Very slow routing table modification if RTA_FLOW is set
Hello all,
I have noticed that using realm patch for quagga
<http://vcalinus.gemenii.ro/quaggarealms.html> causes the kernel to spend a lot more time processing rtnetlink messages.
If routes added to the kernel are not tagged with a realm number, the time from sending a netlink cmd to receiving an ack is mostly stable at several dozen microseconds or less.
However, if I add route tagging with 'neighbor X.X.X.X realm origin-as', the time spent in kernel:
1. seems to increase with the numer of FIB entries
2. is much more jittery
The net result is that after adding about 100k routes, the time between cmd and ack is usually around 4 _milli_seconds, but sometimes the route is added immediately (i.e. after 20 us or so), just like when the table is nearly empty. Overall, the process of receiving a full routing table slows down from a minute to about 11.
The kernel is 2.6.18.6. I have tried using both FIB_HASH and FIB_TRIE. I'll try to collect dome results from oprofile next and if anything pops out at me, I'll let you know.
The core of the quagga patch with regard to the kernel is:
if (rib->realmto)
addattr32 (&req.n, sizeof req, RTA_FLOW, rib->realmto);while constructing the netlink packet.
Is this a known problem? Can anything be done about it?
Please CC as I'm not subscribed to the list.
Best regards,
Grzegorz Nosek
From: NetArt - Grzegorz Nosek <[email protected]>
Date: Thu, 1 Mar 2007 15:29:11 +0100
Quoted 3 lines
I have noticed that using realm patch for quagga
<http://vcalinus.gemenii.ro/quaggarealms.html> causes the kernel to spend a lot more time processing rtnetlink messages.
Please report networking problems to the networking development list which is [email protected], thank you.
Most networking developers do not read linux-kernel.
From: NetArt - Grzegorz Nosek <[email protected]>
Date: Thu, 1 Mar 2007 15:29:11 +0100
Quoted 3 lines
I have noticed that using realm patch for quagga
<http://vcalinus.gemenii.ro/quaggarealms.html> causes the kernel to spend a lot more time processing rtnetlink messages.
For the second time, I am going to ask you very nicely to please post this instead to the Linux networking development mailing list, located at [email protected]
That is where you will reach the most people knowledgable in the area of your problem report, networking developers mostly do not read linux-kernel
Thank you.