Skip to contentSkip to conversation

Linux 2.6.16.40

DISCUSSION Adrian Bunk 2 participants 4 messages Feb 10, 2007 – May 8, 2007

lore
Share & tools
lore
#0 lore raw

New drivers since 2.6.16.39:
- Areca ARC11X0/ARC12X0 SATA-RAID support
- AMD Athlon64/FX and Opteron temperature sensor

Location:
ftp://ftp.kernel.org/pub/linux/kernel/v2.6/

git tree:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-2.6.16.y.git

Changes since 2.6.16.39:

Adrian Bunk (2):

      Linux 2.6.16.40-rc1
      Linux 2.6.16.40

Andrew Morton (1):
[SCSI] areca sysfs fix

Bartlomiej Zolnierkiewicz (1):

      ia64: add pci_get_legacy_ide_irq()

Erich Chen (1):

      [SCSI] arcmsr: initial driver, version 1.20.00.13

James Bottomley (1):
[SCSI] arcmsr: fix up sysfs values

Jeff Garzik (1):
[libata] use kmap_atomic(KM_IRQ0) in SCSI simulator

Neil Brown (1):
Make 'repair' actually work for raid1.

Rudolf Marek (4):
hwmon: New driver k8temp
k8temp: Add documentation
k8temp: Documentation update
hwmon: Update Rudolf Marek's e-mail address

Vladimir Saveliev (1):
reiserfs: avoid tail packing if an inode was ever mmapped

 Documentation/hwmon/k8temp          |   55 +
 Documentation/scsi/ChangeLog.arcmsr |   56 +
 Documentation/scsi/arcmsr_spec.txt  |  574 ++++++++++
 MAINTAINERS                         |    6 
 Makefile                            |    2 
 drivers/hwmon/Kconfig               |   12 
 drivers/hwmon/Makefile              |    1 
 drivers/hwmon/hwmon-vid.c           |    4 
 drivers/hwmon/k8temp.c              |  292 +++++
 drivers/hwmon/w83792d.c             |    2 
 drivers/i2c/busses/i2c-ali1563.c    |    2 
 drivers/md/md.c                     |    2 
 drivers/md/raid1.c                  |    5 
 drivers/scsi/Kconfig                |   14 
 drivers/scsi/Makefile               |    1 
 drivers/scsi/arcmsr/Makefile        |    6 
 drivers/scsi/arcmsr/arcmsr.h        |  472 ++++++++
 drivers/scsi/arcmsr/arcmsr_attr.c   |  381 +++++++
 drivers/scsi/arcmsr/arcmsr_hba.c    | 1496 ++++++++++++++++++++++++++++
 drivers/scsi/libata-scsi.c          |    4 
 fs/reiserfs/file.c                  |   20 
 fs/reiserfs/inode.c                 |    2 
 include/asm-ia64/pci.h              |    6 
 include/linux/pci_ids.h             |   18 
 include/linux/reiserfs_fs_i.h       |    2 
 25 files changed, 3426 insertions(+), 9 deletions(-)
#1 lore raw
Quoted 79 lines · Adrian Bunk

New drivers since 2.6.16.39:
- Areca ARC11X0/ARC12X0 SATA-RAID support
- AMD Athlon64/FX and Opteron temperature sensor

Location:
ftp://ftp.kernel.org/pub/linux/kernel/v2.6/

git tree:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-2.6.16.y.git

Changes since 2.6.16.39:

Adrian Bunk (2):

      Linux 2.6.16.40-rc1
      Linux 2.6.16.40

Andrew Morton (1):
[SCSI] areca sysfs fix

Bartlomiej Zolnierkiewicz (1):

      ia64: add pci_get_legacy_ide_irq()

Erich Chen (1):

      [SCSI] arcmsr: initial driver, version 1.20.00.13

James Bottomley (1):
[SCSI] arcmsr: fix up sysfs values

Jeff Garzik (1):
[libata] use kmap_atomic(KM_IRQ0) in SCSI simulator

Neil Brown (1):
Make 'repair' actually work for raid1.

Rudolf Marek (4):
hwmon: New driver k8temp
k8temp: Add documentation
k8temp: Documentation update
hwmon: Update Rudolf Marek's e-mail address

Vladimir Saveliev (1):
reiserfs: avoid tail packing if an inode was ever mmapped

 Documentation/hwmon/k8temp          |   55 +
 Documentation/scsi/ChangeLog.arcmsr |   56 +
 Documentation/scsi/arcmsr_spec.txt  |  574 ++++++++++
 MAINTAINERS                         |    6 
 Makefile                            |    2 
 drivers/hwmon/Kconfig               |   12 
 drivers/hwmon/Makefile              |    1 
 drivers/hwmon/hwmon-vid.c           |    4 
 drivers/hwmon/k8temp.c              |  292 +++++
 drivers/hwmon/w83792d.c             |    2 
 drivers/i2c/busses/i2c-ali1563.c    |    2 
 drivers/md/md.c                     |    2 
 drivers/md/raid1.c                  |    5 
 drivers/scsi/Kconfig                |   14 
 drivers/scsi/Makefile               |    1 
 drivers/scsi/arcmsr/Makefile        |    6 
 drivers/scsi/arcmsr/arcmsr.h        |  472 ++++++++
 drivers/scsi/arcmsr/arcmsr_attr.c   |  381 +++++++
 drivers/scsi/arcmsr/arcmsr_hba.c    | 1496 ++++++++++++++++++++++++++++
 drivers/scsi/libata-scsi.c          |    4 
 fs/reiserfs/file.c                  |   20 
 fs/reiserfs/inode.c                 |    2 
 include/asm-ia64/pci.h              |    6 
 include/linux/pci_ids.h             |   18 
 include/linux/reiserfs_fs_i.h       |    2 
 25 files changed, 3426 insertions(+), 9 deletions(-)

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

#2 lore raw
In reply to Adrian Bunk
Quoted 3 lines · Adrian Bunk

New drivers since 2.6.16.39:
- Areca ARC11X0/ARC12X0 SATA-RAID support
- AMD Athlon64/FX and Opteron temperature sensor

Sorry - I think I just sent a blank reply to this! Oops.

I was going to say - thanks. We'll definitely be using this kernel since we've found that 2.6.19.2 has a significantly worse IO profile and either the 2.6.16.40-rc1 kernel or 2.6.18 on otherwise identical machines with pretty stable loads (so we can compare back to previous weeks).

Now to figure out what's causing the extra load in the 2.6.19 branch!

Bron.

#3 lore raw
Quoted 7 lines · Bron Gondwana
Quoted 3 lines · Adrian Bunk

New drivers since 2.6.16.39:
- Areca ARC11X0/ARC12X0 SATA-RAID support
- AMD Athlon64/FX and Opteron temperature sensor

Sorry - I think I just sent a blank reply to this! Oops.

Quoted 8 lines

I was going to say - thanks. We'll definitely be using this kernel since we've found that 2.6.19.2 has a significantly worse IO profile and either the 2.6.16.40-rc1 kernel or 2.6.18 on otherwise identical machines with pretty stable loads (so we can compare back to previous weeks).

Now to figure out what's causing the extra load in the 2.6.19 branch!

By the way, we've just tried a 2.6.20.11 kernel on another machine and so far (fingers crossed) we're not seeing the load issues we had with the 2.6.19 kernel we were using.

Given that the Areca driver is the same in both, the only other funky thing we did was a single patch to ReiserFS, but we're applying that same patch on 2.6.20.

(my sneaking suspicion was that the delayed bitmap loading was to blame, but it's hard to test these things short of multiple reboots, and we don't have a testing Cyrus install that we can load that heavily)

Anyway - if this goes well for the next couple of days we'll probably stop tracking the 2.6.16 series. Thanks again, very much, for your work with 2.6.16. It was fantastic to have this resource to keep us from having to chase more recent kernels just to get the patches we needed!

Bron.