Skip to contentSkip to conversation

RFC: Future plans for bcm43xx-softmac

DISCUSSION Larry Finger 3 participants 4 messages Mar 23, 2007 – Mar 24, 2007

lore
Share & tools
lore
#0 lore raw

I think we have a plan for the future of bcm43xx-softmac once the bcm43xx-mac80211 version goes into mainline. Unfortunately it cannot just be abandoned as there will be no support for 802.11b-only devices in bcm43xx-mac80211.

The steps to be done are as follows:

1. Change the namespace from bcm43xx to bcm4301. This will both reflect the purpose of the changed driver as well as prevent namespace collisions with the bcm43xx-mac80211 version in case both are built into the kernel.

2. Modify bcm4301 to use mac80211 rather than softmac. Although this process has the potential for introducing bugs into what is currently the stable version, it does allow the abandonment of softmac with its deficiencies, many of which are essentially uncorrectable.

3. The PCI-ids recognized by bcm4301-mac80211 will be restricted to the 802.11b-only devices and the configuration information will be modified.

Step 1 will be completed very soon and the appropriate patches will be submitted to Linville's wireless-dev tree.

I will be working on step 2 in the coming months and will submit those patches to the list for comments and testing. When ready, they too will be submitted to Linville. Once bcm43xx-mac80211 goes into mainline, the step 3 patches will be submitted.

Please comment on this plan.

Thanks,

Larry

#1 lore raw
Quoted 17 lines · Larry Finger

I think we have a plan for the future of bcm43xx-softmac once the bcm43xx-mac80211 version goes into mainline. Unfortunately it cannot just be abandoned as there will be no support for 802.11b-only devices in bcm43xx-mac80211.

The steps to be done are as follows:

1. Change the namespace from bcm43xx to bcm4301. This will both reflect the purpose of the changed driver as well as prevent namespace collisions with the bcm43xx-mac80211 version in case both are built into the kernel.

2. Modify bcm4301 to use mac80211 rather than softmac. Although this process has the potential for introducing bugs into what is currently the stable version, it does allow the abandonment of softmac with its deficiencies, many of which are essentially uncorrectable.

3. The PCI-ids recognized by bcm4301-mac80211 will be restricted to the 802.11b-only devices and the configuration information will be modified.

Quoted 8 lines

Step 1 will be completed very soon and the appropriate patches will be submitted to Linville's wireless-dev tree.

I will be working on step 2 in the coming months and will submit those patches to the list for comments and testing. When ready, they too will be submitted to Linville. Once bcm43xx-mac80211 goes into mainline, the step 3 patches will be submitted.

Please comment on this plan.

I ACK this as-is.

Signature · 1 line
Greetings Michael.
#2 lore raw
In reply to Larry Finger
Quoted 10 lines · On Fri, 23 Mar 2007 12:37:51 -0500 Larry Finger <[email protected]>…

I think we have a plan for the future of bcm43xx-softmac once the bcm43xx-mac80211 version goes into mainline. Unfortunately it cannot just be abandoned as there will be no support for 802.11b-only devices in bcm43xx-mac80211.

The steps to be done are as follows:

1. Change the namespace from bcm43xx to bcm4301. This will both reflect the purpose of the changed driver as well as prevent namespace collisions with the bcm43xx-mac80211 version in case both are built into the kernel.

I'm quite sure you know, bcm4301 isn't the only 802.11b-only device. There's bcm4303 too. Anyway, naming the driver bcm4301 sounds reasonable to me.

Quoted 1 line

Please comment on this plan.

ACK.

--
Ciao
Stefano

#3 lore raw
Quoted 10 lines · Stefano Brivio
Quoted 7 lines · On Fri, 23 Mar 2007 12:37:51 -0500 Larry Finger <[email protected]>…

I think we have a plan for the future of bcm43xx-softmac once the bcm43xx-mac80211 version goes into mainline. Unfortunately it cannot just be abandoned as there will be no support for 802.11b-only devices in bcm43xx-mac80211.

The steps to be done are as follows:

Quoted 7 lines
Quoted 3 lines

1. Change the namespace from bcm43xx to bcm4301. This will both reflect the purpose of the changed driver as well as prevent namespace collisions with the bcm43xx-mac80211 version in case both are built into the kernel.

I'm quite sure you know, bcm4301 isn't the only 802.11b-only device. There's bcm4303 too. Anyway, naming the driver bcm4301 sounds reasonable to me.

Yes, but bcm430x would have been more confusing as the 4306 and 4309 are covered by V4 firmware. Other choices such as bcm43xx-old, etc. seemed a little clumsy.

Larry