i386: Why putting __USER_DS in kernel threads stack initialization?
Hi list,
Reading the kernel threads initialization code I see:
int kernel_thread(...) {
struct pt_regs regs; memset(®s, 0, sizeof(regs)); [...] ** regs.xds = __USER_DS; ** regs.xes = __USER_DS; [...] /* Ok, create the new process.. */ return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, ®s, \ 0, NULL, NULL);
Continuing with the code, the threads stack (beginning from %esp) is initialized with the passed *regs from do_fork:
int copy_thread(..., struct task_struct *p, struct pt_regs *regs) {
struct pt_regs * childregs; struct task_struct *tsk; childregs = task_pt_regs(p); ** *childregs = *regs; [...]
** p->thread.esp = (unsigned long) childregs;
So the question is what will a _kernel_ thread do with the Usermode Segment address ?
Thanks,
P.S. I've tried commenting out both lines which led to a non functional init, Also setting them to __USER_DS made init start but stopped issuing the error:
`Panic: Segment violation at 0x8049798 - Sleeping for 30 seconds'
Signature · 2 lines
Ahmed S. Darwish http://darwish.07.googlepages.com
Quoted 5 lines · ahmed
P.S. I've tried commenting out both lines which led to a non functional init, Also setting them to__USER_DSmade init start but stopped issuing the error:
`Panic: Segment violation at0x8049798- Sleeping for 30 seconds'
Sorry, I meant setting them to __KERNEL_DS.
Thanks,
Signature · 2 lines
Ahmed S. Darwish http://darwish.07.googlepages.com
Quoted 29 lines · Ahmed S. Darwish
Hi list,
Reading the kernel threads initialization code I see:
int
kernel_thread(...){struct pt_regs regs; memset(®s, 0, sizeof(regs)); [...] ** regs.xds = __USER_DS; ** regs.xes = __USER_DS; [...] /* Ok, create the new process.. */ return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, ®s, \ 0, NULL, NULL);Continuing with the code, the threads stack (beginning from %esp) is initialized with the passed *regs from
do_fork:int
copy_thread(..., struct task_struct *p, struct pt_regs *regs){struct pt_regs * childregs; struct task_struct *tsk; childregs = task_pt_regs(p); ** *childregs = *regs; [...]**
p->thread.esp= (unsigned long) childregs;
Quoted 12 lines
So the question is what will a _kernel_ thread do with the Usermode Segment address ?
Thanks,
P.S. I've tried commenting out both lines which led to a non functional init, Also setting them to__USER_DSmade init start but stopped issuing the error:
`Panic: Segment violation at0x8049798- Sleeping for 30 seconds'Signature · 2 lines
Ahmed S. Darwish http://darwish.07.googlepages.com
You might be confusing two routines. The kernel thread routine sets DS and ES to the kernel data segment, __KERNEL_DS, not the user data segment. This is so the kernel thread can access the kernel data. Note that this is done by putting the values in the pt_regs structure so it doesn't happen 'now', but after the fork.
Cheers,
Dick Johnson
Penguin : Linux version 2.6.16.24 on an i686 machine (5592.68 BogoMips). New book: http://www.AbominableFirebug.com/
_
****************************************************************
The information transmitted in this message is confidential and may be privileged. Any review, retransmission, dissemination, or other use of this information by persons or entities other than the intended recipient is prohibited. If you are not the intended recipient, please notify Analogic Corporation immediately - by replying to this message or by sending an email to [email protected] - and destroy all copies of this information, including any attachments, without reading or disclosing them.
Thank you.
Quoted 35 lines · linux-os (Dick Johnson)
Quoted 32 lines · Ahmed S. Darwish
Hi list,
Reading the kernel threads initialization code I see:
int
kernel_thread(...){struct pt_regs regs; memset(®s, 0, sizeof(regs)); [...] ** regs.xds = __USER_DS; ** regs.xes = __USER_DS; [...] /* Ok, create the new process.. */ return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, ®s, \ 0, NULL, NULL);Continuing with the code, the threads stack (beginning from %esp) is initialized with the passed *regs from
do_fork:int
copy_thread(..., struct task_struct *p, struct pt_regs *regs){struct pt_regs * childregs; struct task_struct *tsk; childregs = task_pt_regs(p); ** *childregs = *regs; [...]**
p->thread.esp= (unsigned long) childregs;So the question is what will a _kernel_ thread do with the Usermode Segment address ?
Quoted 6 lines
Quoted 6 lines
Thanks,
P.S. I've tried commenting out both lines which led to a non functional init, Also setting them to__USER_DSmade init start but stopped issuing the error:
`Panic: Segment violation at0x8049798- Sleeping for 30 seconds'
Sorry, I meant "setting them to __KERNEL_DS" here.
Quoted 4 lines
You might be confusing two routines. The kernel thread routine sets DS and ES to the kernel data segment,
__KERNEL_DS, not the user data segment.
And that's what's _not_ happening in the code as I mentioned in original post.
Quoted 3 lines
This is so the kernel thread can access the kernel data. Note that this is done by putting the values in the
pt_regsstructure so it doesn't happen 'now', but after the fork.
I've searched the code for such case (setting xds to __KERNEL_DS _After_ copy_thread()) with no success. As I understand, the kernel thread executes the passed function immediately (when given control by scheduler):
i386/kernel/process::kernel_thread():
** regs.ebx = (unsigned long) fn; regs.edx = (unsigned long) arg; regs.xds = __USER_DS; regs.xes = __USER_DS; regs.xfs = __KERNEL_PDA; regs.orig_eax = -1; ** regs.eip = (unsigned long) kernel_thread_helper; do_fork(...)
entry.S::kernel_thread_helper (removing CFI_* pseudo ops):
ENTRY(kernel_thread_helper)
pushl $0
movl %edx,%eax
push %edx
** call *%ebx
push %eax
call do_exit
Am I interpreting the forking process completely wrong?. I'm just curious why the __USER_DS is playing a vital rule in kernel threads regs/stack ?
Thanks alot,
Signature · 2 lines
Ahmed S. Darwish http://darwish.07.googlepages.com