Skip to contentSkip to conversation

smsc47m1: Use DRVNAME consistently

PATCH New Jean Delvare 1 participant 1 message Mar 15, 2007 Hardware monitoring

lore
Share & tools
lore

Jean Delvare

author
#0 lore raw

PATCH 1/1 smsc47m1: Use DRVNAME consistently

Also use pr_info where possible.

Signed-off-by Jean Delvare <khali at linux-fr.org>
---
 drivers/hwmon/smsc47m1.c |   14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)
drivers/hwmon/smsc47m1.c +6 -8
@@ -437,25 +437,23 @@ static int __init smsc47m1_find(unsigned
 	 */
 	switch (val) {
 	case 0x51:
-		printk(KERN_INFO "smsc47m1: Found SMSC LPC47B27x\n");
+		pr_info(DRVNAME ": Found SMSC LPC47B27x\n");
 		sio_data->type = smsc47m1;
 		break;
 	case 0x59:
-		printk(KERN_INFO "smsc47m1: Found SMSC "
-		       "LPC47M10x/LPC47M112/LPC47M13x\n");
+		pr_info(DRVNAME ": Found SMSC LPC47M10x/LPC47M112/LPC47M13x\n");
 		sio_data->type = smsc47m1;
 		break;
 	case 0x5F:
-		printk(KERN_INFO "smsc47m1: Found SMSC LPC47M14x\n");
+		pr_info(DRVNAME ": Found SMSC LPC47M14x\n");
 		sio_data->type = smsc47m1;
 		break;
 	case 0x60:
-		printk(KERN_INFO "smsc47m1: Found SMSC "
-		       "LPC47M15x/LPC47M192/LPC47M997\n");
+		pr_info(DRVNAME ": Found SMSC LPC47M15x/LPC47M192/LPC47M997\n");
 		sio_data->type = smsc47m1;
 		break;
 	case 0x6B:
-		printk(KERN_INFO "smsc47m1: Found SMSC LPC47M292\n");
+		pr_info(DRVNAME ": Found SMSC LPC47M292\n");
 		sio_data->type = smsc47m2;
 		break;
 	default:

@@ -468,7 +466,7 @@ static int __init smsc47m1_find(unsigned
 	      |  superio_inb(SUPERIO_REG_BASE + 1);
 	val = superio_inb(SUPERIO_REG_ACT);
 	if (*addr = 0 || (val & 0x01) = 0) {
-		printk(KERN_INFO "smsc47m1: Device is disabled, will not use\n");
+		pr_info(DRVNAME ": Device is disabled, will not use\n");
 		superio_exit();
 		return -ENODEV;
 	}
Signature · 1 line
Jean Delvare