Please pull git://www.denx.de/git/u-boot-ppc4xx.git
The following changes since commit fdd1d6dcc97c595bd9d598ed3b22a7038781272c:
Stefan Roese (1):
Merge with
git+ssh://sr at pollux.denx.org/home/sr/git/u-boot/denx-merge-sr
are found in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.git
Stefan Roese (2):
Fix AMCC 44x SPD SDRAM init code to support 2 DIMM's Use dynamic SDRAM TLB setup on AMCC Ocotea eval board
board/amcc/ocotea/init.S | 82 +++++++++++----------------------------------- cpu/ppc4xx/44x_spd_ddr.c | 31 +++++++++++++++-- include/configs/ocotea.h | 3 +- 3 files changed, 48 insertions(+), 68 deletions(-)
Quoted 6 lines · In message <[email protected]> you wrote:
git://www.denx.de/git/u-boot-ppc4xx.gitStefan Roese (2):
Fix AMCC 44x SPD SDRAM init code to support 2 DIMM's Use dynamic SDRAM TLB setup on AMCC Ocotea eval board
ACK by wd at denx.de
Tested on Ocotea with all combinations of 1 x 256 MB and 2 x 512 MB memory modules, all working fine.
Merged. Thanks.
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, HRB 165235 Munich, CEO: Wolfgang Denk
Office: Kirchenstr. 5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"You know, after a woman's raised a family and so on, she wants to
start living her own life." "Whose life she's _been_ living, then?"
- Terry Pratchett, _Witches Abroad_The following changes since commit e50b791b3f8b696e32000bbaa6e2d1f098c4bc04:
Stefan Roese (1):
Merge with /home/stefan/git/u-boot/acadia
are found in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.git
Stefan Roese (7):
i2c: Enable "old" i2c commands even when CONFIG_I2C_CMD_TREE is defined Merge some AMCC make targets to keep the top-level Makefile smaller
ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
ppc4xx: Fix "bootstrap" command for Katmai board
ppc4xx: Change Yucca config file to support ECC
ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
ppc4xx: Update Katmai bootstrap command
Makefile | 50 ++++------- board/amcc/katmai/cmd_katmai.c | 105 ++++++---------------- common/cmd_i2c.c | 3 +- cpu/ppc4xx/44x_spd_ddr2.c | 191 ++++++++++++++++++++++++++------------- include/configs/sequoia.h | 1 - include/configs/yosemite.h | 1 - include/configs/yucca.h | 2 +- 7 files changed, 176 insertions(+), 177 deletions(-)
Quoted 1 line · In message <[email protected]> you wrote:
The following changes since commit
e50b791b3f8b696e32000bbaa6e2d1f098c4bc04:
...
Quoted 3 lines
are found in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.git
Got 'em.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, HRB 165235 Munich, CEO: Wolfgang Denk Office: Kirchenstr. 5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de If today is the first day of the rest of your life, what the hell was yesterday?
The following changes since commit 25b0806fff1f1fd24f69f6d9ef04d8345667e60b:
Wolfgang Denk (1):
Merge with /home/wd/git/u-boot/custodian/u-boot-ppc4xx
are found in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.git
Denis Peter (1):
Fix bugs in cmd_ide.c and cmd_scsi.c
Domen Puncer (2):
icecube/lite5200b: wakeup from low-power support icecube/lite5200b: document wakeup from low-power support
Greg Lopp (1):
Fix use of "void *" for block dev read/write buffer pointers
Heiko Schocher (1):
[Fix] Set the LED status register on the UC101 for the LXT971 PHY.
Jeffrey Mann (1):
ppc4xx: Fix i2c divisor calcularion for PPC4xx
Stefan Roese (5):
ppc4xx: Change SysACE address on Katmai
Merge with git://www.denx.de/git/u-boot.git
ppc4xx: Add output for bootrom location to 405EZ ports
ppc4xx: Update Acadia to not setup PLL when booting via bootstrap EEPROM Merge with git://www.denx.de/git/u-boot.git
Wolfgang Denk (3):
Update for SC3 board
Update CHANGELOG
Update CHANGELOG
CHANGELOG | 140 ++++++++++++++++++++++++++++++++++++++++ Makefile | 5 ++ board/amcc/acadia/acadia.c | 10 ++- board/amcc/katmai/init.S | 2 +- board/icecube/icecube.c | 49 ++++++++++++++ board/uc101/uc101.c | 2 + common/cmd_ide.c | 21 +++--- common/cmd_scsi.c | 2 +- cpu/mpc5xxx/fec.c | 4 + cpu/ppc4xx/cpu.c | 30 ++++++++- cpu/ppc4xx/i2c.c | 4 +- doc/README.Lite5200B_low_power | 22 ++++++ include/configs/katmai.h | 2 +- include/configs/sc3.h | 10 ++-- include/ppc405.h | 2 + include/ppc440.h | 2 +- 16 files changed, 278 insertions(+), 29 deletions(-) create mode 100644 doc/README.Lite5200B_low_power
Viele Gr??e,
Stefan
=====================================================================
DENX Software Engineering GmbH, HRB 165235 Munich, CEO: Wolfgang Denk
Office: Kirchenstr. 5, D-82194 Groebenzell, Germany
=====================================================================
Quoted 7 lines · In message <[email protected]> you wrote:
The following changes since commit
25b0806fff1f1fd24f69f6d9ef04d8345667e60b:
Wolfgang Denk (1):
Merge with/home/wd/git/u-boot/custodian/u-boot-ppc4xxare found in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.git
Merged. Thanks.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, HRB 165235 Munich, CEO: Wolfgang Denk Office: Kirchenstr. 5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Give a man a fish, and you feed him for a day. Teach a man to fish, and he'll invite himself over for dinner. - Calvin Keegan