hwmon/smsc47m192: Document the LPC47M292 as
Subsystems (2)
PATCH 1/1 hwmon/smsc47m192: Document the LPC47M292 as
Subject: hwmon/smsc47m192: Document the LPC47M292 as supported
The new SMSC LPC47M292 Super-I/O chip includes a hardware monitoring block which is compatible with those of the LPC47M192.
Signed-off-by Jean Delvare <khali at linux-fr.org>
--- Documentation/hwmon/smsc47m192 | 7 ++++--- drivers/hwmon/Kconfig | 3 ++- drivers/hwmon/smsc47m192.c | 4 ++-- 3 files changed, 8 insertions(+), 6 deletions(-)
Documentation/hwmon/smsc47m192 +4 -3
@@ -2,12 +2,13 @@ Kernel driver smsc47m192 ============ Supported chips: - * SMSC LPC47M192 and LPC47M997 + * SMSC LPC47M192, LPC47M15x, LPC47M292 and LPC47M997 Prefix: 'smsc47m192' Addresses scanned: I2C 0x2c - 0x2d Datasheet: The datasheet for LPC47M192 is publicly available from http://www.smsc.com/ - The LPC47M997 is compatible for hardware monitoring. + The LPC47M15x, LPC47M292 and LPC47M997 are compatible for + hardware monitoring. Author: Hartmut Rick <linux at rick.claranet.de> Special thanks to Jean Delvare for careful checking
@@ -18,7 +19,7 @@ Description ----------- This driver implements support for the hardware sensor capabilities -of the SMSC LPC47M192 and LPC47M997 Super-I/O chips. +of the SMSC LPC47M192 and compatible Super-I/O chips. These chips support 3 temperature channels and 8 voltage inputs as well as CPU voltage VID input.
drivers/hwmon/Kconfig +2 -1
@@ -437,7 +437,8 @@ config SENSORS_SMSC47M192 select HWMON_VID help If you say yes here you get support for the temperature and - voltage sensors of the SMSC LPC47M192 and LPC47M997 chips. + voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292 + and LPC47M997 chips. The fan monitoring and control capabilities of these chips are supported by another driver, select
drivers/hwmon/smsc47m192.c +2 -2
@@ -1,6 +1,6 @@/* smsc47m192.c - Support for hardware monitoring block of -SMSC LPC47M192 and LPC47M997 Super I/O chips +SMSC LPC47M192 and compatible Super I/O chips Copyright (C) 2006 Hartmut Rick <linux at rick.claranet.de>
@@ -518,7 +518,7 @@ static int smsc47m192_detect(struct i2c_ && (i2c_smbus_read_byte_data(client, SMSC47M192_REG_VID4) & 0xfe) = 0x80) { dev_info(&adapter->dev, - "found SMSC47M192 or SMSC47M997, " + "found SMSC47M192 or compatible, " "version 2, stepping A%d\n", version & 0x0f); } else { dev_dbg(&adapter->dev,
Signature · 1 line
Jean Delvare