Add some initial test cases.
PATCH 1/1 Add some initial test cases.
Add the original simple test case and a case with different based cell values. Correct output asm files as well as stderr is captured.
---
Moved the example test.dts file into the test directory and added another one with some base examples in it. Captured correct output and at least one DTC command so far. We'll work on automating it some more later I suppose.
tests/base01.asm | 175 +++++++++++++++++++++++++ tests/base01.cmd | 1 + tests/base01.dts | 31 +++++ tests/base01.stderr | 6 + tests/test01.asm | 294 ++++++++++++++++++++++++++++++++++++++++++ test.dts => tests/test01.dts | 0 tests/test01.stderr | 4 + 7 files changed, 511 insertions(+), 0 deletions(-) create mode 100644 tests/base01.asm create mode 100644 tests/base01.cmd create mode 100644 tests/base01.dts create mode 100644 tests/base01.stderr create mode 100644 tests/test01.asm rename test.dts => tests/test01.dts (100%) create mode 100644 tests/test01.stderr
tests/base01.asm new file +175 -0
@@ -0,0 +1,175 @@ +/* autogenerated by dtc, do not edit */ + +#define OF_DT_HEADER 0xd00dfeed +#define OF_DT_BEGIN_NODE 0x1 +#define OF_DT_END_NODE 0x2 +#define OF_DT_PROP 0x3 +#define OF_DT_END 0x9 + + .globl dt_blob_start +dt_blob_start: +_dt_blob_start: + .globl dt_header +dt_header: +_dt_header: + .long OF_DT_HEADER /* magic */ + .long _dt_blob_end - _dt_blob_start /* totalsize */ + .long _dt_struct_start - _dt_blob_start /* off_dt_struct */ + .long _dt_strings_start - _dt_blob_start /* off_dt_strings */ + .long _dt_reserve_map - _dt_blob_start /* off_dt_strings */ + .long 16 /* version */ + .long 16 /* last_comp_version */ + .long 0 /*boot_cpuid_phys*/ + .long _dt_strings_end - _dt_strings_start /* size_dt_strings */ + .balign 8 + .globl dt_reserve_map +dt_reserve_map: +_dt_reserve_map: +/* Memory reserve map from source file */ + .long 0, 0 + .long 0, 0 + .globl dt_struct_start +dt_struct_start: +_dt_struct_start: + .long OF_DT_BEGIN_NODE + .string "" + .balign 4 + .long OF_DT_PROP + .long 0xa + .long 0x0 + .long 0x536f6d65 + .long 0x4d6f6465 + .short 0x6c00 + .balign 4 + .long OF_DT_PROP + .long 0x8 + .long 0x6 + .long 0x4e6f7468 + .long 0x696e6700 + .balign 4 + .long OF_DT_PROP + .long 0x4 + .long 0x11 + .long 0x2 + .balign 4 + .long OF_DT_PROP + .long 0x4 + .long 0x20 + .long 0x2 + .balign 4 + .long OF_DT_BEGIN_NODE + .string "memory@0" + .balign 4 + .long OF_DT_PROP + .long 0x7 + .long 0x2c + .long 0x6d656d6f + .short 0x7279 + .byte 0x0 + .balign 4 + .long OF_DT_PROP + .long 0x10 + .long 0x38 + .long 0x0 + .long 0x0 + .long 0x0 + .long 0x20000000 + .balign 4 + .long OF_DT_END_NODE + .long OF_DT_BEGIN_NODE + .string "cpus" + .balign 4 + .long OF_DT_PROP + .long 0x4 + .long 0x11 + .long 0x1 + .balign 4 + .long OF_DT_PROP + .long 0x4 + .long 0x20 + .long 0x0 + .balign 4 + .long OF_DT_PROP + .long 0x4 + .long 0x3c + .long 0xa + .balign 4 + .long OF_DT_PROP + .long 0x4 + .long 0x40 + .long 0x17 + .balign 4 + .long OF_DT_PROP + .long 0x4 + .long 0x44 + .long 0x5 + .balign 4 + .long OF_DT_PROP + .long 0x4 + .long 0x49 + .long 0xf + .balign 4 + .long OF_DT_PROP + .long 0x4 + .long 0x4d + .long 0xd00d + .balign 4 + .long OF_DT_PROP + .long 0x10 + .long 0x53 + .long 0x4d2 + .long 0x162e + .long 0x2334 + .long 0xd80 + .balign 4 + .long OF_DT_PROP + .long 0x4 + .long 0x59 + .long 0x0 + .balign 4 + .long OF_DT_PROP + .long 0x4 + .long 0x61 + .long 0xffffffff + .balign 4 + .long OF_DT_PROP + .long 0x4 + .long 0x69 + .long 0x0 + .balign 4 + .long OF_DT_PROP + .long 0x4 + .long 0x71 + .long 0xffffffff + .balign 4 + .long OF_DT_END_NODE + .long OF_DT_END_NODE + .long OF_DT_END + .globl dt_struct_end +dt_struct_end: +_dt_struct_end: + .globl dt_strings_start +dt_strings_start: +_dt_strings_start: + .string "model" + .string "compatible" + .string "#address-cells" + .string "#size-cells" + .string "device_type" + .string "reg" + .string "d10" + .string "d23" + .string "b101" + .string "o17" + .string "hd00d" + .string "stuff" + .string "bad-d-1" + .string "bad-d-2" + .string "bad-o-1" + .string "bad-o-2" + .globl dt_strings_end +dt_strings_end: +_dt_strings_end: + .globl dt_blob_end +dt_blob_end: +_dt_blob_end:
tests/base01.cmd new file +1 -0
@@ -0,0 +1 @@ +dtc -f -b 0 -V 16 -I dts -O asm
tests/base01.dts new file +31 -0
@@ -0,0 +1,31 @@ +/ { + model = "SomeModel"; + compatible = "Nothing"; + #address-cells = <2>; + #size-cells = <2>; + + memory@0 { + device_type = "memory"; + reg = <00000000 00000000 00000000 20000000>; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + d10 = <d# 10>; // hex: 0xa + d23 = <d# 23>; // hex: 0x17 + b101 = <b# 101>; // hex: 0x5 + o17 = <o# 17>; // hex: 0xf + hd00d = <h# d00d>; // hex: 0xd00d + + // hex: 0x4d2 0x163e 0x2334 0xd80 + stuff = <d# 1234 d# 5678 d# 9012 d# 3456>; + + + bad-d-1 = <d# abc123>; // Hrm. 0 + bad-d-2 = <d# 123456789012345>; + bad-o-1 = <o# 891>; + bad-o-2 = <o# 123456123456>; + }; + +};
tests/base01.stderr new file +6 -0
@@ -0,0 +1,6 @@ +DTC: dts->asm on file "tests/base01.dts" +Line 26: Invalid cell value '123456789012345'; -1 assumed +Line 27: Invalid cell value '891'; 0 assumed +Line 28: Invalid cell value '123456123456'; -1 assumed +ERROR: Missing /chosen node +Input tree has errors
tests/test01.asm new file +294 -0
294 lines not on this page · raw message
tests/test01.dts renamed from test.dts +0 -0
tests/test01.stderr new file +4 -0
@@ -0,0 +1,4 @@ +DTC: dts->asm on file "test.dts" +Warning: "linux,boot-cpu" property is deprecated in blob version 2 or higher +Warning: /chosen has no "linux,stdout-path" property +Warning: /chosen has no "interrupt-controller" property
Signature · 1 line
1.5.0.rc3.ge4b0e
Quoted 4 lines · Jon Loeliger
Add the original simple test case and a case with
different based cell values. Correct output asm
files as well as stderr is captured.
Um.. but I dont see any code in run_tests to actually execute the testcase.
Signature · 4 lines
David Gibson | I'll have my music baroque, and my code david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_ | _way_ _around_! http://www.ozlabs.org/~dgibson
So, like, the other day David Gibson mumbled:
Quoted 3 lines
Um.. but I dont see any code in
run_teststo actually execute the testcase.
Right. My comment on the patch was "Wait for it..." :-)
jdl