Skip to contentSkip to conversation

rt2x00: define MAX_RX_NOISE

PATCH In review Ivo van Doorn 1 participant 1 message Feb 28, 2007 Networking drivers (wireless)

lore
Share & tools
lore

Ivo van Doorn

author
#0 lore raw

PATCH 6/28 rt2x00: define MAX_RX_NOISE

Move max_noise value into a MAX_NOISE define.

Signed-off-by Ivo van Doorn <[email protected]>

---

drivers/net/wireless/mac80211/rt2x00/rt2500pci.c +1 -1
index 1db9eb2..038e384 100644
@@ -2703,7 +2703,7 @@ static int rt2500pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
 		rt2x00_get_field16(eeprom, EEPROM_CALIBRATE_OFFSET_RSSI);
 	if (rt2x00dev->hw->max_rssi == 0x00 || rt2x00dev->hw->max_rssi == (s8)0xff)
 		rt2x00dev->hw->max_rssi = MAX_RX_SSI;
-	rt2x00dev->hw->max_noise = -110;
+	rt2x00dev->hw->max_noise = MAX_RX_NOISE;
 
 	return 0;
 }
drivers/net/wireless/mac80211/rt2x00/rt2500pci.h +1 -0
index fc4a865..f4a51b1 100644
@@ -53,6 +53,7 @@
  * Max RSSI value, required for RSSI <-> dBm conversion.
  */
 #define MAX_RX_SSI			120
+#define MAX_RX_NOISE			-110
 
 /*
  * Register layout information.
drivers/net/wireless/mac80211/rt2x00/rt2500usb.c +1 -1
index 1021663..483b1ba 100644
@@ -2547,7 +2547,7 @@ static int rt2500usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
 		rt2x00_get_field16(eeprom, EEPROM_CALIBRATE_OFFSET_RSSI);
 	if (rt2x00dev->hw->max_rssi == 0x00 || rt2x00dev->hw->max_rssi == (s8)0xff)
 		rt2x00dev->hw->max_rssi = MAX_RX_SSI;
-	rt2x00dev->hw->max_noise = -110;
+	rt2x00dev->hw->max_noise = MAX_RX_NOISE;
 
 	return 0;
 }
drivers/net/wireless/mac80211/rt2x00/rt2500usb.h +1 -0
index 7f97799..93e7b0d 100644
@@ -46,6 +46,7 @@
  * Max RSSI value, required for RSSI <-> dBm conversion.
  */
 #define MAX_RX_SSI			120
+#define MAX_RX_NOISE			-110
 
 /*
  * Register layout information.
drivers/net/wireless/mac80211/rt2x00/rt61pci.c +1 -1
index 8a51a7d..3739c2f 100644
@@ -3530,7 +3530,7 @@ static int rt61pci_init_hw(struct rt2x00_dev *rt2x00dev)
 		IEEE80211_HW_MONITOR_DURING_OPER;
 	rt2x00dev->hw->extra_tx_headroom = 0;
 	rt2x00dev->hw->max_rssi = MAX_RX_SSI;
-	rt2x00dev->hw->max_noise = -110;
+	rt2x00dev->hw->max_noise = MAX_RX_NOISE;
 	rt2x00dev->hw->queues = RING_NUM_TX;
 
 	num_modes = rt61pci_init_hw_modes(rt2x00dev);
drivers/net/wireless/mac80211/rt2x00/rt61pci.h +1 -0
index 6db5e9c..12df048 100644
@@ -46,6 +46,7 @@
  * Max RSSI value, required for RSSI <-> dBm conversion.
  */
 #define MAX_RX_SSI			120
+#define MAX_RX_NOISE			-110
 
 /*
  * Register layout information.
drivers/net/wireless/mac80211/rt2x00/rt73usb.c +1 -1
index 10246dd..85ae23e 100644
@@ -3186,7 +3186,7 @@ static int rt73usb_init_hw(struct rt2x00_dev *rt2x00dev)
 		IEEE80211_HW_MONITOR_DURING_OPER;
 	rt2x00dev->hw->extra_tx_headroom = 0;
 	rt2x00dev->hw->max_rssi = MAX_RX_SSI;
-	rt2x00dev->hw->max_noise = -110;
+	rt2x00dev->hw->max_noise = MAX_RX_NOISE;
 	rt2x00dev->hw->queues = RING_NUM_TX;
 
 	num_modes = rt73usb_init_hw_modes(rt2x00dev);
drivers/net/wireless/mac80211/rt2x00/rt73usb.h +1 -0
index 4f7d338..32c04f9 100644
@@ -44,6 +44,7 @@
  * Max RSSI value, required for RSSI <-> dBm conversion.
  */
 #define MAX_RX_SSI			120
+#define MAX_RX_NOISE			-110
 
 /*
  * Register layout information.