vt1211: add probing of alternate config index
PATCH 1/1 vt1211: add probing of alternate config index
The configuration index port of the vt1211 can be accessed at two different addresses 0x2e or 0x4e, depending on pin strappings. This patch adds support to scan both addresses during module initialization.
Signed-off-by: Juerg Haefliger <juergh at gmail.com>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: hwmon-vt1211-add-probing-of-alternate-config-index-port.patch
Type: application/octet-stream
Size: 3565 bytes
Desc: not available
Url : http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20070130/2a33699f/attachment.obj
PATCH 1/1 vt1211: add probing of alternate config
Hi Juerg,
Quoted 6 lines · Juerg Haefliger
The configuration index port of the vt1211 can be accessed at two different addresses
0x2eor0x4e, depending on pin strappings. This patch adds support to scan both addresses during module initialization.Signed-off-by Juerg Haefliger <juergh at gmail.com>
Patch looks really good, applied, thanks. Hopefully Joe Friedrichsen will also confirm that the new vt1211 driver works OK for him now.
Signature · 1 line
Jean Delvare
PATCH 1/1 vt1211: add probing of alternate config
In reply to Juerg HaefligerQuoted 2 lines · Jean Delvare
Patch looks really good, applied, thanks. Hopefully Joe Friedrichsen will also confirm that the new vt1211 driver works OK for him now.
Sorry for the delay -- a friend asked me to help her move house. I have tomorrow/Monday off, so expect a report in a few hours.
Joe
PATCH 1/1 vt1211: add probing of alternate config
In reply to Juerg HaefligerQuoted 2 lines · Joe Friedrichsen
Sorry for the delay -- a friend asked me to help her move house. I have tomorrow/Monday off, so expect a report in a few hours.
The patched driver works. I used Juerg's patch on the vanilla 2.6.20 kernel and sensors reports:
vt1211-isa-ec00
Adapter: ISA adapter
+2.5V: +0.00 V (min = +2.10 V, max = +0.88 V) ALARM VCore: +0.00 V (min = +0.55 V, max = +2.39 V) ALARM +5V: +0.00 V (min = +5.66 V, max = +4.03 V) ALARM +12V: +0.00 V (min = +14.99 V, max = +10.65 V) ALARM +3.3V: +3.28 V (min = +3.13 V, max = +3.46 V) Case Fan: 0 RPM (min = 27306 RPM, div = 2) CPU Fan: 0 RPM (min = 5041 RPM, div = 2) CPU Temp: +145.0?C (high = +34?C, hyst = +89?C) Int Temp: +64.0?C (high = +199?C, hyst = +69?C)
ERROR: Can't get TEMP3 data!
vid: +1.700 V (VRM Version 9.0)
The chip really isn't wired to do much, as you can see. :-)
Thanks for your quick help!
Joe