Skip to contentSkip to conversation

Problem of USB - error 71 : how configure kernel to dongle with chipset

DISCUSSION Alex Davis 3 participants 3 messages Feb 10, 2007

lore
Share & tools
lore

Alex Davis

author
#0 lore raw

As you are using ndiswrapper, you won't much if any help from the kernel developers. ndiswrapper taints the kernel as it links closed-source drivers into kernel space.

I strongly advise you to post this question on the ndiswrapper mailing list.

Good luck.

-Alex

Quoted 11 lines

Hi !
I'm trying to use a dongle with ndiswrapper, but it fails because a problem of usb. Indeed, when I put on first the dongle, a lsusb give :
Bus 001 Device 002: ID 0457:0163 Silicon Integrated Systems Corps. Bus 001 Device 001: ID 0000:0000
But, 10 to 30 seconds later, the dongle is not recognize with an error -71. lsusb give :
Bus 001 Device 001: ID 0000:0000
How can I configure the kernel to have the good configuration ? I tried different ways, but it fails.

Quoted 2 lines

Thanks for help,
Thibaud.

I code, therefore I am

____________________________________________________________________________________
TV dinner still cooling?
Check out "Tonight's Picks" on Yahoo! TV.
http://tv.yahoo.com/

#1 lore raw

Thanks. In effect, I already post this question in the ndiswrapper list. So, they told me that was a problem of USB and of kernel. Then, I'm looking for configuration of the kernel, because I compiled the 2.6.19, but I no more success. Actually, lsusb recognize, then don't recognize the machine a few seconds after. Ndiswrapper can be installed or not, that change nothing.

This is the answer from which I was able to touch with you :

Quoted 3 lines · --- Thibaud Hulin
Quoted 3 lines

So, 30 seconds later, the dongle is not recognize. lsusb give :
Bus 001 Device 001: ID 0000:0000
So, I can't use my dongle.

If 'lsusb' doesn't see the card, it may indicate problem with your USB host (either hardware, or host driver or both). You may want to try different kernels. Until that part works right, ndiswrapper won't be able to initialize the card.

Giri

Quoted 8 lines · Alex Davis

As you are using ndiswrapper, you won't much if any help from the kernel developers. ndiswrapper taints the kernel as it links closed-source drivers into kernel space.

I strongly advise you to post this question on the ndiswrapper mailing list.

Good luck.

-Alex

#2 lore raw

Am Samstag, 10. Februar 2007 17:59 schrieb Thibaud Hulin:

Quoted 6 lines

Thanks. In effect, I already post this question in the ndiswrapper list. So, they told me that was a problem of USB and of kernel. Then, I'm looking for configuration of the kernel, because I compiled the 2.6.19, but I no more success. Actually, lsusb recognize, then don't recognize the machine a few seconds after. Ndiswrapper can be installed or not, that change nothing.

If you can replicate this without ndiswrapper having been loaded ever, this is another matter. Post again to the usb list and provide /var/log/messages.

Regards
Oliver