Oscar awards
The golden award for the most warnings in the code goes to atlas_defconfig which build with 73 warnings. Actually not so terrible but the the SAA9730 ethernet driver is a horrible piece of code which in turn largely due to the SAA9730 being one of most broken pieces of silicon ever marketed.
The silver medal goes to db1200_defconfig with 64 warnings and bronce goes to sb1250-swarm_defconfig with just 48 points ;-)
So with the Viper 2 (non-)support gone all but one of the 46 MIPS defconfig files actually build with the one exception being excite_defconfig:
CC arch/mips/basler/excite/excite_prom.o
CC arch/mips/basler/excite/excite_setup.oarch/mips/basler/excite/excite_setup.c: In function 'excite_init_console':arch/mips/basler/excite/excite_setup.c:115: error: 'UPIO_RM9000' undeclared (first use in this function) arch/mips/basler/excite/excite_setup.c:115: error: (Each undeclared identifier is reported only once arch/mips/basler/excite/excite_setup.c:115: error: for each function it appears in.) arch/mips/basler/excite/excite_setup.c:116: error: 'PORT_RM9000' undeclared (first use in this function) make[1]: *** [arch/mips/basler/excite/excite_setup.o] Error 1
make: *** [arch/mips/basler/excite] Error 2
make: Leaving directory `/var/tmp/kernel-orig'
Ralf
Quoted 13 lines · Ralf Baechle
So with the Viper 2 (non-)support gone all but one of the 46 MIPS defconfig files actually build with the one exception being
excite_defconfig:CC
arch/mips/basler/excite/excite_prom.o
CCarch/mips/basler/excite/excite_setup.oarch/mips/basler/excite/excite_setup.c: In function 'excite_init_console':arch/mips/basler/excite/excite_setup.c:115: error: 'UPIO_RM9000' undeclared (first use in this function)arch/mips/basler/excite/excite_setup.c:115: error: (Each undeclared identifier is reported only oncearch/mips/basler/excite/excite_setup.c:115: error: for each function it appears in.)arch/mips/basler/excite/excite_setup.c:116: error: 'PORT_RM9000' undeclared (first use in this function) make[1]: *** [arch/mips/basler/excite/excite_setup.o] Error 1
make: *** [arch/mips/basler/excite] Error 2
make: Leaving directory `/var/tmp/kernel-orig'
This will change as soon as the rm9k_serial-patches currently in the -mm tree are merged upstream. Btw., any comments about http://www.linux-mips.org/archives/linux-mips/2007-03/msg00012.html?
regards,
tk
Signature · 19 lines
_______________________________ Thomas Köller, Software Developer Basler Vision Technologies An der Strusbek 60-62 22926 Ahrensburg Germany Tel. +49 (0) 4102 - 463 390 Fax +49 (0) 4102 - 463 390 mailto:[email protected] http://www.baslerweb.com Vorstand: Dr.-Ing. Dietmar Ley (Vorsitzender) · John P. Jennings · Peter Krumhoff · Aufsichtsratsvorsitzender: Norbert Basler Basler AG · Amtsgericht Ahrensburg HRB 4090 · Ust-IdNr.: DE 135 098 121 · Steuer-Nr.: 30 292 04497 _______________________________
Quoted 1 line · Thomas Koeller
This will change as soon as the rm9k_serial-patches currently in the -mm tree are merged upstream.
I guess akpm won't push this patch to Linus until after 2.6.21.
Quoted 1 line
Btw., any comments about http://www.linux-mips.org/archives/linux-mips/2007-03/msg00012.html?
I'll try to review it later today ...
Ralf