =128 ; + fs_enet_data.tx_ring =16 ; + fs_enet_data.rx_copybreak =240 ; + fs_enet_data.use_napi =1 ; + fs_enet_data.napi_weight =17 ; + +snprintf ((char *)&bus_id[i],BUS_ID_SIZE ,"%x:%02x" , + (u32 )res.start, fs_enet_data.phy_addr); + fs_enet_data.bus_id = (char *)&bus_id[i]; + fs_enet_data.init_ioports = init_fec_ioports; + } +if (strstr (model,"SCC" )) { + ret =of_address_to_resource (np,1 , &r[1 ]); +if (ret) + goto err; + r[1 ].name = enet_pram; + + r[2 ].start = r[2 ].end =irq_of_parse_and_map (np,0 ); + r[2 ].flags =IORESOURCE_IRQ ; + r[2 ].name = enet_irq; + + fs_enet_dev = +platform_device_register_simple ("fsl-cpm-scc" , i, &r[0 ],3 ); + +if (IS_ERR (fs_enet_dev)) { + ret =PTR_ERR (fs_enet_dev); + goto err; + } + + fs_enet_data.rx_ring =64 ; + fs_enet_data.tx_ring =8 ; + fs_enet_data.rx_copybreak =240 ; + fs_enet_data.use_napi =1 ; + fs_enet_data.napi_weight =17 ; + +snprintf ((char *)&bus_id[i],BUS_ID_SIZE ,"%s" ,"fixed@10:1" ); + fs_enet_data.bus_id = (char *)&bus_id[i]; + fs_enet_data.init_ioports = init_scc_ioports; + } + +of_node_put (phy); +of_node_put (mdio); + + ret =platform_device_add_data (fs_enet_dev, &fs_enet_data, +sizeof (struct +fs_platform_info )); +if (ret) + goto unreg; + } +return 0 ; + +unreg: +platform_device_unregister (fs_enet_dev); +err: +return ret; +} + +arch_initcall (fs_enet_of_init); + + +static const char *smc_regs ="regs" ; +static const char *smc_pram ="pram" ; + +static int __init cpm_smc_uart_of_init (void ) +{ +struct device_node *np; +unsigned int i; +struct platform_device *cpm_uart_dev; +int ret; + +for (np =NULL , i =0 ; + (np =of_find_compatible_node (np,"serial" ,"cpm_uart" )) !=NULL ; + i++) { +struct resource r[3 ]; +struct fs_uart_platform_info cpm_uart_data; +int *id; +char *model; + +memset (r,0 ,sizeof (r)); +memset (&cpm_uart_data,0 ,sizeof (cpm_uart_data)); + + ret =of_address_to_resource (np,0 , &r[0 ]); +if (ret) + goto err; + + r[0 ].name = smc_regs; + + ret =of_address_to_resource (np,1 , &r[1 ]); +if (ret) + goto err; + r[1 ].name = smc_pram; + + r[2 ].start = r[2 ].end =irq_of_parse_and_map (np,0 ); + r[2 ].flags =IORESOURCE_IRQ ; + + cpm_uart_dev = +platform_device_register_simple ("fsl-cpm-smc:uart" , i, &r[0 ],3 ); + +if (IS_ERR (cpm_uart_dev)) { + ret =PTR_ERR (cpm_uart_dev); + goto err; + } + + model = (char *)get_property (np,"model" ,NULL ); +strcpy (cpm_uart_data.fs_type, model); + + id = (int *)get_property (np,"device-id" ,NULL ); + cpm_uart_data.fs_no = *id; + cpm_uart_data.uart_clk = ppc_proc_freq; + + cpm_uart_data.tx_num_fifo =4 ; + cpm_uart_data.tx_buf_size =32 ; + cpm_uart_data.rx_num_fifo =4 ; + cpm_uart_data.rx_buf_size =32 ; + + ret = +platform_device_add_data (cpm_uart_dev, &cpm_uart_data, +sizeof (struct +fs_uart_platform_info )); +if (ret) + goto unreg; + } + +return 0 ; + +unreg: +platform_device_unregister (cpm_uart_dev); +err: +return ret; +} + +arch_initcall (cpm_smc_uart_of_init); + +#endif /* CONFIG_8xx */
PATCH 5/7 POWERPC 8xx: powerpc port of core CPM PIC
In reply to Vitaly BordugThis covers common CPM access functions, CPM interrupt controller code, micropatch and a few compatibility things to kee the same driver base working with arch/ppc. This version is refined with all the comments (mostly PIC-related) addressed.
---
arch/powerpc/sysdev/Makefile | 2 arch/powerpc/sysdev/commproc.c | 398 ++++++++++++++++++++ arch/powerpc/sysdev/micropatch.c | 743 ++++++++++++++++++++++++++++++++++++++ arch/powerpc/sysdev/mpc8xx_pic.c | 197 ++++++++++ arch/powerpc/sysdev/mpc8xx_pic.h | 12 + include/asm-powerpc/fs_pd.h | 45 ++ include/asm-powerpc/mpc8xx.h | 24 + include/asm-powerpc/time.h | 2 include/asm-ppc/commproc.h | 1 9 files changed, 1414 insertions(+), 10 deletions(-)
arch/powerpc/sysdev/Makefile +2 -0
@@ -22,4 +22,6 @@ endif ifeq ($(ARCH),powerpc) obj-$(CONFIG_MTD) += rom.o obj-$(CONFIG_CPM2) += cpm2_common.o cpm2_pic.o +obj-$(CONFIG_8xx) += mpc8xx_pic.o commproc.o +obj-$(CONFIG_UCODE_PATCH) += micropatch.o endif
arch/powerpc/sysdev/commproc.c new file +398 -0
398 lines not on this page · raw message
arch/powerpc/sysdev/micropatch.c new file +743 -0
743 lines not on this page · raw message
arch/powerpc/sysdev/mpc8xx_pic.c new file +197 -0
197 lines not on this page · raw message
arch/powerpc/sysdev/mpc8xx_pic.h new file +12 -0
@@ -0,0 +1,12 @@ +#ifndef _PPC_KERNEL_MPC8xx_H +#define _PPC_KERNEL_MPC8xx_H + +#include <linux/irq.h> +#include <linux/interrupt.h> + +extern struct hw_interrupt_type mpc8xx_pic; + +int mpc8xx_pic_init (void ); +unsigned int mpc8xx_get_irq (void ); + +#endif /* _PPC_KERNEL_PPC8xx_H */
include/asm-powerpc/fs_pd.h +35 -10
59 lines not on this page · raw message
include/asm-powerpc/mpc8xx.h new file +24 -0
@@ -0,0 +1,24 @@ +/* This is the single file included by all MPC8xx build options. +* Since there are many different boards and no standard configuration, +* we have a unique include file for each. Rather than change every +* file that has to include MPC8xx configuration, they all include +* this one and the configuration switching is done here. +*/ +#ifdef __KERNEL__ +#ifndef __CONFIG_8xx_DEFS +#define __CONFIG_8xx_DEFS + + +#ifdef CONFIG_8xx + +#ifdef CONFIG_FADS +#include <platforms/fads.h> +#endif + +#if defined(CONFIG_MPC885ADS ) +#include <platforms/8xx/mpc885ads.h> +#endif + +#endif /* CONFIG_8xx */ +#endif /* __CONFIG_8xx_DEFS */ +#endif /* __KERNEL__ */
include/asm-powerpc/time.h +2 -0
@@ -39,6 +39,8 @@ extern void generic_calibrate_decr(void);extern void wakeup_decrementer (void );extern void snapshot_timebase (void ); +extern void set_dec_cpu6 (unsigned int val); +/* Some sane defaults: 125 MHz timebase, 1GHz processor */ extern unsigned long ppc_proc_freq;#define DEFAULT_PROC_FREQ (DEFAULT_TB_FREQ * 8)
include/asm-ppc/commproc.h +1 -0
@@ -77,6 +77,7 @@ extern int cpm_dpfree(uint offset);extern uint cpm_dpalloc_fixed (uint offset,uint size,uint align);extern void cpm_dpdump (void );extern void *cpm_dpram_addr (uint offset); +extern uint cpm_dpram_phys (u8 * addr);extern void cpm_setbrg (uint brg,uint rate);extern uint m8xx_cpm_hostalloc (uint size);
PATCH 6/7 POWERPC 8xx: Add mpc885ads support and common mpc8xx files
In reply to Vitaly BordugThis adds the core 8xx stuff and specifically mpc885ads board-specific bits to arch/powerpc. Respective Kconfig has been cleaned up from the stuff not yet ported over to avoid confusion. Updated and cleaned version.
---
arch/powerpc/boot/dts/mpc885ads.dts | 185 ++++++ arch/powerpc/configs/mpc885_ads_defconfig | 827 ++++++++++++++++++++++++++ arch/powerpc/platforms/8xx/Kconfig | 300 +-------- arch/powerpc/platforms/8xx/Makefile | 5 arch/powerpc/platforms/8xx/m8xx_setup.c | 303 ++++++++++ arch/powerpc/platforms/8xx/mpc885ads.h | 95 +++ arch/powerpc/platforms/8xx/mpc885ads_setup.c | 387 ++++++++++++ arch/powerpc/platforms/Makefile | 1 8 files changed, 1846 insertions(+), 257 deletions(-)
arch/powerpc/boot/dts/mpc885ads.dts new file +185 -0
@@ -0,0 +1,185 @@ +/* + * MPC885 ADS Device Tree Source + * + * Copyright 2006 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + + +/ { + model = "MPC885ADS"; + compatible = "mpc8xx"; + #address-cells = <1>; + #size-cells = <1>; + linux,phandle = <100>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + linux,phandle = <200>; + + PowerPC,885@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <2000>; // L1, 8K + i-cache-size = <2000>; // L1, 8K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + 32-bit; + interrupts = <f 2>; // decrementer interrupt + interrupt-parent = <ff000000>; + linux,phandle = <201>; + linux,boot-cpu; + }; + }; + + memory { + device_type = "memory"; + linux,phandle = <300>; + reg = <00000000 800000>; + }; + + soc885@ff000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 ff000000 00100000>; + reg = <ff000000 00000200>; + bus-frequency = <0>; + mdio@e80 { + device_type = "mdio"; + compatible = "fs_enet"; + reg = <e80 8>; + linux,phandle = <e80>; + #address-cells = <1>; + #size-cells = <0>; + ethernet-phy@0 { + linux,phandle = <e8000>; + reg = <0>; + device_type = "ethernet-phy"; + }; + ethernet-phy@1 { + linux,phandle = <e8001>; + reg = <1>; + device_type = "ethernet-phy"; + }; + ethernet-phy@2 { + linux,phandle = <e8002>; + reg = <2>; + device_type = "ethernet-phy"; + }; + }; + + fec@e00 { + device_type = "network"; + compatible = "fs_enet"; + model = "FEC"; + device-id = <1>; + reg = <e00 188>; + mac-address = [ 00 00 0C 00 01 FD ]; + interrupts = <3 1>; + interrupt-parent = <ff000000>; + phy-handle = <e8000>; + }; + + fec@1e00 { + device_type = "network"; + compatible = "fs_enet"; + model = "FEC"; + device-id = <2>; + reg = <1e00 188>; + mac-address = [ 00 00 0C 00 02 FD ]; + interrupts = <7 1>; + interrupt-parent = <ff000000>; + phy-handle = <e8001>; + }; + + pic@ff000000 { + linux,phandle = <ff000000>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0 24>; + built-in; + device_type = "mpc8xx-pic"; + compatible = "CPM"; + }; + + cpm@ff000000 { + linux,phandle = <ff000000>; + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "cpm"; + model = "CPM"; + ranges = <0 0 4000>; + reg = <860 f0>; + command-proc = <9c0>; + brg-frequency = <0>; + interrupts = <0 2>; // cpm error interrupt + interrupt-parent = <930>; + + pic@930 { + linux,phandle = <930>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + interrupts = <5 2 0 2>; + interrupt-parent = <ff000000>; + reg = <930 20>; + built-in; + device_type = "cpm-pic"; + compatible = "CPM"; + }; + + smc@a80 { + device_type = "serial"; + compatible = "cpm_uart"; + model = "SMC"; + device-id = <1>; + reg = <a80 10 3e80 40>; + clock-setup = <00ffffff 0>; + rx-clock = <1>; + tx-clock = <1>; + current-speed = <0>; + interrupts = <4 3>; + interrupt-parent = <930>; + }; + + smc@a90 { + device_type = "serial"; + compatible = "cpm_uart"; + model = "SMC"; + device-id = <2>; + reg = <a90 20 3f80 40>; + clock-setup = <ff00ffff 90000>; + rx-clock = <2>; + tx-clock = <2>; + current-speed = <0>; + interrupts = <3 3>; + interrupt-parent = <930>; + }; + + scc@a40 { + device_type = "network"; + compatible = "fs_enet"; + model = "SCC"; + device-id = <3>; + reg = <a40 18 3e00 80>; + mac-address = [ 00 00 0C 00 03 FD ]; + interrupts = <1c 3>; + interrupt-parent = <930>; + phy-handle = <e8002>; + }; + }; + }; +};
arch/powerpc/configs/mpc885_ads_defconfig new file +827 -0
827 lines not on this page · raw message
arch/powerpc/platforms/8xx/Kconfig +43 -257
337 lines not on this page · raw message
arch/powerpc/platforms/8xx/Makefile new file +5 -0
@@ -0,0 +1,5 @@ +# +# Makefile for the PowerPC 8xx linux kernel. +# +obj-$(CONFIG_PPC_8xx) += m8xx_setup.o +obj-$(CONFIG_MPC885ADS) += mpc885ads_setup.o
arch/powerpc/platforms/8xx/m8xx_setup.c new file +303 -0
303 lines not on this page · raw message
arch/powerpc/platforms/8xx/mpc885ads.h new file +95 -0
95 lines not on this page · raw message
arch/powerpc/platforms/8xx/mpc885ads_setup.c new file +387 -0
387 lines not on this page · raw message
arch/powerpc/platforms/Makefile +1 -0
@@ -8,6 +8,7 @@ endif obj-$(CONFIG_PPC_MPC52xx) += 52xx/ obj-$(CONFIG_PPC_CHRP) += chrp/ obj-$(CONFIG_4xx) += 4xx/ +obj-$(CONFIG_PPC_8xx) += 8xx/ obj-$(CONFIG_PPC_82xx) += 82xx/ obj-$(CONFIG_PPC_83xx) += 83xx/ obj-$(CONFIG_PPC_85xx) += 85xx/
PATCH 7/7 POWERPC: Adds mpc866ads board specific bits to arch/powerpc
In reply to Vitaly BordugThis add support of the Freescale mpc86xads reference board to arch/powerpc. Supported SMC1 and SMC2 (UART and serial console), FEC 100Mbps Ethernet, SCC1 Ethernet (10Mbps hdx)
---
arch/powerpc/boot/dts/mpc866ads.dts | 162 +++++ arch/powerpc/configs/mpc866_ads_defconfig | 829 ++++++++++++++++++++++++++ arch/powerpc/platforms/8xx/Makefile | 1 arch/powerpc/platforms/8xx/mpc86xads.h | 95 +++ arch/powerpc/platforms/8xx/mpc86xads_setup.c | 301 +++++++++ include/asm-powerpc/mpc8xx.h | 4 6 files changed, 1392 insertions(+), 0 deletions(-)
arch/powerpc/boot/dts/mpc866ads.dts new file +162 -0
@@ -0,0 +1,162 @@ +/* + * MPC866 ADS Device Tree Source + * + * Copyright 2006 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + + +/ { + model = "MPC866ADS"; + compatible = "mpc8xx"; + #address-cells = <1>; + #size-cells = <1>; + linux,phandle = <100>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + linux,phandle = <200>; + + PowerPC,866@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <2000>; // L1, 8K + i-cache-size = <4000>; // L1, 16K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + 32-bit; + interrupts = <f 2>; // decrementer interrupt + interrupt-parent = <ff000000>; + linux,phandle = <201>; + linux,boot-cpu; + }; + }; + + memory { + device_type = "memory"; + linux,phandle = <300>; + reg = <00000000 800000>; + }; + + soc866@ff000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 ff000000 00100000>; + reg = <ff000000 00000200>; + bus-frequency = <0>; + mdio@e80 { + device_type = "mdio"; + compatible = "fs_enet"; + reg = <e80 8>; + linux,phandle = <e80>; + #address-cells = <1>; + #size-cells = <0>; + ethernet-phy@f { + linux,phandle = <e800f>; + reg = <f>; + device_type = "ethernet-phy"; + }; + }; + + fec@e00 { + device_type = "network"; + compatible = "fs_enet"; + model = "FEC"; + device-id = <1>; + reg = <e00 188>; + mac-address = [ 00 00 0C 00 01 FD ]; + interrupts = <3 1>; + interrupt-parent = <ff000000>; + phy-handle = <e800f>; + }; + + pic@ff000000 { + linux,phandle = <ff000000>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0 24>; + built-in; + device_type = "mpc8xx-pic"; + compatible = "CPM"; + }; + + cpm@ff000000 { + linux,phandle = <ff000000>; + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "cpm"; + model = "CPM"; + ranges = <0 0 4000>; + reg = <860 f0>; + command-proc = <9c0>; + brg-frequency = <0>; + interrupts = <0 2>; // cpm error interrupt + interrupt-parent = <930>; + + pic@930 { + linux,phandle = <930>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + interrupts = <5 2 0 2>; + interrupt-parent = <ff000000>; + reg = <930 20>; + built-in; + device_type = "cpm-pic"; + compatible = "CPM"; + }; + + smc@a80 { + device_type = "serial"; + compatible = "cpm_uart"; + model = "SMC"; + device-id = <1>; + reg = <a80 10 3e80 40>; + clock-setup = <00ffffff 0>; + rx-clock = <1>; + tx-clock = <1>; + current-speed = <0>; + interrupts = <4 3>; + interrupt-parent = <930>; + }; + + smc@a90 { + device_type = "serial"; + compatible = "cpm_uart"; + model = "SMC"; + device-id = <2>; + reg = <a90 20 3f80 40>; + clock-setup = <ff00ffff 90000>; + rx-clock = <2>; + tx-clock = <2>; + current-speed = <0>; + interrupts = <3 3>; + interrupt-parent = <930>; + }; + + scc@a00 { + device_type = "network"; + compatible = "fs_enet"; + model = "SCC"; + device-id = <1>; + reg = <a00 18 3c00 80>; + mac-address = [ 00 00 0C 00 03 FD ]; + interrupts = <1e 3>; + interrupt-parent = <930>; + }; + }; + }; +};
arch/powerpc/configs/mpc866_ads_defconfig new file +829 -0
829 lines not on this page · raw message
arch/powerpc/platforms/8xx/Makefile +1 -0
@@ -3,3 +3,4 @@ # obj-$(CONFIG_PPC_8xx) += m8xx_setup.o obj-$(CONFIG_MPC885ADS) += mpc885ads_setup.o +obj-$(CONFIG_MPC86XADS) += mpc86xads_setup.o
arch/powerpc/platforms/8xx/mpc86xads.h new file +95 -0
95 lines not on this page · raw message
arch/powerpc/platforms/8xx/mpc86xads_setup.c new file +301 -0
301 lines not on this page · raw message
include/asm-powerpc/mpc8xx.h +4 -0
@@ -15,6 +15,10 @@#include <platforms/fads.h> #endif +#if defined(CONFIG_MPC86XADS ) +#include <platforms/8xx/mpc86xads.h> +#endif +#if defined(CONFIG_MPC885ADS )#include <platforms/8xx/mpc885ads.h> #endif