Skip to contentSkip to conversation

pciehp: Cannot get control of hotplug hardware

DISCUSSION Ryan Hope 2 participants 2 messages Mar 10, 2007 – Mar 25, 2007

lore
Share & tools
lore

Ryan Hope

author
#0 lore raw

Ever since I started playing with suspend I started turning on PCI Hot Plug support.... since then I have been seeing messages like whats below from dmesg.... I'm not exactly sure how this actually impacts me if it does at all. I just thought it didn't look exactly right so I wanted to inquire about it. Does anyone know what is going on here?

-Ryan

pci_hotplug: PCI Hot Plug PCI Core version: 0.5
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
decode_hpp: Could not get hotplug parameters. Use defaults
pciehp: HPC vendor_id 8086 device_id 27d0 ss_vid 0 ss_did 0 Evaluate _OSC Set fails. Status = 0x0005
Evaluate _OSC Set fails. Status = 0x0005
pciehp: Cannot get control of hotplug hardware for pci 0000:00:1c.0
pciehp: HPC vendor_id 8086 device_id 27d2 ss_vid 0 ss_did 0 Evaluate _OSC Set fails. Status = 0x0005
Evaluate _OSC Set fails. Status = 0x0005
pciehp: Cannot get control of hotplug hardware for pci 0000:00:1c.1
pciehp: HPC vendor_id 8086 device_id 27d4 ss_vid 0 ss_did 0 Evaluate _OSC Set fails. Status = 0x0005
Evaluate _OSC Set fails. Status = 0x0005
pciehp: Cannot get control of hotplug hardware for pci 0000:00:1c.2
pciehp: HPC vendor_id 8086 device_id 27d6 ss_vid 0 ss_did 0 Evaluate _OSC Set fails. Status = 0x0005
Evaluate _OSC Set fails. Status = 0x0005
pciehp: Cannot get control of hotplug hardware for pci 0000:00:1c.3
pciehp: HPC vendor_id 8086 device_id 27e0 ss_vid 0 ss_did 0 Evaluate _OSC Set fails. Status = 0x0005
Evaluate _OSC Set fails. Status = 0x0005
pciehp: Cannot get control of hotplug hardware for pci 0000:00:1c.4
pciehp: HPC vendor_id 8086 device_id 27e2 ss_vid 0 ss_did 0 Evaluate _OSC Set fails. Status = 0x0005
Evaluate _OSC Set fails. Status = 0x0005
pciehp: Cannot get control of hotplug hardware for pci 0000:00:1c.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4

#1 lore raw
Quoted 8 lines · Ryan Hope

Ever since I started playing with suspend I started turning on PCI Hot Plug support.... since then I have been seeing messages like whats below from dmesg.... I'm not exactly sure how this actually impacts me if it does at all. I just thought it didn't look exactly right so I wanted to inquire about it. Does anyone know what is going on here?

-Ryan

Quoted 7 lines

pci_hotplug: PCI Hot Plug PCI Core version: 0.5
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
decode_hpp: Could not get hotplug parameters. Use defaults
pciehp: HPC vendor_id 8086 device_id 27d0 ss_vid 0 ss_did 0 Evaluate _OSC Set fails. Status = 0x0005
Evaluate _OSC Set fails. Status = 0x0005
pciehp: Cannot get control of hotplug hardware for pci 0000:00:1c.0

Your pci express hotplug controller does not support the proper hotplug capabilities. It's probably a bios issue as Windows doesn't support this just yet (I think Vista now does), so those functions were usually never tested.

You should be able to just ignore them, unless you want to use your pci express hotplug functionality. What kind of hardware is this, a laptop with expresscard? Or something else?

thanks,

greg k-h