Skip to contentSkip to conversation

mfd: SM501 core driver (#3)

PATCH In review Ben Dooks 1 participant 2 messages Feb 13, 2007 Multifunction devices (MFD)

lore
Share & tools
lore

Ben Dooks

author
#0 lore raw

PATCH 1/1 mfd: SM501 core driver (#3)

A new release of the SM501 core mfd driver.

This driver provides the core functionality of the SM501, which is a multi-function chip including two framebuffers, video acceleration, USB, and many other peripheral blocks.

The driver exports a number of entries for the peripheral drivers to use.

drivers/mfd/Kconfig +14 -0
diff -urpN -X ../dontdiff linux-2.6.20/drivers/mfd/Kconfig linux-2.6.20-sm501-2/drivers/mfd/Kconfig
@@ -2,6 +2,20 @@
 # Multifunction miscellaneous devices
 #
 
+menu "Multifunction device drivers"
+
+config MFD_SM501
+	tristate "Support for Silicon Motion SM501"
+	 ---help---
+	  This is the core driver for the Silicon motion SM501 multimedia 
+	  companion chip. This device is a multifunction device which may 
+	  provide numerous interfaces including USB host controller USB gadget,
+	  Asyncronous Serial ports, Audio functions and a dual display video 
+	  interface. The device may be connected by PCI or local bus with 
+	  varying functions enabled.
+
+endmenu
+
 menu "Multimedia Capabilities Port drivers"
 	depends on ARCH_SA1100
 
drivers/mfd/Makefile +2 -0
diff -urpN -X ../dontdiff linux-2.6.20/drivers/mfd/Makefile linux-2.6.20-sm501-2/drivers/mfd/Makefile
@@ -2,6 +2,8 @@
 # Makefile for multifunction miscellaneous devices
 #
 
+obj-$(CONFIG_MFD_SM501)		+= sm501.o
+
 obj-$(CONFIG_MCP)		+= mcp-core.o
 obj-$(CONFIG_MCP_SA11X0)	+= mcp-sa11x0.o
 obj-$(CONFIG_MCP_UCB1200)	+= ucb1x00-core.o
drivers/mfd/sm501.c +1148 -0

1,148 lines not on this page · raw message

include/linux/sm501-regs.h +357 -0

357 lines not on this page · raw message

include/linux/sm501.h +170 -0

170 lines not on this page · raw message

author
#1 lore raw
Quoted 7 lines · Ben Dooks

A new release of the SM501 core mfd driver.

This driver provides the core functionality of the SM501, which is a multi-function chip including two framebuffers, video acceleration, USB, and many other peripheral blocks.

Quoted 5 lines

The driver exports a number of entries for the peripheral drivers to use.

I would just like to add that I belive that I have made all the relevant adjustments from the feedback from the previous two patches. If there is nothing else from anyone, could this be merged in the current development window?

We have several successful reports from users of the previous patches on a variety of architectures including SH4, PowerPC and ARM.

Signature · 3 lines
Ben ([email protected], http://www.fluff.org/)

  'a smiley only costs 4 bytes'