New kernel mouse recognition problem
A message that is not in the archive (sent off-list or not yet received): 63140.87.244.133.121.1174080814.squirrel@postino
Dmitry,
Thanks for you feedback, sorry for the delay on my reply but because I'm not subscribe to the list, only now I saw your message. I hope you will be able to see that this message is a follow up on the previous ones. If you do not mind can you please Cc directly to me.
Now to answer your questions.
The mouse do not works properly, I mean with this that I have the mouse pointer on the screen, with gpm and X, but it jumps randomly when used.
I include below the output from the cat /proc/bus/input/devices, on my actual kernel, 2.6.17-5, I can not include the one from the previous kernel because I've reinstalled the system and I don't have at the moment the possibility to run that previous kernel on the system. If necessary I can try to install it again.
If you prefer that I subscribe to the list to make you followup's easyer just let me know.
Thanks
Victor Fernandes
Output from cat /proc/bus/input/devices:
I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/class/input/input0
H: Handlers=kbd event0
B: EV=120013
B: KEY=4 2000000 2b803878 f840d001 f2ffffdf ffefffff ffffffff fffffffe
B: MSC=10
B: LED=7
I: Bus=0011 Vendor=0002 Product=0001 Version=0000
N: Name="PS/2 Logitech Mouse"
P: Phys=isa0060/serio2/input0
S: Sysfs=/class/input/input1
H: Handlers=mouse0 ts0 event1
B: EV=7
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=3
to reply
From Dmitry Torokhov <>
Subject Re: New kernel mouse recognition problem
Date Fri, 16 Mar 2007 21:24:49 -0400
Digg This
Hi Victor,
Quoted 6 lines · Victor Fernandes
Dear kernel gurus,
I have a long experience with linux but not at the kernel level, so my apologies if this post is not appropriate for the list, but it seemed to me to be the only possible one to post my question.
Quoted 9 lines
Obviously I've also tried to find the solution on the archives (and more) but found nothing appropriate.
Problem: It appears that the new kernels, I've actually kernel 2.6.17-5 (Mandriva 2007) installed, and tested others on the 2.6.x range, do not recognition my "Track Point" mouse anymore. I have on the boot logs (syslog) the following message: "logips2pp: Detected unknown logitech mouse model 0".
Does the mouse still work despite this message?
Quoted 2 lines
The same system with a kernel 2.6.12-12 (Mandriva 10.1) worked properly.
How was it identified by 2.6.12? Could you please send me output of cat /proc/bus/input/devices on 2.6.12 and 2.6.17?
Signature · 6 lines
Dmitry - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Quoted 29 lines · Victor Fernandes
Dear kernel gurus,
I have a long experience with linux but not at the kernel level, so my apologies if this post is not appropriate for the list, but it seemed to me to be the only possible one to post my question.
Obviously I've also tried to find the solution on the archives (and more) but found nothing appropriate.
Problem: It appears that the new kernels, I've actually kernel 2.6.17-5 (Mandriva 2007) installed, and tested others on the 2.6.x range, do not recognition my "Track Point" mouse anymore. I have on the boot logs (syslog) the following message: "logips2pp: Detected unknown logitech mouse model 0".
The same system with a kernel 2.6.12-12 (Mandriva 10.1) worked properly.
Is my mouse too old? Is this a bug? Are there any possibilities to solve the problem?
Please Cc me directly on your replies because I'm not subscribe to the list, I hope this is OK. Obviously I'm more then happy to provide any required information.
Thank you,
Victor Fernandes
Hi Victor,
Quoted 7 lines · Victor Fernandes
Dmitry,
Thanks for you feedback, sorry for the delay on my reply but because I'm not subscribe to the list, only now I saw your message. I hope you will be able to see that this message is a follow up on the previous ones. If you do not mind can you please Cc directly to me.
I did CC you on my reply but unfortunaltely your mail server did not like me. Let's see if this one goes through.
Quoted 4 lines
Now to answer your questions.
The mouse do not works properly, I mean with this that I have the mouse pointer on the screen, with gpm and X, but it jumps randomly when used.
Does it help if you boot with "psmouse.proto=exps"? (Is psmouse a built-in or a module)?
Signature · 1 line
Dmitry
A message that is not in the archive (sent off-list or not yet received): [email protected]
Oh yes it helps, it works nicely, on X and on the console with gpm.
Most probably psmouse is built-in on the kernel because I have no module with that name and if I check on the, what I suppose was the build .config kernel file, I can see the following:
CONFIG_INPUT_MOUSE=yCONFIG_MOUSE_PS2=y
Do you want me to check something else?
Don't bother to Cc me directly anymore, I have subscribe to the mailing list with another e-mail address to avoid problems. Some domain migration issues, sorry for the inconveniency. Regards,
Victor Fernandes
Quoted 30 lines · Dmitry Torokhov
Hi Victor,
Quoted 7 lines · Victor Fernandes
Dmitry,
Thanks for you feedback, sorry for the delay on my reply but because I'm not subscribe to the list, only now I saw your message. I hope you will be able to see that this message is a follow up on the previous ones. If you do not mind can you please Cc directly to me.
I did CC you on my reply but unfortunaltely your mail server did not like me. Let's see if this one goes through.
Quoted 4 lines
Now to answer your questions.
The mouse do not works properly, I mean with this that I have the mouse pointer on the screen, with gpm and X, but it jumps randomly when used.Does it help if you boot with "psmouse.proto=exps"? (Is psmouse a built-in or a module)?
--
Dmitry
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/