Skip to contentSkip to conversation

drivers/media/video/bt8xx/: possible cleanups

RFC PATCH New Adrian Bunk 1 participant 1 message Jan 24, 2007 Media (V4L/DVB)

lore
Share & tools
lore
#0 lore raw

RFC PATCH 1/1 drivers/media/video/bt8xx/: possible cleanups

This patch contains the following possible cleanups:
- remove the following unused global functions:
- bttv-if.c: bttv_get_cardinfo()
- bttv-if.c: bttv_get_id()
- bttv-if.c: bttv_get_gpio_queue()
- bttv-if.c: bttv_i2c_call()
- remove the following unused EXPORT_SYMBOL's:
- bttv-gpio.c: bttv_sub_bus_type
- bttv-gpio.c: bttv_gpio_inout
- bttv-gpio.c: bttv_gpio_read
- bttv-gpio.c: bttv_gpio_write
- bttv-gpio.c: bttv_gpio_bits

---

 drivers/media/video/bt8xx/bttv-gpio.c |    5 --
 drivers/media/video/bt8xx/bttv-if.c   |   50 --------------------------
 drivers/media/video/bt8xx/bttv.h      |   24 ------------
 3 files changed, 79 deletions(-)
drivers/media/video/bt8xx/bttv-gpio.c renamed from drivers/media/video/bt8xx/bttv-gpio.c.old +0 -5
@@ -71,7 +71,6 @@
 	.probe  = bttv_sub_probe,
 	.remove = bttv_sub_remove,
 };
-EXPORT_SYMBOL(bttv_sub_bus_type);
 
 static void release_sub_device(struct device *dev)
 {
@@ -166,7 +167,6 @@
 	btwrite(data,BT848_GPIO_OUT_EN);
 	spin_unlock_irqrestore(&btv->gpio_lock,flags);
 }
-EXPORT_SYMBOL(bttv_gpio_inout);
 
 u32 bttv_gpio_read(struct bttv_core *core)
 {
@@ -176,7 +176,6 @@
 	value = btread(BT848_GPIO_DATA);
 	return value;
 }
-EXPORT_SYMBOL(bttv_gpio_read);
 
 void bttv_gpio_write(struct bttv_core *core, u32 value)
 {
@@ -184,7 +183,6 @@
 
 	btwrite(value,BT848_GPIO_DATA);
 }
-EXPORT_SYMBOL(bttv_gpio_write);
 
 void bttv_gpio_bits(struct bttv_core *core, u32 mask, u32 bits)
 {
@@ -199,7 +197,6 @@
 	btwrite(data,BT848_GPIO_DATA);
 	spin_unlock_irqrestore(&btv->gpio_lock,flags);
 }
-EXPORT_SYMBOL(bttv_gpio_bits);
 
 /*
  * Local variables:
drivers/media/video/bt8xx/bttv.h renamed from drivers/media/video/bt8xx/bttv.h.old +0 -24
@@ -287,17 +287,8 @@
 /* this obsolete -- please use the sysfs-based
    interface below for new code */
 
-/* returns card type + card ID (for bt878-based ones)
-   for possible values see lines below beginning with #define BTTV_BOARD_UNKNOWN
-   returns negative value if error occurred
-*/
-extern int bttv_get_cardinfo(unsigned int card, int *type,
-			     unsigned int *cardid);
 extern struct pci_dev* bttv_get_pcidev(unsigned int card);
 
-/* obsolete, use bttv_get_cardinfo instead */
-extern int bttv_get_id(unsigned int card);
-
 /* sets GPOE register (BT848_GPIO_OUT_EN) to new value:
    data | (current_GPOE_value & ~mask)
    returns negative value if error occurred
@@ -317,21 +308,6 @@
 extern int bttv_write_gpio(unsigned int card,
 			   unsigned long mask, unsigned long data);
 
-/* returns pointer to task queue which can be used as parameter to
-   interruptible_sleep_on
-   in interrupt handler if BT848_INT_GPINT bit is set - this queue is activated
-   (wake_up_interruptible) and following call to the function bttv_read_gpio
-   should return new value of GPDATA,
-   returns NULL value if error occurred or queue is not available
-   WARNING: because there is no buffer for GPIO data, one MUST
-   process data ASAP
-*/
-extern wait_queue_head_t* bttv_get_gpio_queue(unsigned int card);
-
-/* call i2c clients
-*/
-extern void bttv_i2c_call(unsigned int card, unsigned int cmd, void *arg);
-
 
 
 /* ---------------------------------------------------------- */
drivers/media/video/bt8xx/bttv-if.c renamed from drivers/media/video/bt8xx/bttv-if.c.old +0 -49

77 lines not on this page · raw message