pata_acpi driver
PATCH 1/1 pata_acpi driver
An ACPI[1] firmware driver for motherboard PATA ports.
Drives conventional IDE interface ports that have ACPI methods for firmware control. Generally this means the motherboard ide0/ide1 PATA ports, regardless of controller. It may not cover some controllers in non-legacy mode however.
This is linked near the end so that with built in drivers it will grab only ports that lack native drivers. The libata-acpi code is designed to be reusable as we will want to borrow a couple of bits for VIA and Nvidia cable detect.
Give it a test, see what it does. I don't entirely trust this code as it worked first time on my machine and that makes me suspicious..
Alan
[1] Another Crap Proposal Intel ;)
drivers/ata/Kconfig +9 -0
@@ -174,6 +174,15 @@ You can disable this at kernel boot time by using the option libata.noacpi=1 +config PATA_ACPI + tristate "ACPI firmware driver for PATA" + depends on ACPI && PCI && SATA_ACPI + help + This option enables an ACPI method driver which drives + motherboard PATA controller interfaces through the ACPI + firmware in the BIOS. This driver can sometimes handle + otherwise unsupported hardware. + config PATA_ALI tristate "ALi PATA support (Experimental)" depends on PCI && EXPERIMENTAL
drivers/ata/libata-acpi.c +89 -1
99 lines not on this page · raw message
drivers/ata/libata-acpi.h +47 -0
47 lines not on this page · raw message
drivers/ata/Makefile +2 -0
@@ -60,6 +60,8 @@ obj-$(CONFIG_PATA_TRIFLEX) += pata_triflex.o obj-$(CONFIG_PATA_IXP4XX_CF) += pata_ixp4xx_cf.o obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o +# Should be last but two libata driver +obj-$(CONFIG_PATA_ACPI) += pata_acpi.o # Should be last but one libata driver obj-$(CONFIG_ATA_GENERIC) += ata_generic.o # Should be last libata driver
drivers/ata/pata_acpi.c +398 -0
398 lines not on this page · raw message
Quoted 9 lines · Alan
An ACPI[1] firmware driver for motherboard PATA ports.
+int
ata_acpi_stm(const struct ata_port *ap, void *handle, struct acpi_gtm *stm)drivers/ata/libata-acpi.c +5
-0+{ +acpi_status status; +struct acpi_object_list input; +union acpi_object in_params[3 ]; +
drivers/ata/libata-acpi.c line 737
Quoted 10 lines
drivers/ata/libata-acpi.c +10
-0+ in_params[0 ].type =ACPI_TYPE_BUFFER ; + in_params[0 ].buffer.length =sizeof (struct acpi_gtm ); + in_params[0 ].buffer.pointer = (u8 *)stm; +/* Buffers for id may need byteswapping ? */ + in_params[1 ].type =ACPI_TYPE_BUFFER ; + in_params[1 ].buffer.length =512 ; + in_params[1 ].buffer.pointer = (u8 *)ap->device[0 ].id; + in_params[2 ].type =ACPI_TYPE_BUFFER ; + in_params[2 ].buffer.length =512 ; + in_params[1 ].buffer.pointer = (u8 *)ap->device[1 ].id;
Must be a typo. [2]
Quoted 5 lines
drivers/ata/libata-acpi.c line 737
Quoted 3 lines
drivers/ata/libata-acpi.c +3
-0+ in_params[2 ].type =ACPI_TYPE_BUFFER ; + in_params[2 ].buffer.length =512 ; + in_params[1 ].buffer.pointer = (u8 *)ap->device[1 ].id;Must be a typo. [2]
Indeed it is - thanks.
Alan