2.6.19-stable review
Subsystems (10)
cover 2.6.19-stable review
This is the start of the stable review cycle for the 2.6.19.6 release.
This will probably be the last release of the 2.6.19-stable series, so if there are patches that you feel should be applied to that tree, please let me know.
There are 9 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let us know. If anyone is a maintainer of the proper subsystem, and wants to add a Signed-off-by: line to the patch, please respond with it.
These patches are sent out with a number of different people on the Cc:
line. If you wish to be a reviewer, please email [email protected] to add your name to the list. If you want to be off the reviewer list, also email us.
Responses should be made by Thursday March 1 00:00 UTC. Anything received after that time might be too late.
The whole patch set can be downloaded at:
kernel.org/pub/linux/kernel/v2.6/testing/patch-2.6.19.6-rc1.gz
thanks,
the -stable release team
PATCH 1/9 fix umask when noACL kernel meets extN tuned for ACLs
-stable review patch. If anyone has any objections, please let us know.
------------------
From: Hugh Dickins <[email protected]>
Fix insecure default behaviour reported by Tigran Aivazian: if an ext2 or ext3 or ext4 filesystem is tuned to mount with "acl", but mounted by a kernel built without ACL support, then umask was ignored when creating inodes - though root or user has umask 022, touch creates files as 0666, and mkdir creates directories as 0777.
This appears to have worked right until 2.6.11, when a fix to the default mode on symlinks (always 0777) assumed VFS applies umask: which it does, unless the mount is marked for ACLs; but ext[234] set MS_POSIXACL in s_flags according to s_mount_opt set according to def_mount_opts.
We could revert to the 2.6.10 ext[234]_init_acl (adding an S_ISLNK test); but other filesystems only set MS_POSIXACL when ACLs are configured. We could fix this at another level; but it seems most robust to avoid setting the s_mount_opt flag in the first place (at the expense of more ifdefs).
Likewise don't set the XATTR_USER flag when built without XATTR support.
--- fs/ext2/super.c | 4 ++++ fs/ext3/super.c | 4 ++++ fs/ext4/super.c | 4 ++++ 3 files changed, 12 insertions(+)
fs/ext2/super.c +4 -0
@@ -710,10 +710,14 @@ static int ext2_fill_super(struct super_set_opt (sbi->s_mount_opt,GRPID );if (def_mount_opts &EXT2_DEFM_UID16 )set_opt (sbi->s_mount_opt,NO_UID32 ); +#ifdef CONFIG_EXT2_FS_XATTR if (def_mount_opts &EXT2_DEFM_XATTR_USER )set_opt (sbi->s_mount_opt,XATTR_USER ); +#endif +#ifdef CONFIG_EXT2_FS_POSIX_ACL if (def_mount_opts &EXT2_DEFM_ACL )set_opt (sbi->s_mount_opt,POSIX_ACL ); +#endif if (le16_to_cpu (sbi->s_es->s_errors) ==EXT2_ERRORS_PANIC )set_opt (sbi->s_mount_opt,ERRORS_PANIC );
fs/ext3/super.c +4 -0
@@ -1455,10 +1455,14 @@ static int ext3_fill_super (struct superset_opt (sbi->s_mount_opt,GRPID );if (def_mount_opts &EXT3_DEFM_UID16 )set_opt (sbi->s_mount_opt,NO_UID32 ); +#ifdef CONFIG_EXT3_FS_XATTR if (def_mount_opts &EXT3_DEFM_XATTR_USER )set_opt (sbi->s_mount_opt,XATTR_USER ); +#endif +#ifdef CONFIG_EXT3_FS_POSIX_ACL if (def_mount_opts &EXT3_DEFM_ACL )set_opt (sbi->s_mount_opt,POSIX_ACL ); +#endif if ((def_mount_opts &EXT3_DEFM_JMODE ) ==EXT3_DEFM_JMODE_DATA ) sbi->s_mount_opt |=EXT3_MOUNT_JOURNAL_DATA ;else if ((def_mount_opts &EXT3_DEFM_JMODE ) ==EXT3_DEFM_JMODE_ORDERED )
fs/ext4/super.c +4 -0
@@ -1512,10 +1512,14 @@ static int ext4_fill_super (struct superset_opt (sbi->s_mount_opt,GRPID );if (def_mount_opts &EXT4_DEFM_UID16 )set_opt (sbi->s_mount_opt,NO_UID32 ); +#ifdef CONFIG_EXT4DEV_FS_XATTR if (def_mount_opts &EXT4_DEFM_XATTR_USER )set_opt (sbi->s_mount_opt,XATTR_USER ); +#endif +#ifdef CONFIG_EXT4DEV_FS_POSIX_ACL if (def_mount_opts &EXT4_DEFM_ACL )set_opt (sbi->s_mount_opt,POSIX_ACL ); +#endif if ((def_mount_opts &EXT4_DEFM_JMODE ) ==EXT4_DEFM_JMODE_DATA ) sbi->s_mount_opt |=EXT4_MOUNT_JOURNAL_DATA ;else if ((def_mount_opts &EXT4_DEFM_JMODE ) ==EXT4_DEFM_JMODE_ORDERED )
--
Re: [patch 1/9] fix umask when noACL kernel meets extN tuned for ACLs
Quoted 1 line · Greg KH
-stable review patch. If anyone has any objections, please let us know.
Should be fine.
Thanks,
Andreas
PATCH 2/9 Backport of psmouse suspend/shutdown cleanups
In reply to Greg KH-stable review patch. If anyone has any objections, please let us know.
------------------
From: Thomas Renninger <[email protected]>
This patch works back to 2.6.17 (earlier kernels seem to need up/down operations on mutex/semaphore).
psmouse - properly reset mouse on shutdown/suspend
Some people report that they need psmouse module unloaded for suspend to ram/disk to work properly. Let's make port cleanup behave the same way as driver unload.
This fixes "bad state" problem on various HP laptops, such as nx7400.
--- drivers/input/mouse/psmouse-base.c | 28 ++++++++++++++++++++++++++++ drivers/input/mouse/psmouse.h | 1 + drivers/input/mouse/synaptics.c | 1 + 3 files changed, 30 insertions(+)
drivers/input/mouse/psmouse-base.c +28 -0
@@ -986,8 +986,36 @@ static void psmouse_resync(void *p)static void psmouse_cleanup (struct serio *serio) {struct psmouse *psmouse =serio_get_drvdata (serio); +struct psmouse *parent =NULL ; + +mutex_lock (&psmouse_mutex); + +if (serio->parent && serio->id.type ==SERIO_PS_PSTHRU ) { + parent =serio_get_drvdata (serio->parent); +psmouse_deactivate (parent); + } + +psmouse_deactivate (psmouse); + +if (psmouse->cleanup) + psmouse->cleanup (psmouse);psmouse_reset (psmouse); + +/* +* Some boxes, such as HP nx7400, get terribly confused if mouse +* is not fully enabled before suspending/shutting down. +*/ +ps2_command (&psmouse->ps2dev,NULL ,PSMOUSE_CMD_ENABLE ); + +if (parent) { +if (parent->pt_deactivate) + parent->pt_deactivate (parent); + +psmouse_activate (parent); + } + +mutex_unlock (&psmouse_mutex); }/*
drivers/input/mouse/psmouse.h +1 -0
@@ -68,6 +68,7 @@ struct psmouse {int (*reconnect)(struct psmouse *psmouse);void (*disconnect)(struct psmouse *psmouse); +void (*cleanup)(struct psmouse *psmouse);int (*poll)(struct psmouse *psmouse);void (*pt_activate)(struct psmouse *psmouse);
drivers/input/mouse/synaptics.c +1 -0
@@ -652,6 +652,7 @@ int synaptics_init(struct psmouse *psmou psmouse->set_rate = synaptics_set_rate; psmouse->disconnect = synaptics_disconnect; psmouse->reconnect = synaptics_reconnect; + psmouse->cleanup = synaptics_reset; psmouse->pktsize =6 ;/* Synaptics can usually stay in sync without extra help */ psmouse->resync_time =0 ;
--
PATCH 3/9 fix memory corruption from misinterpreted bad_inode_ops return values (CVE-2006-5753)
In reply to Greg KH-stable review patch. If anyone has any objections, please let us know.
------------------
From: Eric Sandeen <[email protected]>
CVE-2006-5753 is for a case where an inode can be marked bad, switching the ops to bad_inode_ops, which are all connected as:
static int return_EIO(void)
{
return -EIO;
}#define EIO_ERROR ((void *) (return_EIO))
static struct inode_operations bad_inode_ops =
{
.create = bad_inode_create
...etc...
The problem here is that the void cast causes return types to not be promoted, and for ops such as listxattr which expect more than 32 bits of return value, the 32-bit -EIO is interpreted as a large positive 64-bit number, i.e. 0x00000000fffffffa instead of 0xfffffffa.
This goes particularly badly when the return value is taken as a number of bytes to copy into, say, a user's buffer for example...
I originally had coded up the fix by creating a return_EIO_<TYPE> macro for each return type, like this:
static int return_EIO_int(void)
{
return -EIO;
}#define EIO_ERROR_INT ((void *) (return_EIO_int))
static struct inode_operations bad_inode_ops =
{
.create = EIO_ERROR_INT,...etc...
but Al felt that it was probably better to create an EIO-returner for each actual op signature. Since so few ops share a signature, I just went ahead & created an EIO function for each individual file & inode op that returns a value.
--- fs/bad_inode.c | 330 +++++++++++++++++++++++++++++++++++++++++++++++++-------- 1 file changed, 289 insertions(+), 41 deletions(-)
fs/bad_inode.c +289 -41
@@ -14,59 +14,307 @@#include <linux/time.h> #include <linux/smp_lock.h> #include <linux/namei.h> +#include <linux/poll.h> -static int return_EIO (void ) + +static loff_t bad_file_llseek (struct file *file,loff_t offset,int origin) +{ +return -EIO ; +} + +static ssize_t bad_file_read (struct file *filp,char __user *buf, +size_t size,loff_t *ppos) +{ +return -EIO ; +} + +static ssize_t bad_file_write (struct file *filp,const char __user *buf, +size_t siz,loff_t *ppos) +{ +return -EIO ; +} + +static ssize_t bad_file_aio_read (struct kiocb *iocb,const struct iovec *iov, +unsigned long nr_segs,loff_t pos) +{ +return -EIO ; +} + +static ssize_t bad_file_aio_write (struct kiocb *iocb,const struct iovec *iov, +unsigned long nr_segs,loff_t pos) +{ +return -EIO ; +} + +static int bad_file_readdir (struct file *filp,void *dirent,filldir_t filldir) +{ +return -EIO ; +} + +static unsigned int bad_file_poll (struct file *filp,poll_table *wait) +{ +return POLLERR ; +} + +static int bad_file_ioctl (struct inode *inode,struct file *filp, +unsigned int cmd,unsigned long arg) +{ +return -EIO ; +} + +static long bad_file_unlocked_ioctl (struct file *file,unsigned cmd, +unsigned long arg) +{ +return -EIO ; +} + +static long bad_file_compat_ioctl (struct file *file,unsigned int cmd, +unsigned long arg) +{ +return -EIO ; +} + +static int bad_file_mmap (struct file *file,struct vm_area_struct *vma) +{ +return -EIO ; +} + +static int bad_file_open (struct inode *inode,struct file *filp) +{ +return -EIO ; +} + +static int bad_file_flush (struct file *file,fl_owner_t id) +{ +return -EIO ; +} + +static int bad_file_release (struct inode *inode,struct file *filp) +{ +return -EIO ; +} + +static int bad_file_fsync (struct file *file,struct dentry *dentry, +int datasync) +{ +return -EIO ; +} + +static int bad_file_aio_fsync (struct kiocb *iocb,int datasync) +{ +return -EIO ; +} + +static int bad_file_fasync (int fd,struct file *filp,int on) +{ +return -EIO ; +} + +static int bad_file_lock (struct file *file,int cmd,struct file_lock *fl) +{ +return -EIO ; +} + +static ssize_t bad_file_sendfile (struct file *in_file,loff_t *ppos, +size_t count,read_actor_t actor,void *target) +{ +return -EIO ; +} + +static ssize_t bad_file_sendpage (struct file *file,struct page *page, +int off,size_t len,loff_t *pos,int more) +{ +return -EIO ; +} + +static unsigned long bad_file_get_unmapped_area (struct file *file, +unsigned long addr,unsigned long len, +unsigned long pgoff,unsigned long flags) +{ +return -EIO ; +} + +static int bad_file_check_flags (int flags) {return -EIO ; } -#define EIO_ERROR ((void *) (return_EIO)) +static int bad_file_dir_notify (struct file *file,unsigned long arg) +{ +return -EIO ; +} + +static int bad_file_flock (struct file *filp,int cmd,struct file_lock *fl) +{ +return -EIO ; +} + +static ssize_t bad_file_splice_write (struct pipe_inode_info *pipe, +struct file *out,loff_t *ppos,size_t len, +unsigned int flags) +{ +return -EIO ; +} + +static ssize_t bad_file_splice_read (struct file *in,loff_t *ppos, +struct pipe_inode_info *pipe,size_t len, +unsigned int flags) +{ +return -EIO ; +}static const struct file_operations bad_file_ops = { - .llseek =EIO_ERROR , - .aio_read =EIO_ERROR , - .read =EIO_ERROR , - .write =EIO_ERROR , - .aio_write =EIO_ERROR , - .readdir =EIO_ERROR , - .poll =EIO_ERROR , - .ioctl =EIO_ERROR , - .mmap =EIO_ERROR , - .open =EIO_ERROR , - .flush =EIO_ERROR , - .release =EIO_ERROR , - .fsync =EIO_ERROR , - .aio_fsync =EIO_ERROR , - .fasync =EIO_ERROR , - .lock =EIO_ERROR , - .sendfile =EIO_ERROR , - .sendpage =EIO_ERROR , - .get_unmapped_area =EIO_ERROR , + .llseek = bad_file_llseek, + .read = bad_file_read, + .write = bad_file_write, + .aio_read = bad_file_aio_read, + .aio_write = bad_file_aio_write, + .readdir = bad_file_readdir, + .poll = bad_file_poll, + .ioctl = bad_file_ioctl, + .unlocked_ioctl = bad_file_unlocked_ioctl, + .compat_ioctl = bad_file_compat_ioctl, + .mmap = bad_file_mmap, + .open = bad_file_open, + .flush = bad_file_flush, + .release = bad_file_release, + .fsync = bad_file_fsync, + .aio_fsync = bad_file_aio_fsync, + .fasync = bad_file_fasync, + .lock = bad_file_lock, + .sendfile = bad_file_sendfile, + .sendpage = bad_file_sendpage, + .get_unmapped_area = bad_file_get_unmapped_area, + .check_flags = bad_file_check_flags, + .dir_notify = bad_file_dir_notify, + .flock = bad_file_flock, + .splice_write = bad_file_splice_write, + .splice_read = bad_file_splice_read, }; +static int bad_inode_create (struct inode *dir,struct dentry *dentry, +int mode,struct nameidata *nd) +{ +return -EIO ; +} + +static struct dentry *bad_inode_lookup (struct inode *dir, +struct dentry *dentry,struct nameidata *nd) +{ +return ERR_PTR (-EIO ); +} + +static int bad_inode_link (struct dentry *old_dentry,struct inode *dir, +struct dentry *dentry) +{ +return -EIO ; +} + +static int bad_inode_unlink (struct inode *dir,struct dentry *dentry) +{ +return -EIO ; +} + +static int bad_inode_symlink (struct inode *dir,struct dentry *dentry, +const char *symname) +{ +return -EIO ; +} + +static int bad_inode_mkdir (struct inode *dir,struct dentry *dentry, +int mode) +{ +return -EIO ; +} + +static int bad_inode_rmdir (struct inode *dir,struct dentry *dentry) +{ +return -EIO ; +} + +static int bad_inode_mknod (struct inode *dir,struct dentry *dentry, +int mode,dev_t rdev) +{ +return -EIO ; +} + +static int bad_inode_rename (struct inode *old_dir,struct dentry *old_dentry, +struct inode *new_dir,struct dentry *new_dentry) +{ +return -EIO ; +} + +static int bad_inode_readlink (struct dentry *dentry,char __user *buffer, +int buflen) +{ +return -EIO ; +} + +static int bad_inode_permission (struct inode *inode,int mask, +struct nameidata *nd) +{ +return -EIO ; +} + +static int bad_inode_getattr (struct vfsmount *mnt,struct dentry *dentry, +struct kstat *stat) +{ +return -EIO ; +} + +static int bad_inode_setattr (struct dentry *direntry,struct iattr *attrs) +{ +return -EIO ; +} + +static int bad_inode_setxattr (struct dentry *dentry,const char *name, +const void *value,size_t size,int flags) +{ +return -EIO ; +} + +static ssize_t bad_inode_getxattr (struct dentry *dentry,const char *name, +void *buffer,size_t size) +{ +return -EIO ; +} + +static ssize_t bad_inode_listxattr (struct dentry *dentry,char *buffer, +size_t buffer_size) +{ +return -EIO ; +} + +static int bad_inode_removexattr (struct dentry *dentry,const char *name) +{ +return -EIO ; +} +static struct inode_operations bad_inode_ops = { - .create =EIO_ERROR , - .lookup =EIO_ERROR , - .link =EIO_ERROR , - .unlink =EIO_ERROR , - .symlink =EIO_ERROR , - .mkdir =EIO_ERROR , - .rmdir =EIO_ERROR , - .mknod =EIO_ERROR , - .rename =EIO_ERROR , - .readlink =EIO_ERROR , + .create = bad_inode_create, + .lookup = bad_inode_lookup, + .link = bad_inode_link, + .unlink = bad_inode_unlink, + .symlink = bad_inode_symlink, + .mkdir = bad_inode_mkdir, + .rmdir = bad_inode_rmdir, + .mknod = bad_inode_mknod, + .rename = bad_inode_rename, + .readlink = bad_inode_readlink,/* follow_link must be no-op, otherwise unmounting this inode won't work */ - .truncate =EIO_ERROR , - .permission =EIO_ERROR , - .getattr =EIO_ERROR , - .setattr =EIO_ERROR , - .setxattr =EIO_ERROR , - .getxattr =EIO_ERROR , - .listxattr =EIO_ERROR , - .removexattr =EIO_ERROR , +/* put_link returns void */ +/* truncate returns void */ + .permission = bad_inode_permission, + .getattr = bad_inode_getattr, + .setattr = bad_inode_setattr, + .setxattr = bad_inode_setxattr, + .getxattr = bad_inode_getxattr, + .listxattr = bad_inode_listxattr, + .removexattr = bad_inode_removexattr, +/* truncate_range returns void */ };
@@ -88,7 +336,7 @@ static struct inode_operations bad_inode* on it to fail from this point on. */ -void make_bad_inode (struct inode * inode) +void make_bad_inode (struct inode *inode) {remove_inode_hash (inode);
@@ -113,7 +361,7 @@ EXPORT_SYMBOL(make_bad_inode);* Returns true if the inode in question has been marked as bad. */ -int is_bad_inode (struct inode * inode) +int is_bad_inode (struct inode *inode) {return (inode->i_op == &bad_inode_ops); }
--
PATCH 4/9 netpoll: drivers must not enable IRQ unconditionally in their NAPI handler
In reply to Greg KH-stable review patch. If anyone has any objections, please let us know.
------------------
From: Francois Romieu <[email protected]>
netpoll: drivers must not enable IRQ unconditionally in their NAPI handler
net/core/netpoll.c::netpoll_send_skb() calls the poll handler when it is available. As netconsole can be used from almost any context, IRQ must not be enabled blindly in the NAPI handler of a driver which supports netpoll.
b57bd06655a028aba7b92e1c19c2093e7fcfb341 fixed the issue for the 8139too.c driver.
--- drivers/net/8139cp.c | 6 ++++-- drivers/net/b44.c | 6 ++++-- drivers/net/forcedeth.c | 11 +++++++---- drivers/net/skge.c | 5 +++-- 4 files changed, 18 insertions(+), 10 deletions(-)
drivers/net/8139cp.c +4 -2
@@ -617,13 +617,15 @@ rx_next:* this round of polling */ if (rx_work) { +unsigned long flags; +if (cpr16 (IntrStatus) & cp_rx_intr_mask) goto rx_status_loop; -local_irq_disable (); +local_irq_save (flags);cpw16_f (IntrMask, cp_intr_mask);__netif_rx_complete (dev); -local_irq_enable (); +local_irq_restore (flags);return 0 ;/* done */ }
drivers/net/b44.c +4 -2
@@ -879,12 +879,14 @@ static int b44_poll(struct net_device *n }if (bp->istat &ISTAT_ERRORS ) { -spin_lock_irq (&bp->lock); +unsigned long flags; + +spin_lock_irqsave (&bp->lock, flags);b44_halt (bp);b44_init_rings (bp);b44_init_hw (bp,1 );netif_wake_queue (bp->dev); -spin_unlock_irq (&bp->lock); +spin_unlock_irqrestore (&bp->lock, flags); done =1 ; }
drivers/net/forcedeth.c +7 -4
@@ -2544,14 +2544,15 @@ static int nv_napi_poll(struct net_devicint pkts, limit =min (*budget, dev->quota);struct fe_priv *np =netdev_priv (dev);u8 __iomem *base =get_hwbase (dev); +unsigned long flags; pkts =nv_rx_process (dev, limit);if (nv_alloc_rx (dev)) { -spin_lock_irq (&np->lock); +spin_lock_irqsave (&np->lock, flags);if (!np->in_shutdown)mod_timer (&np->oom_kick, jiffies +OOM_REFILL ); -spin_unlock_irq (&np->lock); +spin_unlock_irqrestore (&np->lock, flags); }if (pkts < limit) {
@@ -2559,13 +2560,15 @@ static int nv_napi_poll(struct net_devicnetif_rx_complete (dev);/* re-enable receive interrupts */ -spin_lock_irq (&np->lock); +spin_lock_irqsave (&np->lock, flags); + np->irqmask |=NVREG_IRQ_RX_ALL ;if (np->msi_flags &NV_MSI_X_ENABLED )writel (NVREG_IRQ_RX_ALL , base + NvRegIrqMask);else writel (np->irqmask, base + NvRegIrqMask); -spin_unlock_irq (&np->lock); + +spin_unlock_irqrestore (&np->lock, flags);return 0 ; }else {/* used up our quantum, so reschedule */
drivers/net/skge.c +3 -2
@@ -2919,6 +2919,7 @@ static int skge_poll(struct net_device *struct skge_hw *hw = skge->hw;struct skge_ring *ring = &skge->rx_ring;struct skge_element *e; +unsigned long flags;int to_do =min (dev->quota, *budget);int work_done =0 ;
@@ -2956,12 +2957,12 @@ static int skge_poll(struct net_device *if (work_done >= to_do)return 1 ;/* not done */ -spin_lock_irq (&hw->hw_lock); +spin_lock_irqsave (&hw->hw_lock, flags);__netif_rx_complete (dev); hw->intr_mask |= irqmask[skge->port];skge_write32 (hw,B0_IMSK , hw->intr_mask);skge_read32 (hw,B0_IMSK ); -spin_unlock_irq (&hw->hw_lock); +spin_unlock_irqrestore (&hw->hw_lock, flags);return 0 ; }
--
PATCH 5/9 hda-intel - Dont try to probe invalid codecs
In reply to Greg KH-stable review patch. If anyone has any objections, please let us know.
------------------
From: Takashi Iwai <[email protected]>
[ALSA] hda-intel - Don't try to probe invalid codecs
Fix the max number of codecs detected by HD-intel (and compatible) controllers to 3. Some hardware reports extra bits as if connected, and the driver gets confused to probe unexisting codecs.
--- sound/pci/hda/hda_intel.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
sound/pci/hda/hda_intel.c +1 -1
@@ -198,7 +198,7 @@ enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO/* STATESTS int mask: SD2,SD1,SD0 */ #define STATESTS_INT_MASK 0x07 -#define AZX_MAX_CODECS 4 +#define AZX_MAX_CODECS 3/* SD_CTL bits */ #define SD_CTL_STREAM_RESET 0x01/* stream reset bit */
--
PATCH 6/9 Fix oops when Windows server sent bad domain name null terminator
In reply to Greg KH-stable review patch. If anyone has any objections, please let us know.
------------------
From: Steve French <[email protected]>
[CIFS] Fix oops when Windows server sent bad domain name null terminator
Fixes RedHat bug 211672
Windows sends one byte (instead of two) of null to terminate final Unicode string (domain name) in session setup response in some cases - this caused cifs to misalign some informational strings (making it hard to convert from UCS16 to UTF8).
Thanks to Shaggy for his help and Akemi Yagi for debugging/testing
--- fs/cifs/sess.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-)
fs/cifs/sess.c +8 -5
@@ -182,11 +182,14 @@ static int decode_unicode_ssetup(char **cFYI (1 ,("bleft %d" ,bleft)); -/* word align, if bytes remaining is not even */ -if (bleft %2 ) { - bleft--; - data++; - } +/* SMB header is unaligned, so cifs servers word align start of +Unicode strings */ + data++; + bleft--;/* Windows servers do not always double null terminate +their final Unicode string - in which case we +now will not attempt to decode the byte of junk +which follows it */ + words_left = bleft /2 ;/* save off server operating system */
--
PATCH 7/9 USB: usbnet driver bugfix
In reply to Greg KH-stable review patch. If anyone has any objections, please let us know.
------------------
From: David Brownell <[email protected]>
The attached fixes an oops in the usbnet driver. The same patch is in 2.6.21-rc1, but that one has many whitespace changes. This is much smaller.
--- drivers/usb/net/usbnet.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
drivers/usb/net/usbnet.c +5 -2
@@ -1181,6 +1181,9 @@ usbnet_probe (struct usb_interface *udev// NOTE net->name still not usable ... if (info->bind) { status = info->bind (dev, udev); +if (status <0 ) + goto out1; +// heuristic: "usb%d" for links we know are two-host, // else "eth%d" when there's reasonable doubt. userspace // can rename the link if it knows better.
@@ -1207,12 +1210,12 @@ usbnet_probe (struct usb_interface *udevif (status ==0 && dev->status) status =init_status (dev, udev);if (status <0 ) - goto out1; + goto out3;if (!dev->rx_urb_size) dev->rx_urb_size = dev->hard_mtu; dev->maxpacket =usb_maxpacket (dev->udev, dev->out,1 ); - +SET_NETDEV_DEV (net, &udev->dev); status =register_netdev (net);if (status)
--
PATCH 8/9 hda-codec - Dont return error at initialization of modem codec
In reply to Greg KH-stable review patch. If anyone has any objections, please let us know.
------------------
From: Takashi Iwai <[email protected]>
[ALSA] hda-codec - Don't return error at initialization of modem codec
Some modem codec seem to fail in the initialization, and this stopped loading of the whole module although the audio is OK. Since it's usually a non-fatal issue, the driver tries to proceed to initialize now.
--- sound/pci/hda/patch_si3054.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
sound/pci/hda/patch_si3054.c +2 -1
@@ -243,7 +243,8 @@ static int si3054_init(struct hda_codecif ((val&SI3054_MEI_READY ) !=SI3054_MEI_READY ) {snd_printk (KERN_ERR "si3054: cannot initialize. EXT MID = %04x\n" , val); -return -EACCES ; +/* let's pray that this is no fatal error */ +/* return -EACCES; */ }SET_REG (codec,SI3054_GPIO_POLARITY ,0xffff );
--
PATCH 9/9 Missing critical phys_to_virt in lib/swiotlb.c
In reply to Greg KH-stable review patch. If anyone has any objections, please let us know.
------------------
From: David Moore <[email protected]>
Adds missing call to phys_to_virt() in the lib/swiotlb.c:swiotlb_sync_sg() function. Without this change, a kernel panic will always occur whenever a SWIOTLB bounce buffer from a scatter-gather list gets synced.
--- lib/swiotlb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
lib/swiotlb.c +1 -1
@@ -750,7 +750,7 @@ swiotlb_sync_sg(struct device *hwdev, stfor (i =0 ; i < nelems; i++, sg++)if (sg->dma_address !=SG_ENT_PHYS_ADDRESS (sg)) -sync_single (hwdev, (void *) sg->dma_address, +sync_single (hwdev,phys_to_virt (sg->dma_address), sg->dma_length, dir, target); }
--
Re: [patch 0/9] 2.6.19-stable review (mmc: Power quirk for ENE controllers)
In reply to Greg KHCould you add this patch (which is in 2.6.21-rc1) to the queues for 2.6.19.6 and 2.6.20.2 and, if it's ever to be released, 2.6.18.9? (There's one trivially-fixable reject against 2.6.18, but it's otherwise fine with all three.)
mmc: Power quirk for ENE controllers
Support for these devices was broken for 2.6.18-rc1 and later by commit 146ad66eac836c0b976c98f428d73e1f6a75270d, which added voltage level support.
This restores the previous behaviour for these devices by ensuring that when the voltage is changed, only one write to set the voltage is performed.
It may be that both writes are needed if the voltage is being changed between two non-zero values or that it's safe to ensure that only one write is done if the hardware only supports one voltage; I don't know whether either is the case nor can I test since I have only the one SD reader (1524:0550), and it supports just the one voltage.
---
drivers/mmc/sdhci.c +19 -3
@@ -37,6 +37,7 @@ static unsigned int debug_quirks = 0;#define SDHCI_QUIRK_FORCE_DMA (1<<1)/* Controller doesn't like some resets when there is no card inserted. */ #define SDHCI_QUIRK_NO_CARD_NO_RESET (1<<2) +#define SDHCI_QUIRK_SINGLE_POWER_WRITE (1<<3)static const struct pci_device_id pci_ids[]__devinitdata = { {
@@ -65,6 +66,14 @@ static const struct pci_device_id pci_ids[] __devinitdata = { .driver_data = SDHCI_QUIRK_FORCE_DMA, }, + { + .vendor = PCI_VENDOR_ID_ENE, + .device = PCI_DEVICE_ID_ENE_CB712_SD, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = SDHCI_QUIRK_SINGLE_POWER_WRITE, + }, + { /* Generic SD host controller */ PCI_DEVICE_CLASS((PCI_CLASS_SYSTEM_SDHCI << 8), 0xFFFF00) },
@@ -674,10 +683,17 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned short power)if (host->power == power)return ; -writeb (0 , host->ioaddr +SDHCI_POWER_CONTROL ); - -if (power == (unsigned short )-1 ) +if (power == (unsigned short )-1 ) { +writeb (0 , host->ioaddr +SDHCI_POWER_CONTROL ); goto out; + } + +/* +* Spec says that we should clear the power reg before setting +* a new value. Some controllers don't seem to like this though. +*/ +if (!(host->chip->quirks &SDHCI_QUIRK_SINGLE_POWER_WRITE )) +writeb (0 , host->ioaddr +SDHCI_POWER_CONTROL ); pwr =SDHCI_POWER_ON ;
include/linux/pci_ids.h +1 -0
@@ -1971,6 +1971,7 @@#define PCI_DEVICE_ID_TOPIC_TP560 0x0000#define PCI_VENDOR_ID_ENE 0x1524 +#define PCI_DEVICE_ID_ENE_CB712_SD 0x0550#define PCI_DEVICE_ID_ENE_1211 0x1211#define PCI_DEVICE_ID_ENE_1225 0x1225#define PCI_DEVICE_ID_ENE_1410 0x1410
Signature · 5 lines
| Darren Salt | linux or ds at | nr. Ashington, | Toon | RISC OS, Linux | youmustbejoking,demon,co,uk | Northumberland | Army | + Burn less waste. Use less packaging. Waste less. USE FEWER RESOURCES. Necessity has no law.
Quoted 19 lines · Greg KH
This is the start of the stable review cycle for the 2.6.19.6 release.
This will probably be the last release of the 2.6.19-stable series, so if there are patches that you feel should be applied to that tree, please let me know.
There are 9 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let us know. If anyone is a maintainer of the proper subsystem, and wants to add a Signed-off-by: line to the patch, please respond with it.
These patches are sent out with a number of different people on the Cc:
line. If you wish to be a reviewer, please email [email protected] to add your name to the list. If you want to be off the reviewer list, also email us.Responses should be made by Thursday March 1 00:00 UTC. Anything received after that time might be too late.
Quoted 6 lines
The whole patch set can be downloaded at:
kernel.org/pub/linux/kernel/v2.6/testing/patch-2.6.19.6-rc1.gzthanks,
the -stable release team
Greg,
I still have three DVB patches that need to go to 2.6.19.y, the dvbdev patch being most important. I sent this dvbdev patch to you during the 2.6.19.5 review period and expected it to surface this time around, but maybe our email paths have crossed.
Since I am unable to send patches inline from my current location, I've posted the three pending patches for 2.6.19.y here:
http://linuxtv.org/~mkrufky/stable/2.6.19.y/
Please add these if possible. Again, the "dvbdev-fix-illegal-re-usage-of-fileoperations-struct" patch is the most important one of these.
---
For 2.6.20.y, I have seven patches waiting for the v4l-dvb subsystem trees. I have posted these patches here:
http://linuxtv.org/~mkrufky/stable/2.6.20.y/
If you can queue these up for the next 2.6.20.y release, that would be great. Otherwise, if I don't see them added to the queue, I will send them inline to you the next time I am at my own machine (a few days from now).
Regards,
Michael Krufky
Quoted 34 lines · Michael Krufky
Quoted 19 lines · Greg KH
This is the start of the stable review cycle for the 2.6.19.6 release.
This will probably be the last release of the 2.6.19-stable series, so if there are patches that you feel should be applied to that tree, please let me know.
There are 9 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let us know. If anyone is a maintainer of the proper subsystem, and wants to add a Signed-off-by: line to the patch, please respond with it.
These patches are sent out with a number of different people on the Cc:
line. If you wish to be a reviewer, please email [email protected] to add your name to the list. If you want to be off the reviewer list, also email us.Responses should be made by Thursday March 1 00:00 UTC. Anything received after that time might be too late.
Quoted 6 lines
The whole patch set can be downloaded at:
kernel.org/pub/linux/kernel/v2.6/testing/patch-2.6.19.6-rc1.gzthanks,
the -stable release team
Greg,
I still have three DVB patches that need to go to 2.6.19.y, the dvbdev patch being most important. I sent this dvbdev patch to you during the 2.6.19.5 review period and expected it to surface this time around, but maybe our email paths have crossed.
Quoted 8 lines
Since I am unable to send patches inline from my current location, I've posted the three pending patches for 2.6.19.y here:
http://linuxtv.org/~mkrufky/stable/2.6.19.y/
Please add these if possible. Again, the "dvbdev-fix-illegal-re-usage-of-fileoperations-struct" patch is the most important one of these.
Argh, I forgot these :(
Do you want me to do a new 2.6.19-stable release with these patches in it? It's my fault I didn't get this in, so I don't really mind if you feel it is important enough (it doesn't take that long to spin another kernel release.)
thanks,
greg k-h
Quoted 45 lines · Greg KH
Quoted 33 lines · Michael Krufky
Quoted 19 lines · Greg KH
This is the start of the stable review cycle for the 2.6.19.6 release.
This will probably be the last release of the 2.6.19-stable series, so if there are patches that you feel should be applied to that tree, please let me know.
There are 9 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let us know. If anyone is a maintainer of the proper subsystem, and wants to add a Signed-off-by: line to the patch, please respond with it.
These patches are sent out with a number of different people on the Cc:
line. If you wish to be a reviewer, please email [email protected] to add your name to the list. If you want to be off the reviewer list, also email us.Responses should be made by Thursday March 1 00:00 UTC. Anything received after that time might be too late.
Quoted 6 lines
The whole patch set can be downloaded at:
kernel.org/pub/linux/kernel/v2.6/testing/patch-2.6.19.6-rc1.gzthanks,
the -stable release team
Greg,
I still have three DVB patches that need to go to 2.6.19.y, the dvbdev patch being most important. I sent this dvbdev patch to you during the 2.6.19.5 review period and expected it to surface this time around, but maybe our email paths have crossed.
Quoted 8 lines
Since I am unable to send patches inline from my current location, I've posted the three pending patches for 2.6.19.y here:
http://linuxtv.org/~mkrufky/stable/2.6.19.y/
Please add these if possible. Again, the "dvbdev-fix-illegal-re-usage-of-fileoperations-struct" patch is the most important one of these.
Argh, I forgot these :(
Quoted 8 lines
Do you want me to do a new 2.6.19-stable release with these patches in it? It's my fault I didn't get this in, so I don't really mind if you feel it is important enough (it doesn't take that long to spin another kernel release.)
thanks,
greg k-h
The dvbdev patch is pretty important, fixes a horrible problem, although the case for it to occur is rare. The other two patches are of the "obviously correct - minimal change" type.
If it isnt too much trouble, then yes, it is worth it to push a new release because of the dvbdev patch.
However, please chop the "backported from" and "cherry picked from" lines from those patches. I cherry-picked them from Mauro's tree, but he wiped it out and re-pushed those changes in before Linus merged them.... so, the actual changesets in Linus' tree have different hashes.
(i removed those old hashes from the patches that I posted on linuxtv.org)
As for the 2.6.20.y patches, should I email those to you inline or can you just grab them from the linuxtv.org www server? ( http://linuxtv.org/~mkrufky/stable/2.6.20.y/ )
Thanks,
Mike Krufky
Quoted 5 lines · Michael Krufky
The dvbdev patch is pretty important, fixes a horrible problem, although the case for it to occur is rare. The other two patches are of the "obviously correct - minimal change" type.
Quoted 8 lines
If it isnt too much trouble, then yes, it is worth it to push a new release because of the dvbdev patch.
However, please chop the "backported from" and "cherry picked from" lines from those patches. I cherry-picked them from Mauro's tree, but he wiped it out and re-pushed those changes in before Linus merged them.... so, the actual changesets in Linus' tree have different hashes.
(i removed those old hashes from the patches that I posted on linuxtv.org)
I picked up the new patches and did a new release.
Quoted 2 lines
As for the 2.6.20.y patches, should I email those to you inline or can you just grab them from the linuxtv.org www server? ( http://linuxtv.org/~mkrufky/stable/2.6.20.y/ )
Email is usually better, as that's what my scripts are set up to handle.
thanks,
greg k-h