2.6.20-rc6-mm3
Subsystems (11)
Andrew Morton
AppliedTemporarily at
http://userweb.kernel.org/~akpm/2.6.20-rc6-mm3/
Will appear later at
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.20-rc6/2.6.20-rc6-mm3/
- Restored git-block.patch: mainly the block unplugging rework. The problematic CFQ updates have been taken out.
- Restored the fsaio patches as a consequence.
- A huge ACPI update.
- A decent number of x86 patches have been temporarily dropped due to their clash against the ACPI update.
- A few problems reported against 2.6.20-rc6-mm2 have been fixed.
Boilerplate:
- See the `hot-fixes' directory for any important updates to this patchset.
- To fetch an -mm tree using git, use (for example)
git-fetch git://git.kernel.org/pub/scm/linux/kernel/git/smurf/linux-trees.git tag v2.6.16-rc2-mm1 git-checkout -b local-v2.6.16-rc2-mm1 v2.6.16-rc2-mm1
- -mm kernel commit activity can be reviewed by subscribing to the mm-commits mailing list.
echo "subscribe mm-commits" | mail [email protected]
- If you hit a bug in -mm and it is not obvious which patch caused it, it is most valuable if you can perform a bisection search to identify which patch introduced the bug. Instructions for this process are at
http://www.zip.com.au/~akpm/linux/patches/stuff/bisecting-mm-trees.txt
But beware that this process takes some time (around ten rebuilds and reboots), so consider reporting the bug first and if we cannot immediately identify the faulty patch, then perform the bisection search.
- When reporting bugs, please try to Cc: the relevant maintainer and mailing list on any email.
- When reporting bugs in this kernel via email, please also rewrite the email Subject: in some manner to reflect the nature of the bug. Some developers filter by Subject: when looking for messages to read.
- Semi-daily snapshots of the -mm lineup are uploaded to ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/mm/ and are announced on the mm-commits list.
Changes since 2.6.20-rc6-mm2:
origin.patch
git-acpi.patch
git-ibm-acpi.patch
git-alsa.patch
git-agpgart.patch
git-arm.patch
git-avr32.patch
git-cpufreq.patch
git-powerpc.patch
git-drm.patch
git-dvb.patch
git-gfs2-nmw.patch
git-hid.patch
git-ieee1394.patch
git-infiniband.patch
git-input.patch
git-jfs.patch
git-libata-all.patch
git-lxdialog.patch
git-mips.patch
git-mmc.patch
git-mtd.patch
git-ubi.patch
git-netdev-all.patch
git-net.patch
git-ioat.patch
git-ocfs2.patch
git-pciseg.patch
git-s390.patch
git-sh.patch
git-scsi-misc.patch
git-scsi-rc-fixes.patch
git-block.patch
git-qla3xxx.patch
git-unionfs.patch
git-watchdog.patch
git-ipwireless_cs.patch
git-cryptodev.patch
git-gccbug.patch
git trees
-bonding-arp-monitoring-broken-on-x86_64.patch -powerpc-fix-sys_pciconfig_iobase-bus-matching.patch -netfilter-is-subscribers-only.patch -remove-useless-reference-to-obsolete-kerneld.patch -sound-isa-gus-gus_mainc-use-abs-instead-of-x-0-x-x.patch -fix-gfs2-circular-dependency.patch -git-ieee1494-build-fix.patch -git-netdev-all-fixup.patch -pnpacpi-remove-experimental-dependency.patch -cdevh-forward-declarations.patch
Merged into mainline or a subsystem tree.
+fuse-fix-bug-in-control-filesystem-mount.patch +cdevh-forward-declarations.patch +fix-via-irq-quirk-breakage.patch +i386-in-assign_irq_vector-look-at-all-vectors-before-giving-up.patch +translate-dashes-in-filenames-for-headers-install.patch +remove-warning-vfs-is-out-of-sync-with-lock-manager.patch +scsi_ioctl-sg_io-timeout-conversion-fix.patch +fix-for-patch-ecdfc9787fe527491baefc22dce8b2dbd5b2908d.patch
2.6.20 queue.
+enable-mouse-button-23-emulation-for-x86-macs.patch
Might be 2.6.20.
-x86-fix-vdso-mapping-for-aout-executables-fixes.patch -x86-fix-vdso-mapping-for-aout-executables-fixes-2.patch -x86-fix-vdso-mapping-for-aout-executables-cleanups.patch -x86-fix-vdso-mapping-for-aout-executables-doh.patch -x86-fix-vdso-mapping-for-aout-executables-sh-fix.patch -x86-fix-vdso-mapping-for-aout-executables-x86_64-fixpatch.patch
Folded into x86-fix-vdso-mapping-for-aout-executables.patch
+acpi-updates-rtc-cmos-device-platform_data-vs-git-acpi.patch
Update acpi-updates-rtc-cmos-device-platform_data.patch for git-acpi.
+drivers-acpi-hotkeyc-make-2-structs-static.patch
ACPI cleanup
+powerpc-rtas-msi-support.patch
powerpc MSI support
+spider-fix-gregkh-driver-network-device.patch
Fix gregkh patch
+drivers-media-video-cafe_ccicc-fix-warning.patch
+cx88-videoc-remove-struct-radionorms.patch
+if-0-v4l_printk_ioctl_arg.patch
DVB things
+tsl2550-support-i2c-device-driver.patch
I2C driver
+config_input_debug-improvements.patch
input Kconfig tweaks
+make-help-in-build-tree-doesnt-show-headers_-targets.patch +kbuild-remove-references-to-deprecated-prepare-all-target.patch +new-toplevel-target-headers_check_all.patch
kbuild things
+libata-fix-translation-for-start-stop-unit.patch
libata fix
+ehea-fixed-wrong-jumbo-frames-status-query.patch
+ehea-fixed-missing-tasklet_kill-call.patch
+sky2-fix-msi-related-resume-breakage.patch
netdev fixes
+bonding-arp-monitoring-broken-on-x86_64.patch
net fix
+fix-i-oat-for-kexec.patch
Fix IOAT driver.
+git-block-fixup.patch
+git-block-borkage.patch
+git-block-atomicity-fix.patch
Restore git-block fixes
+drivers-char-pcmcia-ipwireless_cs_-possible-cleanups.patch
Fix git-ipwireless_cs.patch
-x86_64-mm-amd-tsc-sync.patch -x86_64-mm-always-use-physical-delivery-mode-on-8-cpus.patch -x86_64-mm-remove-es7000-workaround.patch -x86_64-mm-remove-clustered-apic-mode.patch -x86_64-mm-default-to-physical-mode-on-hotplug-cpu-kernels.patch -x86_64-mm-share-whats-shareable.patch -x86_64-mm-only-call-unreachable_devices-when-type-1-is-available.patch -x86_64-mm-only-map-whats-necessary.patch -x86_64-mm-detect-and-support-the-e7520-and-the-945g-gz-p-pl.patch -x86_64-mm-reserve-resources-but-only-when-were-sure-about-them.patch -x86_64-mm-fix-x86_64-ioremap-base_address.patch -x86_64-mm-reject-a-broken-mcfg-tables-on-asus-etc.patch -x86_64-mm-readd-fadt-physflat.patch
Temporarily dropped due to clashes with new git-acpi tree.
-mmconfig-cleanup.patch
-mmconfig-fix-unreachable_devices.patch
-i386-modpost-apic-related-warning-fixes.patch
Ditto.
-remove-final-vestiges-of-config_unwind_info.patch
Dropped
+i386-probe_roms-cleanup.patch +x86_64-sync-up-probe_roms-with-i386.patch +i386-add-option-to-show-more-code-in-oops-reports.patch +use-__u32-in-asm-x86_64-msrh.patch +cleanup-x86_64-mm-vmi-timer.patch
x86 updates.
+page_mkwrite-race-fix.patch
VM fix
+sn2-use-static-proc_fops.patch
ia64 cleanup
+replace-highest_possible_node_id-with-nr_node_ids-fix.patch +convert-highest_possible_processor_id-to-nr_cpu_ids.patch
Fix patches in -mm.
-mm-search_binary_handler-mem-limit-fix.patch
Dropped.
+highmem-catch-illegal-nesting.patch +change-constant-zero-to-notify_done-in-ratelimit_handler.patch
Misc updates.
+tick-management-dyntick--highres-functionality-fix.patch +tick-management-dyntick--highres-functionality-fix-2.patch
Fix tick-management-dyntick--highres-functionality.patch
+kblockd-use-flush_work.patch
Restore this due to git-block restoration.
+ecryptfs-generalize-metadata-read-write-fs-ecryptfs-make-code-static.patch
Fix ecryptfs-generalize-metadata-read-write.patch
+fsaio-add-a-wait-queue-arg-to-the-wait_bit-action-routine.patch +fsaio-add-a-wait-queue-arg-to-the-wait_bit-action-routine-gfs2-fix.patch +fsaio-rename-__lock_page-to-lock_page_blocking.patch +fsaio-interfaces-to-initialize-and-to-test-a-wait-bit-key.patch +fsaio-add-a-default-io-wait-bit-field-in-task-struct.patch +fsaio-enable-wait-bit-based-filtered-wakeups-to-work-for-aio.patch +fsaio-enable-wait-bit-based-filtered-wakeups-to-work-for-aio-fix.patch +fsaio-enable-wait-bit-based-filtered-wakeups-to-work-for-aio-fix-sparse-fix.patch +fsaio-enable-asynchronous-wait-page-and-lock-page.patch +fsaio-filesystem-aio-read.patch +fsaio-aio-o_sync-filesystem-write.patch
Restore these due to git-block restoration.
+rcu-debug-trace-for-rcu-fix.patch
+rcu-debug-trace-for-rcu-fix-2.patch
Fix rcu-debug-trace-for-rcu.patch
+ufs2-write-mount-as-rw.patch
+ufs2-write-inodes-write.patch
+ufs2-write-block-allocation-update.patch
UFS2 write support.
+readahead-min-max-sizes-increase-vm_min_readahead-to-32kb.patch +readahead-state-based-method-prevent-tiny-size.patch +readahead-state-based-method-move-readahead_ratio-out-of-compute_thrashing_threshold.patch +readahead-initial-method-user-recommended-size-rename-to-read_ahead_initial_kb.patch +readahead-thrashing-recovery-method-fix.patch +readahead-call-scheme-fix-thrashed-unaligned-read.patch +readahead-laptop-mode-fix.patch
Update readahead patches in -mm.
+sysctl-move-utsname-sysctls-to-their-own-file-fix.patch
Fix sysctl-move-utsname-sysctls-to-their-own-file.patch
All 1487 patches:
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.20-rc6/2.6.20-rc6-mm3/patch-list
Quoted 12 lines · Andrew Morton
Temporarily at
http://userweb.kernel.org/~akpm/2.6.20-rc6-mm3/Will appear later at
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.20-rc6/2.6.20-rc6-mm3/- Restored git-block.patch: mainly the block unplugging rework. The problematic CFQ updates have been taken out.
Quoted 8 lines
- Restored the fsaio patches as a consequence.
- A huge ACPI update.
- A decent number of x86 patches have been temporarily dropped due to their clash against the ACPI update.
- A few problems reported against 2.6.20-rc6-mm2 have been fixed.
Now that kevent work has settled down, would you be open to including it in -mm?
Jeff
Quoted 17 lines · On Mon, 29 Jan 2007 23:50:51 -0500 Jeff Garzik <[email protected]> wrote:
Quoted 16 lines · Andrew Morton
Temporarily at
http://userweb.kernel.org/~akpm/2.6.20-rc6-mm3/Will appear later at
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.20-rc6/2.6.20-rc6-mm3/- Restored git-block.patch: mainly the block unplugging rework. The problematic CFQ updates have been taken out.
- Restored the fsaio patches as a consequence.
- A huge ACPI update.
Quoted 8 lines
Quoted 4 lines
- A decent number of x86 patches have been temporarily dropped due to their clash against the ACPI update.
- A few problems reported against 2.6.20-rc6-mm2 have been fixed.
Now that kevent work has settled down, would you be open to including it in -mm?
I just haven't had the bandwidth to track what's been happening there lately. The two main things which need to be done are
- a detailed line-by-line review
- for someone to gain a full understanding of the delta between <these patches> and <ulrich> and to explain these differences to mortals and to convince themselves and the rest of us that we're all OK.
Quoted 4 lines · Andrew Morton
Quoted 3 lines
Now that kevent work has settled down, would you be open to including it in -mm?
Quoted 8 lines
I just haven't had the bandwidth to track what's been happening there lately. The two main things which need to be done are
- a detailed line-by-line review
- for someone to gain a full understanding of the delta between <these patches> and <ulrich> and to explain these differences to mortals and to convince themselves and the rest of us that we're all OK.
This requires either mind-reading machine, or some feedback from Ulrich. Last main from him about kevent was related to 25 release.
As far as I can see, only questionable parts are signal mask in syscalls, but nature of kevent signal delivering does not require it, since mask of pending signals is not updated if special flag is set, and exceeded functionality (like hrtimers accessible through kevent interface and as POSIX addon).
Signature · 1 line
Evgeniy Polyakov
Quoted 4 lines · Andrew Morton
- If you hit a bug in -mm and it is not obvious which patch caused it, it is most valuable if you can perform a bisection search to identify which patch introduced the bug. Instructions for this process are at
I am hit with a compile error! Here is the info:-
CC [M] drivers/net/chelsio/cxgb2.o CC [M] drivers/net/chelsio/espi.o CC [M] drivers/net/chelsio/tp.o CC [M] drivers/net/chelsio/pm3393.o CC [M] drivers/net/chelsio/sge.o
drivers/net/chelsio/sge.c: In function 't1_interrupt':drivers/net/chelsio/sge.c:1705: error: expected ')' before 'work_done' drivers/net/chelsio/sge.c:1722: error: expected expression before '}' token drivers/net/chelsio/sge.c:1697: warning: unused variable 'work_done' drivers/net/chelsio/sge.c:1722: warning: no return statement in function returning non-void
make[3]: *** [drivers/net/chelsio/sge.o] Error 1
make[2]: *** [drivers/net/chelsio] Error 2
make[1]: *** [drivers/net] Error 2
make: *** [drivers] Error 2
~Akula2
Quoted 13 lines · On Tue, 30 Jan 2007 13:46:54 +0530 "Sunil Naidu" <[email protected]> wrote:
Quoted 4 lines · Andrew Morton
- If you hit a bug in -mm and it is not obvious which patch caused it, it is most valuable if you can perform a bisection search to identify which patch introduced the bug. Instructions for this process are at
I am hit with a compile error! Here is the info:-
CC [M] drivers/net/chelsio/cxgb2.o CC [M] drivers/net/chelsio/espi.o CC [M] drivers/net/chelsio/tp.o CC [M] drivers/net/chelsio/pm3393.o CC [M] drivers/net/chelsio/sge.o
Quoted 10 lines
drivers/net/chelsio/sge.c: In function 't1_interrupt':drivers/net/chelsio/sge.c:1705: error: expected ')' before 'work_done'drivers/net/chelsio/sge.c:1722: error: expected expression before '}' tokendrivers/net/chelsio/sge.c:1697: warning: unused variable 'work_done'drivers/net/chelsio/sge.c:1722: warning: no return statement in function returning non-void
make[3]: *** [drivers/net/chelsio/sge.o] Error 1
make[2]: *** [drivers/net/chelsio] Error 2
make[1]: *** [drivers/net] Error 2
make: *** [drivers] Error 2
drivers/net/chelsio/sge.c renamed from drivers/net/chelsio/sge.c~git-netdev-all-chelsio-fix +1 -1
@@ -1701,7 +1701,7 @@ irqreturn_t t1_interrupt(int irq, void *writel (F_PL_INTR_SGE_DATA , adapter->regs +A_PL_CAUSE ); - if (likely(responses_pending(adapter)) +if (likely (responses_pending (adapter))) work_done =process_responses (adapter,-1 );else work_done =t1_slow_intr_handler (adapter);
_
Review
Quoted 5 lines · Andrew Morton
(quoted diff) +0
-5-x86_64-mm-share-whats-shareable.patch -x86_64-mm-only-call-unreachable_devices-when-type-1-is-available.patch -x86_64-mm-only-map-whats-necessary.patch -x86_64-mm-detect-and-support-the-e7520-and-the-945g-gz-p-pl.patch -x86_64-mm-reserve-resources-but-only-when-were-sure-about-them.patch
Want me to update these? And maybe the other mmconfig related ones if I can find them.
OG.
Quoted 10 lines · On Tue, 30 Jan 2007 10:06:45 +0100 Olivier Galibert <[email protected]> wrote:
Review
Quoted 5 lines · Andrew Morton
(quoted diff) +0
-5-x86_64-mm-share-whats-shareable.patch -x86_64-mm-only-call-unreachable_devices-when-type-1-is-available.patch -x86_64-mm-only-map-whats-necessary.patch -x86_64-mm-detect-and-support-the-e7520-and-the-945g-gz-p-pl.patch -x86_64-mm-reserve-resources-but-only-when-were-sure-about-them.patchWant me to update these? And maybe the other mmconfig related ones if I can find them.
Thanks. That depends upon which of Andi or Len merges first.
If Andi goes first, then Len has rather a bit of hackwork to do.
If Len goes first then things are probably simpler, but that ACPI codedrop is very new and might have problems. We wouldn't want to hold the x86 merge back because of it.
For now, I guess we sit back while Len and Andi sort out what they're going to do.
Len, what was in that merge anyway? Lots of renaming and shuffling things around - the sorts of things which are safe as long as they compile OK. But was there much substantive material in there as well?
Quoted 3 lines · Andrew Morton
Len, what was in that merge anyway? Lots of renaming and shuffling things around - the sorts of things which are safe as long as they compile OK. But was there much substantive material in there as well?
It seems heavy in general, but the intersection with mmconfig looks rather limited:
- s/acpi_table_mcfg_config/acpi_mcfg_allocation/
- s/base_address/address/
- s/pci_segment_group_number/pci_segment/
- address is now 64 bits
The last point is both good and bad. The i965 needs it (good), I don't know if the mapping functions can handle actual 64bits addresses (maybe bad), especially on i386.
OG.
Len Brown
reviewerQuoted 3 lines · Andrew Morton
Len, what was in that merge anyway? Lots of renaming and shuffling things around - the sorts of things which are safe as long as they compile OK. But was there much substantive material in there as well?
The big thing was the new table manager.
Linux used to have multiple copies of the ACPI tables -- sometimes inconsistent. Now, we use a single copy of each table.
Indeed, with the exception of the FADT -- where we need to convert multiple versions into a single version, we map the tables directly where the BIOS gives them to us and thus don't allocate any memory for them at all.
cheers,
-Len
Len Brown
reviewerQuoted 14 lines · Andrew Morton
Quoted 10 lines · On Tue, 30 Jan 2007 10:06:45 +0100 Olivier Galibert <[email protected]> wrote:
Review
Quoted 5 lines · Andrew Morton
(quoted diff) +0
-5-x86_64-mm-share-whats-shareable.patch -x86_64-mm-only-call-unreachable_devices-when-type-1-is-available.patch -x86_64-mm-only-map-whats-necessary.patch -x86_64-mm-detect-and-support-the-e7520-and-the-945g-gz-p-pl.patch -x86_64-mm-reserve-resources-but-only-when-were-sure-about-them.patchWant me to update these? And maybe the other mmconfig related ones if I can find them.
Quoted 7 lines
Thanks. That depends upon which of Andi or Len merges first.
If Andi goes first, then Len has rather a bit of hackwork to do.
If Len goes first then things are probably simpler, but that ACPI codedrop is very new and might have problems. We wouldn't want to hold the x86 merge back because of it.
I think chances are actually quite good we'll be able to proceed with pushing the ACPI table re-write immediately upon 2.6.21 open.
Note that while it is sort of big text-wise, it isn't that complicated -- and failures in this type of code tend to be massively obvious boot failures. Note also that 2.6.20-rc6-mm3 is not the maiden voyage to -mm for this code. It has been there several times before as it has matured.
The table re-write broke the HP simulator -- but I think we can fix that quickly. I don't know yet what broke the HP rx2600.
The sysfs branch is what broke the button and the Altix boot.
Sysfs may or may not go upstream at 2.6.21 open -- but that isn't the code you are conflicting with here so that is moot.
cheers,
-Len
Quoted 13 lines
For now, I guess we sit back while Len and Andi sort out what they're going to do.
Len, what was in that merge anyway? Lots of renaming and shuffling things around - the sorts of things which are safe as long as they compile OK. But was there much substantive material in there as well?
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Andrew Morton napisał(a):
Quoted 9 lines
Temporarily at
http://userweb.kernel.org/~akpm/2.6.20-rc6-mm3/Will appear later at
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.20-rc6/2.6.20-rc6-mm3/
Quoted 6 lines
- Restored git-block.patch: mainly the block unplugging rework. The problematic CFQ updates have been taken out.
- Restored the fsaio patches as a consequence.
- A huge ACPI update.
I have two problems. First suspend to disk.
After suspend to disk (before resume) I check time in bios, and it's correct, but during resume, I have this message:
"Suspending console(s)"
system wait 20 seconds (or more) until finish resume. Also system clock was slow about this 20 seconds.
Second problem, power button doesn't work. When I pressed it, I has this error:
ACPI Error (evevent-0305): No installed handler for fixed event [00000002] [20070126]
Signature · 1 line
Maciej Rutecki <[email protected]>
Quoted 19 lines · On Tue, 30 Jan 2007 23:18:42 +0100 Maciej Rutecki <[email protected]>…
Andrew Morton
napisa__(a):Quoted 9 lines
Temporarily at
http://userweb.kernel.org/~akpm/2.6.20-rc6-mm3/Will appear later at
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.20-rc6/2.6.20-rc6-mm3/Quoted 6 lines
- Restored git-block.patch: mainly the block unplugging rework. The problematic CFQ updates have been taken out.
- Restored the fsaio patches as a consequence.
- A huge ACPI update.
I have two problems. First suspend to disk.
Quoted 7 lines
After suspend to disk (before resume) I check time in bios, and it's correct, but during resume, I have this message:
"Suspending console(s)"
system wait 20 seconds (or more) until finish resume. Also system clock was slow about this 20 seconds.
OK, thanks. That might be due to the time-management updates as well. I'll see if I can reproduce this.
If you're keen, you could test just 2.6.19-rc6+origin.patch+git-acpi.patch
from ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.20-rc6/2.6.20-rc6-mm3/broken-out and see which of these problems remain.
Quoted 5 lines
Second problem, power button doesn't work. When I pressed it, I has this error:
ACPI Error (evevent-0305): No installed handler for fixed event [00000002] [20070126]
That sounds like an acpi regression, yup.
Am Dienstag, 30. Januar 2007 23:27 schrieb Andrew Morton:
Quoted 2 lines
On Tue, 30 Jan 2007 23:18:42 +0100
Maciej Rutecki <[email protected]> wrote:
<...>
Quoted 10 lines
Quoted 9 lines
I have two problems. First suspend to disk.
After suspend to disk (before resume) I check time in bios, and it's correct, but during resume, I have this message:
"Suspending console(s)"
system wait 20 seconds (or more) until finish resume. Also system clock was slow about this 20 seconds.
Quoted 7 lines
OK, thanks. That might be due to the time-management updates as well. I'll see if I can reproduce this.
If you're keen, you could test just 2.6.19-rc6+origin.patch+git-acpi.patch
from ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.20-rc6/2.6.20-rc6-mm3/broken-out and see which of these problems remain.
Similar weirdness here on rc6-mm2 and rc6-rt*:
resume from disk waits unduly long.
I played with bios clock setting after I wondered why susp/res
wouldn't work overnight:
the longer the (faked/real) suspend to disk time,
the longer the (not seen on 2.6.18-rt) waiting past the incrementing % display, before things are running again.
After turning time backwards in bios, console mouse handler gpm experiences "interrupted system call".
Some waiting times from rc6-rt6 from memory:
Config | HZ | NO_HZ + HRESTIMERS
cmos clock unchanged | 2s | 6s
cmos clock += 10min | | 2 minutes
cmos clock += 2 month | 20s | > 4minutes, test interrupted
Karsten
Quoted 2 lines · Karsten Wiese
Similar weirdness here on rc6-mm2 and rc6-rt*: resume from disk waits unduly long.
i'm wondering whether the jiffies update fix from Thomas fixes this bug for you.
If not then do you have a serial console enabled?
Quoted 6 lines
Some waiting times from rc6-rt6 from memory:
Config | HZ |
NO_HZ+ HRESTIMERS
cmos clock unchanged | 2s | 6s
cmos clock += 10min | | 2 minutes
cmos clock += 2 month | 20s | > 4minutes, test interrupted
i've seen something like this on -rt (and incorrectly attributed it to -rt) when running on a system which has a serial port and which has a kernel console on that serial port. What happens is that after resume (and straight after console suspend) every serial character printed takes /alot/ of time - and resume does print a number of kernel messages to the console. I didnt get any further in debugging this though, but disabling the serial console made the problem go away.
a possibly related thing: the serial code is sensitive to jiffies updates and timers, i saw that during early revisions of the dynticks code - but the specifics escape me.
the slowdown could also be something like the kernel somehow wrapping around jiffies and thus doing /alot/ of jiffy ticks? Or it could be a miscalculation in the amount of jiffies that need updating, resulting in a similar number of loops in the jiffy update code.
(i'll try to figure out this regression - but wanted to describe to you the known things so far, maybe you'll figure it out faster than me.)
Ingo
Am Mittwoch, 31. Januar 2007 14:22 schrieb Ingo Molnar:
Quoted 30 lines · Karsten Wiese
Quoted 3 lines
Similar weirdness here on rc6-mm2 and rc6-rt*: resume from disk waits unduly long.
i'm wondering whether the jiffies update fix from Thomas fixes this bug for you.
If not then do you have a serial console enabled?
Quoted 6 lines
Some waiting times from rc6-rt6 from memory:
Config | HZ |
NO_HZ+ HRESTIMERS
cmos clock unchanged | 2s | 6s
cmos clock += 10min | | 2 minutes
cmos clock += 2 month | 20s | > 4minutes, test interruptedi've seen something like this on -rt (and incorrectly attributed it to -rt) when running on a system which has a serial port and which has a kernel console on that serial port. What happens is that after resume (and straight after console suspend) every serial character printed takes /alot/ of time - and resume does print a number of kernel messages to the console. I didnt get any further in debugging this though, but disabling the serial console made the problem go away.
a possibly related thing: the serial code is sensitive to jiffies updates and timers, i saw that during early revisions of the dynticks code - but the specifics escape me.
Quoted 7 lines
the slowdown could also be something like the kernel somehow wrapping around jiffies and thus doing /alot/ of jiffy ticks? Or it could be a miscalculation in the amount of jiffies that need updating, resulting in a similar number of loops in the jiffy update code.
(i'll try to figure out this regression - but wanted to describe to you the known things so far, maybe you'll figure it out faster than me.)
Serial port console is off here and the jiffies update fix doesn't make a noticeable difference.
I've just captured a dmesglog of 3 suspend/resume cycles with printk timestamps. Config has NO_HZ and HRESTIMERS.
In the 1st 2 cycles, while in bios, I advanced the cmos clock by ~4minutes, In the last cycle by ~2minutes.
After the
lapic resume on CPU#0
entries there are roughly proportional timestamp differences of ~60s, ~60s and ~35s. Those equal the unexpected wait times.
Will look into what happens between "lapic resume on CPU#0" and "pci 0000:00:00.0: EARLY resume" next.
Karsten
[ 0.000000] Linux version 2.6.20-rc6-rt6.dbg ([email protected]) (gcc-Version 4.1.1 20070105 (Red Hat 4.1.1-51)) #3 PREEMPT Wed Jan 31 14:25:07 CET 2007 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] sanitize start [ 0.000000] sanitize end [ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2 [ 0.000000] copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2 [ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000003fef0000 end: 000000003fff0000 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000003fff0000 size: 0000000000008000 end: 000000003fff8000 type: 3 [ 0.000000] copy_e820_map() start: 000000003fff8000 size: 0000000000008000 end: 0000000040000000 type: 4 [ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2 [ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2 [ 0.000000] copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2 [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff8000 (ACPI data) [ 0.000000] BIOS-e820: 000000003fff8000 - 0000000040000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] 127MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000fbfc0 [ 0.000000] Entering add_active_range(0, 0, 262128) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 262128 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 262128 [ 0.000000] On node 0 totalpages: 262128 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 255 pages used for memmap [ 0.000000] HighMem zone: 32497 pages, LIFO batch:7 [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP (v000 AMI ) @ 0x000fa3c0 [ 0.000000] ACPI: RSDT (v001 AMIINT VIA_K8 0x00000010 MSFT 0x00000097) @ 0x3fff0000 [ 0.000000] ACPI: FADT (v001 AMIINT VIA_K8 0x00000011 MSFT 0x00000097) @ 0x3fff0030 [ 0.000000] ACPI: MADT (v001 AMIINT VIA_K8 0x00000009 MSFT 0x00000097) @ 0x3fff00c0 [ 0.000000] ACPI: DSDT (v001 VIA VIA_K8 0x00001000 MSFT 0x0100000d) @ 0x00000000 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:15 APIC version 16 [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) [ 0.000000] Detected 2000.346 MHz processor. [ 22.477053] Real-Time Preemption Support (C) 2004-2007 Ingo Molnar [ 22.477060] Built 1 zonelists. Total pages: 260081 [ 22.477146] Kernel command line: ro root=LABEL=/ agp=off selinux=off 1 [ 22.477412] mapped APIC to ffffd000 (fee00000) [ 22.477416] mapped IOAPIC to ffffc000 (fec00000) [ 22.477421] Enabling fast FPU save and restore... done. [ 22.477425] Enabling unmasked SIMD FPU exception support... done. [ 22.477434] Initializing CPU#0 [ 22.477439] WARNING: experimental RCU implementation. [ 22.477502] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 22.479554] Console: colour VGA+ 80x25 [ 22.485288] num_possible_cpus(): 1 [ 22.486711] CPU#0: allocated 2097152 bytes trace buffer. [ 22.488149] CPU#0: allocated 2097152 bytes max-trace buffer. [ 22.489599] allocated 2097152 bytes out-trace buffer. [ 22.489712] tracer: a total of 6291456 bytes allocated. [ 22.489823] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 22.489989] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 22.490099] ... MAX_LOCK_DEPTH: 30 [ 22.490210] ... MAX_LOCKDEP_KEYS: 2048 [ 22.490320] ... CLASSHASH_SIZE: 1024 [ 22.490429] ... MAX_LOCKDEP_ENTRIES: 8192 [ 22.490539] ... MAX_LOCKDEP_CHAINS: 16384 [ 22.490648] ... CHAINHASH_SIZE: 8192 [ 22.490757] memory used by lock dependency info: 1096 kB [ 22.490868] per task-struct memory footprint: 1200 bytes [ 22.491291] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 22.491835] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 22.521443] Memory: 1024840k/1048512k available (2187k kernel code, 22908k reserved, 1039k data, 200k init, 131008k highmem) [ 22.521627] virtual kernel memory layout: [ 22.521629] fixmap : 0xfffaa000 - 0xfffff000 ( 340 kB) [ 22.521632] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 22.521634] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 22.521637] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 22.521639] .init : 0xc042a000 - 0xc045c000 ( 200 kB) [ 22.521642] .data : 0xc0322f25 - 0xc0426d34 (1039 kB) [ 22.521644] .text : 0xc0100000 - 0xc0322f25 (2187 kB) [ 22.522511] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 22.602851] Calibrating delay using timer specific routine.. 4005.80 BogoMIPS (lpj=8011611) [ 22.603165] Security Framework v1.0.0 initialized [ 22.603279] Capability LSM initialized [ 22.603386] Failure registering Root Plug module with the kernel [ 22.603501] Failure registering Root Plug module with primary security module. [ 22.603700] Mount-cache hash table entries: 512 [ 22.604173] CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000000 00000000 00000000 [ 22.604191] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 22.604308] CPU: L2 Cache: 512K (64 bytes/line) [ 22.604419] CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000000 00000000 00000000 [ 22.604435] Intel machine check architecture supported. [ 22.604547] Intel machine check reporting enabled on CPU#0. [ 22.604667] CPU: AMD Athlon(tm) 64 Processor 3200+ stepping 00 [ 22.604880] Checking 'hlt' instruction... OK. [ 22.618969] ACPI: Core revision 20060707 [ 22.625743] ENABLING IO-APIC IRQs [ 22.626171] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0 [ 22.879023] NET: Registered protocol family 16 [ 22.879415] ACPI: bus type pci registered [ 22.880276] PCI: PCI BIOS revision 2.10 entry at 0xfdae1, last bus=1 [ 22.880389] PCI: Using configuration type 1 [ 22.880498] Setting up standard PCI resources [ 22.900250] ACPI: Interpreter enabled [ 22.900362] ACPI: Using IOAPIC for interrupt routing [ 22.901486] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 22.901607] PCI: Probing PCI hardware (bus 00) [ 22.903444] PCI: MSI-K8T-Neo2Fir, attempting to turn soundcard ON [ 22.903560] PCI: MSI-K8T-Neo2Fir, soundcard on [ 22.904032] Boot video device is 0000:01:00.0 [ 22.904104] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 22.966889] ACPI: Power Resource [URP1] (off) [ 22.967146] ACPI: Power Resource [URP2] (off) [ 22.967402] ACPI: Power Resource [FDDP] (off) [ 22.967659] ACPI: Power Resource [LPTP] (off) [ 22.972136] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 22.973387] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 22.974680] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 22.975916] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 22.977195] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 22.978646] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 22.980038] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 22.981427] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 22.982719] Linux Plug and Play Support v0.97 (c) Adam Belay [ 22.982852] pnp: PnP ACPI init [ 22.989499] pnp: PnP ACPI: found 10 devices [ 22.989854] usbcore: registered new interface driver usbfs [ 22.990050] usbcore: registered new interface driver hub [ 22.990291] usbcore: registered new device driver usb [ 22.990502] PCI: Using ACPI for IRQ routing [ 22.990613] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 22.994622] NetLabel: Initializing [ 22.994728] NetLabel: domain hash size = 128 [ 22.994837] NetLabel: protocols = UNLABELED CIPSOv4 [ 22.994981] NetLabel: unlabeled traffic allowed by default [ 22.996525] PCI: Bridge: 0000:00:01.0 [ 22.996633] IO window: disabled. [ 22.996744] MEM window: cde00000-cfefffff [ 22.996856] PREFETCH window: bdd00000-cdcfffff [ 22.996985] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 22.997039] NET: Registered protocol family 2 [ 23.018195] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 23.018625] TCP established hash table entries: 32768 (order: 9, 2752512 bytes) [ 23.030734] TCP bind hash table entries: 16384 (order: 8, 1310720 bytes) [ 23.036900] TCP: Hash tables configured (established 32768 bind 16384) [ 23.037035] TCP reno registered [ 23.042355] checking if image is initramfs... it is [ 23.136643] Freeing initrd memory: 1256k freed [ 23.137406] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 23.137520] apm: overridden by ACPI. [ 23.138340] audit: initializing netlink socket (disabled) [ 23.138495] audit(1170253668.500:1): initialized [ 23.138842] highmem bounce pool size: 64 pages [ 23.138954] Total HugeTLB memory allocated, 0 [ 23.139322] VFS: Disk quotas dquot_6.5.1 [ 23.139459] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 23.139913] io scheduler noop registered [ 23.140071] io scheduler anticipatory registered [ 23.140229] io scheduler deadline registered [ 23.140407] io scheduler cfq registered (default) [ 23.140706] PCI: Bypassing VIA 8237 APIC De-Assert Message [ 23.140994] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 23.152923] Real Time Clock Driver v1.12ac [ 23.153244] Non-volatile memory driver v1.2 [ 23.153357] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 23.409586] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 23.410579] 00:01: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 23.412600] RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize [ 23.413058] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 23.413176] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 23.413449] VP_IDE: IDE controller at PCI slot 0000:00:0f.0 [ 23.413584] ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 20 (level, low) -> IRQ 16 [ 23.413811] VP_IDE: chipset revision 6 [ 23.413918] VP_IDE: not 100% native mode: will probe irqs later [ 23.415129] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.0 [ 23.415302] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio [ 23.415575] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio [ 23.415843] Probing IDE interface ide0... [ 23.828683] hda: SAMSUNG SP2014N, ATA DISK drive [ 24.499610] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 24.499885] Probing IDE interface ide1... [ 25.361806] hdc: TSSTcorpCD/DVDW TS-H552B, ATAPI CD/DVD-ROM drive [ 26.032779] ide1 at 0x170-0x177,0x376 on irq 15 [ 26.033380] hda: max request size: 512KiB [ 26.039066] hda: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(133) [ 26.039633] hda: cache flushes supported [ 26.039833] hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 > [ 26.094517] usbcore: registered new interface driver libusual [ 26.094687] usbcore: registered new interface driver hiddev [ 26.094873] usbcore: registered new interface driver usbhid [ 26.094987] /home/ka/q/kernel/linux-2.6./20/rc6-rt6-kw/drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 26.095337] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 26.096013] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 26.096253] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 26.096546] mice: PS/2 mouse device common for all mice [ 26.117810] input: AT Translated Set 2 keyboard as /class/input/input0 [ 26.152373] TCP bic registered [ 26.152479] Initializing XFRM netlink socket [ 26.152616] NET: Registered protocol family 1 [ 26.152731] NET: Registered protocol family 17 [ 26.152856] Using IPI Shortcut mode [ 26.153070] ACPI: (supports S0 S1 S3 S4 S5) [ 26.153551] ***************************************************************************** [ 26.153720] * * [ 26.153889] * REMINDER, the following debugging options are turned on in your .config: * [ 26.154056] * * [ 26.154222] * CONFIG_CRITICAL_PREEMPT_TIMING * [ 26.154389] * CONFIG_CRITICAL_IRQSOFF_TIMING * [ 26.154556] * CONFIG_FUNCTION_TRACE * [ 26.154750] * CONFIG_LOCKDEP * [ 26.154917] * * [ 26.155084] * they may increase runtime overhead and latencies. * [ 26.155253] * * [ 26.155423] ***************************************************************************** [ 26.155736] Freeing unused kernel memory: 200k freed [ 26.155912] Write protecting the kernel read-only data: 766k [ 26.156215] Time: tsc clocksource has been installed. [ 26.302780] logips2pp: Detected unknown logitech mouse model 62 [ 26.430080] USB Universal Host Controller Interface driver v3.0 [ 26.430306] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 17 [ 26.430531] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 26.430870] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 [ 26.431231] uhci_hcd 0000:00:10.0: irq 17, io base 0x0000dc00 [ 26.431686] usb usb1: configuration #1 chosen from 1 choice [ 26.431965] hub 1-0:1.0: USB hub found [ 26.432100] hub 1-0:1.0: 2 ports detected [ 26.535831] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 17 [ 26.536050] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 26.536243] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 [ 26.536429] uhci_hcd 0000:00:10.1: irq 17, io base 0x0000e000 [ 26.536755] usb usb2: configuration #1 chosen from 1 choice [ 26.536928] hub 2-0:1.0: USB hub found [ 26.537047] hub 2-0:1.0: 2 ports detected [ 26.639490] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 17 [ 26.639711] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 26.639900] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 [ 26.640086] uhci_hcd 0000:00:10.2: irq 17, io base 0x0000e400 [ 26.640432] usb usb3: configuration #1 chosen from 1 choice [ 26.640626] hub 3-0:1.0: USB hub found [ 26.640743] hub 3-0:1.0: 2 ports detected [ 26.655296] Switched to high resolution mode on CPU 0 [ 26.743156] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 17 [ 26.743379] uhci_hcd 0000:00:10.3: UHCI Host Controller [ 26.743547] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 [ 26.743735] uhci_hcd 0000:00:10.3: irq 17, io base 0x0000e800 [ 26.744088] usb usb4: configuration #1 chosen from 1 choice [ 26.744283] hub 4-0:1.0: USB hub found [ 26.744400] hub 4-0:1.0: 2 ports detected [ 26.813898] input: ImExPS/2 Logitech Explorer Mouse as /class/input/input1 [ 26.848563] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 17 [ 26.848791] ehci_hcd 0000:00:10.4: EHCI Host Controller [ 26.848981] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5 [ 26.849197] ehci_hcd 0000:00:10.4: irq 17, io mem 0xcffffd00 [ 26.849314] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 26.849665] usb usb5: configuration #1 chosen from 1 choice [ 26.849827] hub 5-0:1.0: USB hub found [ 26.849997] hub 5-0:1.0: 8 ports detected [ 27.158838] kjournald starting. Commit interval 5 seconds [ 27.158996] EXT3-fs: mounted filesystem with ordered data mode. [ 35.835033] hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) [ 35.835051] Uniform CD-ROM driver Revision: 3.20 [ 35.861074] r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded [ 35.861104] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 16 (level, low) -> IRQ 18 [ 35.861291] eth0: RTL8169s/8110s at 0xf8806f00, 00:11:09:d9:97:b2, IRQ 18 [ 35.890001] parport: PnPBIOS parport detected. [ 35.890219] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP] [ 36.157882] nvidia: module license 'NVIDIA' taints kernel. [ 36.409188] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 18 [ 36.409420] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-9631 Thu Nov 9 17:38:10 PST 2006 [ 36.467844] input: PC Speaker as /class/input/input2 [ 36.985986] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 19 [ 36.986172] PCI: Setting latency timer of device 0000:00:11.5 to 64 [ 41.535760] floppy0: no floppy controllers found [ 41.562057] lp0: using parport0 (interrupt-driven). [ 41.828480] input: Power Button (FF) as /class/input/input3 [ 41.841452] ACPI: Power Button (FF) [PWRF] [ 41.852224] input: Power Button (CM) as /class/input/input4 [ 41.865199] ACPI: Power Button (CM) [PWRB] [ 41.875937] input: Sleep Button (CM) as /class/input/input5 [ 41.888682] ACPI: Sleep Button (CM) [SLPB] [ 41.901162] No dock devices found. [ 41.912664] ibm_acpi: ec object not found [ 42.520611] EXT3 FS on hda3, internal journal [ 42.644071] kjournald starting. Commit interval 5 seconds [ 42.644272] EXT3 FS on hda5, internal journal [ 42.644280] EXT3-fs: mounted filesystem with ordered data mode. [ 42.647271] kjournald starting. Commit interval 5 seconds [ 42.647418] EXT3 FS on hda2, internal journal [ 42.647425] EXT3-fs: mounted filesystem with ordered data mode. [ 43.274376] Adding 1464836k swap on /dev/hda6. Priority:-1 extents:1 across:1464836k [ 43.686588] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (version 2.00.00) [ 43.690186] powernow-k8: 0 : fid 0x2 (1000 MHz), vid 0x12 [ 43.690190] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x8 [ 43.690195] powernow-k8: 2 : fid 0xc (2000 MHz), vid 0x6 [ 89.323447] Time: acpi_pm clocksource has been installed. [ 89.822999] Clocksource tsc unstable (delta = -250051675 ns) [ 107.147024] Stopping tasks ... done. [ 107.217374] Shrinking memory... -done (0 pages freed) [ 107.240775] Freed 0 kbytes in 0.02 seconds (0.00 MB/s) [ 107.240783] Suspending console(s) [ 108.145319] pnp: Device 00:02 disabled. [ 108.145818] pnp: Device 00:01 disabled. [ 108.146724] ACPI: PCI interrupt for device 0000:00:11.5 disabled [ 108.160786] ACPI: PCI interrupt for device 0000:00:10.4 disabled [ 108.176729] ACPI: PCI interrupt for device 0000:00:10.3 disabled [ 108.192712] ACPI: PCI interrupt for device 0000:00:10.2 disabled [ 108.208696] ACPI: PCI interrupt for device 0000:00:10.1 disabled [ 108.224680] ACPI: PCI interrupt for device 0000:00:10.0 disabled [ 108.241268] lapic suspend on CPU#0 [ 108.241274] [<c01040fa>] show_trace_log_lvl+0x35/0x54 [ 108.241289] [<c010477c>] show_trace+0x2c/0x2e [ 108.241299] [<c0104843>] dump_stack+0x29/0x2b [ 108.241309] [<c011015b>] lapic_suspend+0xcf/0xf8 [ 108.241319] [<c026cf0d>] sysdev_suspend+0xad/0x216 [ 108.241331] [<c0271563>] device_power_down+0xb5/0xe2 [ 108.241340] [<c0142e5a>] swsusp_suspend+0x1e/0x6e [ 108.241351] [<c014354a>] pm_suspend_disk+0x97/0x14d [ 108.241361] [<c01422c8>] enter_state+0x58/0x161 [ 108.241371] [<c0142461>] state_store+0x90/0xa5 [ 108.241380] [<c01b3891>] subsys_attr_store+0x33/0x35 [ 108.241392] [<c01b3b74>] sysfs_write_file+0xba/0xdb [ 108.241402] [<c01761b4>] vfs_write+0xce/0x1a6 [ 108.241412] [<c0176815>] sys_write+0x4c/0x70 [ 108.241421] [<c01030d7>] sysenter_past_esp+0x6c/0xad [ 108.241430] ======================= [ 108.241446] swsusp: critical section: [ 108.264597] swsusp: Need to copy 16708 pages [ 57.589976] Intel machine check architecture supported. [ 57.589989] Intel machine check reporting enabled on CPU#0. [ 28.767086] lapic resume on CPU#0 [ 28.767089] [<c01040fa>] show_trace_log_lvl+0x35/0x54 [ 28.767097] [<c010477c>] show_trace+0x2c/0x2e [ 28.767102] [<c0104843>] dump_stack+0x29/0x2b [ 28.767107] [<c01101b8>] lapic_resume+0x34/0x1af [ 28.767113] [<c026ca46>] __sysdev_resume+0x20/0x66 [ 28.767119] [<c026d098>] sysdev_resume+0x22/0x5e [ 28.767124] [<c027187b>] device_power_up+0xd/0x14 [ 28.767129] [<c0142e9d>] swsusp_suspend+0x61/0x6e [ 28.767134] [<c014354a>] pm_suspend_disk+0x97/0x14d [ 28.767140] [<c01422c8>] enter_state+0x58/0x161 [ 28.767144] [<c0142461>] state_store+0x90/0xa5 [ 28.767149] [<c01b3891>] subsys_attr_store+0x33/0x35 [ 28.767155] [<c01b3b74>] sysfs_write_file+0xba/0xdb [ 28.767161] [<c01761b4>] vfs_write+0xce/0x1a6 [ 28.767166] [<c0176815>] sys_write+0x4c/0x70 [ 28.767170] [<c01030d7>] sysenter_past_esp+0x6c/0xad [ 28.767175] ======================= [ 96.970169] pci 0000:00:00.0: EARLY resume [ 96.970173] pci 0000:00:00.1: EARLY resume [ 96.970176] pci 0000:00:00.2: EARLY resume [ 96.970180] pci 0000:00:00.3: EARLY resume [ 96.970183] pci 0000:00:00.4: EARLY resume [ 96.970186] pci 0000:00:00.7: EARLY resume [ 96.970189] pci 0000:00:01.0: EARLY resume [ 96.970192] r8169 0000:00:0b.0: EARLY resume [ 96.970196] VIA_IDE 0000:00:0f.0: EARLY resume [ 96.970199] uhci_hcd 0000:00:10.0: EARLY resume [ 96.970203] uhci_hcd 0000:00:10.1: EARLY resume [ 96.970206] uhci_hcd 0000:00:10.2: EARLY resume [ 96.970209] uhci_hcd 0000:00:10.3: EARLY resume [ 96.970213] ehci_hcd 0000:00:10.4: EARLY resume [ 96.970216] pci 0000:00:11.0: EARLY resume [ 96.970222] PCI: MSI-K8T-Neo2Fir, attempting to turn soundcard ON [ 96.970228] PCI: MSI-K8T-Neo2Fir, soundcard on [ 96.970233] VIA 82xx Audio 0000:00:11.5: EARLY resume [ 96.970236] pci 0000:00:18.0: EARLY resume [ 96.970240] pci 0000:00:18.1: EARLY resume [ 96.970243] pci 0000:00:18.2: EARLY resume [ 96.970246] k8temp 0000:00:18.3: EARLY resume [ 96.970250] nvidia 0000:01:00.0: EARLY resume [ 96.970254] pcspkr pcspkr: EARLY resume [ 96.970257] platform vesafb.0: EARLY resume [ 96.970264] serial8250 serial8250: EARLY resume [ 96.970268] i8042 i8042: EARLY resume [ 96.978026] acpi acpi: resuming [ 96.978035] pci 0000:00:00.0: resuming [ 96.978081] pci 0000:00:00.1: resuming [ 96.978104] pci 0000:00:00.2: resuming [ 96.978126] pci 0000:00:00.3: resuming [ 96.978149] pci 0000:00:00.4: resuming [ 96.978171] pci 0000:00:00.7: resuming [ 96.978194] pci 0000:00:01.0: resuming [ 96.978237] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 96.978242] r8169 0000:00:0b.0: resuming [ 96.978246] VIA_IDE 0000:00:0f.0: resuming [ 96.978293] ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 20 (level, low) -> IRQ 16 [ 96.978300] uhci_hcd 0000:00:10.0: resuming [ 96.989807] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 17 [ 96.989862] usb usb1: root hub lost power or was reset [ 96.989875] uhci_hcd 0000:00:10.1: resuming [ 97.005774] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 17 [ 97.005827] usb usb2: root hub lost power or was reset [ 97.005839] uhci_hcd 0000:00:10.2: resuming [ 97.021742] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 17 [ 97.021795] usb usb3: root hub lost power or was reset [ 97.021807] uhci_hcd 0000:00:10.3: resuming [ 97.037710] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 17 [ 97.037763] usb usb4: root hub lost power or was reset [ 97.037776] ehci_hcd 0000:00:10.4: resuming [ 97.053679] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 17 [ 97.053719] usb usb5: root hub lost power or was reset [ 97.053735] pci 0000:00:11.0: resuming [ 97.053770] VIA 82xx Audio 0000:00:11.5: resuming [ 97.069678] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 19 [ 97.069687] PCI: Setting latency timer of device 0000:00:11.5 to 64 [ 97.072809] pci 0000:00:18.0: resuming [ 97.072825] pci 0000:00:18.1: resuming [ 97.072837] pci 0000:00:18.2: resuming [ 97.072850] k8temp 0000:00:18.3: resuming [ 97.072863] nvidia 0000:01:00.0: resuming [ 97.073007] pnp 00:00: resuming [ 97.073014] serial 00:01: resuming [ 97.074378] pnp: Device 00:01 activated. [ 97.074384] parport_pc 00:02: resuming [ 97.076025] pnp: Device 00:02 activated. [ 97.076029] system 00:03: resuming [ 97.076032] pnp 00:04: resuming [ 97.076034] pnp 00:05: resuming [ 97.076037] pnp 00:06: resuming [ 97.076040] pnp 00:07: resuming [ 97.076043] i8042 aux 00:08: resuming [ 97.076181] pnp: Failed to activate device 00:08. [ 97.076185] i8042 kbd 00:09: resuming [ 97.076199] pnp: Failed to activate device 00:09. [ 97.076208] pcspkr pcspkr: resuming [ 97.076212] platform vesafb.0: resuming [ 97.076250] serial8250 serial8250: resuming [ 97.076257] ide-disk 0.0: resuming [ 97.129427] ide-cdrom 1.0: resuming [ 97.131585] i8042 i8042: resuming [ 97.131618] atkbd serio0: resuming [ 97.164790] psmouse serio1: resuming [ 97.345198] logips2pp: Detected unknown logitech mouse model 62 [ 97.848637] usb usb1: resuming [ 97.888028] hub 1-0:1.0: resuming [ 97.888032] usb usb2: resuming [ 196.047736] hub 2-0:1.0: resuming [ 196.047743] usb usb3: resuming [ 196.087517] hub 3-0:1.0: resuming [ 196.087524] usb usb4: resuming [ 196.127477] hub 4-0:1.0: resuming [ 196.127484] usb usb5: resuming [ 196.159445] hub 5-0:1.0: resuming [ 196.159464] ac97 0-0:ALC850: resuming [ 196.159515] Restarting tasks ... done. [ 286.477196] dbs_check_cpu: t310 < i311 [ 368.901522] uhci_hcd 0000:00:10.3: remove, state 1 [ 368.901534] usb usb4: USB disconnect, address 1 [ 368.905100] uhci_hcd 0000:00:10.3: USB bus 4 deregistered [ 368.906081] ACPI: PCI interrupt for device 0000:00:10.3 disabled [ 368.906109] uhci_hcd 0000:00:10.2: remove, state 1 [ 368.906119] usb usb3: USB disconnect, address 1 [ 368.909638] uhci_hcd 0000:00:10.2: USB bus 3 deregistered [ 368.910592] ACPI: PCI interrupt for device 0000:00:10.2 disabled [ 368.910620] uhci_hcd 0000:00:10.1: remove, state 1 [ 368.910629] usb usb2: USB disconnect, address 1 [ 368.914235] uhci_hcd 0000:00:10.1: USB bus 2 deregistered [ 368.914334] ACPI: PCI interrupt for device 0000:00:10.1 disabled [ 368.914361] uhci_hcd 0000:00:10.0: remove, state 1 [ 368.914369] usb usb1: USB disconnect, address 1 [ 368.915250] uhci_hcd 0000:00:10.0: USB bus 1 deregistered [ 368.915333] ACPI: PCI interrupt for device 0000:00:10.0 disabled [ 416.880815] r8169: eth0: link up [ 227.932433] Stopping tasks ... done. [ 227.933330] Shrinking memory... -done (0 pages freed) [ 227.949058] Freed 0 kbytes in 0.01 seconds (0.00 MB/s) [ 227.949063] Suspending console(s) [ 228.840372] pnp: Device 00:02 disabled. [ 228.840626] pnp: Device 00:01 disabled. [ 228.841385] ACPI: PCI interrupt for device 0000:00:11.5 disabled [ 228.854045] ACPI: PCI interrupt for device 0000:00:10.4 disabled [ 228.886441] lapic suspend on CPU#0 [ 228.886445] [<c01040fa>] show_trace_log_lvl+0x35/0x54 [ 228.886453] [<c010477c>] show_trace+0x2c/0x2e [ 228.886458] [<c0104843>] dump_stack+0x29/0x2b [ 228.886463] [<c011015b>] lapic_suspend+0xcf/0xf8 [ 228.886469] [<c026cf0d>] sysdev_suspend+0xad/0x216 [ 228.886474] [<c0271563>] device_power_down+0xb5/0xe2 [ 228.886480] [<c0142e5a>] swsusp_suspend+0x1e/0x6e [ 228.886485] [<c014354a>] pm_suspend_disk+0x97/0x14d [ 228.886490] [<c01422c8>] enter_state+0x58/0x161 [ 228.886495] [<c0142461>] state_store+0x90/0xa5 [ 228.886499] [<c01b3891>] subsys_attr_store+0x33/0x35 [ 228.886505] [<c01b3b74>] sysfs_write_file+0xba/0xdb [ 228.886511] [<c01761b4>] vfs_write+0xce/0x1a6 [ 228.886516] [<c0176815>] sys_write+0x4c/0x70 [ 228.886520] [<c01030d7>] sysenter_past_esp+0x6c/0xad [ 228.886525] ======================= [ 228.886536] swsusp: critical section: [ 228.902253] swsusp: Need to copy 19089 pages [ 28.574318] Intel machine check architecture supported. [ 28.574325] Intel machine check reporting enabled on CPU#0. [ 28.574561] lapic resume on CPU#0 [ 28.574565] [<c01040fa>] show_trace_log_lvl+0x35/0x54 [ 28.574573] [<c010477c>] show_trace+0x2c/0x2e [ 28.574578] [<c0104843>] dump_stack+0x29/0x2b [ 28.574583] [<c01101b8>] lapic_resume+0x34/0x1af [ 28.574589] [<c026ca46>] __sysdev_resume+0x20/0x66 [ 28.574595] [<c026d098>] sysdev_resume+0x22/0x5e [ 28.574600] [<c027187b>] device_power_up+0xd/0x14 [ 28.574605] [<c0142e9d>] swsusp_suspend+0x61/0x6e [ 28.574610] [<c014354a>] pm_suspend_disk+0x97/0x14d [ 28.574615] [<c01422c8>] enter_state+0x58/0x161 [ 28.574620] [<c0142461>] state_store+0x90/0xa5 [ 28.574625] [<c01b3891>] subsys_attr_store+0x33/0x35 [ 28.574631] [<c01b3b74>] sysfs_write_file+0xba/0xdb [ 28.574637] [<c01761b4>] vfs_write+0xce/0x1a6 [ 28.574642] [<c0176815>] sys_write+0x4c/0x70 [ 28.574647] [<c01030d7>] sysenter_past_esp+0x6c/0xad [ 28.574651] ======================= [ 90.251248] pci 0000:00:00.0: EARLY resume [ 90.251252] pci 0000:00:00.1: EARLY resume [ 90.251255] pci 0000:00:00.2: EARLY resume [ 90.251258] pci 0000:00:00.3: EARLY resume [ 90.251261] pci 0000:00:00.4: EARLY resume [ 90.251265] pci 0000:00:00.7: EARLY resume [ 90.251268] pci 0000:00:01.0: EARLY resume [ 90.251271] r8169 0000:00:0b.0: EARLY resume [ 90.251274] VIA_IDE 0000:00:0f.0: EARLY resume [ 90.251278] pci 0000:00:10.0: EARLY resume [ 90.251281] pci 0000:00:10.1: EARLY resume [ 90.251284] pci 0000:00:10.2: EARLY resume [ 90.251287] pci 0000:00:10.3: EARLY resume [ 90.251291] ehci_hcd 0000:00:10.4: EARLY resume [ 90.251294] pci 0000:00:11.0: EARLY resume [ 90.251300] PCI: MSI-K8T-Neo2Fir, attempting to turn soundcard ON [ 90.251306] PCI: MSI-K8T-Neo2Fir, soundcard on [ 90.251311] VIA 82xx Audio 0000:00:11.5: EARLY resume [ 90.251315] pci 0000:00:18.0: EARLY resume [ 90.251318] pci 0000:00:18.1: EARLY resume [ 90.251321] pci 0000:00:18.2: EARLY resume [ 90.251324] k8temp 0000:00:18.3: EARLY resume [ 90.251328] nvidia 0000:01:00.0: EARLY resume [ 90.251332] pcspkr pcspkr: EARLY resume [ 90.251335] platform vesafb.0: EARLY resume [ 90.251342] serial8250 serial8250: EARLY resume [ 90.251346] i8042 i8042: EARLY resume [ 90.259839] acpi acpi: resuming [ 90.259848] pci 0000:00:00.0: resuming [ 90.259899] pci 0000:00:00.1: resuming [ 90.259922] pci 0000:00:00.2: resuming [ 90.259944] pci 0000:00:00.3: resuming [ 90.259967] pci 0000:00:00.4: resuming [ 90.259989] pci 0000:00:00.7: resuming [ 90.260012] pci 0000:00:01.0: resuming [ 90.260054] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 90.260060] r8169 0000:00:0b.0: resuming [ 90.271012] VIA_IDE 0000:00:0f.0: resuming [ 90.271061] ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 20 (level, low) -> IRQ 16 [ 90.271067] pci 0000:00:10.0: resuming [ 90.271094] PM: Writing back config space on device 0000:00:10.0 at offset 1 (was 2100017, writing 2100013) [ 90.271107] pci 0000:00:10.1: resuming [ 90.271134] PM: Writing back config space on device 0000:00:10.1 at offset 1 (was 2100017, writing 2100013) [ 90.271147] pci 0000:00:10.2: resuming [ 90.271173] PM: Writing back config space on device 0000:00:10.2 at offset 1 (was 2100017, writing 2100013) [ 90.271186] pci 0000:00:10.3: resuming [ 90.271212] PM: Writing back config space on device 0000:00:10.3 at offset 1 (was 2100017, writing 2100013) [ 90.271225] ehci_hcd 0000:00:10.4: resuming [ 90.286985] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 17 [ 90.287026] usb usb5: root hub lost power or was reset [ 90.287043] pci 0000:00:11.0: resuming [ 90.287078] VIA 82xx Audio 0000:00:11.5: resuming [ 90.302943] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 19 [ 90.302953] PCI: Setting latency timer of device 0000:00:11.5 to 64 [ 90.306052] pci 0000:00:18.0: resuming [ 90.306068] pci 0000:00:18.1: resuming [ 90.306080] pci 0000:00:18.2: resuming [ 90.306093] k8temp 0000:00:18.3: resuming [ 90.306106] nvidia 0000:01:00.0: resuming [ 90.306245] pnp 00:00: resuming [ 90.306251] serial 00:01: resuming [ 90.307641] pnp: Device 00:01 activated. [ 90.307647] parport_pc 00:02: resuming [ 90.309271] pnp: Device 00:02 activated. [ 90.309275] system 00:03: resuming [ 90.309278] pnp 00:04: resuming [ 90.309281] pnp 00:05: resuming [ 90.309284] pnp 00:06: resuming [ 90.309287] pnp 00:07: resuming [ 90.309290] i8042 aux 00:08: resuming [ 90.309426] pnp: Failed to activate device 00:08. [ 90.309430] i8042 kbd 00:09: resuming [ 90.309445] pnp: Failed to activate device 00:09. [ 90.309454] pcspkr pcspkr: resuming [ 90.309457] platform vesafb.0: resuming [ 90.309496] serial8250 serial8250: resuming [ 90.309503] ide-disk 0.0: resuming [ 90.356307] ide-cdrom 1.0: resuming [ 90.358458] i8042 i8042: resuming [ 90.358491] atkbd serio0: resuming [ 90.391693] psmouse serio1: resuming [ 90.573192] logips2pp: Detected unknown logitech mouse model 62 [ 91.075384] usb usb5: resuming [ 91.105324] hub 5-0:1.0: resuming [ 91.105334] ac97 0-0:ALC850: resuming [ 91.764195] Restarting tasks ... done. [ 184.374518] input: Power Button (FF) as /class/input/input6 [ 184.380803] ACPI: Power Button (FF) [PWRF] [ 184.401383] input: Power Button (CM) as /class/input/input7 [ 184.426364] ACPI: Power Button (CM) [PWRB] [ 184.427403] input: Sleep Button (CM) as /class/input/input8 [ 184.447937] ACPI: Sleep Button (CM) [SLPB] [ 405.243424] Stopping tasks ... done. [ 405.244559] Shrinking memory... -done (0 pages freed) [ 405.267891] Freed 0 kbytes in 0.02 seconds (0.00 MB/s) [ 405.267899] Suspending console(s) [ 406.076633] pnp: Device 00:02 disabled. [ 406.077139] pnp: Device 00:01 disabled. [ 406.078087] ACPI: PCI interrupt for device 0000:00:11.5 disabled [ 406.089520] ACPI: PCI interrupt for device 0000:00:10.4 disabled [ 406.121988] lapic suspend on CPU#0 [ 406.121995] [<c01040fa>] show_trace_log_lvl+0x35/0x54 [ 406.122009] [<c010477c>] show_trace+0x2c/0x2e [ 406.122019] [<c0104843>] dump_stack+0x29/0x2b [ 406.122029] [<c011015b>] lapic_suspend+0xcf/0xf8 [ 406.122040] [<c026cf0d>] sysdev_suspend+0xad/0x216 [ 406.122051] [<c0271563>] device_power_down+0xb5/0xe2 [ 406.122060] [<c0142e5a>] swsusp_suspend+0x1e/0x6e [ 406.122071] [<c014354a>] pm_suspend_disk+0x97/0x14d [ 406.122081] [<c01422c8>] enter_state+0x58/0x161 [ 406.122090] [<c0142461>] state_store+0x90/0xa5 [ 406.122099] [<c01b3891>] subsys_attr_store+0x33/0x35 [ 406.122111] [<c01b3b74>] sysfs_write_file+0xba/0xdb [ 406.122121] [<c01761b4>] vfs_write+0xce/0x1a6 [ 406.122131] [<c0176815>] sys_write+0x4c/0x70 [ 406.122140] [<c01030d7>] sysenter_past_esp+0x6c/0xad [ 406.122149] ======================= [ 406.122164] swsusp: critical section: [ 406.145294] swsusp: Need to copy 19231 pages [ 58.244141] Intel machine check architecture supported. [ 58.244155] Intel machine check reporting enabled on CPU#0. [ 29.093849] lapic resume on CPU#0 [ 29.093853] [<c01040fa>] show_trace_log_lvl+0x35/0x54 [ 29.093861] [<c010477c>] show_trace+0x2c/0x2e [ 29.093865] [<c0104843>] dump_stack+0x29/0x2b [ 29.093870] [<c01101b8>] lapic_resume+0x34/0x1af [ 29.093876] [<c026ca46>] __sysdev_resume+0x20/0x66 [ 29.093882] [<c026d098>] sysdev_resume+0x22/0x5e [ 29.093887] [<c027187b>] device_power_up+0xd/0x14 [ 29.093892] [<c0142e9d>] swsusp_suspend+0x61/0x6e [ 29.093897] [<c014354a>] pm_suspend_disk+0x97/0x14d [ 29.093902] [<c01422c8>] enter_state+0x58/0x161 [ 29.093907] [<c0142461>] state_store+0x90/0xa5 [ 29.093912] [<c01b3891>] subsys_attr_store+0x33/0x35 [ 29.093918] [<c01b3b74>] sysfs_write_file+0xba/0xdb [ 29.093923] [<c01761b4>] vfs_write+0xce/0x1a6 [ 29.093928] [<c0176815>] sys_write+0x4c/0x70 [ 29.093933] [<c01030d7>] sysenter_past_esp+0x6c/0xad [ 29.093937] ======================= [ 65.934039] pci 0000:00:00.0: EARLY resume [ 65.934044] pci 0000:00:00.1: EARLY resume [ 65.934047] pci 0000:00:00.2: EARLY resume [ 65.934050] pci 0000:00:00.3: EARLY resume [ 65.934053] pci 0000:00:00.4: EARLY resume [ 65.934056] pci 0000:00:00.7: EARLY resume [ 65.934059] pci 0000:00:01.0: EARLY resume [ 65.934063] r8169 0000:00:0b.0: EARLY resume [ 65.934066] VIA_IDE 0000:00:0f.0: EARLY resume [ 65.934069] pci 0000:00:10.0: EARLY resume [ 65.934073] pci 0000:00:10.1: EARLY resume [ 65.934076] pci 0000:00:10.2: EARLY resume [ 65.934079] pci 0000:00:10.3: EARLY resume [ 65.934082] ehci_hcd 0000:00:10.4: EARLY resume [ 65.934086] pci 0000:00:11.0: EARLY resume [ 65.934091] PCI: MSI-K8T-Neo2Fir, attempting to turn soundcard ON [ 65.934097] PCI: MSI-K8T-Neo2Fir, soundcard on [ 65.934102] VIA 82xx Audio 0000:00:11.5: EARLY resume [ 65.934106] pci 0000:00:18.0: EARLY resume [ 65.934109] pci 0000:00:18.1: EARLY resume [ 65.934112] pci 0000:00:18.2: EARLY resume [ 65.934115] k8temp 0000:00:18.3: EARLY resume [ 65.934119] nvidia 0000:01:00.0: EARLY resume [ 65.934124] pcspkr pcspkr: EARLY resume [ 65.934127] platform vesafb.0: EARLY resume [ 65.934134] serial8250 serial8250: EARLY resume [ 65.934137] i8042 i8042: EARLY resume [ 65.942628] acpi acpi: resuming [ 65.942638] pci 0000:00:00.0: resuming [ 65.942685] pci 0000:00:00.1: resuming [ 65.942708] pci 0000:00:00.2: resuming [ 65.942731] pci 0000:00:00.3: resuming [ 65.942753] pci 0000:00:00.4: resuming [ 65.942776] pci 0000:00:00.7: resuming [ 65.942798] pci 0000:00:01.0: resuming [ 65.942841] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 65.942846] r8169 0000:00:0b.0: resuming [ 65.952005] VIA_IDE 0000:00:0f.0: resuming [ 65.952054] ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 20 (level, low) -> IRQ 16 [ 65.952060] pci 0000:00:10.0: resuming [ 65.952087] PM: Writing back config space on device 0000:00:10.0 at offset 1 (was 2100017, writing 2100013) [ 65.952101] pci 0000:00:10.1: resuming [ 65.952127] PM: Writing back config space on device 0000:00:10.1 at offset 1 (was 2100017, writing 2100013) [ 65.952140] pci 0000:00:10.2: resuming [ 65.952166] PM: Writing back config space on device 0000:00:10.2 at offset 1 (was 2100017, writing 2100013) [ 65.952179] pci 0000:00:10.3: resuming [ 65.952206] PM: Writing back config space on device 0000:00:10.3 at offset 1 (was 2100017, writing 2100013) [ 65.952219] ehci_hcd 0000:00:10.4: resuming [ 65.967977] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 17 [ 65.968017] usb usb5: root hub lost power or was reset [ 65.968034] pci 0000:00:11.0: resuming [ 65.968068] VIA 82xx Audio 0000:00:11.5: resuming [ 65.983936] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 19 [ 65.983945] PCI: Setting latency timer of device 0000:00:11.5 to 64 [ 65.987043] pci 0000:00:18.0: resuming [ 65.987058] pci 0000:00:18.1: resuming [ 65.987071] pci 0000:00:18.2: resuming [ 65.987084] k8temp 0000:00:18.3: resuming [ 65.987097] nvidia 0000:01:00.0: resuming [ 65.987237] pnp 00:00: resuming [ 65.987244] serial 00:01: resuming [ 65.988604] pnp: Device 00:01 activated. [ 65.988610] parport_pc 00:02: resuming [ 65.990224] pnp: Device 00:02 activated. [ 65.990227] system 00:03: resuming [ 65.990230] pnp 00:04: resuming [ 65.990233] pnp 00:05: resuming [ 65.990236] pnp 00:06: resuming [ 65.990239] pnp 00:07: resuming [ 65.990242] i8042 aux 00:08: resuming [ 65.990379] pnp: Failed to activate device 00:08. [ 65.990383] i8042 kbd 00:09: resuming [ 65.990398] pnp: Failed to activate device 00:09. [ 65.990407] pcspkr pcspkr: resuming [ 65.990410] platform vesafb.0: resuming [ 65.990449] serial8250 serial8250: resuming [ 65.990456] ide-disk 0.0: resuming [ 66.040883] ide-cdrom 1.0: resuming [ 66.043032] i8042 i8042: resuming [ 66.043065] atkbd serio0: resuming [ 66.075682] psmouse serio1: resuming [ 66.253841] logips2pp: Detected unknown logitech mouse model 62 [ 133.359431] usb usb5: resuming [ 133.391673] hub 5-0:1.0: resuming [ 133.391692] ac97 0-0:ALC850: resuming [ 133.391739] Restarting tasks ... done.
Quoted 2 lines · Karsten Wiese
Serial port console is off here and the jiffies update fix doesn't make a noticeable difference.
ok, this eliminates my serial port theory.
and this means i'm having trouble reproducing this problem locally. Maybe i tried it the wrong way: does it only occur with suspend-to-disk, or suspend-to-ram too? Does it need ACPI suspend-to-disk, or software-suspend?
Ingo
Am Donnerstag, 1. Februar 2007 09:01 schrieb Ingo Molnar:
Quoted 5 lines
and this means i'm having trouble reproducing this problem locally. Maybe i tried it the wrong way: does it only occur with suspend-to-disk, or suspend-to-ram too? Does it need ACPI suspend-to-disk, or software-suspend?
Haven't checked suspend-to-ram.
I use pm-hibernate or
"echo reboot > /sys/power/disk; echo disk > /sys/power/state". Thats software-suspend?
I think the wait is caused by an interrupt starting somewhere under sysdev_resume(void).
possibly lapic timer interrupt? Will try to trace that. 2.6.20-rc6-rt6 .config attached.
Machine is AMD64 UP, VIA chipset desktop.
Karsten
#
# Automatically generated make config: don't edit # Linux kernel version: 2.6.20-rc6-rt6
# Thu Feb 1 00:25:31 2007
#CONFIG_X86_32=yCONFIG_GENERIC_TIME=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=yCONFIG_X86=yCONFIG_MMU=yCONFIG_GENERIC_ISA_DMA=yCONFIG_GENERIC_IOMAP=yCONFIG_GENERIC_BUG=yCONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=yCONFIG_DMI=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#CONFIG_EXPERIMENTAL=yCONFIG_BROKEN_ON_SMP=yCONFIG_LOCK_KERNEL=yCONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#CONFIG_LOCALVERSION=".dbg"
# CONFIG_LOCALVERSION_AUTO is not setCONFIG_SWAP=yCONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not setCONFIG_POSIX_MQUEUE=yCONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not setCONFIG_TASKSTATS=yCONFIG_TASK_DELAY_ACCT=y
# CONFIG_UTS_NS is not setCONFIG_AUDIT=yCONFIG_AUDITSYSCALL=y
# CONFIG_IKCONFIG is not set
# CONFIG_SYSFS_DEPRECATED is not setCONFIG_RELAY=yCONFIG_INITRAMFS_SOURCE=""CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_TASK_XACCT is not setCONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not setCONFIG_UID16=yCONFIG_SYSCTL_SYSCALL=yCONFIG_KALLSYMS=yCONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not setCONFIG_HOTPLUG=yCONFIG_PRINTK=yCONFIG_BUG=yCONFIG_ELF_CORE=yCONFIG_BASE_FULL=yCONFIG_FUTEX=yCONFIG_EPOLL=yCONFIG_SHMEM=yCONFIG_SLAB=yCONFIG_VM_EVENT_COUNTERS=yCONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not setCONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#CONFIG_MODULES=yCONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not setCONFIG_MODVERSIONS=yCONFIG_MODULE_SRCVERSION_ALL=yCONFIG_KMOD=y
#
# Block layer
#CONFIG_BLOCK=yCONFIG_LBD=yCONFIG_BLK_DEV_IO_TRACE=yCONFIG_LSF=y
#
# IO Schedulers
#CONFIG_IOSCHED_NOOP=yCONFIG_IOSCHED_AS=yCONFIG_IOSCHED_DEADLINE=yCONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not setCONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not setCONFIG_DEFAULT_IOSCHED="cfq"
#
# Processor type and features
#CONFIG_TICK_ONESHOT=yCONFIG_NO_HZ=yCONFIG_HIGH_RES_TIMERS=y
# CONFIG_SMP is not setCONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_PARAVIRT is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MCORE2 is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not setCONFIG_MK8=y
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not setCONFIG_X86_CMPXCHG=yCONFIG_X86_XADD=yCONFIG_X86_L1_CACHE_SHIFT=6CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not setCONFIG_GENERIC_CALIBRATE_DELAY=yCONFIG_X86_WP_WORKS_OK=yCONFIG_X86_INVLPG=yCONFIG_X86_BSWAP=yCONFIG_X86_POPAD_OK=yCONFIG_X86_CMPXCHG64=yCONFIG_X86_GOOD_APIC=yCONFIG_X86_INTEL_USERCOPY=yCONFIG_X86_USE_PPRO_CHECKSUM=yCONFIG_X86_TSC=yCONFIG_HPET_TIMER=yCONFIG_HPET_EMULATE_RTC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT_DESKTOP is not setCONFIG_PREEMPT_RT=yCONFIG_PREEMPT=yCONFIG_PREEMPT_SOFTIRQS=yCONFIG_PREEMPT_HARDIRQS=yCONFIG_PREEMPT_BKL=y
# CONFIG_CLASSIC_RCU is not setCONFIG_PREEMPT_RCU=yCONFIG_RCU_TRACE=yCONFIG_ASM_SEMAPHORES=yCONFIG_X86_UP_APIC=yCONFIG_X86_UP_IOAPIC=yCONFIG_X86_LOCAL_APIC=yCONFIG_X86_IO_APIC=yCONFIG_X86_MCE=y
# CONFIG_X86_MCE_NONFATAL is not set
# CONFIG_X86_MCE_P4THERMAL is not setCONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
# CONFIG_MICROCODE is not setCONFIG_X86_MSR=mCONFIG_X86_CPUID=m
#
# Firmware Drivers
#CONFIG_EDD=mCONFIG_DELL_RBU=mCONFIG_DCDBAS=m
# CONFIG_NOHIGHMEM is not setCONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not setCONFIG_PAGE_OFFSET=0xC0000000CONFIG_HIGHMEM=yCONFIG_ARCH_FLATMEM_ENABLE=yCONFIG_ARCH_SPARSEMEM_ENABLE=yCONFIG_ARCH_SELECT_MEMORY_MODEL=yCONFIG_ARCH_POPULATES_NODE_MAP=yCONFIG_SELECT_MEMORY_MODEL=yCONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not setCONFIG_FLATMEM=yCONFIG_FLAT_NODE_MEM_MAP=yCONFIG_SPARSEMEM_STATIC=yCONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not setCONFIG_HIGHPTE=y
# CONFIG_MATH_EMULATION is not setCONFIG_MTRR=y
# CONFIG_EFI is not set
# CONFIG_SECCOMP is not set
# CONFIG_HZ_100 is not setCONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not setCONFIG_HZ=250CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not setCONFIG_PHYSICAL_START=0x100000
# CONFIG_RELOCATABLE is not setCONFIG_PHYSICAL_ALIGN=0x100000
# CONFIG_COMPAT_VDSO is not setCONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management options (ACPI, APM)
#CONFIG_PM=yCONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not setCONFIG_PM_SYSFS_DEPRECATED=yCONFIG_SOFTWARE_SUSPEND=yCONFIG_PM_STD_PARTITION=""
#
# ACPI (Advanced Configuration and Power Interface) Support #CONFIG_ACPI=yCONFIG_ACPI_SLEEP=yCONFIG_ACPI_SLEEP_PROC_FS=y
# CONFIG_ACPI_SLEEP_PROC_SLEEP is not set CONFIG_ACPI_AC=mCONFIG_ACPI_BATTERY=mCONFIG_ACPI_BUTTON=mCONFIG_ACPI_VIDEO=m
# CONFIG_ACPI_HOTKEY is not setCONFIG_ACPI_FAN=yCONFIG_ACPI_DOCK=m
# CONFIG_ACPI_PROCESSOR is not set CONFIG_ACPI_ASUS=mCONFIG_ACPI_IBM=mCONFIG_ACPI_TOSHIBA=m CONFIG_ACPI_BLACKLIST_YEAR=1999
# CONFIG_ACPI_DEBUG is not setCONFIG_ACPI_EC=yCONFIG_ACPI_POWER=yCONFIG_ACPI_SYSTEM=yCONFIG_X86_PM_TIMER=yCONFIG_ACPI_CONTAINER=yCONFIG_ACPI_SBS=m
#
# APM (Advanced Power Management) BIOS Support
#CONFIG_APM=y
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
# CONFIG_APM_DO_ENABLE is not set
# CONFIG_APM_CPU_IDLE is not set
# CONFIG_APM_DISPLAY_BLANK is not setCONFIG_APM_RTC_IS_GMT=y
# CONFIG_APM_ALLOW_INTS is not set
# CONFIG_APM_REAL_MODE_POWER_OFF is not set
#
# CPU Frequency scaling
#CONFIG_CPU_FREQ=yCONFIG_CPU_FREQ_TABLE=m CONFIG_CPU_FREQ_DEBUG=y CONFIG_CPU_FREQ_STAT=m CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=m CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
#
# CPUFreq processor drivers
#
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not setCONFIG_X86_POWERNOW_K8=m
# CONFIG_X86_GX_SUSPMOD is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_SPEEDSTEP_ICH is not set
# CONFIG_X86_SPEEDSTEP_SMI is not set
# CONFIG_X86_P4_CLOCKMOD is not set
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
#
# shared options # # CONFIG_X86_SPEEDSTEP_LIB is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not setCONFIG_PCI_GOANY=yCONFIG_PCI_BIOS=yCONFIG_PCI_DIRECT=yCONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_DEBUG is not setCONFIG_HT_IRQ=yCONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not setCONFIG_K8_NB=y
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#CONFIG_HOTPLUG_PCI=yCONFIG_HOTPLUG_PCI_FAKE=mCONFIG_HOTPLUG_PCI_COMPAQ=m
# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
# CONFIG_HOTPLUG_PCI_IBM is not setCONFIG_HOTPLUG_PCI_ACPI=mCONFIG_HOTPLUG_PCI_ACPI_IBM=m
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
#
# Executable file formats
#CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not setCONFIG_BINFMT_MISC=y
#
# Networking
#CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not setCONFIG_PACKET=yCONFIG_PACKET_MMAP=yCONFIG_UNIX=yCONFIG_XFRM=yCONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not setCONFIG_NET_KEY=mCONFIG_INET=yCONFIG_IP_MULTICAST=yCONFIG_IP_ADVANCED_ROUTER=yCONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not setCONFIG_IP_FIB_HASH=yCONFIG_IP_MULTIPLE_TABLES=yCONFIG_IP_ROUTE_MULTIPATH=y
# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not setCONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not setCONFIG_NET_IPIP=mCONFIG_NET_IPGRE=mCONFIG_NET_IPGRE_BROADCAST=yCONFIG_IP_MROUTE=yCONFIG_IP_PIMSM_V1=yCONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not setCONFIG_SYN_COOKIES=yCONFIG_INET_AH=mCONFIG_INET_ESP=mCONFIG_INET_IPCOMP=mCONFIG_INET_XFRM_TUNNEL=mCONFIG_INET_TUNNEL=mCONFIG_INET_XFRM_MODE_TRANSPORT=mCONFIG_INET_XFRM_MODE_TUNNEL=mCONFIG_INET_XFRM_MODE_BEET=mCONFIG_INET_DIAG=mCONFIG_INET_TCP_DIAG=mCONFIG_TCP_CONG_ADVANCED=yCONFIG_TCP_CONG_BIC=yCONFIG_TCP_CONG_CUBIC=mCONFIG_TCP_CONG_WESTWOOD=mCONFIG_TCP_CONG_HTCP=mCONFIG_TCP_CONG_HSTCP=mCONFIG_TCP_CONG_HYBLA=mCONFIG_TCP_CONG_VEGAS=mCONFIG_TCP_CONG_SCALABLE=mCONFIG_TCP_CONG_LP=mCONFIG_TCP_CONG_VENO=mCONFIG_DEFAULT_BIC=y
# CONFIG_DEFAULT_CUBIC is not set
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not setCONFIG_DEFAULT_TCP_CONG="bic"
# CONFIG_TCP_MD5SIG is not set
#
# IP: Virtual Server Configuration
#CONFIG_IP_VS=m
# CONFIG_IP_VS_DEBUG is not setCONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#CONFIG_IP_VS_PROTO_TCP=yCONFIG_IP_VS_PROTO_UDP=yCONFIG_IP_VS_PROTO_ESP=yCONFIG_IP_VS_PROTO_AH=y
#
# IPVS scheduler
#CONFIG_IP_VS_RR=mCONFIG_IP_VS_WRR=mCONFIG_IP_VS_LC=mCONFIG_IP_VS_WLC=mCONFIG_IP_VS_LBLC=mCONFIG_IP_VS_LBLCR=mCONFIG_IP_VS_DH=mCONFIG_IP_VS_SH=mCONFIG_IP_VS_SED=mCONFIG_IP_VS_NQ=m
#
# IPVS application helper
#CONFIG_IP_VS_FTP=m
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not setCONFIG_NETLABEL=yCONFIG_NETWORK_SECMARK=yCONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not setCONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#CONFIG_NETFILTER_NETLINK=mCONFIG_NETFILTER_NETLINK_QUEUE=mCONFIG_NETFILTER_NETLINK_LOG=m
# CONFIG_NF_CONNTRACK_ENABLED is not setCONFIG_NETFILTER_XTABLES=mCONFIG_NETFILTER_XT_TARGET_CLASSIFY=mCONFIG_NETFILTER_XT_TARGET_DSCP=mCONFIG_NETFILTER_XT_TARGET_MARK=mCONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not setCONFIG_NETFILTER_XT_TARGET_SECMARK=mCONFIG_NETFILTER_XT_MATCH_COMMENT=mCONFIG_NETFILTER_XT_MATCH_DCCP=mCONFIG_NETFILTER_XT_MATCH_DSCP=mCONFIG_NETFILTER_XT_MATCH_ESP=mCONFIG_NETFILTER_XT_MATCH_LENGTH=mCONFIG_NETFILTER_XT_MATCH_LIMIT=mCONFIG_NETFILTER_XT_MATCH_MAC=mCONFIG_NETFILTER_XT_MATCH_MARK=mCONFIG_NETFILTER_XT_MATCH_POLICY=mCONFIG_NETFILTER_XT_MATCH_MULTIPORT=mCONFIG_NETFILTER_XT_MATCH_PHYSDEV=mCONFIG_NETFILTER_XT_MATCH_PKTTYPE=mCONFIG_NETFILTER_XT_MATCH_QUOTA=mCONFIG_NETFILTER_XT_MATCH_REALM=mCONFIG_NETFILTER_XT_MATCH_SCTP=mCONFIG_NETFILTER_XT_MATCH_STATISTIC=mCONFIG_NETFILTER_XT_MATCH_STRING=mCONFIG_NETFILTER_XT_MATCH_TCPMSS=m
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
#
# IP: Netfilter Configuration
#CONFIG_IP_NF_QUEUE=mCONFIG_IP_NF_IPTABLES=mCONFIG_IP_NF_MATCH_IPRANGE=mCONFIG_IP_NF_MATCH_TOS=mCONFIG_IP_NF_MATCH_RECENT=mCONFIG_IP_NF_MATCH_ECN=mCONFIG_IP_NF_MATCH_AH=mCONFIG_IP_NF_MATCH_TTL=mCONFIG_IP_NF_MATCH_OWNER=mCONFIG_IP_NF_MATCH_ADDRTYPE=mCONFIG_IP_NF_FILTER=mCONFIG_IP_NF_TARGET_REJECT=mCONFIG_IP_NF_TARGET_LOG=mCONFIG_IP_NF_TARGET_ULOG=mCONFIG_IP_NF_TARGET_TCPMSS=mCONFIG_IP_NF_MANGLE=mCONFIG_IP_NF_TARGET_TOS=mCONFIG_IP_NF_TARGET_ECN=mCONFIG_IP_NF_TARGET_TTL=mCONFIG_IP_NF_RAW=mCONFIG_IP_NF_ARPTABLES=mCONFIG_IP_NF_ARPFILTER=mCONFIG_IP_NF_ARP_MANGLE=m
#
# Bridge: Netfilter Configuration
#CONFIG_BRIDGE_NF_EBTABLES=mCONFIG_BRIDGE_EBT_BROUTE=mCONFIG_BRIDGE_EBT_T_FILTER=mCONFIG_BRIDGE_EBT_T_NAT=mCONFIG_BRIDGE_EBT_802_3=mCONFIG_BRIDGE_EBT_AMONG=mCONFIG_BRIDGE_EBT_ARP=mCONFIG_BRIDGE_EBT_IP=mCONFIG_BRIDGE_EBT_LIMIT=mCONFIG_BRIDGE_EBT_MARK=mCONFIG_BRIDGE_EBT_PKTTYPE=mCONFIG_BRIDGE_EBT_STP=mCONFIG_BRIDGE_EBT_VLAN=mCONFIG_BRIDGE_EBT_ARPREPLY=mCONFIG_BRIDGE_EBT_DNAT=mCONFIG_BRIDGE_EBT_MARK_T=mCONFIG_BRIDGE_EBT_REDIRECT=mCONFIG_BRIDGE_EBT_SNAT=mCONFIG_BRIDGE_EBT_LOG=mCONFIG_BRIDGE_EBT_ULOG=m
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not setCONFIG_BRIDGE=mCONFIG_VLAN_8021Q=m
# CONFIG_DECNET is not setCONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#CONFIG_NET_SCHED=yCONFIG_NET_SCH_FIFO=y
# CONFIG_NET_SCH_CLK_JIFFIES is not setCONFIG_NET_SCH_CLK_GETTIMEOFDAY=y
# CONFIG_NET_SCH_CLK_CPU is not set
#
# Queueing/Scheduling
#CONFIG_NET_SCH_CBQ=mCONFIG_NET_SCH_HTB=mCONFIG_NET_SCH_HFSC=mCONFIG_NET_SCH_PRIO=mCONFIG_NET_SCH_RED=mCONFIG_NET_SCH_SFQ=mCONFIG_NET_SCH_TEQL=mCONFIG_NET_SCH_TBF=mCONFIG_NET_SCH_GRED=mCONFIG_NET_SCH_DSMARK=mCONFIG_NET_SCH_NETEM=mCONFIG_NET_SCH_INGRESS=m
#
# Classification
#CONFIG_NET_CLS=yCONFIG_NET_CLS_BASIC=mCONFIG_NET_CLS_TCINDEX=mCONFIG_NET_CLS_ROUTE4=mCONFIG_NET_CLS_ROUTE=yCONFIG_NET_CLS_FW=mCONFIG_NET_CLS_U32=mCONFIG_CLS_U32_PERF=yCONFIG_CLS_U32_MARK=yCONFIG_NET_CLS_RSVP=mCONFIG_NET_CLS_RSVP6=mCONFIG_NET_EMATCH=yCONFIG_NET_EMATCH_STACK=32CONFIG_NET_EMATCH_CMP=mCONFIG_NET_EMATCH_NBYTE=mCONFIG_NET_EMATCH_U32=mCONFIG_NET_EMATCH_META=mCONFIG_NET_EMATCH_TEXT=mCONFIG_NET_CLS_ACT=yCONFIG_NET_ACT_POLICE=mCONFIG_NET_ACT_GACT=mCONFIG_GACT_PROB=yCONFIG_NET_ACT_MIRRED=mCONFIG_NET_ACT_IPT=mCONFIG_NET_ACT_PEDIT=mCONFIG_NET_ACT_SIMP=mCONFIG_NET_CLS_IND=yCONFIG_NET_ESTIMATOR=y
#
# Network testing
#CONFIG_NET_PKTGEN=m
# CONFIG_NET_TCPPROBE is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not setCONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not setCONFIG_IEEE80211_CRYPT_WEP=mCONFIG_IEEE80211_CRYPT_CCMP=mCONFIG_IEEE80211_SOFTMAC=mCONFIG_IEEE80211_SOFTMAC_DEBUG=yCONFIG_WIRELESS_EXT=yCONFIG_FIB_RULES=y
#
# Device Drivers
#
#
# Generic Driver Options
#CONFIG_STANDALONE=yCONFIG_PREVENT_FIRMWARE_BUILD=yCONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker #CONFIG_CONNECTOR=yCONFIG_PROC_EVENTS=y
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#CONFIG_PARPORT=mCONFIG_PARPORT_PC=mCONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not setCONFIG_PARPORT_1284=y
#
# Plug and Play support
#CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#CONFIG_PNPACPI=y
#
# Block devices
#CONFIG_BLK_DEV_FD=m
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not setCONFIG_BLK_DEV_LOOP=mCONFIG_BLK_DEV_CRYPTOLOOP=mCONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not setCONFIG_BLK_DEV_UB=mCONFIG_BLK_DEV_RAM=yCONFIG_BLK_DEV_RAM_COUNT=16CONFIG_BLK_DEV_RAM_SIZE=16384CONFIG_BLK_DEV_RAM_BLOCKSIZE=4096CONFIG_BLK_DEV_INITRD=yCONFIG_CDROM_PKTCDVD=mCONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
# CONFIG_SGI_IOC4 is not setCONFIG_TIFM_CORE=mCONFIG_TIFM_7XX1=m
# CONFIG_MSI_LAPTOP is not set
#
# ATA/ATAPI/MFM/RLL support
#CONFIG_IDE=yCONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives #
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=yCONFIG_IDEDISK_MULTI_MODE=yCONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set CONFIG_BLK_DEV_IDESCSI=mCONFIG_IDE_TASK_IOCTL=y
#
# IDE chipset support/bugfixes
#CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not setCONFIG_BLK_DEV_IDEPCI=yCONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not setCONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not setCONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not setCONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_CS5535 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not setCONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_IDE_ARM is not setCONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not setCONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#CONFIG_RAID_ATTRS=mCONFIG_SCSI=m
# CONFIG_SCSI_TGT is not setCONFIG_SCSI_NETLINK=yCONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not setCONFIG_BLK_DEV_SR=mCONFIG_BLK_DEV_SR_VENDOR=yCONFIG_CHR_DEV_SG=mCONFIG_CHR_DEV_SCH=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs #CONFIG_SCSI_MULTI_LUN=yCONFIG_SCSI_CONSTANTS=yCONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
#CONFIG_SCSI_SPI_ATTRS=mCONFIG_SCSI_FC_ATTRS=mCONFIG_SCSI_ISCSI_ATTRS=mCONFIG_SCSI_SAS_ATTRS=mCONFIG_SCSI_SAS_LIBSAS=m
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
#
# SCSI low-level drivers
#CONFIG_ISCSI_TCP=m
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
#
# Serial ATA (prod) and Parallel ATA (experimental) drivers #
# CONFIG_ATA is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#CONFIG_I2O=m
# CONFIG_I2O_LCT_NOTIFY_ON_CHANGES is not setCONFIG_I2O_EXT_ADAPTEC=yCONFIG_I2O_CONFIG=mCONFIG_I2O_CONFIG_OLD_IOCTL=yCONFIG_I2O_BUS=mCONFIG_I2O_BLOCK=mCONFIG_I2O_SCSI=mCONFIG_I2O_PROC=m
#
# Network device support
#CONFIG_NETDEVICES=yCONFIG_IFB=mCONFIG_DUMMY=mCONFIG_BONDING=m
# CONFIG_EQUALIZER is not setCONFIG_TUN=m
# CONFIG_NET_SB1000 is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
#
# Ethernet (10 or 100Mbit)
#
# CONFIG_NET_ETHERNET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not setCONFIG_R8169=mCONFIG_R8169_NAPI=yCONFIG_R8169_VLAN=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not setCONFIG_NETCONSOLE=mCONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not setCONFIG_NETPOLL_TRAP=yCONFIG_NET_POLL_CONTROLLER=y
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#CONFIG_INPUT=yCONFIG_INPUT_FF_MEMLESS=y
#
# Userland interfaces
#CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not setCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not setCONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=yCONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not setCONFIG_KEYBOARD_STOWAWAY=mCONFIG_INPUT_MOUSE=yCONFIG_MOUSE_PS2=yCONFIG_MOUSE_SERIAL=mCONFIG_MOUSE_VSXXXAA=m
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not setCONFIG_INPUT_MISC=yCONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_WISTRON_BTNS is not set
# CONFIG_INPUT_UINPUT is not set
#
# Hardware I/O ports
#CONFIG_SERIO=yCONFIG_SERIO_I8042=yCONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not setCONFIG_SERIO_LIBPS2=yCONFIG_SERIO_RAW=mCONFIG_GAMEPORT=m
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set
#
# Character devices
#CONFIG_VT=yCONFIG_VT_CONSOLE=yCONFIG_HW_CONSOLE=yCONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#CONFIG_SERIAL_8250=yCONFIG_SERIAL_8250_CONSOLE=yCONFIG_SERIAL_8250_PCI=yCONFIG_SERIAL_8250_PNP=yCONFIG_SERIAL_8250_NR_UARTS=32CONFIG_SERIAL_8250_RUNTIME_UARTS=4CONFIG_SERIAL_8250_EXTENDED=yCONFIG_SERIAL_8250_MANY_PORTS=yCONFIG_SERIAL_8250_SHARE_IRQ=yCONFIG_SERIAL_8250_DETECT_IRQ=yCONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#CONFIG_SERIAL_CORE=yCONFIG_SERIAL_CORE_CONSOLE=yCONFIG_SERIAL_JSM=mCONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not setCONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
#
# IPMI
#CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not setCONFIG_IPMI_DEVICE_INTERFACE=mCONFIG_IPMI_SI=mCONFIG_IPMI_WATCHDOG=mCONFIG_IPMI_POWEROFF=m
#
# Watchdog Cards
#CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#CONFIG_SOFT_WATCHDOG=m
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_I8XX_TCO is not set
# CONFIG_ITCO_WDT is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC37B787_WDT is not setCONFIG_W83627HF_WDT=mCONFIG_W83697HF_WDT=mCONFIG_W83877F_WDT=mCONFIG_W83977F_WDT=m
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not setCONFIG_HW_RANDOM=yCONFIG_HW_RANDOM_INTEL=m
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_GEODE is not setCONFIG_HW_RANDOM_VIA=mCONFIG_NVRAM=yCONFIG_RTC=y
# CONFIG_RTC_HISTOGRAM is not set
# CONFIG_BLOCKER is not set
# CONFIG_LPPTEST is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not setCONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not setCONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not setCONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_MWAVE is not set
CONFIG_PC8736x_GPIO=mCONFIG_NSC_GPIO=m
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not setCONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
# CONFIG_HPET_MMAP is not setCONFIG_HANGCHECK_TIMER=m
#
# TPM devices
#CONFIG_TCG_TPM=mCONFIG_TCG_TIS=mCONFIG_TCG_NSC=mCONFIG_TCG_ATMEL=mCONFIG_TCG_INFINEON=m
# CONFIG_TELCLOCK is not set
#
# I2C support
#CONFIG_I2C=mCONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#CONFIG_I2C_ALGOBIT=mCONFIG_I2C_ALGOPCF=mCONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not setCONFIG_I2C_I801=mCONFIG_I2C_I810=mCONFIG_I2C_PIIX4=mCONFIG_I2C_ISA=m
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_OCORES is not setCONFIG_I2C_PARPORT=mCONFIG_I2C_PARPORT_LIGHT=m
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not setCONFIG_I2C_STUB=m
# CONFIG_I2C_VIA is not setCONFIG_I2C_VIAPRO=m
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
#
# Miscellaneous I2C Chip support
#CONFIG_SENSORS_DS1337=mCONFIG_SENSORS_DS1374=mCONFIG_SENSORS_EEPROM=mCONFIG_SENSORS_PCF8574=mCONFIG_SENSORS_PCA9539=mCONFIG_SENSORS_PCF8591=mCONFIG_SENSORS_MAX6875=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#CONFIG_HWMON=mCONFIG_HWMON_VID=m
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not setCONFIG_SENSORS_K8TEMP=m
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not setCONFIG_SENSORS_VT8231=mCONFIG_SENSORS_W83781D=mCONFIG_SENSORS_W83791D=mCONFIG_SENSORS_W83792D=m
# CONFIG_SENSORS_W83793 is not setCONFIG_SENSORS_W83L785TS=mCONFIG_SENSORS_W83627HF=mCONFIG_SENSORS_W83627EHF=m
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Multimedia devices
#CONFIG_VIDEO_DEV=mCONFIG_VIDEO_V4L1=yCONFIG_VIDEO_V4L1_COMPAT=yCONFIG_VIDEO_V4L2=y
#
# Video Capture Adapters
#
#
# Video Capture Adapters
#
# CONFIG_VIDEO_ADV_DEBUG is not setCONFIG_VIDEO_HELPER_CHIPS_AUTO=yCONFIG_VIDEO_VIVI=m
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_W9966 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
#
# V4L USB devices
#
# CONFIG_VIDEO_PVRUSB2 is not set
# CONFIG_VIDEO_EM28XX is not set
# CONFIG_VIDEO_USBVISION is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_QUICKCAM_MESSENGER is not set
# CONFIG_USB_ET61X251 is not set
# CONFIG_VIDEO_OVCAMCHIP is not set
# CONFIG_USB_W9968CF is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set
# CONFIG_USB_ZC0301 is not setCONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
#
# Radio Adapters
#
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_USB_DSBR is not set
#
# Digital Video Broadcasting Devices
#CONFIG_DVB=yCONFIG_DVB_CORE=m
# CONFIG_DVB_CORE_ATTACH is not set
#
# Supported SAA7146 based PCI Adapters
#
# CONFIG_DVB_AV7110 is not set
# CONFIG_DVB_BUDGET is not set
# CONFIG_DVB_BUDGET_CI is not set
# CONFIG_DVB_BUDGET_AV is not set
#
# Supported USB Adapters
#CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
# CONFIG_DVB_USB_A800 is not set
# CONFIG_DVB_USB_DIBUSB_MB is not set
# CONFIG_DVB_USB_DIBUSB_MC is not set
# CONFIG_DVB_USB_DIB0700 is not set
# CONFIG_DVB_USB_UMT_010 is not set
# CONFIG_DVB_USB_CXUSB is not set
# CONFIG_DVB_USB_DIGITV is not set
# CONFIG_DVB_USB_VP7045 is not set
# CONFIG_DVB_USB_VP702X is not set
# CONFIG_DVB_USB_GP8PSK is not set
# CONFIG_DVB_USB_NOVA_T_USB2 is not set
# CONFIG_DVB_USB_TTUSB2 is not set
# CONFIG_DVB_USB_DTT200U is not set
# CONFIG_DVB_TTUSB_BUDGET is not set
# CONFIG_DVB_TTUSB_DEC is not set
# CONFIG_DVB_CINERGYT2 is not set
#
# Supported FlexCopII (B2C2) Adapters
#
# CONFIG_DVB_B2C2_FLEXCOP is not set
#
# Supported BT878 Adapters
#
#
# Supported Pluto2 Adapters
#
# CONFIG_DVB_PLUTO2 is not set
#
# Supported DVB Frontends
#
#
# Customise DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set
#
# DVB-S (satellite) frontends
#
# CONFIG_DVB_STV0299 is not set
# CONFIG_DVB_CX24110 is not set
# CONFIG_DVB_CX24123 is not set
# CONFIG_DVB_TDA8083 is not set
# CONFIG_DVB_MT312 is not set
# CONFIG_DVB_VES1X93 is not set
# CONFIG_DVB_S5H1420 is not set
# CONFIG_DVB_TDA10086 is not set
#
# DVB-T (terrestrial) frontends
#
# CONFIG_DVB_SP8870 is not set
# CONFIG_DVB_SP887X is not set
# CONFIG_DVB_CX22700 is not set
# CONFIG_DVB_CX22702 is not set
# CONFIG_DVB_L64781 is not set
# CONFIG_DVB_TDA1004X is not set
# CONFIG_DVB_NXT6000 is not set
# CONFIG_DVB_MT352 is not set
# CONFIG_DVB_ZL10353 is not set
# CONFIG_DVB_DIB3000MB is not set
# CONFIG_DVB_DIB3000MC is not set
# CONFIG_DVB_DIB7000M is not set
# CONFIG_DVB_DIB7000P is not set
#
# DVB-C (cable) frontends
#
# CONFIG_DVB_VES1820 is not set
# CONFIG_DVB_TDA10021 is not set
# CONFIG_DVB_STV0297 is not set
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends #
# CONFIG_DVB_NXT200X is not set
# CONFIG_DVB_OR51211 is not set
# CONFIG_DVB_OR51132 is not set
# CONFIG_DVB_BCM3510 is not set
# CONFIG_DVB_LGDT330X is not set
#
# Tuners/PLL support
#CONFIG_DVB_PLL=m
# CONFIG_DVB_TDA826X is not set
# CONFIG_DVB_TUNER_MT2060 is not set
# CONFIG_DVB_TUNER_LGH06XF is not set
#
# Miscellaneous devices
#
# CONFIG_DVB_LNBP21 is not set
# CONFIG_DVB_ISL6421 is not set
# CONFIG_DVB_TUA6100 is not setCONFIG_VIDEO_BUF=m
# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
# CONFIG_FIRMWARE_EDID is not setCONFIG_FB=y
# CONFIG_FB_DDC is not setCONFIG_FB_CFB_FILLRECT=yCONFIG_FB_CFB_COPYAREA=yCONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not setCONFIG_FB_MODE_HELPERS=yCONFIG_FB_TILEBLITTING=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not setCONFIG_FB_VGA16=mCONFIG_FB_VESA=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not setCONFIG_FB_NVIDIA=mCONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#CONFIG_VGA_CONSOLE=yCONFIG_VGACON_SOFT_SCROLLBACK=yCONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64CONFIG_VIDEO_SELECT=yCONFIG_DUMMY_CONSOLE=yCONFIG_FRAMEBUFFER_CONSOLE=yCONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not setCONFIG_LOGO_LINUX_CLUT224=yCONFIG_BACKLIGHT_LCD_SUPPORT=yCONFIG_BACKLIGHT_CLASS_DEVICE=mCONFIG_BACKLIGHT_DEVICE=yCONFIG_LCD_CLASS_DEVICE=mCONFIG_LCD_DEVICE=y
#
# Sound
#CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#CONFIG_SND=mCONFIG_SND_TIMER=mCONFIG_SND_PCM=mCONFIG_SND_HWDEP=mCONFIG_SND_RAWMIDI=mCONFIG_SND_SEQUENCER=mCONFIG_SND_SEQ_DUMMY=mCONFIG_SND_OSSEMUL=yCONFIG_SND_MIXER_OSS=mCONFIG_SND_PCM_OSS=mCONFIG_SND_PCM_OSS_PLUGINS=yCONFIG_SND_SEQUENCER_OSS=yCONFIG_SND_RTCTIMER=mCONFIG_SND_SEQ_RTCTIMER_DEFAULT=yCONFIG_SND_DYNAMIC_MINORS=y
# CONFIG_SND_SUPPORT_OLD_API is not setCONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#CONFIG_SND_MPU401_UART=mCONFIG_SND_AC97_CODEC=mCONFIG_SND_DUMMY=mCONFIG_SND_VIRMIDI=mCONFIG_SND_MTPAV=mCONFIG_SND_MTS64=m
# CONFIG_SND_SERIAL_U16550 is not setCONFIG_SND_MPU401=m
#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not setCONFIG_SND_VIA82XX=m
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not setCONFIG_SND_AC97_POWER_SAVE=y
#
# USB devices
#CONFIG_SND_USB_AUDIO=mCONFIG_SND_USB_USX2Y=m
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not setCONFIG_AC97_BUS=m
#
# HID Devices
#CONFIG_HID=y
#
# USB support
#CONFIG_USB_ARCH_HAS_HCD=yCONFIG_USB_ARCH_HAS_OHCI=yCONFIG_USB_ARCH_HAS_EHCI=yCONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#CONFIG_USB_EHCI_HCD=mCONFIG_USB_EHCI_SPLIT_ISO=yCONFIG_USB_EHCI_ROOT_HUB_TT=yCONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not setCONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not setCONFIG_USB_PRINTER=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' #
#
# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y CONFIG_USB_STORAGE_ISD200=y CONFIG_USB_STORAGE_DPCM=y CONFIG_USB_STORAGE_USBAT=y CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_KARMA is not set CONFIG_USB_LIBUSUAL=y
#
# USB Input Devices
#CONFIG_USB_HID=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not setCONFIG_USB_HIDDEV=y
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not setCONFIG_USB_TOUCHSCREEN=mCONFIG_USB_TOUCHSCREEN_EGALAX=yCONFIG_USB_TOUCHSCREEN_PANJIT=yCONFIG_USB_TOUCHSCREEN_3M=yCONFIG_USB_TOUCHSCREEN_ITM=yCONFIG_USB_TOUCHSCREEN_ETURBO=yCONFIG_USB_TOUCHSCREEN_GUNZE=yCONFIG_USB_TOUCHSCREEN_DMC_TSC10=y
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not setCONFIG_USB_MON=y
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_TEST is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# LED drivers
#
#
# LED Triggers
#
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) #
# CONFIG_EDAC is not set
#
# Real Time Clock
#CONFIG_RTC_LIB=mCONFIG_RTC_CLASS=m
#
# RTC interfaces
#CONFIG_RTC_INTF_SYSFS=mCONFIG_RTC_INTF_PROC=mCONFIG_RTC_INTF_DEV=m
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
#
# RTC drivers
#CONFIG_RTC_DRV_X1205=mCONFIG_RTC_DRV_DS1307=mCONFIG_RTC_DRV_DS1553=mCONFIG_RTC_DRV_ISL1208=m
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_TEST is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# DMA Engine support
#CONFIG_DMA_ENGINE=y
#
# DMA Clients
#CONFIG_NET_DMA=y
#
# DMA Devices
#CONFIG_INTEL_IOATDMA=m
#
# Virtualization
#
# CONFIG_KVM is not set
#
# File systems
#CONFIG_EXT2_FS=yCONFIG_EXT2_FS_XATTR=yCONFIG_EXT2_FS_POSIX_ACL=yCONFIG_EXT2_FS_SECURITY=yCONFIG_EXT2_FS_XIP=yCONFIG_FS_XIP=yCONFIG_EXT3_FS=yCONFIG_EXT3_FS_XATTR=yCONFIG_EXT3_FS_POSIX_ACL=yCONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4DEV_FS is not setCONFIG_JBD=y
# CONFIG_JBD_DEBUG is not setCONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not setCONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not setCONFIG_ROMFS_FS=mCONFIG_INOTIFY=yCONFIG_INOTIFY_USER=yCONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not setCONFIG_QFMT_V2=yCONFIG_QUOTACTL=yCONFIG_DNOTIFY=yCONFIG_AUTOFS_FS=mCONFIG_AUTOFS4_FS=mCONFIG_FUSE_FS=mCONFIG_GENERIC_ACL=y
#
# CD-ROM/DVD Filesystems
#CONFIG_ISO9660_FS=yCONFIG_JOLIET=yCONFIG_ZISOFS=yCONFIG_ZISOFS_FS=yCONFIG_UDF_FS=mCONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#CONFIG_FAT_FS=mCONFIG_MSDOS_FS=mCONFIG_VFAT_FS=mCONFIG_FAT_DEFAULT_CODEPAGE=437CONFIG_FAT_DEFAULT_IOCHARSET="ascii"CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#CONFIG_PROC_FS=yCONFIG_PROC_KCORE=yCONFIG_PROC_SYSCTL=yCONFIG_SYSFS=yCONFIG_TMPFS=yCONFIG_TMPFS_POSIX_ACL=yCONFIG_HUGETLBFS=yCONFIG_HUGETLB_PAGE=yCONFIG_RAMFS=yCONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not setCONFIG_ECRYPT_FS=m
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not setCONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#CONFIG_NFS_FS=mCONFIG_NFS_V3=yCONFIG_NFS_V3_ACL=yCONFIG_NFS_V4=yCONFIG_NFS_DIRECTIO=yCONFIG_NFSD=mCONFIG_NFSD_V2_ACL=yCONFIG_NFSD_V3=yCONFIG_NFSD_V3_ACL=yCONFIG_NFSD_V4=yCONFIG_NFSD_TCP=yCONFIG_LOCKD=mCONFIG_LOCKD_V4=yCONFIG_EXPORTFS=mCONFIG_NFS_ACL_SUPPORT=mCONFIG_NFS_COMMON=yCONFIG_SUNRPC=mCONFIG_SUNRPC_GSS=mCONFIG_RPCSEC_GSS_KRB5=mCONFIG_RPCSEC_GSS_SPKM3=m
# CONFIG_SMB_FS is not setCONFIG_CIFS=m
# CONFIG_CIFS_STATS is not setCONFIG_CIFS_WEAK_PW_HASH=yCONFIG_CIFS_XATTR=yCONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not setCONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
# Native Language Support
#CONFIG_NLS=yCONFIG_NLS_DEFAULT="utf8"CONFIG_NLS_CODEPAGE_437=yCONFIG_NLS_CODEPAGE_737=mCONFIG_NLS_CODEPAGE_775=mCONFIG_NLS_CODEPAGE_850=mCONFIG_NLS_CODEPAGE_852=yCONFIG_NLS_CODEPAGE_855=m
# CONFIG_NLS_CODEPAGE_857 is not setCONFIG_NLS_CODEPAGE_860=mCONFIG_NLS_CODEPAGE_861=mCONFIG_NLS_CODEPAGE_862=mCONFIG_NLS_CODEPAGE_863=mCONFIG_NLS_CODEPAGE_864=mCONFIG_NLS_CODEPAGE_865=mCONFIG_NLS_CODEPAGE_866=mCONFIG_NLS_CODEPAGE_869=m
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not setCONFIG_NLS_ISO8859_8=mCONFIG_NLS_CODEPAGE_1250=mCONFIG_NLS_CODEPAGE_1251=mCONFIG_NLS_ASCII=yCONFIG_NLS_ISO8859_1=mCONFIG_NLS_ISO8859_2=mCONFIG_NLS_ISO8859_3=mCONFIG_NLS_ISO8859_4=mCONFIG_NLS_ISO8859_5=mCONFIG_NLS_ISO8859_6=mCONFIG_NLS_ISO8859_7=mCONFIG_NLS_ISO8859_9=mCONFIG_NLS_ISO8859_13=mCONFIG_NLS_ISO8859_14=mCONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not setCONFIG_NLS_UTF8=m
#
# Distributed Lock Manager
#
# CONFIG_DLM is not set
#
# Instrumentation Support
#CONFIG_PROFILING=yCONFIG_OPROFILE=mCONFIG_PROFILE_NMI=yCONFIG_KPROBES=y
#
# Kernel hacking
#CONFIG_TRACE_IRQFLAGS_SUPPORT=yCONFIG_PRINTK_TIME=y
# CONFIG_ENABLE_MUST_CHECK is not setCONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not setCONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not setCONFIG_DEBUG_KERNEL=yCONFIG_LOG_BUF_SHIFT=17CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not setCONFIG_DEBUG_SPINLOCK=yCONFIG_DEBUG_MUTEXES=yCONFIG_DEBUG_RWSEMS=yCONFIG_DEBUG_LOCK_ALLOC=yCONFIG_PROVE_LOCKING=yCONFIG_LOCKDEP=yCONFIG_DEBUG_LOCKDEP=yCONFIG_TRACE_IRQFLAGS=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not setCONFIG_STACKTRACE=yCONFIG_EVENT_TRACE=yCONFIG_FUNCTION_TRACE=yCONFIG_WAKEUP_TIMING=yCONFIG_LATENCY_TRACE=yCONFIG_CRITICAL_PREEMPT_TIMING=yCONFIG_CRITICAL_IRQSOFF_TIMING=yCONFIG_WAKEUP_LATENCY_HIST=yCONFIG_PREEMPT_OFF_HIST=yCONFIG_INTERRUPT_OFF_HIST=yCONFIG_CRITICAL_TIMING=yCONFIG_DEBUG_TRACE_IRQFLAGS=yCONFIG_LATENCY_TIMING=yCONFIG_CRITICAL_LATENCY_HIST=yCONFIG_LATENCY_HIST=yCONFIG_MCOUNT=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not setCONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not setCONFIG_FRAME_POINTER=y
# CONFIG_UNWIND_INFO is not set
# CONFIG_FORCED_INLINING is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not setCONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
#
# Page alloc debug is incompatible with Software Suspend on i386 #CONFIG_DEBUG_RODATA=y
# CONFIG_4KSTACKS is not set CONFIG_X86_FIND_SMP_CONFIG=yCONFIG_X86_MPPARSE=yCONFIG_DOUBLEFAULT=y
#
# Security options
#CONFIG_KEYS=yCONFIG_KEYS_DEBUG_PROC_KEYS=yCONFIG_SECURITY=yCONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not setCONFIG_SECURITY_CAPABILITIES=y
# CONFIG_REALTIME_CAPABILITIES is not setCONFIG_SECURITY_ROOTPLUG=y
# CONFIG_SECURITY_SELINUX is not set
#
# Cryptographic options
#CONFIG_CRYPTO=yCONFIG_CRYPTO_ALGAPI=yCONFIG_CRYPTO_BLKCIPHER=mCONFIG_CRYPTO_HASH=yCONFIG_CRYPTO_MANAGER=yCONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not setCONFIG_CRYPTO_NULL=mCONFIG_CRYPTO_MD4=mCONFIG_CRYPTO_MD5=mCONFIG_CRYPTO_SHA1=yCONFIG_CRYPTO_SHA256=mCONFIG_CRYPTO_SHA512=mCONFIG_CRYPTO_WP512=mCONFIG_CRYPTO_TGR192=m
# CONFIG_CRYPTO_GF128MUL is not setCONFIG_CRYPTO_ECB=mCONFIG_CRYPTO_CBC=m
# CONFIG_CRYPTO_LRW is not setCONFIG_CRYPTO_DES=mCONFIG_CRYPTO_BLOWFISH=mCONFIG_CRYPTO_TWOFISH=mCONFIG_CRYPTO_TWOFISH_COMMON=m
# CONFIG_CRYPTO_TWOFISH_586 is not setCONFIG_CRYPTO_SERPENT=mCONFIG_CRYPTO_AES=m
# CONFIG_CRYPTO_AES_586 is not setCONFIG_CRYPTO_CAST5=mCONFIG_CRYPTO_CAST6=mCONFIG_CRYPTO_TEA=mCONFIG_CRYPTO_ARC4=mCONFIG_CRYPTO_KHAZAD=mCONFIG_CRYPTO_ANUBIS=mCONFIG_CRYPTO_DEFLATE=mCONFIG_CRYPTO_MICHAEL_MIC=mCONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#CONFIG_CRYPTO_DEV_PADLOCK=mCONFIG_CRYPTO_DEV_PADLOCK_AES=mCONFIG_CRYPTO_DEV_PADLOCK_SHA=m
# CONFIG_CRYPTO_DEV_GEODE is not set
#
# Library routines
#CONFIG_BITREVERSE=yCONFIG_CRC_CCITT=mCONFIG_CRC16=mCONFIG_CRC32=yCONFIG_LIBCRC32C=yCONFIG_AUDIT_GENERIC=yCONFIG_ZLIB_INFLATE=yCONFIG_ZLIB_DEFLATE=mCONFIG_TEXTSEARCH=yCONFIG_TEXTSEARCH_KMP=mCONFIG_TEXTSEARCH_BM=mCONFIG_TEXTSEARCH_FSM=mCONFIG_PLIST=yCONFIG_IOMAP_COPY=yCONFIG_GENERIC_HARDIRQS=yCONFIG_GENERIC_IRQ_PROBE=yCONFIG_X86_BIOS_REBOOT=yCONFIG_KTIME_SCALAR=y
Am Donnerstag, 1. Februar 2007 11:44 schrieb Karsten Wiese:
Quoted 3 lines
I think the wait is caused by an interrupt starting somewhere under
sysdev_resume(void).
possibly lapic timer interrupt? Will try to trace that.
Some evidence:
[root@a64 Desktop]# echo reboot > /sys/power/disk
[root@a64 Desktop]# cat /proc/interrupts; echo disk > /sys/power/state ; cat /proc/interrupts <snip>
LOC: 2215504
<snip, cmos clock untouched>
LOC: 2216432
<snip>
[root@a64 Desktop]# cat /proc/interrupts; echo disk > /sys/power/state ; cat /proc/interrupts <snip>
LOC: 2225752
<snip, cmos clock advanced by 1 month under biossettings>
LOC: 2238383
<snip>
Karsten
Am Donnerstag, 1. Februar 2007 11:44 schrieb Karsten Wiese:
Quoted 3 lines
I think the wait is caused by an interrupt starting somewhere under
sysdev_resume(void).
possibly lapic timer interrupt? Will try to trace that.
Some evidence:
[root@a64 Desktop]# echo reboot > /sys/power/disk
[root@a64 Desktop]# cat /proc/interrupts; echo disk > /sys/power/state ; cat /proc/interrupts <snip>
LOC: 2215504
<snip, cmos clock untouched>
LOC: 2216432
<snip>
[root@a64 Desktop]# cat /proc/interrupts; echo disk > /sys/power/state ; cat /proc/interrupts <snip>
LOC: 2225752
<snip, cmos clock advanced by 1 month under biossettings>
LOC: 2238383
<snip>
Karsten
Hi!
Quoted 11 lines · Karsten Wiese
Quoted 3 lines
Serial port console is off here and the jiffies update fix doesn't make a noticeable difference.
ok, this eliminates my serial port theory.
and this means i'm having trouble reproducing this problem locally. Maybe i tried it the wrong way: does it only occur with suspend-to-disk, or suspend-to-ram too? Does it need ACPI suspend-to-disk, or software-suspend?
? What is ACPI suspend-to-disk? There used to be S4bios *long* time ago... these days everyone does swsusp.
(Granted, you can select "shutdown" and "platform" flavours...)
Pavel
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
PATCH 1/1 gtod persistent clock resume fix
In reply to Karsten WieseThe reworked highres/dyntick code made a thinko in the resume code visible, which was magically working in the old queue.
On resume we add the slept time to xtime. This delta must be adjusted in wall_to_monotonic as well. The update of jiffies64 is bogus and a leftover of the code which was taken from arch/i386/kernel/time.c.
On suspend the current state of xtime, wall_to_monotonic and jiffies is frozen. After resume we need to add the slept time to xtime, but we need to subtract it from wall_to_monotonic, so the monotonic time is resuming from exactly the point where it was suspended. jiffies are restarting from the same point as well.
This solves the resume waittime observed by Karsten Wiese.
kernel/timer.c +3 -2
@@ -985,8 +985,9 @@ static int timekeeping_resume(struct sysif (now && (now > timekeeping_suspend_time)) {unsigned long sleep_length = now - timekeeping_suspend_time; + xtime.tv_sec += sleep_length; - jiffies_64 += (u64 )sleep_length *HZ ; + wall_to_monotonic.tv_sec -= sleep_length; }/* re-base the last cycle value */ clock->cycle_last =clocksource_read (clock);
@@ -994,7 +995,7 @@ static int timekeeping_resume(struct sys timekeeping_suspended =0 ;write_sequnlock_irqrestore (&xtime_lock, flags); -clockevents_notify (CLOCK_EVT_NOTIFY_RESUME ,NULL ); +touch_softlockup_watchdog ();/* Resume hrtimers */ clock_was_set ();
Andrew Morton napisał(a):
Quoted 8 lines
OK, thanks. That might be due to the time-management updates as well. I'll see if I can reproduce this.
If you're keen, you could test just 2.6.19-rc6+origin.patch+git-acpi.patch
from ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.20-rc6/2.6.20-rc6-mm3/broken-out and see which of these problems remain.
I try 2.6.19-rc6 witch origin.patch and git-acpi.patch. This patch didn't add correctly (see patch_output.txt). Also I have compiling error:
AS arch/i386/kernel/entry.o
CC arch/i386/kernel/traps.o
CC arch/i386/kernel/irq.o
CC arch/i386/kernel/ptrace.o
CC arch/i386/kernel/time.o
CC arch/i386/kernel/ioport.o
CC arch/i386/kernel/ldt.o
CC arch/i386/kernel/setup.o
In file included from include/acpi/acpi.h:62,
from include/linux/acpi.h:37,
from arch/i386/kernel/setup.c:31:include/acpi/acpixf.h:100: warning: 'struct acpi_pointer' declared inside parameter listinclude/acpi/acpixf.h:100: warning: its scope is only this definition or declaration, which is probably not what you want include/acpi/acpixf.h:115: error: expected ')' before 'table_type' make[2]: *** [arch/i386/kernel/setup.o] Błąd 1
make[1]: *** [arch/i386/kernel] Błąd 2
make[1]: Opuszczenie katalogu `/usr/src/linux-rc'
make: *** [debian/stamp-build-kernel] Błąd 2
"Błąd"="Error" (in polish).
Signature · 1 line
Maciej Rutecki <[email protected]>
Len Brown
reviewerQuoted 35 lines · Maciej Rutecki
Andrew Morton napisał(a):
Quoted 8 lines
OK, thanks. That might be due to the time-management updates as well. I'll see if I can reproduce this.
If you're keen, you could test just 2.6.19-rc6+origin.patch+git-acpi.patch
from ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.20-rc6/2.6.20-rc6-mm3/broken-out and see which of these problems remain.I try 2.6.19-rc6 witch origin.patch and git-acpi.patch. This patch didn't add correctly (see patch_output.txt). Also I have compiling error:
AS
arch/i386/kernel/entry.oCC arch/i386/kernel/traps.o CC arch/i386/kernel/irq.o CC arch/i386/kernel/ptrace.o CC arch/i386/kernel/time.o CC arch/i386/kernel/ioport.o CC arch/i386/kernel/ldt.o CC arch/i386/kernel/setup.o In file included from include/acpi/acpi.h:62, from include/linux/acpi.h:37, from arch/i386/kernel/setup.c:31:
include/acpi/acpixf.h:100: warning: 'structacpi_pointer' declared inside parameter listinclude/acpi/acpixf.h:100: warning: its scope is only this definition or declaration, which is probably not what you wantinclude/acpi/acpixf.h:115: error: expected ')' before 'table_type' make[2]: *** [arch/i386/kernel/setup.o] Błąd 1
make[1]: *** [arch/i386/kernel] Błąd 2
make[1]: Opuszczenie katalogu `/usr/src/linux-rc'
make: *** [debian/stamp-build-kernel] Błąd 2
Quoted 1 line
"Błąd"="Error" (in polish).
Note that you can always get the latest ACPI patch and drop it directly onto Linus' tree here:
http://ftp.kernel.org/pub/linux/kernel/people/lenb/acpi/patches/test/2.6.20/
-
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 20 lines · On Wed, 31 Jan 2007 23:10:32 -0500 Len Brown <[email protected]> wrote:
Quoted 20 lines
CC arch/i386/kernel/traps.o CC arch/i386/kernel/irq.o CC arch/i386/kernel/ptrace.o CC arch/i386/kernel/time.o CC arch/i386/kernel/ioport.o CC arch/i386/kernel/ldt.o CC arch/i386/kernel/setup.o In file included from include/acpi/acpi.h:62, from include/linux/acpi.h:37, from arch/i386/kernel/setup.c:31:
include/acpi/acpixf.h:100: warning: 'structacpi_pointer' declared inside parameter listinclude/acpi/acpixf.h:100: warning: its scope is only this definition or declaration, which is probably not what you wantinclude/acpi/acpixf.h:115: error: expected ')' before 'table_type' make[2]: *** [arch/i386/kernel/setup.o] Błąd 1
make[1]: *** [arch/i386/kernel] Błąd 2
make[1]: Opuszczenie katalogu `/usr/src/linux-rc'
make: *** [debian/stamp-build-kernel] Błąd 2
Quoted 4 lines
Quoted 1 line
"Błąd"="Error" (in polish).
Note that you can always get the latest ACPI patch and drop it directly onto Linus' tree here:
http://ftp.kernel.org/pub/linux/kernel/people/lenb/acpi/patches/test/2.6.20/
I'm suspecting that Maciej misapplied the -mm patch somehow:
box:/usr/src/foo> grep acpi_pointer include/acpi/acpixf.h box:/usr/src/foo>
-
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Am 30.01.2007 23:18 schrieb Maciej Rutecki:
Quoted 5 lines
Second problem, power button doesn't work. When I pressed it, I has this error:
ACPI Error (evevent-0305): No installed handler for fixed event [00000002] [20070126]
Same here, minus the message. (Or perhaps I just don't know where to look.) Problem also exists in 2.6.20-rc6-mm2. With 2.6.20-rc6-git1 the power button of this machine works fine.
Signature · 4 lines
Tilman Schmidt E-Mail: [email protected] Bonn, Germany Diese Nachricht besteht zu 100% aus wiederverwerteten Bits. Ungeöffnet mindestens haltbar bis: (siehe Rückseite)
Quoted 11 lines · On Wed, 31 Jan 2007 02:16:43 +0100 Tilman Schmidt <[email protected]> wrote:
Am 30.01.2007 23:18 schrieb Maciej Rutecki:
Quoted 5 lines
Second problem, power button doesn't work. When I pressed it, I has this error:
ACPI Error (evevent-0305): No installed handler for fixed event [00000002] [20070126]
Same here, minus the message. (Or perhaps I just don't know where to look.) Problem also exists in 2.6.20-rc6-mm2. With 2.6.20-rc6-git1 the power button of this machine works fine.
That's significant - in your case at least the 2.6.20-rc6-mm3 ACPI update isn't the cause.
Quoted 10 lines · Andrew Morton
Quoted 7 lines · On Wed, 31 Jan 2007 02:16:43 +0100 Tilman Schmidt <[email protected]> wrote:
Am 30.01.2007 23:18 schrieb Maciej Rutecki:
Quoted 5 lines
Second problem, power button doesn't work. When I pressed it, I has this error:
ACPI Error (evevent-0305): No installed handler for fixed event [00000002] [20070126]
Quoted 6 lines
Quoted 3 lines
Same here, minus the message. (Or perhaps I just don't know where to look.) Problem also exists in 2.6.20-rc6-mm2. With 2.6.20-rc6-git1 the power button of this machine works fine.
That's significant - in your case at least the 2.6.20-rc6-mm3 ACPI update isn't the cause.
Is there anything specific I should test, or Big Bisect time?
Signature · 4 lines
Tilman Schmidt E-Mail: [email protected] Bonn, Germany Diese Nachricht besteht zu 100% aus wiederverwerteten Bits. Ungeöffnet mindestens haltbar bis: (siehe Rückseite)
Quoted 18 lines · Tilman Schmidt
Quoted 16 lines · Andrew Morton
Quoted 12 lines · On Wed, 31 Jan 2007 02:16:43 +0100 Tilman Schmidt <[email protected]> wrote:
Am 30.01.2007 23:18 schrieb Maciej Rutecki:
Quoted 6 lines
Second problem, power button doesn't work. When I pressed it, I has this error:
ACPI Error (evevent-0305): No installed handler for fixed event [00000002] [20070126]
Same here, minus the message. (Or perhaps I just don't know where to look.) Problem also exists in 2.6.20-rc6-mm2. With 2.6.20-rc6-git1 the power button of this machine works fine.
Quoted 7 lines
Quoted 3 lines
That's significant - in your case at least the 2.6.20-rc6-mm3 ACPI update isn't the cause.
Is there anything specific I should test, or Big Bisect time?
This patch should fix the issue...
Regards,
Alex.
Correct id for fixed buttons.ACPI_BUTTON_HID_POWERF was changed, but this change was not propogated to button.c, thus breaking detection of fixed power and sleep buttons.
From: Alexey Starikovskiy <[email protected]>
---
drivers/acpi/button.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/acpi/button.c +1 -1
@@ -75,7 +75,7 @@ static int acpi_button_state_open_fs(strstatic struct acpi_driver acpi_button_driver = { .name =ACPI_BUTTON_DRIVER_NAME , .class =ACPI_BUTTON_CLASS , - .ids ="ACPI_FPB,ACPI_FSB,PNP0C0D,PNP0C0C,PNP0C0E" , + .ids ="button_power,button_sleep,PNP0C0D,PNP0C0C,PNP0C0E" , .ops = { .add = acpi_button_add, .remove = acpi_button_remove,
Alexey Starikovskiy napisał(a):
Quoted 26 lines
Quoted 25 lines · Tilman Schmidt
Quoted 22 lines · Andrew Morton
Quoted 6 lines · On Wed, 31 Jan 2007 02:16:43 +0100 Tilman Schmidt <[email protected]> wrote:
Am 30.01.2007 23:18 schrieb Maciej Rutecki:
Quoted 4 lines
Second problem, power button doesn't work. When I pressed it, I has this
error:Quoted 8 lines
Quoted 3 lines
ACPI Error (evevent-0305): No installed handler for fixed event [00000002] [20070126]
Same here, minus the message. (Or perhaps I just don't know where to look.)
Problem also exists in 2.6.20-rc6-mm2. With 2.6.20-rc6-git1 the power button of this machine works fine.That's significant - in your case at least the 2.6.20-rc6-mm3 ACPI update
isn't the cause.
Quoted 4 lines
Quoted 3 lines
Is there anything specific I should test, or Big Bisect time?
This patch should fix the issue...
Yes, after add this patch power button works fine. Thanks
Signature · 1 line
Maciej Rutecki <[email protected]>
Am 31.01.2007 13:29 schrieb Alexey Starikovskiy:
[...]
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Second problem, power button doesn't work.
[...]
Quoted 1 line
This patch should fix the issue...
It does. Power button works again.
Thanks,
Tilman
Quoted 26 lines
------------------------------------------------------------------------
Correct id for fixed buttons.
ACPI_BUTTON_HID_POWERFwas changed, but this change was not propogated tobutton.c, thus breaking detection of fixed power and sleep buttons.
From: Alexey Starikovskiy <[email protected]>---
drivers/acpi/button.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)drivers/acpi/button.c +1
-1@@ -75,7 +75,7 @@ static int acpi_button_state_open_fs(strstatic struct acpi_driver acpi_button_driver = { .name =ACPI_BUTTON_DRIVER_NAME , .class =ACPI_BUTTON_CLASS , - .ids ="ACPI_FPB,ACPI_FSB,PNP0C0D,PNP0C0C,PNP0C0E" , + .ids ="button_power,button_sleep,PNP0C0D,PNP0C0C,PNP0C0E" , .ops = { .add = acpi_button_add, .remove = acpi_button_remove,
Signature · 4 lines
Tilman Schmidt E-Mail: [email protected] Bonn, Germany Diese Nachricht besteht zu 100% aus wiederverwerteten Bits. Ungeöffnet mindestens haltbar bis: (siehe Rückseite)
Quoted 8 lines · Andrew Morton
Temporarily at
http://userweb.kernel.org/~akpm/2.6.20-rc6-mm3/Will appear later at
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.20-rc6/2.6.20-rc6-mm3/
I jumped from rc2-mm1 to rc6-mm3 and tried dynticks for the first time:
...
Time: acpi_pm clocksource has been installed.
Clocksource tsc unstable (delta = -275154141 ns)
BUG: soft lockup detected on CPU#1! [<c0104dac>] show_trace_log_lvl+0x1a/0x2f [<c010540b>] show_trace+0x12/0x14 [<c010548f>] dump_stack+0x16/0x18 [<c0146e50>] softlockup_tick+0xa7/0xb6 [<c01286c0>] run_local_timers+0x12/0x14 [<c0128a61>] update_process_times+0x3e/0x63 [<c01374c5>] tick_nohz_handler+0x7d/0xe3 [<c01137c2>] smp_apic_timer_interrupt+0x71/0x83 [<c01048f4>] apic_timer_interrupt+0x28/0x30 [<c013709e>] tick_broadcast_oneshot_control+0x12/0xc8 [<c0136a58>] tick_notify+0x1cd/0x241 [<c012bd4e>] notifier_call_chain+0x2b/0x55 [<c012bde2>] __raw_notifier_call_chain+0x19/0x1e [<c012be01>] raw_notifier_call_chain+0x1a/0x1c [<c01364ea>] clockevents_do_notify+0x11/0x13 [<c013672d>] clockevents_notify+0x1c/0x53 [<f8f7b5cb>] acpi_state_timer_broadcast+0x2e/0x31 [processor] [<f8f7c12f>] acpi_processor_idle+0x276/0x40b [processor] [<c0102435>] cpu_idle+0xad/0xd3 [<c0112975>] start_secondary+0x32b/0x333 [<00000000>] run_init_process+0x3fefed10/0x19 =======================
Full dmesg and config:
http://oioio.altervista.org/linux/nohz_soft-lockup.dmesg
http://oioio.altervista.org/linux/config-2.6.20-rc6-mm3-1
As a side note the process becomes slower and slower as it proceeds, it's definitely noticeable during my iptables rules setup (nothing that complex, just default policies and subnet/lan accept rules). Building with NO_HZ=n right now.
Signature · 2 lines
mattia :wq!
Quoted 39 lines · Mattia Dongili
Quoted 8 lines · Andrew Morton
Temporarily at
http://userweb.kernel.org/~akpm/2.6.20-rc6-mm3/Will appear later at
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.20-rc6/2.6.20-rc6-mm3/I jumped from rc2-mm1 to rc6-mm3 and tried dynticks for the first time:
...
Time:acpi_pmclocksource has been installed.
Clocksource tsc unstable (delta = -275154141 ns)BUG: soft lockup detected on CPU#1! [<c0104dac>] show_trace_log_lvl+0x1a/0x2f [<c010540b>] show_trace+0x12/0x14 [<c010548f>] dump_stack+0x16/0x18 [<c0146e50>] softlockup_tick+0xa7/0xb6 [<c01286c0>] run_local_timers+0x12/0x14 [<c0128a61>] update_process_times+0x3e/0x63 [<c01374c5>] tick_nohz_handler+0x7d/0xe3 [<c01137c2>] smp_apic_timer_interrupt+0x71/0x83 [<c01048f4>] apic_timer_interrupt+0x28/0x30 [<c013709e>] tick_broadcast_oneshot_control+0x12/0xc8 [<c0136a58>] tick_notify+0x1cd/0x241 [<c012bd4e>] notifier_call_chain+0x2b/0x55 [<c012bde2>] __raw_notifier_call_chain+0x19/0x1e [<c012be01>] raw_notifier_call_chain+0x1a/0x1c [<c01364ea>] clockevents_do_notify+0x11/0x13 [<c013672d>] clockevents_notify+0x1c/0x53 [<f8f7b5cb>] acpi_state_timer_broadcast+0x2e/0x31 [processor] [<f8f7c12f>] acpi_processor_idle+0x276/0x40b [processor] [<c0102435>] cpu_idle+0xad/0xd3 [<c0112975>] start_secondary+0x32b/0x333 [<00000000>] run_init_process+0x3fefed10/0x19 =======================
Quoted 8 lines
Full dmesg and config:
http://oioio.altervista.org/linux/nohz_soft-lockup.dmesg
http://oioio.altervista.org/linux/config-2.6.20-rc6-mm3-1As a side note the process becomes slower and slower as it proceeds, it's definitely noticeable during my iptables rules setup (nothing that complex, just default policies and subnet/lan accept rules). Building with NO_HZ=n right now.
yes, slowness is gone. Any useful information I can provide?
Signature · 2 lines
mattia :wq!
Quoted 10 lines · Mattia Dongili
Quoted 8 lines
Full dmesg and config:
http://oioio.altervista.org/linux/nohz_soft-lockup.dmesg
http://oioio.altervista.org/linux/config-2.6.20-rc6-mm3-1As a side note the process becomes slower and slower as it proceeds, it's definitely noticeable during my iptables rules setup (nothing that complex, just default policies and subnet/lan accept rules). Building with NO_HZ=n right now.
yes, slowness is gone. Any useful information I can provide?
thanks for reporting this - i'll try your config. There's one fix ontop of -mm3 - see below - but i'm not sure it's related, it addresses resume problems.
Ingo
--- kernel/timer.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
kernel/timer.c +3 -2
@@ -1120,8 +1120,9 @@ static int timekeeping_resume(struct sysif (now && (now > timekeeping_suspend_time)) {unsigned long sleep_length = now - timekeeping_suspend_time; + xtime.tv_sec += sleep_length; - jiffies_64 += (u64 )sleep_length *HZ ; + wall_to_monotonic.tv_sec -= sleep_length; }/* re-base the last cycle value */ clock->cycle_last =clocksource_read (clock);
@@ -1130,7 +1131,7 @@ static int timekeeping_resume(struct syswarp_check_clock_was_changed ();write_sequnlock_irqrestore (&xtime_lock, flags); -clockevents_notify (CLOCK_EVT_NOTIFY_RESUME ,NULL ); +touch_softlockup_watchdog ();/* Resume hrtimers */ clock_was_set ();
Quoted 1 line · Mattia Dongili
yes, slowness is gone. Any useful information I can provide?
Can you please try with CONFIG_ACPI_PROCESSOR=y instead of =m ? This should make the slowness go away too.
I think I know what happens. I try to reproduce with CONFIG_ACPI_PROCESSOR=m.
tglx
Quoted 8 lines · Thomas Gleixner
Quoted 1 line · Mattia Dongili
yes, slowness is gone. Any useful information I can provide?
Can you please try with
CONFIG_ACPI_PROCESSOR=yinstead of =m ? This should make the slowness go away too.I think I know what happens. I try to reproduce with
CONFIG_ACPI_PROCESSOR=m.
Hmm. Not reproducible on my jinxed Sony.
It might be helpful if you could try with your original config again. Please enable printk timestamps and SysRq. Once the slowness kicks in please issue a SysRq-Q, so we can look at the internal state of the tick code.
Thanks,
tglx
Quoted 10 lines · Thomas Gleixner
Quoted 8 lines · Thomas Gleixner
Quoted 1 line · Mattia Dongili
yes, slowness is gone. Any useful information I can provide?
Can you please try with
CONFIG_ACPI_PROCESSOR=yinstead of =m ? This should make the slowness go away too.I think I know what happens. I try to reproduce with
CONFIG_ACPI_PROCESSOR=m.
Quoted 6 lines
Hmm. Not reproducible on my jinxed Sony.
It might be helpful if you could try with your original config again. Please enable printk timestamps and SysRq. Once the slowness kicks in please issue a SysRq-Q, so we can look at the internal state of the tick code.
dmesg is below. I need to say that the printk times are bogus wrt the actual time passing and at one point I was sick waiting and killed all tasks. Ah, I have Ingo's resume-fix patch applied here.
I also played a little with (date; sleep 1; date):
Thu Feb 1 21:56:16 CET 2007
Thu Feb 1 21:56:17 CET 2007
Thu Feb 1 21:57:01 CET 2007
Thu Feb 1 21:57:05 CET 2007
Thu Feb 1 21:57:11 CET 2007
Thu Feb 1 21:57:15 CET 2007
Thu Feb 1 21:57:21 CET 2007
Thu Feb 1 21:57:25 CET 2007
dmesg:
[ 0.000000] Linux version 2.6.20-rc6-mm3-1 (mattia@tadamune) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #7 SMP Thu Feb 1 21:44:52 CET 2007 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] sanitize start [ 0.000000] sanitize end [ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2 [ 0.000000] copy_e820_map() start: 00000000000dc000 size: 0000000000024000 end: 0000000000100000 type: 2 [ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000003fd70000 end: 000000003fe70000 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000003fe70000 size: 0000000000090000 end: 000000003ff00000 type: 4 [ 0.000000] copy_e820_map() start: 000000003ff00000 size: 0000000000100000 end: 0000000040000000 type: 2 [ 0.000000] copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2 [ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2 [ 0.000000] copy_e820_map() start: 00000000fed14000 size: 0000000000006000 end: 00000000fed1a000 type: 2 [ 0.000000] copy_e820_map() start: 00000000fed1c000 size: 0000000000074000 end: 00000000fed90000 type: 2 [ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2 [ 0.000000] copy_e820_map() start: 00000000ff000000 size: 0000000001000000 end: 0000000100000000 type: 2 [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fe70000 (usable) [ 0.000000] BIOS-e820: 000000003fe70000 - 000000003ff00000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] 126MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f6480 [ 0.000000] Entering add_active_range(0, 0, 261744) 0 entries of 256 used [ 0.000000] sizeof(struct page) = 32 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 261744 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 261744 [ 0.000000] On node 0 totalpages: 261744 [ 0.000000] Node 0 memmap at 0xc1000000 size 8388608 first pfn 0xc1000000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 252 pages used for memmap [ 0.000000] HighMem zone: 32116 pages, LIFO batch:7 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP @ 0x000f63b0/0x0014 (v000 PTLTD ) [ 0.000000] ACPI: RSDT @ 0x3fe764ef/0x0048 (v001 Sony N0 0x20060710 PTL 0x00000000) [ 0.000000] ACPI: FACP @ 0x3fe7ddde/0x0084 (v002 Sony N0 0x20060710 PTL 0x0000005A) [ 0.000000] ACPI: DSDT @ 0x3fe77e33/0x5FAB (v001 Sony N0 0x20060710 PTL 0x0100000E) [ 0.000000] ACPI: FACS @ 0x3fe7efc0/0x0040 [ 0.000000] ACPI: APIC @ 0x3fe7de62/0x0068 (v001 Sony N0 0x20060710 PTL 0x0000005A) [ 0.000000] ACPI: BOOT @ 0x3fe7dfd8/0x0028 (v001 Sony N0 0x20060710 PTL 0x00000001) [ 0.000000] ACPI: MCFG @ 0x3fe7df02/0x003C (v001 Sony N0 0x20060710 PTL 0x0000005A) [ 0.000000] ACPI: TCPA @ 0x3fe7df3e/0x0032 (v001 Sony N0 0x20060710 PTL 0x00005A52) [ 0.000000] ACPI: APIC @ 0x3fe7df70/0x0068 (v001 Sony N0 0x20060710 PTL 0x00000000) [ 0.000000] ACPI: SSDT @ 0x3fe776b1/0x077E (v001 Sony N0 0x20060710 PTL 0x20050624) [ 0.000000] ACPI: SSDT @ 0x3fe76ee6/0x07CB (v001 Sony N0 0x20060710 PTL 0x20050624) [ 0.000000] ACPI: SSDT @ 0x3fe76537/0x04E2 (v001 Sony N0 0x20060710 PTL 0x20050624) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) [ 0.000000] Detected 1833.684 MHz processor. [ 12.860547] Built 1 zonelists. Total pages: 259700 [ 12.860552] Kernel command line: root=/dev/sda3 ro vga=extended resume=/dev/sda5 [ 12.860833] mapped APIC to ffffd000 (fee00000) [ 12.860837] mapped IOAPIC to ffffc000 (fec00000) [ 12.860842] Enabling fast FPU save and restore... done. [ 12.860846] Enabling unmasked SIMD FPU exception support... done. [ 12.860855] Initializing CPU#0 [ 12.860921] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 12.866401] Console: colour VGA+ 80x50 [ 12.872547] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 12.873043] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 12.910547] Memory: 1034188k/1046976k available (1864k kernel code, 12244k reserved, 687k data, 212k init, 129472k highmem) [ 12.910661] virtual kernel memory layout: [ 12.910663] fixmap : 0xfff9d000 - 0xfffff000 ( 392 kB) [ 12.910665] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 12.910667] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 12.910669] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 12.910671] .init : 0xc0384000 - 0xc03b9000 ( 212 kB) [ 12.910673] .data : 0xc02d23c1 - 0xc037dff4 ( 687 kB) [ 12.910675] .text : 0xc0100000 - 0xc02d23c1 (1864 kB) [ 12.911309] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 12.991557] Calibrating delay using timer specific routine.. 3671.96 BogoMIPS (lpj=7343936) [ 12.991768] Security Framework v1.0.0 initialized [ 12.991854] Capability LSM initialized [ 12.991949] Mount-cache hash table entries: 512 [ 12.992156] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 [ 12.992168] monitor/mwait feature present. [ 12.992248] using mwait in idle threads. [ 12.992330] CPU: L1 I cache: 32K, L1 D cache: 32K [ 12.992473] CPU: L2 cache: 2048K [ 12.992553] CPU: Physical Processor ID: 0 [ 12.992632] CPU: Processor Core ID: 0 [ 12.992712] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 [ 12.992723] Intel machine check architecture supported. [ 12.992807] Intel machine check reporting enabled on CPU#0. [ 12.992892] Compat vDSO mapped to ffffe000. [ 12.992985] Checking 'hlt' instruction... OK. [ 13.007710] SMP alternatives: switching to UP code [ 13.008036] ACPI: Core revision 20070126 [ 13.019260] Parsing all Control Methods: [ 13.019649] Table [DSDT](id 0001) - 923 Objects with 104 Devices 193 Methods 29 Regions [ 13.020057] Parsing all Control Methods: [ 13.020357] Table [SSDT](id 0002) - 13 Objects with 3 Devices 4 Methods 0 Regions [ 13.020770] Parsing all Control Methods: [ 13.021069] Table [SSDT](id 0003) - 14 Objects with 3 Devices 5 Methods 0 Regions [ 13.021485] Parsing all Control Methods: [ 13.021786] Table [SSDT](id 0004) - 13 Objects with 0 Devices 4 Methods 0 Regions [ 13.021954] tbxface-0586 [02] tb_load_namespace : ACPI Tables successfully acquired [ 13.026221] evxfevnt-0091 [02] enable : Transition to ACPI mode successful [ 13.026469] CPU0: Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz stepping 06 [ 13.026695] SMP alternatives: switching to SMP code [ 13.026804] Booting processor 1/1 eip 3000 [ 13.037543] Initializing CPU#1 [ 13.115447] Calibrating delay using timer specific routine.. 3667.23 BogoMIPS (lpj=7334471) [ 13.115456] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 [ 13.115465] monitor/mwait feature present. [ 13.115469] CPU: L1 I cache: 32K, L1 D cache: 32K [ 13.115473] CPU: L2 cache: 2048K [ 13.115476] CPU: Physical Processor ID: 0 [ 13.115478] CPU: Processor Core ID: 1 [ 13.115481] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 [ 13.115489] Intel machine check architecture supported. [ 13.115495] Intel machine check reporting enabled on CPU#1. [ 13.116151] CPU1: Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz stepping 06 [ 13.117084] Total of 2 processors activated (7339.20 BogoMIPS). [ 13.117372] ENABLING IO-APIC IRQs [ 13.117670] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 13.391218] APIC calibration not consistent with PM Timer: 228ms instead of 100ms [ 13.391315] APIC delta adjusted to PM-Timer: 1041737 (2375299) [ 13.499488] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 13.519636] Brought up 2 CPUs [ 13.680727] migration_cost=41 [ 13.681201] NET: Registered protocol family 16 [ 13.681406] ACPI: bus type pci registered [ 13.681497] PCI: Using MMCONFIG [ 13.682561] Setting up standard PCI resources [ 13.689516] evgpeblk-0952 [04] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 [ 13.691115] evgpeblk-1049 [03] ev_initialize_gpe_bloc: Found 8 Wake, Enabled 5 Runtime GPEs in this block [ 13.692639] Completing Region/Field/Buffer/Package initialization:......................................................................... [ 13.700140] Initialized 29/29 Regions 4/4 Fields 29/29 Buffers 11/38 Packages (972 nodes) [ 13.700311] Initializing Device/Processor/Thermal objects by executing _INI methods:... [ 13.702433] Executed 3 _INI methods requiring 2 _STA executions (examined 117 objects) [ 13.702630] ACPI: Interpreter enabled [ 13.702709] ACPI: Using IOAPIC for interrupt routing [ 13.702941] Found System \ [ffffffff] [ 13.703039] Found Processor \_PR_.CPU0 [c1907dd8] [ 13.703120] Found Processor \_PR_.CPU1 [c1907dc4] [ 13.703245] Found Device \_SB_ [c19073c4] [ 13.703349] Found Device \_SB_.LID0 [c190da40] [ 13.703465] Found Device \_SB_.PWRB [c190da04] [ 13.703578] Found Device \_SB_.PCI0 [c190d9a0] [ 13.703700] Found Device \_SB_.PCI0.PDRC [c190d7c0] [ 13.703814] Found Device \_SB_.PCI0.PEGP [c190dfcc] [ 13.703932] Found Device \_SB_.PCI0.GFX0 [c190df90] [ 13.704059] Found Device \_SB_.PCI0.HDEF [c190df68] [ 13.704172] Found Device \_SB_.PCI0.RP01 [c190df04] [ 13.704297] Found Device \_SB_.PCI0.RP01.S1F0 [c190de50] [ 13.704425] Found Device \_SB_.PCI0.RP01.S1F1 [c190ddec] [ 13.704547] Found Device \_SB_.PCI0.RP01.S1F2 [c190dd88] [ 13.704681] Found Device \_SB_.PCI0.RP01.S1F3 [c190dd24] [ 13.704804] Found Device \_SB_.PCI0.RP01.S1F4 [c190dcc0] [ 13.704927] Found Device \_SB_.PCI0.RP01.S1F5 [c190dc5c] [ 13.705052] Found Device \_SB_.PCI0.RP01.S1F6 [c190f748] [ 13.705179] Found Device \_SB_.PCI0.RP01.S1F7 [c190f6e4] [ 13.705297] Found Device \_SB_.PCI0.RP02 [c190f66c] [ 13.705610] Found Device \_SB_.PCI0.RP02.WLAN [c190f5b8] [ 13.705730] Found Device \_SB_.PCI0.RP03 [c190f52c] [ 13.705855] Found Device \_SB_.PCI0.RP03.TLAN [c190f464] [ 13.705969] Found Device \_SB_.PCI0.RP04 [c190f414] [ 13.706094] Found Device \_SB_.PCI0.RP04.DLAN [c190f34c] [ 13.706206] Found Device \_SB_.PCI0.RP04.S4F1 [c190f2e8] [ 13.706323] Found Device \_SB_.PCI0.RP04.S4F2 [c190fc0c] [ 13.706437] Found Device \_SB_.PCI0.RP04.S4F3 [c190fbd0] [ 13.706549] Found Device \_SB_.PCI0.RP04.S4F4 [c190fb94] [ 13.706661] Found Device \_SB_.PCI0.RP04.S4F5 [c190fb58] [ 13.706774] Found Device \_SB_.PCI0.RP04.S4F6 [c190fb1c] [ 13.706887] Found Device \_SB_.PCI0.RP04.S4F7 [c190fae0] [ 13.707010] Found Device \_SB_.PCI0.RP05 [c190faa4] [ 13.707123] Found Device \_SB_.PCI0.RP05.EX2P [c190f9dc] [ 13.707263] Found Device \_SB_.PCI0.RP05.S5F1 [c190f978] [ 13.707373] Found Device \_SB_.PCI0.RP05.S5F2 [c190f93c] [ 13.707483] Found Device \_SB_.PCI0.RP05.S5F3 [c190f900] [ 13.707593] Found Device \_SB_.PCI0.RP05.S5F4 [c190f8c4] [ 13.707707] Found Device \_SB_.PCI0.RP05.S5F5 [c190f888] [ 13.707816] Found Device \_SB_.PCI0.RP05.S5F6 [c190f84c] [ 13.707927] Found Device \_SB_.PCI0.RP05.S5F7 [c190f810] [ 13.708039] Found Device \_SB_.PCI0.RP06 [c190f7d4] [ 13.708167] Found Device \_SB_.PCI0.RP06.S6F0 [c190ffa4] [ 13.708291] Found Device \_SB_.PCI0.RP06.S6F1 [c190ff40] [ 13.708421] Found Device \_SB_.PCI0.RP06.S6F2 [c190fedc] [ 13.708543] Found Device \_SB_.PCI0.RP06.S6F3 [c190fe78] [ 13.708665] Found Device \_SB_.PCI0.RP06.S6F4 [c190fe14] [ 13.708787] Found Device \_SB_.PCI0.RP06.S6F5 [c190fdb0] [ 13.708910] Found Device \_SB_.PCI0.RP06.S6F6 [c190fd4c] [ 13.709032] Found Device \_SB_.PCI0.RP06.S6F7 [c190fce8] [ 13.709168] Found Device \_SB_.PCI0.USB1 [c190fc70] [ 13.709294] Found Device \_SB_.PCI0.USB2 [c1910748] [ 13.709420] Found Device \_SB_.PCI0.USB3 [c19106d0] [ 13.709548] Found Device \_SB_.PCI0.USB4 [c1910658] [ 13.709676] Found Device \_SB_.PCI0.USB7 [c19105e0] [ 13.709790] Found Device \_SB_.PCI0.USB7.HUB7 [c19105b8] [ 13.709908] Found Device \_SB_.PCI0.USB7.HUB7.PRT1 [c1910590] [ 13.710020] Found Device \_SB_.PCI0.USB7.HUB7.PRT2 [c1910568] [ 13.710138] Found Device \_SB_.PCI0.USB7.HUB7.PRT3 [c1910540] [ 13.710251] Found Device \_SB_.PCI0.USB7.HUB7.PRT4 [c1910518] [ 13.710367] Found Device \_SB_.PCI0.USB7.HUB7.PRT5 [c19104f0] [ 13.710480] Found Device \_SB_.PCI0.USB7.HUB7.PRT6 [c19104c8] [ 13.710599] Found Device \_SB_.PCI0.USB7.HUB7.PRT7 [c19104a0] [ 13.710714] Found Device \_SB_.PCI0.USB7.HUB7.PRT8 [c1910478] [ 13.710833] Found Device \_SB_.PCI0.PCIB [c191043c] [ 13.710959] Found Device \_SB_.PCI0.PCIB.SLT0 [c1910414] [ 13.711086] Found Device \_SB_.PCI0.PCIB.LANC [c19103d8] [ 13.711405] Found Device \_SB_.PCI0.PCIB.CRD2 [c191039c] [ 13.711534] Found Device \_SB_.PCI0.PCIB.S294 [c19102c0] [ 13.711647] Found Device \_SB_.PCI0.PCIB.MST2 [c1910bf8] [ 13.711954] Found Device \_SB_.PCI0.PCIB.CRD0 [c1910bd0] [ 13.712076] Found Device \_SB_.PCI0.PCIB.SD94 [c1910af4] [ 13.712193] Found Device \_SB_.PCI0.PCIB.MMST [c1910acc] [ 13.712313] Found Device \_SB_.PCI0.AUD0 [c1910a90] [ 13.712431] Found Device \_SB_.PCI0.MODM [c1910a68] [ 13.712550] Found Device \_SB_.PCI0.LPCB [c1910a40] [ 13.712938] Found Device \_SB_.PCI0.LPCB.LNKA [c19108ec] [ 13.713297] Found Device \_SB_.PCI0.LPCB.LNKB [c191084c] [ 13.713654] Found Device \_SB_.PCI0.LPCB.LNKC [c19107ac] [ 13.714009] Found Device \_SB_.PCI0.LPCB.LNKD [c1910f90] [ 13.714372] Found Device \_SB_.PCI0.LPCB.LNKE [c1910ef0] [ 13.714729] Found Device \_SB_.PCI0.LPCB.LNKF [c1910e50] [ 13.715087] Found Device \_SB_.PCI0.LPCB.LNKG [c1910db0] [ 13.715470] Found Device \_SB_.PCI0.LPCB.LNKH [c1910d10] [ 13.715604] Found Device \_SB_.PCI0.LPCB.EC0_ [c1910c70] [ 13.720373] Found Device \_SB_.PCI0.LPCB.EC0_.BAT1 [c1911a18] [ 13.720665] Found Device \_SB_.PCI0.LPCB.EC0_.ACAD [c1911950] [ 13.720775] Found Device \_SB_.PCI0.LPCB.DMAC [c19118ec] [ 13.720886] Found Device \_SB_.PCI0.LPCB.FWHD [c19118b0] [ 13.721169] Found Device \_SB_.PCI0.LPCB.IPIC [c19117fc] [ 13.721277] Found Device \_SB_.PCI0.LPCB.MATH [c19117c0] [ 13.721386] Found Device \_SB_.PCI0.LPCB.LDRC [c1911784] [ 13.721503] Found Device \_SB_.PCI0.LPCB.RTC_ [c1911f90] [ 13.721612] Found Device \_SB_.PCI0.LPCB.TIMR [c1911f54] [ 13.721945] Found Device \_SB_.PCI0.LPCB.TPM_ [c1911f18] [ 13.726532] Found Device \_SB_.PCI0.LPCB.SPIC [c1911ea0] [ 13.726651] Found Device \_SB_.PCI0.LPCB.SNC_ [c1911dd8] [ 13.726770] Found Device \_SB_.PCI0.LPCB.PS2K [c1913748] [ 13.726886] Found Device \_SB_.PCI0.LPCB.PS2M [c191370c] [ 13.727022] Found Device \_SB_.PCI0.PATA [c19136bc] [ 13.727180] Found Device \_SB_.PCI0.PATA.PRID [c19135a4] [ 13.727296] Found Device \_SB_.PCI0.PATA.PRID.P_D0 [c1913554] [ 13.727409] Found Device \_SB_.PCI0.PATA.PRID.P_D1 [c1913518] [ 13.727562] Found Device \_SB_.PCI0.SATA [c191348c] [ 13.727695] Found Device \_SB_.PCI0.SATA.PRID [c19139dc] [ 13.727809] Found Device \_SB_.PCI0.SATA.PRID.P_D0 [c191398c] [ 13.727922] Found Device \_SB_.PCI0.SATA.PRID.P_D1 [c1913950] [ 13.728039] Found Device \_SB_.PCI0.SATA.SECD [c19138d8] [ 13.728155] Found Device \_SB_.PCI0.SATA.SECD.S_D0 [c1913888] [ 13.728270] Found Device \_SB_.PCI0.SATA.SECD.S_D1 [c1913838] [ 13.728394] Found Device \_SB_.PCI0.SBUS [c1913310] [ 13.730742] Found Thermal Zone \_TZ_ [c190739c] [ 13.730830] Found Thermal Zone \_TZ_.ATF0 [c190d4a0] [ 13.730919] Found Thermal Zone \_TZ_.DTS0 [c190d3ec] [ 13.731002] Found Thermal Zone \_TZ_.DTS1 [c190d34c] [ 13.731623] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 13.732447] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 13.732533] PCI quirk: region 1180-11bf claimed by ICH6 GPIO [ 13.732909] Boot video device is 0000:01:00.0 [ 13.734152] PCI: Transparent bridge - 0000:00:1e.0 [ 13.734332] PCI: Bus #0a (-#0d) is hidden behind transparent bridge #09 (-#0a) (try 'pci=assign-busses') [ 13.738627] Please report the result to linux-kernel to fix this permanently [ 13.738801] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 13.739824] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] [ 13.740273] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 13.740729] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 13.741160] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 13.741590] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 13.742082] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 13.754709] ACPI: PCI Interrupt Link [LNKA] (IRQs 10) *5 [ 13.755351] ACPI: PCI Interrupt Link [LNKB] (IRQs *10) [ 13.755921] ACPI: PCI Interrupt Link [LNKC] (IRQs *10) [ 13.756494] ACPI: PCI Interrupt Link [LNKD] (IRQs *10) [ 13.757063] ACPI: PCI Interrupt Link [LNKE] (IRQs 10) *0, disabled. [ 13.757761] ACPI: PCI Interrupt Link [LNKF] (IRQs *10) [ 13.758330] ACPI: PCI Interrupt Link [LNKG] (IRQs *10) [ 13.758900] ACPI: PCI Interrupt Link [LNKH] (IRQs *10) [ 13.759426] Linux Plug and Play Support v0.97 (c) Adam Belay [ 13.759523] pnp: PnP ACPI init [ 13.765452] pnp: PnP ACPI: found 11 devices [ 13.765538] PnPBIOS: Disabled by ACPI PNP [ 13.765816] SCSI subsystem initialized [ 13.765948] libata version 2.00 loaded. [ 13.766043] PCI: Using ACPI for IRQ routing [ 13.766125] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 13.766405] NET: Registered protocol family 8 [ 13.766486] NET: Registered protocol family 20 [ 13.766632] pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved [ 13.766730] pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved [ 13.766826] pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved [ 13.766923] pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved [ 13.767477] PCI: Failed to allocate mem resource #6:20000@d0000000 for 0000:01:00.0 [ 13.767574] PCI: Bridge: 0000:00:01.0 [ 13.767653] IO window: disabled. [ 13.767734] MEM window: dc000000-ddffffff [ 13.767815] PREFETCH window: c0000000-cfffffff [ 13.767897] PCI: Bridge: 0000:00:1c.0 [ 13.767978] IO window: 2000-2fff [ 13.768061] MEM window: d6000000-d7ffffff [ 13.768145] PREFETCH window: d0000000-d1ffffff [ 13.768230] PCI: Bridge: 0000:00:1c.1 [ 13.768308] IO window: disabled. [ 13.768392] MEM window: de100000-de1fffff [ 13.768474] PREFETCH window: disabled. [ 13.768558] PCI: Bridge: 0000:00:1c.2 [ 13.768639] IO window: 3000-3fff [ 13.768723] MEM window: d8000000-d9ffffff [ 13.768806] PREFETCH window: d2000000-d3ffffff [ 13.768890] PCI: Bridge: 0000:00:1c.3 [ 13.768970] IO window: 4000-4fff [ 13.769054] MEM window: da000000-dbffffff [ 13.769136] PREFETCH window: d4000000-d5ffffff [ 13.769229] PCI: Bus 10, cardbus bridge: 0000:09:04.0 [ 13.769311] IO window: 00005000-000050ff [ 13.769395] IO window: 00005400-000054ff [ 13.770145] PREFETCH window: 50000000-53ffffff [ 13.770230] MEM window: 54000000-57ffffff [ 13.770313] PCI: Bridge: 0000:00:1e.0 [ 13.770395] IO window: 5000-5fff [ 13.770478] MEM window: de000000-de0fffff [ 13.770561] PREFETCH window: 50000000-53ffffff [ 13.770656] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 13.770817] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 13.770840] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 13.771002] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 13.771028] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 13.771194] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 13.771219] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 13.771381] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 13.771407] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 [ 13.771568] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 13.771583] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 13.771613] ACPI: PCI Interrupt 0000:09:04.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 13.771810] NET: Registered protocol family 2 [ 13.815073] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 13.815252] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 13.816032] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 13.816454] TCP: Hash tables configured (established 131072 bind 65536) [ 13.816538] TCP reno registered [ 13.827346] Simple Boot Flag at 0x37 set to 0x1 [ 13.828100] audit: initializing netlink socket (disabled) [ 13.828197] audit(1170362897.500:1): initialized [ 13.828389] highmem bounce pool size: 64 pages [ 13.828657] JFS: nTxBlock = 8080, nTxLock = 64646 [ 13.832640] io scheduler noop registered [ 13.832789] io scheduler anticipatory registered [ 13.832932] io scheduler deadline registered [ 13.833091] io scheduler cfq registered (default) [ 13.833680] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 13.833707] assign_interrupt_mode Found MSI capability [ 13.833822] Allocate Port Service[0000:00:01.0:pcie00] [ 13.833882] Allocate Port Service[0000:00:01.0:pcie03] [ 13.833975] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 13.834035] assign_interrupt_mode Found MSI capability [ 13.834158] Allocate Port Service[0000:00:1c.0:pcie00] [ 13.834210] Allocate Port Service[0000:00:1c.0:pcie02] [ 13.834257] Allocate Port Service[0000:00:1c.0:pcie03] [ 13.834400] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 13.834459] assign_interrupt_mode Found MSI capability [ 13.834582] Allocate Port Service[0000:00:1c.1:pcie00] [ 13.834637] Allocate Port Service[0000:00:1c.1:pcie02] [ 13.834685] Allocate Port Service[0000:00:1c.1:pcie03] [ 13.834825] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 13.834885] assign_interrupt_mode Found MSI capability [ 13.835007] Allocate Port Service[0000:00:1c.2:pcie00] [ 13.835061] Allocate Port Service[0000:00:1c.2:pcie02] [ 13.835109] Allocate Port Service[0000:00:1c.2:pcie03] [ 13.835253] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 13.835312] assign_interrupt_mode Found MSI capability [ 13.835444] Allocate Port Service[0000:00:1c.3:pcie00] [ 13.835498] Allocate Port Service[0000:00:1c.3:pcie02] [ 13.835544] Allocate Port Service[0000:00:1c.3:pcie03] [ 13.836956] ACPI: SSDT @ 0x3fe76cb5/0x01A8 (v001 Sony N0 0x20060710 PTL 0x20050624) [ 13.837296] Parsing all Control Methods: [ 13.837698] Table [SSDT](id 0075) - 5 Objects with 0 Devices 3 Methods 0 Regions [ 13.838228] ACPI: SSDT @ 0x3fe76a19/0x0217 (v001 Sony N0 0x20060710 PTL 0x20050624) [ 13.838497] Parsing all Control Methods: [ 13.838890] Table [SSDT](id 0076) - 1 Objects with 0 Devices 1 Methods 0 Regions [ 13.840519] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 13.840857] ACPI: Processor [CPU0] (supports 8 throttling states) [ 13.842100] ACPI: SSDT @ 0x3fe76e5d/0x0089 (v001 Sony N0 0x20060710 PTL 0x20050624) [ 13.842400] Parsing all Control Methods: [ 13.842796] Table [SSDT](id 007B) - 3 Objects with 0 Devices 3 Methods 0 Regions [ 13.843323] ACPI: SSDT @ 0x3fe76c30/0x0085 (v001 Sony N0 0x20060710 PTL 0x20050624) [ 13.843593] Parsing all Control Methods: [ 13.843986] Table [SSDT](id 007C) - 1 Objects with 0 Devices 1 Methods 0 Regions [ 13.845266] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 13.845602] ACPI: Processor [CPU1] (supports 8 throttling states) [ 13.851205] isapnp: Scanning for PnP cards... [ 14.205898] isapnp: No Plug & Play device found [ 14.212395] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled [ 14.214908] RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize [ 14.215158] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 14.215244] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 14.215381] ICH7: IDE controller at PCI slot 0000:00:1f.1 [ 14.215476] ACPI: PCI Interrupt 0000:00:1f.1[B] -> GSI 22 (level, low) -> IRQ 21 [ 14.215640] ICH7: chipset revision 2 [ 14.215719] ICH7: not 100% native mode: will probe irqs later [ 14.215810] ide0: BM-DMA at 0x1880-0x1887, BIOS settings: hda:DMA, hdb:pio [ 14.216042] Probing IDE interface ide0... [ 14.247273] hda: MATSHITADVD-RAM UJ-842S, ATAPI CD/DVD-ROM drive [ 14.257478] hda: selected mode 0x42 [ 14.257838] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 14.259143] ata_piix 0000:00:1f.2: version 2.00ac7 [ 14.259152] ata_piix 0000:00:1f.2: MAP [ P0 P2 XX XX ] [ 14.259546] ata_piix 0000:00:1f.2: invalid MAP value 0 [ 14.268138] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 22 (level, low) -> IRQ 21 [ 14.268319] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 14.268399] ata1: SATA max UDMA/133 cmd 0x18C8 ctl 0x18AE bmdma 0x18B0 irq 21 [ 14.268517] ata2: SATA max UDMA/133 cmd 0x18C0 ctl 0x18AA bmdma 0x18B8 irq 21 [ 14.268617] scsi0 : ata_piix [ 14.291044] ata1.00: ATA-6, max UDMA/100, 195371568 sectors: LBA48 NCQ (depth 0/32) [ 14.291144] ata1.00: ata1: dev 0 multi count 16 [ 14.308400] ata1.00: configured for UDMA/100 [ 14.308493] scsi1 : ata_piix [ 14.324766] ATA: abnormal status 0x7F on port 0x18C7 [ 14.325004] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1032GS AS02 PQ: 0 ANSI: 5 [ 14.325349] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB) [ 14.325446] sda: Write Protect is off [ 14.325526] sda: Mode Sense: 00 3a 00 00 [ 14.325552] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 14.325707] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB) [ 14.325803] sda: Write Protect is off [ 14.330056] sda: Mode Sense: 00 3a 00 00 [ 14.330082] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 14.330180] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > [ 14.413802] sd 0:0:0:0: Attached scsi disk sda [ 14.414191] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 14.416962] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 14.417047] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 14.417257] mice: PS/2 mouse device common for all mice [ 14.447550] TCP bic registered [ 14.447651] NET: Registered protocol family 1 [ 14.447735] NET: Registered protocol family 17 [ 14.447954] Starting balanced_irq [ 14.448041] Using IPI No-Shortcut mode [ 14.448611] ACPI: (supports S0 S3 S4 S5) [ 14.449145] Time: acpi_pm clocksource has been installed. [ 14.449254] Switched to NOHz mode on CPU #1 [ 14.449258] Switched to NOHz mode on CPU #0 [ 14.454580] input: AT Translated Set 2 keyboard as /class/input/input0 [ 14.551764] VFS: Mounted root (jfs filesystem) readonly. [ 14.551963] Freeing unused kernel memory: 212k freed [ 16.949719] usbcore: registered new interface driver usbfs [ 16.949847] usbcore: registered new interface driver hub [ 16.950005] usbcore: registered new device driver usb [ 17.025582] USB Universal Host Controller Interface driver v3.0 [ 17.025734] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 17.025907] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 17.025913] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 17.026136] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 17.026270] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001800 [ 17.026410] usb usb1: new device found, idVendor=0000, idProduct=0000 [ 17.026496] usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 [ 17.026582] usb usb1: Product: UHCI Host Controller [ 17.026665] usb usb1: Manufacturer: Linux 2.6.20-rc6-mm3-1 uhci_hcd [ 17.026752] usb usb1: SerialNumber: 0000:00:1d.0 [ 17.026934] usb usb1: configuration #1 chosen from 1 choice [ 17.027052] hub 1-0:1.0: USB hub found [ 17.027138] hub 1-0:1.0: 2 ports detected [ 17.133199] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 17.133376] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 17.133382] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 17.133499] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 17.133632] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820 [ 17.133774] usb usb2: new device found, idVendor=0000, idProduct=0000 [ 17.133861] usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 [ 17.133949] usb usb2: Product: UHCI Host Controller [ 17.134035] usb usb2: Manufacturer: Linux 2.6.20-rc6-mm3-1 uhci_hcd [ 17.134120] usb usb2: SerialNumber: 0000:00:1d.1 [ 17.134309] usb usb2: configuration #1 chosen from 1 choice [ 17.134439] hub 2-0:1.0: USB hub found [ 17.134528] hub 2-0:1.0: 2 ports detected [ 17.169098] input: PS/2 Mouse as /class/input/input1 [ 17.182324] Clocksource tsc unstable (delta = -244624983 ns) [ 17.182432] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 19 (level, low) -> IRQ 19 [ 17.182640] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 17.182646] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 17.182757] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 17.182885] uhci_hcd 0000:00:1d.2: irq 19, io base 0x00001840 [ 17.183021] usb usb3: new device found, idVendor=0000, idProduct=0000 [ 17.183109] usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 [ 17.183192] usb usb3: Product: UHCI Host Controller [ 17.183278] usb usb3: Manufacturer: Linux 2.6.20-rc6-mm3-1 uhci_hcd [ 17.183363] usb usb3: SerialNumber: 0000:00:1d.2 [ 17.183524] usb usb3: configuration #1 chosen from 1 choice [ 17.183642] hub 3-0:1.0: USB hub found [ 17.183729] hub 3-0:1.0: 2 ports detected [ 17.184537] input: AlpsPS/2 ALPS GlidePoint as /class/input/input2 [ 17.201923] input: PC Speaker as /class/input/input3 [ 17.351947] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 19 (level, low) -> IRQ 19 [ 17.352123] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 17.352129] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 17.352292] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 17.352420] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001860 [ 17.352558] usb usb4: new device found, idVendor=0000, idProduct=0000 [ 17.352643] usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1 [ 17.352728] usb usb4: Product: UHCI Host Controller [ 17.352810] usb usb4: Manufacturer: Linux 2.6.20-rc6-mm3-1 uhci_hcd [ 17.352893] usb usb4: SerialNumber: 0000:00:1d.3 [ 17.353055] usb usb4: configuration #1 chosen from 1 choice [ 17.353174] hub 4-0:1.0: USB hub found [ 17.353261] hub 4-0:1.0: 2 ports detected [ 17.365615] Linux agpgart interface v0.102 (c) Dave Jones [ 17.421624] usb 2-2: new full speed USB device using uhci_hcd and address 2 [ 17.625824] agpgart: Detected an Intel 945GM Chipset. [ 17.646833] agpgart: AGP aperture is 256M @ 0x0 [ 17.678432] usb 2-2: new device found, idVendor=054c, idProduct=0281 [ 17.678521] usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=3 [ 17.678606] usb 2-2: Product: UMH-U09 [ 17.678685] usb 2-2: Manufacturer: Sony [ 17.678765] usb 2-2: SerialNumber: F000001C9B3A [ 17.678951] usb 2-2: configuration #1 chosen from 1 choice [ 17.701690] ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 17.701874] PCI: Setting latency timer of device 0000:07:00.0 to 64 [ 17.701936] sky2 v1.10 addr 0xd8000000 irq 18 Yukon-FE (0xb7) rev 1 [ 17.702173] sky2 eth0: addr 00:13:a9:41:76:84 [ 17.707673] ACPI: PCI Interrupt 0000:09:04.2[C] -> GSI 22 (level, low) -> IRQ 21 [ 17.729071] Yenta: CardBus bridge found at 0000:09:04.0 [104d:81e6] [ 17.729181] Yenta: Using CSCINT to route CSC interrupts to PCI [ 17.729263] Yenta: Routing CardBus interrupts to PCI [ 17.729349] Yenta TI: socket 0000:09:04.0, mfunc 0x01a21b22, devctl 0x64 [ 17.738441] Real Time Clock Driver v1.12ac [ 17.798450] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 22 [ 17.798629] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 17.798635] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 17.798751] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 17.798884] ehci_hcd 0000:00:1d.7: debug port 1 [ 17.798970] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 17.798985] ehci_hcd 0000:00:1d.7: irq 22, io mem 0xde404000 [ 17.802953] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 17.803072] usb usb5: new device found, idVendor=0000, idProduct=0000 [ 17.803156] usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1 [ 17.803240] usb usb5: Product: EHCI Host Controller [ 17.803321] usb usb5: Manufacturer: Linux 2.6.20-rc6-mm3-1 ehci_hcd [ 17.803403] usb usb5: SerialNumber: 0000:00:1d.7 [ 17.803578] usb usb5: configuration #1 chosen from 1 choice [ 17.803706] hub 5-0:1.0: USB hub found [ 17.803792] hub 5-0:1.0: 8 ports detected [ 17.852077] tpm_inf_pnp 00:07: Found TPM with ID IFX0102 [ 17.852233] tpm_inf_pnp 00:07: TPM found: config base 0x2e, io base 0x1670, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2) [ 17.886026] hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) [ 17.886635] Uniform CD-ROM driver Revision: 3.20 [ 17.937681] Initializing USB Mass Storage driver... [ 17.950206] Yenta: ISA IRQ mask 0x0cf8, PCI irq 20 [ 17.950292] Socket status: 30000006 [ 17.950373] Yenta: Raising subordinate bus# of parent bus (#09) from #0a to #0d [ 17.950473] pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff [ 17.950558] cs: IO port probe 0x5000-0x5fff: clean. [ 17.951186] pcmcia: parent PCI bridge Memory window: 0xde000000 - 0xde0fffff [ 17.951271] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff [ 18.146142] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 23 [ 18.146330] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 18.226954] scsi2 : SCSI emulation for USB Mass Storage devices [ 18.227112] usb-storage: device found at 2 [ 18.227115] usb-storage: waiting for device to settle before scanning [ 18.265723] cs: IO port probe 0x100-0x3af: clean. [ 18.268345] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 18.269811] cs: IO port probe 0x820-0x8ff: clean. [ 18.270818] cs: IO port probe 0xc00-0xcf7: clean. [ 18.272086] cs: IO port probe 0xa00-0xaff: clean. [ 18.335076] usb 5-4: new high speed USB device using ehci_hcd and address 2 [ 18.465179] usb 5-4: new device found, idVendor=054c, idProduct=0281 [ 18.469499] usb 5-4: new device strings: Mfr=1, Product=2, SerialNumber=3 [ 18.469633] usb 5-4: Product: UMH-U09 [ 18.469713] usb 5-4: Manufacturer: Sony [ 18.469792] usb 5-4: SerialNumber: F000001C9B3A [ 18.469990] usb 5-4: configuration #1 chosen from 1 choice [ 18.509769] usb 5-6: new high speed USB device using ehci_hcd and address 4 [ 18.549637] usb 5-6: new device found, idVendor=05ca, idProduct=1830 [ 18.549724] usb 5-6: new device strings: Mfr=0, Product=0, SerialNumber=0 [ 18.549919] usb 5-6: configuration #1 chosen from 1 choice [ 18.599659] usb 2-2: USB disconnect, address 2 [ 18.599752] scsi3 : SCSI emulation for USB Mass Storage devices [ 18.599965] usbcore: registered new interface driver usb-storage [ 18.600054] USB Mass Storage support registered. [ 18.600587] usb-storage: device found at 2 [ 18.600590] usb-storage: waiting for device to settle before scanning [ 18.709644] usb 4-1: new low speed USB device using uhci_hcd and address 2 [ 18.715800] usb 4-1: new device found, idVendor=054c, idProduct=01bb [ 18.715887] usb 4-1: new device strings: Mfr=0, Product=0, SerialNumber=0 [ 18.716080] usb 4-1: configuration #1 chosen from 1 choice [ 18.956557] usb 4-2: new full speed USB device using uhci_hcd and address 3 [ 18.981016] usb 4-2: new device found, idVendor=044e, idProduct=300c [ 18.981105] usb 4-2: new device strings: Mfr=1, Product=2, SerialNumber=0 [ 18.981189] usb 4-2: Product: UGX [ 18.981268] usb 4-2: Manufacturer: ALPS [ 18.981463] usb 4-2: configuration #1 chosen from 1 choice [ 19.056548] Bluetooth: Core ver 2.11 [ 19.056693] NET: Registered protocol family 31 [ 19.056775] Bluetooth: HCI device and connection manager initialized [ 19.056862] Bluetooth: HCI socket layer initialized [ 19.079288] Adding 979924k swap on /dev/sda5. Priority:-1 extents:1 across:979924k [ 19.093130] Bluetooth: HCI USB driver ver 2.9 [ 19.220257] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 19.391588] usb 3-1: new device found, idVendor=0483, idProduct=2016 [ 19.391676] usb 3-1: new device strings: Mfr=1, Product=2, SerialNumber=0 [ 19.391761] usb 3-1: Product: Biometric Coprocessor [ 19.391842] usb 3-1: Manufacturer: STMicroelectronics [ 19.392043] usb 3-1: configuration #1 chosen from 1 choice [ 19.396691] usbcore: registered new interface driver hci_usb [ 20.184587] loop: loaded (max 8 devices) [ 20.252540] ACPI Sony Notebook Control Driver v0.3 successfully installed [ 20.265908] sonypi: Sony Programmable I/O Controller Driver v1.26. [ 20.266119] sonypi: detected type3 model, verbose = 0, fnkeyinit = off, camera = off, compat = off, mask = 0xffffffff, useinput = on, acpi = on [ 20.266225] sonypi: enabled at irq=11, port1=0x1080, port2=0x1084 [ 20.266310] sonypi: device allocated minor is 63 [ 20.266456] input: Sony Vaio Jogdial as /class/input/input4 [ 20.266639] input: Sony Vaio Keys as /class/input/input5 [ 20.397172] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [email protected] [ 20.885170] scsi 3:0:0:0: Direct-Access Sony USB HS-CARD 4.52 PQ: 0 ANSI: 0 [ 20.935927] sd 3:0:0:0: Attached scsi removable disk sdb [ 20.937884] usb-storage: device scan complete [ 22.644599] SysRq : Show Pending Timers [ 22.644753] Timer List Version: v0.3 [ 22.644833] HRTIMER_MAX_CLOCK_BASES: 2 [ 22.644913] now at 21927904003 nsecs [ 22.644992] [ 22.644993] cpu: 0 [ 22.645144] clock 0: [ 22.645221] .index: 0 [ 22.645300] .resolution: 4000250 nsecs [ 22.645378] .get_time: ktime_get_real [ 22.645587] active timers: [ 22.645665] clock 1: [ 22.645742] .index: 1 [ 22.645821] .resolution: 4000250 nsecs [ 22.645900] .get_time: ktime_get [ 22.646105] active timers: [ 22.646183] .nohz_mode : 1 [ 22.646263] .idle_tick : 21909194500 nsecs [ 22.646343] .tick_stopped : 1 [ 22.646422] .idle_jiffies : 4294897772 [ 22.646502] .idle_calls : 5623 [ 22.646581] .idle_sleeps : 2067 [ 22.646661] .idle_entrytime : 21924531594 nsecs [ 22.646742] .idle_sleeptime : 16263844796 nsecs [ 22.646823] .last_jiffies : 4294897777 [ 22.646903] .next_jiffies : 4294897996 [ 22.646984] .idle_expires : 22800000000 nsecs [ 22.647065] jiffies: 4294897777 [ 22.647143] [ 22.647144] cpu: 1 [ 22.647294] clock 0: [ 22.647371] .index: 0 [ 22.647449] .resolution: 4000250 nsecs [ 22.647529] .get_time: ktime_get_real [ 22.647735] active timers: [ 22.647813] clock 1: [ 22.647890] .index: 1 [ 22.647968] .resolution: 4000250 nsecs [ 22.648047] .get_time: ktime_get [ 22.648252] active timers: [ 22.648330] #0: <c037fd9c>, hrtimer_wakeup, S:01 [ 22.648738] # expires at 16066999784 nsecs [in -5860904219 nsecs] [ 22.648821] #1: <c037fd9c>, hrtimer_wakeup, S:01 [ 22.649218] # expires at 16325154918 nsecs [in -5602749085 nsecs] [ 22.649301] .nohz_mode : 1 [ 22.649380] .idle_tick : 15324783000 nsecs [ 22.649461] .tick_stopped : 1 [ 22.649540] .idle_jiffies : 4294896127 [ 22.649619] .idle_calls : 2080 [ 22.649698] .idle_sleeps : 363 [ 22.649778] .idle_entrytime : 15325159667 nsecs [ 22.649858] .idle_sleeptime : 10015150422 nsecs [ 22.649940] .last_jiffies : 4294896127 [ 22.650020] .next_jiffies : 4294896189 [ 22.650100] .idle_expires : 15572000000 nsecs [ 22.650181] jiffies: 4294897777 [ 22.650259] [ 22.650335] [ 22.650336] Tick Device: mode: 1 [ 22.650488] Clock Event Device: pit [ 22.650630] max_delta_ns: 27461866 [ 22.650710] min_delta_ns: 4000250 [ 22.650789] mult: 5124677 [ 22.650868] shift: 32 [ 22.655112] mode: 3 [ 22.655191] next_event: 21940398000 nsecs [ 22.655271] set_next_event: pit_next_event [ 22.655478] set_mode: init_pit_timer [ 22.655685] event_handler: tick_handle_oneshot_broadcast [ 22.655894] tick_broadcast_mask: 00000003 [ 22.655974] tick_broadcast_oneshot_mask: 00000003 [ 22.656054] [ 22.656130] [ 22.656131] Tick Device: mode: 1 [ 22.656284] Clock Event Device: lapic [ 22.656427] max_delta_ns: 805302234 [ 22.656506] min_delta_ns: 4000250 [ 22.656585] mult: 44739467 [ 22.656664] shift: 32 [ 22.656742] mode: 1 [ 22.656821] next_event: 22800000000 nsecs [ 22.656900] set_next_event: lapic_next_event [ 22.657108] set_mode: lapic_timer_setup [ 22.657313] event_handler: tick_nohz_handler [ 22.657520] [ 22.657521] Tick Device: mode: 1 [ 22.657675] Clock Event Device: lapic [ 22.657817] max_delta_ns: 805302234 [ 22.657896] min_delta_ns: 4000250 [ 22.657975] mult: 44739467 [ 22.658054] shift: 32 [ 22.658132] mode: 1 [ 22.658211] next_event: 21940398000 nsecs [ 22.658290] set_next_event: lapic_next_event [ 22.658498] set_mode: lapic_timer_setup [ 22.658704] event_handler: tick_nohz_handler [ 22.658911] [ 24.960910] sky2 eth0: enabling interface [ 24.963185] sky2 eth0: ram buffer 4K [ 25.631447] SysRq : HELP : loglevel0-8 reBoot Crashdump tErm Full kIll saK showMem Nice powerOff showPc show-all-timers(Q) unRaw Sync showTasks Unmount shoW-blocked-tasks [ 25.658195] SysRq : HELP : loglevel0-8 reBoot Crashdump tErm Full kIll saK showMem Nice powerOff showPc show-all-timers(Q) unRaw Sync showTasks Unmount shoW-blocked-tasks [ 28.109737] ip_tables: (C) 2000-2006 Netfilter Core Team [ 28.254608] SysRq : Show Pending Timers [ 28.254763] Timer List Version: v0.3 [ 28.254843] HRTIMER_MAX_CLOCK_BASES: 2 [ 28.254923] now at 84748407269 nsecs [ 28.255002] [ 28.255003] cpu: 0 [ 28.255153] clock 0: [ 28.255230] .index: 0 [ 28.255308] .resolution: 4000250 nsecs [ 28.255387] .get_time: ktime_get_real [ 28.255596] active timers: [ 28.255673] clock 1: [ 28.255751] .index: 1 [ 28.255829] .resolution: 4000250 nsecs [ 28.255908] .get_time: ktime_get [ 28.256113] active timers: [ 28.256191] .nohz_mode : 1 [ 28.256271] .idle_tick : 84745121500 nsecs [ 28.256351] .tick_stopped : 1 [ 28.256430] .idle_jiffies : 4294913481 [ 28.256510] .idle_calls : 18743 [ 28.256590] .idle_sleeps : 7028 [ 28.256669] .idle_entrytime : 84743152948 nsecs [ 28.256750] .idle_sleeptime : 78231207829 nsecs [ 28.256831] .last_jiffies : 4294913481 [ 28.256911] .next_jiffies : 4294913568 [ 28.256991] .idle_expires : 85088000000 nsecs [ 28.257072] jiffies: 4294913483 [ 28.257150] [ 28.257151] cpu: 1 [ 28.257302] clock 0: [ 28.257380] .index: 0 [ 28.257459] .resolution: 4000250 nsecs [ 28.257538] .get_time: ktime_get_real [ 28.257744] active timers: [ 28.257822] clock 1: [ 28.257899] .index: 1 [ 28.257977] .resolution: 4000250 nsecs [ 28.258057] .get_time: ktime_get [ 28.258262] active timers: [ 28.258340] .nohz_mode : 1 [ 28.258419] .idle_tick : 82853003250 nsecs [ 28.258500] .tick_stopped : 1 [ 28.258579] .idle_jiffies : 4294913009 [ 28.258659] .idle_calls : 2225 [ 28.258738] .idle_sleeps : 502 [ 28.258817] .idle_entrytime : 82852308274 nsecs [ 28.258898] .idle_sleeptime : 64942227277 nsecs [ 28.258979] .last_jiffies : 4294913009 [ 28.259059] .next_jiffies : 4294913072 [ 28.259139] .idle_expires : 83104000000 nsecs [ 28.259220] jiffies: 4294913483 [ 28.259298] [ 28.259374] [ 28.259375] Tick Device: mode: 1 [ 28.259528] Clock Event Device: pit [ 28.259670] max_delta_ns: 27461866 [ 28.259750] min_delta_ns: 4000250 [ 28.259829] mult: 5124677 [ 28.259907] shift: 32 [ 28.259985] mode: 3 [ 28.260064] next_event: 84752103000 nsecs [ 28.260144] set_next_event: pit_next_event [ 28.260352] set_mode: init_pit_timer [ 28.260558] event_handler: tick_handle_oneshot_broadcast [ 28.260768] tick_broadcast_mask: 00000003 [ 28.260847] tick_broadcast_oneshot_mask: 00000003 [ 28.260927] [ 28.261004] [ 28.261005] Tick Device: mode: 1 [ 28.261158] Clock Event Device: lapic [ 28.261300] max_delta_ns: 805302234 [ 28.261380] min_delta_ns: 4000250 [ 28.261459] mult: 44739467 [ 28.261538] shift: 32 [ 28.261616] mode: 1 [ 28.261695] next_event: 85088000000 nsecs [ 28.261775] set_next_event: lapic_next_event [ 28.261982] set_mode: lapic_timer_setup [ 28.262188] event_handler: tick_nohz_handler [ 28.262396] [ 28.262397] Tick Device: mode: 1 [ 28.262549] Clock Event Device: lapic [ 28.262692] max_delta_ns: 805302234 [ 28.262771] min_delta_ns: 4000250 [ 28.262850] mult: 44739467 [ 28.262929] shift: 32 [ 28.263007] mode: 1 [ 28.263086] next_event: 84752103000 nsecs [ 28.263166] set_next_event: lapic_next_event [ 28.263372] set_mode: lapic_timer_setup [ 28.263580] event_handler: tick_nohz_handler [ 28.263786] [ 29.909054] NET: Registered protocol family 10 [ 29.909350] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 31.186106] SysRq : HELP : loglevel0-8 reBoot Crashdump tErm Full kIll saK showMem Nice powerOff showPc show-all-timers(Q) unRaw Sync showTasks Unmount shoW-blocked-tasks [ 32.590766] Netfilter messages via NETLINK v0.30. [ 32.600430] nf_conntrack version 0.5.0 (8179 buckets, 65432 max) [ 33.941705] SysRq : Kill All Tasks [ 34.586457] BUG: soft lockup detected on CPU#1! [ 34.586544] [<c0104dac>] show_trace_log_lvl+0x1a/0x2f [ 34.586694] [<c010540b>] show_trace+0x12/0x14 [ 34.586839] [<c010548f>] dump_stack+0x16/0x18 [ 34.586984] [<c0146e38>] softlockup_tick+0xa7/0xb6 [ 34.587131] [<c01286c0>] run_local_timers+0x12/0x14 [ 34.587279] [<c0128a61>] update_process_times+0x3e/0x63 [ 34.587426] [<c01374ad>] tick_nohz_handler+0x7d/0xe3 [ 34.587574] [<c01137c2>] smp_apic_timer_interrupt+0x71/0x83 [ 34.587722] [<c01048f4>] apic_timer_interrupt+0x28/0x30 [ 34.587868] ======================= [ 43.170040] can't load conntrack support for proto=2 [ 64.504432] ieee80211_crypt: registered algorithm 'NULL' [ 64.506781] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 64.506870] ieee80211: Copyright (C) 2004-2005 Intel Corporation <[email protected]> [ 64.518715] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.0dmpr [ 64.518831] ipw3945: Copyright(c) 2003-2006 Intel Corporation [ 64.519096] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 64.519309] PCI: Setting latency timer of device 0000:06:00.0 to 64 [ 64.519534] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection [ 66.818471] BUG: soft lockup detected on CPU#1! [ 66.818476] [<c0104dac>] show_trace_log_lvl+0x1a/0x2f [ 66.818485] [<c010540b>] show_trace+0x12/0x14 [ 66.818491] [<c010548f>] dump_stack+0x16/0x18 [ 66.818496] [<c0146e38>] softlockup_tick+0xa7/0xb6 [ 66.818503] [<c01286c0>] run_local_timers+0x12/0x14 [ 66.818510] [<c0128a61>] update_process_times+0x3e/0x63 [ 66.818516] [<c01374ad>] tick_nohz_handler+0x7d/0xe3 [ 66.818522] [<c01137c2>] smp_apic_timer_interrupt+0x71/0x83 [ 66.818529] [<c01048f4>] apic_timer_interrupt+0x28/0x30 [ 66.818535] [<c01e5876>] vgacon_set_cursor_size+0xc9/0xd1 [ 66.818541] [<c01e6c98>] vgacon_cursor+0x176/0x18e [ 66.818546] [<c022e439>] hide_cursor+0x24/0x61 [ 66.818553] [<c023005d>] do_con_write+0xdf/0x14f5 [ 66.818559] [<c02314ae>] con_write+0xc/0x1b [ 66.818563] [<c022719a>] write_chan+0x1c6/0x291 [ 66.818569] [<c0224cc0>] tty_write+0x147/0x1c9 [ 66.818574] [<c0163ddf>] vfs_write+0xaf/0x163 [ 66.818580] [<c016441f>] sys_write+0x3d/0x61 [ 66.818585] [<c0103e28>] sysenter_past_esp+0x5d/0x81 [ 66.818591] ======================= [ 67.266186] ipw3945: ipw3945.ucode load failed: Reason -2 [ 67.266190] ipw3945: Could not read microcode: -2 [ 67.266976] ACPI: PCI interrupt for device 0000:06:00.0 disabled [ 67.267069] ipw3945: probe of 0000:06:00.0 failed with error -2
Signature · 2 lines
mattia :wq!
Mattia,
Quoted 8 lines · Mattia Dongili
Quoted 4 lines
It might be helpful if you could try with your original config again. Please enable printk timestamps and SysRq. Once the slowness kicks in please issue a SysRq-Q, so we can look at the internal state of the tick code.
dmesg is below. I need to say that the printk times are bogus wrt the actual time passing and at one point I was sick waiting and killed all tasks. Ah, I have Ingo's resume-fix patch applied here.
Ok, does not affect your problem.
Thanks for testing.
Quoted 3 lines
[ 13.117670] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 13.391218] APIC calibration not consistent with PM Timer: 228ms instead of 100ms [ 13.391315] APIC delta adjusted to PM-Timer: 1041737 (2375299)
Sigh. This APIC calibration madness seems to be spreading (especially on Sony laptops). But this is not the cause of the problem.
Quoted 11 lines
[ 14.448611] ACPI: (supports S0 S3 S4 S5) [ 14.449145] Time: acpi_pm clocksource has been installed. [ 14.449254] Switched to NOHz mode on CPU #1 [ 14.449258] Switched to NOHz mode on CPU #0[ 20.937884] usb-storage: device scan complete [ 22.644599] SysRq : Show Pending Timers [ 22.644753] Timer List Version: v0.3 [ 22.644833] HRTIMER_MAX_CLOCK_BASES: 2 [ 22.644913] now at 21927904003 nsecs
Quoted 7 lines
[ 22.646105] active timers: [ 22.646183] .nohz_mode : 1 [ 22.646343] .tick_stopped : 1 [ 22.646823] .last_jiffies : 4294897777 [ 22.646903] .next_jiffies : 4294897996 [ 22.646984] .idle_expires : 22800000000 nsecs [ 22.647065] jiffies: 4294897777
Looks consistent.
Quoted 6 lines
[ 22.647144] cpu: 1 [ 22.648252] active timers: [ 22.648330] #0: <c037fd9c>, hrtimer_wakeup, S:01 [ 22.648738] # expires at 16066999784 nsecs [in -5860904219 nsecs] [ 22.648821] #1: <c037fd9c>, hrtimer_wakeup, S:01 [ 22.649218] # expires at 16325154918 nsecs [in -5602749085 nsecs]
ouch. that's 5 seconds over time
Quoted 10 lines
[ 22.649301] .nohz_mode : 1 [ 22.649380] .idle_tick : 15324783000 nsecs [ 22.649461] .tick_stopped : 1 [ 22.649540] .idle_jiffies : 4294896127 [ 22.649619] .idle_calls : 2080 [ 22.649698] .idle_sleeps : 363 [ 22.649778] .idle_entrytime : 15325159667 nsecs [ 22.649858] .idle_sleeptime : 10015150422 nsecs [ 22.649940] .last_jiffies : 4294896127 [ 22.650020] .next_jiffies : 4294896189
delta is 62 jiffies = 62 * 4ms which is consistent with the idle_expires time below:
Quoted 2 lines
[ 22.650100] .idle_expires : 15572000000 nsecs [ 22.650181] jiffies: 4294897777
CPU 1 got no updates since it went idle.
Quoted 6 lines
[ 22.650336] Tick Device: mode: 1 [ 22.650488] Clock Event Device: pit [ 22.655191] next_event: 21940398000 nsecs[ 22.655894] tick_broadcast_mask: 00000003 [ 22.655974] tick_broadcast_oneshot_mask: 00000003
Though the broadcast mode is active for both cpus
Quoted 7 lines
[ 22.656131] Tick Device: mode: 1 [ 22.656284] Clock Event Device: lapic [ 22.656821] next_event: 22800000000 nsecs[ 22.657521] Tick Device: mode: 1 [ 22.657675] Clock Event Device: lapic [ 22.658211] next_event: 21940398000 nsecs
And the broadcast event is set for the next CPU#1 event, but the expiry time is far away from the idle_expires time above.
I'm a bit puzzled and too tired to spot the bug right now.
May I ask you for another test ? Please turn on high resolution timers and check, if the same strange behaviour is happening.
Thanks.
tglx
dynticks + iptables almost stops the boot process [was: Re: 2.6.20-rc6-mm3]
Cc-ing netdev and netfilter-devel, the beginning of the thread is here
http://lkml.org/lkml/2007/1/31/306
Quoted 1 line · Thomas Gleixner
Mattia,
...
Quoted 2 lines
May I ask you for another test ? Please turn on high resolution timers and check, if the same strange behaviour is happening.
Yep, here we go again. Still seeing long stalls but no negative expires offset.
Actually one more test I did is disabling my iptables script and the boot process went fine. The script is just:
#!/bin/sh iptables -F INPUT iptables -F FORWARD iptables -F OUTPUT iptables -P INPUT DROP iptables -P FORWARD ACCEPT iptables -A INPUT -i lo -j ACCEPT iptables -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -A INPUT -p tcp --dport ssh -j ACCEPT # LAN iptables -I INPUT -s 10.0.0.0/8 -j ACCEPT # LAN UML iptables -I INPUT -s 172.20.0.0/16 -j ACCEPT echo "iptables: MASQUERADING for virtual machines" iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE iptables -t nat -A POSTROUTING -o eth2 -j MASQUERADE sysctl -w net.ipv4.ip_forward=1
and executing it from a shell once the boot process is done doesn't generate all that strangeness/slowness...
Dmesg with iptables script enabled:
[ 0.000000] Linux version 2.6.20-rc6-mm3-1 (mattia@tadamune) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #8 SMP Fri Feb 2 10:26:07 CET 2007 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] sanitize start [ 0.000000] sanitize end [ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2 [ 0.000000] copy_e820_map() start: 00000000000dc000 size: 0000000000024000 end: 0000000000100000 type: 2 [ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000003fd70000 end: 000000003fe70000 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000003fe70000 size: 0000000000090000 end: 000000003ff00000 type: 4 [ 0.000000] copy_e820_map() start: 000000003ff00000 size: 0000000000100000 end: 0000000040000000 type: 2 [ 0.000000] copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2 [ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2 [ 0.000000] copy_e820_map() start: 00000000fed14000 size: 0000000000006000 end: 00000000fed1a000 type: 2 [ 0.000000] copy_e820_map() start: 00000000fed1c000 size: 0000000000074000 end: 00000000fed90000 type: 2 [ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2 [ 0.000000] copy_e820_map() start: 00000000ff000000 size: 0000000001000000 end: 0000000100000000 type: 2 [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fe70000 (usable) [ 0.000000] BIOS-e820: 000000003fe70000 - 000000003ff00000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] 126MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f6480 [ 0.000000] Entering add_active_range(0, 0, 261744) 0 entries of 256 used [ 0.000000] sizeof(struct page) = 32 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 261744 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 261744 [ 0.000000] On node 0 totalpages: 261744 [ 0.000000] Node 0 memmap at 0xc1000000 size 8388608 first pfn 0xc1000000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 252 pages used for memmap [ 0.000000] HighMem zone: 32116 pages, LIFO batch:7 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP @ 0x000f63b0/0x0014 (v000 PTLTD ) [ 0.000000] ACPI: RSDT @ 0x3fe764ef/0x0048 (v001 Sony N0 0x20060710 PTL 0x00000000) [ 0.000000] ACPI: FACP @ 0x3fe7ddde/0x0084 (v002 Sony N0 0x20060710 PTL 0x0000005A) [ 0.000000] ACPI: DSDT @ 0x3fe77e33/0x5FAB (v001 Sony N0 0x20060710 PTL 0x0100000E) [ 0.000000] ACPI: FACS @ 0x3fe7efc0/0x0040 [ 0.000000] ACPI: APIC @ 0x3fe7de62/0x0068 (v001 Sony N0 0x20060710 PTL 0x0000005A) [ 0.000000] ACPI: BOOT @ 0x3fe7dfd8/0x0028 (v001 Sony N0 0x20060710 PTL 0x00000001) [ 0.000000] ACPI: MCFG @ 0x3fe7df02/0x003C (v001 Sony N0 0x20060710 PTL 0x0000005A) [ 0.000000] ACPI: TCPA @ 0x3fe7df3e/0x0032 (v001 Sony N0 0x20060710 PTL 0x00005A52) [ 0.000000] ACPI: APIC @ 0x3fe7df70/0x0068 (v001 Sony N0 0x20060710 PTL 0x00000000) [ 0.000000] ACPI: SSDT @ 0x3fe776b1/0x077E (v001 Sony N0 0x20060710 PTL 0x20050624) [ 0.000000] ACPI: SSDT @ 0x3fe76ee6/0x07CB (v001 Sony N0 0x20060710 PTL 0x20050624) [ 0.000000] ACPI: SSDT @ 0x3fe76537/0x04E2 (v001 Sony N0 0x20060710 PTL 0x20050624) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) [ 0.000000] Detected 1833.542 MHz processor. [ 12.656208] Built 1 zonelists. Total pages: 259700 [ 12.656213] Kernel command line: root=/dev/sda3 ro vga=extended resume=/dev/sda5 clocksource=pmtmr [ 12.656378] mapped APIC to ffffd000 (fee00000) [ 12.656380] mapped IOAPIC to ffffc000 (fec00000) [ 12.656383] Enabling fast FPU save and restore... done. [ 12.656385] Enabling unmasked SIMD FPU exception support... done. [ 12.656391] Initializing CPU#0 [ 12.656448] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 12.661847] Console: colour VGA+ 80x50 [ 12.667663] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 12.668011] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 12.688698] Memory: 1034188k/1046976k available (1867k kernel code, 12244k reserved, 684k data, 212k init, 129472k highmem) [ 12.688800] virtual kernel memory layout: [ 12.688801] fixmap : 0xfff9d000 - 0xfffff000 ( 392 kB) [ 12.688802] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 12.688803] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 12.688804] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 12.688805] .init : 0xc0384000 - 0xc03b9000 ( 212 kB) [ 12.688806] .data : 0xc02d2cd9 - 0xc037dff4 ( 684 kB) [ 12.688807] .text : 0xc0100000 - 0xc02d2cd9 (1867 kB) [ 12.689406] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 12.769590] Calibrating delay using timer specific routine.. 3671.19 BogoMIPS (lpj=7342397) [ 12.769770] Security Framework v1.0.0 initialized [ 12.769849] Capability LSM initialized [ 12.769933] Mount-cache hash table entries: 512 [ 12.770090] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 [ 12.770097] monitor/mwait feature present. [ 12.770172] using mwait in idle threads. [ 12.770248] CPU: L1 I cache: 32K, L1 D cache: 32K [ 12.770384] CPU: L2 cache: 2048K [ 12.770458] CPU: Physical Processor ID: 0 [ 12.770532] CPU: Processor Core ID: 0 [ 12.770606] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 [ 12.770612] Intel machine check architecture supported. [ 12.770690] Intel machine check reporting enabled on CPU#0. [ 12.770770] Compat vDSO mapped to ffffe000. [ 12.770852] Checking 'hlt' instruction... OK. [ 12.785704] SMP alternatives: switching to UP code [ 12.785933] ACPI: Core revision 20070126 [ 12.792086] Parsing all Control Methods: [ 12.792319] Table [DSDT](id 0001) - 923 Objects with 104 Devices 193 Methods 29 Regions [ 12.792608] Parsing all Control Methods: [ 12.792798] Table [SSDT](id 0002) - 13 Objects with 3 Devices 4 Methods 0 Regions [ 12.793091] Parsing all Control Methods: [ 12.793284] Table [SSDT](id 0003) - 14 Objects with 3 Devices 5 Methods 0 Regions [ 12.793588] Parsing all Control Methods: [ 12.793782] Table [SSDT](id 0004) - 13 Objects with 0 Devices 4 Methods 0 Regions [ 12.793941] tbxface-0586 [02] tb_load_namespace : ACPI Tables successfully acquired [ 12.797708] evxfevnt-0091 [02] enable : Transition to ACPI mode successful [ 12.797933] CPU0: Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz stepping 06 [ 12.798140] SMP alternatives: switching to SMP code [ 12.798232] Booting processor 1/1 eip 3000 [ 12.808821] Initializing CPU#1 [ 12.889486] Calibrating delay using timer specific routine.. 3667.19 BogoMIPS (lpj=7334396) [ 12.889492] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 [ 12.889497] monitor/mwait feature present. [ 12.889499] CPU: L1 I cache: 32K, L1 D cache: 32K [ 12.889501] CPU: L2 cache: 2048K [ 12.889503] CPU: Physical Processor ID: 0 [ 12.889504] CPU: Processor Core ID: 1 [ 12.889506] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 [ 12.889510] Intel machine check architecture supported. [ 12.889513] Intel machine check reporting enabled on CPU#1. [ 12.889861] CPU1: Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz stepping 06 [ 12.890742] Total of 2 processors activated (7338.39 BogoMIPS). [ 12.891017] ENABLING IO-APIC IRQs [ 12.891289] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 13.169253] APIC calibration not consistent with PM Timer: 232ms instead of 100ms [ 13.169344] APIC delta adjusted to PM-Timer: 1041739 (2416977) [ 13.277458] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 13.297587] Brought up 2 CPUs [ 13.486037] migration_cost=58 [ 13.486405] NET: Registered protocol family 16 [ 13.486556] ACPI: bus type pci registered [ 13.486640] PCI: Using MMCONFIG [ 13.487555] Setting up standard PCI resources [ 13.492475] evgpeblk-0952 [04] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 [ 13.493460] evgpeblk-1049 [03] ev_initialize_gpe_bloc: Found 8 Wake, Enabled 5 Runtime GPEs in this block [ 13.494380] Completing Region/Field/Buffer/Package initialization:......................................................................... [ 13.500284] Initialized 29/29 Regions 4/4 Fields 29/29 Buffers 11/38 Packages (972 nodes) [ 13.500444] Initializing Device/Processor/Thermal objects by executing _INI methods:... [ 13.501726] Executed 3 _INI methods requiring 2 _STA executions (examined 117 objects) [ 13.501901] ACPI: Interpreter enabled [ 13.501975] ACPI: Using IOAPIC for interrupt routing [ 13.502134] Found System \ [ffffffff] [ 13.502189] Found Processor \_PR_.CPU0 [c1907dd8] [ 13.502233] Found Processor \_PR_.CPU1 [c1907dc4] [ 13.502299] Found Device \_SB_ [c19073c4] [ 13.502357] Found Device \_SB_.LID0 [c190da40] [ 13.502421] Found Device \_SB_.PWRB [c190da04] [ 13.502483] Found Device \_SB_.PCI0 [c190d9a0] [ 13.502551] Found Device \_SB_.PCI0.PDRC [c190d7c0] [ 13.502613] Found Device \_SB_.PCI0.PEGP [c190dfcc] [ 13.502679] Found Device \_SB_.PCI0.GFX0 [c190df90] [ 13.502749] Found Device \_SB_.PCI0.HDEF [c190df68] [ 13.502811] Found Device \_SB_.PCI0.RP01 [c190df04] [ 13.502881] Found Device \_SB_.PCI0.RP01.S1F0 [c190de50] [ 13.502950] Found Device \_SB_.PCI0.RP01.S1F1 [c190ddec] [ 13.503017] Found Device \_SB_.PCI0.RP01.S1F2 [c190dd88] [ 13.503092] Found Device \_SB_.PCI0.RP01.S1F3 [c190dd24] [ 13.503159] Found Device \_SB_.PCI0.RP01.S1F4 [c190dcc0] [ 13.503226] Found Device \_SB_.PCI0.RP01.S1F5 [c190dc5c] [ 13.503295] Found Device \_SB_.PCI0.RP01.S1F6 [c190f748] [ 13.503366] Found Device \_SB_.PCI0.RP01.S1F7 [c190f6e4] [ 13.503431] Found Device \_SB_.PCI0.RP02 [c190f66c] [ 13.503604] Found Device \_SB_.PCI0.RP02.WLAN [c190f5b8] [ 13.503670] Found Device \_SB_.PCI0.RP03 [c190f52c] [ 13.503739] Found Device \_SB_.PCI0.RP03.TLAN [c190f464] [ 13.503804] Found Device \_SB_.PCI0.RP04 [c190f414] [ 13.503873] Found Device \_SB_.PCI0.RP04.DLAN [c190f34c] [ 13.503935] Found Device \_SB_.PCI0.RP04.S4F1 [c190f2e8] [ 13.504000] Found Device \_SB_.PCI0.RP04.S4F2 [c190fc0c] [ 13.504063] Found Device \_SB_.PCI0.RP04.S4F3 [c190fbd0] [ 13.504125] Found Device \_SB_.PCI0.RP04.S4F4 [c190fb94] [ 13.504187] Found Device \_SB_.PCI0.RP04.S4F5 [c190fb58] [ 13.504249] Found Device \_SB_.PCI0.RP04.S4F6 [c190fb1c] [ 13.504312] Found Device \_SB_.PCI0.RP04.S4F7 [c190fae0] [ 13.504380] Found Device \_SB_.PCI0.RP05 [c190faa4] [ 13.504443] Found Device \_SB_.PCI0.RP05.EX2P [c190f9dc] [ 13.504505] Found Device \_SB_.PCI0.RP05.S5F1 [c190f978] [ 13.504567] Found Device \_SB_.PCI0.RP05.S5F2 [c190f93c] [ 13.504632] Found Device \_SB_.PCI0.RP05.S5F3 [c190f900] [ 13.504694] Found Device \_SB_.PCI0.RP05.S5F4 [c190f8c4] [ 13.504759] Found Device \_SB_.PCI0.RP05.S5F5 [c190f888] [ 13.504820] Found Device \_SB_.PCI0.RP05.S5F6 [c190f84c] [ 13.504883] Found Device \_SB_.PCI0.RP05.S5F7 [c190f810] [ 13.504948] Found Device \_SB_.PCI0.RP06 [c190f7d4] [ 13.505024] Found Device \_SB_.PCI0.RP06.S6F0 [c190ffa4] [ 13.505093] Found Device \_SB_.PCI0.RP06.S6F1 [c190ff40] [ 13.505168] Found Device \_SB_.PCI0.RP06.S6F2 [c190fedc] [ 13.505236] Found Device \_SB_.PCI0.RP06.S6F3 [c190fe78] [ 13.505306] Found Device \_SB_.PCI0.RP06.S6F4 [c190fe14] [ 13.505375] Found Device \_SB_.PCI0.RP06.S6F5 [c190fdb0] [ 13.505444] Found Device \_SB_.PCI0.RP06.S6F6 [c190fd4c] [ 13.505513] Found Device \_SB_.PCI0.RP06.S6F7 [c190fce8] [ 13.505586] Found Device \_SB_.PCI0.USB1 [c190fc70] [ 13.505657] Found Device \_SB_.PCI0.USB2 [c1910748] [ 13.505728] Found Device \_SB_.PCI0.USB3 [c19106d0] [ 13.505798] Found Device \_SB_.PCI0.USB4 [c1910658] [ 13.505869] Found Device \_SB_.PCI0.USB7 [c19105e0] [ 13.505932] Found Device \_SB_.PCI0.USB7.HUB7 [c19105b8] [ 13.505999] Found Device \_SB_.PCI0.USB7.HUB7.PRT1 [c1910590] [ 13.506061] Found Device \_SB_.PCI0.USB7.HUB7.PRT2 [c1910568] [ 13.506124] Found Device \_SB_.PCI0.USB7.HUB7.PRT3 [c1910540] [ 13.506187] Found Device \_SB_.PCI0.USB7.HUB7.PRT4 [c1910518] [ 13.506251] Found Device \_SB_.PCI0.USB7.HUB7.PRT5 [c19104f0] [ 13.506313] Found Device \_SB_.PCI0.USB7.HUB7.PRT6 [c19104c8] [ 13.506378] Found Device \_SB_.PCI0.USB7.HUB7.PRT7 [c19104a0] [ 13.506441] Found Device \_SB_.PCI0.USB7.HUB7.PRT8 [c1910478] [ 13.506508] Found Device \_SB_.PCI0.PCIB [c191043c] [ 13.506581] Found Device \_SB_.PCI0.PCIB.SLT0 [c1910414] [ 13.506652] Found Device \_SB_.PCI0.PCIB.LANC [c19103d8] [ 13.506821] Found Device \_SB_.PCI0.PCIB.CRD2 [c191039c] [ 13.506894] Found Device \_SB_.PCI0.PCIB.S294 [c19102c0] [ 13.506957] Found Device \_SB_.PCI0.PCIB.MST2 [c1910bf8] [ 13.507126] Found Device \_SB_.PCI0.PCIB.CRD0 [c1910bd0] [ 13.507195] Found Device \_SB_.PCI0.PCIB.SD94 [c1910af4] [ 13.507260] Found Device \_SB_.PCI0.PCIB.MMST [c1910acc] [ 13.507323] Found Device \_SB_.PCI0.AUD0 [c1910a90] [ 13.507390] Found Device \_SB_.PCI0.MODM [c1910a68] [ 13.507456] Found Device \_SB_.PCI0.LPCB [c1910a40] [ 13.507672] Found Device \_SB_.PCI0.LPCB.LNKA [c19108ec] [ 13.507870] Found Device \_SB_.PCI0.LPCB.LNKB [c191084c] [ 13.508068] Found Device \_SB_.PCI0.LPCB.LNKC [c19107ac] [ 13.508263] Found Device \_SB_.PCI0.LPCB.LNKD [c1910f90] [ 13.508462] Found Device \_SB_.PCI0.LPCB.LNKE [c1910ef0] [ 13.508659] Found Device \_SB_.PCI0.LPCB.LNKF [c1910e50] [ 13.508854] Found Device \_SB_.PCI0.LPCB.LNKG [c1910db0] [ 13.509051] Found Device \_SB_.PCI0.LPCB.LNKH [c1910d10] [ 13.509125] Found Device \_SB_.PCI0.LPCB.EC0_ [c1910c70] [ 13.513058] Found Device \_SB_.PCI0.LPCB.EC0_.BAT1 [c1911a18] [ 13.513223] Found Device \_SB_.PCI0.LPCB.EC0_.ACAD [c1911950] [ 13.513283] Found Device \_SB_.PCI0.LPCB.DMAC [c19118ec] [ 13.513344] Found Device \_SB_.PCI0.LPCB.FWHD [c19118b0] [ 13.513500] Found Device \_SB_.PCI0.LPCB.IPIC [c19117fc] [ 13.513560] Found Device \_SB_.PCI0.LPCB.MATH [c19117c0] [ 13.513620] Found Device \_SB_.PCI0.LPCB.LDRC [c1911784] [ 13.513685] Found Device \_SB_.PCI0.LPCB.RTC_ [c1911f90] [ 13.513744] Found Device \_SB_.PCI0.LPCB.TIMR [c1911f54] [ 13.513927] Found Device \_SB_.PCI0.LPCB.TPM_ [c1911f18] [ 13.517907] Found Device \_SB_.PCI0.LPCB.SPIC [c1911ea0] [ 13.517973] Found Device \_SB_.PCI0.LPCB.SNC_ [c1911dd8] [ 13.518038] Found Device \_SB_.PCI0.LPCB.PS2K [c1913748] [ 13.518103] Found Device \_SB_.PCI0.LPCB.PS2M [c191370c] [ 13.518178] Found Device \_SB_.PCI0.PATA [c19136bc] [ 13.518246] Found Device \_SB_.PCI0.PATA.PRID [c19135a4] [ 13.518309] Found Device \_SB_.PCI0.PATA.PRID.P_D0 [c1913554] [ 13.518372] Found Device \_SB_.PCI0.PATA.PRID.P_D1 [c1913518] [ 13.518438] Found Device \_SB_.PCI0.SATA [c191348c] [ 13.518513] Found Device \_SB_.PCI0.SATA.PRID [c19139dc] [ 13.518575] Found Device \_SB_.PCI0.SATA.PRID.P_D0 [c191398c] [ 13.518637] Found Device \_SB_.PCI0.SATA.PRID.P_D1 [c1913950] [ 13.518701] Found Device \_SB_.PCI0.SATA.SECD [c19138d8] [ 13.518765] Found Device \_SB_.PCI0.SATA.SECD.S_D0 [c1913888] [ 13.518828] Found Device \_SB_.PCI0.SATA.SECD.S_D1 [c1913838] [ 13.518896] Found Device \_SB_.PCI0.SBUS [c1913310] [ 13.520899] Found Thermal Zone \_TZ_ [c190739c] [ 13.520948] Found Thermal Zone \_TZ_.ATF0 [c190d4a0] [ 13.520996] Found Thermal Zone \_TZ_.DTS0 [c190d3ec] [ 13.521042] Found Thermal Zone \_TZ_.DTS1 [c190d34c] [ 13.521395] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 13.522092] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 13.522172] PCI quirk: region 1180-11bf claimed by ICH6 GPIO [ 13.522488] Boot video device is 0000:01:00.0 [ 13.523508] PCI: Transparent bridge - 0000:00:1e.0 [ 13.523649] PCI: Bus #0a (-#0d) is hidden behind transparent bridge #09 (-#0a) (try 'pci=assign-busses') [ 13.528498] Please report the result to linux-kernel to fix this permanently [ 13.528651] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 13.529228] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] [ 13.529473] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 13.529721] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 13.529956] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 13.530192] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 13.530461] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 13.537398] ACPI: PCI Interrupt Link [LNKA] (IRQs 10) *5 [ 13.537878] ACPI: PCI Interrupt Link [LNKB] (IRQs *10) [ 13.538297] ACPI: PCI Interrupt Link [LNKC] (IRQs *10) [ 13.538715] ACPI: PCI Interrupt Link [LNKD] (IRQs *10) [ 13.539134] ACPI: PCI Interrupt Link [LNKE] (IRQs 10) *0, disabled. [ 13.539671] ACPI: PCI Interrupt Link [LNKF] (IRQs *10) [ 13.540088] ACPI: PCI Interrupt Link [LNKG] (IRQs *10) [ 13.540506] ACPI: PCI Interrupt Link [LNKH] (IRQs *10) [ 13.540898] Linux Plug and Play Support v0.97 (c) Adam Belay [ 13.540983] pnp: PnP ACPI init [ 13.544418] pnp: PnP ACPI: found 11 devices [ 13.544497] PnPBIOS: Disabled by ACPI PNP [ 13.544687] SCSI subsystem initialized [ 13.544792] libata version 2.00 loaded. [ 13.544845] PCI: Using ACPI for IRQ routing [ 13.544921] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 13.545180] NET: Registered protocol family 8 [ 13.545256] NET: Registered protocol family 20 [ 13.545371] pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved [ 13.545461] pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved [ 13.545551] pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved [ 13.545641] pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved [ 13.545999] PCI: Failed to allocate mem resource #6:20000@d0000000 for 0000:01:00.0 [ 13.546089] PCI: Bridge: 0000:00:01.0 [ 13.546163] IO window: disabled. [ 13.546238] MEM window: dc000000-ddffffff [ 13.546314] PREFETCH window: c0000000-cfffffff [ 13.546389] PCI: Bridge: 0000:00:1c.0 [ 13.546465] IO window: 2000-2fff [ 13.546543] MEM window: d6000000-d7ffffff [ 13.546620] PREFETCH window: d0000000-d1ffffff [ 13.546699] PCI: Bridge: 0000:00:1c.1 [ 13.546773] IO window: disabled. [ 13.546850] MEM window: de100000-de1fffff [ 13.546927] PREFETCH window: disabled. [ 13.547004] PCI: Bridge: 0000:00:1c.2 [ 13.547080] IO window: 3000-3fff [ 13.547158] MEM window: d8000000-d9ffffff [ 13.547235] PREFETCH window: d2000000-d3ffffff [ 13.547314] PCI: Bridge: 0000:00:1c.3 [ 13.547389] IO window: 4000-4fff [ 13.547466] MEM window: da000000-dbffffff [ 13.547544] PREFETCH window: d4000000-d5ffffff [ 13.547629] PCI: Bus 10, cardbus bridge: 0000:09:04.0 [ 13.547705] IO window: 00005000-000050ff [ 13.547783] IO window: 00005400-000054ff [ 13.547861] PREFETCH window: 50000000-53ffffff [ 13.547941] MEM window: 54000000-57ffffff [ 13.548018] PCI: Bridge: 0000:00:1e.0 [ 13.548094] IO window: 5000-5fff [ 13.548171] MEM window: de000000-de0fffff [ 13.548249] PREFETCH window: 50000000-53ffffff [ 13.548335] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 13.548484] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 13.548503] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 13.548654] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 13.548675] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 13.548826] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 13.548847] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 13.548997] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 13.549018] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 [ 13.549171] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 13.549183] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 13.549205] ACPI: PCI Interrupt 0000:09:04.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 13.549378] NET: Registered protocol family 2 [ 13.597074] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 13.597225] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 13.597767] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 13.598088] TCP: Hash tables configured (established 131072 bind 65536) [ 13.598166] TCP reno registered [ 13.609250] Simple Boot Flag at 0x37 set to 0x1 [ 13.609726] audit: initializing netlink socket (disabled) [ 13.609813] audit(1170412029.500:1): initialized [ 13.609958] highmem bounce pool size: 64 pages [ 13.610151] JFS: nTxBlock = 8080, nTxLock = 64646 [ 13.613505] io scheduler noop registered [ 13.613644] io scheduler anticipatory registered [ 13.613778] io scheduler deadline registered [ 13.613922] io scheduler cfq registered (default) [ 13.614399] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 13.614417] assign_interrupt_mode Found MSI capability [ 13.614515] Allocate Port Service[0000:00:01.0:pcie00] [ 13.614551] Allocate Port Service[0000:00:01.0:pcie03] [ 13.614609] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 13.614661] assign_interrupt_mode Found MSI capability [ 13.614772] Allocate Port Service[0000:00:1c.0:pcie00] [ 13.614800] Allocate Port Service[0000:00:1c.0:pcie02] [ 13.614828] Allocate Port Service[0000:00:1c.0:pcie03] [ 13.614937] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 13.614989] assign_interrupt_mode Found MSI capability [ 13.615100] Allocate Port Service[0000:00:1c.1:pcie00] [ 13.615132] Allocate Port Service[0000:00:1c.1:pcie02] [ 13.615159] Allocate Port Service[0000:00:1c.1:pcie03] [ 13.615267] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 13.615318] assign_interrupt_mode Found MSI capability [ 13.615430] Allocate Port Service[0000:00:1c.2:pcie00] [ 13.615458] Allocate Port Service[0000:00:1c.2:pcie02] [ 13.615486] Allocate Port Service[0000:00:1c.2:pcie03] [ 13.615596] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 13.615648] assign_interrupt_mode Found MSI capability [ 13.615759] Allocate Port Service[0000:00:1c.3:pcie00] [ 13.615792] Allocate Port Service[0000:00:1c.3:pcie02] [ 13.615820] Allocate Port Service[0000:00:1c.3:pcie03] [ 13.616662] ACPI: SSDT @ 0x3fe76cb5/0x01A8 (v001 Sony N0 0x20060710 PTL 0x20050624) [ 13.616935] Parsing all Control Methods: [ 13.617186] Table [SSDT](id 0075) - 5 Objects with 0 Devices 3 Methods 0 Regions [ 13.617548] ACPI: SSDT @ 0x3fe76a19/0x0217 (v001 Sony N0 0x20060710 PTL 0x20050624) [ 13.617782] Parsing all Control Methods: [ 13.618024] Table [SSDT](id 0076) - 1 Objects with 0 Devices 1 Methods 0 Regions [ 13.619237] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 13.619491] ACPI: Processor [CPU0] (supports 8 throttling states) [ 13.620251] ACPI: SSDT @ 0x3fe76e5d/0x0089 (v001 Sony N0 0x20060710 PTL 0x20050624) [ 13.620502] Parsing all Control Methods: [ 13.620746] Table [SSDT](id 007B) - 3 Objects with 0 Devices 3 Methods 0 Regions [ 13.621099] ACPI: SSDT @ 0x3fe76c30/0x0085 (v001 Sony N0 0x20060710 PTL 0x20050624) [ 13.621333] Parsing all Control Methods: [ 13.621575] Table [SSDT](id 007C) - 1 Objects with 0 Devices 1 Methods 0 Regions [ 13.622492] ACPI: CPU1 (power states: C1[C1] C2[C2]) [ 13.622745] ACPI: Processor [CPU1] (supports 8 throttling states) [ 13.626038] isapnp: Scanning for PnP cards... [ 13.980304] isapnp: No Plug & Play device found [ 13.983323] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled [ 13.984586] RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize [ 13.984757] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 13.984837] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 13.984956] ICH7: IDE controller at PCI slot 0000:00:1f.1 [ 13.985043] ACPI: PCI Interrupt 0000:00:1f.1[B] -> GSI 22 (level, low) -> IRQ 21 [ 13.985196] ICH7: chipset revision 2 [ 13.985270] ICH7: not 100% native mode: will probe irqs later [ 13.985355] ide0: BM-DMA at 0x1880-0x1887, BIOS settings: hda:DMA, hdb:pio [ 13.985570] Probing IDE interface ide0... [ 14.718632] hda: MATSHITADVD-RAM UJ-842S, ATAPI CD/DVD-ROM drive [ 15.054051] hda: selected mode 0x42 [ 15.054400] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 15.057040] ata_piix 0000:00:1f.2: version 2.00ac7 [ 15.057045] ata_piix 0000:00:1f.2: MAP [ P0 P2 XX XX ] [ 15.057415] ata_piix 0000:00:1f.2: invalid MAP value 0 [ 15.209918] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 22 (level, low) -> IRQ 21 [ 15.210091] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 15.210146] ata1: SATA max UDMA/133 cmd 0x18C8 ctl 0x18AE bmdma 0x18B0 irq 21 [ 15.210259] ata2: SATA max UDMA/133 cmd 0x18C0 ctl 0x18AA bmdma 0x18B8 irq 21 [ 15.210348] scsi0 : ata_piix [ 15.384675] ata1.00: ATA-6, max UDMA/100, 195371568 sectors: LBA48 NCQ (depth 0/32) [ 15.384772] ata1.00: ata1: dev 0 multi count 16 [ 15.400425] ata1.00: configured for UDMA/100 [ 15.400511] scsi1 : ata_piix [ 15.564861] ATA: abnormal status 0x7F on port 0x18C7 [ 15.565018] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1032GS AS02 PQ: 0 ANSI: 5 [ 15.565202] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB) [ 15.565288] sda: Write Protect is off [ 15.565363] sda: Mode Sense: 00 3a 00 00 [ 15.565377] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 15.565500] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB) [ 15.565591] sda: Write Protect is off [ 15.569839] sda: Mode Sense: 00 3a 00 00 [ 15.569854] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 15.569945] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > [ 15.646086] sd 0:0:0:0: Attached scsi disk sda [ 15.646299] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 15.648809] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 15.648887] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 15.649038] mice: PS/2 mouse device common for all mice [ 15.679204] TCP bic registered [ 15.679286] NET: Registered protocol family 1 [ 15.679363] NET: Registered protocol family 17 [ 15.679504] Starting balanced_irq [ 15.679583] Using IPI No-Shortcut mode [ 15.680054] ACPI: (supports S0 S3 S4 S5) [ 15.681502] Time: acpi_pm clocksource has been installed. [ 15.681613] Switched to high resolution mode on CPU 0 [ 15.681621] Switched to high resolution mode on CPU 1 [ 15.689289] input: AT Translated Set 2 keyboard as /class/input/input0 [ 15.819666] VFS: Mounted root (jfs filesystem) readonly. [ 15.819891] Freeing unused kernel memory: 212k freed [ 18.061181] ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 18.061343] PCI: Setting latency timer of device 0000:07:00.0 to 64 [ 18.061399] sky2 v1.10 addr 0xd8000000 irq 18 Yukon-FE (0xb7) rev 1 [ 18.061602] sky2 eth0: addr 00:13:a9:41:76:84 [ 18.184759] Linux agpgart interface v0.102 (c) Dave Jones [ 18.230566] usbcore: registered new interface driver usbfs [ 18.230670] usbcore: registered new interface driver hub [ 18.230790] usbcore: registered new device driver usb [ 18.334957] Real Time Clock Driver v1.12ac [ 18.436259] tpm_inf_pnp 00:07: Found TPM with ID IFX0102 [ 18.436392] tpm_inf_pnp 00:07: TPM found: config base 0x2e, io base 0x1670, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2) [ 18.806843] agpgart: Detected an Intel 945GM Chipset. [ 18.824115] agpgart: AGP aperture is 256M @ 0x0 [ 18.825199] hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) [ 18.825791] Uniform CD-ROM driver Revision: 3.20 [ 18.829288] USB Universal Host Controller Interface driver v3.0 [ 18.829413] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 18.829603] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 18.829606] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 18.829802] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 18.829948] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001800 [ 18.830061] usb usb1: new device found, idVendor=0000, idProduct=0000 [ 18.830151] usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 [ 18.830233] usb usb1: Product: UHCI Host Controller [ 18.830311] usb usb1: Manufacturer: Linux 2.6.20-rc6-mm3-1 uhci_hcd [ 18.830406] usb usb1: SerialNumber: 0000:00:1d.0 [ 18.830554] usb usb1: configuration #1 chosen from 1 choice [ 18.830653] hub 1-0:1.0: USB hub found [ 18.830734] hub 1-0:1.0: 2 ports detected [ 18.839049] input: PC Speaker as /class/input/input1 [ 18.934472] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 18.934648] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 18.934652] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 18.934760] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 18.934883] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820 [ 18.934997] usb usb2: new device found, idVendor=0000, idProduct=0000 [ 18.935078] usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 [ 18.935158] usb usb2: Product: UHCI Host Controller [ 18.935237] usb usb2: Manufacturer: Linux 2.6.20-rc6-mm3-1 uhci_hcd [ 18.935325] usb usb2: SerialNumber: 0000:00:1d.1 [ 18.935450] usb usb2: configuration #1 chosen from 1 choice [ 18.935550] hub 2-0:1.0: USB hub found [ 18.935628] hub 2-0:1.0: 2 ports detected [ 19.038311] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 19 (level, low) -> IRQ 19 [ 19.038476] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 19.038480] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 19.038586] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 19.038707] uhci_hcd 0000:00:1d.2: irq 19, io base 0x00001840 [ 19.038824] usb usb3: new device found, idVendor=0000, idProduct=0000 [ 19.038907] usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 [ 19.038988] usb usb3: Product: UHCI Host Controller [ 19.039067] usb usb3: Manufacturer: Linux 2.6.20-rc6-mm3-1 uhci_hcd [ 19.039147] usb usb3: SerialNumber: 0000:00:1d.2 [ 19.039272] usb usb3: configuration #1 chosen from 1 choice [ 19.039372] hub 3-0:1.0: USB hub found [ 19.039452] hub 3-0:1.0: 2 ports detected [ 19.065078] input: PS/2 Mouse as /class/input/input2 [ 19.083976] input: AlpsPS/2 ALPS GlidePoint as /class/input/input3 [ 19.142238] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 19 (level, low) -> IRQ 19 [ 19.142416] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 19.142420] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 19.142517] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 19.142634] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001860 [ 19.142745] usb usb4: new device found, idVendor=0000, idProduct=0000 [ 19.142824] usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1 [ 19.142902] usb usb4: Product: UHCI Host Controller [ 19.142977] usb usb4: Manufacturer: Linux 2.6.20-rc6-mm3-1 uhci_hcd [ 19.143055] usb usb4: SerialNumber: 0000:00:1d.3 [ 19.143179] usb usb4: configuration #1 chosen from 1 choice [ 19.143277] hub 4-0:1.0: USB hub found [ 19.143354] hub 4-0:1.0: 2 ports detected [ 19.246296] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 22 [ 19.246466] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 19.246469] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 19.246564] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 19.246680] ehci_hcd 0000:00:1d.7: debug port 1 [ 19.246759] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 19.246768] ehci_hcd 0000:00:1d.7: irq 22, io mem 0xde404000 [ 19.250743] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 19.250843] usb usb5: new device found, idVendor=0000, idProduct=0000 [ 19.250921] usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1 [ 19.250999] usb usb5: Product: EHCI Host Controller [ 19.251075] usb usb5: Manufacturer: Linux 2.6.20-rc6-mm3-1 ehci_hcd [ 19.251152] usb usb5: SerialNumber: 0000:00:1d.7 [ 19.251271] usb usb5: configuration #1 chosen from 1 choice [ 19.251367] hub 5-0:1.0: USB hub found [ 19.251446] hub 5-0:1.0: 8 ports detected [ 19.277992] usb 2-2: new full speed USB device using uhci_hcd and address 2 [ 19.354179] Yenta: CardBus bridge found at 0000:09:04.0 [104d:81e6] [ 19.354284] Yenta: Using CSCINT to route CSC interrupts to PCI [ 19.354364] Yenta: Routing CardBus interrupts to PCI [ 19.354448] Yenta TI: socket 0000:09:04.0, mfunc 0x01a21b22, devctl 0x64 [ 19.586447] Yenta: ISA IRQ mask 0x0cf8, PCI irq 20 [ 19.586529] Socket status: 30000006 [ 19.586604] Yenta: Raising subordinate bus# of parent bus (#09) from #0a to #0d [ 19.586697] pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff [ 19.586775] cs: IO port probe 0x5000-0x5fff: clean. [ 19.587174] pcmcia: parent PCI bridge Memory window: 0xde000000 - 0xde0fffff [ 19.587253] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff [ 19.588679] ACPI: PCI Interrupt 0000:09:04.2[C] -> GSI 22 (level, low) -> IRQ 21 [ 19.589299] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 23 [ 19.589466] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 19.933584] cs: IO port probe 0x100-0x3af: clean. [ 19.935977] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 19.937170] cs: IO port probe 0x820-0x8ff: clean. [ 19.938154] cs: IO port probe 0xc00-0xcf7: clean. [ 19.939237] cs: IO port probe 0xa00-0xaff: clean. [ 20.093211] usb 5-4: new high speed USB device using ehci_hcd and address 2 [ 20.271285] Adding 979924k swap on /dev/sda5. Priority:-1 extents:1 across:979924k [ 20.288742] usb 5-4: new device found, idVendor=054c, idProduct=0281 [ 20.288838] usb 5-4: new device strings: Mfr=1, Product=2, SerialNumber=3 [ 20.288922] usb 5-4: Product: UMH-U09 [ 20.289027] usb 5-4: Manufacturer: Sony [ 20.289105] usb 5-4: SerialNumber: F000001C9B3A [ 20.293450] usb 5-4: configuration #1 chosen from 1 choice [ 20.345108] Initializing USB Mass Storage driver... [ 20.772574] usb 5-6: new high speed USB device using ehci_hcd and address 4 [ 20.905671] usb 5-6: new device found, idVendor=05ca, idProduct=1830 [ 20.905758] usb 5-6: new device strings: Mfr=0, Product=0, SerialNumber=0 [ 20.905960] usb 5-6: configuration #1 chosen from 1 choice [ 21.328108] scsi2 : SCSI emulation for USB Mass Storage devices [ 21.328262] usb-storage: device found at 2 [ 21.328264] usb-storage: waiting for device to settle before scanning [ 21.328279] usbcore: registered new interface driver usb-storage [ 21.328360] USB Mass Storage support registered. [ 21.567772] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 21.744417] usb 3-1: new device found, idVendor=0483, idProduct=2016 [ 21.744506] usb 3-1: new device strings: Mfr=1, Product=2, SerialNumber=0 [ 21.744590] usb 3-1: Product: Biometric Coprocessor [ 21.744681] usb 3-1: Manufacturer: STMicroelectronics [ 21.744828] usb 3-1: configuration #1 chosen from 1 choice [ 21.952816] loop: loaded (max 8 devices) [ 21.983379] usb 4-1: new low speed USB device using uhci_hcd and address 2 [ 22.001582] ACPI Sony Notebook Control Driver v0.3 successfully installed [ 22.019053] sonypi: Sony Programmable I/O Controller Driver v1.26. [ 22.019225] sonypi: detected type3 model, verbose = 0, fnkeyinit = off, camera = off, compat = off, mask = 0xffffffff, useinput = on, acpi = on [ 22.019342] sonypi: enabled at irq=11, port1=0x1080, port2=0x1084 [ 22.019422] sonypi: device allocated minor is 63 [ 22.019537] input: Sony Vaio Jogdial as /class/input/input4 [ 22.019674] input: Sony Vaio Keys as /class/input/input5 [ 22.106584] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [email protected] [ 22.136391] usb 4-1: new device found, idVendor=054c, idProduct=01bb [ 22.136479] usb 4-1: new device strings: Mfr=0, Product=0, SerialNumber=0 [ 22.136664] usb 4-1: configuration #1 chosen from 1 choice [ 22.379003] usb 4-2: new full speed USB device using uhci_hcd and address 3 [ 22.584979] usb 4-2: new device found, idVendor=044e, idProduct=300c [ 22.585076] usb 4-2: new device strings: Mfr=1, Product=2, SerialNumber=0 [ 22.585160] usb 4-2: Product: UGX [ 22.585249] usb 4-2: Manufacturer: ALPS [ 22.585399] usb 4-2: configuration #1 chosen from 1 choice [ 22.670906] Bluetooth: Core ver 2.11 [ 22.671035] NET: Registered protocol family 31 [ 22.671114] Bluetooth: HCI device and connection manager initialized [ 22.671199] Bluetooth: HCI socket layer initialized [ 22.688799] Bluetooth: HCI USB driver ver 2.9 [ 22.691978] usbcore: registered new interface driver hci_usb [ 26.332403] scsi 2:0:0:0: Direct-Access Sony USB HS-CARD 4.52 PQ: 0 ANSI: 0 [ 26.382660] sd 2:0:0:0: Attached scsi removable disk sdb [ 26.383857] usb-storage: device scan complete [ 32.697299] sky2 eth0: enabling interface [ 32.699562] sky2 eth0: ram buffer 4K [ 34.363018] sky2 eth0: Link is up at 100 Mbps, half duplex, flow control none [ 34.858053] ip_tables: (C) 2000-2006 Netfilter Core Team [ 38.536595] SysRq : Show Pending Timers [ 38.536753] Timer List Version: v0.3 [ 38.536832] HRTIMER_MAX_CLOCK_BASES: 2 [ 38.536921] now at 25625437072 nsecs [ 38.536995] [ 38.536995] cpu: 0 [ 38.537138] clock 0: [ 38.537210] .index: 0 [ 38.537283] .resolution: 1 nsecs [ 38.537357] .get_time: ktime_get_real [ 38.537552] .offset: 1170412030250277102 nsecs [ 38.537627] active timers: [ 38.537700] clock 1: [ 38.537772] .index: 1 [ 38.537845] .resolution: 1 nsecs [ 38.537919] .get_time: ktime_get [ 38.538110] .offset: 0 nsecs [ 38.538184] active timers: [ 38.538257] #0: <c037fd90>, tick_sched_timer, S:01 [ 38.538632] # expires at 25744000000 nsecs [in 118562928 nsecs] [ 38.538709] .expires_next : 25744000000 nsecs [ 38.538785] .hres_active : 1 [ 38.538858] .nr_events : 832 [ 38.538932] .nohz_mode : 2 [ 38.539006] .idle_tick : 25600000000 nsecs [ 38.539081] .tick_stopped : 1 [ 38.539155] .idle_jiffies : 4294898695 [ 38.539230] .idle_calls : 8136 [ 38.539303] .idle_sleeps : 2806 [ 38.539377] .idle_entrytime : 25599683442 nsecs [ 38.539453] .idle_sleeptime : 21020446767 nsecs [ 38.539528] .last_jiffies : 4294898695 [ 38.539603] .next_jiffies : 4294898732 [ 38.539678] .idle_expires : 25744000000 nsecs [ 38.539754] jiffies: 4294898702 [ 38.539827] [ 38.539827] cpu: 1 [ 38.539970] clock 0: [ 38.540042] .index: 0 [ 38.540114] .resolution: 1 nsecs [ 38.540188] .get_time: ktime_get_real [ 38.540381] .offset: 1170412030250277102 nsecs [ 38.540456] active timers: [ 38.540529] clock 1: [ 38.540601] .index: 1 [ 38.540674] .resolution: 1 nsecs [ 38.540747] .get_time: ktime_get [ 38.540939] .offset: 0 nsecs [ 38.541012] active timers: [ 38.541085] #0: <c037fd90>, tick_sched_timer, S:01 [ 38.541456] # expires at 25804000000 nsecs [in 178562928 nsecs] [ 38.541534] .expires_next : 25804000000 nsecs [ 38.541609] .hres_active : 1 [ 38.541682] .nr_events : 309 [ 38.541756] .nohz_mode : 2 [ 38.541830] .idle_tick : 23808000000 nsecs [ 38.541905] .tick_stopped : 1 [ 38.541980] .idle_jiffies : 4294898247 [ 38.542054] .idle_calls : 1120 [ 38.542128] .idle_sleeps : 599 [ 38.542202] .idle_entrytime : 23804134269 nsecs [ 38.542278] .idle_sleeptime : 20142520988 nsecs [ 38.542354] .last_jiffies : 4294898247 [ 38.542428] .next_jiffies : 4294898747 [ 38.542503] .idle_expires : 25804000000 nsecs [ 38.542579] jiffies: 4294898702 [ 38.542652] [ 38.542723] [ 38.542724] Tick Device: mode: 1 [ 38.542868] Clock Event Device: pit [ 38.543000] max_delta_ns: 27461866 [ 38.543074] min_delta_ns: 12571 [ 38.543148] mult: 5124677 [ 38.543222] shift: 32 [ 38.543296] mode: 3 [ 38.543369] next_event: 25744000000 nsecs [ 38.543444] set_next_event: pit_next_event [ 38.543637] set_mode: init_pit_timer [ 38.543830] event_handler: tick_handle_oneshot_broadcast [ 38.544025] tick_broadcast_mask: 00000003 [ 38.544100] tick_broadcast_oneshot_mask: 00000003 [ 38.544175] [ 38.544246] [ 38.544247] Tick Device: mode: 1 [ 38.544391] Clock Event Device: lapic [ 38.544523] max_delta_ns: 805300686 [ 38.544597] min_delta_ns: 1439 [ 38.544671] mult: 44739553 [ 38.544745] shift: 32 [ 38.544818] mode: 1 [ 38.544892] next_event: 25744000000 nsecs [ 38.544966] set_next_event: lapic_next_event [ 38.545161] set_mode: lapic_timer_setup [ 38.545354] event_handler: hrtimer_interrupt [ 38.545546] [ 38.545547] Tick Device: mode: 1 [ 38.545690] Clock Event Device: lapic [ 38.545823] max_delta_ns: 805300686 [ 38.545897] min_delta_ns: 1439 [ 38.545971] mult: 44739553 [ 38.546045] shift: 32 [ 38.546118] mode: 1 [ 38.546191] next_event: 25804000000 nsecs [ 38.546266] set_next_event: lapic_next_event [ 38.546459] set_mode: lapic_timer_setup [ 38.546651] event_handler: hrtimer_interrupt [ 38.546844] [ 43.097678] NET: Registered protocol family 10 [ 54.028419] eth0: no IPv6 routers present [ 72.783796] Netfilter messages via NETLINK v0.30. [ 72.792104] nf_conntrack version 0.5.0 (8179 buckets, 65432 max) [ 93.040358] SysRq : Show Pending Timers [ 93.040516] Timer List Version: v0.3 [ 93.040596] HRTIMER_MAX_CLOCK_BASES: 2 [ 93.040684] now at 80181794744 nsecs [ 93.040759] [ 93.040759] cpu: 0 [ 93.040901] clock 0: [ 93.040973] .index: 0 [ 93.041046] .resolution: 1 nsecs [ 93.041119] .get_time: ktime_get_real [ 93.041315] .offset: 1170412030250277102 nsecs [ 93.041391] active timers: [ 93.041463] clock 1: [ 93.041536] .index: 1 [ 93.041608] .resolution: 1 nsecs [ 93.041681] .get_time: ktime_get [ 93.041873] .offset: 0 nsecs [ 93.041947] active timers: [ 93.042020] #0: <c037fd90>, tick_sched_timer, S:01 [ 93.042396] # expires at 80244000000 nsecs [in 62205256 nsecs] [ 93.042474] .expires_next : 80244000000 nsecs [ 93.042549] .hres_active : 1 [ 93.042623] .nr_events : 1384 [ 93.042697] .nohz_mode : 2 [ 93.042770] .idle_tick : 80164000000 nsecs [ 93.042846] .tick_stopped : 1 [ 93.042920] .idle_jiffies : 4294912337 [ 93.042995] .idle_calls : 24765 [ 93.043069] .idle_sleeps : 5493 [ 93.043143] .idle_entrytime : 80176068269 nsecs [ 93.043219] .idle_sleeptime : 75405772638 nsecs [ 93.043295] .last_jiffies : 4294912340 [ 93.043369] .next_jiffies : 4294912357 [ 93.043444] .idle_expires : 80244000000 nsecs [ 93.043520] jiffies: 4294912341 [ 93.043593] [ 93.043594] cpu: 1 [ 93.047898] clock 0: [ 93.047970] .index: 0 [ 93.048043] .resolution: 1 nsecs [ 93.048117] .get_time: ktime_get_real [ 93.048310] .offset: 1170412030250277102 nsecs [ 93.048386] active timers: [ 93.048459] clock 1: [ 93.048531] .index: 1 [ 93.048604] .resolution: 1 nsecs [ 93.048677] .get_time: ktime_get [ 93.048868] .offset: 0 nsecs [ 93.048942] active timers: [ 93.049015] #0: <c037fd90>, tick_sched_timer, S:01 [ 93.049387] # expires at 81804000000 nsecs [in 1622205256 nsecs] [ 93.049465] .expires_next : 81804000000 nsecs [ 93.049540] .hres_active : 1 [ 93.049613] .nr_events : 344 [ 93.049687] .nohz_mode : 2 [ 93.049761] .idle_tick : 79808000000 nsecs [ 93.049836] .tick_stopped : 1 [ 93.049910] .idle_jiffies : 4294912247 [ 93.049984] .idle_calls : 1211 [ 93.050059] .idle_sleeps : 689 [ 93.050132] .idle_entrytime : 79804094667 nsecs [ 93.050208] .idle_sleeptime : 76115837652 nsecs [ 93.050283] .last_jiffies : 4294912247 [ 93.050358] .next_jiffies : 4294912747 [ 93.050432] .idle_expires : 81804000000 nsecs [ 93.050508] jiffies: 4294912341 [ 93.050581] [ 93.050652] [ 93.050653] Tick Device: mode: 1 [ 93.050796] Clock Event Device: pit [ 93.050929] max_delta_ns: 27461866 [ 93.051004] min_delta_ns: 12571 [ 93.051077] mult: 5124677 [ 93.051151] shift: 32 [ 93.051224] mode: 3 [ 93.051297] next_event: 80244000000 nsecs [ 93.051372] set_next_event: pit_next_event [ 93.051566] set_mode: init_pit_timer [ 93.051758] event_handler: tick_handle_oneshot_broadcast [ 93.051953] tick_broadcast_mask: 00000003 [ 93.052027] tick_broadcast_oneshot_mask: 00000003 [ 93.052103] [ 93.052174] [ 93.052174] Tick Device: mode: 1 [ 93.052318] Clock Event Device: lapic [ 93.052451] max_delta_ns: 805300686 [ 93.052525] min_delta_ns: 1439 [ 93.052599] mult: 44739553 [ 93.052673] shift: 32 [ 93.052746] mode: 1 [ 93.052819] next_event: 80244000000 nsecs [ 93.052894] set_next_event: lapic_next_event [ 93.053088] set_mode: lapic_timer_setup [ 93.053280] event_handler: hrtimer_interrupt [ 93.053473] [ 93.053474] Tick Device: mode: 1 [ 93.053618] Clock Event Device: lapic [ 93.053750] max_delta_ns: 805300686 [ 93.053824] min_delta_ns: 1439 [ 93.053898] mult: 44739553 [ 93.053972] shift: 32 [ 93.054045] mode: 1 [ 93.054118] next_event: 81804000000 nsecs [ 93.054193] set_next_event: lapic_next_event [ 93.054386] set_mode: lapic_timer_setup [ 93.054578] event_handler: hrtimer_interrupt [ 93.054771] [ 163.063574] ACPI: Battery Slot [BAT1] (battery present) [ 163.071194] ACPI: AC Adapter [ACAD] (on-line) [ 163.079679] input: Lid Switch as /class/input/input6 [ 163.079854] ACPI: Lid Switch [LID0] [ 163.080022] input: Power Button (CM) as /class/input/input7 [ 163.080174] ACPI: Power Button (CM) [PWRB] [ 163.113964] ACPI: Thermal Zone [ATF0] (47 C) [ 163.115124] ACPI: Thermal Zone [DTS0] (47 C) [ 163.116289] ACPI: Thermal Zone [DTS1] (51 C) [ 166.417461] Installing knfsd (copyright (C) 1996 [email protected]). [ 166.517243] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 166.517485] NFSD: starting 90-second grace period [ 168.733062] Bluetooth: L2CAP ver 2.8 [ 168.733160] Bluetooth: L2CAP socket layer initialized [ 168.996893] Bluetooth: RFCOMM socket layer initialized [ 168.997001] Bluetooth: RFCOMM TTY layer initialized [ 168.997090] Bluetooth: RFCOMM ver 1.8
Signature · 2 lines
mattia :wq!
Re: dynticks + iptables almost stops the boot process [was: Re: 2.6.20-rc6-mm3]
Quoted 7 lines · Mattia Dongili
Quoted 2 lines
May I ask you for another test ? Please turn on high resolution timers and check, if the same strange behaviour is happening.
Yep, here we go again. Still seeing long stalls but no negative expires offset.
Actually one more test I did is disabling my iptables script and the boot process went fine. The script is just:
Mattia,
I have it halfways reproducible now and I'm working to find the root cause. Thanks for providing the info.
tglx
Re: dynticks + iptables almost stops the boot process [was: Re: 2.6.20-rc6-mm3]
Quoted 9 lines · Thomas Gleixner
Quoted 7 lines · Mattia Dongili
Quoted 2 lines
May I ask you for another test ? Please turn on high resolution timers and check, if the same strange behaviour is happening.
Yep, here we go again. Still seeing long stalls but no negative expires offset.
Actually one more test I did is disabling my iptables script and the boot process went fine. The script is just:
Quoted 4 lines
Mattia,
I have it halfways reproducible now and I'm working to find the root cause. Thanks for providing the info.
Great, I'm obviously available to test any patch :)
Signature · 2 lines
mattia :wq!
Re: dynticks + iptables almost stops the boot process [was: Re: 2.6.20-rc6-mm3]
Mattia,
Quoted 4 lines · Mattia Dongili
Quoted 2 lines
I have it halfways reproducible now and I'm working to find the root cause. Thanks for providing the info.
Great, I'm obviously available to test any patch :)
Could you try the patch below? The RCU serialization code (a rare call but can be common in some types of setups) has a nasty implicit dependency on the HZ tick - which until now was a hidden wart but became an explicit bug under dynticks. Maybe this is what is slowing down your box.
Ingo
------------------------->
Subject: [patch] dynticks: make sure synchronize_rcu() completes
From: Ingo Molnar <[email protected]>
synchronize_rcu() has a nasty implicit dependency on the HZ tick: it relies on another CPU finishing all RCU work so that this CPU can finish its RCU work too - in IRQ context. But wait_for_completion() goes to sleep indefinitely on dynticks and there might be no other IRQs to this CPU for a long time.
--- kernel/rcupdate.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)
kernel/rcupdate.c +7 -2
@@ -85,8 +85,13 @@ void synchronize_rcu(void)/* Will wake me after RCU finished */ call_rcu (&rcu.head, wakeme_after_rcu); -/* Wait for it */ -wait_for_completion (&rcu.completion); +/* +* Wait for it. Note: on dynticks RCU completion needs to be +* polled frequently, to make sure we finish work. If this CPU +* goes idle then another CPU cannot finish this CPU's work. +*/ +while (wait_for_completion_timeout (&rcu.completion,HZ /100 ? :1 ) ==0 ) +/* nothing */ ; }static void rcu_barrier_callback (struct rcu_head *notused)
Re: dynticks + iptables almost stops the boot process [was: Re: 2.6.20-rc6-mm3]
Quoted 8 lines · Ingo Molnar
Mattia,
Quoted 3 lines · Mattia Dongili
Quoted 2 lines
I have it halfways reproducible now and I'm working to find the root cause. Thanks for providing the info.
Quoted 7 lines
Quoted 1 line
Great, I'm obviously available to test any patch :)
Could you try the patch below? The RCU serialization code (a rare call but can be common in some types of setups) has a nasty implicit dependency on the HZ tick - which until now was a hidden wart but became an explicit bug under dynticks. Maybe this is what is slowing down your box.
No, not this. Anyway the last patch Thomas forwarded does fix the problem.
By the way, I have all the patches I received stacked up, if you want me to test some different combination, just ask.
Thanks
Signature · 2 lines
mattia :wq!
Re: dynticks + iptables almost stops the boot process [was: Re: 2.6.20-rc6-mm3]
Am 06.02.2007 20:28 schrieb Mattia Dongili:
Quoted 6 lines · Ingo Molnar
Quoted 5 lines
Could you try the patch below? The RCU serialization code (a rare call but can be common in some types of setups) has a nasty implicit dependency on the HZ tick - which until now was a hidden wart but became an explicit bug under dynticks. Maybe this is what is slowing down your box.
I have the same problem (huge delay when loading iptables) with 2.6.20-rc6-mm3, and for me this patch did fix it.
Quoted 2 lines
No, not this. Anyway the last patch Thomas forwarded does fix the problem.
Which one would that be? I might try it for comparison.
Thanks,
Tilman
Signature · 4 lines
Tilman Schmidt E-Mail: [email protected] Bonn, Germany Diese Nachricht besteht zu 100% aus wiederverwerteten Bits. Ungeöffnet mindestens haltbar bis: (siehe Rückseite)
Re: dynticks + iptables almost stops the boot process [was: Re: 2.6.20-rc6-mm3]
Quoted 4 lines · Tilman Schmidt
Quoted 2 lines
No, not this. Anyway the last patch Thomas forwarded does fix the problem.
Which one would that be? I might try it for comparison.
Find the combined patch of all fixlets on top of -mm3 below.
tglx
kernel/timer.c +3 -2
@@ -985,8 +985,9 @@ static int timekeeping_resume(struct sysif (now && (now > timekeeping_suspend_time)) {unsigned long sleep_length = now - timekeeping_suspend_time; + xtime.tv_sec += sleep_length; - jiffies_64 += (u64 )sleep_length *HZ ; + wall_to_monotonic.tv_sec -= sleep_length; }/* re-base the last cycle value */ clock->cycle_last =clocksource_read (clock);
@@ -994,7 +995,7 @@ static int timekeeping_resume(struct sys timekeeping_suspended =0 ;write_sequnlock_irqrestore (&xtime_lock, flags); -clockevents_notify (CLOCK_EVT_NOTIFY_RESUME ,NULL ); +touch_softlockup_watchdog ();/* Resume hrtimers */ clock_was_set ();
kernel/time/clockevents.c +8 -4
@@ -42,8 +42,8 @@ unsigned long clockevent_delta2ns(unsignu64 clc = ((u64 ) latch << evt->shift);do_div (clc, evt->mult); -if (clc <KTIME_MONOTONIC_RES .tv64) - clc =KTIME_MONOTONIC_RES .tv64; +if (clc <1000 ) + clc =1000 ;if (clc >LONG_MAX ) clc =LONG_MAX ;
@@ -72,18 +72,22 @@ void clockevents_set_mode(struct clock_e* * Returns 0 on success, -ETIME when the event is in the past. */ -int clockevents_program_event (struct clock_event_device *dev,ktime_t expires) +int clockevents_program_event (struct clock_event_device *dev,ktime_t expires, +ktime_t now) {unsigned long long clc;int64_t delta; - delta =ktime_to_ns (ktime_sub (expires,ktime_get ())); + delta =ktime_to_ns (ktime_sub (expires, now));if (delta <=0 )return -ETIME ; dev->next_event = expires; +if (dev->mode ==CLOCK_EVT_MODE_SHUTDOWN ) +return 0 ; +if (delta > dev->max_delta_ns) delta = dev->max_delta_ns;if (delta < dev->min_delta_ns)
kernel/time/tick-broadcast.c +30 -18
114 lines not on this page · raw message
include/linux/clockchips.h +1 -1
@@ -128,7 +128,7 @@ extern void clockevents_set_mode(structextern int clockevents_register_notifier (struct notifier_block *nb);extern void clockevents_unregister_notifier (struct notifier_block *nb);extern int clockevents_program_event (struct clock_event_device *dev, -ktime_t expires); +ktime_t expires,ktime_t now);extern void clockevents_notify (unsigned long reason,void *arg);
kernel/time/tick-common.c +2 -2
@@ -89,7 +89,7 @@ void tick_handle_periodic(struct clock_efor (;;) {ktime_t next =ktime_add (dev->next_event, tick_period); -if (!clockevents_program_event (dev, next)) +if (!clockevents_program_event (dev, next,ktime_get ()))return ;tick_periodic (cpu); }
@@ -120,7 +120,7 @@ void tick_setup_periodic(struct clock_evclockevents_set_mode (dev,CLOCK_EVT_MODE_ONESHOT );for (;;) { -if (!clockevents_program_event (dev, next)) +if (!clockevents_program_event (dev, next,ktime_get ()))return ; next =ktime_add (next, tick_period); }
kernel/time/tick-oneshot.c +5 -4
@@ -28,14 +28,15 @@int tick_program_event (ktime_t expires,int force) {struct clock_event_device *dev =__get_cpu_var (tick_cpu_device).evtdev; +ktime_t now =ktime_get ();while (1 ) { -int ret =clockevents_program_event (dev, expires); +int ret =clockevents_program_event (dev, expires, now);if (!ret || !force)return ret; - expires =ktime_add (expires, -ktime_set (0 , dev->min_delta_ns <<2 )); + now =ktime_get (); + expires =ktime_add (now,ktime_set (0 , dev->min_delta_ns)); } }
@@ -48,7 +49,7 @@ void tick_setup_oneshot(struct clock_eve { newdev->event_handler = handler;clockevents_set_mode (newdev,CLOCK_EVT_MODE_ONESHOT ); -clockevents_program_event (newdev, next_event); +clockevents_program_event (newdev, next_event,ktime_get ()); }/**
kernel/time/tick-sched.c +28 -8
@@ -137,13 +137,15 @@ __setup("nohz=", setup_tick_nohz);*/ void tick_nohz_update_jiffies (void ) { -struct tick_sched *ts = &__get_cpu_var (tick_cpu_sched); +int cpu =smp_processor_id (); +struct tick_sched *ts = &per_cpu (tick_cpu_sched, cpu);unsigned long flags;ktime_t now;if (!ts->tick_stopped)return ; +cpu_clear (cpu, nohz_cpu_mask); now =ktime_get ();local_irq_save (flags);
@@ -161,17 +163,24 @@ void tick_nohz_update_jiffies(void)void tick_nohz_stop_sched_tick (void ) {unsigned long seq, last_jiffies, next_jiffies, delta_jiffies, flags; -struct tick_sched *ts = &__get_cpu_var (tick_cpu_sched); +struct tick_sched *ts;ktime_t last_update, expires, now, delta; - -if (unlikely (ts->nohz_mode ==NOHZ_MODE_INACTIVE )) -return ; +int cpu;local_irq_save (flags); + cpu =smp_processor_id (); + ts = &per_cpu (tick_cpu_sched, cpu); + +if (unlikely (ts->nohz_mode ==NOHZ_MODE_INACTIVE )) + goto end; +if (need_resched ()) goto end; + cpu =smp_processor_id (); +BUG_ON (local_softirq_pending ()); + now =ktime_get ();/* * When called from irq_exit we need to account the idle sleep time
@@ -196,12 +205,20 @@ void tick_nohz_stop_sched_tick(void) next_jiffies =get_next_timer_interrupt (last_jiffies); delta_jiffies = next_jiffies - last_jiffies; -/* Do not stop the tick, if we are only one off */ -if (!ts->tick_stopped && delta_jiffies ==1 ) +/* +* Do not stop the tick, if we are only one off +* or if the cpu is required for rcu +*/ +if (!ts->tick_stopped && (delta_jiffies ==1 ||rcu_needs_cpu (cpu))) goto out;/* Schedule the tick, if we are at least one jiffie off */ if ((long )delta_jiffies >=1 ) { + +if (rcu_needs_cpu (cpu)) + delta_jiffies =1 ; +else +cpu_set (cpu, nohz_cpu_mask);/* * nohz_stop_sched_tick can be called several times before * the nohz_restart_sched_tick is called. This happens when
@@ -237,6 +254,7 @@ void tick_nohz_stop_sched_tick(void)* softirq. */ tick_do_update_jiffies64 (ktime_get ()); +cpu_clear (cpu, nohz_cpu_mask); }raise_softirq_irqoff (TIMER_SOFTIRQ ); out:
@@ -253,7 +271,8 @@ end:*/ void tick_nohz_restart_sched_tick (void ) { -struct tick_sched *ts = &__get_cpu_var (tick_cpu_sched); +int cpu =smp_processor_id (); +struct tick_sched *ts = &per_cpu (tick_cpu_sched, cpu);unsigned long ticks;ktime_t now, delta;
@@ -265,6 +284,7 @@ void tick_nohz_restart_sched_tick(void)local_irq_disable ();tick_do_update_jiffies64 (now); +cpu_clear (cpu, nohz_cpu_mask);/* Account the idle time */ delta =ktime_sub (now, ts->idle_entrytime);
Re: dynticks + iptables almost stops the boot process [was: Re: 2.6.20-rc6-mm3]
Quoted 7 lines · On Wed, 07 Feb 2007 00:17:33 +0100 Thomas Gleixner <[email protected]> wrote:
Quoted 4 lines · Tilman Schmidt
Quoted 2 lines
No, not this. Anyway the last patch Thomas forwarded does fix the problem.
Which one would that be? I might try it for comparison.
Find the combined patch of all fixlets on top of -mm3 below.
err, I don't have most of this.
I just uploaded the crappile-of-the-moment to
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/mm/broken-out-2007-02-06-16-59.tar.gz
Re: dynticks + iptables almost stops the boot process [was: Re: 2.6.20-rc6-mm3]
Quoted 7 lines · Andrew Morton
Quoted 4 lines · On Wed, 07 Feb 2007 00:17:33 +0100 Thomas Gleixner <[email protected]> wrote:
Quoted 3 lines · Tilman Schmidt
Quoted 2 lines
No, not this. Anyway the last patch Thomas forwarded does fix the problem.
Quoted 8 lines
Quoted 3 lines
Quoted 1 line
Which one would that be? I might try it for comparison.
Find the combined patch of all fixlets on top of -mm3 below.
err, I don't have most of this.
I just uploaded the crappile-of-the-moment to
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/mm/broken-out-2007-02-06-16-59.tar.gz
hm:
ERROR 404: Not Found.
pls. do:
ssh master.kernel.org chmod a+r /pub/linux/kernel/people/akpm/mm/broken-out-2007-02-06-16-59.tar.gz
Ingo
Quoted 10 lines · Thomas Gleixner
Quoted 8 lines · Thomas Gleixner
Quoted 1 line · Mattia Dongili
yes, slowness is gone. Any useful information I can provide?
Can you please try with
CONFIG_ACPI_PROCESSOR=yinstead of =m ? This should make the slowness go away too.I think I know what happens. I try to reproduce with
CONFIG_ACPI_PROCESSOR=m.
Quoted 6 lines
Hmm. Not reproducible on my jinxed Sony.
It might be helpful if you could try with your original config again. Please enable printk timestamps and SysRq. Once the slowness kicks in please issue a SysRq-Q, so we can look at the internal state of the tick code.
BTW: booting with clocksource=pmtmr make it proceed a little better but I still experience stalls:
[ 0.000000] Linux version 2.6.20-rc6-mm3-1 (mattia@tadamune) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #7 SMP Thu Feb 1 21:44:52 CET 2007 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] sanitize start [ 0.000000] sanitize end [ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2 [ 0.000000] copy_e820_map() start: 00000000000dc000 size: 0000000000024000 end: 0000000000100000 type: 2 [ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000003fd70000 end: 000000003fe70000 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000003fe70000 size: 0000000000090000 end: 000000003ff00000 type: 4 [ 0.000000] copy_e820_map() start: 000000003ff00000 size: 0000000000100000 end: 0000000040000000 type: 2 [ 0.000000] copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2 [ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2 [ 0.000000] copy_e820_map() start: 00000000fed14000 size: 0000000000006000 end: 00000000fed1a000 type: 2 [ 0.000000] copy_e820_map() start: 00000000fed1c000 size: 0000000000074000 end: 00000000fed90000 type: 2 [ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2 [ 0.000000] copy_e820_map() start: 00000000ff000000 size: 0000000001000000 end: 0000000100000000 type: 2 [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fe70000 (usable) [ 0.000000] BIOS-e820: 000000003fe70000 - 000000003ff00000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] 126MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f6480 [ 0.000000] Entering add_active_range(0, 0, 261744) 0 entries of 256 used [ 0.000000] sizeof(struct page) = 32 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 261744 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 261744 [ 0.000000] On node 0 totalpages: 261744 [ 0.000000] Node 0 memmap at 0xc1000000 size 8388608 first pfn 0xc1000000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 252 pages used for memmap [ 0.000000] HighMem zone: 32116 pages, LIFO batch:7 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP @ 0x000f63b0/0x0014 (v000 PTLTD ) [ 0.000000] ACPI: RSDT @ 0x3fe764ef/0x0048 (v001 Sony N0 0x20060710 PTL 0x00000000) [ 0.000000] ACPI: FACP @ 0x3fe7ddde/0x0084 (v002 Sony N0 0x20060710 PTL 0x0000005A) [ 0.000000] ACPI: DSDT @ 0x3fe77e33/0x5FAB (v001 Sony N0 0x20060710 PTL 0x0100000E) [ 0.000000] ACPI: FACS @ 0x3fe7efc0/0x0040 [ 0.000000] ACPI: APIC @ 0x3fe7de62/0x0068 (v001 Sony N0 0x20060710 PTL 0x0000005A) [ 0.000000] ACPI: BOOT @ 0x3fe7dfd8/0x0028 (v001 Sony N0 0x20060710 PTL 0x00000001) [ 0.000000] ACPI: MCFG @ 0x3fe7df02/0x003C (v001 Sony N0 0x20060710 PTL 0x0000005A) [ 0.000000] ACPI: TCPA @ 0x3fe7df3e/0x0032 (v001 Sony N0 0x20060710 PTL 0x00005A52) [ 0.000000] ACPI: APIC @ 0x3fe7df70/0x0068 (v001 Sony N0 0x20060710 PTL 0x00000000) [ 0.000000] ACPI: SSDT @ 0x3fe776b1/0x077E (v001 Sony N0 0x20060710 PTL 0x20050624) [ 0.000000] ACPI: SSDT @ 0x3fe76ee6/0x07CB (v001 Sony N0 0x20060710 PTL 0x20050624) [ 0.000000] ACPI: SSDT @ 0x3fe76537/0x04E2 (v001 Sony N0 0x20060710 PTL 0x20050624) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) [ 0.000000] Detected 1833.715 MHz processor. [ 12.852448] Built 1 zonelists. Total pages: 259700 [ 12.852452] Kernel command line: root=/dev/sda3 ro vga=extended resume=/dev/sda5 clocksource=pmtmr [ 12.852618] mapped APIC to ffffd000 (fee00000) [ 12.852620] mapped IOAPIC to ffffc000 (fec00000) [ 12.852623] Enabling fast FPU save and restore... done. [ 12.852625] Enabling unmasked SIMD FPU exception support... done. [ 12.852632] Initializing CPU#0 [ 12.852688] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 12.858053] Console: colour VGA+ 80x50 [ 12.863852] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 12.864198] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 12.886662] Memory: 1034188k/1046976k available (1864k kernel code, 12244k reserved, 687k data, 212k init, 129472k highmem) [ 12.886766] virtual kernel memory layout: [ 12.886767] fixmap : 0xfff9d000 - 0xfffff000 ( 392 kB) [ 12.886768] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 12.886769] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 12.886770] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 12.886771] .init : 0xc0384000 - 0xc03b9000 ( 212 kB) [ 12.886772] .data : 0xc02d23c1 - 0xc037dff4 ( 687 kB) [ 12.886773] .text : 0xc0100000 - 0xc02d23c1 (1864 kB) [ 12.887372] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 12.967554] Calibrating delay using timer specific routine.. 3671.23 BogoMIPS (lpj=7342463) [ 12.967735] Security Framework v1.0.0 initialized [ 12.967814] Capability LSM initialized [ 12.967897] Mount-cache hash table entries: 512 [ 12.968053] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 [ 12.968059] monitor/mwait feature present. [ 12.968133] using mwait in idle threads. [ 12.968210] CPU: L1 I cache: 32K, L1 D cache: 32K [ 12.968344] CPU: L2 cache: 2048K [ 12.968418] CPU: Physical Processor ID: 0 [ 12.968492] CPU: Processor Core ID: 0 [ 12.968567] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 [ 12.968573] Intel machine check architecture supported. [ 12.968650] Intel machine check reporting enabled on CPU#0. [ 12.968729] Compat vDSO mapped to ffffe000. [ 12.968811] Checking 'hlt' instruction... OK. [ 12.983667] SMP alternatives: switching to UP code [ 12.983895] ACPI: Core revision 20070126 [ 12.990057] Parsing all Control Methods: [ 12.990288] Table [DSDT](id 0001) - 923 Objects with 104 Devices 193 Methods 29 Regions [ 12.990575] Parsing all Control Methods: [ 12.990762] Table [SSDT](id 0002) - 13 Objects with 3 Devices 4 Methods 0 Regions [ 12.991054] Parsing all Control Methods: [ 12.991245] Table [SSDT](id 0003) - 14 Objects with 3 Devices 5 Methods 0 Regions [ 12.991549] Parsing all Control Methods: [ 12.991743] Table [SSDT](id 0004) - 13 Objects with 0 Devices 4 Methods 0 Regions [ 12.991900] tbxface-0586 [02] tb_load_namespace : ACPI Tables successfully acquired [ 12.995677] evxfevnt-0091 [02] enable : Transition to ACPI mode successful [ 12.995902] CPU0: Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz stepping 06 [ 12.996109] SMP alternatives: switching to SMP code [ 12.996200] Booting processor 1/1 eip 3000 [ 13.006792] Initializing CPU#1 [ 13.087450] Calibrating delay using timer specific routine.. 3667.18 BogoMIPS (lpj=7334374) [ 13.087455] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 [ 13.087460] monitor/mwait feature present. [ 13.087463] CPU: L1 I cache: 32K, L1 D cache: 32K [ 13.087465] CPU: L2 cache: 2048K [ 13.087467] CPU: Physical Processor ID: 0 [ 13.087468] CPU: Processor Core ID: 1 [ 13.087469] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 [ 13.087474] Intel machine check architecture supported. [ 13.087477] Intel machine check reporting enabled on CPU#1. [ 13.087854] CPU1: Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz stepping 06 [ 13.088735] Total of 2 processors activated (7338.41 BogoMIPS). [ 13.089010] ENABLING IO-APIC IRQs [ 13.089282] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 13.363220] APIC calibration not consistent with PM Timer: 228ms instead of 100ms [ 13.363311] APIC delta adjusted to PM-Timer: 1041739 (2375306) [ 13.471425] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 13.491558] Brought up 2 CPUs [ 13.680628] migration_cost=59 [ 13.680999] NET: Registered protocol family 16 [ 13.681152] ACPI: bus type pci registered [ 13.681235] PCI: Using MMCONFIG [ 13.682146] Setting up standard PCI resources [ 13.687025] evgpeblk-0952 [04] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 [ 13.688004] evgpeblk-1049 [03] ev_initialize_gpe_bloc: Found 8 Wake, Enabled 5 Runtime GPEs in this block [ 13.688919] Completing Region/Field/Buffer/Package initialization:......................................................................... [ 13.694826] Initialized 29/29 Regions 4/4 Fields 29/29 Buffers 11/38 Packages (972 nodes) [ 13.694985] Initializing Device/Processor/Thermal objects by executing _INI methods:... [ 13.696264] Executed 3 _INI methods requiring 2 _STA executions (examined 117 objects) [ 13.696438] ACPI: Interpreter enabled [ 13.696512] ACPI: Using IOAPIC for interrupt routing [ 13.696671] Found System \ [ffffffff] [ 13.696724] Found Processor \_PR_.CPU0 [c1907dd8] [ 13.696769] Found Processor \_PR_.CPU1 [c1907dc4] [ 13.696835] Found Device \_SB_ [c19073c4] [ 13.696892] Found Device \_SB_.LID0 [c190da40] [ 13.696956] Found Device \_SB_.PWRB [c190da04] [ 13.697018] Found Device \_SB_.PCI0 [c190d9a0] [ 13.697086] Found Device \_SB_.PCI0.PDRC [c190d7c0] [ 13.697148] Found Device \_SB_.PCI0.PEGP [c190dfcc] [ 13.697213] Found Device \_SB_.PCI0.GFX0 [c190df90] [ 13.697283] Found Device \_SB_.PCI0.HDEF [c190df68] [ 13.697345] Found Device \_SB_.PCI0.RP01 [c190df04] [ 13.697415] Found Device \_SB_.PCI0.RP01.S1F0 [c190de50] [ 13.697485] Found Device \_SB_.PCI0.RP01.S1F1 [c190ddec] [ 13.697552] Found Device \_SB_.PCI0.RP01.S1F2 [c190dd88] [ 13.697626] Found Device \_SB_.PCI0.RP01.S1F3 [c190dd24] [ 13.697693] Found Device \_SB_.PCI0.RP01.S1F4 [c190dcc0] [ 13.697762] Found Device \_SB_.PCI0.RP01.S1F5 [c190dc5c] [ 13.697831] Found Device \_SB_.PCI0.RP01.S1F6 [c190f748] [ 13.697902] Found Device \_SB_.PCI0.RP01.S1F7 [c190f6e4] [ 13.697967] Found Device \_SB_.PCI0.RP02 [c190f66c] [ 13.698140] Found Device \_SB_.PCI0.RP02.WLAN [c190f5b8] [ 13.698205] Found Device \_SB_.PCI0.RP03 [c190f52c] [ 13.698275] Found Device \_SB_.PCI0.RP03.TLAN [c190f464] [ 13.698339] Found Device \_SB_.PCI0.RP04 [c190f414] [ 13.698407] Found Device \_SB_.PCI0.RP04.DLAN [c190f34c] [ 13.698470] Found Device \_SB_.PCI0.RP04.S4F1 [c190f2e8] [ 13.698534] Found Device \_SB_.PCI0.RP04.S4F2 [c190fc0c] [ 13.698597] Found Device \_SB_.PCI0.RP04.S4F3 [c190fbd0] [ 13.698659] Found Device \_SB_.PCI0.RP04.S4F4 [c190fb94] [ 13.698719] Found Device \_SB_.PCI0.RP04.S4F5 [c190fb58] [ 13.698782] Found Device \_SB_.PCI0.RP04.S4F6 [c190fb1c] [ 13.698845] Found Device \_SB_.PCI0.RP04.S4F7 [c190fae0] [ 13.698913] Found Device \_SB_.PCI0.RP05 [c190faa4] [ 13.698975] Found Device \_SB_.PCI0.RP05.EX2P [c190f9dc] [ 13.699037] Found Device \_SB_.PCI0.RP05.S5F1 [c190f978] [ 13.699100] Found Device \_SB_.PCI0.RP05.S5F2 [c190f93c] [ 13.699166] Found Device \_SB_.PCI0.RP05.S5F3 [c190f900] [ 13.699228] Found Device \_SB_.PCI0.RP05.S5F4 [c190f8c4] [ 13.699294] Found Device \_SB_.PCI0.RP05.S5F5 [c190f888] [ 13.699355] Found Device \_SB_.PCI0.RP05.S5F6 [c190f84c] [ 13.699418] Found Device \_SB_.PCI0.RP05.S5F7 [c190f810] [ 13.699483] Found Device \_SB_.PCI0.RP06 [c190f7d4] [ 13.699559] Found Device \_SB_.PCI0.RP06.S6F0 [c190ffa4] [ 13.699627] Found Device \_SB_.PCI0.RP06.S6F1 [c190ff40] [ 13.699699] Found Device \_SB_.PCI0.RP06.S6F2 [c190fedc] [ 13.699768] Found Device \_SB_.PCI0.RP06.S6F3 [c190fe78] [ 13.699837] Found Device \_SB_.PCI0.RP06.S6F4 [c190fe14] [ 13.699907] Found Device \_SB_.PCI0.RP06.S6F5 [c190fdb0] [ 13.699976] Found Device \_SB_.PCI0.RP06.S6F6 [c190fd4c] [ 13.700045] Found Device \_SB_.PCI0.RP06.S6F7 [c190fce8] [ 13.700119] Found Device \_SB_.PCI0.USB1 [c190fc70] [ 13.700190] Found Device \_SB_.PCI0.USB2 [c1910748] [ 13.700260] Found Device \_SB_.PCI0.USB3 [c19106d0] [ 13.700330] Found Device \_SB_.PCI0.USB4 [c1910658] [ 13.700402] Found Device \_SB_.PCI0.USB7 [c19105e0] [ 13.700464] Found Device \_SB_.PCI0.USB7.HUB7 [c19105b8] [ 13.700531] Found Device \_SB_.PCI0.USB7.HUB7.PRT1 [c1910590] [ 13.700593] Found Device \_SB_.PCI0.USB7.HUB7.PRT2 [c1910568] [ 13.700656] Found Device \_SB_.PCI0.USB7.HUB7.PRT3 [c1910540] [ 13.700719] Found Device \_SB_.PCI0.USB7.HUB7.PRT4 [c1910518] [ 13.700782] Found Device \_SB_.PCI0.USB7.HUB7.PRT5 [c19104f0] [ 13.700844] Found Device \_SB_.PCI0.USB7.HUB7.PRT6 [c19104c8] [ 13.700910] Found Device \_SB_.PCI0.USB7.HUB7.PRT7 [c19104a0] [ 13.700972] Found Device \_SB_.PCI0.USB7.HUB7.PRT8 [c1910478] [ 13.701038] Found Device \_SB_.PCI0.PCIB [c191043c] [ 13.701111] Found Device \_SB_.PCI0.PCIB.SLT0 [c1910414] [ 13.701182] Found Device \_SB_.PCI0.PCIB.LANC [c19103d8] [ 13.701350] Found Device \_SB_.PCI0.PCIB.CRD2 [c191039c] [ 13.701424] Found Device \_SB_.PCI0.PCIB.S294 [c19102c0] [ 13.701487] Found Device \_SB_.PCI0.PCIB.MST2 [c1910bf8] [ 13.701655] Found Device \_SB_.PCI0.PCIB.CRD0 [c1910bd0] [ 13.701724] Found Device \_SB_.PCI0.PCIB.SD94 [c1910af4] [ 13.701788] Found Device \_SB_.PCI0.PCIB.MMST [c1910acc] [ 13.701852] Found Device \_SB_.PCI0.AUD0 [c1910a90] [ 13.701918] Found Device \_SB_.PCI0.MODM [c1910a68] [ 13.701984] Found Device \_SB_.PCI0.LPCB [c1910a40] [ 13.702199] Found Device \_SB_.PCI0.LPCB.LNKA [c19108ec] [ 13.702396] Found Device \_SB_.PCI0.LPCB.LNKB [c191084c] [ 13.702595] Found Device \_SB_.PCI0.LPCB.LNKC [c19107ac] [ 13.702791] Found Device \_SB_.PCI0.LPCB.LNKD [c1910f90] [ 13.702987] Found Device \_SB_.PCI0.LPCB.LNKE [c1910ef0] [ 13.703203] Found Device \_SB_.PCI0.LPCB.LNKF [c1910e50] [ 13.703397] Found Device \_SB_.PCI0.LPCB.LNKG [c1910db0] [ 13.703592] Found Device \_SB_.PCI0.LPCB.LNKH [c1910d10] [ 13.703665] Found Device \_SB_.PCI0.LPCB.EC0_ [c1910c70] [ 13.707695] Found Device \_SB_.PCI0.LPCB.EC0_.BAT1 [c1911a18] [ 13.707856] Found Device \_SB_.PCI0.LPCB.EC0_.ACAD [c1911950] [ 13.707917] Found Device \_SB_.PCI0.LPCB.DMAC [c19118ec] [ 13.707978] Found Device \_SB_.PCI0.LPCB.FWHD [c19118b0] [ 13.708134] Found Device \_SB_.PCI0.LPCB.IPIC [c19117fc] [ 13.708194] Found Device \_SB_.PCI0.LPCB.MATH [c19117c0] [ 13.708253] Found Device \_SB_.PCI0.LPCB.LDRC [c1911784] [ 13.708318] Found Device \_SB_.PCI0.LPCB.RTC_ [c1911f90] [ 13.708377] Found Device \_SB_.PCI0.LPCB.TIMR [c1911f54] [ 13.708559] Found Device \_SB_.PCI0.LPCB.TPM_ [c1911f18] [ 13.712558] Found Device \_SB_.PCI0.LPCB.SPIC [c1911ea0] [ 13.712624] Found Device \_SB_.PCI0.LPCB.SNC_ [c1911dd8] [ 13.712689] Found Device \_SB_.PCI0.LPCB.PS2K [c1913748] [ 13.712754] Found Device \_SB_.PCI0.LPCB.PS2M [c191370c] [ 13.712830] Found Device \_SB_.PCI0.PATA [c19136bc] [ 13.712897] Found Device \_SB_.PCI0.PATA.PRID [c19135a4] [ 13.712961] Found Device \_SB_.PCI0.PATA.PRID.P_D0 [c1913554] [ 13.713023] Found Device \_SB_.PCI0.PATA.PRID.P_D1 [c1913518] [ 13.713089] Found Device \_SB_.PCI0.SATA [c191348c] [ 13.713161] Found Device \_SB_.PCI0.SATA.PRID [c19139dc] [ 13.713223] Found Device \_SB_.PCI0.SATA.PRID.P_D0 [c191398c] [ 13.713285] Found Device \_SB_.PCI0.SATA.PRID.P_D1 [c1913950] [ 13.713349] Found Device \_SB_.PCI0.SATA.SECD [c19138d8] [ 13.713417] Found Device \_SB_.PCI0.SATA.SECD.S_D0 [c1913888] [ 13.713480] Found Device \_SB_.PCI0.SATA.SECD.S_D1 [c1913838] [ 13.713549] Found Device \_SB_.PCI0.SBUS [c1913310] [ 13.715581] Found Thermal Zone \_TZ_ [c190739c] [ 13.715664] Found Thermal Zone \_TZ_.ATF0 [c190d4a0] [ 13.715713] Found Thermal Zone \_TZ_.DTS0 [c190d3ec] [ 13.715759] Found Thermal Zone \_TZ_.DTS1 [c190d34c] [ 13.716098] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 13.716797] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 13.716877] PCI quirk: region 1180-11bf claimed by ICH6 GPIO [ 13.717191] Boot video device is 0000:01:00.0 [ 13.718224] PCI: Transparent bridge - 0000:00:1e.0 [ 13.718369] PCI: Bus #0a (-#0d) is hidden behind transparent bridge #09 (-#0a) (try 'pci=assign-busses') [ 13.722639] Please report the result to linux-kernel to fix this permanently [ 13.722792] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 13.723351] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] [ 13.723596] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 13.723843] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 13.724079] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 13.724314] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 13.724582] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 13.731518] ACPI: PCI Interrupt Link [LNKA] (IRQs 10) *5 [ 13.731995] ACPI: PCI Interrupt Link [LNKB] (IRQs *10) [ 13.732413] ACPI: PCI Interrupt Link [LNKC] (IRQs *10) [ 13.732831] ACPI: PCI Interrupt Link [LNKD] (IRQs *10) [ 13.733248] ACPI: PCI Interrupt Link [LNKE] (IRQs 10) *0, disabled. [ 13.733784] ACPI: PCI Interrupt Link [LNKF] (IRQs *10) [ 13.734202] ACPI: PCI Interrupt Link [LNKG] (IRQs *10) [ 13.734619] ACPI: PCI Interrupt Link [LNKH] (IRQs *10) [ 13.735008] Linux Plug and Play Support v0.97 (c) Adam Belay [ 13.735096] pnp: PnP ACPI init [ 13.738478] pnp: PnP ACPI: found 11 devices [ 13.738556] PnPBIOS: Disabled by ACPI PNP [ 13.738747] SCSI subsystem initialized [ 13.738855] libata version 2.00 loaded. [ 13.738908] PCI: Using ACPI for IRQ routing [ 13.738983] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 13.739241] NET: Registered protocol family 8 [ 13.739317] NET: Registered protocol family 20 [ 13.739429] pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved [ 13.739519] pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved [ 13.739609] pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved [ 13.739699] pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved [ 13.740061] PCI: Failed to allocate mem resource #6:20000@d0000000 for 0000:01:00.0 [ 13.740151] PCI: Bridge: 0000:00:01.0 [ 13.740225] IO window: disabled. [ 13.740300] MEM window: dc000000-ddffffff [ 13.740375] PREFETCH window: c0000000-cfffffff [ 13.740451] PCI: Bridge: 0000:00:1c.0 [ 13.740526] IO window: 2000-2fff [ 13.740604] MEM window: d6000000-d7ffffff [ 13.740682] PREFETCH window: d0000000-d1ffffff [ 13.740760] PCI: Bridge: 0000:00:1c.1 [ 13.740834] IO window: disabled. [ 13.740912] MEM window: de100000-de1fffff [ 13.740989] PREFETCH window: disabled. [ 13.741066] PCI: Bridge: 0000:00:1c.2 [ 13.741142] IO window: 3000-3fff [ 13.741219] MEM window: d8000000-d9ffffff [ 13.741297] PREFETCH window: d2000000-d3ffffff [ 13.741376] PCI: Bridge: 0000:00:1c.3 [ 13.741451] IO window: 4000-4fff [ 13.741528] MEM window: da000000-dbffffff [ 13.741606] PREFETCH window: d4000000-d5ffffff [ 13.741691] PCI: Bus 10, cardbus bridge: 0000:09:04.0 [ 13.741766] IO window: 00005000-000050ff [ 13.741844] IO window: 00005400-000054ff [ 13.741923] PREFETCH window: 50000000-53ffffff [ 13.742002] MEM window: 54000000-57ffffff [ 13.742079] PCI: Bridge: 0000:00:1e.0 [ 13.742155] IO window: 5000-5fff [ 13.742232] MEM window: de000000-de0fffff [ 13.742310] PREFETCH window: 50000000-53ffffff [ 13.742395] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 13.742546] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 13.742565] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 13.742715] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 13.742736] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 13.742886] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 13.742907] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 13.743057] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 13.743080] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 [ 13.743231] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 13.743243] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 13.743265] ACPI: PCI Interrupt 0000:09:04.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 13.743437] NET: Registered protocol family 2 [ 13.783050] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 13.783200] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 13.783750] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 13.784066] TCP: Hash tables configured (established 131072 bind 65536) [ 13.784144] TCP reno registered [ 13.795233] Simple Boot Flag at 0x37 set to 0x1 [ 13.795715] audit: initializing netlink socket (disabled) [ 13.795802] audit(1170365468.500:1): initialized [ 13.795948] highmem bounce pool size: 64 pages [ 13.796142] JFS: nTxBlock = 8080, nTxLock = 64646 [ 13.799486] io scheduler noop registered [ 13.799625] io scheduler anticipatory registered [ 13.799759] io scheduler deadline registered [ 13.799902] io scheduler cfq registered (default) [ 13.800382] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 13.800399] assign_interrupt_mode Found MSI capability [ 13.800498] Allocate Port Service[0000:00:01.0:pcie00] [ 13.800534] Allocate Port Service[0000:00:01.0:pcie03] [ 13.800592] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 13.800644] assign_interrupt_mode Found MSI capability [ 13.800755] Allocate Port Service[0000:00:1c.0:pcie00] [ 13.800784] Allocate Port Service[0000:00:1c.0:pcie02] [ 13.800811] Allocate Port Service[0000:00:1c.0:pcie03] [ 13.800922] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 13.800973] assign_interrupt_mode Found MSI capability [ 13.801084] Allocate Port Service[0000:00:1c.1:pcie00] [ 13.801116] Allocate Port Service[0000:00:1c.1:pcie02] [ 13.801144] Allocate Port Service[0000:00:1c.1:pcie03] [ 13.801252] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 13.801303] assign_interrupt_mode Found MSI capability [ 13.801415] Allocate Port Service[0000:00:1c.2:pcie00] [ 13.801444] Allocate Port Service[0000:00:1c.2:pcie02] [ 13.801472] Allocate Port Service[0000:00:1c.2:pcie03] [ 13.801580] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 13.801632] assign_interrupt_mode Found MSI capability [ 13.801743] Allocate Port Service[0000:00:1c.3:pcie00] [ 13.801775] Allocate Port Service[0000:00:1c.3:pcie02] [ 13.801804] Allocate Port Service[0000:00:1c.3:pcie03] [ 13.802646] ACPI: SSDT @ 0x3fe76cb5/0x01A8 (v001 Sony N0 0x20060710 PTL 0x20050624) [ 13.802919] Parsing all Control Methods: [ 13.803167] Table [SSDT](id 0075) - 5 Objects with 0 Devices 3 Methods 0 Regions [ 13.803529] ACPI: SSDT @ 0x3fe76a19/0x0217 (v001 Sony N0 0x20060710 PTL 0x20050624) [ 13.803763] Parsing all Control Methods: [ 13.804003] Table [SSDT](id 0076) - 1 Objects with 0 Devices 1 Methods 0 Regions [ 13.805209] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 13.805462] ACPI: Processor [CPU0] (supports 8 throttling states) [ 13.806224] ACPI: SSDT @ 0x3fe76e5d/0x0089 (v001 Sony N0 0x20060710 PTL 0x20050624) [ 13.806475] Parsing all Control Methods: [ 13.806717] Table [SSDT](id 007B) - 3 Objects with 0 Devices 3 Methods 0 Regions [ 13.807071] ACPI: SSDT @ 0x3fe76c30/0x0085 (v001 Sony N0 0x20060710 PTL 0x20050624) [ 13.807304] Parsing all Control Methods: [ 13.807545] Table [SSDT](id 007C) - 1 Objects with 0 Devices 1 Methods 0 Regions [ 13.808555] ACPI: CPU1 (power states: C1[C1] C2[C2]) [ 13.808809] ACPI: Processor [CPU1] (supports 8 throttling states) [ 13.812098] isapnp: Scanning for PnP cards... [ 14.166397] isapnp: No Plug & Play device found [ 14.169415] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled [ 14.170693] RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize [ 14.170867] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 14.170946] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 14.171065] ICH7: IDE controller at PCI slot 0000:00:1f.1 [ 14.171153] ACPI: PCI Interrupt 0000:00:1f.1[B] -> GSI 22 (level, low) -> IRQ 21 [ 14.171305] ICH7: chipset revision 2 [ 14.171379] ICH7: not 100% native mode: will probe irqs later [ 14.171463] ide0: BM-DMA at 0x1880-0x1887, BIOS settings: hda:DMA, hdb:pio [ 14.171678] Probing IDE interface ide0... [ 14.904601] hda: MATSHITADVD-RAM UJ-842S, ATAPI CD/DVD-ROM drive [ 15.240023] hda: selected mode 0x42 [ 15.240354] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 15.242981] ata_piix 0000:00:1f.2: version 2.00ac7 [ 15.242986] ata_piix 0000:00:1f.2: MAP [ P0 P2 XX XX ] [ 15.243355] ata_piix 0000:00:1f.2: invalid MAP value 0 [ 15.395890] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 22 (level, low) -> IRQ 21 [ 15.396062] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 15.396120] ata1: SATA max UDMA/133 cmd 0x18C8 ctl 0x18AE bmdma 0x18B0 irq 21 [ 15.396235] ata2: SATA max UDMA/133 cmd 0x18C0 ctl 0x18AA bmdma 0x18B8 irq 21 [ 15.396323] scsi0 : ata_piix [ 15.570638] ata1.00: ATA-6, max UDMA/100, 195371568 sectors: LBA48 NCQ (depth 0/32) [ 15.570735] ata1.00: ata1: dev 0 multi count 16 [ 15.586332] ata1.00: configured for UDMA/100 [ 15.586419] scsi1 : ata_piix [ 15.750829] ATA: abnormal status 0x7F on port 0x18C7 [ 15.750986] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1032GS AS02 PQ: 0 ANSI: 5 [ 15.751171] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB) [ 15.751257] sda: Write Protect is off [ 15.751332] sda: Mode Sense: 00 3a 00 00 [ 15.751346] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 15.751470] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB) [ 15.751554] sda: Write Protect is off [ 15.755800] sda: Mode Sense: 00 3a 00 00 [ 15.755814] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 15.755905] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > [ 15.835628] sd 0:0:0:0: Attached scsi disk sda [ 15.835840] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 15.838349] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 15.838427] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 15.838580] mice: PS/2 mouse device common for all mice [ 15.868749] TCP bic registered [ 15.868832] NET: Registered protocol family 1 [ 15.868909] NET: Registered protocol family 17 [ 15.869048] Starting balanced_irq [ 15.869128] Using IPI No-Shortcut mode [ 15.869597] ACPI: (supports S0 S3 S4 S5) [ 15.871470] Time: acpi_pm clocksource has been installed. [ 15.871579] Switched to NOHz mode on CPU #1 [ 15.871582] Switched to NOHz mode on CPU #0 [ 15.875069] input: AT Translated Set 2 keyboard as /class/input/input0 [ 16.009205] VFS: Mounted root (jfs filesystem) readonly. [ 16.009432] Freeing unused kernel memory: 212k freed [ 18.431301] usbcore: registered new interface driver usbfs [ 18.431709] usbcore: registered new interface driver hub [ 18.432028] usbcore: registered new device driver usb [ 18.487988] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 22 [ 18.488154] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 18.488158] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 18.488338] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 18.488460] ehci_hcd 0000:00:1d.7: debug port 1 [ 18.488542] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 18.488611] ehci_hcd 0000:00:1d.7: irq 22, io mem 0xde404000 [ 18.492564] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 18.492735] usb usb1: new device found, idVendor=0000, idProduct=0000 [ 18.492814] usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 [ 18.492893] usb usb1: Product: EHCI Host Controller [ 18.492993] usb usb1: Manufacturer: Linux 2.6.20-rc6-mm3-1 ehci_hcd [ 18.493076] usb usb1: SerialNumber: 0000:00:1d.7 [ 18.493225] usb usb1: configuration #1 chosen from 1 choice [ 18.493334] hub 1-0:1.0: USB hub found [ 18.493415] hub 1-0:1.0: 8 ports detected [ 18.550196] USB Universal Host Controller Interface driver v3.0 [ 18.598964] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 18.599140] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 18.599144] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 18.599246] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 18.599371] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001800 [ 18.599484] usb usb2: new device found, idVendor=0000, idProduct=0000 [ 18.599564] usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 [ 18.599644] usb usb2: Product: UHCI Host Controller [ 18.599723] usb usb2: Manufacturer: Linux 2.6.20-rc6-mm3-1 uhci_hcd [ 18.599812] usb usb2: SerialNumber: 0000:00:1d.0 [ 18.599934] usb usb2: configuration #1 chosen from 1 choice [ 18.600034] hub 2-0:1.0: USB hub found [ 18.600115] hub 2-0:1.0: 2 ports detected [ 18.645377] input: PC Speaker as /class/input/input1 [ 18.700816] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 18.700993] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 18.700997] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 18.701093] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 18.701207] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820 [ 18.701317] usb usb3: new device found, idVendor=0000, idProduct=0000 [ 18.701394] usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 [ 18.701473] usb usb3: Product: UHCI Host Controller [ 18.701549] usb usb3: Manufacturer: Linux 2.6.20-rc6-mm3-1 uhci_hcd [ 18.701627] usb usb3: SerialNumber: 0000:00:1d.1 [ 18.701746] usb usb3: configuration #1 chosen from 1 choice [ 18.701842] hub 3-0:1.0: USB hub found [ 18.701919] hub 3-0:1.0: 2 ports detected [ 18.817836] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 19 (level, low) -> IRQ 19 [ 18.818011] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 18.818015] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 18.818109] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 18.818224] uhci_hcd 0000:00:1d.2: irq 19, io base 0x00001840 [ 18.818334] usb usb4: new device found, idVendor=0000, idProduct=0000 [ 18.818413] usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1 [ 18.818491] usb usb4: Product: UHCI Host Controller [ 18.818567] usb usb4: Manufacturer: Linux 2.6.20-rc6-mm3-1 uhci_hcd [ 18.818644] usb usb4: SerialNumber: 0000:00:1d.2 [ 18.818764] usb usb4: configuration #1 chosen from 1 choice [ 18.818860] hub 4-0:1.0: USB hub found [ 18.818940] hub 4-0:1.0: 2 ports detected [ 18.920594] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 19 (level, low) -> IRQ 19 [ 18.920767] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 18.920771] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 18.920865] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 18.920979] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001860 [ 18.921087] usb usb5: new device found, idVendor=0000, idProduct=0000 [ 18.921165] usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1 [ 18.921243] usb usb5: Product: UHCI Host Controller [ 18.921319] usb usb5: Manufacturer: Linux 2.6.20-rc6-mm3-1 uhci_hcd [ 18.921396] usb usb5: SerialNumber: 0000:00:1d.3 [ 18.921516] usb usb5: configuration #1 chosen from 1 choice [ 18.921613] hub 5-0:1.0: USB hub found [ 18.921691] hub 5-0:1.0: 2 ports detected [ 18.924138] usb 1-4: new high speed USB device using ehci_hcd and address 2 [ 19.204569] input: PS/2 Mouse as /class/input/input2 [ 19.217616] input: AlpsPS/2 ALPS GlidePoint as /class/input/input3 [ 19.249892] tpm_inf_pnp 00:07: Found TPM with ID IFX0102 [ 19.250028] tpm_inf_pnp 00:07: TPM found: config base 0x2e, io base 0x1670, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2) [ 19.274013] Yenta: CardBus bridge found at 0000:09:04.0 [104d:81e6] [ 19.274116] Yenta: Using CSCINT to route CSC interrupts to PCI [ 19.274197] Yenta: Routing CardBus interrupts to PCI [ 19.274277] Yenta TI: socket 0000:09:04.0, mfunc 0x01a21b22, devctl 0x64 [ 19.281332] Linux agpgart interface v0.102 (c) Dave Jones [ 19.282803] agpgart: Detected an Intel 945GM Chipset. [ 19.300918] agpgart: AGP aperture is 256M @ 0x0 [ 19.301465] Real Time Clock Driver v1.12ac [ 19.355844] usb 1-4: new device found, idVendor=054c, idProduct=0281 [ 19.355933] usb 1-4: new device strings: Mfr=1, Product=2, SerialNumber=3 [ 19.356018] usb 1-4: Product: UMH-U09 [ 19.356097] usb 1-4: Manufacturer: Sony [ 19.356183] usb 1-4: SerialNumber: F000001C9B3A [ 19.356327] usb 1-4: configuration #1 chosen from 1 choice [ 19.386058] hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) [ 19.386641] Uniform CD-ROM driver Revision: 3.20 [ 19.512694] Yenta: ISA IRQ mask 0x0cf8, PCI irq 20 [ 19.512775] Socket status: 30000006 [ 19.512850] Yenta: Raising subordinate bus# of parent bus (#09) from #0a to #0d [ 19.512943] pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff [ 19.513021] cs: IO port probe 0x5000-0x5fff: clean. [ 19.513421] pcmcia: parent PCI bridge Memory window: 0xde000000 - 0xde0fffff [ 19.513500] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff [ 19.513868] ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 19.514039] PCI: Setting latency timer of device 0000:07:00.0 to 64 [ 19.514098] sky2 v1.10 addr 0xd8000000 irq 18 Yukon-FE (0xb7) rev 1 [ 19.514304] sky2 eth0: addr 00:13:a9:41:76:84 [ 19.514436] ACPI: PCI Interrupt 0000:09:04.2[C] -> GSI 22 (level, low) -> IRQ 21 [ 19.515055] ieee80211_crypt: registered algorithm 'NULL' [ 19.516839] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 19.516924] ieee80211: Copyright (C) 2004-2005 Intel Corporation <[email protected]> [ 19.733465] Initializing USB Mass Storage driver... [ 19.852213] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.0dmpr [ 19.852308] ipw3945: Copyright(c) 2003-2006 Intel Corporation [ 19.852541] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 19.852740] PCI: Setting latency timer of device 0000:06:00.0 to 64 [ 19.853087] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection [ 19.899161] usb 1-6: new high speed USB device using ehci_hcd and address 4 [ 19.958061] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 23 [ 19.962654] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 20.039091] usb 1-6: new device found, idVendor=05ca, idProduct=1830 [ 20.039179] usb 1-6: new device strings: Mfr=0, Product=0, SerialNumber=0 [ 20.039374] usb 1-6: configuration #1 chosen from 1 choice [ 20.078724] cs: IO port probe 0x100-0x3af: clean. [ 20.081112] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 20.082304] cs: IO port probe 0x820-0x8ff: clean. [ 20.083266] cs: IO port probe 0xc00-0xcf7: clean. [ 20.084346] cs: IO port probe 0xa00-0xaff: clean. [ 20.838620] usb 4-1: new full speed USB device using uhci_hcd and address 2 [ 21.017383] usb 4-1: new device found, idVendor=0483, idProduct=2016 [ 21.017468] usb 4-1: new device strings: Mfr=1, Product=2, SerialNumber=0 [ 21.017552] usb 4-1: Product: Biometric Coprocessor [ 21.017643] usb 4-1: Manufacturer: STMicroelectronics [ 21.017789] usb 4-1: configuration #1 chosen from 1 choice [ 21.386093] usb 5-1: new low speed USB device using uhci_hcd and address 2 [ 21.539760] usb 5-1: new device found, idVendor=054c, idProduct=01bb [ 21.539845] usb 5-1: new device strings: Mfr=0, Product=0, SerialNumber=0 [ 21.540032] usb 5-1: configuration #1 chosen from 1 choice [ 21.781715] usb 5-2: new full speed USB device using uhci_hcd and address 3 [ 21.982357] usb 5-2: new device found, idVendor=044e, idProduct=300c [ 21.982442] usb 5-2: new device strings: Mfr=1, Product=2, SerialNumber=0 [ 21.982526] usb 5-2: Product: UGX [ 21.982614] usb 5-2: Manufacturer: ALPS [ 21.982756] usb 5-2: configuration #1 chosen from 1 choice [ 22.036178] scsi2 : SCSI emulation for USB Mass Storage devices [ 22.036303] usb-storage: device found at 2 [ 22.036305] usb-storage: waiting for device to settle before scanning [ 22.036333] usbcore: registered new interface driver usb-storage [ 22.036413] USB Mass Storage support registered. [ 22.036651] Bluetooth: Core ver 2.11 [ 22.036955] NET: Registered protocol family 31 [ 22.037031] Bluetooth: HCI device and connection manager initialized [ 22.037109] Bluetooth: HCI socket layer initialized [ 22.062827] Bluetooth: HCI USB driver ver 2.9 [ 22.065919] usbcore: registered new interface driver hci_usb [ 22.536788] Adding 979924k swap on /dev/sda5. Priority:-1 extents:1 across:979924k [ 23.489142] loop: loaded (max 8 devices) [ 23.536167] ACPI Sony Notebook Control Driver v0.3 successfully installed [ 23.544458] sonypi: Sony Programmable I/O Controller Driver v1.26. [ 23.546117] sonypi: detected type3 model, verbose = 0, fnkeyinit = off, camera = off, compat = off, mask = 0xffffffff, useinput = on, acpi = on [ 23.546216] sonypi: enabled at irq=11, port1=0x1080, port2=0x1084 [ 23.546293] sonypi: device allocated minor is 63 [ 23.553993] input: Sony Vaio Jogdial as /class/input/input4 [ 23.555686] input: Sony Vaio Keys as /class/input/input5 [ 23.662494] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [email protected] [ 26.591843] ipw3945: Detected geography ABG (13 802.11bg channels, 12 802.11a channels) [ 27.037900] scsi 2:0:0:0: Direct-Access Sony USB HS-CARD 4.52 PQ: 0 ANSI: 0 [ 27.087513] sd 2:0:0:0: Attached scsi removable disk sdb [ 27.088639] usb-storage: device scan complete [ 29.304111] sky2 eth0: enabling interface [ 29.306381] sky2 eth0: ram buffer 4K [ 32.401687] ip_tables: (C) 2000-2006 Netfilter Core Team [ 34.259849] NET: Registered protocol family 10 [ 34.260039] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 44.611655] eth2: no IPv6 routers present [ 56.974458] Netfilter messages via NETLINK v0.30. [ 56.982635] nf_conntrack version 0.5.0 (8179 buckets, 65432 max) [ 80.371352] SysRq : Show Pending Timers [ 80.371510] Timer List Version: v0.3 [ 80.371590] HRTIMER_MAX_CLOCK_BASES: 2 [ 80.371678] now at 67306412690 nsecs [ 80.371751] [ 80.371752] cpu: 0 [ 80.371894] clock 0: [ 80.371966] .index: 0 [ 80.372039] .resolution: 4000250 nsecs [ 80.372112] .get_time: ktime_get_real [ 80.372307] active timers: [ 80.372380] clock 1: [ 80.372452] .index: 1 [ 80.372525] .resolution: 4000250 nsecs [ 80.372599] .get_time: ktime_get [ 80.372790] active timers: [ 80.372863] .nohz_mode : 1 [ 80.372937] .idle_tick : 67292033750 nsecs [ 80.373012] .tick_stopped : 1 [ 80.373085] .idle_jiffies : 4294909118 [ 80.373160] .idle_calls : 35728 [ 80.373234] .idle_sleeps : 5871 [ 80.373308] .idle_entrytime : 67290929947 nsecs [ 80.373384] .idle_sleeptime : 60614021915 nsecs [ 80.373460] .last_jiffies : 4294909118 [ 80.373535] .next_jiffies : 4294909155 [ 80.373609] .idle_expires : 67436000000 nsecs [ 80.373684] jiffies: 4294909122 [ 80.373758] [ 80.373758] cpu: 1 [ 80.373900] clock 0: [ 80.373972] .index: 0 [ 80.374045] .resolution: 4000250 nsecs [ 80.374119] .get_time: ktime_get_real [ 80.374310] active timers: [ 80.374383] clock 1: [ 80.374455] .index: 1 [ 80.374528] .resolution: 4000250 nsecs [ 80.374602] .get_time: ktime_get [ 80.374793] active timers: [ 80.374865] .nohz_mode : 1 [ 80.374939] .idle_tick : 65807941000 nsecs [ 80.375014] .tick_stopped : 1 [ 80.375088] .idle_jiffies : 4294908747 [ 80.375162] .idle_calls : 1350 [ 80.375236] .idle_sleeps : 708 [ 80.375310] .idle_entrytime : 65804072320 nsecs [ 80.375386] .idle_sleeptime : 62278322765 nsecs [ 80.375462] .last_jiffies : 4294908747 [ 80.375537] .next_jiffies : 4294909247 [ 80.375611] .idle_expires : 67804000000 nsecs [ 80.375687] jiffies: 4294909122 [ 80.375760] [ 80.375831] [ 80.375831] Tick Device: mode: 1 [ 80.375975] Clock Event Device: pit [ 80.376107] max_delta_ns: 27461866 [ 80.376181] min_delta_ns: 4000250 [ 80.376255] mult: 5124677 [ 80.376329] shift: 32 [ 80.376402] mode: 3 [ 80.376475] next_event: 67436000000 nsecs [ 80.376550] set_next_event: pit_next_event [ 80.376744] set_mode: init_pit_timer [ 80.376936] event_handler: tick_handle_oneshot_broadcast [ 80.377131] tick_broadcast_mask: 00000003 [ 80.377205] tick_broadcast_oneshot_mask: 00000003 [ 80.377281] [ 80.377352] [ 80.377352] Tick Device: mode: 1 [ 80.377496] Clock Event Device: lapic [ 80.377629] max_delta_ns: 805300686 [ 80.377703] min_delta_ns: 4000250 [ 80.377777] mult: 44739553 [ 80.377851] shift: 32 [ 80.377923] mode: 1 [ 80.377997] next_event: 67436000000 nsecs [ 80.378071] set_next_event: lapic_next_event [ 80.378264] set_mode: lapic_timer_setup [ 80.378456] event_handler: tick_nohz_handler [ 80.378649] [ 80.378649] Tick Device: mode: 1 [ 80.378793] Clock Event Device: lapic [ 80.378926] max_delta_ns: 805300686 [ 80.379000] min_delta_ns: 4000250 [ 80.379073] mult: 44739553 [ 80.379147] shift: 32 [ 80.379221] mode: 1 [ 80.379294] next_event: 67804000000 nsecs [ 80.379369] set_next_event: lapic_next_event [ 80.379561] set_mode: lapic_timer_setup [ 80.379753] event_handler: tick_nohz_handler [ 80.379945] [ 151.172554] SysRq : Show Pending Timers [ 151.172712] Timer List Version: v0.3 [ 151.172792] HRTIMER_MAX_CLOCK_BASES: 2 [ 151.172880] now at 138165223812 nsecs [ 151.172954] [ 151.172954] cpu: 0 [ 151.173097] clock 0: [ 151.173168] .index: 0 [ 151.173241] .resolution: 4000250 nsecs [ 151.173316] .get_time: ktime_get_real [ 151.173510] active timers: [ 151.173583] clock 1: [ 151.173655] .index: 1 [ 151.173728] .resolution: 4000250 nsecs [ 151.173802] .get_time: ktime_get [ 151.173993] active timers: [ 151.174066] .nohz_mode : 1 [ 151.174140] .idle_tick : 138160462750 nsecs [ 151.174216] .tick_stopped : 1 [ 151.174289] .idle_jiffies : 4294926835 [ 151.174364] .idle_calls : 58322 [ 151.174438] .idle_sleeps : 9738 [ 151.174512] .idle_entrytime : 138159968209 nsecs [ 151.174587] .idle_sleeptime : 131052545358 nsecs [ 151.174663] .last_jiffies : 4294926835 [ 151.174737] .next_jiffies : 4294926856 [ 151.174812] .idle_expires : 138240000000 nsecs [ 151.174887] jiffies: 4294926837 [ 151.174960] [ 151.174961] cpu: 1 [ 151.175102] clock 0: [ 151.175174] .index: 0 [ 151.175247] .resolution: 4000250 nsecs [ 151.175321] .get_time: ktime_get_real [ 151.175513] active timers: [ 151.175586] clock 1: [ 151.175658] .index: 1 [ 151.175731] .resolution: 4000250 nsecs [ 151.175805] .get_time: ktime_get [ 151.175996] active timers: [ 151.176069] .nohz_mode : 1 [ 151.176143] .idle_tick : 137804440500 nsecs [ 151.176218] .tick_stopped : 1 [ 151.176291] .idle_jiffies : 4294926747 [ 151.176366] .idle_calls : 1437 [ 151.176440] .idle_sleeps : 795 [ 151.176514] .idle_entrytime : 137804068861 nsecs [ 151.176589] .idle_sleeptime : 134255004466 nsecs [ 151.176665] .last_jiffies : 4294926747 [ 151.176740] .next_jiffies : 4294927247 [ 151.180981] .idle_expires : 139804000000 nsecs [ 151.181057] jiffies: 4294926837 [ 151.181130] [ 151.181201] [ 151.181202] Tick Device: mode: 1 [ 151.181346] Clock Event Device: pit [ 151.181478] max_delta_ns: 27461866 [ 151.181553] min_delta_ns: 4000250 [ 151.181626] mult: 5124677 [ 151.181700] shift: 32 [ 151.181773] mode: 3 [ 151.181847] next_event: 138240000000 nsecs [ 151.181921] set_next_event: pit_next_event [ 151.182114] set_mode: init_pit_timer [ 151.182307] event_handler: tick_handle_oneshot_broadcast [ 151.182501] tick_broadcast_mask: 00000003 [ 151.182576] tick_broadcast_oneshot_mask: 00000003 [ 151.182650] [ 151.182722] [ 151.182722] Tick Device: mode: 1 [ 151.182866] Clock Event Device: lapic [ 151.182998] max_delta_ns: 805300686 [ 151.183073] min_delta_ns: 4000250 [ 151.183147] mult: 44739553 [ 151.183220] shift: 32 [ 151.183293] mode: 1 [ 151.183366] next_event: 138240000000 nsecs [ 151.183441] set_next_event: lapic_next_event [ 151.183634] set_mode: lapic_timer_setup [ 151.183826] event_handler: tick_nohz_handler [ 151.184019] [ 151.184020] Tick Device: mode: 1 [ 151.184163] Clock Event Device: lapic [ 151.184296] max_delta_ns: 805300686 [ 151.184370] min_delta_ns: 4000250 [ 151.184444] mult: 44739553 [ 151.184518] shift: 32 [ 151.184591] mode: 1 [ 151.184664] next_event: 139804000000 nsecs [ 151.184739] set_next_event: lapic_next_event [ 151.184931] set_mode: lapic_timer_setup [ 151.185124] event_handler: tick_nohz_handler [ 151.185316] [ 164.620705] ACPI: Battery Slot [BAT1] (battery present) [ 164.629377] ACPI: AC Adapter [ACAD] (on-line) [ 164.646695] input: Lid Switch as /class/input/input6 [ 164.654108] ACPI: Lid Switch [LID0] [ 164.662080] input: Power Button (CM) as /class/input/input7 [ 164.669246] ACPI: Power Button (CM) [PWRB] [ 164.689315] ACPI: Thermal Zone [ATF0] (49 C) [ 164.690545] ACPI: Thermal Zone [DTS0] (50 C) [ 164.691759] ACPI: Thermal Zone [DTS1] (50 C) [ 169.432094] Installing knfsd (copyright (C) 1996 [email protected]). [ 169.523871] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 169.524000] NFSD: starting 90-second grace period [ 190.879065] BUG: soft lockup detected on CPU#1! [ 190.879175] [<c0104dac>] show_trace_log_lvl+0x1a/0x2f [ 190.879339] [<c010540b>] show_trace+0x12/0x14 [ 190.879510] [<c010548f>] dump_stack+0x16/0x18 [ 190.879676] [<c0146e38>] softlockup_tick+0xa7/0xb6 [ 190.879849] [<c01286c0>] run_local_timers+0x12/0x14 [ 190.880022] [<c0128a61>] update_process_times+0x3e/0x63 [ 190.880193] [<c01374ad>] tick_nohz_handler+0x7d/0xe3 [ 190.880367] [<c01137c2>] smp_apic_timer_interrupt+0x71/0x83 [ 190.880539] [<c01048f4>] apic_timer_interrupt+0x28/0x30 [ 190.880710] [<c0102435>] cpu_idle+0xad/0xd3 [ 190.880879] [<c0112975>] start_secondary+0x32b/0x333 [ 190.881052] [<00000000>] run_init_process+0x3fefed10/0x19 [ 190.881224] ======================= [ 193.605480] Bluetooth: L2CAP ver 2.8 [ 193.605565] Bluetooth: L2CAP socket layer initialized [ 195.360060] Bluetooth: RFCOMM socket layer initialized [ 195.360146] Bluetooth: RFCOMM TTY layer initialized [ 195.360221] Bluetooth: RFCOMM ver 1.8
Signature · 2 lines
mattia :wq!
Quoted 5 lines · Thomas Gleixner
Quoted 1 line · Mattia Dongili
yes, slowness is gone. Any useful information I can provide?
Can you please try with
CONFIG_ACPI_PROCESSOR=yinstead of =m ? This should make the slowness go away too.
not much luck. Actually the general slowness is gone but at netfilter registration the the boot almost stops.
I'll provide the info you requested shortly.
Signature · 2 lines
mattia :wq!
Quoted 2 lines · Andrew Morton
- Restored git-block.patch: mainly the block unplugging rework. The problematic CFQ updates have been taken out.
MD hung again as before so I compiled a kernel without it. Next XFS started hanging during bootup.
Some traces of processes hung but I do not have a clue as to what is wrong here...:
Call Trace:
[<a00000010074c1b0>] schedule+0x1bf0/0x1ec0
sp=e00000301560fac0 bsp=e000003015608fc8
[<a0000001003ba350>] xfs_buf_iorequest+0x130/0x820
sp=e00000301560fbd0 bsp=e000003015608f58
[<a0000001003c5b00>] xfs_bdstrat_cb+0x60/0x100
sp=e00000301560fc00 bsp=e000003015608f38
[<a0000001003b2ba0>] xfs_bwrite+0xe0/0x1e0
sp=e00000301560fc00 bsp=e000003015608f00
[<a0000001003a3980>] xfs_syncsub+0x2c0/0x520
sp=e00000301560fc00 bsp=e000003015608eb0
[<a0000001003a3d30>] xfs_sync+0x70/0xa0
sp=e00000301560fc00 bsp=e000003015608e88
[<a0000001003cb400>] vfs_sync+0xa0/0xc0
sp=e00000301560fc00 bsp=e000003015608e58
[<a0000001003c8910>] xfs_fs_write_super+0x70/0xa0
sp=e00000301560fc00 bsp=e000003015608e38
[<a00000010016d490>] sync_supers+0x150/0x260
sp=e00000301560fc00 bsp=e000003015608e08
[<a000000100115820>] wb_kupdate+0x60/0x280
sp=e00000301560fc00 bsp=e000003015608dc8
[<a000000100116570>] pdflush+0x330/0x4e0
sp=e00000301560fc50 bsp=e000003015608d90
[<a0000001000d2ac0>] kthread+0x220/0x2a0
sp=e00000301560fd50 bsp=e000003015608d48
[<a000000100010a50>] kernel_thread_helper+0xd0/0x100
sp=e00000301560fe30 bsp=e000003015608d20
[<a000000100009140>] start_kernel_thread+0x20/0x40
sp=e00000301560fe30 bsp=e000003015608d20
Call Trace:
[<a00000010074c1b0>] schedule+0x1bf0/0x1ec0
sp=e00001b03869f8b0 bsp=e00001b038699618
[<a00000010074db00>] schedule_timeout+0x40/0x180
sp=e00001b03869f9c0 bsp=e00001b0386995e0
[<a000000100385420>] _xfs_log_force+0x500/0x5c0
sp=e00001b03869f9f0 bsp=e00001b038699580
[<a00000010030ccf0>] xfs_alloc_search_busy+0x190/0x1e0
sp=e00001b03869fa20 bsp=e00001b038699538
[<a000000100311010>] xfs_alloc_ag_vextent+0x2250/0x2420
sp=e00001b03869fa20 bsp=e00001b0386994a8
[<a000000100312490>] xfs_alloc_vextent+0x690/0x9c0
sp=e00001b03869fa60 bsp=e00001b038699428
[<a000000100332540>] xfs_bmapi+0x1e00/0x33a0
sp=e00001b03869fa60 bsp=e00001b0386992d8
[<a00000010037e750>] xfs_iomap_write_allocate+0x3f0/0x760
sp=e00001b03869fba0 bsp=e00001b038699248
[<a00000010037d650>] xfs_iomap+0x670/0xb00
sp=e00001b03869fc30 bsp=e00001b0386991d0
[<a0000001003c5a80>] xfs_bmap+0x40/0x60
sp=e00001b03869fc80 bsp=e00001b038699188
[<a0000001003b5b40>] xfs_map_blocks+0xa0/0x120
sp=e00001b03869fc80 bsp=e00001b038699148
[<a0000001003b6260>] xfs_page_state_convert+0x540/0x1a40
sp=e00001b03869fc90 bsp=e00001b038699080
[<a0000001003b7e20>] xfs_vm_writepage+0x180/0x220
sp=e00001b03869fd50 bsp=e00001b038699040
[<a0000001001146e0>] generic_writepages+0x420/0x800
sp=e00001b03869fd60 bsp=e00001b038698fc0
[<a0000001003b7f50>] xfs_vm_writepages+0x90/0xc0
sp=e00001b03869fdf0 bsp=e00001b038698f88
[<a000000100114b70>] do_writepages+0xb0/0x120
sp=e00001b03869fdf0 bsp=e00001b038698f58
[<a000000100108470>] __filemap_fdatawrite_range+0xb0/0xe0
sp=e00001b03869fdf0 bsp=e00001b038698f20
[<a0000001001089c0>] filemap_fdatawrite+0x40/0x60
sp=e00001b03869fe30 bsp=e00001b038698f00
[<a0000001003befe0>] fs_flush_pages+0xc0/0x100
sp=e00001b03869fe30 bsp=e00001b038698eb8
[<a0000001003adaf0>] xfs_close+0x190/0x1e0
sp=e00001b03869fe30 bsp=e00001b038698e80
[<a0000001003be4e0>] xfs_file_close+0xa0/0xc0
sp=e00001b03869fe30 bsp=e00001b038698e60
[<a0000001001643b0>] filp_close+0xd0/0x140
sp=e00001b03869fe30 bsp=e00001b038698e30
[<a000000100164560>] sys_close+0x140/0x1e0
sp=e00001b03869fe30 bsp=e00001b038698db0
[<a00000010000b360>] ia64_ret_from_syscall+0x0/0x20
sp=e00001b03869fe30 bsp=e00001b038698db0
[<a000000000010620>] __kernel_syscall_via_break+0x0/0x20
sp=e00001b0386a0000 bsp=e00001b038698db0Quoted 7 lines · On Wed, 31 Jan 2007 16:14:10 -0800 (PST) Christoph Lameter <[email protected]>…
Quoted 2 lines · Andrew Morton
- Restored git-block.patch: mainly the block unplugging rework. The problematic CFQ updates have been taken out.
MD hung again as before so I compiled a kernel without it. Next XFS started hanging during bootup.
ow. Please don't make me drop git-block-and-lots-of-other-things again. Was 2.6.20-rc6-mm2 OK? It didn't have git-block.
Quoted 2 lines
Some traces of processes hung but I do not have a clue as to what is wrong here...:
Probably an IO got lost.
Quoted 81 lines
Call Trace:
[<a00000010074c1b0>] schedule+0x1bf0/0x1ec0
sp=e00000301560fac0 bsp=e000003015608fc8
[<a0000001003ba350>] xfs_buf_iorequest+0x130/0x820
sp=e00000301560fbd0 bsp=e000003015608f58
[<a0000001003c5b00>] xfs_bdstrat_cb+0x60/0x100
sp=e00000301560fc00 bsp=e000003015608f38
[<a0000001003b2ba0>] xfs_bwrite+0xe0/0x1e0
sp=e00000301560fc00 bsp=e000003015608f00
[<a0000001003a3980>] xfs_syncsub+0x2c0/0x520
sp=e00000301560fc00 bsp=e000003015608eb0
[<a0000001003a3d30>] xfs_sync+0x70/0xa0
sp=e00000301560fc00 bsp=e000003015608e88
[<a0000001003cb400>] vfs_sync+0xa0/0xc0
sp=e00000301560fc00 bsp=e000003015608e58
[<a0000001003c8910>] xfs_fs_write_super+0x70/0xa0
sp=e00000301560fc00 bsp=e000003015608e38
[<a00000010016d490>] sync_supers+0x150/0x260
sp=e00000301560fc00 bsp=e000003015608e08
[<a000000100115820>] wb_kupdate+0x60/0x280
sp=e00000301560fc00 bsp=e000003015608dc8
[<a000000100116570>] pdflush+0x330/0x4e0
sp=e00000301560fc50 bsp=e000003015608d90
[<a0000001000d2ac0>] kthread+0x220/0x2a0
sp=e00000301560fd50 bsp=e000003015608d48
[<a000000100010a50>] kernel_thread_helper+0xd0/0x100
sp=e00000301560fe30 bsp=e000003015608d20
[<a000000100009140>] start_kernel_thread+0x20/0x40
sp=e00000301560fe30 bsp=e000003015608d20
Call Trace:
[<a00000010074c1b0>] schedule+0x1bf0/0x1ec0
sp=e00001b03869f8b0 bsp=e00001b038699618
[<a00000010074db00>] schedule_timeout+0x40/0x180
sp=e00001b03869f9c0 bsp=e00001b0386995e0
[<a000000100385420>] _xfs_log_force+0x500/0x5c0
sp=e00001b03869f9f0 bsp=e00001b038699580
[<a00000010030ccf0>] xfs_alloc_search_busy+0x190/0x1e0
sp=e00001b03869fa20 bsp=e00001b038699538
[<a000000100311010>] xfs_alloc_ag_vextent+0x2250/0x2420
sp=e00001b03869fa20 bsp=e00001b0386994a8
[<a000000100312490>] xfs_alloc_vextent+0x690/0x9c0
sp=e00001b03869fa60 bsp=e00001b038699428
[<a000000100332540>] xfs_bmapi+0x1e00/0x33a0
sp=e00001b03869fa60 bsp=e00001b0386992d8
[<a00000010037e750>] xfs_iomap_write_allocate+0x3f0/0x760
sp=e00001b03869fba0 bsp=e00001b038699248
[<a00000010037d650>] xfs_iomap+0x670/0xb00
sp=e00001b03869fc30 bsp=e00001b0386991d0
[<a0000001003c5a80>] xfs_bmap+0x40/0x60
sp=e00001b03869fc80 bsp=e00001b038699188
[<a0000001003b5b40>] xfs_map_blocks+0xa0/0x120
sp=e00001b03869fc80 bsp=e00001b038699148
[<a0000001003b6260>] xfs_page_state_convert+0x540/0x1a40
sp=e00001b03869fc90 bsp=e00001b038699080
[<a0000001003b7e20>] xfs_vm_writepage+0x180/0x220
sp=e00001b03869fd50 bsp=e00001b038699040
[<a0000001001146e0>] generic_writepages+0x420/0x800
sp=e00001b03869fd60 bsp=e00001b038698fc0
[<a0000001003b7f50>] xfs_vm_writepages+0x90/0xc0
sp=e00001b03869fdf0 bsp=e00001b038698f88
[<a000000100114b70>] do_writepages+0xb0/0x120
sp=e00001b03869fdf0 bsp=e00001b038698f58
[<a000000100108470>] __filemap_fdatawrite_range+0xb0/0xe0
sp=e00001b03869fdf0 bsp=e00001b038698f20
[<a0000001001089c0>] filemap_fdatawrite+0x40/0x60
sp=e00001b03869fe30 bsp=e00001b038698f00
[<a0000001003befe0>] fs_flush_pages+0xc0/0x100
sp=e00001b03869fe30 bsp=e00001b038698eb8
[<a0000001003adaf0>] xfs_close+0x190/0x1e0
sp=e00001b03869fe30 bsp=e00001b038698e80
[<a0000001003be4e0>] xfs_file_close+0xa0/0xc0
sp=e00001b03869fe30 bsp=e00001b038698e60
[<a0000001001643b0>] filp_close+0xd0/0x140
sp=e00001b03869fe30 bsp=e00001b038698e30
[<a000000100164560>] sys_close+0x140/0x1e0
sp=e00001b03869fe30 bsp=e00001b038698db0
[<a00000010000b360>] ia64_ret_from_syscall+0x0/0x20
sp=e00001b03869fe30 bsp=e00001b038698db0
[<a000000000010620>] __kernel_syscall_via_break+0x0/0x20
sp=e00001b0386a0000 bsp=e00001b038698db0Quoted 2 lines · Andrew Morton
ow. Please don't make me drop git-block-and-lots-of-other-things again. Was 2.6.20-rc6-mm2 OK? It didn't have git-block.
Yes, 2.6.20-rc6-mm2 was okay. Sorry.
Quoted 6 lines · On Wed, 31 Jan 2007 16:27:16 -0800 (PST) Christoph Lameter <[email protected]>…
Quoted 2 lines · Andrew Morton
ow. Please don't make me drop git-block-and-lots-of-other-things again. Was 2.6.20-rc6-mm2 OK? It didn't have git-block.
Yes, 2.6.20-rc6-mm2 was okay. Sorry.
OK, thanks.
Actually, we might not have lost an IO: it could be that we're simply missing an unplug. Are you able to unblock things by forcing some other IO against that queue? Say, do a read from /dev/sda?
Quoted 3 lines · Andrew Morton
Actually, we might not have lost an IO: it could be that we're simply missing an unplug. Are you able to unblock things by forcing some other IO against that queue? Say, do a read from
/dev/sda?
The system does not come up to a prompt. The traces were taken via NMI during bootup (shortly after udev came up).
Quoted 8 lines · Andrew Morton
Quoted 5 lines · On Wed, 31 Jan 2007 16:27:16 -0800 (PST) Christoph Lameter <[email protected]>…
Quoted 2 lines · Andrew Morton
ow. Please don't make me drop git-block-and-lots-of-other-things again. Was 2.6.20-rc6-mm2 OK? It didn't have git-block.
Quoted 6 lines
Quoted 1 line
Yes, 2.6.20-rc6-mm2 was okay. Sorry.
OK, thanks.
Actually, we might not have lost an IO: it could be that we're simply missing an unplug.
Could be - I can't be certain but I think we've got one thread waiting for a buffer to be unpinned before it is written, and the other thread waiting for log I/O to complete. The first thread won't unplug the device, and the log I/o is async so it won't either.
What are the new unplugging rules introduced by the git-block patch? How do they differ from the existing rules?
Cheers,
Dave.
Signature · 3 lines
Dave Chinner Principal Engineer SGI Australian Software Group
Quoted 2 lines · On Thu, 1 Feb 2007 17:20:18 +1100 David Chinner <[email protected]> wrote:
What are the new unplugging rules introduced by the git-block patch?
Pretty simple: you read the largely-useless changelog then call the bravely uncommented blk_plug_current() when you're about to submit some IO and you call the audaciously uncommented blk_unplug_current() when you've finished and you're ready to let it rip.
But usually none of that is necessary, because io_schedule() does all the work for you.
err, this might help.
fs/xfs/linux-2.6/xfs_buf.c renamed from fs/xfs/linux-2.6/xfs_buf.c~git-block-xfs-fix +1 -1
@@ -979,7 +979,7 @@ xfs_buf_wait_unpin(set_current_state (TASK_UNINTERRUPTIBLE );if (atomic_read (&bp->b_pin_count) ==0 )break ; -schedule (); +io_schedule (); }remove_wait_queue (&bp->b_waiters, &wait);set_current_state (TASK_RUNNING );
_
Quoted 4 lines · Andrew Morton
But usually none of that is necessary, because
io_schedule()does all the work for you.err, this might help.
Well okay boot progresses further (maybe only on this boot) but system is still hung.
Traces (this was a backtrace of all processes on the system. I removed the irrelevant ones):
Delaying for 5 seconds...
All OS INIT slaves have reached rendezvous
Processes interrupted by INIT - 0 (cpu 0 task 0xa000000100b24000) 0 (cpu 1 task 0xe00000b003bd8000) 0 (cpu 2 task 0xe000023c38248000) 0 (cpu 3 task 0xe00000b003d00000) 0 (cpu 4 task 0xe000023c38258000) 0 (cpu 5 task 0xe00000b003d10000) 0 (cpu 6 task 0xe000023c38268000) 0 (cpu 7 task 0xe00000b003d20000) 0 (cpu 8 task 0xe000023c382e8000) 0 (cpu 9 task 0xe00000b003d30000) 0 (cpu 10 task 0xe000023c38380000) 0 (cpu 11 task 0xe00000b003d40000)
Backtrace of pid 1 (init)
Call Trace:
[<a000000100799bb0>] schedule+0x1bf0/0x1ec0
sp=e00000307bd178c0 bsp=e00000307bd11828
[<a000000100797b20>] __down+0x240/0x280
sp=e00000307bd179d0 bsp=e00000307bd117e8
[<a0000001003b8f10>] xfs_buf_iowait+0x50/0x80
sp=e00000307bd17a00 bsp=e00000307bd117c8
[<a0000001003bb120>] xfs_buf_iostart+0x1a0/0x1c0
sp=e00000307bd17a00 bsp=e00000307bd117a0
[<a0000001003bc140>] xfs_buf_read_flags+0xe0/0x160
sp=e00000307bd17a00 bsp=e00000307bd11768
[<a00000010039e490>] xfs_trans_read_buf+0x50/0x6a0
sp=e00000307bd17a00 bsp=e00000307bd11710
[<a0000001003420a0>] xfs_btree_read_bufl+0xe0/0x120
sp=e00000307bd17a00 bsp=e00000307bd116d0
[<a000000100334de0>] xfs_bmap_read_extents+0x2c0/0x7e0
sp=e00000307bd17a10 bsp=e00000307bd11658
[<a000000100376820>] xfs_iread_extents+0x160/0x1c0
sp=e00000307bd17a20 bsp=e00000307bd11618
[<a000000100330b90>] xfs_bmapi+0x430/0x33a0
sp=e00000307bd17a20 bsp=e00000307bd114c8
[<a00000010037d3e0>] xfs_iomap+0x3e0/0xb00
sp=e00000307bd17b60 bsp=e00000307bd11458
[<a0000001003c5aa0>] xfs_bmap+0x40/0x60
sp=e00000307bd17bb0 bsp=e00000307bd11410
[<a0000001003b4c30>] __xfs_get_blocks+0xd0/0x5c0
sp=e00000307bd17bb0 bsp=e00000307bd113a0
[<a0000001003b51c0>] xfs_get_blocks+0x40/0x60
sp=e00000307bd17bf0 bsp=e00000307bd11368
[<a0000001001b8d00>] __block_prepare_write+0x3e0/0xd20
sp=e00000307bd17bf0 bsp=e00000307bd112c8
[<a0000001001ba740>] block_prepare_write+0x40/0xa0
sp=e00000307bd17c10 bsp=e00000307bd11290
[<a0000001003b7af0>] xfs_vm_prepare_write+0x30/0x60
sp=e00000307bd17c10 bsp=e00000307bd11258
[<a000000100109290>] generic_file_buffered_write+0x3d0/0xda0
sp=e00000307bd17c10 bsp=e00000307bd11170
[<a0000001003c8100>] xfs_write+0xc60/0x1260
sp=e00000307bd17ca0 bsp=e00000307bd11088
[<a0000001003bed00>] xfs_file_aio_write+0x120/0x140
sp=e00000307bd17d10 bsp=e00000307bd11050
[<a000000100167ca0>] do_sync_write+0x180/0x200
sp=e00000307bd17d10 bsp=e00000307bd11018
[<a000000100169130>] vfs_write+0x1b0/0x340
sp=e00000307bd17e20 bsp=e00000307bd10fc0
[<a000000100169db0>] sys_write+0x70/0xe0
sp=e00000307bd17e20 bsp=e00000307bd10f48
[<a00000010000b360>] ia64_ret_from_syscall+0x0/0x20
sp=e00000307bd17e30 bsp=e00000307bd10f48
[<a000000000010620>] __kernel_syscall_via_break+0x0/0x20
sp=e00000307bd18000 bsp=e00000307bd10f48Backtrace of pid 1006 (xfsbufd)
Call Trace:
[<a000000100799bb0>] schedule+0x1bf0/0x1ec0
sp=e00000301527fc00 bsp=e000003015278e38
[<a00000010079b5d0>] schedule_timeout+0x110/0x180
sp=e00000301527fd10 bsp=e000003015278e08
[<a00000010079b6d0>] schedule_timeout_interruptible+0x30/0x60
sp=e00000301527fd40 bsp=e000003015278de0
[<a0000001003bcf70>] xfsbufd+0x1b0/0x520
sp=e00000301527fd40 bsp=e000003015278d90
[<a0000001000d2ac0>] kthread+0x220/0x2a0
sp=e00000301527fd50 bsp=e000003015278d48
[<a000000100010a50>] kernel_thread_helper+0xd0/0x100
sp=e00000301527fe30 bsp=e000003015278d20
[<a000000100009140>] start_kernel_thread+0x20/0x40
sp=e00000301527fe30 bsp=e000003015278d20Backtrace of pid 1007 (xfssyncd)
Call Trace:
[<a000000100799bb0>] schedule+0x1bf0/0x1ec0
sp=e00000307bdc7c00 bsp=e00000307bdc0e20
[<a00000010079b5d0>] schedule_timeout+0x110/0x180
sp=e00000307bdc7d10 bsp=e00000307bdc0de8
[<a00000010079b6d0>] schedule_timeout_interruptible+0x30/0x60
sp=e00000307bdc7d40 bsp=e00000307bdc0dc8
[<a0000001003c9910>] xfssyncd+0xb0/0x400
sp=e00000307bdc7d40 bsp=e00000307bdc0d90
[<a0000001000d2ac0>] kthread+0x220/0x2a0
sp=e00000307bdc7d50 bsp=e00000307bdc0d48
[<a000000100010a50>] kernel_thread_helper+0xd0/0x100
sp=e00000307bdc7e30 bsp=e00000307bdc0d20
[<a000000100009140>] start_kernel_thread+0x20/0x40
sp=e00000307bdc7e30 bsp=e00000307bdc0d20Backtrace of pid 1063 (udevd)
Call Trace:
[<a000000100799bb0>] schedule+0x1bf0/0x1ec0
sp=e000003015e1f950 bsp=e000003015e18f78
[<a00000010079b500>] schedule_timeout+0x40/0x180
sp=e000003015e1fa60 bsp=e000003015e18f48
[<a000000100186f60>] do_select+0x360/0x840
sp=e000003015e1fa90 bsp=e000003015e18e68
[<a000000100187a50>] sys_select+0x610/0x9e0
sp=e000003015e1fce0 bsp=e000003015e18dc8
[<a00000010000b360>] ia64_ret_from_syscall+0x0/0x20
sp=e000003015e1fe30 bsp=e000003015e18dc8
[<a000000000010620>] __kernel_syscall_via_break+0x0/0x20
sp=e000003015e20000 bsp=e000003015e18dc8Backtrace of pid 2372 (ifup)
Call Trace:
[<a000000100799bb0>] schedule+0x1bf0/0x1ec0
sp=e00000307a47fd00 bsp=e00000307a478e58
[<a0000001000aada0>] do_exit+0x1320/0x1380
sp=e00000307a47fe10 bsp=e00000307a478e08
[<a0000001000aaf40>] do_group_exit+0x140/0x160
sp=e00000307a47fe30 bsp=e00000307a478dc8
[<a0000001000aaf80>] sys_exit_group+0x20/0x40
sp=e00000307a47fe30 bsp=e00000307a478d70
[<a00000010000b360>] ia64_ret_from_syscall+0x0/0x20
sp=e00000307a47fe30 bsp=e00000307a478d70
[<a000000000010620>] __kernel_syscall_via_break+0x0/0x20
sp=e00000307a480000 bsp=e00000307a478d70Backtrace of pid 2421 (startpar)
Call Trace:
[<a000000100799bb0>] schedule+0x1bf0/0x1ec0
sp=e00000307a507d00 bsp=e00000307a500e28
[<a0000001000aada0>] do_exit+0x1320/0x1380
sp=e00000307a507e10 bsp=e00000307a500dd0
[<a0000001000aaf40>] do_group_exit+0x140/0x160
sp=e00000307a507e30 bsp=e00000307a500d98
[<a0000001000aaf80>] sys_exit_group+0x20/0x40
sp=e00000307a507e30 bsp=e00000307a500d40
[<a00000010000b360>] ia64_ret_from_syscall+0x0/0x20
sp=e00000307a507e30 bsp=e00000307a500d40
[<a000000000010620>] __kernel_syscall_via_break+0x0/0x20
sp=e00000307a508000 bsp=e00000307a500d40Backtrace of pid 2450 (boot.ldconfig)
Call Trace:
[<a000000100799bb0>] schedule+0x1bf0/0x1ec0
sp=e00000307a55fd00 bsp=e00000307a558e58
[<a0000001000aada0>] do_exit+0x1320/0x1380
sp=e00000307a55fe10 bsp=e00000307a558e08
[<a0000001000aaf40>] do_group_exit+0x140/0x160
sp=e00000307a55fe30 bsp=e00000307a558dc8
[<a0000001000aaf80>] sys_exit_group+0x20/0x40
sp=e00000307a55fe30 bsp=e00000307a558d70
[<a00000010000b360>] ia64_ret_from_syscall+0x0/0x20
sp=e00000307a55fe30 bsp=e00000307a558d70
[<a000000000010620>] __kernel_syscall_via_break+0x0/0x20
sp=e00000307a560000 bsp=e00000307a558d70Backtrace of pid 2452 (startpar)
Call Trace:
[<a000000100799bb0>] schedule+0x1bf0/0x1ec0
sp=e00000307a5ffd00 bsp=e00000307a5f8e28
[<a0000001000aada0>] do_exit+0x1320/0x1380
sp=e00000307a5ffe10 bsp=e00000307a5f8dd0
[<a0000001000aaf40>] do_group_exit+0x140/0x160
sp=e00000307a5ffe30 bsp=e00000307a5f8d98
[<a0000001000aaf80>] sys_exit_group+0x20/0x40
sp=e00000307a5ffe30 bsp=e00000307a5f8d40
[<a00000010000b360>] ia64_ret_from_syscall+0x0/0x20
sp=e00000307a5ffe30 bsp=e00000307a5f8d40
[<a000000000010620>] __kernel_syscall_via_break+0x0/0x20
sp=e00000307a600000 bsp=e00000307a5f8d40Quoted 26 lines · Christoph Lameter
Quoted 4 lines · Andrew Morton
But usually none of that is necessary, because
io_schedule()does all the work for you.err, this might help.
Well okay boot progresses further (maybe only on this boot) but system is still hung.
Traces (this was a backtrace of all processes on the system. I removed the irrelevant ones):
Delaying for 5 seconds...
All OS INIT slaves have reached rendezvous
Processes interrupted by INIT - 0 (cpu 0 task0xa000000100b24000) 0 (cpu 1 task0xe00000b003bd8000) 0 (cpu 2 task0xe000023c38248000) 0 (cpu 3 task0xe00000b003d00000) 0 (cpu 4 task0xe000023c38258000) 0 (cpu 5 task0xe00000b003d10000) 0 (cpu 6 task0xe000023c38268000) 0 (cpu 7 task0xe00000b003d20000) 0 (cpu 8 task0xe000023c382e8000) 0 (cpu 9 task0xe00000b003d30000) 0 (cpu 10 task0xe000023c38380000) 0 (cpu 11 task0xe00000b003d40000)Backtrace of pid 1 (init)
Quoted 7 lines
Call Trace:
[<a000000100799bb0>] schedule+0x1bf0/0x1ec0
sp=e00000307bd178c0 bsp=e00000307bd11828
[<a000000100797b20>] __down+0x240/0x280
sp=e00000307bd179d0 bsp=e00000307bd117e8
[<a0000001003b8f10>] xfs_buf_iowait+0x50/0x80
sp=e00000307bd17a00 bsp=e00000307bd117c8That down() probably wants a replug to precede it. Probably something like:
if (atomic_read(&bp->b_io_remaining))
blk_replug_current_nested();for xfs_buf_wait_unpin() and xfs_buf_lock(). Does this fix it?
fs/xfs/linux-2.6/xfs_buf.c +13 -1
@@ -909,6 +909,8 @@ xfs_buf_lock( xfs_buf_t *bp) {XB_TRACE (bp,"lock" ,0 ); +if (atomic_read (&bp->b_io_remaining)) +blk_replug_current_nested ();down (&bp->b_sema);XB_SET_OWNER (bp);XB_TRACE (bp,"locked" ,0 );
@@ -979,7 +981,7 @@ xfs_buf_wait_unpin(set_current_state (TASK_UNINTERRUPTIBLE );if (atomic_read (&bp->b_pin_count) ==0 )break ; -schedule (); +io_schedule (); }remove_wait_queue (&bp->b_waiters, &wait);set_current_state (TASK_RUNNING );
@@ -1291,6 +1293,8 @@ xfs_buf_iowait( xfs_buf_t *bp) {XB_TRACE (bp,"iowait" ,0 ); +if (atomic_read (&bp->b_io_remaining)) +blk_replug_current_nested ();down (&bp->b_iodonesema);XB_TRACE (bp,"iowaited" , (long )bp->b_error);return bp->b_error;
@@ -1682,6 +1686,7 @@ xfsbufd(xfs_buf_t *bp, *n;struct list_head *dwq = &target->bt_delwrite_queue;spinlock_t *dwlk = &target->bt_delwrite_lock; +int count; current->flags |=PF_MEMALLOC ;
@@ -1697,6 +1702,7 @@ xfsbufd(schedule_timeout_interruptible ( xfs_buf_timer_centisecs *msecs_to_jiffies (10 )); + count =0 ; age = xfs_buf_age_centisecs *msecs_to_jiffies (10 );spin_lock (dwlk);list_for_each_entry_safe (bp, n, dwq, b_list) {
@@ -1716,6 +1722,7 @@ xfsbufd( _XBF_RUN_QUEUES); bp->b_flags |=XBF_WRITE ;list_move_tail (&bp->b_list, &tmp); + count++; } }spin_unlock (dwlk);
@@ -1730,6 +1737,8 @@ xfsbufd(if (as_list_len >0 )purge_addresses (); +if (count) +blk_replug_current_nested ();clear_bit (XBT_FORCE_FLUSH , &target->bt_flags); }while (!kthread_should_stop ());
@@ -1786,6 +1795,9 @@ xfs_flush_buftarg(xfs_buf_iostrategy (bp); } +if (wait) +blk_replug_current_nested (); +/* * Remaining list items must be flushed before returning */
Signature · 1 line
Jens Axboe
Quoted 1 line · Jens Axboe
for
xfs_buf_wait_unpin()andxfs_buf_lock(). Does this fix it?
No it still hangs consistently. This time at an earlier spot.
All OS INIT slaves have reached rendezvous
Processes interrupted by INIT - 0 (cpu 0 task 0xa000000100b24000) 0 (cpu 1 task 0xe00000b003bd8000) 0 (cpu 2 task 0xe000023c38248000) 0 (cpu 3 task 0xe00000b003d00000) 0 (cpu 4 task 0xe000023c38258000) 0 (cpu 5 task 0xe00000b003d10000) 0 (cpu 6 task 0xe000023c38268000) 0 (cpu 7 task 0xe00000b003d20000) 0 (cpu 8 task 0xe000023c382e8000) 0 (cpu 9 task 0xe00000b003d30000) 0 (cpu 10 task 0xe000023c38380000) 0 (cpu 11 task 0xe00000b003d40000)
Backtrace of pid 223 (pdflush)
Call Trace:
[<a000000100799ed0>] schedule+0x1bf0/0x1ec0
sp=e0000030156879d0 bsp=e0000030156811a8
[<a0000001000db490>] synchronize_qrcu+0x170/0x1e0
sp=e000003015687ae0 bsp=e000003015681170
[<a0000001003f6bc0>] __make_request+0x160/0x880
sp=e000003015687b10 bsp=e000003015681130
[<a0000001003f17c0>] generic_make_request+0x4a0/0x520
sp=e000003015687b30 bsp=e0000030156810f8
[<a0000001003f78f0>] submit_bio+0x2f0/0x320
sp=e000003015687b50 bsp=e0000030156810b0
[<a0000001003bab20>] xfs_buf_iorequest+0x740/0x820
sp=e000003015687b70 bsp=e000003015681040
[<a0000001003869d0>] xlog_bdstrat_cb+0x50/0xe0
sp=e000003015687ba0 bsp=e000003015681020
[<a000000100384150>] xlog_state_release_iclog+0x770/0xcc0
sp=e000003015687ba0 bsp=e000003015680fc0
[<a000000100384860>] xlog_state_sync_all+0x1c0/0x460
sp=e000003015687ba0 bsp=e000003015680f60
[<a000000100385010>] _xfs_log_force+0xd0/0x5c0
sp=e000003015687bd0 bsp=e000003015680f00
[<a0000001003a3720>] xfs_syncsub+0x40/0x520
sp=e000003015687c00 bsp=e000003015680eb0
[<a0000001003a3d50>] xfs_sync+0x70/0xa0
sp=e000003015687c00 bsp=e000003015680e88
[<a0000001003cb740>] vfs_sync+0xa0/0xc0
sp=e000003015687c00 bsp=e000003015680e58
[<a0000001003c8c50>] xfs_fs_write_super+0x70/0xa0
sp=e000003015687c00 bsp=e000003015680e38
[<a00000010016d490>] sync_supers+0x150/0x260
sp=e000003015687c00 bsp=e000003015680e08
[<a000000100115820>] wb_kupdate+0x60/0x280
sp=e000003015687c00 bsp=e000003015680dc8
[<a000000100116570>] pdflush+0x330/0x4e0
sp=e000003015687c50 bsp=e000003015680d90
[<a0000001000d2ac0>] kthread+0x220/0x2a0
sp=e000003015687d50 bsp=e000003015680d48
[<a000000100010a50>] kernel_thread_helper+0xd0/0x100
sp=e000003015687e30 bsp=e000003015680d20
[<a000000100009140>] start_kernel_thread+0x20/0x40
sp=e000003015687e30 bsp=e000003015680d20Backtrace of pid 1006 (xfsbufd)
Call Trace:
[<a000000100799ed0>] schedule+0x1bf0/0x1ec0
sp=e00002bc3a23fc00 bsp=e00002bc3a238e40
[<a00000010079b8f0>] schedule_timeout+0x110/0x180
sp=e00002bc3a23fd10 bsp=e00002bc3a238e10
[<a00000010079b9f0>] schedule_timeout_interruptible+0x30/0x60
sp=e00002bc3a23fd40 bsp=e00002bc3a238de8
[<a0000001003bd1d0>] xfsbufd+0x1b0/0x5e0
sp=e00002bc3a23fd40 bsp=e00002bc3a238d90
[<a0000001000d2ac0>] kthread+0x220/0x2a0
sp=e00002bc3a23fd50 bsp=e00002bc3a238d48
[<a000000100010a50>] kernel_thread_helper+0xd0/0x100
sp=e00002bc3a23fe30 bsp=e00002bc3a238d20
[<a000000100009140>] start_kernel_thread+0x20/0x40
sp=e00002bc3a23fe30 bsp=e00002bc3a238d20Backtrace of pid 1007 (xfssyncd)
Call Trace:
[<a000000100799ed0>] schedule+0x1bf0/0x1ec0
sp=e00002bc3a29fc00 bsp=e00002bc3a298e20
[<a00000010079b8f0>] schedule_timeout+0x110/0x180
sp=e00002bc3a29fd10 bsp=e00002bc3a298de8
[<a00000010079b9f0>] schedule_timeout_interruptible+0x30/0x60
sp=e00002bc3a29fd40 bsp=e00002bc3a298dc8
[<a0000001003c9c30>] xfssyncd+0xb0/0x400
sp=e00002bc3a29fd40 bsp=e00002bc3a298d90
[<a0000001000d2ac0>] kthread+0x220/0x2a0
sp=e00002bc3a29fd50 bsp=e00002bc3a298d48
[<a000000100010a50>] kernel_thread_helper+0xd0/0x100
sp=e00002bc3a29fe30 bsp=e00002bc3a298d20
[<a000000100009140>] start_kernel_thread+0x20/0x40
sp=e00002bc3a29fe30 bsp=e00002bc3a298d20Backtrace of pid 1010 (boot)
Call Trace:
[<a000000100799ed0>] schedule+0x1bf0/0x1ec0
sp=e00000b078797bd0 bsp=e00000b078791090
[<a000000100176860>] pipe_wait+0xc0/0x120
sp=e00000b078797ce0 bsp=e00000b078791068
[<a000000100177b70>] pipe_read+0x730/0x820
sp=e00000b078797d10 bsp=e00000b078790fb0
[<a000000100167ea0>] do_sync_read+0x180/0x200
sp=e00000b078797d10 bsp=e00000b078790f78
[<a000000100169470>] vfs_read+0x1b0/0x340
sp=e00000b078797e20 bsp=e00000b078790f28
[<a000000100169cd0>] sys_read+0x70/0xe0
sp=e00000b078797e20 bsp=e00000b078790eb0
[<a00000010000b360>] ia64_ret_from_syscall+0x0/0x20
sp=e00000b078797e30 bsp=e00000b078790eb0
[<a000000000010620>] __kernel_syscall_via_break+0x0/0x20
sp=e00000b078798000 bsp=e00000b078790eb0Backtrace of pid 1031 (startpar)
Call Trace:
[<a000000100799ed0>] schedule+0x1bf0/0x1ec0
sp=e000003015867950 bsp=e000003015861000
[<a00000010079b820>] schedule_timeout+0x40/0x180
sp=e000003015867a60 bsp=e000003015860fc8
[<a000000100186f60>] do_select+0x360/0x840
sp=e000003015867a90 bsp=e000003015860ee8
[<a000000100187a50>] sys_select+0x610/0x9e0
sp=e000003015867ce0 bsp=e000003015860e50
[<a00000010000b360>] ia64_ret_from_syscall+0x0/0x20
sp=e000003015867e30 bsp=e000003015860e50
[<a000000000010620>] __kernel_syscall_via_break+0x0/0x20
sp=e000003015868000 bsp=e000003015860e50Backtrace of pid 1063 (udevd)
Call Trace:
[<a000000100799ed0>] schedule+0x1bf0/0x1ec0
sp=e000003015cbf950 bsp=e000003015cb8f78
[<a00000010079b820>] schedule_timeout+0x40/0x180
sp=e000003015cbfa60 bsp=e000003015cb8f48
[<a000000100186f60>] do_select+0x360/0x840
sp=e000003015cbfa90 bsp=e000003015cb8e68
[<a000000100187a50>] sys_select+0x610/0x9e0
sp=e000003015cbfce0 bsp=e000003015cb8dc8
[<a00000010000b360>] ia64_ret_from_syscall+0x0/0x20
sp=e000003015cbfe30 bsp=e000003015cb8dc8
[<a000000000010620>] __kernel_syscall_via_break+0x0/0x20
sp=e000003015cc0000 bsp=e000003015cb8dc8Backtrace of pid 2061 (boot.md)
Call Trace:
[<a000000100799ed0>] schedule+0x1bf0/0x1ec0
sp=e00000300b97fcf0 bsp=e00000300b979028
[<a0000001000a9430>] do_wait+0x1c50/0x20e0
sp=e00000300b97fe00 bsp=e00000300b978fa8
[<a0000001000a9920>] sys_wait4+0x60/0x80
sp=e00000300b97fe30 bsp=e00000300b978f50
[<a00000010000b360>] ia64_ret_from_syscall+0x0/0x20
sp=e00000300b97fe30 bsp=e00000300b978f50
[<a000000000010620>] __kernel_syscall_via_break+0x0/0x20
sp=e00000300b980000 bsp=e00000300b978f50Backtrace of pid 2063 (lk)
Call Trace:
[<a000000100799ed0>] schedule+0x1bf0/0x1ec0
sp=e00000300bc8fcf0 bsp=e00000300bc89028
[<a0000001000a9430>] do_wait+0x1c50/0x20e0
sp=e00000300bc8fe00 bsp=e00000300bc88fa8
[<a0000001000a9920>] sys_wait4+0x60/0x80
sp=e00000300bc8fe30 bsp=e00000300bc88f50
[<a00000010000b360>] ia64_ret_from_syscall+0x0/0x20
sp=e00000300bc8fe30 bsp=e00000300bc88f50
[<a000000000010620>] __kernel_syscall_via_break+0x0/0x20
sp=e00000300bc90000 bsp=e00000300bc88f50Backtrace of pid 2089 (lk_bios)
Call Trace:
[<a000000100799ed0>] schedule+0x1bf0/0x1ec0
sp=e00001b03852f8b0 bsp=e00001b038529618
[<a00000010079b820>] schedule_timeout+0x40/0x180
sp=e00001b03852f9c0 bsp=e00001b0385295e0
[<a000000100385440>] _xfs_log_force+0x500/0x5c0
sp=e00001b03852f9f0 bsp=e00001b038529580
[<a00000010030cd10>] xfs_alloc_search_busy+0x190/0x1e0
sp=e00001b03852fa20 bsp=e00001b038529538
[<a000000100311030>] xfs_alloc_ag_vextent+0x2250/0x2420
sp=e00001b03852fa20 bsp=e00001b0385294a8
[<a0000001003124b0>] xfs_alloc_vextent+0x690/0x9c0
sp=e00001b03852fa60 bsp=e00001b038529428
[<a000000100332560>] xfs_bmapi+0x1e00/0x33a0
sp=e00001b03852fa60 bsp=e00001b0385292d8
[<a00000010037e770>] xfs_iomap_write_allocate+0x3f0/0x760
sp=e00001b03852fba0 bsp=e00001b038529248
[<a00000010037d670>] xfs_iomap+0x670/0xb00
sp=e00001b03852fc30 bsp=e00001b0385291d0
[<a0000001003c5dc0>] xfs_bmap+0x40/0x60
sp=e00001b03852fc80 bsp=e00001b038529188
[<a0000001003b5b60>] xfs_map_blocks+0xa0/0x120
sp=e00001b03852fc80 bsp=e00001b038529148
[<a0000001003b6280>] xfs_page_state_convert+0x540/0x1a40
sp=e00001b03852fc90 bsp=e00001b038529080
[<a0000001003b7e40>] xfs_vm_writepage+0x180/0x220
sp=e00001b03852fd50 bsp=e00001b038529040
[<a0000001001146e0>] generic_writepages+0x420/0x800
sp=e00001b03852fd60 bsp=e00001b038528fc0
[<a0000001003b7f70>] xfs_vm_writepages+0x90/0xc0
sp=e00001b03852fdf0 bsp=e00001b038528f88
[<a000000100114b70>] do_writepages+0xb0/0x120
sp=e00001b03852fdf0 bsp=e00001b038528f58
[<a000000100108470>] __filemap_fdatawrite_range+0xb0/0xe0
sp=e00001b03852fdf0 bsp=e00001b038528f20
[<a0000001001089c0>] filemap_fdatawrite+0x40/0x60
sp=e00001b03852fe30 bsp=e00001b038528f00
[<a0000001003bf320>] fs_flush_pages+0xc0/0x100
sp=e00001b03852fe30 bsp=e00001b038528eb8
[<a0000001003adb10>] xfs_close+0x190/0x1e0
sp=e00001b03852fe30 bsp=e00001b038528e80
[<a0000001003be820>] xfs_file_close+0xa0/0xc0
sp=e00001b03852fe30 bsp=e00001b038528e60
[<a0000001001643b0>] filp_close+0xd0/0x140
sp=e00001b03852fe30 bsp=e00001b038528e30
[<a000000100164560>] sys_close+0x140/0x1e0
sp=e00001b03852fe30 bsp=e00001b038528db0
[<a00000010000b360>] ia64_ret_from_syscall+0x0/0x20
sp=e00001b03852fe30 bsp=e00001b038528db0
[<a000000000010620>] __kernel_syscall_via_break+0x0/0x20
sp=e00001b038530000 bsp=e00001b038528db0Backtrace of pid 2091 (mdrun)
Call Trace:
[<a000000100799ed0>] schedule+0x1bf0/0x1ec0
sp=e000013038907bd0 bsp=e000013038901090
[<a000000100176860>] pipe_wait+0xc0/0x120
sp=e000013038907ce0 bsp=e000013038901068
[<a000000100177b70>] pipe_read+0x730/0x820
sp=e000013038907d10 bsp=e000013038900fb0
[<a000000100167ea0>] do_sync_read+0x180/0x200
sp=e000013038907d10 bsp=e000013038900f78
[<a000000100169470>] vfs_read+0x1b0/0x340
sp=e000013038907e20 bsp=e000013038900f28
[<a000000100169cd0>] sys_read+0x70/0xe0
sp=e000013038907e20 bsp=e000013038900eb0
[<a00000010000b360>] ia64_ret_from_syscall+0x0/0x20
sp=e000013038907e30 bsp=e000013038900eb0
[<a000000000010620>] __kernel_syscall_via_break+0x0/0x20
sp=e000013038908000 bsp=e000013038900eb0Backtrace of pid 2134 (mdrun)
Call Trace:
[<a000000100799ed0>] schedule+0x1bf0/0x1ec0
sp=e00002b83b9d7cf0 bsp=e00002b83b9d1028
[<a0000001000a9430>] do_wait+0x1c50/0x20e0
sp=e00002b83b9d7e00 bsp=e00002b83b9d0fa8
[<a0000001000a9920>] sys_wait4+0x60/0x80
sp=e00002b83b9d7e30 bsp=e00002b83b9d0f50
[<a00000010000b360>] ia64_ret_from_syscall+0x0/0x20
sp=e00002b83b9d7e30 bsp=e00002b83b9d0f50
[<a000000000010620>] __kernel_syscall_via_break+0x0/0x20
sp=e00002b83b9d8000 bsp=e00002b83b9d0f50Backtrace of pid 2135 (mdadm)
Call Trace:
[<a000000100799ed0>] schedule+0x1bf0/0x1ec0
sp=e000003015c07b40 bsp=e000003015c01250
[<a00000010079a290>] io_schedule+0xf0/0x120
sp=e000003015c07c50 bsp=e000003015c01228
[<a00000010079a310>] io_wait_schedule+0x50/0x80
sp=e000003015c07c50 bsp=e000003015c01208
[<a000000100106260>] sleep_on_page+0x20/0x40
sp=e000003015c07c50 bsp=e000003015c011d8
[<a00000010079bad0>] __wait_on_bit_lock+0xb0/0x1c0
sp=e000003015c07c50 bsp=e000003015c01190
[<a000000100106210>] lock_page_blocking+0x70/0xa0
sp=e000003015c07c50 bsp=e000003015c01168
[<a000000100114590>] generic_writepages+0x2d0/0x800
sp=e000003015c07c50 bsp=e000003015c010f0
[<a0000001003b7f70>] xfs_vm_writepages+0x90/0xc0
sp=e000003015c07ce0 bsp=e000003015c010b8
[<a000000100114b70>] do_writepages+0xb0/0x120
sp=e000003015c07ce0 bsp=e000003015c01088
[<a0000001001ac8f0>] __writeback_single_inode+0x450/0x8a0
sp=e000003015c07ce0 bsp=e000003015c01028
[<a0000001001ad670>] generic_sync_sb_inodes+0x4d0/0x740
sp=e000003015c07d20 bsp=e000003015c00fc0
[<a0000001001ad970>] sync_sb_inodes+0x90/0xc0
sp=e000003015c07d20 bsp=e000003015c00f98
[<a0000001001adac0>] sync_inodes_sb+0x120/0x140
sp=e000003015c07d20 bsp=e000003015c00f70
[<a00000010016bdb0>] __fsync_super+0x30/0x1c0
sp=e000003015c07d60 bsp=e000003015c00f50
[<a00000010016bf70>] fsync_super+0x30/0x60
sp=e000003015c07d60 bsp=e000003015c00f30
[<a0000001001b7c70>] fsync_bdev+0x50/0xc0
sp=e000003015c07d60 bsp=e000003015c00f08
[<a0000001003f8900>] blkdev_ioctl+0x100/0x11e0
sp=e000003015c07d60 bsp=e000003015c00e98
[<a0000001001c25e0>] block_ioctl+0x40/0x60
sp=e000003015c07e10 bsp=e000003015c00e68
[<a000000100184d30>] do_ioctl+0x90/0x180
sp=e000003015c07e10 bsp=e000003015c00e28
[<a0000001001856a0>] vfs_ioctl+0x880/0x8e0
sp=e000003015c07e10 bsp=e000003015c00dd8
[<a000000100185760>] sys_ioctl+0x60/0xc0
sp=e000003015c07e20 bsp=e000003015c00d60
[<a00000010000b360>] ia64_ret_from_syscall+0x0/0x20
sp=e000003015c07e30 bsp=e000003015c00d60
[<a000000000010620>] __kernel_syscall_via_break+0x0/0x20
sp=e000003015c08000 bsp=e000003015c00d60Backtrace of pid 2136 (grep)
Call Trace:
[<a000000100799ed0>] schedule+0x1bf0/0x1ec0
sp=e00000300bd67bd0 bsp=e00000300bd60f08
[<a000000100176860>] pipe_wait+0xc0/0x120
sp=e00000300bd67ce0 bsp=e00000300bd60ee0
[<a000000100177b70>] pipe_read+0x730/0x820
sp=e00000300bd67d10 bsp=e00000300bd60e30
[<a000000100167ea0>] do_sync_read+0x180/0x200
sp=e00000300bd67d10 bsp=e00000300bd60df0
[<a000000100169470>] vfs_read+0x1b0/0x340
sp=e00000300bd67e20 bsp=e00000300bd60da0
[<a000000100169cd0>] sys_read+0x70/0xe0
sp=e00000300bd67e20 bsp=e00000300bd60d28
[<a00000010000b360>] ia64_ret_from_syscall+0x0/0x20
sp=e00000300bd67e30 bsp=e00000300bd60d28
[<a000000000010620>] __kernel_syscall_via_break+0x0/0x20
sp=e00000300bd68000 bsp=e00000300bd60d28Backtrace of pid 2137 (sed)
Call Trace:
[<a000000100799ed0>] schedule+0x1bf0/0x1ec0
sp=e000003015acfbd0 bsp=e000003015ac9008
[<a000000100176860>] pipe_wait+0xc0/0x120
sp=e000003015acfce0 bsp=e000003015ac8fd8
[<a000000100177b70>] pipe_read+0x730/0x820
sp=e000003015acfd10 bsp=e000003015ac8f28
[<a000000100167ea0>] do_sync_read+0x180/0x200
sp=e000003015acfd10 bsp=e000003015ac8ef0
[<a000000100169470>] vfs_read+0x1b0/0x340
sp=e000003015acfe20 bsp=e000003015ac8ea0
[<a000000100169cd0>] sys_read+0x70/0xe0
sp=e000003015acfe20 bsp=e000003015ac8e28
[<a00000010000b360>] ia64_ret_from_syscall+0x0/0x20
sp=e000003015acfe30 bsp=e000003015ac8e28
[<a000000000010620>] __kernel_syscall_via_break+0x0/0x20
sp=e000003015ad0000 bsp=e000003015ac8e28Quoted 5 lines · Christoph Lameter
Quoted 1 line · Jens Axboe
for
xfs_buf_wait_unpin()andxfs_buf_lock(). Does this fix it?No it still hangs consistently. This time at an earlier spot.
That looks like barriers, could you try with those disabled? Sorry for making you go through this, I can't debug and fix it myself before monday.
Signature · 1 line
Jens Axboe
Quoted 3 lines · Jens Axboe
That looks like barriers, could you try with those disabled? Sorry for making you go through this, I can't debug and fix it myself before monday.
Disabling barriers + your patch works. Modified /etc/fstab and added a nobarrier option to the root filesystem. If I take your patch out then the systems hangs again.
Quoted 9 lines · Christoph Lameter
Quoted 3 lines · Jens Axboe
That looks like barriers, could you try with those disabled? Sorry for making you go through this, I can't debug and fix it myself before monday.
Disabling barriers + your patch works. Modified
/etc/fstaband added a nobarrier option to the root filesystem. If I take your patch out then the systems hangs again.
I can't reproduce this. Can you see if this debug patch catches anything? You need to enable barriers again.
kernel/sched.c +4 -0
@@ -3434,6 +3434,10 @@ asmlinkage void __sched schedule(void)print_irqtrace_events (current);dump_stack (); } +if (unlikely (current->io_context && current->io_context->plugged)) { +printk (KERN_ERR "%s: schedules plugged\n" , current->comm); +print_irqtrace_events (current); + }profile_hit (SCHED_PROFILING ,__builtin_return_address (0 )); need_resched:
Signature · 1 line
Jens Axboe
Quoted 7 lines · Jens Axboe
Quoted 6 lines · Christoph Lameter
Quoted 3 lines · Jens Axboe
That looks like barriers, could you try with those disabled? Sorry for making you go through this, I can't debug and fix it myself before monday.
Quoted 6 lines
Quoted 3 lines
Disabling barriers + your patch works. Modified
/etc/fstaband added a nobarrier option to the root filesystem. If I take your patch out then the systems hangs again.I can't reproduce this. Can you see if this debug patch catches anything? You need to enable barriers again.
Nevermind, that was too aggressive. I'll come up with a better debug patch.
Signature · 1 line
Jens Axboe
Quoted 12 lines · Jens Axboe
Quoted 11 lines · Jens Axboe
Quoted 9 lines · Christoph Lameter
Quoted 3 lines · Jens Axboe
That looks like barriers, could you try with those disabled? Sorry for making you go through this, I can't debug and fix it myself before monday.
Disabling barriers + your patch works. Modified
/etc/fstaband added a nobarrier option to the root filesystem. If I take your patch out then the systems hangs again.
Quoted 5 lines
Quoted 2 lines
I can't reproduce this. Can you see if this debug patch catches anything? You need to enable barriers again.
Nevermind, that was too aggressive. I'll come up with a better debug patch.
Alright, try this one. It should show whether this is a missing unplug or not (which I think it is, hence the stall in qrcu sync). A process may legitimately block with plugged requests, that sometimes happens for bio/rq allocation etc. In that case we do want to unplug anyway though, as I don't think we should hold requests plugged even for a merge if we are going to block. And the below means we can move this out of io_schedule() and eliminate the io_schedule() requirement that I'm not too fond of, as I don't want to reintroduce all the problems we had with missing unplugs in the 2.4 kernels.
But for now this is just a debug test, can you see if xfs with barriers for that kernel now works as expected?
kernel/sched.c +2 -0
@@ -3434,6 +3434,8 @@ asmlinkage void __sched schedule(void)print_irqtrace_events (current);dump_stack (); } +if (unlikely (current->io_context && current->io_context->plugged)) +blk_replug_current_nested ();profile_hit (SCHED_PROFILING ,__builtin_return_address (0 )); need_resched:
Signature · 1 line
Jens Axboe
Quoted 2 lines · Jens Axboe
But for now this is just a debug test, can you see if xfs with barriers for that kernel now works as expected?
The kernel that failed before boots fine with this patch.
Quoted 6 lines · Christoph Lameter
Quoted 2 lines · Jens Axboe
But for now this is just a debug test, can you see if xfs with barriers for that kernel now works as expected?
The kernel that failed before boots fine with this patch.
Wonderful, I'll leave the patch in-place for now.
Signature · 1 line
Jens Axboe
Quoted 7 lines · Jens Axboe
That
down()probably wants a replug to precede it. Probably something like:if (atomic_read(&bp->b_io_remaining)) blk_replug_current_nested();for
xfs_buf_wait_unpin()andxfs_buf_lock(). Does this fix it?
Jens, this patch looks like you originally removed the explicit unplug calls that XFS used to prevent metadata I/O hangs and now you are putting them back. Correct?
Reading on from Andrew's earlier comments, shouldn't XFS have worked unchanged? I'm just trying to understand why you removed the explicit unplugs in the first place.....
Cheers,
Dave.
Signature · 3 lines
Dave Chinner Principal Engineer SGI Australian Software Group
Quoted 9 lines · David Chinner
Quoted 7 lines · Jens Axboe
That
down()probably wants a replug to precede it. Probably something like:if (atomic_read(&bp->b_io_remaining)) blk_replug_current_nested();for
xfs_buf_wait_unpin()andxfs_buf_lock(). Does this fix it?
Quoted 7 lines
Jens, this patch looks like you originally removed the explicit unplug calls that XFS used to prevent metadata I/O hangs and now you are putting them back. Correct?
Reading on from Andrew's earlier comments, shouldn't XFS have worked unchanged? I'm just trying to understand why you removed the explicit unplugs in the first place.....
It should, the problem is if someone has plugged higher up in the hierarchy, then you do need the explicit replug to drain that before going to sleep and waiting for IO to complete. Not very happy about that situation, I'd prefer if that happened automagically. I'll likely change the code to fix that, so we don't have to sprinkle blk_replug_current_nested() and always call io_schedule() instead of schedule(). It's just going to cause too many problems.
Signature · 1 line
Jens Axboe
Hello !
changes in git-acpi.patch in 2.6.20-rc6-mm3 (and maybe before) broke the Summit sub-arch (IBM x440) compile :(
thanks,
C.
CC arch/i386/kernel/cpu/intel.o
CC arch/i386/kernel/early_printk.oarch/i386/kernel/srat.c: In function 'parse_cpu_affinity_structure':arch/i386/kernel/srat.c:68: error: dereferencing pointer to incomplete type arch/i386/kernel/srat.c:72: error: dereferencing pointer to incomplete type arch/i386/kernel/srat.c:72: error: dereferencing pointer to incomplete type arch/i386/kernel/srat.c:74: error: dereferencing pointer to incomplete type arch/i386/kernel/srat.c:74: error: dereferencing pointer to incomplete type arch/i386/kernel/srat.c:77: error: dereferencing pointer to incomplete type arch/i386/kernel/srat.c:77: error: dereferencing pointer to incomplete type arch/i386/kernel/srat.c: In function 'parse_memory_affinity_structure':arch/i386/kernel/srat.c:93: error: dereferencing pointer to incomplete type arch/i386/kernel/srat.c:97: error: dereferencing pointer to incomplete type arch/i386/kernel/srat.c:97: error: dereferencing pointer to incomplete type arch/i386/kernel/srat.c:100: error: dereferencing pointer to incomplete type arch/i386/kernel/srat.c:101: error: dereferencing pointer to incomplete type arch/i386/kernel/srat.c:102: error: dereferencing pointer to incomplete type arch/i386/kernel/srat.c:103: error: dereferencing pointer to incomplete type arch/i386/kernel/srat.c:108: error: dereferencing pointer to incomplete type arch/i386/kernel/srat.c:134: error: dereferencing pointer to incomplete type arch/i386/kernel/srat.c:135: error: dereferencing pointer to incomplete type arch/i386/kernel/srat.c:136: error: dereferencing pointer to incomplete type arch/i386/kernel/srat.c: In function 'acpi20_parse_srat':arch/i386/kernel/srat.c:188: error: 'ACPI_SRAT_PROCESSOR_AFFINITY' undeclared (first use in this function) arch/i386/kernel/srat.c:188: error: (Each undeclared identifier is reported only once arch/i386/kernel/srat.c:188: error: for each function it appears in.) arch/i386/kernel/srat.c:191: error: 'ACPI_SRAT_MEMORY_AFFINITY' undeclared (first use in this function) arch/i386/kernel/srat.c: In function 'get_memcfg_from_srat':arch/i386/kernel/srat.c:275: error: 'ACPI_PHYSICAL_ADDRESSING' undeclared (first use in this function) arch/i386/kernel/srat.c:275: error: too many arguments to function 'acpi_find_root_pointer' arch/i386/kernel/srat.c:282: error: dereferencing pointer to incomplete type arch/i386/kernel/srat.c:282: error: 'ACPI_PHYSICAL_POINTER' undeclared (first use in this function) arch/i386/kernel/srat.c:285: error: dereferencing pointer to incomplete type arch/i386/kernel/srat.c:298: error: 'RSDP_SIG' undeclared (first use in this function) arch/i386/kernel/srat.c:304: error: 'struct acpi_table_rsdp' has no member named 'rsdt_address' arch/i386/kernel/srat.c:315: error: 'RSDT_SIG' undeclared (first use in this function) arch/i386/kernel/srat.c:344: error: 'struct acpi_table_rsdt' has no member named 'entry' arch/i386/kernel/srat.c:348: error: 'struct acpi_table_rsdt' has no member named 'entry'
SYSCALL arch/i386/kernel/vsyscall-syms.o
make[1]: *** [arch/i386/kernel/srat.o] Error 1
make[1]: *** Waiting for unfinished jobs....
Sorry, here is the patch... ACPI has switched to acpi_find_rsdp(), so srat.c might want to do that too, please check.
Thanks,
Alex.
Quoted 5 lines
-----Original Message-----
From: Cedric Le Goater [mailto:[email protected]]
Sent: Thursday, February 01, 2007 9:24 PM
To: Andrew Morton
Cc: [email protected]; Moore, Robert; Starikovskiy, Alexey
Y;
Quoted 6 lines
keith mannthey
Subject: Re: 2.6.20-rc6-mm3Hello !
changes in git-acpi.patch in 2.6.20-rc6-mm3 (and maybe before) broke
the
Quoted 11 lines
Summit
sub-arch (IBM x440) compile :(thanks,
C.
CC
arch/i386/kernel/cpu/intel.o
CCarch/i386/kernel/early_printk.oarch/i386/kernel/srat.c: In function 'parse_cpu_affinity_structure':arch/i386/kernel/srat.c:68: error: dereferencing pointer to incomplete
type
Quoted 1 line
arch/i386/kernel/srat.c:72: error: dereferencing pointer to incomplete
type
Quoted 1 line
arch/i386/kernel/srat.c:72: error: dereferencing pointer to incomplete
type
Quoted 1 line
arch/i386/kernel/srat.c:74: error: dereferencing pointer to incomplete
type
Quoted 1 line
arch/i386/kernel/srat.c:74: error: dereferencing pointer to incomplete
type
Quoted 1 line
arch/i386/kernel/srat.c:77: error: dereferencing pointer to incomplete
type
Quoted 1 line
arch/i386/kernel/srat.c:77: error: dereferencing pointer to incomplete
type
Quoted 2 lines
arch/i386/kernel/srat.c: In function 'parse_memory_affinity_structure':arch/i386/kernel/srat.c:93: error: dereferencing pointer to incomplete
type
Quoted 1 line
arch/i386/kernel/srat.c:97: error: dereferencing pointer to incomplete
type
Quoted 1 line
arch/i386/kernel/srat.c:97: error: dereferencing pointer to incomplete
type
Quoted 12 lines
arch/i386/kernel/srat.c:100: error: dereferencing pointer to incomplete typearch/i386/kernel/srat.c:101: error: dereferencing pointer to incomplete typearch/i386/kernel/srat.c:102: error: dereferencing pointer to incomplete typearch/i386/kernel/srat.c:103: error: dereferencing pointer to incomplete typearch/i386/kernel/srat.c:108: error: dereferencing pointer to incomplete typearch/i386/kernel/srat.c:134: error: dereferencing pointer to incomplete type
Quoted 8 lines
arch/i386/kernel/srat.c:135: error: dereferencing pointer to incomplete typearch/i386/kernel/srat.c:136: error: dereferencing pointer to incomplete typearch/i386/kernel/srat.c: In function 'acpi20_parse_srat':arch/i386/kernel/srat.c:188: error: 'ACPI_SRAT_PROCESSOR_AFFINITY' undeclared (first use in this function)arch/i386/kernel/srat.c:188: error: (Each undeclared identifier is
reported
Quoted 3 lines
only once
arch/i386/kernel/srat.c:188: error: for each function it appears in.)arch/i386/kernel/srat.c:191: error: 'ACPI_SRAT_MEMORY_AFFINITY'
undeclared
Quoted 3 lines
(first use in this function)
arch/i386/kernel/srat.c: In function 'get_memcfg_from_srat':arch/i386/kernel/srat.c:275: error: 'ACPI_PHYSICAL_ADDRESSING'
undeclared
Quoted 4 lines
(first use in this function)
arch/i386/kernel/srat.c:275: error: too many arguments to function 'acpi_find_root_pointer'arch/i386/kernel/srat.c:282: error: dereferencing pointer to incomplete
Quoted 8 lines
type
arch/i386/kernel/srat.c:282: error: 'ACPI_PHYSICAL_POINTER' undeclared (first use in this function)arch/i386/kernel/srat.c:285: error: dereferencing pointer to incomplete typearch/i386/kernel/srat.c:298: error: 'RSDP_SIG' undeclared (first use in this function)arch/i386/kernel/srat.c:304: error: 'structacpi_table_rsdp' has no
member
Quoted 4 lines
named '
rsdt_address'arch/i386/kernel/srat.c:315: error: 'RSDT_SIG' undeclared (first use in this function)arch/i386/kernel/srat.c:344: error: 'structacpi_table_rsdt' has no
member
Quoted 2 lines
named 'entry'
arch/i386/kernel/srat.c:348: error: 'structacpi_table_rsdt' has no
member
Quoted 4 lines
named 'entry'
SYSCALLarch/i386/kernel/vsyscall-syms.o
make[1]: *** [arch/i386/kernel/srat.o] Error 1
make[1]: *** Waiting for unfinished jobs....
Make srat.c in i386 compile again.
From: Alexey Starikovskiy <[email protected]>
---
arch/i386/kernel/srat.c | 77 +++++++++++++++++++++++------------------------ 1 files changed, 37 insertions(+), 40 deletions(-)
arch/i386/kernel/srat.c +37 -40
@@ -62,19 +62,19 @@ extern void * boot_ioremap(unsigned long/* Identify CPU proximity domains */ static void __init parse_cpu_affinity_structure (char *p) { -struct acpi_table_processor_affinity *cpu_affinity = - (struct acpi_table_processor_affinity *) p; +struct acpi_srat_cpu_affinity *cpu_affinity = + (struct acpi_srat_cpu_affinity *) p; -if (!cpu_affinity->flags.enabled) +if ((cpu_affinity->flags &ACPI_SRAT_CPU_ENABLED ) ==0 )return ;/* empty entry */ /* mark this node as "seen" in node bitmap */ -BMAP_SET (pxm_bitmap, cpu_affinity->proximity_domain); +BMAP_SET (pxm_bitmap, cpu_affinity->proximity_domain_lo); - apicid_to_pxm[cpu_affinity->apic_id] = cpu_affinity->proximity_domain; + apicid_to_pxm[cpu_affinity->apic_id] = cpu_affinity->proximity_domain_lo;printk ("CPU 0x%02X in proximity domain 0x%02X\n" , - cpu_affinity->apic_id, cpu_affinity->proximity_domain); + cpu_affinity->apic_id, cpu_affinity->proximity_domain_lo); }/*
@@ -87,25 +87,24 @@ static void __init parse_memory_affinityunsigned long start_pfn, end_pfn;u8 pxm;struct node_memory_chunk_s *p, *q, *pend; -struct acpi_table_memory_affinity *memory_affinity = - (struct acpi_table_memory_affinity *) sratp; +struct acpi_srat_mem_affinity *memory_affinity = + (struct acpi_srat_mem_affinity *) sratp; -if (!memory_affinity->flags.enabled) +if ((memory_affinity->flags &ACPI_SRAT_MEM_ENABLED ) ==0 )return ;/* empty entry */ + pxm = memory_affinity->proximity_domain &0xff ; +/* mark this node as "seen" in node bitmap */ -BMAP_SET (pxm_bitmap, memory_affinity->proximity_domain); +BMAP_SET (pxm_bitmap, pxm);/* calculate info for memory chunk structure */ - paddr = memory_affinity->base_addr_hi; - paddr = (paddr <<32 ) | memory_affinity->base_addr_lo; - size = memory_affinity->length_hi; - size = (size <<32 ) | memory_affinity->length_lo; + paddr = memory_affinity->base_address; + size = memory_affinity->length; start_pfn = paddr >>PAGE_SHIFT ; end_pfn = (paddr + size) >>PAGE_SHIFT ; - pxm = memory_affinity->proximity_domain;if (num_memory_chunks >=MAXCHUNKS ) { printk("Too many mem chunks in SRAT. Ignoring %lld MBytes at %llx\n",
@@ -132,8 +131,8 @@ static void __init parse_memory_affinityprintk ("Memory range 0x%lX to 0x%lX (type 0x%X) in proximity domain 0x%02X %s\n" , start_pfn, end_pfn, memory_affinity->memory_type, - memory_affinity->proximity_domain, - (memory_affinity->flags.hot_pluggable ? + pxm, + ((memory_affinity->flags &ACPI_SRAT_MEM_HOT_PLUGGABLE ) ?"enabled and removable" :"enabled" ) ); }
@@ -185,10 +184,10 @@ static int __init acpi20_parse_srat(stru num_memory_chunks =0 ;while (p < end) {switch (*p) { -case ACPI_SRAT_PROCESSOR_AFFINITY : +case ACPI_SRAT_TYPE_CPU_AFFINITY :parse_cpu_affinity_structure (p);break ; -case ACPI_SRAT_MEMORY_AFFINITY : +case ACPI_SRAT_TYPE_MEMORY_AFFINITY :parse_memory_affinity_structure (p);break ;default :
@@ -262,31 +261,29 @@ out_fail:return 0 ; } +struct acpi_static_rsdt { +struct acpi_table_rsdt table; +u32 padding[7 ];/* Allow for 7 more table entries */ +}; +int __init get_memcfg_from_srat (void ) {struct acpi_table_header *header =NULL ;struct acpi_table_rsdp *rsdp =NULL ;struct acpi_table_rsdt *rsdt =NULL ; -struct acpi_pointer *rsdp_address =NULL ; -struct acpi_table_rsdt saved_rsdt; +acpi_native_uint rsdp_address =0 ; +struct acpi_static_rsdt saved_rsdt;int tables =0 ;int i =0 ; -if (ACPI_FAILURE (acpi_find_root_pointer (ACPI_PHYSICAL_ADDRESSING , - rsdp_address))) { +if (ACPI_FAILURE (acpi_find_root_pointer (&rsdp_address))) {printk ("%s: System description tables not found\n" , __FUNCTION__); goto out_err; } -if (rsdp_address->pointer_type ==ACPI_PHYSICAL_POINTER ) { -printk ("%s: assigning address to rsdp\n" , __FUNCTION__); - rsdp = (struct acpi_table_rsdp *) - (u32 )rsdp_address->pointer.physical; - }else { -printk ("%s: rsdp_address is not a physical pointer\n" , __FUNCTION__); - goto out_err; - } +printk ("%s: assigning address to rsdp\n" , __FUNCTION__); + rsdp = (struct acpi_table_rsdp *)(u32 )rsdp_address;if (!rsdp) {printk ("%s: Didn't find ACPI root!\n" , __FUNCTION__); goto out_err;
@@ -295,13 +292,13 @@ int __init get_memcfg_from_srat(void)printk (KERN_INFO "%.8s v%d [%.6s]\n" , rsdp->signature, rsdp->revision, rsdp->oem_id); -if (strncmp (rsdp->signature,RSDP_SIG ,strlen (RSDP_SIG ))) { +if (strncmp (rsdp->signature,ACPI_SIG_RSDP ,strlen (ACPI_SIG_RSDP ))) {printk (KERN_WARNING "%s: RSDP table signature incorrect\n" , __FUNCTION__); goto out_err; } rsdt = (struct acpi_table_rsdt *) -boot_ioremap (rsdp->rsdt_address,sizeof (struct acpi_table_rsdt )); +boot_ioremap (rsdp->rsdt_physical_address,sizeof (struct acpi_table_rsdt ));if (!rsdt) { printk(KERN_WARNING
@@ -310,9 +307,9 @@ int __init get_memcfg_from_srat(void) goto out_err; } - header = & rsdt->header; + header = &rsdt->header; -if (strncmp (header->signature,RSDT_SIG ,strlen (RSDT_SIG ))) { +if (strncmp (header->signature,ACPI_SIG_RSDT ,strlen (ACPI_SIG_RSDT ))) {printk (KERN_WARNING "ACPI: RSDT signature incorrect\n" ); goto out_err; }
@@ -330,9 +327,9 @@ int __init get_memcfg_from_srat(void)memcpy (&saved_rsdt, rsdt,sizeof (saved_rsdt)); -if (saved_rsdt.header.length >sizeof (saved_rsdt)) { +if (saved_rsdt.table.header.length >sizeof (saved_rsdt)) {printk (KERN_WARNING "ACPI: Too big length in RSDT: %d\n" , - saved_rsdt.header.length); + saved_rsdt.table.header.length); goto out_err; }
@@ -341,15 +338,15 @@ int __init get_memcfg_from_srat(void)for (i =0 ; i < tables; i++) {/* Map in header, then map in full table length. */ header = (struct acpi_table_header *) -boot_ioremap (saved_rsdt.entry[i],sizeof (struct acpi_table_header )); +boot_ioremap (saved_rsdt.table.table_offset_entry[i],sizeof (struct acpi_table_header ));if (!header)break ; header = (struct acpi_table_header *) -boot_ioremap (saved_rsdt.entry[i], header->length); +boot_ioremap (saved_rsdt.table.table_offset_entry[i], header->length);if (!header)break ; -if (strncmp ((char *) &header->signature,"SRAT" ,4 )) +if (strncmp ((char *) &header->signature,ACPI_SIG_SRAT ,4 ))continue ;/* we've found the srat table. don't need to look at any more tables */
Quoted 2 lines · Alexey Y
Sorry, here is the patch... ACPI has switched to
acpi_find_rsdp(), sosrat.cmight want to do that too, please check.
got it. running a compile and boot test.
I should have the results in 'my' morning (UTC+1).
Thanks !
C.
Quoted 5 lines · Cedric Le Goater
Quoted 2 lines · Alexey Y
Sorry, here is the patch... ACPI has switched to
acpi_find_rsdp(), sosrat.cmight want to do that too, please check.got it. running a compile and boot test.
hmm, i got another issue while compiling :
CHK include/linux/compile.h UPD include/linux/compile.h CC init/version.o LD init/built-in.o LD .tmp_vmlinux1
arch/i386/kernel/built-in.o: In function `get_memcfg_from_srat':/home/legoater/linux/2.6.20-rc6-mm3/arch/i386/kernel/srat.c:279: undefined reference to `acpi_find_root_pointer'
it seems that drivers/acpi/tables/tbxfroot.c is never compiled ?
Quoted 1 line
I should have the results in 'my' morning (UTC+1).
I'll catchup in the morning.
thanks,
C.
Hi,
I updated patch to use acpi_find_rsdp(), as all other code does. Could you please try it?
Thanks,
Alex.
Quoted 5 lines
-----Original Message-----
From: Cedric Le Goater [mailto:[email protected]]
Sent: Thursday, February 01, 2007 11:39 PM
To: Cedric Le Goater
Cc: Starikovskiy, Alexey Y; Andrew Morton;
Quoted 6 lines
Moore, Robert; keith mannthey
Subject: Re: 2.6.20-rc6-mm3Quoted 2 lines · Cedric Le Goater
Quoted 1 line · Alexey Y
Sorry, here is the patch... ACPI has switched to
acpi_find_rsdp(),
so
Quoted 6 lines
Quoted 3 lines
Quoted 1 line
srat.cmight want to do that too, please check.got it. running a compile and boot test.
hmm, i got another issue while compiling :
Quoted 7 lines
CHK include/linux/compile.h UPD include/linux/compile.h CC init/version.o LD init/built-in.o LD .tmp_vmlinux1
arch/i386/kernel/built-in.o: In function `get_memcfg_from_srat':/home/legoater/linux/2.6.20-rc6-mm3/arch/i386/kernel/srat.c:279:
undefined
Quoted 11 lines
reference to `acpi_find_root_pointer'
it seems that
drivers/acpi/tables/tbxfroot.cis never compiled ?Quoted 1 line
I should have the results in 'my' morning (UTC+1).
I'll catchup in the morning.
thanks,
C.
Make srat.c in i386 compile again.
From: Alexey Starikovskiy <[email protected]>
---
arch/i386/kernel/srat.c | 78 +++++++++++++++++++++++------------------------ 1 files changed, 38 insertions(+), 40 deletions(-)
arch/i386/kernel/srat.c +38 -40
@@ -62,19 +62,19 @@ extern void * boot_ioremap(unsigned long/* Identify CPU proximity domains */ static void __init parse_cpu_affinity_structure (char *p) { -struct acpi_table_processor_affinity *cpu_affinity = - (struct acpi_table_processor_affinity *) p; +struct acpi_srat_cpu_affinity *cpu_affinity = + (struct acpi_srat_cpu_affinity *) p; -if (!cpu_affinity->flags.enabled) +if ((cpu_affinity->flags &ACPI_SRAT_CPU_ENABLED ) ==0 )return ;/* empty entry */ /* mark this node as "seen" in node bitmap */ -BMAP_SET (pxm_bitmap, cpu_affinity->proximity_domain); +BMAP_SET (pxm_bitmap, cpu_affinity->proximity_domain_lo); - apicid_to_pxm[cpu_affinity->apic_id] = cpu_affinity->proximity_domain; + apicid_to_pxm[cpu_affinity->apic_id] = cpu_affinity->proximity_domain_lo;printk ("CPU 0x%02X in proximity domain 0x%02X\n" , - cpu_affinity->apic_id, cpu_affinity->proximity_domain); + cpu_affinity->apic_id, cpu_affinity->proximity_domain_lo); }/*
@@ -87,25 +87,24 @@ static void __init parse_memory_affinityunsigned long start_pfn, end_pfn;u8 pxm;struct node_memory_chunk_s *p, *q, *pend; -struct acpi_table_memory_affinity *memory_affinity = - (struct acpi_table_memory_affinity *) sratp; +struct acpi_srat_mem_affinity *memory_affinity = + (struct acpi_srat_mem_affinity *) sratp; -if (!memory_affinity->flags.enabled) +if ((memory_affinity->flags &ACPI_SRAT_MEM_ENABLED ) ==0 )return ;/* empty entry */ + pxm = memory_affinity->proximity_domain &0xff ; +/* mark this node as "seen" in node bitmap */ -BMAP_SET (pxm_bitmap, memory_affinity->proximity_domain); +BMAP_SET (pxm_bitmap, pxm);/* calculate info for memory chunk structure */ - paddr = memory_affinity->base_addr_hi; - paddr = (paddr <<32 ) | memory_affinity->base_addr_lo; - size = memory_affinity->length_hi; - size = (size <<32 ) | memory_affinity->length_lo; + paddr = memory_affinity->base_address; + size = memory_affinity->length; start_pfn = paddr >>PAGE_SHIFT ; end_pfn = (paddr + size) >>PAGE_SHIFT ; - pxm = memory_affinity->proximity_domain;if (num_memory_chunks >=MAXCHUNKS ) { printk("Too many mem chunks in SRAT. Ignoring %lld MBytes at %llx\n",
@@ -132,8 +131,8 @@ static void __init parse_memory_affinityprintk ("Memory range 0x%lX to 0x%lX (type 0x%X) in proximity domain 0x%02X %s\n" , start_pfn, end_pfn, memory_affinity->memory_type, - memory_affinity->proximity_domain, - (memory_affinity->flags.hot_pluggable ? + pxm, + ((memory_affinity->flags &ACPI_SRAT_MEM_HOT_PLUGGABLE ) ?"enabled and removable" :"enabled" ) ); }
@@ -185,10 +184,10 @@ static int __init acpi20_parse_srat(stru num_memory_chunks =0 ;while (p < end) {switch (*p) { -case ACPI_SRAT_PROCESSOR_AFFINITY : +case ACPI_SRAT_TYPE_CPU_AFFINITY :parse_cpu_affinity_structure (p);break ; -case ACPI_SRAT_MEMORY_AFFINITY : +case ACPI_SRAT_TYPE_MEMORY_AFFINITY :parse_memory_affinity_structure (p);break ;default :
@@ -262,31 +261,30 @@ out_fail:return 0 ; } +struct acpi_static_rsdt { +struct acpi_table_rsdt table; +u32 padding[7 ];/* Allow for 7 more table entries */ +}; +int __init get_memcfg_from_srat (void ) {struct acpi_table_header *header =NULL ;struct acpi_table_rsdp *rsdp =NULL ;struct acpi_table_rsdt *rsdt =NULL ; -struct acpi_pointer *rsdp_address =NULL ; -struct acpi_table_rsdt saved_rsdt; +acpi_native_uint rsdp_address =0 ; +struct acpi_static_rsdt saved_rsdt;int tables =0 ;int i =0 ; -if (ACPI_FAILURE (acpi_find_root_pointer (ACPI_PHYSICAL_ADDRESSING , - rsdp_address))) { + rsdp_address =acpi_find_rsdp (); +if (!rsdp_address) {printk ("%s: System description tables not found\n" , __FUNCTION__); goto out_err; } -if (rsdp_address->pointer_type ==ACPI_PHYSICAL_POINTER ) { -printk ("%s: assigning address to rsdp\n" , __FUNCTION__); - rsdp = (struct acpi_table_rsdp *) - (u32 )rsdp_address->pointer.physical; - }else { -printk ("%s: rsdp_address is not a physical pointer\n" , __FUNCTION__); - goto out_err; - } +printk ("%s: assigning address to rsdp\n" , __FUNCTION__); + rsdp = (struct acpi_table_rsdp *)(u32 )rsdp_address;if (!rsdp) {printk ("%s: Didn't find ACPI root!\n" , __FUNCTION__); goto out_err;
@@ -295,13 +293,13 @@ int __init get_memcfg_from_srat(void)printk (KERN_INFO "%.8s v%d [%.6s]\n" , rsdp->signature, rsdp->revision, rsdp->oem_id); -if (strncmp (rsdp->signature,RSDP_SIG ,strlen (RSDP_SIG ))) { +if (strncmp (rsdp->signature,ACPI_SIG_RSDP ,strlen (ACPI_SIG_RSDP ))) {printk (KERN_WARNING "%s: RSDP table signature incorrect\n" , __FUNCTION__); goto out_err; } rsdt = (struct acpi_table_rsdt *) -boot_ioremap (rsdp->rsdt_address,sizeof (struct acpi_table_rsdt )); +boot_ioremap (rsdp->rsdt_physical_address,sizeof (struct acpi_table_rsdt ));if (!rsdt) { printk(KERN_WARNING
@@ -310,9 +308,9 @@ int __init get_memcfg_from_srat(void) goto out_err; } - header = & rsdt->header; + header = &rsdt->header; -if (strncmp (header->signature,RSDT_SIG ,strlen (RSDT_SIG ))) { +if (strncmp (header->signature,ACPI_SIG_RSDT ,strlen (ACPI_SIG_RSDT ))) {printk (KERN_WARNING "ACPI: RSDT signature incorrect\n" ); goto out_err; }
@@ -330,9 +328,9 @@ int __init get_memcfg_from_srat(void)memcpy (&saved_rsdt, rsdt,sizeof (saved_rsdt)); -if (saved_rsdt.header.length >sizeof (saved_rsdt)) { +if (saved_rsdt.table.header.length >sizeof (saved_rsdt)) {printk (KERN_WARNING "ACPI: Too big length in RSDT: %d\n" , - saved_rsdt.header.length); + saved_rsdt.table.header.length); goto out_err; }
@@ -341,15 +339,15 @@ int __init get_memcfg_from_srat(void)for (i =0 ; i < tables; i++) {/* Map in header, then map in full table length. */ header = (struct acpi_table_header *) -boot_ioremap (saved_rsdt.entry[i],sizeof (struct acpi_table_header )); +boot_ioremap (saved_rsdt.table.table_offset_entry[i],sizeof (struct acpi_table_header ));if (!header)break ; header = (struct acpi_table_header *) -boot_ioremap (saved_rsdt.entry[i], header->length); +boot_ioremap (saved_rsdt.table.table_offset_entry[i], header->length);if (!header)break ; -if (strncmp ((char *) &header->signature,"SRAT" ,4 )) +if (strncmp ((char *) &header->signature,ACPI_SIG_SRAT ,4 ))continue ;/* we've found the srat table. don't need to look at any more tables */
Hello !
Quoted 2 lines · Alexey Y
Hi,
I updated patch to useacpi_find_rsdp(), as all other code does.
so it probably means that drivers/acpi/tables/tbxfroot.c is obsolete ?
Quoted 1 line
Could you please try it?
sure, I'll cancel the current boot test in which I was using acpi_find_root_pointer() in tbxfroot.c and restart one with your new patch. I should have the result today.
Quoted 2 lines
Thanks,
Alex.
Thanks !
C.
Quoted 2 lines
so it probably means that
drivers/acpi/tables/tbxfroot.cis obsolete ?
Yes.
Quoted 6 lines
Quoted 2 lines
Could you please try it?
sure, I'll cancel the current boot test in which I was using
acpi_find_root_pointer()intbxfroot.cand restart one with your new patch. I should have the result today.
How long does it take to boot this thing?
Regards,
Alex.
Quoted 8 lines · Alexey Y
Quoted 2 lines
so it probably means that
drivers/acpi/tables/tbxfroot.cis obsolete ?Yes.
Quoted 4 lines
Quoted 1 line
Could you please try it?
sure, I'll cancel the current boot test in which I was using
acpi_find_root_pointer()intbxfroot.cand restart one with your new patch. I should have the result today.How long does it take to boot this thing?
well, not that long, but i don't have access directly to this machine, only through a test batch manager ...
C.
Quoted 4 lines · Cedric Le Goater
Quoted 3 lines · Alexey Y
Quoted 2 lines
so it probably means that
drivers/acpi/tables/tbxfroot.cis obsolete ?Yes.
Quoted 8 lines
Quoted 5 lines
Quoted 4 lines
Quoted 1 line
Could you please try it?
sure, I'll cancel the current boot test in which I was using
acpi_find_root_pointer()intbxfroot.cand restart one with your new patch. I should have the result today.How long does it take to boot this thing?
well, not that long, but i don't have access directly to this machine, only through a test batch manager ...
dmesg looks fine. However, there is a :
ACPI Warning (tbfadt-0415): Optional field "Gpe1Block" has zero address or length: 0000000000000000/4 [20070126]
but I don't know how to interpret this ? Any Idea ?
thanks,
C.
Linux version 2.6.20-rc6-mm3-lxc2-autokern1 (root@fpos1) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP Fri Feb 2 20:38:46 UTC 2007 BIOS-provided physical RAM map:
sanitize start
sanitize endcopy_e820_map() start: 0000000000000000 size: 000000000009dc00 end: 000000000009dc00 type: 1copy_e820_map() type is E820_RAMcopy_e820_map() start: 000000000009dc00 size: 0000000000002400 end: 00000000000a0000 type: 2copy_e820_map() start: 00000000000e0000 size: 0000000000020000 end: 0000000000100000 type: 2copy_e820_map() start: 0000000000100000 size: 00000000dfea25c0 end: 00000000dffa25c0 type: 1copy_e820_map() type is E820_RAMcopy_e820_map() start: 00000000dffa25c0 size: 0000000000009c80 end: 00000000dffac240 type: 3copy_e820_map() start: 00000000dffac240 size: 0000000000053dc0 end: 00000000e0000000 type: 2copy_e820_map() start: 00000000fec00000 size: 0000000001400000 end: 0000000100000000 type: 2copy_e820_map() start: 0000000100000000 size: 0000000120000000 end: 0000000220000000 type: 1copy_e820_map() type is E820_RAM
BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000dffa25c0 (usable)
BIOS-e820: 00000000dffa25c0 - 00000000dffac240 (ACPI data)
BIOS-e820: 00000000dffac240 - 00000000e0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000220000000 (usable)
Node: 0, start_pfn: 0, end_pfn: 157
Node: 0, start_pfn: 256, end_pfn: 917410
Node: 0, start_pfn: 1048576, end_pfn: 2228224get_memcfg_from_srat: assigning address to rsdp
RSD PTR v0 [IBM ]
Begin SRAT table scan....
CPU 0x00 in proximity domain 0x00
CPU 0x02 in proximity domain 0x00
CPU 0x10 in proximity domain 0x00
CPU 0x12 in proximity domain 0x00
CPU 0x01 in proximity domain 0x00
CPU 0x03 in proximity domain 0x00
CPU 0x11 in proximity domain 0x00
CPU 0x13 in proximity domain 0x00
Memory range 0x0 to 0xE0000 (type 0x1) in proximity domain 0x00 enabled
Memory range 0x100000 to 0x220000 (type 0x1) in proximity domain 0x00 enabled
pxm bitmap: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Number of logical nodes in system = 1
Number of memory chunks in system = 2
chunk 0 nid 0 start_pfn 00000000 end_pfn 000e0000
chunk 1 nid 0 start_pfn 00100000 end_pfn 00220000
Node: 0, start_pfn: 0, end_pfn: 2228224
Reserving 17920 pages of KVA for lmem_map of node 0
Shrinking node 0 from 2228224 pages to 2210304 pages
Reserving total of 17920 pages for numa KVA remapkva_start_pfn ~ 211456 find_max_low_pfn() ~ 229376max_pfn = 2228224
7808MB HIGHMEM available.
896MB LOWMEM available.min_low_pfn = 1156, max_low_pfn = 229376, highstart_pfn = 229376
Low memory ends at vaddr f8000000
node 0 will remap to vaddr f3a00000 - fc600000
High memory starts at vaddr f8000000
found SMP MP-table at 0009dd40
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 2228224
early_node_map[2] active PFN ranges
0: 0 -> 917504
0: 1048576 -> 2210304DMI 2.3 present.
Using APIC driver default
IBM eserver xSeries 440 detected: force use of acpi=ht
ACPI: RSDP @ 0x000fde20/0x0014 (v000 IBM )
ACPI: RSDT @ 0xdffac1c0/0x0034 (v001 IBM SERVIGIL 0x00001000 IBM 0x45444F43)
ACPI: FACP @ 0xdffac140/0x0074 (v001 IBM SERVIGIL 0x00001000 IBM 0x45444F43)
ACPI Warning (tbfadt-0415): Optional field "Gpe1Block" has zero address or length: 0000000000000000/4 [20070126]
ACPI: DSDT @ 0xdffa25c0/0x4436 (v001 IBM SERVIGIL 0x00001000 INTL 0x02002025)
ACPI: FACS @ 0xdffabf00/0x0040
ACPI: APIC @ 0xdffac040/0x00D2 (v001 IBM SERVIGIL 0x00001000 IBM 0x45444F43)
ACPI: SRAT @ 0xdffabf40/0x0100 (v001 IBM SERVIGIL 0x00001000 IBM 0x45444F43)
ACPI: SSDT @ 0xdffa6a00/0x5467 (v001 IBM VIGSSDT0 0x00001000 INTL 0x02002025)
ACPI: PM-Timer IO Port: 0x508
Switched to APIC driver `summit'.
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:1 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
Processor #2 15:1 APIC version 20
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] enabled)
Processor #16 15:1 APIC version 20
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x12] enabled)
Processor #18 15:1 APIC version 20
ACPI: LAPIC (acpi_id[0x80] lapic_id[0x01] enabled)
Processor #1 15:1 APIC version 20
ACPI: LAPIC (acpi_id[0x81] lapic_id[0x03] enabled)
Processor #3 15:1 APIC version 20
ACPI: LAPIC (acpi_id[0x84] lapic_id[0x11] enabled)
Processor #17 15:1 APIC version 20
ACPI: LAPIC (acpi_id[0x85] lapic_id[0x13] enabled)
Processor #19 15:1 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x80] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x81] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x84] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x85] dfl dfl lint[0x1])
Using ACPI for processor (LAPIC) configuration information
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: IBM ENSW Product ID: VIGIL SMP <6>Switched to APIC driver `summit'.
APIC at: 0xFEE00000
I/O APIC #14 Version 17 at 0xFEC00000.
I/O APIC #13 Version 17 at 0xFEC01000.
Enabling APIC mode: Summit. Using 2 I/O APICs
Processors: 8
Allocating PCI resources starting at e2000000 (gap: e0000000:1ec00000)
Detected 1397.332 MHz processor.
Built 1 zonelists. Total pages: 2061964
Kernel command line: console=tty0 console=ttyS0,57600 ro autobench_args: root=/dev/sda2 ABAT:1170448788 Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x25
------------------------
| Locking API testsuite:
----------------------------------------------------------------------------
| spin |wlock |rlock |mutex | wsem | rsem |
--------------------------------------------------------------------------
A-A deadlock:failed|failed| ok |failed|failed|failed|
A-B-B-A deadlock:failed|failed| ok |failed|failed|failed|
A-B-B-C-C-A deadlock:failed|failed| ok |failed|failed|failed|
A-B-C-A-B-C deadlock:failed|failed| ok |failed|failed|failed|
A-B-B-C-C-D-D-A deadlock:failed|failed| ok |failed|failed|failed|
A-B-C-D-B-D-D-A deadlock:failed|failed| ok |failed|failed|failed|
A-B-C-D-B-C-D-A deadlock:failed|failed| ok |failed|failed|failed|
double unlock:failed|failed|failed| ok |failed|failed|
initialize held:failed|failed|failed|failed|failed|failed|
bad unlock order: ok | ok | ok | ok | ok | ok |
--------------------------------------------------------------------------
recursive read-lock: | ok | |failed|
recursive read-lock #2: | ok | |failed|
mixed read-write-lock: |failed| |failed|
mixed write-read-lock: |failed| |failed|
--------------------------------------------------------------------------
hard-irqs-on + irq-safe-A/12:failed|failed| ok |
soft-irqs-on + irq-safe-A/12:failed|failed| ok |
hard-irqs-on + irq-safe-A/21:failed|failed| ok |
soft-irqs-on + irq-safe-A/21:failed|failed| ok |
sirq-safe-A => hirqs-on/12:failed|failed| ok |
sirq-safe-A => hirqs-on/21:failed|failed| ok |
hard-safe-A + irqs-on/12:failed|failed| ok |
soft-safe-A + irqs-on/12:failed|failed| ok |
hard-safe-A + irqs-on/21:failed|failed| ok |
soft-safe-A + irqs-on/21:failed|failed| ok |
hard-safe-A + unsafe-B #1/123:failed|failed| ok |
soft-safe-A + unsafe-B #1/123:failed|failed| ok |
hard-safe-A + unsafe-B #1/132:failed|failed| ok |
soft-safe-A + unsafe-B #1/132:failed|failed| ok |
hard-safe-A + unsafe-B #1/213:failed|failed| ok |
soft-safe-A + unsafe-B #1/213:failed|failed| ok |
hard-safe-A + unsafe-B #1/231:failed|failed| ok |
soft-safe-A + unsafe-B #1/231:failed|failed| ok |
hard-safe-A + unsafe-B #1/312:failed|failed| ok |
soft-safe-A + unsafe-B #1/312:failed|failed| ok |
hard-safe-A + unsafe-B #1/321:failed|failed| ok |
soft-safe-A + unsafe-B #1/321:failed|failed| ok |
hard-safe-A + unsafe-B #2/123:failed|failed| ok |
soft-safe-A + unsafe-B #2/123:failed|failed| ok |
hard-safe-A + unsafe-B #2/132:failed|failed| ok |
soft-safe-A + unsafe-B #2/132:failed|failed| ok |
hard-safe-A + unsafe-B #2/213:failed|failed| ok |
soft-safe-A + unsafe-B #2/213:failed|failed| ok |
hard-safe-A + unsafe-B #2/231:failed|failed| ok |
soft-safe-A + unsafe-B #2/231:failed|failed| ok |
hard-safe-A + unsafe-B #2/312:failed|failed| ok |
soft-safe-A + unsafe-B #2/312:failed|failed| ok |
hard-safe-A + unsafe-B #2/321:failed|failed| ok |
soft-safe-A + unsafe-B #2/321:failed|failed| ok |
hard-irq lock-inversion/123:failed|failed| ok |
soft-irq lock-inversion/123:failed|failed| ok |
hard-irq lock-inversion/132:failed|failed| ok |
soft-irq lock-inversion/132:failed|failed| ok |
hard-irq lock-inversion/213:failed|failed| ok |
soft-irq lock-inversion/213:failed|failed| ok |
hard-irq lock-inversion/231:failed|failed| ok |
soft-irq lock-inversion/231:failed|failed| ok |
hard-irq lock-inversion/312:failed|failed| ok |
soft-irq lock-inversion/312:failed|failed| ok |
hard-irq lock-inversion/321:failed|failed| ok |
soft-irq lock-inversion/321:failed|failed| ok |
hard-irq read-recursion/123: ok |
soft-irq read-recursion/123: ok |
hard-irq read-recursion/132: ok |
soft-irq read-recursion/132: ok |
hard-irq read-recursion/213: ok |
soft-irq read-recursion/213: ok |
hard-irq read-recursion/231: ok |
soft-irq read-recursion/231: ok |
hard-irq read-recursion/312: ok |
soft-irq read-recursion/312: ok |
hard-irq read-recursion/321: ok |
soft-irq read-recursion/321: ok |--------------------------------------------------------
144 out of 218 testcases failed, as expected. |
----------------------------------------------------
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing HighMem for node 0 (00038000:0021ba00)
Memory: 8239724k/8912896k available (2098k kernel code, 76432k reserved, 968k data, 228k init, 7399048k highmem) virtual kernel memory layout:
fixmap : 0xffc56000 - 0xfffff000 (3748 kB)
pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
vmalloc : 0xf8800000 - 0xff9fe000 ( 113 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc0406000 - 0xc043f000 ( 228 kB)
.data : 0xc030cb21 - 0xc03fee28 ( 968 kB)
.text : 0xc0100000 - 0xc030cb21 (2098 kB)Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 2800.13 BogoMIPS (lpj=5600271)
Mount-cache hash table entries: 512
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 256K
CPU: L3 cache: 512K
CPU: Physical Processor ID: 0
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 15k freed
CPU0: Intel(R) Xeon(TM) CPU 1.40GHz stepping 01
Leaving ESR disabled.
Mapping cpu 0 to node 0
Booting processor 1/2 eip 2000
Initializing CPU#1
Leaving ESR disabled.
Mapping cpu 1 to node 0
Calibrating delay using timer specific routine.. 2794.79 BogoMIPS (lpj=5589582)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 256K
CPU: L3 cache: 512K
CPU: Physical Processor ID: 1
CPU1: Intel(R) Xeon(TM) CPU 1.40GHz stepping 01
Booting processor 2/16 eip 2000
Initializing CPU#2
Leaving ESR disabled.
Mapping cpu 2 to node 0
Calibrating delay using timer specific routine.. 2794.70 BogoMIPS (lpj=5589416)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 256K
CPU: L3 cache: 512K
CPU: Physical Processor ID: 8
CPU2: Intel(R) Xeon(TM) CPU 1.40GHz stepping 01
Booting processor 3/18 eip 2000
Initializing CPU#3
Leaving ESR disabled.
Mapping cpu 3 to node 0
Calibrating delay using timer specific routine.. 2794.72 BogoMIPS (lpj=5589444)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 256K
CPU: L3 cache: 512K
CPU: Physical Processor ID: 9
CPU3: Intel(R) Xeon(TM) CPU 1.40GHz stepping 01
Booting processor 4/1 eip 2000
Initializing CPU#4
Leaving ESR disabled.
Mapping cpu 4 to node 0
Calibrating delay using timer specific routine.. 2794.60 BogoMIPS (lpj=5589208)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 256K
CPU: L3 cache: 512K
CPU: Physical Processor ID: 0
CPU4: Intel(R) Xeon(TM) CPU 1.40GHz stepping 01
Booting processor 5/3 eip 2000
Initializing CPU#5
Leaving ESR disabled.
Mapping cpu 5 to node 0
Calibrating delay using timer specific routine.. 2794.68 BogoMIPS (lpj=5589369)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 256K
CPU: L3 cache: 512K
CPU: Physical Processor ID: 1
CPU5: Intel(R) Xeon(TM) CPU 1.40GHz stepping 01
Booting processor 6/17 eip 2000
Initializing CPU#6
Leaving ESR disabled.
Mapping cpu 6 to node 0
Calibrating delay using timer specific routine.. 2794.59 BogoMIPS (lpj=5589194)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 256K
CPU: L3 cache: 512K
CPU: Physical Processor ID: 8
CPU6: Intel(R) Xeon(TM) CPU 1.40GHz stepping 01
Booting processor 7/19 eip 2000
Initializing CPU#7
Leaving ESR disabled.
Mapping cpu 7 to node 0
Calibrating delay using timer specific routine.. 2794.56 BogoMIPS (lpj=5589132)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 256K
CPU: L3 cache: 512K
CPU: Physical Processor ID: 9
CPU7: Intel(R) Xeon(TM) CPU 1.40GHz stepping 01
Total of 8 processors activated (22362.80 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
Brought up 8 CPUs
migration_cost=60,306
NET: Registered protocol family 16
ACPI Exception (utmutex-0263): AE_BAD_PARAMETER, Thread C1139AA0 could not acquire Mutex [1] [20070126] No dock devices found.
PCI: PCI BIOS revision 2.10 entry at 0xfd5bd, last bus=11
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter disabled.
SCSI subsystem initialized
PCI: Probing PCI hardware
PCI quirk: region 0440-044f claimed by vt82c686 SMB
PCI: Discovered peer bus 01
PCI: Discovered peer bus 02
PCI: Discovered peer bus 05
PCI: Discovered peer bus 07
PCI: Discovered peer bus 09PCI->APIC IRQ transform: 0000:00:03.0[A] -> IRQ 39PCI->APIC IRQ transform: 0000:00:04.0[A] -> IRQ 16PCI->APIC IRQ transform: 0000:00:05.2[D] -> IRQ 47PCI->APIC IRQ transform: 0000:00:05.3[D] -> IRQ 47PCI->APIC IRQ transform: 0000:01:03.0[A] -> IRQ 40PCI->APIC IRQ transform: 0000:01:03.1[B] -> IRQ 41PCI->APIC IRQ transform: 0000:01:04.0[A] -> IRQ 42
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
IBM machine detected. Enabling interrupts during APM calls.
apm: BIOS not found.
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
Installing knfsd (copyright (C) 1996 [email protected]).
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
PCI: Enabling Via external APIC routing
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
loop: loaded (max 8 devices)
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
Copyright (c) 1999-2006 Intel Corporation.
pcnet32.c:v1.33 27.Jun.2006 [email protected]
tg3.c:v3.72 (January 8, 2007)
eth0: Tigon3 [partno(BCM95700A6) rev 7102 PHY(5401)] (PCI:66MHz:64-bit) 10/100/1000Base-T Ethernet 00:02:55:dc:36:33
eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[0] TSOcap[0]
eth0: dma_rwctrl[76ff000f] dma_mask[64-bit]
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
<Adaptec aic7899 Ultra160 SCSI adapter>
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
<Adaptec aic7899 Ultra160 SCSI adapter>
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
scsi 1:0:9:0: Processor IBM GNHv1 S2 0 PQ: 0 ANSI: 2
target1:0:9: Beginning Domain Validation
target1:0:9: Ending Domain Validation
scsi 1:0:12:0: Direct-Access IBM-ESXS ST336607LC F B25J PQ: 0 ANSI: 3
scsi1:A:12:0: Tagged Queuing enabled. Depth 253
target1:0:12: Beginning Domain Validation
target1:0:12: wide asynchronous
target1:0:12: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 63) target1:0:12: Ending Domain Validation
scsi 1:0:13:0: Direct-Access IBM-ESXS DTN036C1UCDY10F S29C PQ: 0 ANSI: 3
scsi1:A:13:0: Tagged Queuing enabled. Depth 253
target1:0:13: Beginning Domain Validation
target1:0:13: wide asynchronous
target1:0:13: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127) target1:0:13: Ending Domain Validation
st: Version 20061107, fixed bufsize 32768, s/g segs 256
SCSI device sda: 71096640 512-byte hdwr sectors (36401 MB)
sda: Write Protect is off
SCSI device sda: write cache: disabled, read cache: enabled, supports DPO and FUA SCSI device sda: 71096640 512-byte hdwr sectors (36401 MB)
sda: Write Protect is off
SCSI device sda: write cache: disabled, read cache: enabled, supports DPO and FUA
sda: sda1 sda2 sda3
sd 1:0:12:0: Attached scsi disk sda
SCSI device sdb: 71096640 512-byte hdwr sectors (36401 MB)
sdb: Write Protect is off
SCSI device sdb: write cache: disabled, read cache: enabled, doesn't support DPO or FUA SCSI device sdb: 71096640 512-byte hdwr sectors (36401 MB)
sdb: Write Protect is off
SCSI device sdb: write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 sdb3 sdb4
sd 1:0:13:0: Attached scsi disk sdb
scsi 1:0:9:0: Attached scsi generic sg0 type 3
sd 1:0:12:0: Attached scsi generic sg1 type 0
sd 1:0:13:0: Attached scsi generic sg2 type 0
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input0
Summit chipset: Starting Cyclone Counter.
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Starting balanced_irq
Using IPI Shortcut mode
Time: cyclone clocksource has been installed.
logips2pp: Detected unknown logitech mouse model 0
input: PS/2 Logitech Mouse as /class/input/input1
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
This warning should probably be disabled, to not confuse users... Spec says that some registers are optional, and ACPICA used to keep silence then it encountered one, but now it produces this meaningless warning... Ignore it...
Regards,
Alex.
Quoted 5 lines
-----Original Message-----
From: Cedric Le Goater [mailto:[email protected]]
Sent: Saturday, February 03, 2007 10:30 AM
To: Cedric Le Goater
Cc: Starikovskiy, Alexey Y; Andrew Morton;
Quoted 12 lines
Moore, Robert; keith mannthey
Subject: Re: 2.6.20-rc6-mm3Quoted 8 lines · Cedric Le Goater
Quoted 7 lines · Alexey Y
Quoted 2 lines
so it probably means that
drivers/acpi/tables/tbxfroot.cis obsolete ?Yes.
Quoted 4 lines
Quoted 1 line
Could you please try it?
sure, I'll cancel the current boot test in which I was using
acpi_find_root_pointer()intbxfroot.cand restart one with your new patch. I should have the result today.
Quoted 8 lines
Quoted 4 lines
Quoted 1 line
How long does it take to boot this thing?
well, not that long, but i don't have access directly to this machine, only through a test batch manager ...
dmesg looks fine. However, there is a :
ACPI Warning (tbfadt-0415): Optional field "Gpe1Block" has zero address
or
Quoted 11 lines
length: 0000000000000000/4 [20070126]
but I don't know how to interpret this ? Any Idea ?
thanks,
C.
Linux version 2.6.20-rc6-mm3-lxc2-autokern1 (root@fpos1) (gcc version
4.0.3
Quoted 41 lines
(Ubuntu 4.0.3-1ubuntu5)) #1 SMP Fri Feb 2 20:38:46 UTC 2007 BIOS-provided physical RAM map:
sanitize start
sanitize endcopy_e820_map()start: 0000000000000000 size:000000000009dc00end:000000000009dc00type: 1copy_e820_map()type isE820_RAMcopy_e820_map()start:000000000009dc00size: 0000000000002400 end:00000000000a0000type: 2copy_e820_map()start:00000000000e0000size: 0000000000020000 end:
0000000000100000 type: 2copy_e820_map()start: 0000000000100000 size:00000000dfea25c0end:00000000dffa25c0type: 1copy_e820_map()type isE820_RAMcopy_e820_map()start:00000000dffa25c0size:0000000000009c80end:00000000dffac240type: 3copy_e820_map()start:00000000dffac240size:0000000000053dc0end:00000000e0000000type: 2copy_e820_map()start:00000000fec00000size: 0000000001400000 end:
0000000100000000 type: 2copy_e820_map()start: 0000000100000000 size: 0000000120000000 end:
0000000220000000 type: 1copy_e820_map()type isE820_RAM
BIOS-e820: 0000000000000000 -000000000009dc00(usable)
BIOS-e820:000000000009dc00-00000000000a0000(reserved)
BIOS-e820:00000000000e0000- 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 -00000000dffa25c0(usable)
BIOS-e820:00000000dffa25c0-00000000dffac240(ACPI data)
BIOS-e820:00000000dffac240-00000000e0000000(reserved)
BIOS-e820:00000000fec00000- 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000220000000 (usable)
Node: 0,start_pfn: 0,end_pfn: 157
Node: 0,start_pfn: 256,end_pfn: 917410
Node: 0,start_pfn: 1048576,end_pfn: 2228224get_memcfg_from_srat: assigning address to rsdp
RSD PTR v0 [IBM ]
Begin SRAT table scan....
CPU0x00in proximity domain0x00
CPU0x02in proximity domain0x00
CPU0x10in proximity domain0x00
CPU0x12in proximity domain0x00
Quoted 8 lines
CPU
0x01in proximity domain0x00
CPU0x03in proximity domain0x00
CPU0x11in proximity domain0x00
CPU0x13in proximity domain0x00
Memory range0x0to0xE0000(type0x1) in proximity domain0x00enabled Memory range0x100000to0x220000(type0x1) in proximity domain0x00enabled
pxm bitmap: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00
Quoted 26 lines
00 00 00 00 00 00 00 00 00 00 00
Number of logical nodes in system = 1
Number of memory chunks in system = 2
chunk 0 nid 0start_pfn00000000end_pfn000e0000chunk 1 nid 0start_pfn00100000end_pfn00220000
Node: 0,start_pfn: 0,end_pfn: 2228224
Reserving 17920 pages of KVA forlmem_mapof node 0 Shrinking node 0 from 2228224 pages to 2210304 pages Reserving total of 17920 pages for numa KVA remapkva_start_pfn~ 211456find_max_low_pfn()~ 229376max_pfn= 2228224
7808MB HIGHMEM available.
896MB LOWMEM available.min_low_pfn= 1156,max_low_pfn= 229376,highstart_pfn= 229376 Low memory ends at vaddrf8000000
node 0 will remap to vaddrf3a00000-fc600000
High memory starts at vaddrf8000000
found SMP MP-table at0009dd40
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 2228224
early_node_map[2] active PFN ranges
0: 0 -> 917504
0: 1048576 -> 2210304
DMI 2.3 present.
Quoted 8 lines
Using APIC driver default
IBM eserver xSeries 440 detected: force use of acpi=ht
ACPI: RSDP @ 0x000fde20/0x0014 (v000 IBM )
ACPI: RSDT @ 0xdffac1c0/0x0034 (v001 IBM SERVIGIL0x00001000IBM0x45444F43)
ACPI: FACP @ 0xdffac140/0x0074 (v001 IBM SERVIGIL0x00001000IBM0x45444F43)
ACPI Warning (tbfadt-0415): Optional field "Gpe1Block" has zero address
or
Quoted 42 lines
length: 0000000000000000/4 [20070126]
ACPI: DSDT @ 0xdffa25c0/0x4436 (v001 IBM SERVIGIL0x00001000INTL0x02002025)
ACPI: FACS @ 0xdffabf00/0x0040
ACPI: APIC @ 0xdffac040/0x00D2 (v001 IBM SERVIGIL0x00001000IBM0x45444F43)
ACPI: SRAT @ 0xdffabf40/0x0100 (v001 IBM SERVIGIL0x00001000IBM0x45444F43)
ACPI: SSDT @ 0xdffa6a00/0x5467 (v001 IBM VIGSSDT00x00001000INTL0x02002025)
ACPI: PM-Timer IO Port:0x508
Switched to APIC driver `summit'.
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:1 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) Processor #2 15:1 APIC version 20
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] enabled) Processor #16 15:1 APIC version 20
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x12] enabled) Processor #18 15:1 APIC version 20
ACPI: LAPIC (acpi_id[0x80] lapic_id[0x01] enabled) Processor #1 15:1 APIC version 20
ACPI: LAPIC (acpi_id[0x81] lapic_id[0x03] enabled) Processor #3 15:1 APIC version 20
ACPI: LAPIC (acpi_id[0x84] lapic_id[0x11] enabled) Processor #17 15:1 APIC version 20
ACPI: LAPIC (acpi_id[0x85] lapic_id[0x13] enabled) Processor #19 15:1 APIC version 20
ACPI:LAPIC_NMI(acpi_id[0x00] dfl dfl lint[0x1])
ACPI:LAPIC_NMI(acpi_id[0x01] dfl dfl lint[0x1])
ACPI:LAPIC_NMI(acpi_id[0x04] dfl dfl lint[0x1])
ACPI:LAPIC_NMI(acpi_id[0x05] dfl dfl lint[0x1])
ACPI:LAPIC_NMI(acpi_id[0x80] dfl dfl lint[0x1])
ACPI:LAPIC_NMI(acpi_id[0x81] dfl dfl lint[0x1])
ACPI:LAPIC_NMI(acpi_id[0x84] dfl dfl lint[0x1])
ACPI:LAPIC_NMI(acpi_id[0x85] dfl dfl lint[0x1]) Using ACPI for processor (LAPIC) configuration information Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: IBM ENSW Product ID: VIGIL SMP <6>Switched to APIC driver
`summit'.
APIC at:0xFEE00000
Quoted 8 lines
I/O APIC #14 Version 17 at
0xFEC00000.
I/O APIC #13 Version 17 at0xFEC01000.
Enabling APIC mode: Summit. Using 2 I/O APICs
Processors: 8
Allocating PCI resources starting ate2000000(gap: e0000000:1ec00000) Detected 1397.332 MHz processor.
Built 1 zonelists. Total pages: 2061964
Kernel command line: console=tty0 console=ttyS0,57600 ro
autobench_args:
Quoted 9 lines
root=/dev/sda2 ABAT:1170448788
Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x25
------------------------
| Locking API testsuite:
-----------------------------------------------------------------------
----
Quoted 2 lines
-
| spin |wlock |rlock |mutex | wsem |
rsem
Quoted 2 lines
|
------------------------------------------------------------------------
-
Quoted 12 lines
-
A-A deadlock:failed|failed| ok|failed|failed|failed| A-B-B-A deadlock:failed|failed| ok |failed|failed|failed| A-B-B-C-C-A deadlock:failed|failed| ok |failed|failed|failed| A-B-C-A-B-C deadlock:failed|failed| ok |failed|failed|failed| A-B-B-C-C-D-D-A deadlock:failed|failed| ok |failed|failed|failed| A-B-C-D-B-D-D-A deadlock:failed|failed| ok
Quoted 8 lines
|failed|failed|failed|
A-B-C-D-B-C-D-A deadlock:failed|failed| ok
|failed|failed|failed|
double unlock:failed|failed|failed| ok
|failed|failed|
initialize
held:failed|failed|failed|failed|failed|failed|
bad unlock order: ok | ok | ok | ok | ok |ok
Quoted 2 lines
|
------------------------------------------------------------------------
-
Quoted 10 lines
-
recursive read-lock: | ok ||failed| recursive read-lock #2: | ok | |failed| mixed read-write-lock: |failed| |failed| mixed write-read-lock: |failed| |failed|
------------------------------------------------------------------------
-
Quoted 59 lines
-
hard-irqs-on + irq-safe-A/12:failed|failed| ok | soft-irqs-on + irq-safe-A/12:failed|failed| ok | hard-irqs-on + irq-safe-A/21:failed|failed| ok | soft-irqs-on + irq-safe-A/21:failed|failed| ok | sirq-safe-A => hirqs-on/12:failed|failed| ok | sirq-safe-A => hirqs-on/21:failed|failed| ok | hard-safe-A + irqs-on/12:failed|failed| ok | soft-safe-A + irqs-on/12:failed|failed| ok | hard-safe-A + irqs-on/21:failed|failed| ok | soft-safe-A + irqs-on/21:failed|failed| ok | hard-safe-A + unsafe-B #1/123:failed|failed| ok | soft-safe-A + unsafe-B #1/123:failed|failed| ok | hard-safe-A + unsafe-B #1/132:failed|failed| ok | soft-safe-A + unsafe-B #1/132:failed|failed| ok | hard-safe-A + unsafe-B #1/213:failed|failed| ok | soft-safe-A + unsafe-B #1/213:failed|failed| ok | hard-safe-A + unsafe-B #1/231:failed|failed| ok | soft-safe-A + unsafe-B #1/231:failed|failed| ok | hard-safe-A + unsafe-B #1/312:failed|failed| ok | soft-safe-A + unsafe-B #1/312:failed|failed| ok | hard-safe-A + unsafe-B #1/321:failed|failed| ok | soft-safe-A + unsafe-B #1/321:failed|failed| ok | hard-safe-A + unsafe-B #2/123:failed|failed| ok | soft-safe-A + unsafe-B #2/123:failed|failed| ok | hard-safe-A + unsafe-B #2/132:failed|failed| ok | soft-safe-A + unsafe-B #2/132:failed|failed| ok | hard-safe-A + unsafe-B #2/213:failed|failed| ok | soft-safe-A + unsafe-B #2/213:failed|failed| ok | hard-safe-A + unsafe-B #2/231:failed|failed| ok | soft-safe-A + unsafe-B #2/231:failed|failed| ok | hard-safe-A + unsafe-B #2/312:failed|failed| ok | soft-safe-A + unsafe-B #2/312:failed|failed| ok | hard-safe-A + unsafe-B #2/321:failed|failed| ok | soft-safe-A + unsafe-B #2/321:failed|failed| ok | hard-irq lock-inversion/123:failed|failed| ok | soft-irq lock-inversion/123:failed|failed| ok | hard-irq lock-inversion/132:failed|failed| ok | soft-irq lock-inversion/132:failed|failed| ok | hard-irq lock-inversion/213:failed|failed| ok | soft-irq lock-inversion/213:failed|failed| ok | hard-irq lock-inversion/231:failed|failed| ok | soft-irq lock-inversion/231:failed|failed| ok | hard-irq lock-inversion/312:failed|failed| ok | soft-irq lock-inversion/312:failed|failed| ok | hard-irq lock-inversion/321:failed|failed| ok | soft-irq lock-inversion/321:failed|failed| ok | hard-irq read-recursion/123: ok | soft-irq read-recursion/123: ok | hard-irq read-recursion/132: ok | soft-irq read-recursion/132: ok | hard-irq read-recursion/213: ok | soft-irq read-recursion/213: ok | hard-irq read-recursion/231: ok | soft-irq read-recursion/231: ok | hard-irq read-recursion/312: ok | soft-irq read-recursion/312: ok | hard-irq read-recursion/321: ok | soft-irq read-recursion/321: ok |
Quoted 7 lines
--------------------------------------------------------
144 out of 218 testcases failed, as expected. |
----------------------------------------------------
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Initializing HighMem for node 0 (00038000:0021ba00)
Memory: 8239724k/8912896k available (2098k kernel code, 76432k
reserved,
Quoted 10 lines
968k data, 228k init, 7399048k highmem)
virtual kernel memory layout:fixmap : 0xffc56000 - 0xfffff000 (3748 kB) pkmap : 0xffa00000 - 0xffc00000 (2048 kB) vmalloc : 0xf8800000 - 0xff9fe000 ( 113 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc0406000 - 0xc043f000 ( 228 kB) .data : 0xc030cb21 - 0xc03fee28 ( 968 kB) .text : 0xc0100000 - 0xc030cb21 (2098 kB)Checking if this processor honours the WP bit even in supervisor
mode...
Quoted 90 lines
Ok.
Calibrating delay using timer specific routine.. 2800.13 BogoMIPS (lpj=5600271)
Mount-cache hash table entries: 512
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 256K
CPU: L3 cache: 512K
CPU: Physical Processor ID: 0
Compat vDSO mapped toffffe000.
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 15k freed
CPU0: Intel(R) Xeon(TM) CPU 1.40GHz stepping 01
Leaving ESR disabled.
Mapping cpu 0 to node 0
Booting processor 1/2 eip 2000
Initializing CPU#1
Leaving ESR disabled.
Mapping cpu 1 to node 0
Calibrating delay using timer specific routine.. 2794.79 BogoMIPS (lpj=5589582)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 256K
CPU: L3 cache: 512K
CPU: Physical Processor ID: 1
CPU1: Intel(R) Xeon(TM) CPU 1.40GHz stepping 01
Booting processor 2/16 eip 2000
Initializing CPU#2
Leaving ESR disabled.
Mapping cpu 2 to node 0
Calibrating delay using timer specific routine.. 2794.70 BogoMIPS (lpj=5589416)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 256K
CPU: L3 cache: 512K
CPU: Physical Processor ID: 8
CPU2: Intel(R) Xeon(TM) CPU 1.40GHz stepping 01
Booting processor 3/18 eip 2000
Initializing CPU#3
Leaving ESR disabled.
Mapping cpu 3 to node 0
Calibrating delay using timer specific routine.. 2794.72 BogoMIPS (lpj=5589444)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 256K
CPU: L3 cache: 512K
CPU: Physical Processor ID: 9
CPU3: Intel(R) Xeon(TM) CPU 1.40GHz stepping 01
Booting processor 4/1 eip 2000
Initializing CPU#4
Leaving ESR disabled.
Mapping cpu 4 to node 0
Calibrating delay using timer specific routine.. 2794.60 BogoMIPS (lpj=5589208)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 256K
CPU: L3 cache: 512K
CPU: Physical Processor ID: 0
CPU4: Intel(R) Xeon(TM) CPU 1.40GHz stepping 01
Booting processor 5/3 eip 2000
Initializing CPU#5
Leaving ESR disabled.
Mapping cpu 5 to node 0
Calibrating delay using timer specific routine.. 2794.68 BogoMIPS (lpj=5589369)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 256K
CPU: L3 cache: 512K
CPU: Physical Processor ID: 1
CPU5: Intel(R) Xeon(TM) CPU 1.40GHz stepping 01
Booting processor 6/17 eip 2000
Initializing CPU#6
Leaving ESR disabled.
Mapping cpu 6 to node 0
Calibrating delay using timer specific routine.. 2794.59 BogoMIPS (lpj=5589194)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 256K
CPU: L3 cache: 512K
CPU: Physical Processor ID: 8
CPU6: Intel(R) Xeon(TM) CPU 1.40GHz stepping 01
Booting processor 7/19 eip 2000
Initializing CPU#7
Leaving ESR disabled.
Mapping cpu 7 to node 0
Calibrating delay using timer specific routine.. 2794.56 BogoMIPS (lpj=5589132)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 256K
CPU: L3 cache: 512K
CPU: Physical Processor ID: 9
Quoted 8 lines
CPU7: Intel(R) Xeon(TM) CPU 1.40GHz stepping 01
Total of 8 processors activated (22362.80 BogoMIPS). ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 Brought up 8 CPUs
migration_cost=60,306
NET: Registered protocol family 16
ACPI Exception (utmutex-0263):AE_BAD_PARAMETER, Thread C1139AA0 could
not
Quoted 30 lines
acquire Mutex [1] [20070126]
No dock devices found.
PCI: PCI BIOS revision 2.10 entry at0xfd5bd, last bus=11
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter disabled.
SCSI subsystem initialized
PCI: Probing PCI hardware
PCI quirk: region 0440-044f claimed by vt82c686 SMB
PCI: Discovered peer bus 01
PCI: Discovered peer bus 02
PCI: Discovered peer bus 05
PCI: Discovered peer bus 07
PCI: Discovered peer bus 09PCI->APICIRQ transform: 0000:00:03.0[A] -> IRQ 39PCI->APICIRQ transform: 0000:00:04.0[A] -> IRQ 16PCI->APICIRQ transform: 0000:00:05.2[D] -> IRQ 47PCI->APICIRQ transform: 0000:00:05.3[D] -> IRQ 47PCI->APICIRQ transform: 0000:01:03.0[A] -> IRQ 40PCI->APICIRQ transform: 0000:01:03.1[B] -> IRQ 41PCI->APICIRQ transform: 0000:01:04.0[A] -> IRQ 42
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered
IBM machine detected. Enabling interrupts during APM calls.
apm: BIOS not found.
highmem bounce pool size: 64 pages
Quoted 8 lines
Total HugeTLB memory allocated, 0
Installing knfsd (copyright (C) 1996 [email protected]). io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
PCI: Enabling Via external APIC routing
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
disabled
Quoted 15 lines
serial8250: ttyS0 at I/O
0x3f8(irq = 4) is a 16550A
loop: loaded (max 8 devices)
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2 Copyright (c) 1999-2006 Intel Corporation.
pcnet32.c:v1.33 27.Jun.2006 [email protected] tg3.c:v3.72 (January 8, 2007)
eth0: Tigon3 [partno(BCM95700A6) rev 7102 PHY(5401)] (PCI:66MHz:64-bit) 10/100/1000Base-T Ethernet 00:02:55:dc:36:33
eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[0] TSOcap[0]
eth0: dma_rwctrl[76ff000f] dma_mask[64-bit]
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
<Adaptec aic7899 Ultra160 SCSI adapter>
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
Quoted 5 lines
scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
<Adaptec aic7899 Ultra160 SCSI adapter>
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBsscsi 1:0:9:0: Processor IBM GNHv1 S2 0 PQ: 0
ANSI:
Quoted 4 lines
2
target1:0:9: Beginning Domain Validation
target1:0:9: Ending Domain Validation
scsi 1:0:12:0: Direct-Access IBM-ESXS ST336607LC F B25J PQ: 0
ANSI:
Quoted 7 lines
3
scsi1:A:12:0: Tagged Queuing enabled. Depth 253 target1:0:12: Beginning Domain Validation
target1:0:12: wide asynchronous
target1:0:12: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 63) target1:0:12: Ending Domain Validation
scsi 1:0:13:0: Direct-Access IBM-ESXS DTN036C1UCDY10F S29C PQ: 0
ANSI:
Quoted 10 lines
3
scsi1:A:13:0: Tagged Queuing enabled. Depth 253 target1:0:13: Beginning Domain Validation
target1:0:13: wide asynchronous
target1:0:13: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127) target1:0:13: Ending Domain Validation
st: Version 20061107, fixed bufsize 32768, s/g segs 256 SCSI device sda: 71096640 512-byte hdwr sectors (36401 MB)
sda: Write Protect is off
SCSI device sda: write cache: disabled, read cache: enabled, supports
DPO
Quoted 4 lines
and FUA
SCSI device sda: 71096640 512-byte hdwr sectors (36401 MB)
sda: Write Protect is off
SCSI device sda: write cache: disabled, read cache: enabled, supports
DPO
Quoted 32 lines
and FUA
sda: sda1 sda2 sda3
sd 1:0:12:0: Attached scsi disk sda
SCSI device sdb: 71096640 512-byte hdwr sectors (36401 MB)
sdb: Write Protect is off
SCSI device sdb: write cache: disabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sdb: 71096640 512-byte hdwr sectors (36401 MB)
sdb: Write Protect is off
SCSI device sdb: write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 sdb3 sdb4
sd 1:0:13:0: Attached scsi disk sdb
scsi 1:0:9:0: Attached scsi generic sg0 type 3
sd 1:0:12:0: Attached scsi generic sg1 type 0
sd 1:0:13:0: Attached scsi generic sg2 type 0
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input0 Summit chipset: Starting Cyclone Counter.
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Startingbalanced_irq
Using IPI Shortcut mode
Time: cyclone clocksource has been installed.
logips2pp: Detected unknown logitech mouse model 0
input: PS/2 Logitech Mouse as /class/input/input1 kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Quoted 8 lines · Andrew Morton
Temporarily at
http://userweb.kernel.org/~akpm/2.6.20-rc6-mm3/Will appear later at
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.20-rc6/2.6.20-rc6-mm3/
I was running likely profiling and I noticed that when I turn on the "tickless" option I get the following line,
+unlikely | 21111208| 9367278 need_resched()@:include/linux/sched.h@1597
This means that this line is 21111208 true, and 9367278 false.
This existed on bootup, and stayed after about 7 hours of runtime (mostly idle). Since need_resched is a "static inline" there are multiple instances of need_resched() in the kernel. If I turn off the "tickless" feature this wrong unlikely disappears, and the output looks like this,
unlikely | 0| 169 need_resched()@:include/linux/sched.h@1597 unlikely | 0| 94 need_resched()@:include/linux/sched.h@1597 unlikely | 0| 63 need_resched()@:include/linux/sched.h@1597 unlikely | 0| 19 need_resched()@:include/linux/sched.h@1597 unlikely | 0| 379 need_resched()@:include/linux/sched.h@1597 unlikely | 1| 202596 need_resched()@:include/linux/sched.h@1597 unlikely | 7| 205929 need_resched()@:include/linux/sched.h@1597 unlikely | 6461| 271690 need_resched()@:include/linux/sched.h@1597
Only a little after boot. I suppose this could be a natural side effect of the tickless feature but I thought I would report it anyway.
Daniel
It appears there a problem with the /proc/interrupts entry for "timer" .. It doesn't increment anymore .. This problem exists in the -rt tree also .. I haven't done a bisect , but I'm assuming this is HRT related ..
Also my NMI watchdog isn't functioning , which also exists in the -rt tree, and -mm .. Also likely HRT related ..
I don't have HRT or dynamic tick turned on .. This started happening in -mm2 , and it worked in -mm1 ..
Daniel
Quoted 4 lines · Daniel Walker
It appears there a problem with the
/proc/interruptsentry for "timer" .. It doesn't increment anymore .. This problem exists in the -rt tree also .. I haven't done a bisect , but I'm assuming this is HRT related ..
And why should it increment ? Is there a rule that it has to ?
tglx
Quoted 7 lines · Thomas Gleixner
Quoted 4 lines · Daniel Walker
It appears there a problem with the
/proc/interruptsentry for "timer" .. It doesn't increment anymore .. This problem exists in the -rt tree also .. I haven't done a bisect , but I'm assuming this is HRT related ..And why should it increment ? Is there a rule that it has to ?
I don't know .. I would imagine some users might look at it and wonder why there timer isn't ticking (I know it actually is ticking , but they don't), when it has is every other kernel.
We could just remove the timer entry .
Daniel
Quoted 8 lines · Daniel Walker
Quoted 4 lines
Quoted 2 lines
-rt tree also .. I haven't done a bisect , but I'm assuming this is HRT related ..
And why should it increment ? Is there a rule that it has to ?
I don't know .. I would imagine some users might look at it and wonder why there timer isn't ticking (I know it actually is ticking , but they don't), when it has is every other kernel.
What kind of artificial problem are you creating here ?
Quoted 1 line
We could just remove the timer entry .
No we can't. The timer interrupt is setup and it does not go away, as we keep the PIT as a backup for the broken lapics.
tglx
Quoted 11 lines · Thomas Gleixner
Quoted 8 lines · Daniel Walker
Quoted 4 lines
Quoted 2 lines
-rt tree also .. I haven't done a bisect , but I'm assuming this is HRT related ..
And why should it increment ? Is there a rule that it has to ?
I don't know .. I would imagine some users might look at it and wonder why there timer isn't ticking (I know it actually is ticking , but they don't), when it has is every other kernel.
What kind of artificial problem are you creating here ?
I'm not trying to create anything .. However, as I said before the /proc/interrupts "timer" entry doesn't work the same as it has in other kernels.
If you think that isn't a problem then explain why ..
Quoted 4 lines
Quoted 1 line
We could just remove the timer entry .
No we can't. The timer interrupt is setup and it does not go away, as we keep the PIT as a backup for the broken lapics.
Ok, how about adding the interrupts to the list which are driving the timer ?
Daniel
Quoted 5 lines · Daniel Walker
Quoted 1 line
What kind of artificial problem are you creating here ?
I'm not trying to create anything .. However, as I said before the
/proc/interrupts"timer" entry doesn't work the same as it has in other kernels.
Yes, it is different. Why are you insisting, that something is a problem just because it is different ?
Quoted 1 line
If you think that isn't a problem then explain why ..
Simply because it works and it does not make any sense to have a per cpu timer (lapic) and the PIT firing at the same periodic interval. PIT does nothing else than jiffies64++. The clockevents code just optimizes that away and lets one cpu do the jiffies64++ in its periodic per cpu interrupt.
So where is the problem ?
Quoted 7 lines
Quoted 4 lines
Quoted 1 line
We could just remove the timer entry .
No we can't. The timer interrupt is setup and it does not go away, as we keep the PIT as a backup for the broken lapics.
Ok, how about adding the interrupts to the list which are driving the timer ?
Uurg. /proc/interrupts has nothing to do with timers. It's interrupts statistics. See LOC entry for the lapic ones.
tglx
Quoted 9 lines · Thomas Gleixner
Quoted 5 lines · Daniel Walker
Quoted 1 line
What kind of artificial problem are you creating here ?
I'm not trying to create anything .. However, as I said before the
/proc/interrupts"timer" entry doesn't work the same as it has in other kernels.Yes, it is different. Why are you insisting, that something is a problem just because it is different ?
In this case "different" goes into userspace .. So different could mean userspace regression, which is something that we don't want. I have no idea if any apps use /proc/interrupts , but it's possible since it's been around for a long time.
The reason that I'm bringing it up at all is because people have ask me "Why isn't my timer ticking??"
Quoted 10 lines
Quoted 7 lines
Quoted 4 lines
Quoted 1 line
We could just remove the timer entry .
No we can't. The timer interrupt is setup and it does not go away, as we keep the PIT as a backup for the broken lapics.
Ok, how about adding the interrupts to the list which are driving the timer ?
Uurg.
/proc/interruptshas nothing to do with timers. It's interrupts statistics. See LOC entry for the lapic ones.
Your saying we can't remove it tho, if /proc/interrupts is not related to timers why does the entry exist at all ? Your saying the LOC entry is the new "timer" entry, but we still have the old "timer" entry ..
Getting confusing ..
It might be nicer to list all the registered clock event sources in /proc/interrupts, with more descriptive names ..
Why is it that HRT doesn't use the "timer" as a valid timer?
Daniel
Quoted 8 lines · Daniel Walker
Quoted 7 lines · Thomas Gleixner
Quoted 5 lines · Daniel Walker
Quoted 1 line
What kind of artificial problem are you creating here ?
I'm not trying to create anything .. However, as I said before the
/proc/interrupts"timer" entry doesn't work the same as it has in other kernels.
Quoted 7 lines
Quoted 2 lines
Yes, it is different. Why are you insisting, that something is a problem just because it is different ?
In this case "different" goes into userspace .. So different could mean userspace regression, which is something that we don't want. I have no idea if any apps use
/proc/interrupts, but it's possible since it's been around for a long time.
Well, if you enable dynticks you should expect the number of timer irqs to go down. There's no problem here.
Quoted 2 lines
The reason that I'm bringing it up at all is because people have ask me "Why isn't my timer ticking??"
it's quite easy to explain: because of the new dynticks feature. Both 'timer' and 'LOC' counts go way down.
Quoted 2 lines
It might be nicer to list all the registered clock event sources in
/proc/interrupts, with more descriptive names ..
they are already listed in /proc/interrupts, depending on how they use interrupts. For a more complete list of in-use clockevent drivers see /proc/timer_info. But it would be wrong to touch /proc/interrupts to create some special-case for clockevents.
Ingo
Quoted 2 lines · Ingo Molnar
Well, if you enable dynticks you should expect the number of timer irqs to go down. There's no problem here.
Ok .
Quoted 5 lines
Quoted 2 lines
The reason that I'm bringing it up at all is because people have ask me "Why isn't my timer ticking??"
it's quite easy to explain: because of the new dynticks feature. Both 'timer' and 'LOC' counts go way down.
I don't have that enabled tho .. This is with HRT/dynamic tick both off..
Daniel
Quoted 5 lines · Daniel Walker
Quoted 2 lines
it's quite easy to explain: because of the new dynticks feature. Both 'timer' and 'LOC' counts go way down.
I don't have that enabled tho .. This is with HRT/dynamic tick both off..
your kernel utilizes the kernelin a more optimal way: the new clockevents code now utilizes the local APIC timer irq (represented by the LOC field) for periodic interrupts. The local APIC timer irq has a cost of ~2 usecs per IRQ, while the PIT irq is ~10 usecs per irq. With HZ=1000 this means savings of ~8000 usecs per second - i.e. 8 msecs per second, which is 0.8% more raw CPU power available - which isnt that bad.
we could make this clearer by renaming 'LOC' (which stands for 'LOCal timer interupts' and was added [and misnamed] by yours truly many moons ago) to 'apic-timer' and 'timer' to 'PIT-timer' but /that/ would be more of a userspace visible change than the change in the counter rates.
Ingo
Quoted 4 lines · Ingo Molnar
Quoted 2 lines
I don't have that enabled tho .. This is with HRT/dynamic tick both off..
your kernel utilizes the kernel in a more optimal way: the new
^hardware
Quoted 6 lines
clockevents code now utilizes the local APIC timer irq (represented by the LOC field) for periodic interrupts. The local APIC timer irq has a cost of ~2 usecs per IRQ, while the PIT irq is ~10 usecs per irq. With HZ=1000 this means savings of ~8000 usecs per second - i.e. 8 msecs per second, which is 0.8% more raw CPU power available - which isnt that bad.
Ingo
Quoted 8 lines · Ingo Molnar
Quoted 5 lines · Daniel Walker
Quoted 2 lines
it's quite easy to explain: because of the new dynticks feature. Both 'timer' and 'LOC' counts go way down.
I don't have that enabled tho .. This is with HRT/dynamic tick both off..
Quoted 7 lines
your kernel utilizes the kernelin a more optimal way: the new clockevents code now utilizes the local APIC timer irq (represented by the LOC field) for periodic interrupts. The local APIC timer irq has a cost of ~2 usecs per IRQ, while the PIT irq is ~10 usecs per irq. With HZ=1000 this means savings of ~8000 usecs per second - i.e. 8 msecs per second, which is 0.8% more raw CPU power available - which isnt that bad.
I'm happy it's better .. I'm not saying it's worse .
Quoted 4 lines
we could make this clearer by renaming 'LOC' (which stands for 'LOCal timer interupts' and was added [and misnamed] by yours truly many moons ago) to 'apic-timer' and 'timer' to 'PIT-timer' but /that/ would be more of a userspace visible change than the change in the counter rates.
If we change the current "timer" entry to be listed as "lapic-timer" and not "IO-APIC-edge" (or one of the other names) and replace it with the count from LOC , that would make sense cause that field already changes depending if you have a io-apic or not ..
I think the regression (if you can call it that) is not scripts crashing, but more people not know what's going on with there system ..
Daniel
Quoted 9 lines · Daniel Walker
Quoted 5 lines
we could make this clearer by renaming 'LOC' (which stands for 'LOCal timer interupts' and was added [and misnamed] by yours truly many moons ago) to 'apic-timer' and 'timer' to 'PIT-timer' but /that/ would be more of a userspace visible change than the change in the counter rates.
If we change the current "timer" entry to be listed as "lapic-timer" and not "IO-APIC-edge" (or one of the other names) and replace it with the count from LOC , [...]
doing that would not fake the old behavior (which is your suggestion), LOC is per CPU, while the PIT timer irq that was there is global.
But, as per the previous mails, the new behavior is just fine, because /proc/interrupts just reflects reality. And the way the kernel utilizes the hardware has just changed - for the better.
The same happens when say a network driver implements NAPI: the IRQ count goes way, way down. Or if a driver starts supporing MSI - the IRQ line even moves to another one. Do we try to fix those counts up to match the 'previous behavior'? Of course not. What you are suggesting makes no sense, is against current kernel practices - as we pointed it out to you 7 mails ago.
Quoted 2 lines
[...] that would make sense cause that field already changes depending if you have a io-apic or not ..
(that is something else: it's different because a different irq-chip is behind it.)
Ingo
Quoted 19 lines · Ingo Molnar
Quoted 9 lines · Daniel Walker
Quoted 5 lines
we could make this clearer by renaming 'LOC' (which stands for 'LOCal timer interupts' and was added [and misnamed] by yours truly many moons ago) to 'apic-timer' and 'timer' to 'PIT-timer' but /that/ would be more of a userspace visible change than the change in the counter rates.
If we change the current "timer" entry to be listed as "lapic-timer" and not "IO-APIC-edge" (or one of the other names) and replace it with the count from LOC , [...]
doing that would not fake the old behavior (which is your suggestion), LOC is per CPU, while the PIT timer irq that was there is global.
But, as per the previous mails, the new behavior is just fine, because
/proc/interruptsjust reflects reality. And the way the kernel utilizes the hardware has just changed - for the better.
Quoted 6 lines
The same happens when say a network driver implements NAPI: the IRQ count goes way, way down. Or if a driver starts supporing MSI - the IRQ line even moves to another one. Do we try to fix those counts up to match the 'previous behavior'? Of course not. What you are suggesting makes no sense, is against current kernel practices - as we pointed it out to you 7 mails ago.
I'm not saying we should "fake" anything .. I'm saying list what's really happening .. In a human readable way .
Your saying we should keep it unreadable, and let the users be that much more confused .. Which I don't agree with.
Quoted 5 lines
Quoted 2 lines
[...] that would make sense cause that field already changes depending if you have a io-apic or not ..
(that is something else: it's different because a different irq-chip is behind it.)
Why is that not the case with lapic ?
Daniel
Quoted 3 lines · Daniel Walker
Quoted 3 lines
Quoted 3 lines
If we change the current "timer" entry to be listed as "lapic-timer" and not "IO-APIC-edge" (or one of the other names) and replace it with the count from LOC
[...]
Quoted 4 lines
Quoted 4 lines
But, as per the previous mails, the new behavior is just fine, because
/proc/interruptsjust reflects reality. And the way the kernel utilizes the hardware has just changed - for the better.
Quoted 8 lines
Quoted 6 lines
The same happens when say a network driver implements NAPI: the IRQ count goes way, way down. Or if a driver starts supporing MSI - the IRQ line even moves to another one. Do we try to fix those counts up to match the 'previous behavior'? Of course not. What you are suggesting makes no sense, is against current kernel practices - as we pointed it out to you 7 mails ago.
I'm not saying we should "fake" anything .. [...]
sorry but that's precisely what your suggestion above results in:
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
If we change the current "timer" entry to be listed as "lapic-timer" and not "IO-APIC-edge" (or one of the other names) and replace it with the count from LOC
"replace the timer entry with lapic-timer and put the LOC count there" is faking something that does not reflect reality. The 'timer' count is for IRQ#0, not for the local apic timer.
Quoted 2 lines
[...] I'm saying list what's really happening .. In a human readable way .
we list precisely what is happening: the number of IRQ#0 interrupts and the number of local APIC timer interrupts. Precisely where their traditional place is.
i think you might be confused by the generic name that says 'timer'. You should notice the other bits that are there too:
CPU0 CPU1
0: 495 0 IO-APIC-edge timer
the '0' means IRQ#0. That makes it clear that this is the PIT timer. Clearer now?
Ingo
Quoted 1 line · Ingo Molnar
sorry but that's precisely what your suggestion above results in:
I'm not trying to suggest we "fake" anything. Your just misunderstanding me.. I'm am suggesting we change LOC to something readable. If you think we're "faking" something by dropping the current "timer" request_irq() then we certainly don't need to do that ..
The io-apic timer could potentially be a clock event device, that is it's function isn't it ? It generates interrupts (note I said interrupts) periodically .. The NMI is another example of that, generates non-maskable interrupts based off a clock.. All are clock based interrupt generating devices .. All could be clock event sources, with all the other clock event sources in the system.
It makes sense (to me at least) that we should list all those interrupt generating devices in /proc/interrupts with statistics of their usage..
I'm making suggestion here, you can call it "fake"'ing something or whatever, but I'm still going to pose suggestions.
Quoted 8 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
If we change the current "timer" entry to be listed as "lapic-timer" and not "IO-APIC-edge" (or one of the other names) and replace it with the count from LOC
"replace the timer entry with lapic-timer and put the LOC count there" is faking something that does not reflect reality. The 'timer' count is for IRQ#0, not for the local apic timer.
Quoted 6 lines
Quoted 2 lines
[...] I'm saying list what's really happening .. In a human readable way .
we list precisely what is happening: the number of IRQ#0 interrupts and the number of local APIC timer interrupts. Precisely where their traditional place is.
Empirically, I know that users do not/will not understand what's happened. so take that how ever you want, but _I_ think we should do something so people better understand what has happened.
Daniel
Quoted 6 lines · Daniel Walker
Quoted 1 line · Ingo Molnar
sorry but that's precisely what your suggestion above results in:
I'm not trying to suggest we "fake" anything. Your just misunderstanding me.. [...]
as i pointed it out in the previous mail, the problem is that what you suggested results in preisely that - a count in the wrong place:
Quoted 3 lines
If we change the current "timer" entry to be listed as "lapic-timer" and not "IO-APIC-edge" (or one of the other names) and replace it with the count from LOC
changing the current 'timer' entry (which is line 2 of /proc/interrupts) to be 'listed as lapic-timer' and to 'replace it with the count from LOC' is faking a count in a line where nothing like that should be.
the kernel simply displays reality: IRQ#0 isnt increasing because it's not used, and LOC (local apic timers) is increasing.
Ingo
Quoted 3 lines · Ingo Molnar
changing the current 'timer' entry (which is line 2 of
/proc/interrupts) to be 'listed as lapic-timer' and to 'replace it with the count from LOC' is faking a count in a line where nothing like that should be.
This point is getting irrelevant ..
Quoted 2 lines
the kernel simply displays reality: IRQ#0 isnt increasing because it's not used, and LOC (local apic timers) is increasing.
What about the statistics for the other interrupts in the system ? It clearly doesn't list all interrupts in the system .
Daniel
Quoted 7 lines · Daniel Walker
Quoted 3 lines · Ingo Molnar
changing the current 'timer' entry (which is line 2 of
/proc/interrupts) to be 'listed as lapic-timer' and to 'replace it with the count from LOC' is faking a count in a line where nothing like that should be.This point is getting irrelevant ..
it is very much relevant: faking a count is something we /dont/ want to do with /proc/interrupts, for (very) basic compatibility, simplicity and policy reasons. And that is precisely what your suggestion was to 'solve' this supposed 'problem' - so it's very much relevant.
Quoted 5 lines
Quoted 2 lines
the kernel simply displays reality: IRQ#0 isnt increasing because it's not used, and LOC (local apic timers) is increasing.
What about the statistics for the other interrupts in the system ? It clearly doesn't list all interrupts in the system .
what is your point?
Ingo
Quoted 8 lines · Ingo Molnar
Quoted 6 lines · Daniel Walker
Quoted 3 lines · Ingo Molnar
changing the current 'timer' entry (which is line 2 of
/proc/interrupts) to be 'listed as lapic-timer' and to 'replace it with the count from LOC' is faking a count in a line where nothing like that should be.
Quoted 6 lines
Quoted 1 line
This point is getting irrelevant ..
it is very much relevant: faking a count is something we /dont/ want to do with
/proc/interrupts, for (very) basic compatibility, simplicity and policy reasons. And that is precisely what your suggestion was to 'solve' this supposed 'problem' - so it's very much relevant.
As I said you are misunderstanding me .. which is why this is not relevant any more ..
Please move on .
Quoted 7 lines
Quoted 5 lines
Quoted 2 lines
the kernel simply displays reality: IRQ#0 isnt increasing because it's not used, and LOC (local apic timers) is increasing.
What about the statistics for the other interrupts in the system ? It clearly doesn't list all interrupts in the system .
what is your point?
Isn't the listing inconsistent ? /proc/interrupts only showing some special interrupts, and not others .. For example it shows NMI which is not related to request_irq() .. It shows some clock driver devices (timer, NMI, LOC) and not others (clock event devices) ..
Daniel
Quoted 11 lines · Daniel Walker
Quoted 10 lines · Ingo Molnar
Quoted 7 lines · Daniel Walker
Quoted 3 lines · Ingo Molnar
changing the current 'timer' entry (which is line 2 of
/proc/interrupts) to be 'listed as lapic-timer' and to 'replace it with the count from LOC' is faking a count in a line where nothing like that should be.This point is getting irrelevant ..
Quoted 8 lines
Quoted 5 lines
it is very much relevant: faking a count is something we /dont/ want to do with
/proc/interrupts, for (very) basic compatibility, simplicity and policy reasons. And that is precisely what your suggestion was to 'solve' this supposed 'problem' - so it's very much relevant.As I said you are misunderstanding me .. which is why this is not relevant any more ..
actually, i quoted what you said:
| If we change the current "timer" entry to be listed as "lapic-timer" | and not "IO-APIC-edge" (or one of the other names) and replace it with | the count from LOC
this is a pretty clear sentence, i dont think i misunderstood anything about it. If i did, please point it out specifically.
Ingo
Quoted 8 lines · Ingo Molnar
actually, i quoted what you said:
| If we change the current "timer" entry to be listed as "lapic-timer" | and not "IO-APIC-edge" (or one of the other names) and replace it with | the count from LOCthis is a pretty clear sentence, i dont think i misunderstood anything about it. If i did, please point it out specifically.
Geez , man I've corrected this statement already .. Why don't you quote the corrections. Your not listening cause your ignoring everything I said after this, and accepting only my first statement and rejecting everything else.. Like you want this to descend into a melee .
Last and final correction. I'm saying drop the timer entry, which means drop the call to request_irq() for irq0 . Add lines for lapic-timer which take the place of LOC..
Daniel
Quoted 2 lines · Daniel Walker
Last and final correction. I'm saying drop the timer entry, which means drop the call to
request_irq()for irq0.
Right, that's a real good suggestion. Here's the patch especially for you. Apply it and figure out yourself, why your computer won't boot anymore.
tglx
arch/i386/mach-default/setup.c +2 -0
@@ -95,8 +95,10 @@ static struct irqaction irq0 = {**/ void __init time_init_hook (void ) { +#ifdef CONFIG_THIS_IS_NOT_DWALKERS_COMPUTER irq0.mask =cpumask_of_cpu (0 );setup_irq (0 , &irq0); +#endif }#ifdef CONFIG_MCA
Quoted 8 lines · Daniel Walker
Quoted 6 lines
| If we change the current "timer" entry to be listed as | "lapic-timer" and not "IO-APIC-edge" (or one of the other names) | and replace it with the count from LOCthis is a pretty clear sentence, i dont think i misunderstood anything about it. If i did, please point it out specifically.
Geez , man I've corrected this statement already .. [...]
i'm sorry, but where did you "correct this statement already"? You havent replied to your mail to correct it explicitly, and there's no later statement of yours that says anything near to "let me correct this via X" or "i was wrong here, i meant Y".
the only subsequent reference of yours seems to be:
| I'm not saying we should "fake" anything .. I'm saying list what's | really happening .. In a human readable way .
what you write here does not read as a 'correction', this disputes my characterisation, suggesting that your original point is still intact. How should i have known that you meant this to be a 'correction' of your original point, and that this (whatever it means precisely) replaces it?
if you concede a point or correct a statement then /please/ make it clear. There's nothing bad about being wrong or being stupid occasionally, it happens to all of us.
Quoted 3 lines
Last and final correction. I'm saying drop the timer entry, which means drop the call to
request_irq()for irq0 . Add lines for lapic-timer which take the place of LOC..
it's not a request_irq() but a setup_irq().
dropping the IRQ#0 line would be fatally wrong: /proc/interrupt lists all active interrupt lines. There can (and often is) a count in IRQ#0. Why should it be hidden?
furthermore, as i pointed it out earlier: what you suggest is bad for
compatibility: removing/changing the non-count portions of the LOC or the IRQ#0 entry /will/ break scripts.
Ingo
I guess I will respond ....
Quoted 9 lines · Ingo Molnar
Quoted 7 lines · Daniel Walker
Quoted 6 lines
| If we change the current "timer" entry to be listed as | "lapic-timer" and not "IO-APIC-edge" (or one of the other names) | and replace it with the count from LOCthis is a pretty clear sentence, i dont think i misunderstood anything about it. If i did, please point it out specifically.
Quoted 6 lines
Quoted 1 line
Geez , man I've corrected this statement already .. [...]
i'm sorry, but where did you "correct this statement already"? You havent replied to your mail to correct it explicitly, and there's no later statement of yours that says anything near to "let me correct this via X" or "i was wrong here, i meant Y".
I know that you see corrections as responses to your own email, but it's not universal .. Everyone has their own methodology, AFAIK it's free form ..
Quoted 5 lines
the only subsequent reference of yours seems to be:
| I'm not saying we should "fake" anything .. I'm saying list what's | really happening .. In a human readable way .
Quoted 8 lines
what you write here does not read as a 'correction', this disputes my characterisation, suggesting that your original point is still intact. How should i have known that you meant this to be a 'correction' of your original point, and that this (whatever it means precisely) replaces it?
if you concede a point or correct a statement then /please/ make it clear. There's nothing bad about being wrong or being stupid occasionally, it happens to all of us.
I don't take a literal approach to email, which you seem to be taking .. I think your seeing this thread as an argument for or against something and you have taken a position which you diligently stick to..
My position is not fixed. However, your arguing as if my position was fixed. My perspective of this thread was not to argue for a specific change, but to throw out changes and see if anything stuck ..
Where my statements were suppose to be loose to begin with, so loose as to only spark the start of an idea, not to promote something specific. If you read the start of the thread you'll notice that I gave Thomas two totally opposite ideas.
"We could just remove the timer entry."
or
"[..]how about adding the interrupts to the list which are driving the timer ?"
When I started the thread I had a similar position as Thomas, but I was concerned that I was missing something or the code was missing something.. This was the reason for starting the thread ..
So I'll gladly concede all points. To me it wasn't about the argument, or even my own ideas ..
Daniel
Quoted 7 lines · Daniel Walker
Quoted 4 lines
Quoted 2 lines
What about the statistics for the other interrupts in the system ? It clearly doesn't list all interrupts in the system .
what is your point?
Isn't the listing inconsistent ?
/proc/interruptsonly showing some special interrupts, and not others ..
It shows _ALL_ used interrupts in the system. There is no point to let it show NR_IRQ interrupts with a event count = 0.
Quoted 3 lines
For example it shows NMI which is
not related torequest_irq().. It shows some clock driver devices (timer, NMI, LOC) and not others (clock event devices) ..
PIT is a clock event device and uses IRQ0, where the interrupt count is displayed:
0: 3022812 0 IO-APIC-edge timer
Local APIC timer is a clock event device too and the interrupt count is displayed as well:
LOC: 177795 1755941
There are no other clock event devices in a PC system at the moment and /proc/interrupt does not care, whether the interrupt was setup for a clock event device or something else. It displays the name which is given in the irqaction struct and does not care what it means. I did not change the name in the IRQ#0 setup, so it still displays "timer" (which can either be PIT or HPET), but this is something the interrupt layer does not know and does not care about.
The special interrupts, which are not handled by the generic IRQ layer (LOC, NMI) are displayed to have the complete statistics available.
We did not change anything on that. The changed behavior you are observing (IRQ#0 is not incrementing) is reflecting the reality of the system. IRQ#0 is not firing, so it does not increment.
tglx
Quoted 7 lines · Thomas Gleixner
There are no other clock event devices in a PC system at the moment and
/proc/interruptdoes not care, whether the interrupt was setup for a clock event device or something else. It displays the name which is given in the irqaction struct and does not care what it means. I did not change the name in the IRQ#0 setup, so it still displays "timer" (which can either be PIT or HPET), but this is something the interrupt layer does not know and does not care about.
So your saying the "timer" entry in /proc/interrupts can be either the HPET timer, the PIT timer? Mine says "IO-APIC-edge" which does that map to? It's going though the io-apic but it's still the pit ?
Daniel
Quoted 10 lines · Daniel Walker
Quoted 7 lines · Thomas Gleixner
There are no other clock event devices in a PC system at the moment and
/proc/interruptdoes not care, whether the interrupt was setup for a clock event device or something else. It displays the name which is given in the irqaction struct and does not care what it means. I did not change the name in the IRQ#0 setup, so it still displays "timer" (which can either be PIT or HPET), but this is something the interrupt layer does not know and does not care about.
Quoted 3 lines
So your saying the "timer" entry in
/proc/interruptscan be either the HPET timer, the PIT timer? Mine says "IO-APIC-edge" which does that map to? It's going though the io-apic but it's still the pit ?
IO-APIC: Input/Output Advanced Programmable Interrupt Controller. This device does not generate interrupts by itself. Devices, which generate interrupts are connected to it.
23: 82 0 IO-APIC-fasteoi ohci1394, HDA Intel
This is IRQ#23 coming in via IO-APIC (fasteoi type). The interrupt is shared by two devices, which identified themself as "ohci1394" and "HDA Intel" via request_irq(). The interrupt originates from one of those devices. So it _IS_ going through the IO-APIC, but generated either by the Firewire device or the Audio device.
0: 186222 0 IO-APIC-edge timer
This is IRQ#0 coming in via IO-APIC (edge type). The interrupt is not shared. The device identified itself as "timer" via setup_irq(). The interrupt originates from this device. The interrupt is either caused by PIT or HPET via a hardware switch mechanism, which is activated when you use HPET. There is no way to share IRQ#0 here. It's either or as defined by hardware magic.
tglx
Quoted 7 lines · Daniel Walker
Quoted 7 lines
Quoted 6 lines
Quoted 3 lines
the kernel simply displays reality: IRQ#0 isnt increasing because it's not used, and LOC (local apic timers) is increasing.
What about the statistics for the other interrupts in the system ? It clearly doesn't list all interrupts in the system .
Quoted 6 lines
Quoted 1 line
what is your point?
Isn't the listing inconsistent ?
/proc/interruptsonly showing some special interrupts, and not others .. For example it shows NMI which is not related torequest_irq().. It shows some clock driver devices (timer, NMI, LOC) and not others (clock event devices) ..
it's not inconsistent. /proc/interrupts lists registered interrupts plus some special hardcoded platform interrupts that are not explicitly registered - with the goal of providing a list of all active interrupt sources. /proc/interrupts has been doing that for more than 10 years. Clock event devices themselves are not 'interrupt lines', why should they be listed in /proc/interrupts?
Ingo
Quoted 9 lines · Daniel Walker
Quoted 6 lines
The same happens when say a network driver implements NAPI: the IRQ count goes way, way down. Or if a driver starts supporing MSI - the IRQ line even moves to another one. Do we try to fix those counts up to match the 'previous behavior'? Of course not. What you are suggesting makes no sense, is against current kernel practices - as we pointed it out to you 7 mails ago.
I'm not saying we should "fake" anything .. I'm saying list what's really happening .. In a human readable way .
We do that. IRQ0 is not happening. So simply it does not increment the interrupt count. And it is human readable.
Quoted 2 lines
Your saying we should keep it unreadable, and let the users be that much more confused .. Which I don't agree with.
It is readable, as it reflects the reality which is going on in the system and not some artificial view which you think is how the interrupt count should be presented. /proc/interrupt _IS_ statistics about the number of interrupts on particular interrupt numbers and nothing else.
Quoted 1 line
Why is that not the case with lapic ?
Local APIC is not really part of the interrupt subsystem as it uses a seperate entry vector for historic reasons and therefor is not handled by setup/request/free/... _irq() functions.
tglx
Quoted 9 lines · Daniel Walker
Quoted 4 lines
we could make this clearer by renaming 'LOC' (which stands for 'LOCal timer interupts' and was added [and misnamed] by yours truly many moons ago) to 'apic-timer' and 'timer' to 'PIT-timer' but /that/ would be more of a userspace visible change than the change in the counter rates.
If we change the current "timer" entry to be listed as "lapic-timer" and not "IO-APIC-edge" (or one of the other names) and replace it with the count from LOC , that would make sense cause that field already changes depending if you have a io-apic or not ..
No. We are not fiddling with the IRQ subsystem statistics. IRQ subsystem is unrelated to timers. And we do switch away from PIT if we have an local apic timer, so the output of /proc/interrupt is just a mirror of the real system and not some made up thing, which will make it harder to debug real problems.
Quoted 2 lines
I think the regression (if you can call it that) is not scripts crashing, but more people not know what's going on with there system ..
I did not hear a complaint of anyone except you. I doubt that there will be a big confusion as long as the kernel does work as expected.
tglx
Quoted 5 lines · Thomas Gleixner
Quoted 2 lines
I think the regression (if you can call it that) is not scripts crashing, but more people not know what's going on with there system ..
I did not hear a complaint of anyone except you. I doubt that there will be a big confusion as long as the kernel does work as expected.
This is going to be a slow motion explosion ..
Daniel
Quoted 7 lines · Daniel Walker
Quoted 2 lines
Yes, it is different. Why are you insisting, that something is a problem just because it is different ?
In this case "different" goes into userspace .. So different could mean userspace regression, which is something that we don't want. I have no idea if any apps use
/proc/interrupts, but it's possible since it's been around for a long time.
It _IS_ statistics info about the number of interrupts and has no fixed meaning at all. It does not cause any user space regression, as the interface is still the same. It produces different numbers, like the clock_getres() syscall returns different values on highres and !highres systems.
Quoted 2 lines
The reason that I'm bringing it up at all is because people have ask me "Why isn't my timer ticking??"
So it's a problem of user perception and not of a user space regression. Please stop confusing things.
Quoted 3 lines
Your saying we can't remove it tho, if
/proc/interruptsis not related to timers why does the entry exist at all ? Your saying the LOC entry is the new "timer" entry, but we still have the old "timer" entry ..
Ok. Each irqaction struct which is used to request/setup an interrupt contains a name field. This is the one which shows up
in /proc/interrupts. The one which is used to setup irq0 has .name = "timer".
Quoted 1 line
Getting confusing ..
Sigh.
Quoted 2 lines
It might be nicer to list all the registered clock event sources in
/proc/interrupts, with more descriptive names ..
No. No. No. clockevents has nothing to do with /proc/interrupts.
/proc/interrupts is the statistics interface for the IRQ subsystem.
Quoted 1 line
Why is it that HRT doesn't use the "timer" as a valid timer?
Because local apic timer is better.
tglx
Quoted 5 lines · Thomas Gleixner
Quoted 2 lines
The reason that I'm bringing it up at all is because people have ask me "Why isn't my timer ticking??"
So it's a problem of user perception and not of a user space regression. Please stop confusing things.
At least we agree on this point .. I'm not trying to confuse anything, this issue needs to be discussed ..
Daniel
Quoted 7 lines · Daniel Walker
In this case "different" goes into userspace .. So different could mean userspace regression, which is something that we don't want. I have no idea if any apps use
/proc/interrupts, but it's possible since it's been around for a long time.The reason that I'm bringing it up at all is because people have ask me "Why isn't my timer ticking??"
Because there are two clock sources in the machine and it's using the other one, so the interrupt isn't firing?
Are you saying that the /proc statistics aren't accurate, or that you previously misunderstood what it was actually measuring and you'd now like it to lie?
Quoted 5 lines
Quoted 2 lines
Uurg.
/proc/interruptshas nothing to do with timers. It's interrupts statistics. See LOC entry for the lapic ones.Your saying we can't remove it tho, if
/proc/interruptsis not related to timers why does the entry exist at all ?
I didn't think Thomas even touched the /proc/interrupts reporting code. It's still accurate. The patch changed the usage of timers, /proc/interrupts is accurately showing the change, and you're surprised that what it was measuring wasn't what you thought it was measuring all along.
This ain't jiffies. This is how often the PIT fired. They are not the same thing.
Rob
Signature · 2 lines
"Perfection is reached, not when there is no longer anything to add, but when there is no longer anything to take away." - Antoine de Saint-Exupery
Quoted 9 lines · Rob Landley
Quoted 7 lines · Daniel Walker
In this case "different" goes into userspace .. So different could mean userspace regression, which is something that we don't want. I have no idea if any apps use
/proc/interrupts, but it's possible since it's been around for a long time.The reason that I'm bringing it up at all is because people have ask me "Why isn't my timer ticking??"
Quoted 6 lines
Because there are two clock sources in the machine and it's using the other one, so the interrupt isn't firing?
Are you saying that the /proc statistics aren't accurate, or that you previously misunderstood what it was actually measuring and you'd now like it to lie?
I understand exactly what is happening . The statistics are unclear, and tend to confuse people .
Daniel
Quoted 9 lines · Daniel Walker
Quoted 8 lines · Rob Landley
Quoted 7 lines · Daniel Walker
In this case "different" goes into userspace .. So different could mean userspace regression, which is something that we don't want. I have no idea if any apps use
/proc/interrupts, but it's possible since it's been around for a long time.The reason that I'm bringing it up at all is because people have ask me "Why isn't my timer ticking??"
Ah, you can't answer this question. Right:
A) Because there are multiple timer interrupt sources in the system, and we're now using a newer (better) one.
B) This measures interrupts. It doesn't measure jiffies. Interrupts != jiffies. This is a conceptual issue.
C) /proc/uptime may be of use here.
Quoted 1 line
Quoted 1 line
Because there are two clock sources in the machine and it's using the
other
Quoted 4 lines
Quoted 4 lines
one, so the interrupt isn't firing?
Are you saying that the /proc statistics aren't accurate, or that you previously misunderstood what it was actually measuring and you'd now like
it
Quoted 4 lines
Quoted 1 line
to lie?
I understand exactly what is happening . The statistics are unclear, and tend to confuse people .
You find /proc/interrupts showing interrupts to be _unclear_?
Quoted 1 line
Daniel
Rob
Signature · 2 lines
"Perfection is reached, not when there is no longer anything to add, but when there is no longer anything to take away." - Antoine de Saint-Exupery
PATCH 1/1 #ifdef ACPI_FUTURE_USAGE acpi_os_readable()
In reply to Andrew MortonQuoted 7 lines · Andrew Morton
...
Changes since 2.6.20-rc6-mm2:
...
git-acpi.patch
...
git trees
...
acpi_os_readable() is no longer used.
---
drivers/acpi/osl.c | 2 -- include/acpi/acpiosxf.h | 3 +-- 2 files changed, 1 insertion(+), 4 deletions(-)
include/acpi/acpiosxf.h renamed from include/acpi/acpiosxf.h.old +1 -2
@@ -240,9 +240,8 @@ acpi_os_validate_address(u8 space_id, acpi_physical_address address, acpi_size length); -u8 acpi_os_readable (void *pointer,acpi_size length); -#ifdef ACPI_FUTURE_USAGE +u8 acpi_os_readable (void *pointer,acpi_size length);u8 acpi_os_writable (void *pointer,acpi_size length);#endif
drivers/acpi/osl.c renamed from drivers/acpi/osl.c.old +0 -2
@@ -888,7 +888,6 @@return 0 ; } -#endif /* ACPI_FUTURE_USAGE */ /* Assumes no unreadable holes inbetween */ u8 acpi_os_readable (void *ptr,acpi_size len)
@@ -901,7 +900,6 @@return 1 ; } -#ifdef ACPI_FUTURE_USAGE u8 acpi_os_writable (void *ptr,acpi_size len) {/* could do dummy write (racy) or a kernel page table lookup.
RFC PATCH 1/1 drivers/net/atl1/: possible cleanups
In reply to Andrew MortonQuoted 7 lines · Andrew Morton
...
Changes since 2.6.20-rc6-mm2:
...
git-netdev-all.patch
...
git trees
...
This patch contains the following possible cleanups:
- move extern declarations to atl1.h
- make needlessly global code static
---
BTW: Can we get a MAINTAINERS entry for this driver?
drivers/net/atl1/atl1.h | 6 ++++-- drivers/net/atl1/atl1_ethtool.c | 3 --- drivers/net/atl1/atl1_hw.c | 6 ++---- drivers/net/atl1/atl1_main.c | 8 +++----- drivers/net/atl1/atl1_param.c | 4 +--- 5 files changed, 10 insertions(+), 17 deletions(-)
drivers/net/atl1/atl1.h renamed from drivers/net/atl1/atl1.h.old +4 -2
@@ -34,8 +34,10 @@s32 atl1_up (struct atl1_adapter *adapter);void atl1_down (struct atl1_adapter *adapter);int atl1_reset (struct atl1_adapter *adapter); -s32 atl1_setup_ring_resources (struct atl1_adapter *adapter); -void atl1_free_ring_resources (struct atl1_adapter *adapter); + +extern char atl1_driver_name[]; +extern char atl1_driver_version[]; +extern const struct ethtool_ops atl1_ethtool_ops;struct atl1_adapter ;
drivers/net/atl1/atl1_hw.c renamed from drivers/net/atl1/atl1_hw.c.old +2 -4
@@ -31,8 +31,6 @@#include "atl1.h" -extern char atl1_driver_name[]; -/** * Reset the transmit and receive units; mask and clear all interrupts. * hw - Struct containing variables accessed by shared code
@@ -209,7 +207,7 @@* get_permanent_address * return 0 if get valid mac address, **/ -int atl1_get_permanent_address (struct atl1_hw *hw) +static int atl1_get_permanent_address (struct atl1_hw *hw) {u32 addr[2 ];u32 i, control;
@@ -602,7 +600,7 @@return ret_val; } -struct atl1_spi_flash_dev flash_table[] = { +static struct atl1_spi_flash_dev flash_table[] = {/* MFR_NAME WRSR READ PRGM WREN WRDI RDSR RDID SECTOR_ERASE CHIP_ERASE */ {"Atmel" ,0x00 ,0x03 ,0x02 ,0x06 ,0x04 ,0x05 ,0x15 ,0x52 ,0x62 }, {"SST" ,0x01 ,0x03 ,0x02 ,0x06 ,0x04 ,0x05 ,0x90 ,0x20 ,0x60 },
drivers/net/atl1/atl1_ethtool.c renamed from drivers/net/atl1/atl1_ethtool.c.old +0 -3
@@ -31,9 +31,6 @@#include "atl1.h" -extern char atl1_driver_name[]; -extern char atl1_driver_version[]; -struct atl1_stats {char stat_string[ETH_GSTRING_LEN ];int sizeof_stat;
drivers/net/atl1/atl1_param.c renamed from drivers/net/atl1/atl1_param.c.old +1 -3
@@ -26,8 +26,6 @@#include <linux/moduleparam.h> #include "atl1.h" -extern char atl1_driver_name[]; -/** * This is the only thing that needs to be changed to adjust the * maximum number of ports that the driver can manage.
@@ -68,7 +66,7 @@module_param_array_named (flash_vendor, flash_vendor, int, &num_flash_vendor,0 );MODULE_PARM_DESC (flash_vendor,"SPI flash vendor" ); -int enable_msi; +static int enable_msi;module_param (enable_msi, int,0444 );MODULE_PARM_DESC (enable_msi,"Enable PCI MSI" );
drivers/net/atl1/atl1_main.c renamed from drivers/net/atl1/atl1_main.c.old +3 -5
@@ -95,8 +95,6 @@MODULE_LICENSE ("GPL" );MODULE_VERSION (DRIVER_VERSION ); -extern struct ethtool_ops atl1_ethtool_ops; -/** * atl1_pci_tbl - PCI Device ID Table **/
@@ -178,7 +176,7 @@* * Return 0 on success, negative on failure **/ -s32 atl1_setup_ring_resources (struct atl1_adapter * adapter) +static s32 atl1_setup_ring_resources (struct atl1_adapter * adapter) {struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring;struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring;
@@ -1221,7 +1219,7 @@* atl1_irq_disable - Mask off interrupt generation on the NIC * @adapter: board private structure **/ -void atl1_irq_disable (struct atl1_adapter *adapter) +static void atl1_irq_disable (struct atl1_adapter *adapter) {atomic_inc (&adapter->irq_sem);iowrite32 (0 , adapter->hw.hw_addr +REG_IMR );
@@ -1749,7 +1747,7 @@* * Free all transmit software resources **/ -void atl1_free_ring_resources (struct atl1_adapter *adapter) +static void atl1_free_ring_resources (struct atl1_adapter *adapter) {struct pci_dev *pdev = adapter->pdev;struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring;
Re: [RFC: -mm patch] drivers/net/atl1/: possible cleanups
Quoted 10 lines · On Tue, 6 Feb 2007 23:12:29 +0100 Adrian Bunk <[email protected]> wrote:
Quoted 7 lines · Andrew Morton
...
Changes since 2.6.20-rc6-mm2:
...
git-netdev-all.patch
...
git trees
...
Quoted 3 lines
This patch contains the following possible cleanups:
- move extern declarations toatl1.h
- make needlessly global code static
Adrian,
The atl1 driver currently follows this development pathway:
developer -> netdev#atl1 -> netdev#ALL -> -mm
Your patch is just a little bit out ahead of us. Some of your suggested changes are already in the pipeline; we're just waiting for Jeff to merge netdev#atl1 into netdev#ALL. Should be soon.
Quoted 6 lines
Signed-off-by Adrian Bunk <[email protected]>---
BTW: Can we get a
MAINTAINERSentry for this driver?
Already submitted to netdev#atl1.
http://lkml.org/lkml/2007/2/3/174
Quoted 14 lines
drivers/net/atl1/atl1.h | 6 ++++-- drivers/net/atl1/atl1_ethtool.c | 3 --- drivers/net/atl1/atl1_hw.c | 6 ++---- drivers/net/atl1/atl1_main.c | 8 +++----- drivers/net/atl1/atl1_param.c | 4 +--- 5 files changed, 10 insertions(+), 17 deletions(-)--- linux-2.6.20-rc6-mm3/drivers/net/atl1/atl1.h.old
2007-02-06 07:55:58.000000000 +0100 +++
linux-2.6.20-rc6-mm3/drivers/net/atl1/atl1.h2007-02-06
08:19:50.000000000 +0100 @@ -34,8 +34,10 @@ s32atl1_up(struct atl1_adapter *adapter); voidatl1_down(struct atl1_adapter *adapter);
intatl1_reset(struct atl1_adapter *adapter);
drivers/net/atl1/atl1.h line 39
Quoted 5 lines
drivers/net/atl1/atl1.h renamed from drivers/net/atl1/atl1.h.old +3
-2-s32 atl1_setup_ring_resources (struct atl1_adapter *adapter); -void atl1_free_ring_resources (struct atl1_adapter *adapter); + +extern char atl1_driver_name[]; +extern char atl1_driver_version[];
netdev#atl1 already has this change.
The rest of these I'll bundle up and submit to netdev#atl1, too. Will that work for you?
Quoted 109 lines
+extern const struct
ethtool_opsatl1_ethtool_ops;struct
atl1_adapter;--- linux-2.6.20-rc6-mm3/drivers/net/atl1/atl1_hw.c.old
2007-02-06 07:52:20.000000000 +0100 +++
linux-2.6.20-rc6-mm3/drivers/net/atl1/atl1_hw.c2007-02-06
07:56:22.000000000 +0100 @@ -31,8 +31,6 @@ #include "atl1.h"drivers/net/atl1/atl1_hw.c renamed from drivers/net/atl1/atl1_hw.c.old +0
-2-extern char atl1_driver_name[]; -/** * Reset the transmit and receive units; mask and clear all interrupts.
* hw - Struct containing variables accessed by shared codedrivers/net/atl1/atl1_hw.c renamed from drivers/net/atl1/atl1_hw.c.old +2
-2@@ -209,7 +207,7 @@* get_permanent_address * return 0 if get valid mac address, **/ -int atl1_get_permanent_address (struct atl1_hw *hw) +static int atl1_get_permanent_address (struct atl1_hw *hw) {u32 addr[2 ];u32 i, control;@@ -602,7 +600,7 @@return ret_val; } -struct atl1_spi_flash_dev flash_table[] = { +static struct atl1_spi_flash_dev flash_table[] = {/* MFR_NAME WRSR READ PRGM WREN WRDI RDSR RDID SECTOR_ERASE CHIP_ERASE */ {"Atmel" ,0x00 ,0x03 ,0x02 ,0x06 ,0x04 ,0x05 ,0x15 ,0x52 ,0x62 }, {"SST" ,0x01 ,0x03 ,0x02 ,0x06 ,
0x04,0x05,0x90,0x20,0x60}, ---
linux-2.6.20-rc6-mm3/drivers/net/atl1/atl1_ethtool.c.old2007-02-06 07:57:04.000000000 +0100 +++ linux-2.6.20-rc6-mm3/drivers/net/atl1/atl1_ethtool.c 2007-02-06 07:57:10.000000000 +0100 @@ -31,9 +31,6 @@ #include"
atl1.h"drivers/net/atl1/atl1_ethtool.c renamed from drivers/net/atl1/atl1_ethtool.c.old +0
-4-extern char atl1_driver_name[]; -extern char atl1_driver_version[]; -struct atl1_stats {char stat_string[ETH_GSTRING_LEN ];int sizeof_stat; --- linux-2.6.20-rc6-mm3/drivers/net/atl1/atl1_param.c.old2007-02-06 07:57:18.000000000 +0100 +++
linux-2.6.20-rc6-mm3/drivers/net/atl1/atl1_param.c2007-02-06
08:16:39.000000000 +0100 @@ -26,8 +26,6 @@ #include <linux/moduleparam.h> #include "atl1.h"drivers/net/atl1/atl1_param.c renamed from drivers/net/atl1/atl1_param.c.old +0
-2-extern char atl1_driver_name[]; -/** * This is the only thing that needs to be changed to adjust the * maximum number of ports that the driver can manage. @@ -68,7 +66,7 @@ module_param_array_named(flash_vendor, flash_vendor, int,
&num_flash_vendor, 0);MODULE_PARM_DESC(flash_vendor, "SPI flash vendor");drivers/net/atl1/atl1_param.c renamed from drivers/net/atl1/atl1_param.c.old +1
-2-int enable_msi; +static int enable_msi;module_param (enable_msi, int,0444 );MODULE_PARM_DESC (enable_msi,"Enable PCI MSI" ); --- linux-2.6.20-rc6-mm3/drivers/net/atl1/atl1_main.c.old2007-02-06 07:58:37.000000000 +0100 +++
linux-2.6.20-rc6-mm3/drivers/net/atl1/atl1_main.c2007-02-06
08:15:51.000000000 +0100 @@ -95,8 +95,6 @@MODULE_LICENSE("GPL");
MODULE_VERSION(DRIVER_VERSION);drivers/net/atl1/atl1_main.c renamed from drivers/net/atl1/atl1_main.c.old +3
-6-extern struct ethtool_ops atl1_ethtool_ops; -/** * atl1_pci_tbl - PCI Device ID Table **/ @@ -178,7 +176,7 @@* * Return 0 on success, negative on failure **/ -s32 atl1_setup_ring_resources (struct atl1_adapter * adapter) +static s32 atl1_setup_ring_resources (struct atl1_adapter * adapter) {struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring;struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring;@@ -1221,7 +1219,7 @@* atl1_irq_disable - Mask off interrupt generation on the NIC * @adapter: board private structure **/ -void atl1_irq_disable (struct atl1_adapter *adapter) +static void atl1_irq_disable (struct atl1_adapter *adapter) {atomic_inc (&adapter->irq_sem);iowrite32 (0 , adapter->hw.hw_addr +REG_IMR );@@ -1749,7 +1747,7 @@* * Free all transmit software resources **/ -void atl1_free_ring_resources (struct atl1_adapter *adapter) +static void atl1_free_ring_resources (struct atl1_adapter *adapter) {struct pci_dev *pdev = adapter->pdev;struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; -To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [RFC: -mm patch] drivers/net/atl1/: possible cleanups
Quoted 3 lines · Jay Cliburn
Your patch is just a little bit out ahead of us. Some of your suggested changes are already in the pipeline; we're just waiting for Jeff to merge netdev#atl1 into netdev#ALL. Should be soon.
Technical note: merging #atl1 into #ALL happens each time netdev-2.6.git is flushed out from my local machine.
Jeff
Re: [RFC: -mm patch] drivers/net/atl1/: possible cleanups
Quoted 8 lines · Jeff Garzik
Quoted 3 lines · Jay Cliburn
Your patch is just a little bit out ahead of us. Some of your suggested changes are already in the pipeline; we're just waiting for Jeff to merge netdev#atl1 into netdev#ALL. Should be soon.
Technical note: merging #atl1 into #ALL happens each time netdev-2.6.git is flushed out from my local machine.
Noted. Thanks.
Re: [RFC: -mm patch] drivers/net/atl1/: possible cleanups
In reply to Jay CliburnQuoted 20 lines · Jay Cliburn
On Tue, 6 Feb 2007 23:12:29 +0100
Adrian Bunk <[email protected]> wrote:
...Quoted 3 lines
This patch contains the following possible cleanups:
- move extern declarations toatl1.h
- make needlessly global code staticAdrian,
The atl1 driver currently follows this development pathway:
developer -> netdev#atl1 -> netdev#ALL -> -mm
Your patch is just a little bit out ahead of us. Some of your suggested changes are already in the pipeline; we're just waiting for Jeff to merge netdev#atl1 into netdev#ALL. Should be soon.
Quoted 3 lines
Signed-off-by Adrian Bunk <[email protected]>
Quoted 7 lines
Quoted 3 lines
---
BTW: Can we get a
MAINTAINERSentry for this driver?Already submitted to netdev#atl1.
:-)
Quoted 11 lines
drivers/net/atl1/atl1.h line 39
Quoted 5 lines
drivers/net/atl1/atl1.h renamed from drivers/net/atl1/atl1.h.old +3
-2-s32 atl1_setup_ring_resources (struct atl1_adapter *adapter); -void atl1_free_ring_resources (struct atl1_adapter *adapter); + +extern char atl1_driver_name[]; +extern char atl1_driver_version[];netdev#atl1 already has this change.
The rest of these I'll bundle up and submit to netdev#atl1, too. Will that work for you?
...
Do what you consider the right thing - I don't care how it gets into the various trees.
cu
Adrian
Signature · 4 lines
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon SeedPATCH 1/1 drivers/scsi/aacraid/: cleanups
In reply to Andrew MortonQuoted 7 lines · Andrew Morton
...
Changes since 2.6.20-rc6-mm2:
...
git-scsi-misc.patch
...
git trees
...
This patch contains the following cleanups:
- proper prototypes for global code in aacraid.h
- aac_rx_start_adapter() can now become static
---
drivers/scsi/aacraid/aacraid.h | 3 +++ drivers/scsi/aacraid/linit.c | 2 -- drivers/scsi/aacraid/nark.c | 3 --- drivers/scsi/aacraid/rkt.c | 3 --- drivers/scsi/aacraid/rx.c | 2 +- 5 files changed, 4 insertions(+), 9 deletions(-)
drivers/scsi/aacraid/aacraid.h renamed from drivers/scsi/aacraid/aacraid.h.old +3 -0
@@ -1840,8 +1840,11 @@int aac_get_adapter_info (struct aac_dev * dev);int aac_send_shutdown (struct aac_dev *dev);int aac_probe_container (struct aac_dev *dev,int cid); +int _aac_rx_init (struct aac_dev *dev); +int aac_rx_select_comm (struct aac_dev *dev,int comm);extern int numacb;extern int acbsize;extern char aac_driver_version[];extern int startup_timeout;extern int aif_timeout; +extern int expose_physicals;
drivers/scsi/aacraid/rx.c renamed from drivers/scsi/aacraid/rx.c.old +1 -1
@@ -294,7 +294,7 @@* Start up processing on an i960 based AAC adapter */ -void aac_rx_start_adapter (struct aac_dev *dev) +static void aac_rx_start_adapter (struct aac_dev *dev) {struct aac_init *init;
drivers/scsi/aacraid/linit.c renamed from drivers/scsi/aacraid/linit.c.old +0 -2
@@ -82,8 +82,6 @@static int aac_cfg_major =-1 ;char aac_driver_version[] =AAC_DRIVER_FULL_VERSION ; -extern int expose_physicals; -/* * Because of the way Linux names scsi devices, the order in this table has * become important. Check for on-board Raid first, add-in cards second.
drivers/scsi/aacraid/nark.c renamed from drivers/scsi/aacraid/nark.c.old +0 -3
@@ -74,9 +74,6 @@int aac_nark_init (struct aac_dev * dev) { -extern int _aac_rx_init (struct aac_dev *dev); -extern int aac_rx_select_comm (struct aac_dev *dev,int comm); -/* * Fill in the function dispatch table. */
drivers/scsi/aacraid/rkt.c renamed from drivers/scsi/aacraid/rkt.c.old +0 -3
@@ -45,7 +45,6 @@static int aac_rkt_select_comm (struct aac_dev *dev,int comm) {int retval; -extern int aac_rx_select_comm (struct aac_dev *dev,int comm); retval =aac_rx_select_comm (dev, comm);if (comm ==AAC_COMM_MESSAGE ) {/*
@@ -97,8 +96,6 @@int aac_rkt_init (struct aac_dev *dev) { -extern int _aac_rx_init (struct aac_dev *dev); -/* * Fill in the function dispatch table. */
PATCH 1/1 make gfs2_writepages() static
In reply to Andrew MortonQuoted 7 lines · Andrew Morton
...
Changes since 2.6.20-rc6-mm2:
...
git-gfs2-nmw.patch
...
git trees
...
This patch makes the needlessly global gfs2_writepages() static.
fs/gfs2/ops_address.c renamed from fs/gfs2/ops_address.c.old +2 -1
@@ -170,7 +170,8 @@* and write whole extents at once. This is a big reduction in the * number of I/O requests we send and the bmap calls we make in this case. */ -int gfs2_writepages (struct address_space *mapping,struct writeback_control *wbc) +static int gfs2_writepages (struct address_space *mapping, +struct writeback_control *wbc) {struct inode *inode = mapping->host;struct gfs2_inode *ip =GFS2_I (inode);
Re: [-mm patch] make gfs2_writepages() static
Hi,
Now applied to the GFS2 -nmw git tree. Thanks,
Steve.
Quoted 27 lines · Adrian Bunk
Quoted 7 lines · Andrew Morton
...
Changes since 2.6.20-rc6-mm2:
...
git-gfs2-nmw.patch
...
git trees
...This patch makes the needlessly global
gfs2_writepages()static.Signed-off-by Adrian Bunk <[email protected]>fs/gfs2/ops_address.c renamed from fs/gfs2/ops_address.c.old +2
-1@@ -170,7 +170,8 @@* and write whole extents at once. This is a big reduction in the * number of I/O requests we send and the bmap calls we make in this case. */ -int gfs2_writepages (struct address_space *mapping,struct writeback_control *wbc) +static int gfs2_writepages (struct address_space *mapping, +struct writeback_control *wbc) {struct inode *inode = mapping->host;struct gfs2_inode *ip =GFS2_I (inode);