Skip to contentSkip to conversation

ata-piix ACPI errors

DISCUSSION Andrew Morton 5 participants 6 messages Feb 23, 2007 – Mar 2, 2007 ACPI

lore
Share & tools
lore
#0 lore raw

I'm starting to think that big acpi merge came a bit too soon.

Begin forwarded message:

Date: Thu, 22 Feb 2007 15:29:42 +0200 (EET)
From: Meelis Roos <[email protected]>
To: Linux Kernel list <[email protected]>
Subject: ata-piix ACPI errors

Testbooted 2.6.21-rc1+todays git on a PC with Intel 845 chipset and PATA HDD. Works fine but I now have these ACPI errors in dmesg, maybe someone is interested:

ata_piix 0000:00:1f.1: version 2.00ac7
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1f.1 to 64
ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15
scsi0 : ata_piix
ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c18edbf8), AE_AML_OPERAND_VALUE ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN0.DRV0._GTF] (Node c18ed608), AE_AML_OPERAND_VALUE ata1.00: ATA-5: ST380021A, 3.19, max UDMA/100
ata1.00: 156301488 sectors, multi 16: LBA
ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c18edbf8), AE_AML_OPERAND_VALUE ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN0.DRV0._GTF] (Node c18ed608), AE_AML_OPERAND_VALUE ata1.00: configured for UDMA/100
scsi1 : ata_piix
ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c18edbf8), AE_AML_OPERAND_VALUE ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN1.DRV0._GTF] (Node c18ed464), AE_AML_OPERAND_VALUE ata2.00: ATAPI, max UDMA/33
ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c18edbf8), AE_AML_OPERAND_VALUE ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN1.DRV0._GTF] (Node c18ed464), AE_AML_OPERAND_VALUE ata2.00: configured for UDMA/33

scsi 0:0:0:0: Direct-Access     ATA      ST380021A        3.19 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM            _NEC     DV-5800B         G9H3 PQ: 0 ANSI: 5
Signature · 6 lines
Meelis Roos ([email protected])
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/
#1 lore raw
Quoted 4 lines · Andrew Morton

I'm starting to think that big acpi merge came a bit too soon.

Begin forwarded message:

Thanks, noted.

Quoted 35 lines

Date: Thu, 22 Feb 2007 15:29:42 +0200 (EET)
From: Meelis Roos <[email protected]>
To: Linux Kernel list <[email protected]>
Subject: ata-piix ACPI errors

Testbooted 2.6.21-rc1+todays git on a PC with Intel 845 chipset and PATA HDD. Works fine but I now have these ACPI errors in dmesg, maybe someone is interested:

ata_piix 0000:00:1f.1: version 2.00ac7
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1f.1 to 64
ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15
scsi0 : ata_piix
ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c18edbf8), AE_AML_OPERAND_VALUE ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN0.DRV0._GTF] (Node c18ed608), AE_AML_OPERAND_VALUE ata1.00: ATA-5: ST380021A, 3.19, max UDMA/100
ata1.00: 156301488 sectors, multi 16: LBA
ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c18edbf8), AE_AML_OPERAND_VALUE ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN0.DRV0._GTF] (Node c18ed608), AE_AML_OPERAND_VALUE ata1.00: configured for UDMA/100
scsi1 : ata_piix
ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c18edbf8), AE_AML_OPERAND_VALUE ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN1.DRV0._GTF] (Node c18ed464), AE_AML_OPERAND_VALUE ata2.00: ATAPI, max UDMA/33
ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c18edbf8), AE_AML_OPERAND_VALUE ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN1.DRV0._GTF] (Node c18ed464), AE_AML_OPERAND_VALUE ata2.00: configured for UDMA/33

Quoted 5 lines
scsi 0:0:0:0: Direct-Access     ATA      ST380021A        3.19 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM            _NEC     DV-5800B         G9H3 PQ: 0 ANSI: 5
Signature · 1 line
Meelis Roos ([email protected])

cu
Adrian

Signature · 4 lines
       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed
#2 lore raw
In reply to Andrew Morton
Quoted 14 lines · Andrew Morton

I'm starting to think that big acpi merge came a bit too soon.

Begin forwarded message:

Date: Thu, 22 Feb 2007 15:29:42 +0200 (EET)
From: Meelis Roos <[email protected]>
To: Linux Kernel list <[email protected]>
Subject: ata-piix ACPI errors

Testbooted 2.6.21-rc1+todays git on a PC with Intel 845 chipset and PATA HDD. Works fine but I now have these ACPI errors in dmesg, maybe someone is interested:

Quoted 8 lines

ata_piix 0000:00:1f.1: version 2.00ac7
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1f.1 to 64
ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15 scsi0 : ata_piix
ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]

I expect this to be ACPI (interpreter) unrelated and the bug should be in drivers/ata/libata-acpi.c.
The problem is that libata-acpi.c calls _GTF function before _STM has been called. This is forbidden by ACPI spec.
The Field is created in _STM. When _GTF is called first, an uninitialized Field is tried to be accessed. ACPI subsystem behaves correctly here.

libata.ata_acpi=0
boot param should workaround the bug?

Related/same bugs:
https://bugzilla.novell.com/show_bug.cgi?id=216853
http://bugzilla.kernel.org/show_bug.cgi?id=7907

Thomas

Quoted 17 lines

ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c18edbf8), AE_AML_OPERAND_VALUE ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN0.DRV0._GTF] (Node c18ed608), AE_AML_OPERAND_VALUE ata1.00: ATA-5: ST380021A, 3.19, max UDMA/100
ata1.00: 156301488 sectors, multi 16: LBA
ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c18edbf8), AE_AML_OPERAND_VALUE ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN0.DRV0._GTF] (Node c18ed608), AE_AML_OPERAND_VALUE ata1.00: configured for UDMA/100
scsi1 : ata_piix
ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c18edbf8), AE_AML_OPERAND_VALUE ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN1.DRV0._GTF] (Node c18ed464), AE_AML_OPERAND_VALUE ata2.00: ATAPI, max UDMA/33
ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c18edbf8), AE_AML_OPERAND_VALUE ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN1.DRV0._GTF] (Node c18ed464), AE_AML_OPERAND_VALUE ata2.00: configured for UDMA/33

Quoted 2 lines
scsi 0:0:0:0: Direct-Access     ATA      ST380021A        3.19 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM            _NEC     DV-5800B         G9H3 PQ: 0 ANSI: 5

Rest are aftereffects/subsequent faults.

#3 lore raw

Hello, Thomas.

Quoted 24 lines · Thomas Renninger
Quoted 14 lines · Andrew Morton

I'm starting to think that big acpi merge came a bit too soon.

Begin forwarded message:

Date: Thu, 22 Feb 2007 15:29:42 +0200 (EET)
From: Meelis Roos <[email protected]>
To: Linux Kernel list <[email protected]>
Subject: ata-piix ACPI errors

Testbooted 2.6.21-rc1+todays git on a PC with Intel 845 chipset and PATA HDD. Works fine but I now have these ACPI errors in dmesg, maybe someone is interested:

Quoted 8 lines

ata_piix 0000:00:1f.1: version 2.00ac7
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1f.1 to 64
ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15 scsi0 : ata_piix
ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]

Quoted 4 lines

I expect this to be ACPI (interpreter) unrelated and the bug should be in drivers/ata/libata-acpi.c.
The problem is that libata-acpi.c calls _GTF function before _STM has been called. This is forbidden by ACPI spec.

I can't find such wording in acpi 3.0a spec. It says _STM may make adjustments to the result of _GTF. Hmmm... the suspend/resume order does specify that _STM should be called before _GTF but nothing seems to mandate use of _GTM and _STM.

I think libata-acpi has several issues here.

1. Missing _GTM/_STM support. This is because mode programming is essential to PATA controllers and we do it in more conventional way (poking PCI / controller registers) regardless of ACPI, so this feature is kind of redundant.

2. Doing _GTF on boot. _GTF is supposed to configure the device as the firmware would have configured it during a normal boot, so we shouldn't be doing it during boot. This too is in gray area as if we're doing kexec, we might want to do _GTF during boot.

It would be the cleanest if _GTF can be modified by but doesn't depend on _STM. Oh, well, there seem to be enough motherboards out there hit by this. I'll cook something up.

Thanks.

Signature · 1 line
tejun
#4 lore raw
Quoted 32 lines · Tejun Heo

Hello, Thomas.

Quoted 24 lines · Thomas Renninger
Quoted 14 lines · Andrew Morton

I'm starting to think that big acpi merge came a bit too soon.

Begin forwarded message:

Date: Thu, 22 Feb 2007 15:29:42 +0200 (EET)
From: Meelis Roos <[email protected]>
To: Linux Kernel list <[email protected]>
Subject: ata-piix ACPI errors

Testbooted 2.6.21-rc1+todays git on a PC with Intel 845 chipset and PATA HDD. Works fine but I now have these ACPI errors in dmesg, maybe someone is interested:

Quoted 8 lines

ata_piix 0000:00:1f.1: version 2.00ac7
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1f.1 to 64
ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15 scsi0 : ata_piix
ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]

Quoted 4 lines

I expect this to be ACPI (interpreter) unrelated and the bug should be in drivers/ata/libata-acpi.c.
The problem is that libata-acpi.c calls _GTF function before _STM has been called. This is forbidden by ACPI spec.

Quoted 4 lines

I can't find such wording in acpi 3.0a spec. It says _STM may make adjustments to the result of _GTF. Hmmm... the suspend/resume order does specify that _STM should be called before _GTF but nothing seems to mandate use of _GTM and _STM.

I also can't find the explicit statement there now.
It seems that the steps described must be processed in the same order as written down there(9.9.2 IDE Controller Device):
Powering up:
• Power up drive (calls _PS0 method if present and turns
on power planes).
• Call _STM passing info from _GTM (possibly modified),
with ID data from each drive.
• Initialize the channel.
• May modify the results of _GTF.
• For each drive: Call _GTF. Execute task file (possibly modified).

Libata subsystem has no choice here as AML code (C&Ped through several BIOSes?) already relies on that.
I put some info of a bug report here to reproduce:
ftp.suse.com/pub/people/trenn/sata_acpi_errors_216853

If you do:
acpiexec DSDT.dat
-> execute \_SB_.PCI0.IDE0.CHN0.DRV0._GTF
you get exactly the error spit out in kernel/dmesg log:
ACPI Error (dsopcode-0601): Attempt to CreateField of length zero [20060912]

If you quit and try again, calling:
-> execute \_SB_.PCI0.IDE0.CHN0._STM 0 0 0
-> execute \_SB_.PCI0.IDE0.CHN0.DRV0._GTF

Everything is fine...

I looked a bit at the asl code:
At end of _STM "Store (GTF (0x00, Arg1), ATA0)" (not _GTF!, GTF is just a helper function) is called.
ATA0 gets filled here and is the field that is later used in _GTF which throws an error in the called RATA func, if ATA0 has not been filled yet.

It's not that easy and a bit difficult to put in words...

Quoted 7 lines

I think libata-acpi has several issues here.

1. Missing _GTM/_STM support. This is because mode programming is essential to PATA controllers and we do it in more conventional way (poking PCI / controller registers) regardless of ACPI, so this feature is kind of redundant.

Ok, that is the problem.
If using _GTF you won't come around also using _STM/_GTM. We already have libata-acpi patches in our 2.6.16 kernel which have _STM/_GTM support.
AFAIK those come from Hannes who also posted this some time ago (to some ide-xy mailinglist, don't know)?
You may want to wait for his answer, there already exist stuff doing this and as code is in our kernels it also should be rather well tested...

Thomas

Quoted 8 lines

2. Doing _GTF on boot. _GTF is supposed to configure the device as the firmware would have configured it during a normal boot, so we shouldn't be doing it during boot. This too is in gray area as if we're doing kexec, we might want to do _GTF during boot.

It would be the cleanest if _GTF can be modified by but doesn't depend on _STM. Oh, well, there seem to be enough motherboards out there hit by this. I'll cook something up.

-
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#5 lore raw

Here is the key phrase from the ACPI spec. It is not perfectly clear, but it is my understanding that the meaning is that _GTF can only be called after _STM has been called.

Bob

9.9.1.1 _GTF (Get Task File)
...

This Control Method is listed under each drive device object. _GTF must be called after calling _STM.

Quoted 6 lines

-----Original Message-----
From: [email protected] [mailto:linux-acpi- [email protected]] On Behalf Of Thomas Renninger
Sent: Thursday, March 01, 2007 1:58 AM
To: Tejun Heo
Cc: Andrew Morton; [email protected]; Meelis Roos; Adrian

Bunk;

Quoted 19 lines

Hannes Reinecke
Subject: Re: Fw: ata-piix ACPI errors

Quoted 15 lines · Tejun Heo

Hello, Thomas.

Quoted 12 lines · Thomas Renninger
Quoted 11 lines · Andrew Morton

I'm starting to think that big acpi merge came a bit too soon.

Begin forwarded message:

Date: Thu, 22 Feb 2007 15:29:42 +0200 (EET)
From: Meelis Roos <[email protected]>
To: Linux Kernel list <[email protected]>
Subject: ata-piix ACPI errors

Testbooted 2.6.21-rc1+todays git on a PC with Intel 845 chipset

and

Quoted 8 lines

PATA

Quoted 1 line
Quoted 1 line
Quoted 1 line

HDD. Works fine but I now have these ACPI errors in dmesg, maybe

someone

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines

is interested:

ata_piix 0000:00:1f.1: version 2.00ac7
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ

18

Quoted 10 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

PCI: Setting latency timer of device 0000:00:1f.1 to 64
ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma

0x0001ffa0 irq 14

Quoted 1 line
Quoted 1 line
Quoted 1 line

ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma

0x0001ffa8 irq 15

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

scsi0 : ata_piix
ACPI Error (dsopcode-0481): Attempt to CreateField of length zero

[20070126]

Quoted 2 lines
Quoted 2 lines

I expect this to be ACPI (interpreter) unrelated and the bug

should be

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

in drivers/ata/libata-acpi.c.
The problem is that libata-acpi.c calls _GTF function before _STM

has

Quoted 5 lines
Quoted 5 lines
Quoted 1 line

been called. This is forbidden by ACPI spec.

I can't find such wording in acpi 3.0a spec. It says _STM may make adjustments to the result of _GTF. Hmmm... the suspend/resume order does specify that _STM should be called before _GTF but nothing

seems to

Quoted 3 lines
Quoted 1 line

mandate use of _GTM and _STM.

I also can't find the explicit statement there now.
It seems that the steps described must be processed in the same order

as

Quoted 22 lines

written down there(9.9.2 IDE Controller Device):
Powering up:
* Power up drive (calls _PS0 method if present and turns on power planes).
* Call _STM passing info from _GTM (possibly modified), with ID data from each drive.
* Initialize the channel.
* May modify the results of _GTF.
* For each drive: Call _GTF. Execute task file (possibly modified).

Libata subsystem has no choice here as AML code (C&Ped through several BIOSes?) already relies on that.
I put some info of a bug report here to reproduce:
ftp.suse.com/pub/people/trenn/sata_acpi_errors_216853

If you do:
acpiexec DSDT.dat
-> execute \_SB_.PCI0.IDE0.CHN0.DRV0._GTF
you get exactly the error spit out in kernel/dmesg log:
ACPI Error (dsopcode-0601): Attempt to CreateField of length zero [20060912]

Quoted 8 lines

If you quit and try again, calling:
-> execute \_SB_.PCI0.IDE0.CHN0._STM 0 0 0
-> execute \_SB_.PCI0.IDE0.CHN0.DRV0._GTF

Everything is fine...

I looked a bit at the asl code:
At end of _STM "Store (GTF (0x00, Arg1), ATA0)" (not _GTF!, GTF is

just

Quoted 2 lines

a helper function) is called.
ATA0 gets filled here and is the field that is later used in _GTF

which

Quoted 11 lines

throws an error in the called RATA func, if ATA0 has not been filled yet.

It's not that easy and a bit difficult to put in words...

Quoted 6 lines

I think libata-acpi has several issues here.

1. Missing _GTM/_STM support. This is because mode programming is essential to PATA controllers and we do it in more conventional way (poking PCI / controller registers) regardless of ACPI, so this

feature

Quoted 12 lines
Quoted 1 line

is kind of redundant.

Ok, that is the problem.
If using _GTF you won't come around also using _STM/_GTM. We already have libata-acpi patches in our 2.6.16 kernel which have _STM/_GTM support.
AFAIK those come from Hannes who also posted this some time ago (to some ide-xy mailinglist, don't know)?
You may want to wait for his answer, there already exist stuff doing this and as code is in our kernels it also should be rather well tested...

Quoted 5 lines

Thomas

Quoted 1 line

2. Doing _GTF on boot. _GTF is supposed to configure the device as

the

Quoted 1 line
Quoted 1 line

firmware would have configured it during a normal boot, so we

shouldn't

Quoted 4 lines
Quoted 4 lines

be doing it during boot. This too is in gray area as if we're doing kexec, we might want to do _GTF during boot.

It would be the cleanest if _GTF can be modified by but doesn't

depend

Quoted 1 line
Quoted 1 line

on _STM. Oh, well, there seem to be enough motherboards out there

hit

Quoted 5 lines
Quoted 1 line

by this. I'll cook something up.

-
To unsubscribe from this list: send the line "unsubscribe linux-acpi"

in

Quoted 2 lines

the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html