Skip to contentSkip to conversation

excite: Set serial driver iotype to UPIO_RM9000

PATCH Applied Thomas Koeller 2 participants 2 messages Feb 23, 2007 MIPS

lore
Share & tools
lore
#0 lore raw

PATCH 2/2 excite: Set serial driver iotype to UPIO_RM9000

---
 arch/mips/basler/excite/excite_setup.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
(quoted diff) +0 -0

b/arch/mips/basler/excite/excite_setup.c
index a1ce458..42f0eda 100644

arch/mips/basler/excite/excite_setup.c +1 -1
@@ -112,7 +112,7 @@ static int __init excite_init_console(void)
 	up.irq		= TITAN_IRQ;
 	up.uartclk	= TITAN_UART_CLK;
 	up.regshift	= 0;
-	up.iotype	= UPIO_MEM32;
+	up.iotype	= UPIO_RM9000;
 	up.type		= PORT_RM9000;
 	up.flags	= UPF_SHARE_IRQ;
 	up.line		= 0;
Signature · 1 line
1.5.0
Applied
#1 lore raw

On Fri, Feb 23, 2007 at 01:39:41AM +0100, Thomas Koeller wrote:

Thanks, applied.

Ralf