IDE updates

index 6b2d152..556455f 100644
@@ -17,8 +17,6 @@
  * device can't do DMA handshaking for some stupid reason. We don't need to do that.
  */
 
-#undef REALLY_SLOW_IO           /* most systems can safely undef this */
-
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/timer.h>

index e2cea18..37aa6dd 100644
@@ -43,8 +43,6 @@
 
 #define IDEDISK_VERSION	"1.18"
 
-#undef REALLY_SLOW_IO		/* most systems can safely undef this */
-
 //#define DEBUG
 
 #include <linux/module.h>

index c67b3b1..bd513f5 100644
@@ -583,6 +583,8 @@ u8 eighty_ninty_three (ide_drive_t *drive)
 	if(!(drive->id->hw_config & 0x4000))
 		return 0;
 #endif /* CONFIG_IDEDMA_IVB */
+	if (!(drive->id->hw_config & 0x2000))
+		return 0;
 	return 1;
 }
 

index 8afce4c..6871931 100644
@@ -345,16 +345,16 @@ static int ide_scan_pio_blacklist (char *model)
 
 /**
  *	ide_get_best_pio_mode	-	get PIO mode from drive
- *	@driver: drive to consider
+ *	@drive: drive to consider
  *	@mode_wanted: preferred mode
- *	@max_mode: highest allowed
- *	@d: pio data
+ *	@max_mode: highest allowed mode
+ *	@d: PIO data
  *
  *	This routine returns the recommended PIO settings for a given drive,
  *	based on the drive->id information and the ide_pio_blacklist[].
- *	This is used by most chipset support modules when "auto-tuning".
  *
- *	Drive PIO mode auto selection
+ *	Drive PIO mode is auto-selected if 255 is passed as mode_wanted.
+ *	This is used by most chipset support modules when "auto-tuning".
  */
 
 u8 ide_get_best_pio_mode (ide_drive_t *drive, u8 mode_wanted, u8 max_mode, ide_pio_data_t *d)

@@ -367,6 +367,7 @@ u8 ide_get_best_pio_mode (ide_drive_t *drive, u8 mode_wanted, u8 max_mode, ide_p
 
 	if (mode_wanted != 255) {
 		pio_mode = mode_wanted;
+		use_iordy = (pio_mode > 2);
 	} else if (!drive->id) {
 		pio_mode = 0;
 	} else if ((pio_mode = ide_scan_pio_blacklist(id->model)) != -1) {

@@ -396,19 +397,12 @@ u8 ide_get_best_pio_mode (ide_drive_t *drive, u8 mode_wanted, u8 max_mode, ide_p
 			}
 		}
 
-#if 0
-		if (drive->id->major_rev_num & 0x0004) printk("ATA-2 ");
-#endif
-
 		/*
 		 * Conservative "downgrade" for all pre-ATA2 drives
 		 */
 		if (pio_mode && pio_mode < 4) {
 			pio_mode--;
 			overridden = 1;
-#if 0
-			use_iordy = (pio_mode > 2);
-#endif
 			if (cycle_time && cycle_time < ide_pio_timings[pio_mode].cycle_time)
 				cycle_time = 0; /* use standard timing */
 		}

index 8afbd6c..8f15c23 100644
@@ -31,8 +31,6 @@
  *			valid after probe time even with noprobe
  */
 
-#undef REALLY_SLOW_IO		/* most systems can safely undef this */
-
 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/string.h>

index b3c0818..dfbd744 100644
@@ -126,8 +126,6 @@
 #define	REVISION	"Revision: 7.00alpha2"
 #define	VERSION		"Id: ide.c 7.00a2 20020906"
 
-#undef REALLY_SLOW_IO		/* most systems can safely undef this */
-
 #define _IDE_C			/* Tell ide.h it's really us */
 
 #include <linux/module.h>

@@ -1486,23 +1484,23 @@ static int __init match_parm (char *s, const char *keywords[], int vals[], int m
 }
 
 #ifdef CONFIG_BLK_DEV_ALI14XX
-static int __initdata probe_ali14xx;
+extern int probe_ali14xx;
 extern int ali14xx_init(void);
 #endif
 #ifdef CONFIG_BLK_DEV_UMC8672
-static int __initdata probe_umc8672;
+extern int probe_umc8672;
 extern int umc8672_init(void);
 #endif
 #ifdef CONFIG_BLK_DEV_DTC2278
-static int __initdata probe_dtc2278;
+extern int probe_dtc2278;
 extern int dtc2278_init(void);
 #endif
 #ifdef CONFIG_BLK_DEV_HT6560B
-static int __initdata probe_ht6560b;
+extern int probe_ht6560b;
 extern int ht6560b_init(void);
 #endif
 #ifdef CONFIG_BLK_DEV_QD65XX
-static int __initdata probe_qd65xx;
+extern int probe_qd65xx;
 extern int qd65xx_init(void);
 #endif
 

@@ -1580,7 +1578,7 @@ static int __init ide_setup(char *s)
 	 */
 	if (s[0] == 'h' && s[1] == 'd' && s[2] >= 'a' && s[2] <= max_drive) {
 		const char *hd_words[] = {
-			"none", "noprobe", "nowerr", "cdrom", "serialize",
+			"none", "noprobe", "nowerr", "cdrom", "minus5",
 			"autotune", "noautotune", "minus8", "swapdata", "bswap",
 			"noflush", "remap", "remap63", "scsi", NULL };
 		unit = s[2] - 'a';

@@ -1608,9 +1606,6 @@ static int __init ide_setup(char *s)
 				drive->ready_stat = 0;
 				hwif->noprobe = 0;
 				goto done;
-			case -5: /* "serialize" */
-				printk(" -- USE \"ide%d=serialize\" INSTEAD", hw);
-				goto do_serialize;
 			case -6: /* "autotune" */
 				drive->autotune = IDE_TUNE_AUTO;
 				goto obsolete_option;

@@ -1671,7 +1666,7 @@ static int __init ide_setup(char *s)
 		 * (-8, -9, -10) are reserved to ease the hardcoding.
 		 */
 		static const char *ide_words[] = {
-			"noprobe", "serialize", "autotune", "noautotune", 
+			"noprobe", "serialize", "minus3", "minus4",
 			"reset", "dma", "ata66", "minus8", "minus9",
 			"minus10", "four", "qd65xx", "ht6560b", "cmd640_vlb",
 			"dtc2278", "umc8672", "ali14xx", NULL };

@@ -1742,12 +1737,17 @@ static int __init ide_setup(char *s)
 				hwif->chipset = mate->chipset = ide_4drives;
 				mate->irq = hwif->irq;
 				memcpy(mate->io_ports, hwif->io_ports, sizeof(hwif->io_ports));
-				goto do_serialize;
+				hwif->mate = mate;
+				mate->mate = hwif;
+				hwif->serialized = mate->serialized = 1;
+				goto obsolete_option;
 			}
 #endif /* CONFIG_BLK_DEV_4DRIVES */
 			case -10: /* minus10 */
 			case -9: /* minus9 */
 			case -8: /* minus8 */
+			case -4:
+			case -3:
 				goto bad_option;
 			case -7: /* ata66 */
 #ifdef CONFIG_BLK_DEV_IDEPCI

@@ -1762,16 +1762,7 @@ static int __init ide_setup(char *s)
 			case -5: /* "reset" */
 				hwif->reset = 1;
 				goto obsolete_option;
-			case -4: /* "noautotune" */
-				hwif->drives[0].autotune = IDE_TUNE_NOAUTO;
-				hwif->drives[1].autotune = IDE_TUNE_NOAUTO;
-				goto obsolete_option;
-			case -3: /* "autotune" */
-				hwif->drives[0].autotune = IDE_TUNE_AUTO;
-				hwif->drives[1].autotune = IDE_TUNE_AUTO;
-				goto obsolete_option;
 			case -2: /* "serialize" */
-			do_serialize:
 				hwif->mate = &ide_hwifs[hw^1];
 				hwif->mate->mate = hwif;
 				hwif->serialized = hwif->mate->serialized = 1;

@@ -1840,8 +1831,8 @@ static void __init probe_for_hwifs (void)
 #endif /* CONFIG_BLK_DEV_CMD640 */
 #ifdef CONFIG_BLK_DEV_IDE_PMAC
 	{
-		extern void pmac_ide_probe(void);
-		pmac_ide_probe();
+		extern int pmac_ide_probe(void);
+		(void)pmac_ide_probe();
 	}
 #endif /* CONFIG_BLK_DEV_IDE_PMAC */
 #ifdef CONFIG_BLK_DEV_GAYLE

index 9c54446..91961aa 100644
@@ -37,8 +37,6 @@
  * mode 4 for a while now with no trouble.)  -Derek
  */
 
-#undef REALLY_SLOW_IO           /* most systems can safely undef this */
-
 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/kernel.h>

@@ -230,9 +228,17 @@ static int __init ali14xx_probe(void)
 	return 0;
 }
 
+int probe_ali14xx = 0;
+
+module_param_named(probe, probe_ali14xx, bool, 0);
+MODULE_PARM_DESC(probe, "probe for ALI M14xx chipsets");
+
 /* Can be called directly from ide.c. */
 int __init ali14xx_init(void)
 {
+	if (probe_ali14xx == 0)
+		goto out;
+
 	/* auto-detect IDE controller port */
 	if (findPort()) {
 		if (ali14xx_probe())

@@ -240,6 +246,7 @@ int __init ali14xx_init(void)
 		return 0;
 	}
 	printk(KERN_ERR "ali14xx: not found.\n");
+out:
 	return -ENODEV;
 }
 

index 3b1d33b..0219ffa 100644
@@ -4,8 +4,6 @@
  *  Copyright (C) 1996  Linus Torvalds & author (see below)
  */
 
-#undef REALLY_SLOW_IO           /* most systems can safely undef this */
-
 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/kernel.h>

@@ -94,7 +92,7 @@ static void tune_dtc2278 (ide_drive_t *drive, u8 pio)
 	HWIF(drive)->drives[!drive->select.b.unit].io_32bit = 1;
 }
 
-static int __init probe_dtc2278(void)
+static int __init dtc2278_probe(void)
 {
 	unsigned long flags;
 	ide_hwif_t *hwif, *mate;

@@ -145,10 +143,18 @@ static int __init probe_dtc2278(void)
 	return 0;
 }
 
+int probe_dtc2278 = 0;
+
+module_param_named(probe, probe_dtc2278, bool, 0);
+MODULE_PARM_DESC(probe, "probe for DTC2278xx chipsets");
+
 /* Can be called directly from ide.c. */
 int __init dtc2278_init(void)
 {
-	if (probe_dtc2278()) {
+	if (probe_dtc2278 == 0)
+		return -ENODEV;
+
+	if (dtc2278_probe()) {
 		printk(KERN_ERR "dtc2278: ide interfaces already in use!\n");
 		return -EBUSY;
 	}

index 19ccd00..a283264 100644
@@ -36,8 +36,6 @@
 
 #define HT6560B_VERSION "v0.07"
 
-#undef REALLY_SLOW_IO		/* most systems can safely undef this */
-
 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/kernel.h>

@@ -303,12 +301,20 @@ static void tune_ht6560b (ide_drive_t *drive, u8 pio)
 #endif
 }
 
+int probe_ht6560b = 0;
+
+module_param_named(probe, probe_ht6560b, bool, 0);
+MODULE_PARM_DESC(probe, "probe for HT6560B chipset");
+
 /* Can be called directly from ide.c. */
 int __init ht6560b_init(void)
 {
 	ide_hwif_t *hwif, *mate;
 	int t;
 
+	if (probe_ht6560b == 0)
+		return -ENODEV;
+
 	hwif = &ide_hwifs[0];
 	mate = &ide_hwifs[1];
 

index a5023cd..b08c37c 100644
@@ -359,14 +359,17 @@ void ide_release(struct pcmcia_device *link)
 static struct pcmcia_device_id ide_ids[] = {
 	PCMCIA_DEVICE_FUNC_ID(4),
 	PCMCIA_DEVICE_MANF_CARD(0x0007, 0x0000),	/* Hitachi */
+	PCMCIA_DEVICE_MANF_CARD(0x000a, 0x0000),	/* I-O Data CFA */
+	PCMCIA_DEVICE_MANF_CARD(0x001c, 0x0001),	/* Mitsubishi CFA */
 	PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704),
-	PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401),
+	PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401),	/* SanDisk CFA */
 	PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000),	/* Toshiba */
 	PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d),
 	PCMCIA_DEVICE_MANF_CARD(0x00ce, 0x0000),	/* Samsung */
  	PCMCIA_DEVICE_MANF_CARD(0x0319, 0x0000),	/* Hitachi */
 	PCMCIA_DEVICE_MANF_CARD(0x2080, 0x0001),
-	PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0200),	/* Lexar */
+	PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0100),	/* Viking CFA */
+	PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0200),	/* Lexar, Viking CFA */
 	PCMCIA_DEVICE_PROD_ID123("Caravelle", "PSC-IDE ", "PSC000", 0x8c36137c, 0xd0693ab8, 0x2768a9f0),
 	PCMCIA_DEVICE_PROD_ID123("CDROM", "IDE", "MCD-601p", 0x1b9179ca, 0xede88951, 0x0d902f74),
 	PCMCIA_DEVICE_PROD_ID123("PCMCIA", "IDE CARD", "F1", 0x281f1c5d, 0x1907960c, 0xf7fde8b9),

index d3c3bc2..2fb8f50 100644
@@ -16,8 +16,8 @@
  * Please set local bus speed using kernel parameter idebus
  * 	for example, "idebus=33" stands for 33Mhz VLbus
  * To activate controller support, use "ide0=qd65xx"
- * To enable tuning, use "ide0=autotune"
- * To enable second channel tuning (qd6580 only), use "ide1=autotune"
+ * To enable tuning, use "hda=autotune hdb=autotune"
+ * To enable 2nd channel tuning (qd6580 only), use "hdc=autotune hdd=autotune"
  */
 
 /*

@@ -25,8 +25,6 @@
  * Samuel Thibault <[email protected]>
  */
 
-#undef REALLY_SLOW_IO		/* most systems can safely undef this */
-
 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/kernel.h>

@@ -490,9 +488,17 @@ static int __init qd_probe(int base)
 	return 1;
 }
 
+int probe_qd65xx = 0;
+
+module_param_named(probe, probe_qd65xx, bool, 0);
+MODULE_PARM_DESC(probe, "probe for QD65xx chipsets");
+
 /* Can be called directly from ide.c. */
 int __init qd65xx_init(void)
 {
+	if (probe_qd65xx == 0)
+		return -ENODEV;
+
 	if (qd_probe(0x30))
 		qd_probe(0xb0);
 	if (ide_hwifs[0].chipset != ide_qd65xx &&

index 6e2c58c..ca79744 100644
@@ -165,12 +165,21 @@ static int __init umc8672_probe(void)
 	return 0;
 }
 
+int probe_umc8672 = 0;
+
+module_param_named(probe, probe_umc8672, bool, 0);
+MODULE_PARM_DESC(probe, "probe for UMC8672 chipset");
+
 /* Can be called directly from ide.c. */
 int __init umc8672_init(void)
 {
-	if (umc8672_probe())
-		return -ENODEV;
-	return 0;
+	if (probe_umc8672 == 0)
+		goto out;
+
+	if (umc8672_probe() == 0)
+		return 0;;
+out:
+	return -ENODEV;;
 }
 
 #ifdef MODULE

index 0a59d5e..b2dc028 100644
@@ -29,8 +29,6 @@
  * Note: for more information, please refer "AMD Alchemy Au1200/Au1550 IDE
  *       Interface and Linux Device Driver" Application Note.
  */
-#undef REALLY_SLOW_IO           /* most systems can safely undef this */
-
 #include <linux/types.h>
 #include <linux/module.h>
 #include <linux/kernel.h>

index 4debd18..83e0aa6 100644
@@ -1,5 +1,5 @@
 /*
- * linux/drivers/ide/pci/alim15x3.c		Version 0.17	2003/01/02
+ * linux/drivers/ide/pci/alim15x3.c		Version 0.21	2007/02/03
  *
  *  Copyright (C) 1998-2000 Michel Aubry, Maintainer
  *  Copyright (C) 1998-2000 Andrzej Krzysztofowicz, Maintainer

@@ -9,6 +9,7 @@
  *  May be copied or modified under the terms of the GNU General Public License
  *  Copyright (C) 2002 Alan Cox <[email protected]>
  *  ALi (now ULi M5228) support by Clear Zhang <[email protected]>
+ *  Copyright (C) 2007 MontaVista Software, Inc. <[email protected]>
  *
  *  (U)DMA capable version of ali 1533/1543(C), 1535(D)
  *

@@ -280,15 +281,17 @@ static int ali_get_info (char *buffer, char **addr, off_t offset, int count)
 #endif  /* defined(DISPLAY_ALI_TIMINGS) && defined(CONFIG_PROC_FS) */
 
 /**
- *	ali15x3_tune_drive	-	set up a drive
+ *	ali15x3_tune_pio	-	set up chipset for PIO mode
  *	@drive: drive to tune
- *	@pio: unused
+ *	@pio: desired mode
  *
- *	Select the best PIO timing for the drive in question. Then
- *	program the controller for this drive set up
+ *	Select the best PIO mode for the drive in question.
+ *	Then program the controller for this mode.
+ *
+ *	Returns the PIO mode programmed.
  */
  
-static void ali15x3_tune_drive (ide_drive_t *drive, u8 pio)
+static u8 ali15x3_tune_pio (ide_drive_t *drive, u8 pio)
 {
 	ide_pio_data_t d;
 	ide_hwif_t *hwif = HWIF(drive);

@@ -356,6 +359,22 @@ static void ali15x3_tune_drive (ide_drive_t *drive, u8 pio)
 	 * { 20,   50,     30  }    PIO Mode 5 with IORDY (nonstandard)
 	 */
 
+	return pio;
+}
+
+/**
+ *	ali15x3_tune_drive	-	set up drive for PIO mode
+ *	@drive: drive to tune
+ *	@pio: desired mode
+ *
+ *	Program the controller with the best PIO timing for the given drive.
+ *	Then set up the drive itself.
+ */
+
+static void ali15x3_tune_drive (ide_drive_t *drive, u8 pio)
+{
+	pio = ali15x3_tune_pio(drive, pio);
+	(void) ide_config_drive_speed(drive, XFER_PIO_0 + pio);
 }
 
 /**

@@ -430,7 +449,7 @@ static u8 ali15x3_ratemask (ide_drive_t *drive)
 }
 
 /**
- *	ali15x3_tune_chipset	-	set up chiset for new speed
+ *	ali15x3_tune_chipset	-	set up chipset/drive for new speed
  *	@drive: drive to configure for
  *	@xferspeed: desired speed
  *

@@ -461,7 +480,7 @@ static int ali15x3_tune_chipset (ide_drive_t *drive, u8 xferspeed)
 		pci_write_config_byte(dev, m5229_udma, tmpbyte);
 
 		if (speed < XFER_SW_DMA_0)
-			ali15x3_tune_drive(drive, speed);
+			(void) ali15x3_tune_pio(drive, speed - XFER_PIO_0);
 	} else {
 		pci_read_config_byte(dev, m5229_udma, &tmpbyte);
 		tmpbyte &= (0x0f << ((1-unit) << 2));

index 61b5f9c..dc43f00 100644
@@ -98,7 +98,6 @@
  *			 (patch courtesy of Zoltan Hidvegi)
  */
 
-#undef REALLY_SLOW_IO		/* most systems can safely undef this */
 #define CMD640_PREFETCH_MASKS 1
 
 //#define CMD640_DUMP_REGS

195 lines not on this page · raw message

index e2672fc..d4b753e 100644
@@ -122,7 +122,7 @@ static struct pci_driver driver = {
 static int
 delkin_cb_init (void)
 {
-	return pci_module_init(&driver);
+	return pci_register_driver(&driver);
 }
 
 static void

index b408c6c..f2c5a14 100644
@@ -21,8 +21,6 @@
  * are deemed to be part of the source code.
  */
 
-#undef REALLY_SLOW_IO		/* most systems can safely undef this */
-
 #include <linux/types.h>
 #include <linux/module.h>
 #include <linux/kernel.h>

index 9ca60dd..aede7ee 100644
@@ -57,7 +57,7 @@
  * There is a 25/33MHz switch in configuration
  * register, but driver is written for use at any frequency which get
  * (use idebus=xx to select PCI bus speed).
- * Use ide0=autotune for automatical tune of the PIO modes.
+ * Use hda=autotune and hdb=autotune for automatical tune of the PIO modes.
  * If you get strange results, do not use this and set PIO manually
  * by hdparm.
  *

@@ -87,7 +87,6 @@
  * 0.5 doesn't work.
  */
 
-#undef REALLY_SLOW_IO	/* most systems can safely undef this */
 #define OPTI621_DEBUG		/* define for debug messages */
 
 #include <linux/types.h>

104 lines not on this page · raw message

index c185531..f8c9546 100644
@@ -15,8 +15,6 @@
  *  Dunno if this fixes both ports, or only the primary port (?).
  */
 
-#undef REALLY_SLOW_IO		/* most systems can safely undef this */
-
 #include <linux/types.h>
 #include <linux/module.h>
 #include <linux/kernel.h>

index 7b4c189..71eccdf 100644
@@ -26,6 +26,11 @@
  *	If you have strange problems with nVidia chipset systems please
  *	see the SI support documentation and update your system BIOS
  *	if neccessary
+ *
+ *  The Dell DRAC4 has some interesting features including effectively hot
+ *  unplugging/replugging the virtual CD interface when the DRAC is reset.
+ *  This often causes drivers/ide/siimage to panic but is ok with the rather
+ *  smarter code in libata.
  */
 
 #include <linux/types.h>

index ae7eb58..852ccb3 100644
@@ -1,8 +1,8 @@
 /*
- *  linux/drivers/ide/pci/slc90e66.c	Version 0.13	December 30, 2006
+ *  linux/drivers/ide/pci/slc90e66.c	Version 0.14	February 8, 2007
  *
  *  Copyright (C) 2000-2002 Andre Hedrick <[email protected]>
- *  Copyright (C) 2006 MontaVista Software, Inc. <[email protected]>
+ *  Copyright (C) 2006-2007 MontaVista Software, Inc. <[email protected]>
  *
  * This is a look-alike variation of the ICH0 PIIX4 Ultra-66,
  * but this keeps the ISA-Bridge and slots alive.

@@ -57,11 +57,7 @@ static u8 slc90e66_dma_2_pio (u8 xfer_rate) {
 	}
 }
 
-/*
- *  Based on settings done by AMI BIOS
- *  (might be useful if drive is not registered in CMOS for any reason).
- */
-static void slc90e66_tune_drive (ide_drive_t *drive, u8 pio)
+static void slc90e66_tune_pio (ide_drive_t *drive, u8 pio)
 {
 	ide_hwif_t *hwif	= HWIF(drive);
 	struct pci_dev *dev	= hwif->pci_dev;

@@ -80,7 +76,6 @@ static void slc90e66_tune_drive (ide_drive_t *drive, u8 pio)
 					{ 2, 1 },
 					{ 2, 3 }, };
 
-	pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
 	spin_lock_irqsave(&ide_lock, flags);
 	pci_read_config_word(dev, master_port, &master_data);
 

@@ -94,19 +89,20 @@ static void slc90e66_tune_drive (ide_drive_t *drive, u8 pio)
 		master_data |=  0x4000;
 		master_data &= ~0x0070;
 		if (pio > 1) {
-			/* enable PPE, IE and TIME */
-			master_data = master_data | (control << 4);
+			/* Set PPE, IE and TIME */
+			master_data |= control << 4;
 		}
 		pci_read_config_byte(dev, slave_port, &slave_data);
-		slave_data = slave_data & (hwif->channel ? 0x0f : 0xf0);
-		slave_data = slave_data | (((timings[pio][0] << 2) | timings[pio][1]) << (hwif->channel ? 4 : 0));
+		slave_data &= hwif->channel ? 0x0f : 0xf0;
+		slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) <<
+			       (hwif->channel ? 4 : 0);
 	} else {
 		master_data &= ~0x3307;
 		if (pio > 1) {
 			/* enable PPE, IE and TIME */
-			master_data = master_data | control;
+			master_data |= control;
 		}
-		master_data = master_data | (timings[pio][0] << 12) | (timings[pio][1] << 8);
+		master_data |= (timings[pio][0] << 12) | (timings[pio][1] << 8);
 	}
 	pci_write_config_word(dev, master_port, master_data);
 	if (is_slave)

@@ -114,6 +110,13 @@ static void slc90e66_tune_drive (ide_drive_t *drive, u8 pio)
 	spin_unlock_irqrestore(&ide_lock, flags);
 }
 
+static void slc90e66_tune_drive (ide_drive_t *drive, u8 pio)
+{
+	pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+	slc90e66_tune_pio(drive, pio);
+	(void) ide_config_drive_speed(drive, XFER_PIO_0 + pio);
+}
+
 static int slc90e66_tune_chipset (ide_drive_t *drive, u8 xferspeed)
 {
 	ide_hwif_t *hwif	= HWIF(drive);

@@ -162,8 +165,8 @@ static int slc90e66_tune_chipset (ide_drive_t *drive, u8 xferspeed)
 			pci_write_config_word(dev, 0x4a, reg4a & ~a_speed);
 	}
 
-	slc90e66_tune_drive(drive, slc90e66_dma_2_pio(speed));
-	return (ide_config_drive_speed(drive, speed));
+	slc90e66_tune_pio(drive, slc90e66_dma_2_pio(speed));
+	return ide_config_drive_speed(drive, speed);
 }
 
 static int slc90e66_config_drive_for_dma (ide_drive_t *drive)

@@ -185,8 +188,7 @@ static int slc90e66_config_drive_xfer_rate (ide_drive_t *drive)
 		return 0;
 
 	if (ide_use_fast_pio(drive))
-		(void)slc90e66_tune_chipset(drive, XFER_PIO_0 +
-				ide_get_best_pio_mode(drive, 255, 4, NULL));
+		slc90e66_tune_drive(drive, 255);
 
 	return -1;
 }

index 395d352..071a030 100644
@@ -48,7 +48,7 @@
 #include <asm/mediabay.h>
 #endif
 
-#include "ide-timing.h"
+#include "../ide-timing.h"
 
 #undef IDE_PMAC_DEBUG
 

@@ -1551,19 +1551,34 @@ static struct pci_driver pmac_ide_pci_driver = {
 };
 MODULE_DEVICE_TABLE(pci, pmac_ide_pci_match);
 
-void __init
-pmac_ide_probe(void)
+int __init pmac_ide_probe(void)
 {
+	int error;
+
 	if (!machine_is(powermac))
-		return;
+		return -ENODEV;
 
 #ifdef CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST
-	pci_register_driver(&pmac_ide_pci_driver);
-	macio_register_driver(&pmac_ide_macio_driver);
+	error = pci_register_driver(&pmac_ide_pci_driver);
+	if (error)
+		goto out;
+	error = macio_register_driver(&pmac_ide_macio_driver);
+	if (error) {
+		pci_unregister_driver(&pmac_ide_pci_driver);
+		goto out;
+	}
 #else
-	macio_register_driver(&pmac_ide_macio_driver);
-	pci_register_driver(&pmac_ide_pci_driver);
+	error = macio_register_driver(&pmac_ide_macio_driver);
+	if (error)
+		goto out;
+	error = pci_register_driver(&pmac_ide_pci_driver);
+	if (error) {
+		macio_unregister_driver(&pmac_ide_macio_driver);
+		goto out;
+	}
 #endif
+out:
+	return error;
 }
 
 #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC

@@ -1983,7 +1998,7 @@ static void pmac_ide_dma_host_off(ide_drive_t *drive)
 {
 }
 
-static int pmac_ide_dma_host_on(ide_drive_t *drive)
+static void pmac_ide_dma_host_on(ide_drive_t *drive)
 {
 }
 

index de64b02..f84bf79 100644
@@ -509,6 +509,32 @@ static int scc_ide_dma_end(ide_drive_t * drive)
 	return __ide_dma_end(drive);
 }
 
+/* returns 1 if dma irq issued, 0 otherwise */
+static int scc_dma_test_irq(ide_drive_t *drive)
+{
+	ide_hwif_t *hwif	= HWIF(drive);
+	u8 dma_stat		= hwif->INB(hwif->dma_status);
+
+	/* return 1 if INTR asserted */
+	if ((dma_stat & 4) == 4)
+		return 1;
+
+	/* Workaround for PTERADD: emulate DMA_INTR when
+	 * - IDE_STATUS[ERR] = 1
+	 * - INT_STATUS[INTRQ] = 1
+	 * - DMA_STATUS[IORACTA] = 1
+	 */
+	if (in_be32((void __iomem *)IDE_ALTSTATUS_REG) & ERR_STAT &&
+	    in_be32((void __iomem *)(hwif->dma_base + 0x014)) & INTSTS_INTRQ &&
+		dma_stat & 1)
+		return 1;
+
+	if (!drive->waiting_for_dma)
+		printk(KERN_WARNING "%s: (%s) called while not waiting\n",
+			drive->name, __FUNCTION__);
+	return 0;
+}
+
 /**
  *	setup_mmio_scc	-	map CTRL/BMID region
  *	@dev: PCI device we are configuring

@@ -712,6 +738,7 @@ static void __devinit init_hwif_scc(ide_hwif_t *hwif)
 	hwif->speedproc = scc_tune_chipset;
 	hwif->tuneproc = scc_tuneproc;
 	hwif->ide_dma_check = scc_config_drive_for_dma;
+	hwif->ide_dma_test_irq = scc_dma_test_irq;
 
 	hwif->drives[0].autotune = IDE_TUNE_AUTO;
 	hwif->drives[1].autotune = IDE_TUNE_AUTO;

59 lines not on this page · raw message

index 79c0282..34f2676 100644
@@ -1359,7 +1359,8 @@ u8 ide_dump_status(ide_drive_t *, const char *, u8);
 typedef struct ide_pio_timings_s {
 	int	setup_time;	/* Address setup (ns) minimum */
 	int	active_time;	/* Active pulse (ns) minimum */
-	int	cycle_time;	/* Cycle time (ns) minimum = (setup + active + recovery) */
+	int	cycle_time;	/* Cycle time (ns) minimum = */
+				/* active + recovery (+ setup for some chips) */
 } ide_pio_timings_t;
 
 typedef struct ide_pio_data_s {