Skip to contentSkip to conversation

Update sibyte header files

PATCH New Mark Mason 1 participant 1 message Mar 23, 2007 MIPS

lore
Share & tools
lore

Mark Mason

author
#0 lore raw

PATCH 1/1 Update sibyte header files

Patch to update sibyte header files to match master versions maintained at Broadcom. This patch also corrects some whitespace problems, and (hopefully) shouldn't introduce any new ones.

Signed-off-by Mark Mason <[email protected]>
include/asm-mips/sibyte/bcm1480_int.h +2 -0
index 42d4cf0..c0d5206 100644
@@ -157,6 +157,7 @@ #define K_BCM1480_INT_GPIO_15           
  * Mask values for each interrupt
  */
 
+#define _BCM1480_INT_MASK(w,n)              _SB_MAKEMASK(w,((n) & 0x3F))
 #define _BCM1480_INT_MASK1(n)               _SB_MAKEMASK1(((n) & 0x3F))
 #define _BCM1480_INT_OFFSET(n)              (((n) & 0x40) << 6)
 

@@ -195,6 +196,7 @@ #define M_BCM1480_INT_PMI_LOW           
 #define M_BCM1480_INT_PMI_HIGH              _BCM1480_INT_MASK1(K_BCM1480_INT_PMI_HIGH)
 #define M_BCM1480_INT_PMO_LOW               _BCM1480_INT_MASK1(K_BCM1480_INT_PMO_LOW)
 #define M_BCM1480_INT_PMO_HIGH              _BCM1480_INT_MASK1(K_BCM1480_INT_PMO_HIGH)
+#define M_BCM1480_INT_MBOX_ALL              _BCM1480_INT_MASK(8,K_BCM1480_INT_MBOX_0_0)
 #define M_BCM1480_INT_MBOX_0_0              _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_0)
 #define M_BCM1480_INT_MBOX_0_1              _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_1)
 #define M_BCM1480_INT_MBOX_0_2              _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_2)
include/asm-mips/sibyte/bcm1480_mc.h +27 -5
index 6bdc941..a6a4374 100644
@@ -382,6 +382,10 @@ #define M_BCM1480_MC_CS5                
 #define M_BCM1480_MC_CS6                    _SB_MAKEMASK1(10)
 #define M_BCM1480_MC_CS7                    _SB_MAKEMASK1(11)
 
+#define M_BCM1480_MC_CS                  _SB_MAKEMASK(8,S_BCM1480_MC_CS0)
+#define V_BCM1480_MC_CS(x)               _SB_MAKEVALUE(x,S_BCM1480_MC_CS0)
+#define G_BCM1480_MC_CS(x)               _SB_GETVALUE(x,S_BCM1480_MC_CS0,M_BCM1480_MC_CS0)
+
 #define M_BCM1480_MC_CMD_ACTIVE             _SB_MAKEMASK1(16)
 
 /*

@@ -412,6 +416,8 @@ #if SIBYTE_HDR_FEATURE(1480, PASS2)
 #define K_BCM1480_MC_DRAM_TYPE_DDR2	    2
 #endif
 
+#define K_BCM1480_MC_DRAM_TYPE_DDR2_PASS1   0
+
 #define V_BCM1480_MC_DRAM_TYPE_JEDEC        V_BCM1480_MC_DRAM_TYPE(K_BCM1480_MC_DRAM_TYPE_JEDEC)
 #define V_BCM1480_MC_DRAM_TYPE_FCRAM        V_BCM1480_MC_DRAM_TYPE(K_BCM1480_MC_DRAM_TYPE_FCRAM)
 

@@ -511,6 +517,22 @@ #define M_BCM1480_MC_WR_ODT6_CS4	    _SB
 #define M_BCM1480_MC_WR_ODT6_CS6	    _SB_MAKEMASK1(31)
 
 #define M_BCM1480_MC_CS_ODD_ODT_EN	    _SB_MAKEMASK1(32)
+
+#define S_BCM1480_MC_ODT0	            0
+#define M_BCM1480_MC_ODT0		    _SB_MAKEMASK(8,S_BCM1480_MC_ODT0)
+#define V_BCM1480_MC_ODT0(x)		    _SB_MAKEVALUE(x,S_BCM1480_MC_ODT0)
+
+#define S_BCM1480_MC_ODT2	            8
+#define M_BCM1480_MC_ODT2		    _SB_MAKEMASK(8,S_BCM1480_MC_ODT2)
+#define V_BCM1480_MC_ODT2(x)		    _SB_MAKEVALUE(x,S_BCM1480_MC_ODT2)
+
+#define S_BCM1480_MC_ODT4	            16
+#define M_BCM1480_MC_ODT4		    _SB_MAKEMASK(8,S_BCM1480_MC_ODT4)
+#define V_BCM1480_MC_ODT4(x)		    _SB_MAKEVALUE(x,S_BCM1480_MC_ODT4)
+
+#define S_BCM1480_MC_ODT6	            24
+#define M_BCM1480_MC_ODT6		    _SB_MAKEMASK(8,S_BCM1480_MC_ODT6)
+#define V_BCM1480_MC_ODT6(x)		    _SB_MAKEVALUE(x,S_BCM1480_MC_ODT6)
 #endif
 
 /*

@@ -588,11 +610,11 @@ #define	M_BCM1480_MC_DLL_REGBYPASS      
 #define	M_BCM1480_MC_DQO_SHIFT            _SB_MAKEMASK1(47)
 #endif
 
-#define S_BCM1480_MC_DLL_DEFAULT            48
-#define M_BCM1480_MC_DLL_DEFAULT            _SB_MAKEMASK(6,S_BCM1480_MC_DLL_DEFAULT)
-#define V_BCM1480_MC_DLL_DEFAULT(x)         _SB_MAKEVALUE(x,S_BCM1480_MC_DLL_DEFAULT)
-#define G_BCM1480_MC_DLL_DEFAULT(x)         _SB_GETVALUE(x,S_BCM1480_MC_DLL_DEFAULT,M_BCM1480_MC_DLL_DEFAULT)
-#define V_BCM1480_MC_DLL_DEFAULT_DEFAULT    V_BCM1480_MC_DLL_DEFAULT(0x10)
+#define S_BCM1480_MC_DLL_DEFAULT           48
+#define M_BCM1480_MC_DLL_DEFAULT           _SB_MAKEMASK(6,S_BCM1480_MC_DLL_DEFAULT)
+#define V_BCM1480_MC_DLL_DEFAULT(x)        _SB_MAKEVALUE(x,S_BCM1480_MC_DLL_DEFAULT)
+#define G_BCM1480_MC_DLL_DEFAULT(x)        _SB_GETVALUE(x,S_BCM1480_MC_DLL_DEFAULT,M_BCM1480_MC_DLL_DEFAULT)
+#define V_BCM1480_MC_DLL_DEFAULT_DEFAULT   V_BCM1480_MC_DLL_DEFAULT(0x10)
 
 #if SIBYTE_HDR_FEATURE(1480, PASS2)
 #define S_BCM1480_MC_DLL_REGCTRL	  54
include/asm-mips/sibyte/bcm1480_regs.h +20 -0
index c2dd2fe..bda391d 100644
@@ -230,6 +230,7 @@ #define R_BCM1480_DUART_ISRREG(chan)	   
 
 #define A_BCM1480_DUART_IMRREG(chan)	    (A_BCM1480_DUART(chan) + R_BCM1480_DUART_IMRREG(chan))
 #define A_BCM1480_DUART_ISRREG(chan)	    (A_BCM1480_DUART(chan) + R_BCM1480_DUART_ISRREG(chan))
+#define A_BCM1480_DUART_IN_PORT(chan)       (A_BCM1480_DUART(chan) + R_DUART_INP_ORT)
 
 /*
  * These constants are the absolute addresses.

@@ -404,6 +405,21 @@ #define A_BCM1480_IMR_ALIAS_MAILBOX_REGI
 #define R_BCM1480_IMR_ALIAS_MAILBOX_0           0x0000		/* 0x0x0 */
 #define R_BCM1480_IMR_ALIAS_MAILBOX_0_SET       0x0008		/* 0x0x8 */
 
+/*
+ * these macros work together to build the address of a mailbox
+ * register, e.g., A_BCM1480_MAILBOX_REGISTER(0,R_BCM1480_IMR_MAILBOX_SET,2)
+ * for mbox_0_set_cpu2 returns 0x00100240C8
+ */
+#define R_BCM1480_IMR_MAILBOX_CPU         0x00
+#define R_BCM1480_IMR_MAILBOX_SET         0x08
+#define R_BCM1480_IMR_MAILBOX_CLR         0x10
+#define R_BCM1480_IMR_MAILBOX_NUM_SPACING 0x20
+#define A_BCM1480_MAILBOX_REGISTER(num,reg,cpu) \
+    (A_BCM1480_IMR_CPU0_BASE + \
+     (num * R_BCM1480_IMR_MAILBOX_NUM_SPACING) + \
+     (cpu * BCM1480_IMR_REGISTER_SPACING) + \
+     (R_BCM1480_IMR_MAILBOX_0_CPU + reg))
+
 /*  *********************************************************************
     * System Performance Counter Registers (Section 4.7)
     ********************************************************************* */

@@ -428,6 +444,10 @@ #define A_BCM1480_SCD_PERF_CNT_5        
 #define A_BCM1480_SCD_PERF_CNT_6            0x0010020500
 #define A_BCM1480_SCD_PERF_CNT_7            0x0010020508
 
+#define BCM1480_SCD_NUM_PERF_CNT 8
+#define BCM1480_SCD_PERF_CNT_SPACING 8
+#define A_BCM1480_SCD_PERF_CNT(n) (A_SCD_PERF_CNT_0+(n*BCM1480_SCD_PERF_CNT_SPACING))
+
 /*  *********************************************************************
     * System Bus Watcher Registers (Section 4.8)
     ********************************************************************* */
include/asm-mips/sibyte/bcm1480_scd.h +27 -61

120 lines not on this page · raw message

include/asm-mips/sibyte/board.h +12 -2
index 3dfe29e..73bce90 100644
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation
+ * Copyright (C) 2000,2001,2002,2003,2004 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License

@@ -19,8 +19,8 @@
 #ifndef _SIBYTE_BOARD_H
 #define _SIBYTE_BOARD_H
 
-
 #if defined(CONFIG_SIBYTE_SWARM) || defined(CONFIG_SIBYTE_PTSWARM) || \
+    defined(CONFIG_SIBYTE_PT1120) || defined(CONFIG_SIBYTE_PT1125) || \
     defined(CONFIG_SIBYTE_CRHONE) || defined(CONFIG_SIBYTE_CRHINE) || \
     defined(CONFIG_SIBYTE_LITTLESUR)
 #include <asm/sibyte/swarm.h>

@@ -55,6 +55,16 @@ #else
 #define setleds(t0,t1,c0,c1,c2,c3)
 #endif /* LEDS_PHYS */
 
+#else
+
+void swarm_setup(void);
+
+#ifdef LEDS_PHYS
+extern void setleds(char *str);
+#else
+#define setleds(s) do { } while (0)
+#endif /* LEDS_PHYS */
+
 #endif /* __ASSEMBLY__ */
 
 #endif /* _SIBYTE_BOARD_H */
include/asm-mips/sibyte/carmel.h +6 -7
index 57c53e6..e691b6d 100644
@@ -18,18 +18,17 @@
 #ifndef __ASM_SIBYTE_CARMEL_H
 #define __ASM_SIBYTE_CARMEL_H
 
-
 #include <asm/sibyte/sb1250.h>
 #include <asm/sibyte/sb1250_int.h>
 
 #define SIBYTE_BOARD_NAME "Carmel"
 
-#define GPIO_PHY_INTERRUPT      2
-#define GPIO_NONMASKABLE_INT    3
-#define GPIO_CF_INSERTED        6
-#define GPIO_MONTEREY_RESET     7
-#define GPIO_QUADUART_INT       8
-#define GPIO_CF_INT             9
+#define GPIO_PHY_INTERRUPT      2 
+#define GPIO_NONMASKABLE_INT    3 
+#define GPIO_CF_INSERTED        6 
+#define GPIO_MONTEREY_RESET     7 
+#define GPIO_QUADUART_INT       8 
+#define GPIO_CF_INT             9 
 #define GPIO_FPGA_CCLK          10
 #define GPIO_FPGA_DOUT          11
 #define GPIO_FPGA_DIN           12
include/asm-mips/sibyte/sb1250_int.h +1 -4
index 05c7b39..94e8299 100644
@@ -45,8 +45,6 @@ #include "sb1250_defs.h"
  * First, the interrupt numbers.
  */
 
-#if SIBYTE_HDR_FEATURE_1250_112x
-
 #define K_INT_SOURCES               64
 
 #define K_INT_WATCHDOG_TIMER_0      0

@@ -152,6 +150,7 @@ #define M_INT_MBOX_0                _SB_
 #define M_INT_MBOX_1                _SB_MAKEMASK1(K_INT_MBOX_1)
 #define M_INT_MBOX_2                _SB_MAKEMASK1(K_INT_MBOX_2)
 #define M_INT_MBOX_3                _SB_MAKEMASK1(K_INT_MBOX_3)
+#define M_INT_MBOX_ALL              _SB_MAKEMASK(4,K_INT_MBOX_0)
 #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
 #define M_INT_CYCLE_CP0_INT	    _SB_MAKEMASK1(K_INT_CYCLE_CP0_INT)
 #define M_INT_CYCLE_CP1_INT	    _SB_MAKEMASK1(K_INT_CYCLE_CP1_INT)

@@ -247,5 +246,3 @@ #define M_LDTVECT_RAISEMBOX             
 
 
 #endif	/* 1250/112x */
-
-#endif
include/asm-mips/sibyte/sb1250_mac.h +12 -12
index adfc688..833c8b5 100644
@@ -129,9 +129,9 @@ #define K_MAC_BYPASS_EOP            3
 #define M_MAC_BYPASS_16             _SB_MAKEMASK1(42)
 #define M_MAC_BYPASS_FCS_CHK	    _SB_MAKEMASK1(43)
 
-#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
 #define M_MAC_RX_CH_SEL_MSB	    _SB_MAKEMASK1(44)
-#endif /* 1250 PASS2 || 112x PASS1 */
+#endif /* 1250 PASS2 || 112x PASS1 || 1480*/
 
 #if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
 #define M_MAC_SPLIT_CH_SEL	    _SB_MAKEMASK1(45)

@@ -223,9 +223,9 @@ #if SIBYTE_HDR_FEATURE_UP_TO(1250, PASS1
 /* XXX: Can't enable, as it has the same name as a pass2+ define below.  */
 /* #define M_MAC_TX_WR_THRSH           _SB_MAKEMASK(6,S_MAC_TX_WR_THRSH) */
 #endif /* up to 1250 PASS1 */
-#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
 #define M_MAC_TX_WR_THRSH           _SB_MAKEMASK(7,S_MAC_TX_WR_THRSH)
-#endif /* 1250 PASS2 || 112x PASS1 */
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
 #define V_MAC_TX_WR_THRSH(x)        _SB_MAKEVALUE(x,S_MAC_TX_WR_THRSH)
 #define G_MAC_TX_WR_THRSH(x)        _SB_GETVALUE(x,S_MAC_TX_WR_THRSH,M_MAC_TX_WR_THRSH)
 

@@ -234,9 +234,9 @@ #if SIBYTE_HDR_FEATURE_UP_TO(1250, PASS1
 /* XXX: Can't enable, as it has the same name as a pass2+ define below.  */
 /* #define M_MAC_TX_RD_THRSH           _SB_MAKEMASK(6,S_MAC_TX_RD_THRSH) */
 #endif /* up to 1250 PASS1 */
-#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
 #define M_MAC_TX_RD_THRSH           _SB_MAKEMASK(7,S_MAC_TX_RD_THRSH)
-#endif /* 1250 PASS2 || 112x PASS1 */
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
 #define V_MAC_TX_RD_THRSH(x)        _SB_MAKEVALUE(x,S_MAC_TX_RD_THRSH)
 #define G_MAC_TX_RD_THRSH(x)        _SB_GETVALUE(x,S_MAC_TX_RD_THRSH,M_MAC_TX_RD_THRSH)
 

@@ -260,12 +260,12 @@ #define M_MAC_RX_RL_THRSH           _SB_
 #define V_MAC_RX_RL_THRSH(x)        _SB_MAKEVALUE(x,S_MAC_RX_RL_THRSH)
 #define G_MAC_RX_RL_THRSH(x)        _SB_GETVALUE(x,S_MAC_RX_RL_THRSH,M_MAC_RX_RL_THRSH)
 
-#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
 #define S_MAC_ENC_FC_THRSH           _SB_MAKE64(56)
 #define M_MAC_ENC_FC_THRSH           _SB_MAKEMASK(6,S_MAC_ENC_FC_THRSH)
 #define V_MAC_ENC_FC_THRSH(x)        _SB_MAKEVALUE(x,S_MAC_ENC_FC_THRSH)
 #define G_MAC_ENC_FC_THRSH(x)        _SB_GETVALUE(x,S_MAC_ENC_FC_THRSH,M_MAC_ENC_FC_THRSH)
-#endif /* 1250 PASS2 || 112x PASS1 */
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
 
 /*
  * MAC Frame Configuration Registers (Table 9-15)

@@ -462,9 +462,9 @@ #define M_MAC_TX_OVRFL              _SB_
 #define M_MAC_LTCOL_ERR             _SB_MAKEMASK1(44)
 #define M_MAC_EXCOL_ERR             _SB_MAKEMASK1(45)
 #define M_MAC_CNTR_OVRFL_ERR        _SB_MAKEMASK1(46)
-#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
 #define M_MAC_SPLIT_EN		    _SB_MAKEMASK1(47) 	/* interrupt mask only */
-#endif /* 1250 PASS2 || 112x PASS1 */
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
 
 #define S_MAC_COUNTER_ADDR          _SB_MAKE64(47)
 #define M_MAC_COUNTER_ADDR          _SB_MAKEMASK(5,S_MAC_COUNTER_ADDR)

@@ -598,9 +598,9 @@ #define M_MAC_MCAST_EN          _SB_MAKE
 #define M_MAC_MCAST_INV         _SB_MAKEMASK1(4)
 #define M_MAC_BCAST_EN          _SB_MAKEMASK1(5)
 #define M_MAC_DIRECT_INV        _SB_MAKEMASK1(6)
-#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
 #define M_MAC_ALLMCAST_EN	_SB_MAKEMASK1(7)
-#endif /* 1250 PASS2 || 112x PASS1 */
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
 
 #define S_MAC_IPHDR_OFFSET      _SB_MAKE64(8)
 #define M_MAC_IPHDR_OFFSET      _SB_MAKEMASK(8,S_MAC_IPHDR_OFFSET)
include/asm-mips/sibyte/sb1250_mc.h +1 -1
index 26e4214..4fe848f 100644
@@ -295,7 +295,7 @@ #define M_MC_EXTERNALDECODE	    _SB_MAKE
 
 #if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
 #define M_MC_PRE_ON_A8              _SB_MAKEMASK1(36)
-#define M_MC_RAM_WITH_A13           _SB_MAKEMASK1(38)
+#define M_MC_RAM_WITH_A13           _SB_MAKEMASK1(37)
 #endif /* 1250 PASS3 || 112x PASS1 */
include/asm-mips/sibyte/sb1250_regs.h +37 -9

120 lines not on this page · raw message

include/asm-mips/sibyte/sb1250_scd.h +19 -12
index 7ed0bb6..ba765a7 100644
@@ -84,12 +84,13 @@ #define K_SYS_REVISION_BCM112x_A1	0x20
 #define K_SYS_REVISION_BCM112x_A2	0x21
 #define K_SYS_REVISION_BCM112x_A3	0x22
 #define K_SYS_REVISION_BCM112x_A4	0x23
+#define K_SYS_REVISION_BCM112x_B0	0x30
 
 #define K_SYS_REVISION_BCM1480_S0	0x01
 #define K_SYS_REVISION_BCM1480_A1	0x02
 #define K_SYS_REVISION_BCM1480_A2	0x03
 #define K_SYS_REVISION_BCM1480_A3	0x04
-#define K_SYS_REVISION_BCM1480_B0	0x11
+#define K_SYS_REVISION_BCM1480_B0       0x11
 
 /*Cache size - 23:20  of revision register*/
 #define S_SYS_L2C_SIZE            _SB_MAKE64(20)

@@ -149,7 +150,7 @@ #define K_SYS_SOC_TYPE_BCM1x55      0x7
  * (For the assembler version, sysrev and dest may be the same register.
  * Also, it clobbers AT.)
  */
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 #define SYS_SOC_TYPE(dest, sysrev)					\
 	.set push ;							\
 	.set reorder ;							\

@@ -213,6 +214,7 @@ #define V_SYS_YPOS(x)             _SB_MA
 #define G_SYS_YPOS(x)             _SB_GETVALUE(x,S_SYS_YPOS,M_SYS_YPOS)
 #endif
 
+
 /*
  * System Config Register (Table 4-2)
  * Register: SCD_SYSTEM_CFG

@@ -359,13 +361,13 @@ #endif
  */
 
 #define V_SCD_TIMER_FREQ            1000000
-#define V_SCD_TIMER_WIDTH           23
 
 #define S_SCD_TIMER_INIT            0
-#define M_SCD_TIMER_INIT            _SB_MAKEMASK(V_SCD_TIMER_WIDTH,S_SCD_TIMER_INIT)
+#define M_SCD_TIMER_INIT            _SB_MAKEMASK(23,S_SCD_TIMER_INIT)
 #define V_SCD_TIMER_INIT(x)         _SB_MAKEVALUE(x,S_SCD_TIMER_INIT)
 #define G_SCD_TIMER_INIT(x)         _SB_GETVALUE(x,S_SCD_TIMER_INIT,M_SCD_TIMER_INIT)
 
+#define V_SCD_TIMER_WIDTH	    23
 #define S_SCD_TIMER_CNT             0
 #define M_SCD_TIMER_CNT             _SB_MAKEMASK(V_SCD_TIMER_WIDTH,S_SCD_TIMER_CNT)
 #define V_SCD_TIMER_CNT(x)         _SB_MAKEVALUE(x,S_SCD_TIMER_CNT)

@@ -379,7 +381,6 @@ #define M_SCD_TIMER_MODE_CONTINUOUS M_SC
  * System Performance Counters
  */
 
-#if SIBYTE_HDR_FEATURE_1250_112x
 #define S_SPC_CFG_SRC0            0
 #define M_SPC_CFG_SRC0            _SB_MAKEMASK(8,S_SPC_CFG_SRC0)
 #define V_SPC_CFG_SRC0(x)         _SB_MAKEVALUE(x,S_SPC_CFG_SRC0)

@@ -402,7 +403,6 @@ #define G_SPC_CFG_SRC3(x)         _SB_GE
 
 #define M_SPC_CFG_CLEAR		_SB_MAKEMASK1(32)
 #define M_SPC_CFG_ENABLE	_SB_MAKEMASK1(33)
-#endif
 
 
 /*

@@ -515,8 +515,6 @@ #endif	/* 1250/112x */
  * Trace Buffer Config register
  */
 
-#if SIBYTE_HDR_FEATURE_1250_112x
-
 #define M_SCD_TRACE_CFG_RESET           _SB_MAKEMASK1(0)
 #define M_SCD_TRACE_CFG_START_READ      _SB_MAKEMASK1(1)
 #define M_SCD_TRACE_CFG_START           _SB_MAKEMASK1(2)

@@ -525,17 +523,26 @@ #define M_SCD_TRACE_CFG_FREEZE          
 #define M_SCD_TRACE_CFG_FREEZE_FULL     _SB_MAKEMASK1(5)
 #define M_SCD_TRACE_CFG_DEBUG_FULL      _SB_MAKEMASK1(6)
 #define M_SCD_TRACE_CFG_FULL            _SB_MAKEMASK1(7)
-#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
 #define M_SCD_TRACE_CFG_FORCECNT        _SB_MAKEMASK1(8)
-#endif /* 1250 PASS2 || 112x PASS1 */
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
 
+/*
+ * This field is the same on the 1250/112x and 1480, just located in
+ * a slightly different place in the register.
+ */
+#if SIBYTE_HDR_FEATURE_1250_112x
 #define S_SCD_TRACE_CFG_CUR_ADDR        10
+#else
+#if SIBYTE_HDR_FEATURE_CHIP(1480)
+#define S_SCD_TRACE_CFG_CUR_ADDR        24
+#endif	/* 1480 */
+#endif  /* 1250/112x */
+
 #define M_SCD_TRACE_CFG_CUR_ADDR        _SB_MAKEMASK(8,S_SCD_TRACE_CFG_CUR_ADDR)
 #define V_SCD_TRACE_CFG_CUR_ADDR(x)     _SB_MAKEVALUE(x,S_SCD_TRACE_CFG_CUR_ADDR)
 #define G_SCD_TRACE_CFG_CUR_ADDR(x)     _SB_GETVALUE(x,S_SCD_TRACE_CFG_CUR_ADDR,M_SCD_TRACE_CFG_CUR_ADDR)
 
-#endif	/* 1250/112x */
-
 /*
  * Trace Event registers
  */
include/asm-mips/sibyte/swarm.h +12 -0
index 86db37e..540865f 100644
@@ -32,6 +32,18 @@ #define SIBYTE_HAVE_PCMCIA 1
 #define SIBYTE_HAVE_IDE    1
 #define SIBYTE_DEFAULT_CONSOLE "ttyS0,115200"
 #endif
+#ifdef CONFIG_SIBYTE_PT1120
+#define SIBYTE_BOARD_NAME "PT1120"
+#define SIBYTE_HAVE_PCMCIA 1
+#define SIBYTE_HAVE_IDE    1
+#define SIBYTE_DEFAULT_CONSOLE "ttyS0,115200"
+#endif
+#ifdef CONFIG_SIBYTE_PT1125
+#define SIBYTE_BOARD_NAME "PT1125"
+#define SIBYTE_HAVE_PCMCIA 1
+#define SIBYTE_HAVE_IDE    1
+#define SIBYTE_DEFAULT_CONSOLE "ttyS0,115200"
+#endif
 #ifdef CONFIG_SIBYTE_LITTLESUR
 #define SIBYTE_BOARD_NAME "BCM91250C2 (LittleSur)"
 #define SIBYTE_HAVE_PCMCIA 0