2.6.21-rc5-mm1
Subsystems (5)
Andrew Morton
Appliedftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.21-rc5/2.6.21-rc5-mm1/
- The RSDL CPU scheduler is dropped again. I'll do rc5-mm2 with it re-added.
- You may see this:
init/missing_syscalls.c:5:27: error: linux/compile.h: No such file or directory
during compilation. It's probably a parallel-build bug in Sam's tree. Just type make again.
- I dropped davem's net development tree due to a large collision with git-wireless. I figured git-wireless would need more debugging ;)
- The IDE tree has been dropped because of a general mess against the recent IDE merge into mainline. I'll restore it when Bart fixes it up.
Boilerplate:
- See the `hot-fixes' directory for any important updates to this patchset.
- To fetch an -mm tree using git, use (for example)
git-fetch git://git.kernel.org/pub/scm/linux/kernel/git/smurf/linux-trees.git tag v2.6.16-rc2-mm1 git-checkout -b local-v2.6.16-rc2-mm1 v2.6.16-rc2-mm1
- -mm kernel commit activity can be reviewed by subscribing to the mm-commits mailing list.
echo "subscribe mm-commits" | mail [email protected]
- If you hit a bug in -mm and it is not obvious which patch caused it, it is most valuable if you can perform a bisection search to identify which patch introduced the bug. Instructions for this process are at
http://www.zip.com.au/~akpm/linux/patches/stuff/bisecting-mm-trees.txt
But beware that this process takes some time (around ten rebuilds and reboots), so consider reporting the bug first and if we cannot immediately identify the faulty patch, then perform the bisection search.
- When reporting bugs, please try to Cc: the relevant maintainer and mailing list on any email.
- When reporting bugs in this kernel via email, please also rewrite the email Subject: in some manner to reflect the nature of the bug. Some developers filter by Subject: when looking for messages to read.
- Occasional snapshots of the -mm lineup are uploaded to ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/mm/ and are announced on the mm-commits list.
Changes since 2.6.21-rc4-mm1:
origin.patch
git-acpi.patch
git-alsa.patch
git-agpgart.patch
git-arm.patch
git-avr32.patch
git-cpufreq.patch
git-powerpc.patch
git-drm.patch
git-dvb.patch
git-gfs2-nmw.patch
git-hid.patch
git-ia64.patch
git-ieee1394.patch
git-infiniband.patch
git-input.patch
git-kbuild.patch
git-kvm.patch
git-leds.patch
git-libata-all.patch
git-md-accel.patch
git-mips.patch
git-mmc.patch
git-mtd.patch
git-ubi.patch
git-netdev-all.patch
git-ioat.patch
git-ocfs2.patch
git-parisc.patch
git-r8169.patch
git-selinux.patch
git-pciseg.patch
git-s390.patch
git-scsi-misc.patch
git-scsi-rc-fixes.patch
git-unionfs.patch
git-watchdog.patch
git-wireless.patch
git-wireless-fixup.patch
git-ipwireless_cs.patch
git-gccbug.patch
git trees
-drivers-char-agp-convert-to-generic-boolean.patch -jdelvare-i2c-i2c-amd8111-missed-cleanup.patch -jdelvare-i2c-i2c-i801-restore-initial-state.patch -jdelvare-i2c-ds1374-check-for-workqueue-creation.patch -cxgb3-add-sw-lro-support.patch -8139too-fix-irq-problem-with-napi-netpoll.patch -div64_64-common-code.patch -allow-pktgen-to-work-with-loopback-devices.patch -remove-unused-header-file-drivers-net-wan-lmc-lmc_mediah.patch -smc-superio-chip-lpc47n227-not-identified-properly.patch -mpt-fusion-handle-pci-layer-error-on-resume.patch -mpt-fusion-handle-mpt_resume-failure-while-resuming.patch -fusion-kernel-doc-warning-fixes.patch -unionfs-sioq-not-__exit.patch -gregkh-usb-usb-fix-usb-serial-regression.patch -gregkh-usb-usb-two-more-device-ids-for-dm9601-usbnet-driver.patch -gregkh-usb-usb-razr-v3i-unusual_devs.patch -gregkh-usb-usb-necessary-update-for-mos7720-driver.patch -gregkh-usb-airprime-usb-id-for-novatel-ev620-mini-pci-e-card.patch -gregkh-usb-usb-fix-gadget-serial-response-on-usb_cdc_req_set_line_coding.patch -usb-serial-io_edgeport-convert-to-generic-boolean.patch -make-xfs-workqueues-nonfreezable.patch -uhci-fix-problem-caused-by-lack-of-terminating-qh.patch -blackfin-blackfin-i2c-driver-update-2.patch -remove-unused-header-file-arch-um-kernel-tt-include-mode_kern-tth.patch -complain-about-missing-system-calls.patch -complain-about-missing-system-calls-update.patch -ptrace-needs-proc_fs.patch
Merged into mainline or a subsystem tree.
+knfsd-allow-nfsd-readdir-to-return-64bit-cookies.patch +knfsd-nfsd4-fix-inheritance-flags-on-v4-ace-derived-from-posix-default-ace.patch +knfsd-nfsd4-demote-clientid-in-use-printk-to-a-dprintk.patch +knfsd-nfsd4-remove-superfluous-cancel_delayed_work-call.patch +md-allow-raid4-arrays-to-be-reshaped.patch +md-clear-the-congested_fn-when-stopping-a-raid5.patch +md-convert-compile-time-warnings-into-runtime-warnings.patch +generic_serial-fix-decoding-of-baud-rate.patch +correct-slow-acpi_pm-rating.patch +isdn-fix-bchannel_bh-call-from-isar_bh.patch
+uml-fix-epoll.patch
+tty-minor-merge-correction.patch +utsns-fix-config_uts_ns-behavior.patch +drivers-spi-fix-section-mismatches.patch +uml-fix-static-linking.patch +uml-use-correct-register-file-size-everywhere.patch +ntp-avoid-time_offset-overflows.patch +ntp-avoid-time_offset-overflows-fix.patch +drivers-eisa-pci_eisacpci_eisa_init-should-be-init.patch +fix-struct-device-member-name-in-pcmcia-au1000_generic.patch +block-io-errors-on-i2o-disk.patch +ipcns-fix-config_ipc_ns-behavior.patch +i2o-remove-markus-from-maintainers.patch +fix-kernel-build-with-embedded-proc_fs-proc_sysctl.patch
2.6.21 queue.
+hrtimers-fix-reprogramming-smp-race.patch
Probaby 2.6.21.
+x86-msr-add-support-for-safe-variants.patch
+net-sunrpc-svcsockc-fix-a-check.patch
Probably 2.6.22 material
+cpuidle-fix-boot-hang.patch
+cpuidle-unsigned-bitfield.patch
+acpi-dock-use-null-for-pointer.patch
ACPI fixes
+git-avr32-fixup.patch
Fix rejects in git-arv32.patch
-ibmebus-uevent-support.patch
Broken.
+ibmebus-change-probe-remove-interface-from-using-loc-code-to-dt-path.patch
powerpc update
+gregkh-driver-kobject-kobject_shadow_add-cleanup.patch
Driver tree update
-uevent-improve-error-checking-and-handling.patch -uevent-use-add_uevent_var-instead-of-open-coding-it.patch -kobject-kobject_shadow_add-cleanup.patch -driver-core-handles-kobject_uevent-failure-while-device_add.patch -driver-core-handle-sysfs_op-failure-while-device_add.patch
Dropped due to firmware loader problems in rc4-mm1.
+fix-firmware-sample-code.patch
Firmware loader documentation fix
+jdelvare-i2c-i2c-08-i2c_new_probed_device.patch +jdelvare-i2c-i2c-09-document-i2c_new_device.patch +jdelvare-i2c-i2c-algo-sgi-cleanup.patch +jdelvare-i2c-i2c-blackfin-new-bus-driver.patch
I2C tree updates
+jdelvare-hwmon-hwmon-coretemp-new-driver.patch +jdelvare-hwmon-hwmon-coretemp-documentation.patch
hwmon tree updates
+apple-smc-driver-hardware-monitoring-and-control.patch
Macpro sensor driver
+git-ieee1394-vs-gregkh-driver-driver-core-use-attribute-groups-in-struct-device_type.patch
Fix clash between Stefan and Greg.
+git-libata-all-ipr-fix.patch
Fix git-libata-all bug.
+optional-led-trigger-for-libata.patch +libata-misc-minor-merge-fixups.patch +pata_pdc202xx_old-lba48-bug.patch +pata_hpt37x-further-small-fixes.patch +pata_hpt3x2n-add-hpt371n-support-and-other-bits.patch +pata_pdc2027x-bring-into-line-with-changes-add-the-mode.patch
sata/pata stuff
-ide-cmd64x-remove-broken-sw-mw-dma-support.patch -ide-sl82c105-rework-pio-support.patch -ide-sl82c105-dma-support-code-cleanup-take3.patch -ide-cmd64x-interrupt-status-fixes-resend.patch -ide-cmd64x-add-fix-enablebits.patch -ide-cmd64x-procfs-code-fixes-cleanups.patch -ide-cmd64x-use-interrupt-status-from-mrdmode-register.patch -ide-cmd64x-add-back-mwdma-support.patch -ide-ide-fix-dma-masks-v3.patch -ide-ide-max-dma-mode-v3.patch -ide-ide-tune-dma-helper.patch -ide-ide-proc-fs.patch -ide-ide-split-off-ioctls-from-settings-v2.patch -ide-ide-move-settings-to-ide-proc.patch -ide-ide-fix-cable-checks.patch -ide-alim15x3-pio-fallback-fix.patch -ide-alim15x3-use-ide-tune-dma.patch -ide-pdc202xx_new-use-ide-tune-dma.patch -ide-ide-register-hw-initializing-arg.patch -ide-ide-proc-register-port.patch -ide-ide-pci-pcibus-order.patch -ide-pdc202xx_old-rewrite-mode-programming-v2.patch -ide-serverworks-pio-mode-setup-fixes.patch -ide-sis5513-pio-mode-setup-fixes.patch -ide-ide-fix-pio-setup-on-resume-for-atapi.patch -ide-it821x-pio-mode-setup-fixes.patch -ide-siimage-swdma-mask-fix.patch -ide-ide-cris-fix-speedproc-and-swdma-mask.patch -ide-ide-dma-off-quietly-fix.patch -ide-ide-no-mdma-udma-sharing-filter.patch -ide-ide-tune-dma-2.patch -ide-cs5530-sc1200-dma-cleanup.patch -ide-cs5530-sc1200-add-speedproc.patch -ide-sl82c105-add-speedproc.patch -ide-ide-dma-enable.patch -ide-ide-check-dma-words-validity.patch -ide-ide-remove-ide-use-dma.patch
Some were merged into mainline, the rest were dropped.
+mtd-support-for-auto-locking-flash-on-power-up.patch
MTD featurette.
+forcedeth-fix-nic-poll.patch +forcedeth-fix-tx-timeout.patch +forcedeth-work-around-null-skb-dereference-crash.patch +forcedeth-work-around-null-skb-dereference-crash-fix.patch
Forcedeth fixes
+fix-irq-problem-with-napi-netpoll.patch +delete-unused-header-file-linux-sdla_frh.patch +delete-unused-header-file-linux-if_wanpipe_commonh.patch +net-tun-tap-fixed-hw-address-handling.patch
net fixes
-net-uninline-skb_put.patch
-net-uninline-skb_put-fix.patch
Dropped
+pcmcia-allow-pcmcia-scsi-drivers-to-be-built-into-the.patch
pcmcia fix
+gregkh-pci-pci-fix-multiple-definition-of-queue_pushbutton_work.patch +gregkh-pci-pci-kernel-doc-fix.patch +gregkh-pci-pci-piggy-bus.patch
PCI tree updates
+fix-gregkh-pci-pci-piggy-bus.patch +fix-gregkh-pci-pci-cleanup-the-includes-of-linux-pcih.patch
Fix it.
+msi-read-flush-msi-x-table.patch
MSI fix
+scsi-spi-transport-scsi-domain-validation-after-reset.patch +scsi-newstyle-hotplug-coldplug-support.patch +use-unchecked_isa_dma-in-sd_revalidate_disk.patch +make-mptspi_target_destroy-static.patch +fdomainc-get-rid-of-unused-stuff.patch
SCSI fixes
+gregkh-usb-usb-io_edgeport-race-condition-in-counters.patch +gregkh-usb-usb-overhaul-of-mos7840-driver.patch +gregkh-usb-usb-io_edgeport-convert-to-generic-boolean.patch +gregkh-usb-usb-dm9601-fix-sparse-null-warnings.patch +gregkh-usb-usb-iowarriorc-fix-null-dereference.patch +gregkh-usb-usb-gtcoc-fix-a-use-before-check.patch +gregkh-usb-usb-fix-endianness-in-mos7720.patch +gregkh-usb-uhci-add-some-warn_ons.patch +gregkh-usb-usb-omninet-memory-leak-in-error-case.patch +gregkh-usb-option-close-race.patch
+gregkh-usb-usb-sierra-close-race.patch +gregkh-usb-usb-ati_remote2-add-channel-support.patch +gregkh-usb-usb-add-power-level-sysfs-attribute.patch +gregkh-usb-usb-gadget-storage-needs-block.patch +gregkh-usb-usb-make-usbdevices-export-their-device-nodes-instead-of-using-a-separate-class.patch
USB tree updates
-hack-to-make-wireless-work.patch
Dropped.
+lguest-clean-up-some-references-inittext-warnings.patch +lguest-clean-up-some-references-inittext-warnings-2.patch +lguest-optimize-away-copy-in-and-out-of-per-cpu-guest-pages-tidy.patch +lguest-compile-hypervisors-into-the-lg-module-directly.patch
Fix rustystuff
+x86_64-i386-add-command-line-length-to-boot-protocol.patch +yet-another-function-to-load-cr3-register.patch +allow-per-cpu-variables-to-be-page-aligned.patch +i386-gdt-cleanups-use-per-cpu-variables-for-gdt-pda.patch +i386-gdt-cleanups-use-per-cpu-variables-for-gdt-pda-fix.patch +i386-gdt-cleanups-use-per-cpu-gdt-immediately-upon-boot.patch +i386-gdt-cleanups-use-per-cpu-gdt-immediately-upon-boot-fix.patch +i386-gdt-cleanups-clean-up-cpu_init.patch +i386-gdt-cleanups-cleanup-gdt-access.patch +i386-gdt-cleanups-rename-boot_gdt_table-to-boot_gdt.patch +cleanup-rationalize-paravirt-wrappers.patch +fix-x86_64-compilation-with-debug_sig-on.patch +apmc-get-rid-of-unused-variables.patch +apm-remove-the-apm_rtc_is_gmt-config-option.patch +x86_64-use-lru-instead-of-page-index-and-page-private-for-pgd-lists-management.patch
x86 updates
+drivers-mfd-sm501c-fix-an-off-by-one.patch +pci-set-pci=bfsort-for-poweredge-r900.patch +fix-sudden-warps-in-mousedev.patch +fix-sysfs-rom-file-creation-for-bios-rom-shadows.patch +libata-identify-backwards-for-drive-side-cable-detection.patch
Things which I think should be in 2.6.21, but which are supposed to go via subsystem maintainers.
+mm-fix-fault-vs-invalidate-race-for-linear-mappings-fix.patch +mm-fix-fault-vs-invalidate-race-for-linear-mappings-fix-2.patch
Fix mm-fix-fault-vs-invalidate-race-for-linear-mappings.patch
+mm-debug-check-for-the-fault-vs-invalidate-race.patch
Add debug check.
+i386-add-ptep_test_and_clear_dirtyyoung.patch +i386-use-pte_update_defer-in-ptep_test_and_clear_dirtyyoung.patch +i386-use-pte_update_defer-in-ptep_test_and_clear_dirtyyoung-fix.patch +smaps-add-clear_refs-file-to-clear-reference-fix-fix-2.patch +smaps-add-clear_refs-file-to-clear-reference-cleanup.patch +smaps-use-ptep_test_and_clear_young.patch
More work on the new smaps feature.
+add-pfn_valid_within-helper-for-sub-max_order-hole-detection.patch +anti-fragmentation-switch-over-to-pfn_valid_within.patch +lumpy-move-to-using-pfn_valid_within.patch
New version of lumpy reclaim
+mm-move-common-segment-checks-to-separate-helper-function-v7.patch +mm-move-common-segment-checks-to-separate-helper-function-v7-tidy.patch +slab-use-num_possible_cpus-in-enable_cpucache.patch +slab-dont-allocate-empty-shared-caches.patch +slab-numa-kmem_cache-diet.patch +do-not-disable-interrupts-when-reading-min_free_kbytes.patch
MM updates
+blackfin-arch-2.6.21-rc4-mm1-update.patch +blackfin-arch-fix-struct-dmasg-packing-bug.patch +blackfin-arch-cleanup-cache-header-file.patch +blackfin-arch-fix-reboot-kernel-mounting-spi-flash-print-error-bug.patch +blackfin-arch-fix-compiling-error-in-flat-c-file.patch +blackfin-arch-power-management-replace-firmware-disk-mode.patch +blackfin-arch-add-kdebug-header-file.patch +blackfin-on-chip-rtc-controller-driver-fix-rtc_update_irq-augument.patch +blackfin-blackfin-on-chip-spi-controller-driver-cleanup-and-coding-style-fixing.patch +blackfin-blackfin-on-chip-spi-controller-driver-fix-reboot-kernel-mounting-spi-flash-print-error-bug.patch
Blackfin updates
-nommu-hide-vm_mm-in-nommu-mode.patch
Dropped, but I'll bring this back.
+swsusp-use-inline-functions-for-changing-page-flags.patch +swsusp-do-not-use-page-flags.patch +mm-remove-unused-page-flags.patch +swsusp-fix-error-paths-in-snapshot_open.patch +swsusp-use-gfp_kernel-for-creating-basic-data-structures.patch +rework-pm_ops-pm_disk_mode-kill-misuse.patch +power-management-remove-firmware-disk-mode.patch +power-management-implement-pm_opsvalid-for-everybody.patch +power-management-force-pm_opsvalid-callback-to-be.patch
Swsusp and power-management work.
+array_size-check-for-type-uml-fix.patch
Fix array_size-check-for-type.patch
+uml-move-sigio-testing-to-sigioc.patch +uml-create-archh.patch
+uml-create-as-layouth.patch +uml-move-remaining-useful-contents-of-user_utilh.patch +uml-remove-user_utilh.patch +uml-add-missing-__init-declarations.patch +remove-unused-header-file-arch-um-kernel-tt-include-mode_kern-tth.patch
UML updates
+merge-sys_clone-sys_unshare-nsproxy-and-namespace-fix.patch +merge-sys_clone-sys_unshare-nsproxy-and-namespace-fix-fix.patch +merge-sys_clone-sys_unshare-nsproxy-and-namespace-fix-fix-fix.patch
Fix merge-sys_clone-sys_unshare-nsproxy-and-namespace.patch
+extend-print_symbol-capability-fix.patch
Fix extend-print_symbol-capability.patch
-remove-unused-header-file-include-linux-elfnoteh.patch
Dropped
+proc-maps-protection-fix-3.patch
Change permissions on /proc/pid/maps
+fix-rmmod-read-write-races-in-proc-entries-fix.patch
Fix fix-rmmod-read-write-races-in-proc-entries.patch
+tty-in-tiocsctty-when-we-steal-a-tty-hang-it-up-fix.patch
Fix tty-in-tiocsctty-when-we-steal-a-tty-hang-it-up.patch
+kprobes-fix-sparse-null-warning.patch +add-ability-to-keep-track-of-callers-of-symbol_getput.patch +add-ability-to-keep-track-of-callers-of-symbol_getput-update.patch +update-mtd-use-of-symbol_getput.patch +update-dvb-use-of-symbol_getput.patch +move-die-notifier-handling-to-common-code.patch +move-die-notifier-handling-to-common-code-fixes.patch +move-die-notifier-handling-to-common-code-fixes-2.patch +time-smp-friendly-alignment-of-struct-clocksource.patch +time-smp-friendly-alignment-of-struct-clocksource-fix.patch +char-rocket-add-module_device_table.patch +char-cs5535_gpio-add-module_device_table.patch +turn-do_sync_file_range-into-do_sync_mapping_range.patch +remove-do_sync_file_range.patch +protect-tty-drivers-list-with-tty_mutex.patch +fix-bogus-softlockup-warning-with-sysrq-t.patch +fix-sysfs-reclaim-crash.patch
+# more-scheduled-oss-driver-removal.patch: too early? +more-scheduled-oss-driver-removal.patch +schedule-obsolete-oss-drivers-for-removal-4th-round.patch +delete-unused-header-file-math-emu-extendedh.patch +fix-sscanf-%n-match-at-end-of-input-string.patch +fix-sscanf-%n-match-at-end-of-input-string-tidy.patch +make-remove_inode_dquot_ref-static.patch +fix-race-between-attach_task-and-cpuset_exit.patch +delete-unused-header-file-linux-awe_voiceh.patch +kernel-irq-procc-unprotected-iteration-over-the-irq-action-list-in-name_unique.patch +parport-dev-driver-model-support.patch +legacy-pc-parports-support-parport-dev.patch +layered-parport-code-uses-parport-dev.patch
Misc
+ext4-use-null-for-pointers.patch
ext4 cleanup
+minor-spi_butterfly-cleanup.patch
SPI cleanup
+remove-nfs4_acl_add_ace.patch
NFSD cleanup
-lists-add-list-splice-tail.patch
-sched-remove-sleepavg-from-proc.patch
-sched-remove-noninteractive-flag.patch
-sched-dont-renice-kernel-threads.patch
-sched-implement-rsdl-cpu-scheduler.patch
-sched-document-rsdl-cpu-scheduler.patch
RSDL is dropped
+declare-struct-ktime.patch +futex-priority-based-wakeup.patch +make-futex_wait-use-an-hrtimer-for-timeout.patch +make-futex_wait-use-an-hrtimer-for-timeout-fix.patch +make-futex_wait-use-an-hrtimer-for-timeout-fix-2.patch +futex_requeue_pi-optimization.patch +sys_futex64-allows-64bit-futexes.patch +sys_futex64-allows-64bit-futexes-fix.patch +sys_futex64-allows-64bit-futexes-workaround.patch
futex features
-add-ability-to-keep-track-of-callers-of-symbol_getput.patch -add-ability-to-keep-track-of-callers-of-symbol_getput-update.patch -update-mtd-use-of-symbol_getput.patch -update-dvb-use-of-symbol_getput.patch
I think Sam merged this
-remove-the-likelypid-check-in-copy_process.patch
Dropped
+dont-init-pgrp-and-__session-in-init_signals.patch
Cleanup
+revoke-core-code-fs-revokec-cleanups-and-bugfix-for-64bit-systems.patch +revoke-core-code-revoke-no-revoke-for-nommu.patch
More work on the revoke() patches
+dm-call-clone_init-early.patch +dm-do-not-access-the-bio-after-generic_make_request.patch +dm-get-rid-of-first_clone-in-dm-crypt.patch +dm-allocate-smaller-clones.patch
DM fixes
+integrity-service-api-and-dummy-provider-integrity_dummy_verify_metadata.patch +slim-main-lsm-getprocattr-hook-api-change.patch +slim-integrity-patch.patch
+integrity-new-hooks.patch
+integrity-new-hooks-fix.patch
+integrity-fs-hook-placement.patch +integrity-evm-as-an-integrity-service-provider.patch +integrity-evm-as-an-integrity-service-provider-tidy.patch +integrity-evm-as-an-integrity-service-provider-tidy-fix.patch +integrity-evm-as-an-integrity-service-provider-tidy-fix-2.patch +integrity-ima-integrity_measure-support.patch +integrity-ima-integrity_measure-support-tidy.patch +integrity-ima-integrity_measure-support-fix.patch +integrity-ima-integrity_measure-support-fix-2.patch +#integrity-mtime-patch-for-mmap-files.patch +integrity-tpm-internal-kernel-interface.patch +integrity-tpm-internal-kernel-interface-tidy.patch +ibac-patch.patch
Integrity driver feature work.
+vdso-print-fatal-signals-fix-compiling-error-bug-in.patch
Fix vdso-print-fatal-signals-use-ctl_unnumbered.patch
+mm-only-hrtimers-debug-patch.patch
+mm-only-hrtimers-debug-patch-fix.patch
hrtimers debug stuff.
All 1077 patches:
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.21-rc5/2.6.21-rc5-mm1/patch-list
From: Andrew Morton <[email protected]>
Date: Mon, 26 Mar 2007 20:57:06 -0800
Quoted 2 lines
- I dropped davem's net development tree due to a large collision with git-wireless. I figured git-wireless would need more debugging ;)
I sent some email to John Linville in order to discuss ways to resolve this so you can import all of our work.
I believe John is away for a few days so whenever he gets back to reading email we'll work this out.
Quoted 2 lines · Andrew Morton
- The IDE tree has been dropped because of a general mess against the recent IDE merge into mainline. I'll restore it when Bart fixes it up.
fixed
Quoted 2 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.21-rc5/2.6.21-rc5-mm1/
LD init/built-in.o
LD .tmp_vmlinux1
ld: section .vsyscall_1 [0000000000645400 -> 000000000064542e] overlaps section .jiffies [0000000000645400 -> 0000000000645407]
ld: .tmp_vmlinux1: section .vsyscall_1 lma 0x645400 overlaps previous sections
make: *** [.tmp_vmlinux1] Error 1
Thanks,
Badari
Quoted 5 lines · On Tue, 27 Mar 2007 09:39:33 -0800 Badari Pulavarty <[email protected]> wrote:
Quoted 2 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.21-rc5/2.6.21-rc5-mm1/
Quoted 8 lines
LD
init/built-in.o
LD .tmp_vmlinux1
ld: section .vsyscall_1 [0000000000645400 ->000000000064542e] overlaps section .jiffies [0000000000645400 -> 0000000000645407]
ld: .tmp_vmlinux1: section .vsyscall_1 lma0x645400overlaps previous sections
make: *** [.tmp_vmlinux1] Error 1
bah. Please send .config.
Quoted 16 lines · Andrew Morton
Quoted 5 lines · On Tue, 27 Mar 2007 09:39:33 -0800 Badari Pulavarty <[email protected]> wrote:
Quoted 2 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.21-rc5/2.6.21-rc5-mm1/
Quoted 8 lines
LD
init/built-in.o
LD .tmp_vmlinux1
ld: section .vsyscall_1 [0000000000645400 ->000000000064542e] overlaps section .jiffies [0000000000645400 -> 0000000000645407]
ld: .tmp_vmlinux1: section .vsyscall_1 lma0x645400overlaps previous sections
make: *** [.tmp_vmlinux1] Error 1
Quoted 1 line
bah. Please send .config.
#
# Automatically generated make config: don't edit # Linux kernel version: 2.6.21-rc5-mm1
# Tue Mar 27 10:29:10 2007
#CONFIG_X86_64=yCONFIG_64BIT=yCONFIG_X86=yCONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=yCONFIG_ZONE_DMA32=yCONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=yCONFIG_MMU=yCONFIG_ZONE_DMA=yCONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_X86_CMPXCHG=yCONFIG_EARLY_PRINTK=yCONFIG_GENERIC_ISA_DMA=yCONFIG_GENERIC_IOMAP=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_ARCH_POPULATES_NODE_MAP=yCONFIG_DMI=yCONFIG_AUDIT_ARCH=yCONFIG_GENERIC_BUG=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#CONFIG_EXPERIMENTAL=yCONFIG_LOCK_KERNEL=yCONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#CONFIG_LOCALVERSION=""CONFIG_LOCALVERSION_AUTO=yCONFIG_SWAP=y
# CONFIG_SWAP_PREFETCH is not setCONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not setCONFIG_SYSVIPC_SYSCTL=yCONFIG_POSIX_MQUEUE=yCONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not setCONFIG_IKCONFIG=yCONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not setCONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not setCONFIG_BLK_DEV_INITRD=yCONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not setCONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not setCONFIG_UID16=yCONFIG_SYSCTL_SYSCALL=yCONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not setCONFIG_HOTPLUG=yCONFIG_PRINTK=yCONFIG_BUG=yCONFIG_ELF_CORE=yCONFIG_BASE_FULL=yCONFIG_FUTEX=yCONFIG_EPOLL=yCONFIG_SHMEM=yCONFIG_SLAB=yCONFIG_VM_EVENT_COUNTERS=yCONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not setCONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
# CONFIG_PAGE_GROUP_BY_MOBILITY is not set
#
# Loadable module support
#CONFIG_MODULES=yCONFIG_MODULE_UNLOAD=yCONFIG_MODULE_FORCE_UNLOAD=yCONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not setCONFIG_KMOD=yCONFIG_STOP_MACHINE=y
#
# Process debugging support
#CONFIG_UTRACE=yCONFIG_PTRACE=y
#
# Block layer
#CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
#
# IO Schedulers
#CONFIG_IOSCHED_NOOP=yCONFIG_IOSCHED_AS=yCONFIG_IOSCHED_DEADLINE=yCONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not setCONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not setCONFIG_DEFAULT_IOSCHED="cfq"
#
# Processor type and features
#CONFIG_X86_PC=y
# CONFIG_X86_VSMP is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set CONFIG_GENERIC_CPU=y CONFIG_X86_L1_CACHE_BYTES=128 CONFIG_X86_L1_CACHE_SHIFT=7 CONFIG_X86_INTERNODE_CACHE_BYTES=128 CONFIG_X86_TSC=yCONFIG_X86_GOOD_APIC=yCONFIG_MICROCODE=m CONFIG_MICROCODE_OLD_INTERFACE=y CONFIG_X86_MSR=mCONFIG_X86_CPUID=mCONFIG_X86_HT=yCONFIG_X86_IO_APIC=yCONFIG_X86_LOCAL_APIC=yCONFIG_MTRR=yCONFIG_SMP=yCONFIG_SCHED_SMT=yCONFIG_SCHED_MC=yCONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set CONFIG_PREEMPT_BKL=yCONFIG_NUMA=yCONFIG_K8_NUMA=yCONFIG_NODES_SHIFT=6 CONFIG_X86_64_ACPI_NUMA=y
# CONFIG_NUMA_EMU is not set CONFIG_ARCH_DISCONTIGMEM_ENABLE=y CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set CONFIG_DISCONTIGMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set CONFIG_DISCONTIGMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_MEMORY_HOTPLUG is not set CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=yCONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1
# CONFIG_ADAPTIVE_READAHEAD is not set CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y CONFIG_OUT_OF_LINE_PFN_TO_PAGE=y CONFIG_NR_CPUS=64
# CONFIG_HOTPLUG_CPU is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=yCONFIG_IOMMU=yCONFIG_CALGARY_IOMMU=y
# CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT is not set CONFIG_SWIOTLB=yCONFIG_X86_MCE=yCONFIG_X86_MCE_INTEL=yCONFIG_X86_MCE_AMD=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set CONFIG_PHYSICAL_START=0x200000 CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not setCONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not setCONFIG_HZ=250
# CONFIG_REORDER is not setCONFIG_K8_NB=yCONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_ISA_DMA_API=y CONFIG_GENERIC_PENDING_IRQ=y
#
# Power management options
#CONFIG_PM=yCONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
# CONFIG_PM_SYSFS_DEPRECATED is not set
#
# ACPI (Advanced Configuration and Power Interface) Support #CONFIG_ACPI=y
# CONFIG_ACPI_PROCFS is not setCONFIG_ACPI_AC=mCONFIG_ACPI_BATTERY=mCONFIG_ACPI_BUTTON=m
# CONFIG_ACPI_VIDEO is not setCONFIG_ACPI_FAN=m
# CONFIG_ACPI_DOCK is not set CONFIG_ACPI_PROCESSOR=mCONFIG_ACPI_THERMAL=mCONFIG_ACPI_NUMA=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_CUSTOM_DSDT is not set CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not setCONFIG_ACPI_EC=yCONFIG_ACPI_POWER=yCONFIG_ACPI_SYSTEM=yCONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_SBS is not set
#
# CPU Frequency scaling
#CONFIG_CPU_FREQ=yCONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_USERSPACE=m CONFIG_CPU_FREQ_GOV_ONDEMAND=m
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
#
# CPUFreq processor drivers
#CONFIG_X86_POWERNOW_K8=mCONFIG_X86_POWERNOW_K8_ACPI=yCONFIG_X86_SPEEDSTEP_CENTRINO=mCONFIG_X86_ACPI_CPUFREQ=m
#
# shared options # # CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set # CONFIG_X86_SPEEDSTEP_LIB is not set
#
# CPU idle PM support
#
# CONFIG_CPU_IDLE is not set
#
# Bus options (PCI etc.)
#CONFIG_PCI=yCONFIG_PCI_DIRECT=yCONFIG_PCI_MMCONFIG=y
# CONFIG_PCI_DOMAINS is not set
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_DEBUG is not setCONFIG_HT_IRQ=y
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#CONFIG_HOTPLUG_PCI=mCONFIG_HOTPLUG_PCI_FAKE=m
# CONFIG_HOTPLUG_PCI_ACPI is not setCONFIG_HOTPLUG_PCI_CPCI=yCONFIG_HOTPLUG_PCI_CPCI_ZT5550=mCONFIG_HOTPLUG_PCI_CPCI_GENERIC=mCONFIG_HOTPLUG_PCI_SHPC=m
#
# Executable file formats / Emulations
#CONFIG_BINFMT_ELF=yCONFIG_BINFMT_MISC=mCONFIG_IA32_EMULATION=yCONFIG_IA32_AOUT=yCONFIG_COMPAT=yCONFIG_SYSVIPC_COMPAT=y
#
# Networking
#CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not setCONFIG_PACKET=mCONFIG_PACKET_MMAP=yCONFIG_UNIX=yCONFIG_XFRM=yCONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not setCONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not setCONFIG_INET=yCONFIG_IP_MULTICAST=yCONFIG_IP_ADVANCED_ROUTER=yCONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not setCONFIG_IP_FIB_HASH=yCONFIG_IP_MULTIPLE_TABLES=yCONFIG_IP_ROUTE_MULTIPATH=y
# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not setCONFIG_IP_ROUTE_VERBOSE=yCONFIG_IP_PNP=yCONFIG_IP_PNP_DHCP=yCONFIG_IP_PNP_BOOTP=yCONFIG_IP_PNP_RARP=yCONFIG_NET_IPIP=mCONFIG_NET_IPGRE=mCONFIG_NET_IPGRE_BROADCAST=yCONFIG_IP_MROUTE=yCONFIG_IP_PIMSM_V1=yCONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not setCONFIG_SYN_COOKIES=yCONFIG_INET_AH=mCONFIG_INET_ESP=mCONFIG_INET_IPCOMP=mCONFIG_INET_XFRM_TUNNEL=mCONFIG_INET_TUNNEL=mCONFIG_INET_XFRM_MODE_TRANSPORT=yCONFIG_INET_XFRM_MODE_TUNNEL=yCONFIG_INET_XFRM_MODE_BEET=yCONFIG_INET_DIAG=yCONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not setCONFIG_TCP_CONG_CUBIC=yCONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
#
# IP: Virtual Server Configuration
#CONFIG_IP_VS=m
# CONFIG_IP_VS_DEBUG is not setCONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#CONFIG_IP_VS_PROTO_TCP=yCONFIG_IP_VS_PROTO_UDP=yCONFIG_IP_VS_PROTO_ESP=yCONFIG_IP_VS_PROTO_AH=y
#
# IPVS scheduler
#CONFIG_IP_VS_RR=mCONFIG_IP_VS_WRR=mCONFIG_IP_VS_LC=mCONFIG_IP_VS_WLC=mCONFIG_IP_VS_LBLC=mCONFIG_IP_VS_LBLCR=mCONFIG_IP_VS_DH=mCONFIG_IP_VS_SH=mCONFIG_IP_VS_SED=mCONFIG_IP_VS_NQ=m
#
# IPVS application helper
#CONFIG_IP_VS_FTP=mCONFIG_IPV6=mCONFIG_IPV6_PRIVACY=y
# CONFIG_IPV6_ROUTER_PREF is not set CONFIG_INET6_AH=mCONFIG_INET6_ESP=mCONFIG_INET6_IPCOMP=m
# CONFIG_IPV6_MIP6 is not set CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m CONFIG_INET6_XFRM_MODE_TRANSPORT=m CONFIG_INET6_XFRM_MODE_TUNNEL=m CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=mCONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not set
# CONFIG_NF_CONNTRACK_ENABLED is not set
# CONFIG_NETFILTER_XTABLES is not set
#
# IP: Netfilter Configuration
#CONFIG_IP_NF_QUEUE=m
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#CONFIG_IP6_NF_QUEUE=m
# CONFIG_IP6_NF_IPTABLES is not set
#
# DECnet: Netfilter Configuration
#
# CONFIG_DECNET_NF_GRABULATOR is not set
#
# Bridge: Netfilter Configuration
#CONFIG_BRIDGE_NF_EBTABLES=mCONFIG_BRIDGE_EBT_BROUTE=mCONFIG_BRIDGE_EBT_T_FILTER=mCONFIG_BRIDGE_EBT_T_NAT=mCONFIG_BRIDGE_EBT_802_3=mCONFIG_BRIDGE_EBT_AMONG=mCONFIG_BRIDGE_EBT_ARP=mCONFIG_BRIDGE_EBT_IP=mCONFIG_BRIDGE_EBT_LIMIT=mCONFIG_BRIDGE_EBT_MARK=mCONFIG_BRIDGE_EBT_PKTTYPE=mCONFIG_BRIDGE_EBT_STP=mCONFIG_BRIDGE_EBT_VLAN=mCONFIG_BRIDGE_EBT_ARPREPLY=mCONFIG_BRIDGE_EBT_DNAT=mCONFIG_BRIDGE_EBT_MARK_T=mCONFIG_BRIDGE_EBT_REDIRECT=mCONFIG_BRIDGE_EBT_SNAT=mCONFIG_BRIDGE_EBT_LOG=m
# CONFIG_BRIDGE_EBT_ULOG is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not setCONFIG_SCTP_HMAC_MD5=y
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not setCONFIG_BRIDGE=mCONFIG_VLAN_8021Q=mCONFIG_DECNET=m
# CONFIG_DECNET_ROUTER is not setCONFIG_LLC=yCONFIG_LLC2=mCONFIG_IPX=mCONFIG_IPX_INTERN=yCONFIG_ATALK=mCONFIG_DEV_APPLETALK=mCONFIG_IPDDP=mCONFIG_IPDDP_ENCAP=yCONFIG_IPDDP_DECAP=yCONFIG_X25=mCONFIG_LAPB=mCONFIG_ECONET=m
# CONFIG_ECONET_AUNUDP is not set
# CONFIG_ECONET_NATIVE is not setCONFIG_WAN_ROUTER=m
#
# QoS and/or fair queueing
#CONFIG_NET_SCHED=yCONFIG_NET_SCH_FIFO=y
# CONFIG_NET_SCH_CLK_JIFFIES is not setCONFIG_NET_SCH_CLK_GETTIMEOFDAY=y
# CONFIG_NET_SCH_CLK_CPU is not set
#
# Queueing/Scheduling
#CONFIG_NET_SCH_CBQ=mCONFIG_NET_SCH_HTB=mCONFIG_NET_SCH_HFSC=mCONFIG_NET_SCH_PRIO=mCONFIG_NET_SCH_RED=mCONFIG_NET_SCH_SFQ=mCONFIG_NET_SCH_TEQL=mCONFIG_NET_SCH_TBF=mCONFIG_NET_SCH_GRED=mCONFIG_NET_SCH_DSMARK=m
# CONFIG_NET_SCH_NETEM is not setCONFIG_NET_SCH_INGRESS=m
#
# Classification
#CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not setCONFIG_NET_CLS_TCINDEX=mCONFIG_NET_CLS_ROUTE4=mCONFIG_NET_CLS_ROUTE=yCONFIG_NET_CLS_FW=mCONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
# CONFIG_CLS_U32_MARK is not setCONFIG_NET_CLS_RSVP=mCONFIG_NET_CLS_RSVP6=m
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not setCONFIG_NET_CLS_POLICE=y
# CONFIG_NET_CLS_IND is not setCONFIG_NET_ESTIMATOR=y
#
# Network testing
#CONFIG_NET_PKTGEN=mCONFIG_HAMRADIO=y
#
# Packet Radio protocols
#CONFIG_AX25=mCONFIG_AX25_DAMA_SLAVE=yCONFIG_NETROM=mCONFIG_ROSE=m
#
# AX.25 network device drivers
#
# CONFIG_MKISS is not set
# CONFIG_6PACK is not setCONFIG_BPQETHER=mCONFIG_BAYCOM_SER_FDX=mCONFIG_BAYCOM_SER_HDX=mCONFIG_BAYCOM_PAR=mCONFIG_YAM=mCONFIG_IRDA=m
#
# IrDA protocols
#CONFIG_IRLAN=mCONFIG_IRNET=mCONFIG_IRCOMM=mCONFIG_IRDA_ULTRA=y
#
# IrDA options
#CONFIG_IRDA_CACHE_LAST_LSAP=y
# CONFIG_IRDA_FAST_RR is not set
# CONFIG_IRDA_DEBUG is not set
#
# Infrared-port device drivers
#
#
# SIR device drivers
#CONFIG_IRTTY_SIR=m
#
# Dongle support
#CONFIG_DONGLE=yCONFIG_ESI_DONGLE=mCONFIG_ACTISYS_DONGLE=mCONFIG_TEKRAM_DONGLE=m
# CONFIG_TOIM3232_DONGLE is not setCONFIG_LITELINK_DONGLE=mCONFIG_MA600_DONGLE=mCONFIG_GIRBIL_DONGLE=mCONFIG_MCP2120_DONGLE=mCONFIG_OLD_BELKIN_DONGLE=mCONFIG_ACT200L_DONGLE=m
#
# Old SIR device drivers
#
#
# Old Serial dongle support
#
#
# FIR device drivers
#CONFIG_USB_IRDA=mCONFIG_SIGMATEL_FIR=m
# CONFIG_NSC_FIR is not set
# CONFIG_WINBOND_FIR is not set
# CONFIG_SMC_IRCC_FIR is not set
# CONFIG_ALI_FIR is not setCONFIG_VLSI_FIR=m
# CONFIG_VIA_FIR is not set
# CONFIG_MCS_FIR is not setCONFIG_BT=mCONFIG_BT_L2CAP=mCONFIG_BT_SCO=mCONFIG_BT_RFCOMM=mCONFIG_BT_RFCOMM_TTY=yCONFIG_BT_BNEP=mCONFIG_BT_BNEP_MC_FILTER=yCONFIG_BT_BNEP_PROTO_FILTER=yCONFIG_BT_CMTP=m
# CONFIG_BT_HIDP is not set
#
# Bluetooth device drivers
#CONFIG_BT_HCIUSB=mCONFIG_BT_HCIUSB_SCO=yCONFIG_BT_HCIUART=mCONFIG_BT_HCIUART_H4=yCONFIG_BT_HCIUART_BCSP=yCONFIG_BT_HCIBCM203X=m
# CONFIG_BT_HCIBPA10X is not setCONFIG_BT_HCIBFUSB=mCONFIG_BT_HCIVHCI=mCONFIG_FIB_RULES=y
#
# Wireless
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
# CONFIG_STANDALONE is not setCONFIG_PREVENT_FIRMWARE_BUILD=yCONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker #
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#CONFIG_MTD=m
# CONFIG_MTD_DEBUG is not setCONFIG_MTD_CONCAT=m
# CONFIG_MTD_PARTITIONS is not set
#
# User Modules And Translation Layers
#CONFIG_MTD_CHAR=mCONFIG_MTD_BLKDEVS=mCONFIG_MTD_BLOCK=m
# CONFIG_MTD_BLOCK_RO is not set
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
#
# RAM/ROM/Flash chip drivers
#CONFIG_MTD_CFI=mCONFIG_MTD_JEDECPROBE=mCONFIG_MTD_GEN_PROBE=mCONFIG_MTD_CFI_ADV_OPTIONS=yCONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_GEOMETRY is not setCONFIG_MTD_MAP_BANK_WIDTH_1=yCONFIG_MTD_MAP_BANK_WIDTH_2=yCONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not setCONFIG_MTD_CFI_I1=yCONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_OTP is not setCONFIG_MTD_CFI_INTELEXT=mCONFIG_MTD_CFI_AMDSTD=mCONFIG_MTD_CFI_STAA=mCONFIG_MTD_CFI_UTIL=m
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not setCONFIG_MTD_ABSENT=mCONFIG_MTD_OBSOLETE_CHIPS=yCONFIG_MTD_SHARP=m
#
# Mapping drivers for chip access
#CONFIG_MTD_COMPLEX_MAPPINGS=yCONFIG_MTD_PHYSMAP=mCONFIG_MTD_PHYSMAP_START=0x8000000CONFIG_MTD_PHYSMAP_LEN=0x4000000CONFIG_MTD_PHYSMAP_BANKWIDTH=2
# CONFIG_MTD_SC520CDP is not set
# CONFIG_MTD_TS5500 is not setCONFIG_MTD_AMD76XROM=m
# CONFIG_MTD_ICHXROM is not set
# CONFIG_MTD_ESB2ROM is not set
# CONFIG_MTD_CK804XROM is not setCONFIG_MTD_SCB2_FLASH=m
# CONFIG_MTD_L440GX is not setCONFIG_MTD_PCI=m
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#CONFIG_MTD_PMC551=mCONFIG_MTD_PMC551_BUGFIX=y
# CONFIG_MTD_PMC551_DEBUG is not setCONFIG_MTD_SLRAM=m
# CONFIG_MTD_PHRAM is not setCONFIG_MTD_MTDRAM=mCONFIG_MTDRAM_TOTAL_SIZE=4096CONFIG_MTDRAM_ERASE_SIZE=128
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
#CONFIG_MTD_DOC2000=mCONFIG_MTD_DOC2001=mCONFIG_MTD_DOC2001PLUS=mCONFIG_MTD_DOCPROBE=mCONFIG_MTD_DOCECC=mCONFIG_MTD_DOCPROBE_ADVANCED=yCONFIG_MTD_DOCPROBE_ADDRESS=0x0000CONFIG_MTD_DOCPROBE_HIGH=yCONFIG_MTD_DOCPROBE_55AA=y
#
# NAND Flash Device Drivers
#CONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_NAND_ECC_SMC is not setCONFIG_MTD_NAND_IDS=m
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_CAFE is not set
#
# OneNAND Flash Device Drivers
#
# CONFIG_MTD_ONENAND is not set
#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
#
# Parallel port support
#CONFIG_PARPORT=mCONFIG_PARPORT_PC=mCONFIG_PARPORT_SERIAL=mCONFIG_PARPORT_PC_FIFO=yCONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not setCONFIG_PARPORT_1284=yCONFIG_PARPORT_NOT_PC=y
#
# Plug and Play support
#CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#CONFIG_PNPACPI=y
#
# Block devices
#CONFIG_BLK_DEV_FD=mCONFIG_PARIDE=m
#
# Parallel IDE high-level drivers
#CONFIG_PARIDE_PD=mCONFIG_PARIDE_PCD=mCONFIG_PARIDE_PF=mCONFIG_PARIDE_PT=mCONFIG_PARIDE_PG=m
#
# Parallel IDE protocol modules
#CONFIG_PARIDE_ATEN=mCONFIG_PARIDE_BPCK=mCONFIG_PARIDE_COMM=mCONFIG_PARIDE_DSTR=mCONFIG_PARIDE_FIT2=mCONFIG_PARIDE_FIT3=mCONFIG_PARIDE_EPAT=mCONFIG_PARIDE_EPATC8=yCONFIG_PARIDE_EPIA=mCONFIG_PARIDE_FRIQ=mCONFIG_PARIDE_FRPW=mCONFIG_PARIDE_KBIC=mCONFIG_PARIDE_KTTI=mCONFIG_PARIDE_ON20=mCONFIG_PARIDE_ON26=mCONFIG_BLK_CPQ_DA=mCONFIG_BLK_CPQ_CISS_DA=mCONFIG_CISS_SCSI_TAPE=yCONFIG_BLK_DEV_DAC960=mCONFIG_BLK_DEV_UMEM=m
# CONFIG_BLK_DEV_COW_COMMON is not setCONFIG_BLK_DEV_LOOP=yCONFIG_BLK_DEV_CRYPTOLOOP=mCONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not setCONFIG_BLK_DEV_RAM=yCONFIG_BLK_DEV_RAM_COUNT=16CONFIG_BLK_DEV_RAM_SIZE=128000CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
#
# Misc devices
#CONFIG_IBM_ASM=m
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_ACPI_IBM is not set
#
# ATA/ATAPI/MFM/RLL support
#CONFIG_IDE=yCONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives #
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=yCONFIG_IDEDISK_MULTI_MODE=yCONFIG_BLK_DEV_IDECD=yCONFIG_BLK_DEV_IDETAPE=mCONFIG_BLK_DEV_IDEFLOPPY=yCONFIG_BLK_DEV_IDESCSI=m
# CONFIG_BLK_DEV_IDEACPI is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#CONFIG_IDE_GENERIC=yCONFIG_BLK_DEV_CMD640=yCONFIG_BLK_DEV_CMD640_ENHANCED=y
# CONFIG_BLK_DEV_IDEPNP is not setCONFIG_BLK_DEV_IDEPCI=yCONFIG_IDEPCI_SHARE_IRQ=yCONFIG_BLK_DEV_OFFBOARD=yCONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not setCONFIG_BLK_DEV_RZ1000=yCONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
# CONFIG_IDEDMA_ONLYDISK is not setCONFIG_BLK_DEV_AEC62XX=yCONFIG_BLK_DEV_ALI15X3=y
# CONFIG_WDC_ALI15X3 is not setCONFIG_BLK_DEV_AMD74XX=yCONFIG_BLK_DEV_ATIIXP=yCONFIG_BLK_DEV_CMD64X=yCONFIG_BLK_DEV_TRIFLEX=yCONFIG_BLK_DEV_CY82C693=yCONFIG_BLK_DEV_CS5520=mCONFIG_BLK_DEV_CS5530=mCONFIG_BLK_DEV_HPT34X=yCONFIG_HPT34X_AUTODMA=yCONFIG_BLK_DEV_HPT366=y
# CONFIG_BLK_DEV_JMICRON is not setCONFIG_BLK_DEV_SC1200=yCONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not setCONFIG_BLK_DEV_NS87415=yCONFIG_BLK_DEV_PDC202XX_OLD=yCONFIG_PDC202XX_BURST=yCONFIG_BLK_DEV_PDC202XX_NEW=yCONFIG_BLK_DEV_SVWKS=yCONFIG_BLK_DEV_SIIMAGE=yCONFIG_BLK_DEV_SIS5513=yCONFIG_BLK_DEV_SLC90E66=y
# CONFIG_BLK_DEV_TRM290 is not setCONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_BLK_DEV_TC86C001 is not set
# CONFIG_IDE_ARM is not setCONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not setCONFIG_SCSI=m
# CONFIG_SCSI_TGT is not setCONFIG_SCSI_NETLINK=yCONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=mCONFIG_CHR_DEV_ST=mCONFIG_CHR_DEV_OSST=mCONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not setCONFIG_CHR_DEV_SG=mCONFIG_CHR_DEV_SCH=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs #CONFIG_SCSI_MULTI_LUN=yCONFIG_SCSI_CONSTANTS=yCONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#CONFIG_SCSI_SPI_ATTRS=mCONFIG_SCSI_FC_ATTRS=m
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not setCONFIG_BLK_DEV_3W_XXXX_RAID=mCONFIG_SCSI_3W_9XXX=mCONFIG_SCSI_ACARD=mCONFIG_SCSI_AACRAID=mCONFIG_SCSI_AIC7XXX=mCONFIG_AIC7XXX_CMDS_PER_DEVICE=32CONFIG_AIC7XXX_RESET_DELAY_MS=5000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not setCONFIG_AIC7XXX_DEBUG_MASK=0CONFIG_AIC7XXX_REG_PRETTY_PRINT=yCONFIG_SCSI_AIC7XXX_OLD=mCONFIG_SCSI_AIC79XX=mCONFIG_AIC79XX_CMDS_PER_DEVICE=32CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_DEBUG_ENABLE is not setCONFIG_AIC79XX_DEBUG_MASK=0CONFIG_AIC79XX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_ARCMSR is not setCONFIG_MEGARAID_NEWGEN=yCONFIG_MEGARAID_MM=mCONFIG_MEGARAID_MAILBOX=mCONFIG_MEGARAID_LEGACY=m
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not setCONFIG_SCSI_BUSLOGIC=m
# CONFIG_SCSI_OMIT_FLASHPOINT is not setCONFIG_SCSI_DMX3191D=mCONFIG_SCSI_EATA=mCONFIG_SCSI_EATA_TAGGED_QUEUE=yCONFIG_SCSI_EATA_LINKED_COMMANDS=yCONFIG_SCSI_EATA_MAX_TAGS=16CONFIG_SCSI_FUTURE_DOMAIN=mCONFIG_SCSI_GDTH=mCONFIG_SCSI_IPS=m
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not setCONFIG_SCSI_PPA=mCONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
# CONFIG_SCSI_STEX is not setCONFIG_SCSI_SYM53C8XX_2=mCONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64CONFIG_SCSI_SYM53C8XX_MMIO=yCONFIG_SCSI_QLOGIC_1280=mCONFIG_SCSI_QLA_FC=m
# CONFIG_SCSI_QLA_ISCSI is not setCONFIG_SCSI_LPFC=m
CONFIG_SCSI_DC395x=mCONFIG_SCSI_DC390T=mCONFIG_SCSI_DEBUG=m
# CONFIG_SCSI_SRP is not set
#
# Serial ATA (prod) and Parallel ATA (experimental) drivers #
# CONFIG_ATA is not set
#
# Multi-device support (RAID and LVM)
#CONFIG_MD=yCONFIG_BLK_DEV_MD=yCONFIG_MD_LINEAR=mCONFIG_MD_RAID0=mCONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID456 is not setCONFIG_MD_MULTIPATH=m
# CONFIG_MD_FAULTY is not setCONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not setCONFIG_DM_CRYPT=mCONFIG_DM_SNAPSHOT=mCONFIG_DM_MIRROR=mCONFIG_DM_ZERO=mCONFIG_DM_MULTIPATH=mCONFIG_DM_MULTIPATH_EMC=m
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not setCONFIG_IEEE1394=m
#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not setCONFIG_IEEE1394_EXTRA_CONFIG_ROMS=yCONFIG_IEEE1394_CONFIG_ROM_IP1394=y
#
# Device Drivers
#CONFIG_IEEE1394_PCILYNX=mCONFIG_IEEE1394_OHCI1394=m
#
# Protocol Drivers
#CONFIG_IEEE1394_VIDEO1394=mCONFIG_IEEE1394_SBP2=mCONFIG_IEEE1394_ETH1394=mCONFIG_IEEE1394_DV1394=mCONFIG_IEEE1394_RAWIO=m
#
# I2O device support
#CONFIG_I2O=mCONFIG_I2O_LCT_NOTIFY_ON_CHANGES=yCONFIG_I2O_EXT_ADAPTEC=yCONFIG_I2O_EXT_ADAPTEC_DMA64=yCONFIG_I2O_CONFIG=mCONFIG_I2O_CONFIG_OLD_IOCTL=y
# CONFIG_I2O_BUS is not setCONFIG_I2O_BLOCK=mCONFIG_I2O_SCSI=mCONFIG_I2O_PROC=m
#
# Macintosh device drivers
#
# CONFIG_MAC_EMUMOUSEBTN is not set
#
# Network device support
#CONFIG_NETDEVICES=yCONFIG_DUMMY=mCONFIG_BONDING=mCONFIG_EQUALIZER=mCONFIG_TUN=m
# CONFIG_NET_SB1000 is not set
#
# ARCnet devices
#CONFIG_ARCNET=mCONFIG_ARCNET_1201=mCONFIG_ARCNET_1051=mCONFIG_ARCNET_RAW=m
# CONFIG_ARCNET_CAP is not set
CONFIG_ARCNET_COM90xx=m
CONFIG_ARCNET_COM90xxIO=mCONFIG_ARCNET_RIM_I=m
# CONFIG_ARCNET_COM20020 is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#CONFIG_NET_ETHERNET=yCONFIG_MII=mCONFIG_HAPPYMEAL=mCONFIG_SUNGEM=m
# CONFIG_CASSINI is not setCONFIG_NET_VENDOR_3COM=yCONFIG_VORTEX=mCONFIG_TYPHOON=m
#
# Tulip family network device support
#CONFIG_NET_TULIP=yCONFIG_DE2104X=mCONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not setCONFIG_TULIP_NAPI=yCONFIG_TULIP_NAPI_HW_MITIGATION=yCONFIG_DE4X5=mCONFIG_WINBOND_840=mCONFIG_DM9102=m
# CONFIG_ULI526X is not setCONFIG_HP100=mCONFIG_NET_PCI=yCONFIG_PCNET32=m
# CONFIG_PCNET32_NAPI is not setCONFIG_AMD8111_ETH=m
# CONFIG_AMD8111E_NAPI is not setCONFIG_ADAPTEC_STARFIRE=mCONFIG_ADAPTEC_STARFIRE_NAPI=yCONFIG_B44=mCONFIG_B44_PCI=yCONFIG_FORCEDETH=m
# CONFIG_FORCEDETH_NAPI is not setCONFIG_DGRS=mCONFIG_EEPRO100=mCONFIG_E100=mCONFIG_FEALNX=mCONFIG_NATSEMI=mCONFIG_NE2K_PCI=mCONFIG_8139CP=mCONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not setCONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not setCONFIG_SIS900=mCONFIG_EPIC100=mCONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not setCONFIG_VIA_RHINE=m
# CONFIG_VIA_RHINE_MMIO is not set
# CONFIG_VIA_RHINE_NAPI is not set
# CONFIG_SC92031 is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not setCONFIG_DL2K=mCONFIG_E1000=mCONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not setCONFIG_NS83820=mCONFIG_HAMACHI=mCONFIG_YELLOWFIN=mCONFIG_R8169=m
# CONFIG_R8169_NAPI is not set
# CONFIG_R8169_VLAN is not setCONFIG_SIS190=m
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not setCONFIG_SK98LIN=m
# CONFIG_VIA_VELOCITY is not setCONFIG_TIGON3=y
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not setCONFIG_IXGB=mCONFIG_IXGB_NAPI=yCONFIG_S2IO=mCONFIG_S2IO_NAPI=y
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_VIOC is not set
#
# Token Ring devices
#CONFIG_TR=yCONFIG_IBMOL=mCONFIG_3C359=mCONFIG_TMS380TR=mCONFIG_TMSPCI=mCONFIG_ABYSS=m
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_RTL818X is not set
#
# Wan interfaces
#
# CONFIG_WAN is not setCONFIG_FDDI=y
# CONFIG_DEFXX is not setCONFIG_SKFP=mCONFIG_HIPPI=yCONFIG_ROADRUNNER=mCONFIG_ROADRUNNER_LARGE_RINGS=yCONFIG_PLIP=mCONFIG_PPP=mCONFIG_PPP_MULTILINK=yCONFIG_PPP_FILTER=yCONFIG_PPP_ASYNC=mCONFIG_PPP_SYNC_TTY=mCONFIG_PPP_DEFLATE=mCONFIG_PPP_BSDCOMP=mCONFIG_PPP_MPPE=mCONFIG_PPPOE=mCONFIG_SLIP=mCONFIG_SLIP_COMPRESSED=yCONFIG_SLHC=mCONFIG_SLIP_SMART=yCONFIG_SLIP_MODE_SLIP6=yCONFIG_NET_FC=yCONFIG_SHAPER=mCONFIG_NETCONSOLE=mCONFIG_NETPOLL=yCONFIG_NETPOLL_RX=yCONFIG_NETPOLL_TRAP=yCONFIG_NET_POLL_CONTROLLER=y
#
# ISDN subsystem
#CONFIG_ISDN=m
#
# Old ISDN4Linux
#CONFIG_ISDN_I4L=mCONFIG_ISDN_PPP=yCONFIG_ISDN_PPP_VJ=yCONFIG_ISDN_MPP=yCONFIG_IPPP_FILTER=yCONFIG_ISDN_PPP_BSDCOMP=mCONFIG_ISDN_AUDIO=yCONFIG_ISDN_TTY_FAX=yCONFIG_ISDN_X25=y
#
# ISDN feature submodules
#
# CONFIG_ISDN_DIVERSION is not set
#
# ISDN4Linux hardware drivers
#
#
# Passive cards
#CONFIG_ISDN_DRV_HISAX=m
#
# D-channel protocol features
#CONFIG_HISAX_EURO=yCONFIG_DE_AOC=y
# CONFIG_HISAX_NO_SENDCOMPLETE is not set
# CONFIG_HISAX_NO_LLC is not set
# CONFIG_HISAX_NO_KEYPAD is not setCONFIG_HISAX_1TR6=yCONFIG_HISAX_NI1=yCONFIG_HISAX_MAX_CARDS=8
#
# HiSax supported cards
#CONFIG_HISAX_16_3=yCONFIG_HISAX_TELESPCI=yCONFIG_HISAX_S0BOX=yCONFIG_HISAX_FRITZPCI=yCONFIG_HISAX_AVM_A1_PCMCIA=yCONFIG_HISAX_ELSA=yCONFIG_HISAX_DIEHLDIVA=yCONFIG_HISAX_SEDLBAUER=yCONFIG_HISAX_NETJET=yCONFIG_HISAX_NETJET_U=yCONFIG_HISAX_NICCY=yCONFIG_HISAX_BKM_A4T=yCONFIG_HISAX_SCT_QUADRO=yCONFIG_HISAX_GAZEL=yCONFIG_HISAX_HFC_PCI=yCONFIG_HISAX_W6692=yCONFIG_HISAX_HFC_SX=yCONFIG_HISAX_ENTERNOW_PCI=yCONFIG_HISAX_DEBUG=y
#
# HiSax PCMCIA card service modules
#
#
# HiSax sub driver modules
#CONFIG_HISAX_ST5481=mCONFIG_HISAX_HFCUSB=m
# CONFIG_HISAX_HFC4S8S is not setCONFIG_HISAX_FRITZ_PCIPNP=mCONFIG_HISAX_HDLC=y
#
# Active cards
#
#
# Siemens Gigaset
#
# CONFIG_ISDN_DRV_GIGASET is not set
#
# CAPI subsystem
#CONFIG_ISDN_CAPI=mCONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=yCONFIG_CAPI_TRACE=yCONFIG_ISDN_CAPI_MIDDLEWARE=yCONFIG_ISDN_CAPI_CAPI20=mCONFIG_ISDN_CAPI_CAPIFS_BOOL=yCONFIG_ISDN_CAPI_CAPIFS=mCONFIG_ISDN_CAPI_CAPIDRV=m
#
# CAPI hardware drivers
#
#
# Active AVM cards
#CONFIG_CAPI_AVM=yCONFIG_ISDN_DRV_AVMB1_B1PCI=mCONFIG_ISDN_DRV_AVMB1_B1PCIV4=yCONFIG_ISDN_DRV_AVMB1_B1PCMCIA=mCONFIG_ISDN_DRV_AVMB1_T1PCI=mCONFIG_ISDN_DRV_AVMB1_C4=m
#
# Active Eicon DIVA Server cards
#
# CONFIG_CAPI_EICON is not set
#
# Telephony Support
#CONFIG_PHONE=mCONFIG_PHONE_IXJ=m
#
# Input device support
#CONFIG_INPUT=yCONFIG_INPUT_FF_MEMLESS=m
#
# Userland interfaces
#CONFIG_INPUT_MOUSEDEV=yCONFIG_INPUT_MOUSEDEV_PSAUX=yCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768CONFIG_INPUT_JOYDEV=mCONFIG_INPUT_TSDEV=mCONFIG_INPUT_TSDEV_SCREEN_X=240CONFIG_INPUT_TSDEV_SCREEN_Y=320CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=yCONFIG_KEYBOARD_ATKBD=yCONFIG_KEYBOARD_SUNKBD=m
# CONFIG_KEYBOARD_LKKBD is not setCONFIG_KEYBOARD_XTKBD=mCONFIG_KEYBOARD_NEWTON=m
# CONFIG_KEYBOARD_STOWAWAY is not setCONFIG_INPUT_MOUSE=yCONFIG_MOUSE_PS2=yCONFIG_MOUSE_PS2_ALPS=yCONFIG_MOUSE_PS2_LOGIPS2PP=yCONFIG_MOUSE_PS2_SYNAPTICS=yCONFIG_MOUSE_PS2_LIFEBOOK=yCONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not setCONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_VSXXXAA is not setCONFIG_INPUT_JOYSTICK=yCONFIG_JOYSTICK_ANALOG=mCONFIG_JOYSTICK_A3D=mCONFIG_JOYSTICK_ADI=mCONFIG_JOYSTICK_COBRA=mCONFIG_JOYSTICK_GF2K=mCONFIG_JOYSTICK_GRIP=mCONFIG_JOYSTICK_GRIP_MP=mCONFIG_JOYSTICK_GUILLEMOT=mCONFIG_JOYSTICK_INTERACT=mCONFIG_JOYSTICK_SIDEWINDER=mCONFIG_JOYSTICK_TMDC=mCONFIG_JOYSTICK_IFORCE=mCONFIG_JOYSTICK_IFORCE_USB=yCONFIG_JOYSTICK_IFORCE_232=yCONFIG_JOYSTICK_WARRIOR=mCONFIG_JOYSTICK_MAGELLAN=mCONFIG_JOYSTICK_SPACEORB=mCONFIG_JOYSTICK_SPACEBALL=mCONFIG_JOYSTICK_STINGER=m
# CONFIG_JOYSTICK_TWIDJOY is not setCONFIG_JOYSTICK_DB9=mCONFIG_JOYSTICK_GAMECON=mCONFIG_JOYSTICK_TURBOGRAFX=m
# CONFIG_JOYSTICK_JOYDUMP is not setCONFIG_INPUT_TOUCHSCREEN=yCONFIG_TOUCHSCREEN_GUNZE=m
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_UCB1400 is not setCONFIG_INPUT_MISC=yCONFIG_INPUT_PCSPKR=y
# CONFIG_INPUT_ATLAS_BTNS is not setCONFIG_INPUT_UINPUT=m
#
# Hardware I/O ports
#CONFIG_SERIO=yCONFIG_SERIO_I8042=yCONFIG_SERIO_SERPORT=mCONFIG_SERIO_CT82C710=mCONFIG_SERIO_PARKBD=mCONFIG_SERIO_PCIPS2=mCONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not setCONFIG_GAMEPORT=mCONFIG_GAMEPORT_NS558=mCONFIG_GAMEPORT_L4=mCONFIG_GAMEPORT_EMU10K1=mCONFIG_GAMEPORT_FM801=m
#
# Character devices
#CONFIG_VT=yCONFIG_VT_CONSOLE=yCONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not setCONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not setCONFIG_ROCKETPORT=m
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_MOXA_SMARTIO_NEW is not set
# CONFIG_ISI is not setCONFIG_SYNCLINK=mCONFIG_SYNCLINKMP=m
# CONFIG_SYNCLINK_GT is not setCONFIG_N_HDLC=m
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
# CONFIG_RIO is not setCONFIG_STALDRV=y
# CONFIG_NOZOMI is not set
#
# Serial drivers
#CONFIG_SERIAL_8250=yCONFIG_SERIAL_8250_CONSOLE=yCONFIG_SERIAL_8250_PCI=yCONFIG_SERIAL_8250_PNP=yCONFIG_SERIAL_8250_NR_UARTS=4CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#CONFIG_SERIAL_CORE=yCONFIG_SERIAL_CORE_CONSOLE=yCONFIG_SERIAL_JSM=mCONFIG_UNIX98_PTYS=yCONFIG_LEGACY_PTYS=yCONFIG_LEGACY_PTY_COUNT=256CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not setCONFIG_PPDEV=mCONFIG_TIPAR=m
#
# IPMI
#CONFIG_IPMI_HANDLER=mCONFIG_IPMI_PANIC_EVENT=y
# CONFIG_IPMI_PANIC_STRING is not setCONFIG_IPMI_DEVICE_INTERFACE=m
# CONFIG_IPMI_SI is not setCONFIG_IPMI_WATCHDOG=m
# CONFIG_IPMI_POWEROFF is not set
#
# Watchdog Cards
#CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#CONFIG_SOFT_WATCHDOG=mCONFIG_ACQUIRE_WDT=mCONFIG_ADVANTECH_WDT=mCONFIG_ALIM1535_WDT=mCONFIG_ALIM7101_WDT=mCONFIG_SC520_WDT=mCONFIG_EUROTECH_WDT=mCONFIG_IB700_WDT=m
# CONFIG_IBMASR is not setCONFIG_WAFER_WDT=m
# CONFIG_I6300ESB_WDT is not setCONFIG_I8XX_TCO=m
# CONFIG_ITCO_WDT is not setCONFIG_SC1200_WDT=m
# CONFIG_PC87413_WDT is not setCONFIG_60XX_WDT=m
# CONFIG_SBC8360_WDT is not setCONFIG_CPU5_WDT=m
# CONFIG_SMSC37B787_WDT is not setCONFIG_W83627HF_WDT=m
# CONFIG_W83697HF_WDT is not setCONFIG_W83877F_WDT=m
# CONFIG_W83977F_WDT is not setCONFIG_MACHZ_WDT=m
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
#
# PCI-based Watchdog Cards
#CONFIG_PCIPCWATCHDOG=mCONFIG_WDTPCI=mCONFIG_WDT_501_PCI=y
#
# USB-based Watchdog Cards
#CONFIG_USBPCWATCHDOG=mCONFIG_HW_RANDOM=yCONFIG_HW_RANDOM_INTEL=yCONFIG_HW_RANDOM_AMD=yCONFIG_HW_RANDOM_GEODE=yCONFIG_NVRAM=yCONFIG_RTC=yCONFIG_DTLK=mCONFIG_R3964=mCONFIG_APPLICOM=mCONFIG_AGP=yCONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not setCONFIG_RAW_DRIVER=mCONFIG_MAX_RAW_DEVS=4096
# CONFIG_HPET is not setCONFIG_HANGCHECK_TIMER=m
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
#CONFIG_I2C=mCONFIG_I2C_BOARDINFO=yCONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#CONFIG_I2C_ALGOBIT=mCONFIG_I2C_ALGOPCF=m
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
#CONFIG_I2C_ALI1535=m
# CONFIG_I2C_ALI1563 is not setCONFIG_I2C_ALI15X3=mCONFIG_I2C_AMD756=m
# CONFIG_I2C_AMD756_S4882 is not setCONFIG_I2C_AMD8111=mCONFIG_I2C_I801=mCONFIG_I2C_I810=m
# CONFIG_I2C_PIIX4 is not setCONFIG_I2C_ISA=mCONFIG_I2C_NFORCE2=m
# CONFIG_I2C_OCORES is not setCONFIG_I2C_PARPORT=mCONFIG_I2C_PARPORT_LIGHT=m
# CONFIG_I2C_PASEMI is not setCONFIG_I2C_PROSAVAGE=mCONFIG_I2C_SAVAGE4=mCONFIG_I2C_SIS5595=mCONFIG_I2C_SIS630=mCONFIG_I2C_SIS96X=m
# CONFIG_I2C_STUB is not setCONFIG_I2C_VIA=mCONFIG_I2C_VIAPRO=mCONFIG_I2C_VOODOO3=m
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not setCONFIG_SENSORS_EEPROM=m
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#CONFIG_HWMON=yCONFIG_HWMON_VID=m
# CONFIG_SENSORS_ABITUGURU is not setCONFIG_SENSORS_ADM1021=m
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_K8TEMP is not setCONFIG_SENSORS_ASB100=m
# CONFIG_SENSORS_ATXP1 is not setCONFIG_SENSORS_DS1621=m
# CONFIG_SENSORS_F71805F is not setCONFIG_SENSORS_FSCHER=m
# CONFIG_SENSORS_FSCPOS is not setCONFIG_SENSORS_GL518SM=m
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not setCONFIG_SENSORS_IT87=m
# CONFIG_SENSORS_LM63 is not setCONFIG_SENSORS_LM75=m
# CONFIG_SENSORS_LM77 is not setCONFIG_SENSORS_LM78=mCONFIG_SENSORS_LM80=mCONFIG_SENSORS_LM83=mCONFIG_SENSORS_LM85=m
# CONFIG_SENSORS_LM87 is not setCONFIG_SENSORS_LM90=m
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not setCONFIG_SENSORS_VIA686A=m
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not setCONFIG_SENSORS_W83781D=m
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not setCONFIG_SENSORS_W83L785TS=mCONFIG_SENSORS_W83627HF=m
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Sonics Silicon Backplane
#CONFIG_SSB=mCONFIG_SSB_PCIHOST=y
# CONFIG_SSB_SILENT is not set
# CONFIG_SSB_DEBUG is not setCONFIG_SSB_DRIVER_PCICORE=y
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#CONFIG_VIDEO_DEV=mCONFIG_VIDEO_V4L1=yCONFIG_VIDEO_V4L1_COMPAT=yCONFIG_VIDEO_V4L2=y
#
# Video Capture Adapters
#
#
# Video Capture Adapters
#
# CONFIG_VIDEO_ADV_DEBUG is not setCONFIG_VIDEO_HELPER_CHIPS_AUTO=yCONFIG_VIDEO_TVAUDIO=mCONFIG_VIDEO_TDA7432=mCONFIG_VIDEO_TDA9840=mCONFIG_VIDEO_TDA9875=mCONFIG_VIDEO_TEA6415C=mCONFIG_VIDEO_TEA6420=mCONFIG_VIDEO_MSP3400=mCONFIG_VIDEO_BT819=mCONFIG_VIDEO_BT856=mCONFIG_VIDEO_SAA7110=mCONFIG_VIDEO_SAA7111=mCONFIG_VIDEO_SAA7114=mCONFIG_VIDEO_VPX3220=mCONFIG_VIDEO_SAA7185=mCONFIG_VIDEO_ADV7170=mCONFIG_VIDEO_ADV7175=m
# CONFIG_VIDEO_VIVI is not setCONFIG_VIDEO_BT848=m
# CONFIG_VIDEO_BT848_DVB is not set
# CONFIG_VIDEO_SAA6588 is not setCONFIG_VIDEO_BWQCAM=mCONFIG_VIDEO_CQCAM=mCONFIG_VIDEO_W9966=mCONFIG_VIDEO_CPIA=mCONFIG_VIDEO_CPIA_PP=mCONFIG_VIDEO_CPIA_USB=m
# CONFIG_VIDEO_CPIA2 is not setCONFIG_VIDEO_SAA5246A=mCONFIG_VIDEO_SAA5249=mCONFIG_TUNER_3036=mCONFIG_VIDEO_STRADIS=mCONFIG_VIDEO_ZORAN_ZR36060=mCONFIG_VIDEO_ZORAN=mCONFIG_VIDEO_ZORAN_BUZ=mCONFIG_VIDEO_ZORAN_DC10=mCONFIG_VIDEO_ZORAN_DC30=mCONFIG_VIDEO_ZORAN_LML33=mCONFIG_VIDEO_ZORAN_LML33R10=m
# CONFIG_VIDEO_ZORAN_AVS6EYES is not setCONFIG_VIDEO_SAA7134=m
# CONFIG_VIDEO_SAA7134_ALSA is not set
# CONFIG_VIDEO_SAA7134_OSS is not set
# CONFIG_VIDEO_SAA7134_DVB is not setCONFIG_VIDEO_MXB=mCONFIG_VIDEO_DPC=mCONFIG_VIDEO_HEXIUM_ORION=mCONFIG_VIDEO_HEXIUM_GEMINI=mCONFIG_VIDEO_CX88=m
# CONFIG_VIDEO_CX88_ALSA is not set
# CONFIG_VIDEO_CX88_BLACKBIRD is not set
# CONFIG_VIDEO_CX88_DVB is not set
# CONFIG_VIDEO_IVTV is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
#
# V4L USB devices
#
# CONFIG_VIDEO_PVRUSB2 is not set
# CONFIG_VIDEO_EM28XX is not set
# CONFIG_VIDEO_USBVISION is not setCONFIG_VIDEO_USBVIDEO=mCONFIG_USB_VICAM=mCONFIG_USB_IBMCAM=mCONFIG_USB_KONICAWC=m
# CONFIG_USB_QUICKCAM_MESSENGER is not set
# CONFIG_USB_ET61X251 is not setCONFIG_VIDEO_OVCAMCHIP=mCONFIG_USB_W9968CF=mCONFIG_USB_OV511=mCONFIG_USB_SE401=m
# CONFIG_USB_SN9C102 is not setCONFIG_USB_STV680=m
# CONFIG_USB_ZC0301 is not set
# CONFIG_USB_PWC is not set
# CONFIG_USB_ZR364XX is not set
#
# Radio Adapters
#CONFIG_RADIO_GEMTEK_PCI=mCONFIG_RADIO_MAXIRADIO=mCONFIG_RADIO_MAESTRO=mCONFIG_USB_DSBR=m
#
# Digital Video Broadcasting Devices
#CONFIG_DVB=yCONFIG_DVB_CORE=m
# CONFIG_DVB_CORE_ATTACH is not set
#
# Supported SAA7146 based PCI Adapters
#CONFIG_DVB_AV7110=m
# CONFIG_DVB_AV7110_FIRMWARE is not set
# CONFIG_DVB_AV7110_OSD is not setCONFIG_DVB_BUDGET=mCONFIG_DVB_BUDGET_CI=mCONFIG_DVB_BUDGET_AV=mCONFIG_DVB_BUDGET_PATCH=m
#
# Supported USB Adapters
#
# CONFIG_DVB_USB is not setCONFIG_DVB_TTUSB_BUDGET=mCONFIG_DVB_TTUSB_DEC=m
# CONFIG_DVB_CINERGYT2 is not set
#
# Supported FlexCopII (B2C2) Adapters
#
# CONFIG_DVB_B2C2_FLEXCOP is not set
#
# Supported BT878 Adapters
#CONFIG_DVB_BT8XX=m
#
# Supported Pluto2 Adapters
#
# CONFIG_DVB_PLUTO2 is not set
#
# Supported DVB Frontends
#
#
# Customise DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set
#
# DVB-S (satellite) frontends
#CONFIG_DVB_STV0299=mCONFIG_DVB_CX24110=m
# CONFIG_DVB_CX24123 is not setCONFIG_DVB_TDA8083=mCONFIG_DVB_MT312=mCONFIG_DVB_VES1X93=mCONFIG_DVB_S5H1420=mCONFIG_DVB_TDA10086=m
#
# DVB-T (terrestrial) frontends
#CONFIG_DVB_SP8870=mCONFIG_DVB_SP887X=mCONFIG_DVB_CX22700=m
# CONFIG_DVB_CX22702 is not setCONFIG_DVB_L64781=mCONFIG_DVB_TDA1004X=mCONFIG_DVB_NXT6000=mCONFIG_DVB_MT352=mCONFIG_DVB_ZL10353=m
# CONFIG_DVB_DIB3000MB is not set
# CONFIG_DVB_DIB3000MC is not set
# CONFIG_DVB_DIB7000M is not set
# CONFIG_DVB_DIB7000P is not set
#
# DVB-C (cable) frontends
#CONFIG_DVB_VES1820=mCONFIG_DVB_TDA10021=mCONFIG_DVB_STV0297=m
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends #
# CONFIG_DVB_NXT200X is not setCONFIG_DVB_OR51211=m
# CONFIG_DVB_OR51132 is not set
# CONFIG_DVB_BCM3510 is not set CONFIG_DVB_LGDT330X=m
#
# Tuners/PLL support
#CONFIG_DVB_PLL=mCONFIG_DVB_TDA826X=m
# CONFIG_DVB_TDA827X is not set
# CONFIG_DVB_TUNER_QT1010 is not set
# CONFIG_DVB_TUNER_MT2060 is not set
#
# Miscellaneous devices
#CONFIG_DVB_LNBP21=m
# CONFIG_DVB_ISL6421 is not setCONFIG_DVB_TUA6100=mCONFIG_VIDEO_SAA7146=mCONFIG_VIDEO_SAA7146_VV=mCONFIG_VIDEO_TUNER=mCONFIG_VIDEO_BUF=mCONFIG_VIDEO_BTCX=mCONFIG_VIDEO_IR=mCONFIG_VIDEO_TVEEPROM=mCONFIG_USB_DABUSB=m
#
# Graphics support
#CONFIG_BACKLIGHT_LCD_SUPPORT=yCONFIG_BACKLIGHT_CLASS_DEVICE=yCONFIG_LCD_CLASS_DEVICE=m
# CONFIG_BACKLIGHT_PROGEAR is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not setCONFIG_FB=yCONFIG_FIRMWARE_EDID=yCONFIG_FB_DDC=mCONFIG_FB_CFB_FILLRECT=yCONFIG_FB_CFB_COPYAREA=yCONFIG_FB_CFB_IMAGEBLIT=yCONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not setCONFIG_FB_BACKLIGHT=yCONFIG_FB_MODE_HELPERS=yCONFIG_FB_TILEBLITTING=y
#
# Frambuffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not setCONFIG_FB_CYBER2000=m
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not setCONFIG_FB_VGA16=mCONFIG_FB_VESA=y
# CONFIG_FB_HECUBA is not setCONFIG_FB_HGA=m
# CONFIG_FB_HGA_ACCEL is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not setCONFIG_FB_RIVA=m
# CONFIG_FB_RIVA_I2C is not set
# CONFIG_FB_RIVA_DEBUG is not setCONFIG_FB_RIVA_BACKLIGHT=y
# CONFIG_FB_INTEL is not setCONFIG_FB_MATROX=mCONFIG_FB_MATROX_MILLENIUM=yCONFIG_FB_MATROX_MYSTIQUE=y
# CONFIG_FB_MATROX_G is not setCONFIG_FB_MATROX_I2C=mCONFIG_FB_MATROX_MULTIHEAD=yCONFIG_FB_RADEON=mCONFIG_FB_RADEON_I2C=yCONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not setCONFIG_FB_ATY128=mCONFIG_FB_ATY128_BACKLIGHT=yCONFIG_FB_ATY=mCONFIG_FB_ATY_CT=y
# CONFIG_FB_ATY_GENERIC_LCD is not setCONFIG_FB_ATY_GX=yCONFIG_FB_ATY_BACKLIGHT=y
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not setCONFIG_FB_SIS=mCONFIG_FB_SIS_300=yCONFIG_FB_SIS_315=yCONFIG_FB_NEOMAGIC=mCONFIG_FB_KYRO=mCONFIG_FB_3DFX=m
# CONFIG_FB_3DFX_ACCEL is not setCONFIG_FB_VOODOO1=mCONFIG_FB_TRIDENT=m
# CONFIG_FB_TRIDENT_ACCEL is not set
# CONFIG_FB_GEODE is not setCONFIG_FB_VIRTUAL=m
#
# Console display driver support
#CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not setCONFIG_VIDEO_SELECT=yCONFIG_DUMMY_CONSOLE=yCONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#
# CONFIG_LOGO is not set
#
# Sound
#CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#CONFIG_SND=mCONFIG_SND_TIMER=mCONFIG_SND_PCM=mCONFIG_SND_HWDEP=mCONFIG_SND_RAWMIDI=mCONFIG_SND_SEQUENCER=mCONFIG_SND_SEQ_DUMMY=mCONFIG_SND_OSSEMUL=yCONFIG_SND_MIXER_OSS=mCONFIG_SND_PCM_OSS=mCONFIG_SND_PCM_OSS_PLUGINS=yCONFIG_SND_SEQUENCER_OSS=yCONFIG_SND_RTCTIMER=mCONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not setCONFIG_SND_SUPPORT_OLD_API=yCONFIG_SND_VERBOSE_PROCFS=yCONFIG_SND_VERBOSE_PRINTK=yCONFIG_SND_DEBUG=y
# CONFIG_SND_DEBUG_DETECT is not set
# CONFIG_SND_PCM_XRUN_DEBUG is not set
#
# Generic devices
#CONFIG_SND_MPU401_UART=mCONFIG_SND_OPL3_LIB=mCONFIG_SND_VX_LIB=mCONFIG_SND_AC97_CODEC=mCONFIG_SND_DUMMY=mCONFIG_SND_VIRMIDI=mCONFIG_SND_MTPAV=m
# CONFIG_SND_MTS64 is not setCONFIG_SND_SERIAL_U16550=mCONFIG_SND_MPU401=m
# CONFIG_SND_PORTMAN2X4 is not set
#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not setCONFIG_SND_ALS4000=mCONFIG_SND_ALI5451=mCONFIG_SND_ATIIXP=m
# CONFIG_SND_ATIIXP_MODEM is not setCONFIG_SND_AU8810=mCONFIG_SND_AU8820=mCONFIG_SND_AU8830=mCONFIG_SND_AZT3328=mCONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
# CONFIG_SND_CA0106 is not setCONFIG_SND_CMIPCI=mCONFIG_SND_CS4281=mCONFIG_SND_CS46XX=mCONFIG_SND_CS46XX_NEW_DSP=y
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not setCONFIG_SND_EMU10K1=m
# CONFIG_SND_EMU10K1X is not setCONFIG_SND_ENS1370=mCONFIG_SND_ENS1371=mCONFIG_SND_ES1938=mCONFIG_SND_ES1968=mCONFIG_SND_FM801=m
# CONFIG_SND_FM801_TEA575X_BOOL is not setCONFIG_SND_HDA_INTEL=mCONFIG_SND_HDSP=m
# CONFIG_SND_HDSPM is not setCONFIG_SND_ICE1712=mCONFIG_SND_ICE1724=mCONFIG_SND_INTEL8X0=mCONFIG_SND_INTEL8X0M=mCONFIG_SND_KORG1212=mCONFIG_SND_KORG1212_FIRMWARE_IN_KERNEL=yCONFIG_SND_MAESTRO3=mCONFIG_SND_MAESTRO3_FIRMWARE_IN_KERNEL=yCONFIG_SND_MIXART=mCONFIG_SND_NM256=m
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not setCONFIG_SND_RME32=mCONFIG_SND_RME96=mCONFIG_SND_RME9652=mCONFIG_SND_SONICVIBES=mCONFIG_SND_TRIDENT=mCONFIG_SND_VIA82XX=m
# CONFIG_SND_VIA82XX_MODEM is not setCONFIG_SND_VX222=mCONFIG_SND_YMFPCI=mCONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL=y
# CONFIG_SND_AC97_POWER_SAVE is not set
#
# USB devices
#CONFIG_SND_USB_AUDIO=m
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
#
# SoC audio support
#
# CONFIG_SND_SOC is not set
#
# Open Sound System
#CONFIG_SOUND_PRIME=m
# CONFIG_OSS_OBSOLETE is not setCONFIG_SOUND_TRIDENT=m
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not setCONFIG_SOUND_OSS=mCONFIG_SOUND_TRACEINIT=yCONFIG_SOUND_DMAP=yCONFIG_SOUND_SSCAPE=mCONFIG_SOUND_VMIDI=mCONFIG_SOUND_TRIX=mCONFIG_SOUND_MSS=mCONFIG_SOUND_MPU401=mCONFIG_SOUND_PAS=mCONFIG_SOUND_PSS=mCONFIG_PSS_MIXER=y
# CONFIG_PSS_HAVE_BOOT is not setCONFIG_SOUND_SB=mCONFIG_SOUND_YM3812=mCONFIG_SOUND_UART6850=mCONFIG_SOUND_AEDSP16=mCONFIG_SC6600=yCONFIG_SC6600_JOY=yCONFIG_SC6600_CDROM=4CONFIG_SC6600_CDROMBASE=0x0
# CONFIG_AEDSP16_MSS is not set
# CONFIG_AEDSP16_SBPRO is not setCONFIG_SOUND_KAHLUA=mCONFIG_AC97_BUS=m
#
# HID Devices
#CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
# USB Input Devices
#CONFIG_USB_HID=m
# CONFIG_USB_HIDINPUT_POWERBOOK is not setCONFIG_HID_FF=yCONFIG_HID_PID=yCONFIG_LOGITECH_FF=y
# CONFIG_PANTHERLORD_FF is not setCONFIG_THRUSTMASTER_FF=y
# CONFIG_ZEROPLUS_FF is not setCONFIG_USB_HIDDEV=y
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
#
# USB support
#CONFIG_USB_ARCH_HAS_HCD=yCONFIG_USB_ARCH_HAS_OHCI=yCONFIG_USB_ARCH_HAS_EHCI=yCONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#CONFIG_USB_EHCI_HCD=mCONFIG_USB_EHCI_SPLIT_ISO=yCONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
# CONFIG_USB_ISP116X_HCD is not setCONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_HCD_SSB is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not setCONFIG_USB_OHCI_LITTLE_ENDIAN=yCONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#CONFIG_USB_ACM=mCONFIG_USB_PRINTER=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' #
#
# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y CONFIG_USB_STORAGE_ISD200=y CONFIG_USB_STORAGE_DPCM=y # CONFIG_USB_STORAGE_USBAT is not set CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#CONFIG_USB_AIPTEK=mCONFIG_USB_WACOM=m
# CONFIG_USB_ACECAD is not setCONFIG_USB_KBTAB=mCONFIG_USB_POWERMATE=m
# CONFIG_USB_TOUCHSCREEN is not set
# CONFIG_USB_YEALINK is not setCONFIG_USB_XPAD=mCONFIG_USB_ATI_REMOTE=m
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
# CONFIG_USB_GTCO is not set
#
# USB Imaging devices
#CONFIG_USB_MDC800=mCONFIG_USB_MICROTEK=m
#
# USB Network Adapters
#CONFIG_USB_CATC=mCONFIG_USB_KAWETH=mCONFIG_USB_PEGASUS=mCONFIG_USB_RTL8150=mCONFIG_USB_USBNET_MII=mCONFIG_USB_USBNET=mCONFIG_USB_NET_AX8817X=mCONFIG_USB_NET_CDCETHER=m
# CONFIG_USB_NET_DM9601 is not set
# CONFIG_USB_NET_GL620A is not setCONFIG_USB_NET_NET1080=m
# CONFIG_USB_NET_PLUSB is not set
# CONFIG_USB_NET_MCS7830 is not set
# CONFIG_USB_NET_RNDIS_HOST is not set
# CONFIG_USB_NET_CDC_SUBSET is not setCONFIG_USB_NET_ZAURUS=mCONFIG_USB_MON=y
#
# USB port drivers
#CONFIG_USB_USS720=m
#
# USB Serial Converter support
#CONFIG_USB_SERIAL=mCONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_AIRPRIME is not set
# CONFIG_USB_SERIAL_ARK3116 is not setCONFIG_USB_SERIAL_BELKIN=m
# CONFIG_USB_SERIAL_WHITEHEAT is not setCONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
# CONFIG_USB_SERIAL_CP2101 is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not setCONFIG_USB_SERIAL_EMPEG=mCONFIG_USB_SERIAL_FTDI_SIO=m
# CONFIG_USB_SERIAL_FUNSOFT is not setCONFIG_USB_SERIAL_VISOR=mCONFIG_USB_SERIAL_IPAQ=mCONFIG_USB_SERIAL_IR=mCONFIG_USB_SERIAL_EDGEPORT=mCONFIG_USB_SERIAL_EDGEPORT_TI=m
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not setCONFIG_USB_SERIAL_KEYSPAN_PDA=mCONFIG_USB_SERIAL_KEYSPAN=mCONFIG_USB_SERIAL_KEYSPAN_MPR=yCONFIG_USB_SERIAL_KEYSPAN_USA28=yCONFIG_USB_SERIAL_KEYSPAN_USA28X=yCONFIG_USB_SERIAL_KEYSPAN_USA28XA=yCONFIG_USB_SERIAL_KEYSPAN_USA28XB=yCONFIG_USB_SERIAL_KEYSPAN_USA19=yCONFIG_USB_SERIAL_KEYSPAN_USA18X=yCONFIG_USB_SERIAL_KEYSPAN_USA19W=yCONFIG_USB_SERIAL_KEYSPAN_USA19QW=yCONFIG_USB_SERIAL_KEYSPAN_USA19QI=yCONFIG_USB_SERIAL_KEYSPAN_USA49W=yCONFIG_USB_SERIAL_KEYSPAN_USA49WLC=yCONFIG_USB_SERIAL_KLSI=mCONFIG_USB_SERIAL_KOBIL_SCT=mCONFIG_USB_SERIAL_MCT_U232=m
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_NAVMAN is not setCONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_HP4X is not setCONFIG_USB_SERIAL_SAFE=mCONFIG_USB_SERIAL_SAFE_PADDED=y
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_TI is not setCONFIG_USB_SERIAL_CYBERJACK=mCONFIG_USB_SERIAL_XIRCOM=m
# CONFIG_USB_SERIAL_OPTION is not setCONFIG_USB_SERIAL_OMNINET=m
# CONFIG_USB_SERIAL_DEBUG is not setCONFIG_USB_EZUSB=y
#
# USB Miscellaneous drivers
#CONFIG_USB_EMI62=mCONFIG_USB_EMI26=m
# CONFIG_USB_ADUTUX is not setCONFIG_USB_AUERSWALD=mCONFIG_USB_RIO500=mCONFIG_USB_LEGOTOWER=mCONFIG_USB_LCD=m
# CONFIG_USB_BERRY_CHARGE is not setCONFIG_USB_LED=m
# CONFIG_USB_CYPRESS_CY7C63 is not setCONFIG_USB_CYTHERM=m
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_GOTEMP is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# LED drivers
#
#
# LED Triggers
#
#
# InfiniBand support
#CONFIG_INFINIBAND=m
# CONFIG_INFINIBAND_USER_MAD is not set
# CONFIG_INFINIBAND_USER_ACCESS is not setCONFIG_INFINIBAND_ADDR_TRANS=y
# CONFIG_INFINIBAND_MTHCA is not set
# CONFIG_INFINIBAND_IPATH is not set
# CONFIG_INFINIBAND_AMSO1100 is not setCONFIG_INFINIBAND_IPOIB=m
# CONFIG_INFINIBAND_IPOIB_CM is not setCONFIG_INFINIBAND_IPOIB_DEBUG=y
# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not setCONFIG_INFINIBAND_SRP=m
# CONFIG_INFINIBAND_ISER is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) #
# CONFIG_EDAC is not set
#
# Real Time Clock
#
# CONFIG_RTC_CLASS is not set
#
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set
#
# DMA Clients
#CONFIG_ASYNC_TX_DMA=y
#
# DMA Devices
#
#
# Auxiliary Display support
#
# CONFIG_KS0108 is not set
#
# Virtualization
#
# CONFIG_KVM is not set
#
# Userspace I/O
#
# CONFIG_UIO is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
#
# File systems
#CONFIG_EXT2_FS=yCONFIG_EXT2_FS_XATTR=yCONFIG_EXT2_FS_POSIX_ACL=yCONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not setCONFIG_EXT3_FS=yCONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not setCONFIG_EXT4DEV_FS=mCONFIG_EXT4DEV_FS_XATTR=y
# CONFIG_EXT4DEV_FS_POSIX_ACL is not set
# CONFIG_EXT4DEV_FS_SECURITY is not setCONFIG_JBD=y
# CONFIG_JBD_DEBUG is not setCONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not setCONFIG_FS_MBCACHE=y
# CONFIG_REISER4_FS is not setCONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not setCONFIG_REISERFS_FS_XATTR=yCONFIG_REISERFS_FS_POSIX_ACL=yCONFIG_REISERFS_FS_SECURITY=yCONFIG_JFS_FS=mCONFIG_JFS_POSIX_ACL=y
# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not setCONFIG_JFS_STATISTICS=yCONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not setCONFIG_OCFS2_FS=mCONFIG_OCFS2_DEBUG_MASKLOG=yCONFIG_MINIX_FS=yCONFIG_ROMFS_FS=mCONFIG_ROMFS_ON_BLOCK=yCONFIG_ROMFS_ON_MTD=yCONFIG_INOTIFY=yCONFIG_INOTIFY_USER=yCONFIG_QUOTA=yCONFIG_QFMT_V1=mCONFIG_QFMT_V2=mCONFIG_QUOTACTL=yCONFIG_DNOTIFY=yCONFIG_AUTOFS_FS=m
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#CONFIG_ISO9660_FS=yCONFIG_JOLIET=yCONFIG_ZISOFS=yCONFIG_UDF_FS=mCONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#CONFIG_FAT_FS=mCONFIG_MSDOS_FS=mCONFIG_VFAT_FS=mCONFIG_FAT_DEFAULT_CODEPAGE=437CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#CONFIG_PROC_FS=yCONFIG_PROC_KCORE=yCONFIG_PROC_SYSCTL=yCONFIG_SYSFS=yCONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not setCONFIG_HUGETLBFS=yCONFIG_HUGETLB_PAGE=yCONFIG_RAMFS=yCONFIG_CONFIGFS_FS=y
#
# Layered filesystems
#
# CONFIG_UNION_FS is not set
#
# Miscellaneous filesystems
#CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not setCONFIG_AFFS_FS=mCONFIG_HFS_FS=mCONFIG_HFSPLUS_FS=mCONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not setCONFIG_BFS_FS=mCONFIG_EFS_FS=mCONFIG_JFFS2_FS=mCONFIG_JFFS2_FS_DEBUG=0CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not setCONFIG_JFFS2_ZLIB=yCONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not setCONFIG_CRAMFS=mCONFIG_VXFS_FS=mCONFIG_HPFS_FS=mCONFIG_QNX4FS_FS=mCONFIG_SYSV_FS=mCONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
#
# Network File Systems
#CONFIG_NFS_FS=yCONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not setCONFIG_NFS_V4=yCONFIG_NFS_DIRECTIO=yCONFIG_NFSD=mCONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not setCONFIG_NFSD_TCP=yCONFIG_ROOT_NFS=yCONFIG_LOCKD=yCONFIG_LOCKD_V4=yCONFIG_EXPORTFS=mCONFIG_NFS_COMMON=yCONFIG_SUNRPC=yCONFIG_SUNRPC_GSS=yCONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not setCONFIG_SMB_FS=mCONFIG_SMB_NLS_DEFAULT=yCONFIG_SMB_NLS_REMOTE="cp850"CONFIG_CIFS=mCONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not set
# CONFIG_CIFS_WEAK_PW_HASH is not setCONFIG_CIFS_XATTR=yCONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not setCONFIG_NCP_FS=mCONFIG_NCPFS_PACKET_SIGNING=yCONFIG_NCPFS_IOCTL_LOCKING=yCONFIG_NCPFS_STRONG=yCONFIG_NCPFS_NFS_NS=yCONFIG_NCPFS_OS2_NS=yCONFIG_NCPFS_SMALLDOS=yCONFIG_NCPFS_NLS=yCONFIG_NCPFS_EXTRAS=yCONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not setCONFIG_AFS_FS=mCONFIG_RXRPC=m
# CONFIG_9P_FS is not set
#
# Partition Types
#CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not setCONFIG_OSF_PARTITION=y
# CONFIG_AMIGA_PARTITION is not setCONFIG_ATARI_PARTITION=yCONFIG_MAC_PARTITION=yCONFIG_MSDOS_PARTITION=yCONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not setCONFIG_SOLARIS_X86_PARTITION=yCONFIG_UNIXWARE_DISKLABEL=yCONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not setCONFIG_SGI_PARTITION=yCONFIG_ULTRIX_PARTITION=yCONFIG_SUN_PARTITION=y
# CONFIG_KARMA_PARTITION is not setCONFIG_EFI_PARTITION=y
#
# Native Language Support
#CONFIG_NLS=yCONFIG_NLS_DEFAULT="utf8"CONFIG_NLS_CODEPAGE_437=mCONFIG_NLS_CODEPAGE_737=mCONFIG_NLS_CODEPAGE_775=mCONFIG_NLS_CODEPAGE_850=mCONFIG_NLS_CODEPAGE_852=mCONFIG_NLS_CODEPAGE_855=mCONFIG_NLS_CODEPAGE_857=mCONFIG_NLS_CODEPAGE_860=mCONFIG_NLS_CODEPAGE_861=mCONFIG_NLS_CODEPAGE_862=mCONFIG_NLS_CODEPAGE_863=mCONFIG_NLS_CODEPAGE_864=mCONFIG_NLS_CODEPAGE_865=mCONFIG_NLS_CODEPAGE_866=mCONFIG_NLS_CODEPAGE_869=mCONFIG_NLS_CODEPAGE_936=mCONFIG_NLS_CODEPAGE_950=mCONFIG_NLS_CODEPAGE_932=mCONFIG_NLS_CODEPAGE_949=mCONFIG_NLS_CODEPAGE_874=mCONFIG_NLS_ISO8859_8=mCONFIG_NLS_CODEPAGE_1250=mCONFIG_NLS_CODEPAGE_1251=m
# CONFIG_NLS_ASCII is not setCONFIG_NLS_ISO8859_1=mCONFIG_NLS_ISO8859_2=mCONFIG_NLS_ISO8859_3=mCONFIG_NLS_ISO8859_4=mCONFIG_NLS_ISO8859_5=mCONFIG_NLS_ISO8859_6=mCONFIG_NLS_ISO8859_7=mCONFIG_NLS_ISO8859_9=mCONFIG_NLS_ISO8859_13=mCONFIG_NLS_ISO8859_14=mCONFIG_NLS_ISO8859_15=mCONFIG_NLS_KOI8_R=mCONFIG_NLS_KOI8_U=mCONFIG_NLS_UTF8=m
#
# Distributed Lock Manager
#
# CONFIG_DLM is not set
#
# Instrumentation Support
#CONFIG_PROFILING=yCONFIG_OPROFILE=m
# CONFIG_KPROBES is not setCONFIG_MARKERS=yCONFIG_MARKERS_ENABLE_OPTIMIZATION=y
#
# Kernel hacking
#CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not setCONFIG_ENABLE_MUST_CHECK=yCONFIG_MAGIC_SYSRQ=yCONFIG_UNUSED_SYMBOLS=yCONFIG_PAGE_OWNER=y
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not setCONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not setCONFIG_LOG_BUF_SHIFT=18CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not setCONFIG_DEBUG_BUGVERBOSE=yCONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not setCONFIG_FRAME_POINTER=y
# CONFIG_PROFILE_LIKELY is not setCONFIG_FORCED_INLINING=y
# CONFIG_DEBUG_SYNCHRO_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_INTEGRITY is not setCONFIG_SECURITY=yCONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not setCONFIG_SECURITY_CAPABILITIES=m
# CONFIG_SECURITY_FILE_CAPABILITIES is not setCONFIG_SECURITY_ROOTPLUG=m
#
# Cryptographic options
#CONFIG_CRYPTO=yCONFIG_CRYPTO_ALGAPI=yCONFIG_CRYPTO_BLKCIPHER=yCONFIG_CRYPTO_HASH=yCONFIG_CRYPTO_MANAGER=yCONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not setCONFIG_CRYPTO_NULL=mCONFIG_CRYPTO_MD4=mCONFIG_CRYPTO_MD5=yCONFIG_CRYPTO_SHA1=mCONFIG_CRYPTO_SHA256=mCONFIG_CRYPTO_SHA512=m
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_GF128MUL is not setCONFIG_CRYPTO_ECB=mCONFIG_CRYPTO_CBC=yCONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not setCONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not setCONFIG_CRYPTO_BLOWFISH=mCONFIG_CRYPTO_TWOFISH=mCONFIG_CRYPTO_TWOFISH_COMMON=m
# CONFIG_CRYPTO_TWOFISH_X86_64 is not setCONFIG_CRYPTO_SERPENT=mCONFIG_CRYPTO_AES=m
# CONFIG_CRYPTO_AES_X86_64 is not setCONFIG_CRYPTO_CAST5=mCONFIG_CRYPTO_CAST6=m
# CONFIG_CRYPTO_TEA is not setCONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not setCONFIG_CRYPTO_DEFLATE=mCONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not setCONFIG_CRYPTO_TEST=m
#
# Hardware crypto devices
#
#
# Library routines
#CONFIG_BITREVERSE=yCONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not setCONFIG_CRC32=y
# CONFIG_CRC_ITU_T is not set
# CONFIG_LIBCRC32C is not set
# CONFIG_EEPROM_93CX6 is not setCONFIG_ZLIB_INFLATE=yCONFIG_ZLIB_DEFLATE=mCONFIG_PLIST=yCONFIG_HAS_IOMEM=yCONFIG_HAS_IOPORT=yCONFIG_HAS_DMA=y
Quoted 17 lines · On Tue, 27 Mar 2007 09:57:50 -0800 Badari Pulavarty <[email protected]> wrote:
Quoted 16 lines · Andrew Morton
Quoted 13 lines · On Tue, 27 Mar 2007 09:39:33 -0800 Badari Pulavarty <[email protected]> wrote:
Quoted 2 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.21-rc5/2.6.21-rc5-mm1/
LD
init/built-in.o
LD .tmp_vmlinux1
ld: section .vsyscall_1 [0000000000645400 ->000000000064542e] overlaps section .jiffies [0000000000645400 -> 0000000000645407]
ld: .tmp_vmlinux1: section .vsyscall_1 lma0x645400overlaps previous sections
make: *** [.tmp_vmlinux1] Error 1
Quoted 5 lines
Quoted 1 line
bah. Please send .config.
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.21-rc5-mm1
The wheel spins around, slows then settles on.... time-smp-friendly-alignment-of-struct-clocksource.patch!
Presumably because the ____cacheline_aligned made vsyscall_gtod_data_t get too big. Or something.
Quoted 19 lines · Andrew Morton
Quoted 16 lines · On Tue, 27 Mar 2007 09:57:50 -0800 Badari Pulavarty <[email protected]> wrote:
Quoted 15 lines · Andrew Morton
Quoted 4 lines · On Tue, 27 Mar 2007 09:39:33 -0800 Badari Pulavarty <[email protected]> wrote:
Quoted 2 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.21-rc5/2.6.21-rc5-mm1/
Quoted 8 lines
LD
init/built-in.o
LD .tmp_vmlinux1
ld: section .vsyscall_1 [0000000000645400 ->000000000064542e] overlaps section .jiffies [0000000000645400 -> 0000000000645407]
ld: .tmp_vmlinux1: section .vsyscall_1 lma0x645400overlaps previous sections
make: *** [.tmp_vmlinux1] Error 1bah. Please send .config.
Quoted 9 lines
Quoted 3 lines
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.21-rc5-mm1The wheel spins around, slows then settles on.... time-smp-friendly-alignment-of-struct-clocksource.patch!
Presumably because the
____cacheline_alignedmadevsyscall_gtod_data_tget too big. Or something.
Maybe yes... 1024 bytes to code vsyscall0 is tricky.
But then I remember I posted a patch some time ago to remove __jiffie from vsyscall page... no answer yet from Andi.
Quoted 20 lines · Andrew Morton
Quoted 17 lines · On Tue, 27 Mar 2007 09:57:50 -0800 Badari Pulavarty <[email protected]> wrote:
Quoted 16 lines · Andrew Morton
Quoted 13 lines · On Tue, 27 Mar 2007 09:39:33 -0800 Badari Pulavarty <[email protected]> wrote:
Quoted 2 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.21-rc5/2.6.21-rc5-mm1/
LD
init/built-in.o
LD .tmp_vmlinux1
ld: section .vsyscall_1 [0000000000645400 ->000000000064542e] overlaps section .jiffies [0000000000645400 -> 0000000000645407]
ld: .tmp_vmlinux1: section .vsyscall_1 lma0x645400overlaps previous sections
make: *** [.tmp_vmlinux1] Error 1
Quoted 8 lines
Quoted 5 lines
Quoted 1 line
bah. Please send .config.
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.21-rc5-mm1The wheel spins around, slows then settles on.... time-smp-friendly-alignment-of-struct-clocksource.patch!
Yes. Backing out the patch completes the build and machine boots fine.
Thanks,
Badari
Quoted 5 lines · Andrew Morton
The wheel spins around, slows then settles on.... time-smp-friendly-alignment-of-struct-clocksource.patch!
Presumably because the
____cacheline_alignedmadevsyscall_gtod_data_tget too big. Or something.
Very strange, since here I have plenty of available room (256 bytes) :
ffffffffff600000 T vgettimeofdayffffffffff60004e t vsysc2ffffffffff600140 t vread_hpetffffffffff600150 t vread_tscffffffffff600180 D __vsyscall_gtod_dataffffffffff600280 D __vgetcpu_modeffffffffff6002c0 D __jiffies
<lot of space (256 bytes)>ffffffffff600400 T vtimeffffffffff600413 t vsysc1ffffffffff600800 T vgetcpuffffffffff600c00 T venosys_1
It must depends on the compiler, and/or CONFIG_XXX options...
Anyway, I think we can safely move __vgetcpu_mode & __jiffies to the 1024 bytes area dedicated to vgetcpu() implementation. This saves 128 bytes from vsyscall_0 area.
Could we add this patch instead of dropping time-smp-friendly-alignment-of-struct-clocksource.patch ?
Thank you
[PATCH] x86_64 : move __vgetcpu_mode & __jiffies to the vsyscall_2 zone
We apparently hit the 1024 limit of vsyscall_0 zone when some debugging options are set, or if __vsyscall_gtod_data is 64 bytes larger.
In order to save 128 bytes from the vsyscall_0 zone, we move __vgetcpu_mode & __jiffies to vsyscall_2 zone where they really belong, since they are used only from vgetcpu() (which is in this vsyscall_2 area).
After patch is applied, new layout is :
ffffffffff600000 T vgettimeofdayffffffffff60004e t vsysc2ffffffffff600140 t vread_hpetffffffffff600150 t vread_tscffffffffff600180 D __vsyscall_gtod_dataffffffffff600400 T vtimeffffffffff600413 t vsysc1ffffffffff600800 T vgetcpuffffffffff600870 D __vgetcpu_modeffffffffff600880 D __jiffiesffffffffff600c00 T venosys_1
arch/x86_64/kernel/vmlinux.lds.S +6 -4
@@ -94,6 +94,12 @@ SECTIONS { *(.vsyscall_gtod_data) } vsyscall_gtod_data = VVIRT(.vsyscall_gtod_data); + + .vsyscall_1 ADDR(.vsyscall_0) + 1024: AT(VLOAD(.vsyscall_1)) + { *(.vsyscall_1) } + .vsyscall_2 ADDR(.vsyscall_0) + 2048: AT(VLOAD(.vsyscall_2)) + { *(.vsyscall_2) } + .vgetcpu_mode : AT(VLOAD(.vgetcpu_mode)) { *(.vgetcpu_mode) } vgetcpu_mode = VVIRT(.vgetcpu_mode);
@@ -101,10 +107,6 @@ SECTIONS .jiffies : AT(VLOAD(.jiffies)) { *(.jiffies) } jiffies = VVIRT(.jiffies); - .vsyscall_1 ADDR(.vsyscall_0) + 1024: AT(VLOAD(.vsyscall_1)) - { *(.vsyscall_1) } - .vsyscall_2 ADDR(.vsyscall_0) + 2048: AT(VLOAD(.vsyscall_2)) - { *(.vsyscall_2) } .vsyscall_3 ADDR(.vsyscall_0) + 3072: AT(VLOAD(.vsyscall_3)) { *(.vsyscall_3) }
Quoted 23 lines · On Tue, 27 Mar 2007 23:29:34 +0200 Eric Dumazet <[email protected]> wrote:
Quoted 6 lines · Andrew Morton
The wheel spins around, slows then settles on.... time-smp-friendly-alignment-of-struct-clocksource.patch!
Presumably because the
____cacheline_alignedmadevsyscall_gtod_data_tget too big. Or something.Very strange, since here I have plenty of available room (256 bytes) :
ffffffffff600000T vgettimeofdayffffffffff60004et vsysc2ffffffffff600140tvread_hpetffffffffff600150tvread_tscffffffffff600180D__vsyscall_gtod_dataffffffffff600280D__vgetcpu_modeffffffffff6002c0D__jiffies
<lot of space (256 bytes)>ffffffffff600400T vtimeffffffffff600413t vsysc1ffffffffff600800T vgetcpuffffffffff600c00Tvenosys_1
Quoted 1 line
It must depends on the compiler, and/or
CONFIG_XXXoptions...
Badari's config triggered it for me.
Quoted 6 lines
Anyway, I think we can safely move
__vgetcpu_mode&__jiffiesto the 1024 bytes area dedicated tovgetcpu()implementation. This saves 128 bytes fromvsyscall_0area.Could we add this patch instead of dropping time-smp-friendly-alignment-of-struct-clocksource.patch ?
When you tell me it works OK with Badari's config ;)
Quoted 28 lines · Andrew Morton
Quoted 22 lines · On Tue, 27 Mar 2007 23:29:34 +0200 Eric Dumazet <[email protected]> wrote:
Quoted 5 lines · Andrew Morton
The wheel spins around, slows then settles on.... time-smp-friendly-alignment-of-struct-clocksource.patch!
Presumably because the
____cacheline_alignedmadevsyscall_gtod_data_tget too big. Or something.Very strange, since here I have plenty of available room (256 bytes) :
ffffffffff600000T vgettimeofdayffffffffff60004et vsysc2ffffffffff600140tvread_hpetffffffffff600150tvread_tscffffffffff600180D__vsyscall_gtod_dataffffffffff600280D__vgetcpu_modeffffffffff6002c0D__jiffies
<lot of space (256 bytes)>ffffffffff600400T vtimeffffffffff600413t vsysc1ffffffffff600800T vgetcpuffffffffff600c00Tvenosys_1Quoted 2 lines
It must depends on the compiler, and/or
CONFIG_XXXoptions...
Quoted 9 lines
Badari's config triggered it for me.
Quoted 4 lines
Anyway, I think we can safely move
__vgetcpu_mode&__jiffiesto the 1024 bytes area dedicated tovgetcpu()implementation. This saves 128 bytes fromvsyscall_0area.Could we add this patch instead of dropping time-smp-friendly-alignment-of-struct-clocksource.patch ?
When you tell me it works OK with Badari's config ;)
Yes. It did fix my problem.
Thanks,
Badari
Quoted 1 line
PATCH 1/1 fix arch/i386/kernel/marker.c compilation
In reply to Andrew MortonQuoted 7 lines · Andrew Morton
...
Changes since 2.6.21-rc4-mm1:
...
+move-die-notifier-handling-to-common-code.patch
...
Misc
...
This patch fixes the following compile error:
<-- snip -->
...
CC arch/i386/kernel/marker.o/home/bunk/linux/kernel-2.6/linux-2.6.21-rc5-mm2/arch/i386/kernel/marker.c: In function 'mark_notifier':/home/bunk/linux/kernel-2.6/linux-2.6.21-rc5-mm2/arch/i386/kernel/marker.c:44: error: dereferencing pointer to incomplete type /home/bunk/linux/kernel-2.6/linux-2.6.21-rc5-mm2/arch/i386/kernel/marker.c:44: error: dereferencing pointer to incomplete type /home/bunk/linux/kernel-2.6/linux-2.6.21-rc5-mm2/arch/i386/kernel/marker.c:47: error: dereferencing pointer to incomplete type /home/bunk/linux/kernel-2.6/linux-2.6.21-rc5-mm2/arch/i386/kernel/marker.c:48: error: dereferencing pointer to incomplete type /home/bunk/linux/kernel-2.6/linux-2.6.21-rc5-mm2/arch/i386/kernel/marker.c: In function 'marker_optimized_set_enable':/home/bunk/linux/kernel-2.6/linux-2.6.21-rc5-mm2/arch/i386/kernel/marker.c:69: error: implicit declaration of function 'register_die_notifier' /home/bunk/linux/kernel-2.6/linux-2.6.21-rc5-mm2/arch/i386/kernel/marker.c:87: error: implicit declaration of function 'unregister_die_notifier' make[2]: *** [arch/i386/kernel/marker.o] Error 1
<-- snip -->
---
arch/i386/kernel/marker.c renamed from arch/i386/kernel/marker.c.old +1 -0
@@ -16,6 +16,7 @@#include <linux/notifier.h> #include <linux/module.h> #include <linux/marker.h> +#include <linux/kdebug.h> #include <asm/cacheflush.h> #include <asm/kdebug.h>
Re: [-mm patch] fix arch/i386/kernel/marker.c compilation
Hi Adrian,
Since kdebug.h seems to have moved from asm/ to linux/ in Andrew's tree, I guess the #include <asm/kdebug.h> should be removed ? linux/kdebug.h already includes asm/kdebug.h.
Mathieu
Quoted 42 lines · * Adrian Bunk ([email protected]) wrote:
Quoted 7 lines · Andrew Morton
...
Changes since 2.6.21-rc4-mm1:
...
+move-die-notifier-handling-to-common-code.patch
...
Misc
...This patch fixes the following compile error:
<-- snip -->
...
CCarch/i386/kernel/marker.o/home/bunk/linux/kernel-2.6/linux-2.6.21-rc5-mm2/arch/i386/kernel/marker.c: In function 'mark_notifier':/home/bunk/linux/kernel-2.6/linux-2.6.21-rc5-mm2/arch/i386/kernel/marker.c:44: error: dereferencing pointer to incomplete type/home/bunk/linux/kernel-2.6/linux-2.6.21-rc5-mm2/arch/i386/kernel/marker.c:44: error: dereferencing pointer to incomplete type/home/bunk/linux/kernel-2.6/linux-2.6.21-rc5-mm2/arch/i386/kernel/marker.c:47: error: dereferencing pointer to incomplete type/home/bunk/linux/kernel-2.6/linux-2.6.21-rc5-mm2/arch/i386/kernel/marker.c:48: error: dereferencing pointer to incomplete type/home/bunk/linux/kernel-2.6/linux-2.6.21-rc5-mm2/arch/i386/kernel/marker.c: In function 'marker_optimized_set_enable':/home/bunk/linux/kernel-2.6/linux-2.6.21-rc5-mm2/arch/i386/kernel/marker.c:69: error: implicit declaration of function 'register_die_notifier'/home/bunk/linux/kernel-2.6/linux-2.6.21-rc5-mm2/arch/i386/kernel/marker.c:87: error: implicit declaration of function 'unregister_die_notifier' make[2]: *** [arch/i386/kernel/marker.o] Error 1<-- snip -->
Signed-off-by Adrian Bunk <[email protected]>---
arch/i386/kernel/marker.c renamed from arch/i386/kernel/marker.c.old +1
-0@@ -16,6 +16,7 @@#include <linux/notifier.h> #include <linux/module.h> #include <linux/marker.h> +#include <linux/kdebug.h> #include <asm/cacheflush.h> #include <asm/kdebug.h>
Signature · 3 lines
Mathieu Desnoyers Computer Engineering Ph.D. Student, Ecole Polytechnique de Montreal OpenPGP key fingerprint: 8CD5 52C3 8E3C 4140 715F BA06 3F25 A8FE 3BAE 9A68
Re: [-mm patch] fix arch/i386/kernel/marker.c compilation
Quoted 5 lines · Mathieu Desnoyers
Hi Adrian,
Since
kdebug.hseems to have moved from asm/ to linux/ in Andrew's tree, I guess the #include <asm/kdebug.h> should be removed ?linux/kdebug.halready includesasm/kdebug.h.
Yes, exactly.
PATCH 1/1 no longer #include <asm/kdebug.h>
In reply to Mathieu DesnoyersQuoted 5 lines · Mathieu Desnoyers
Hi Adrian,
Since
kdebug.hseems to have moved from asm/ to linux/ in Andrew's tree, I guess the #include <asm/kdebug.h> should be removed ?linux/kdebug.halready includesasm/kdebug.h.
Agreed, additional patch to remove all #include <asm/kdebug.h>'s is below.
Quoted 1 line
Mathieu
cu
Adrian
<-- snip -->
Include the new linux/kdebug.h instead of asm/kdebug.h.
Simply remove the asm/kdebug.h include if both had been included.
---
arch/i386/kernel/marker.c | 1 - arch/s390/kernel/dis.c | 2 +- drivers/char/ipmi/ipmi_watchdog.c | 1 - 3 files changed, 1 insertion(+), 3 deletions(-)
arch/i386/kernel/marker.c renamed from arch/i386/kernel/marker.c.old +0 -1
@@ -18,7 +18,6 @@#include <linux/marker.h> #include <linux/kdebug.h> #include <asm/cacheflush.h> -#include <asm/kdebug.h> #define BREAKPOINT_INSTRUCTION 0xcc#define BREAKPOINT_INS_LEN 1
arch/s390/kernel/dis.c renamed from arch/s390/kernel/dis.c.old +1 -1
@@ -23,6 +23,7 @@#include <linux/kallsyms.h> #include <linux/reboot.h> #include <linux/kprobes.h> +#include <linux/kdebug.h> #include <asm/system.h> #include <asm/uaccess.h>
@@ -33,7 +34,6 @@#include <asm/s390_ext.h> #include <asm/lowcore.h> #include <asm/debug.h> -#include <asm/kdebug.h> #ifndef CONFIG_64BIT #define ONELONG "%08lx: "
drivers/char/ipmi/ipmi_watchdog.c renamed from drivers/char/ipmi/ipmi_watchdog.c.old +0 -1
@@ -61,7 +61,6 @@how it will work. So in the unlikely event that another architecture supports this, we can figure out a good generic mechanism for it at that time. */ -#include <asm/kdebug.h> #define HAVE_DIE_NMI_POST #endif
Quoted 3 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.21-rc5/2.6.21-rc5-mm1/
CC [M] drivers/parport/parport_pc.o
In file included from drivers/parport/parport_pc.c:66:include/asm/parport.h:18: error: conflicting types for ‘parport_pc_probe_port’include/linux/parport_pc.h:234: error: previous declaration of ‘parport_pc_probe_port’ was here drivers/parport/parport_pc.c:2379: error: conflicting types for ‘parport_pc_probe_port’ drivers/parport/parport_pc.c:2152: error: previous definition of ‘parport_pc_probe_port’ was here drivers/parport/parport_pc.c: In function ‘sio_ite_8872_probe’:drivers/parport/parport_pc.c:2509: warning: passing argument 5 of ‘parport_pc_probe_port’ from incompatible pointer type drivers/parport/parport_pc.c: In function ‘sio_via_probe’:drivers/parport/parport_pc.c:2692: warning: passing argument 5 of ‘parport_pc_probe_port’ from incompatible pointer type drivers/parport/parport_pc.c: In function ‘parport_pc_pci_probe’:drivers/parport/parport_pc.c:2990: warning: passing argument 5 of ‘parport_pc_probe_port’ from incompatible pointer type drivers/parport/parport_pc.c: In function ‘parport_pc_pnp_probe’:drivers/parport/parport_pc.c:3098: warning: passing argument 5 of ‘parport_pc_probe_port’ from incompatible pointer type make[2]: *** [drivers/parport/parport_pc.o] Error 1 make[1]: *** [drivers/parport] Error 2
make[1]: *** Waiting for unfinished jobs....
make: *** [drivers] Error 2
make: *** Waiting for unfinished jobs....
Patch that is causing the problem in -mm:
parport-dev-driver-model-support.patch
Here is the fix.
Thanks,
Badari
--- include/asm-powerpc/parport.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
include/asm-powerpc/parport.h +1 -1
@@ -15,7 +15,7 @@extern struct parport *parport_pc_probe_port (unsigned long int base,unsigned long int base_hi,int irq,int dma, -struct pci_dev *dev); +struct device *dev);static int __devinit parport_pc_find_nonpci_ports (int autoirq,int autodma) {
Quoted 53 lines · On Tue, 27 Mar 2007 09:54:07 -0800 Badari Pulavarty <[email protected]> wrote:
Quoted 3 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.21-rc5/2.6.21-rc5-mm1/
CC [M]
drivers/parport/parport_pc.o
In file included fromdrivers/parport/parport_pc.c:66:include/asm/parport.h:18: error: conflicting types for___parport_pc_probe_port___include/linux/parport_pc.h:234: error: previous declaration of___parport_pc_probe_port___was heredrivers/parport/parport_pc.c:2379: error: conflicting types for___parport_pc_probe_port___drivers/parport/parport_pc.c:2152: error: previous definition of___parport_pc_probe_port___was heredrivers/parport/parport_pc.c: In function___sio_ite_8872_probe___:drivers/parport/parport_pc.c:2509: warning: passing argument 5 of___parport_pc_probe_port___from incompatible pointer typedrivers/parport/parport_pc.c: In function___sio_via_probe___:drivers/parport/parport_pc.c:2692: warning: passing argument 5 of___parport_pc_probe_port___from incompatible pointer typedrivers/parport/parport_pc.c: In function___parport_pc_pci_probe___:drivers/parport/parport_pc.c:2990: warning: passing argument 5 of___parport_pc_probe_port___from incompatible pointer typedrivers/parport/parport_pc.c: In function___parport_pc_pnp_probe___:drivers/parport/parport_pc.c:3098: warning: passing argument 5 of___parport_pc_probe_port___from incompatible pointer type make[2]: *** [drivers/parport/parport_pc.o] Error 1 make[1]: *** [drivers/parport] Error 2
make[1]: *** Waiting for unfinished jobs....
make: *** [drivers] Error 2
make: *** Waiting for unfinished jobs....Patch that is causing the problem in -mm:
parport-dev-driver-model-support.patchHere is the fix.
Thanks,
BadariSigned-off-by Badari Pulavarty <[email protected]>--- include/asm-powerpc/parport.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)Index:
linux-2.6.21-rc5/include/asm-powerpc/parport.h
===================================================================
include/asm-powerpc/parport.h line 19
Quoted 6 lines
include/asm-powerpc/parport.h +1
-1@@ -15,7 +15,7 @@extern struct parport *parport_pc_probe_port (unsigned long int base,unsigned long int base_hi,int irq,int dma, -struct pci_dev *dev); +struct device *dev);
I ended up just deleting that declaration - we shouldn't be duplicating it in two header files.
That'll probably break the build, but I'll fix that up when I get near the powerpc machine.
include/asm-powerpc/parport.h line 21
Quoted 2 lines
include/asm-powerpc/parport.h +0
-0static int __devinit parport_pc_find_nonpci_ports (int autoirq,int autodma) {
What's this doing in a header file, I wonder.
Quoted 7 lines
- You may see this:
init/missing_syscalls.c:5:27: error:linux/compile.h: No such file or directoryduring compilation. It's probably a parallel-build bug in Sam's tree. Just type make again.
I ended up redoing the check-for-missing-sys-calls patch and backed out the other patches.
The resulting patch is included below for reference.
Compared to the old patch this does:
-> Unconditionally run the check as part of the prepare for building -> Does not generate any files
-> Keep most of the functionality in a single file contained in scripts/
I missed it in the patch description but it includes the syscalls included by David Miller.
I have pushed out a fresh kbuild.git tree with this patch (and 18 others).
Sam
commit 0dc20d72858da06283db0750ff7edf7294e79d7b
Author: Sam Ravnborg <[email protected]> Date: Tue Mar 27 22:50:29 2007 +0200
kbuild: complain about missing system calls
Most system calls seems to get added to i386 first. This patch automatically generates a warning for any new system call which is implemented on i386 but not the architecture currently being compiled.
On PowerPC at the moment, for example, it results in these warnings:
init/missing_syscalls.h:935:3: warning: #warning syscall sync_file_range not implemented init/missing_syscalls.h:947:3: warning: #warning syscall getcpu not implemented init/missing_syscalls.h:950:3: warning: #warning syscall epoll_pwait not implemented
The file scripts/checksyscalls.sh list a number of legacy system calls that are ignored because they only makes sense on i386 systems.
Other contributors to this patch are Russell King <[email protected]> and Stéphane Jourdois <[email protected]>
Kbuild +11 -0
@@ -2,6 +2,7 @@ # Kbuild for top-level directory of the kernel # This file takes care of the following: # 1) Generate asm-offsets.h +# 2) Check for missing system calls ##### # 1) Generate asm-offsets.h
@@ -46,3 +47,13 @@ $(obj)/$(offsets-file): arch/$(ARCH)/kernel/asm-offsets.s Kbuild $(Q)mkdir -p $(dir $@) $(call cmd,offsets) +##### +# 2) Check for missing system calls +# + +quiet_cmd_syscalls = CALL $< + cmd_syscalls = $(CONFIG_SHELL) $< $(CC) $(c_flags) + +PHONY += missing-syscalls +missing-syscalls: scripts/checksyscalls.sh FORCE + $(call cmd,syscalls)
Makefile +1 -0
@@ -856,6 +856,7 @@ archprepare: prepare1 scripts_basic prepare0: archprepare FORCE $(Q)$(MAKE) $(build)=. + $(Q)$(MAKE) $(build)=. missing-syscalls # All the preparing.. prepare: prepare0
scripts/checksyscalls.sh new file +118 -0
118 lines not on this page · raw message
2.6.21-rc5-mm1: i386/x86_64 register_die_notifier() change
In reply to Andrew MortonQuoted 7 lines · Andrew Morton
...
Changes since 2.6.21-rc4-mm1:
...
+move-die-notifier-handling-to-common-code.patch
...
Misc
...
Is the removal of the vmalloc_sync_all() call in register_die_notifier() on i386 and x86_64 both intentional and correct?
cu
Adrian
Signature · 4 lines
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon SeedRe: [discuss] 2.6.21-rc5-mm1: i386/x86_64 register_die_notifier() change
Quoted 11 lines · Adrian Bunk
Quoted 7 lines · Andrew Morton
...
Changes since 2.6.21-rc4-mm1:
...
+move-die-notifier-handling-to-common-code.patch
...
Misc
...Is the removal of the
vmalloc_sync_all()call inregister_die_notifier()on i386 andx86_64both intentional and correct?
It's wrong. The die notifier is used by NMIs and that needs vmalloc_sync_all()
Thanks for catching that.
-Andi
PATCH 1/1 drivers/mtd/ubi/: make code static
In reply to Andrew MortonQuoted 7 lines · Andrew Morton
...
Changes since 2.6.21-rc4-mm1:
...
git-ubi.patch
...
git trees
...
This patch makes needlessly global code static.
---
drivers/mtd/ubi/eba.c | 4 ++-- drivers/mtd/ubi/vtbl.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-)
drivers/mtd/ubi/eba.c renamed from drivers/mtd/ubi/eba.c.old +2 -2
@@ -489,8 +489,8 @@ out_unlock:* Returns new physical eraseblock number in case of success, and a negative * error code in case of failure. */ -int recover_peb (struct ubi_device *ubi,int pnum,int vol_id,int lnum, -const void *buf,int offset,int len) +static int recover_peb (struct ubi_device *ubi,int pnum,int vol_id,int lnum, +const void *buf,int offset,int len) {int err, idx =vol_id2idx (ubi, vol_id), new_pnum, data_size, tries =0 ;struct ubi_volume *vol = ubi->volumes[idx];
drivers/mtd/ubi/vtbl.c renamed from drivers/mtd/ubi/vtbl.c.old +1 -1
@@ -68,7 +68,7 @@ static void paranoid_vtbl_check(const st#endif /* Empty volume table record */ -struct ubi_vtbl_record empty_vtbl_record; +static struct ubi_vtbl_record empty_vtbl_record;/** * ubi_change_vtbl_record - change volume table record.
Re: [-mm patch] drivers/mtd/ubi/: make code static
Quoted 3 lines · Adrian Bunk
This patch makes needlessly global code static.
Signed-off-by Adrian Bunk <[email protected]>
Thanks, will be fixed.
Signature · 2 lines
Best Regards, Artem Bityutskiy (Артём Битюцкий)
Hello,
I run 2.6.21-rc4-mm1 with no hangs for a week.
Then when 2.6.21-rc5-mm1 showed up so I switched to it. Unfortunately today my laptop hunged twice in a similar way as described here:
http://www.ussg.iu.edu/hypermail/linux/kernel/0703.0/index.html#1165
The difference is that it happened when I closed the lid in my laptop. When reopend it the box was frozen (ACPI?). Again disk I/O was dead so nothing was found in syslog.
I tried to reproduce it and capture something with netconsole. I tortured the box for a few hours but the system did not hang. I pushed the box real hard and what I got was only oom-killer firing etc ;-) Anyway I found something else you might be interested in:
1) This happened when 'echo 3 > /proc/sys/vm/drop_caches' on really busy system.
=======================================================
[ INFO: possible circular locking dependency detected ]
2.6.21-rc5-mm1 #1
-------------------------------------------------------
bash/20633 is trying to acquire lock:
(&journal->j_list_lock){--..}, at: [<c01bb60e>] journal_try_to_free_buffers+0x151/0x1bc
but task is already holding lock:
(inode_lock){--..}, at: [<c0187d46>] drop_pagecache+0x58/0xf9
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (inode_lock){--..}:
[<c0132a0a>] __lock_acquire+0xe31/0xfe9
[<c0132c2b>] lock_acquire+0x69/0x83
[<c0406fb5>] _spin_lock+0x35/0x42
[<c0187734>] __mark_inode_dirty+0x4f/0x163
[<c01533c2>] __set_page_dirty_nobuffers+0x99/0xf5
[<c018b0db>] mark_buffer_dirty+0x1f/0x25
[<c01b8e3d>] __journal_temp_unlink_buffer+0x88/0x1a8
[<c01b9192>] __journal_unfile_buffer+0xb/0x15
[<c01b9289>] __journal_refile_buffer+0xed/0xef
[<c01bc57c>] journal_commit_transaction+0xd8b/0x127f
[<c01c033b>] kjournald+0xac/0x1ed
[<c0127a05>] kthread+0xa2/0xc9
[<c01042af>] kernel_thread_helper+0x7/0x18
[<ffffffff>] 0xffffffff-> #0 (&journal->j_list_lock){--..}:
[<c0132873>] __lock_acquire+0xc9a/0xfe9
[<c0132c2b>] lock_acquire+0x69/0x83
[<c0406fb5>] _spin_lock+0x35/0x42
[<c01bb60e>] journal_try_to_free_buffers+0x151/0x1bc
[<c01ad9f3>] ext3_releasepage+0x3f/0x76
[<c014f6e4>] try_to_release_page+0x2f/0x4a
[<c0156588>] invalidate_mapping_pages+0xb6/0xee
[<c0187d94>] drop_pagecache+0xa6/0xf9
[<c0187e3b>] drop_caches_sysctl_handler+0x54/0x69
[<c01a2ccb>] proc_sys_write+0x80/0x8a
[<c016ce3d>] vfs_write+0x8b/0x11f
[<c016d371>] sys_write+0x3d/0x64
[<c0103f44>] sysenter_past_esp+0x5d/0x99
[<ffffffff>] 0xffffffffother info that might help us debug this:
2 locks held by bash/20633:
#0: (&type->s_umount_key#16){----}, at: [<c0187d35>] drop_pagecache+0x47/0xf9 #1: (inode_lock){--..}, at: [<c0187d46>] drop_pagecache+0x58/0xf9
stack backtrace: [<c0104614>] show_trace_log_lvl+0x1a/0x30 [<c01052c9>] show_trace+0x12/0x14 [<c0105355>] dump_stack+0x16/0x18 [<c01309f0>] print_circular_bug_tail+0x68/0x71 [<c0132873>] __lock_acquire+0xc9a/0xfe9 [<c0132c2b>] lock_acquire+0x69/0x83 [<c0406fb5>] _spin_lock+0x35/0x42 [<c01bb60e>] journal_try_to_free_buffers+0x151/0x1bc [<c01ad9f3>] ext3_releasepage+0x3f/0x76 [<c014f6e4>] try_to_release_page+0x2f/0x4a [<c0156588>] invalidate_mapping_pages+0xb6/0xee [<c0187d94>] drop_pagecache+0xa6/0xf9 [<c0187e3b>] drop_caches_sysctl_handler+0x54/0x69 [<c01a2ccb>] proc_sys_write+0x80/0x8a [<c016ce3d>] vfs_write+0x8b/0x11f [<c016d371>] sys_write+0x3d/0x64 [<c0103f44>] sysenter_past_esp+0x5d/0x99 =======================
2) This was found a couple minutes later when the system was really busy and close to oom condition.
INFO: lockdep is turned off.
BUG: soft lockup detected on CPU#0! [<c0104614>] show_trace_log_lvl+0x1a/0x30 [<c01052c9>] show_trace+0x12/0x14 [<c0105355>] dump_stack+0x16/0x18 [<c01467a0>] softlockup_tick+0x81/0xa8 [<c011e4dc>] run_local_timers+0x12/0x14 [<c011e8dd>] update_process_times+0x2b/0x63 [<c012e4be>] tick_sched_timer+0x4d/0x9e [<c012af00>] hrtimer_interrupt+0x12e/0x1a6 [<c0106f56>] timer_interrupt+0xe/0x15 [<c0146af3>] handle_IRQ_event+0x28/0x59 [<c01480a7>] handle_level_irq+0x6e/0xe7 [<c0105d3e>] do_IRQ+0x3d/0x7f [<c01041b2>] common_interrupt+0x2e/0x34 [<c011afef>] do_softirq+0x4d/0x50 [<c011b263>] irq_exit+0x7e/0x80 [<c0105d43>] do_IRQ+0x42/0x7f [<c01041b2>] common_interrupt+0x2e/0x34 [<c0178bf2>] core_sys_select+0x1c6/0x310 [<c0179101>] sys_select+0x39/0x18f [<c0103f44>] sysenter_past_esp+0x5d/0x99 ======================= Clocksource tsc unstable (delta = 9372804176 ns) Time: acpi_pm clocksource has been installed.
Please find .config attached. Not sure who to CC on this (as usual ;-)).
Regards,
Mariusz Kozlowski
#
# Automatically generated make config: don't edit # Linux kernel version: 2.6.21-rc5-mm1
# Tue Mar 27 07:33:50 2007
#CONFIG_X86_32=yCONFIG_GENERIC_TIME=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=yCONFIG_X86=yCONFIG_MMU=yCONFIG_ZONE_DMA=yCONFIG_GENERIC_ISA_DMA=yCONFIG_GENERIC_IOMAP=yCONFIG_GENERIC_BUG=yCONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=yCONFIG_DMI=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#CONFIG_EXPERIMENTAL=yCONFIG_BROKEN_ON_SMP=yCONFIG_LOCK_KERNEL=yCONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not setCONFIG_SWAP=yCONFIG_SWAP_PREFETCH=yCONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not setCONFIG_SYSVIPC_SYSCTL=yCONFIG_POSIX_MQUEUE=yCONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_UTS_NS is not setCONFIG_AUDIT=yCONFIG_AUDITSYSCALL=yCONFIG_IKCONFIG=yCONFIG_IKCONFIG_PROC=yCONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not setCONFIG_BLK_DEV_INITRD=yCONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not setCONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not setCONFIG_UID16=yCONFIG_SYSCTL_SYSCALL=yCONFIG_KALLSYMS=yCONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not setCONFIG_HOTPLUG=yCONFIG_PRINTK=yCONFIG_BUG=yCONFIG_ELF_CORE=yCONFIG_BASE_FULL=yCONFIG_FUTEX=yCONFIG_EPOLL=yCONFIG_SHMEM=yCONFIG_SLAB=yCONFIG_VM_EVENT_COUNTERS=yCONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not setCONFIG_BASE_SMALL=0
# CONFIG_SLOB is not setCONFIG_PAGE_GROUP_BY_MOBILITY=y
#
# Loadable module support
#CONFIG_MODULES=yCONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not setCONFIG_KMOD=y
#
# Process debugging support
#CONFIG_UTRACE=yCONFIG_PTRACE=y
#
# Block layer
#CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
#
# IO Schedulers
#CONFIG_IOSCHED_NOOP=yCONFIG_IOSCHED_AS=yCONFIG_IOSCHED_DEADLINE=yCONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not setCONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not setCONFIG_DEFAULT_IOSCHED="cfq"
#
# Processor type and features
#CONFIG_TICK_ONESHOT=yCONFIG_NO_HZ=yCONFIG_HIGH_RES_TIMERS=y
# CONFIG_SMP is not setCONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_PARAVIRT is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MCORE2 is not setCONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_X86_GENERIC is not setCONFIG_X86_CMPXCHG=yCONFIG_X86_L1_CACHE_SHIFT=7CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not setCONFIG_GENERIC_CALIBRATE_DELAY=yCONFIG_X86_WP_WORKS_OK=yCONFIG_X86_INVLPG=yCONFIG_X86_BSWAP=yCONFIG_X86_POPAD_OK=yCONFIG_X86_CMPXCHG64=yCONFIG_X86_GOOD_APIC=yCONFIG_X86_INTEL_USERCOPY=yCONFIG_X86_USE_PPRO_CHECKSUM=yCONFIG_X86_TSC=y
# CONFIG_HPET_TIMER is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not setCONFIG_PREEMPT=yCONFIG_PREEMPT_BKL=y
# CONFIG_X86_UP_APIC is not setCONFIG_X86_MCE=yCONFIG_X86_MCE_NONFATAL=yCONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not setCONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not setCONFIG_PAGE_OFFSET=0xC0000000CONFIG_ARCH_FLATMEM_ENABLE=yCONFIG_ARCH_SPARSEMEM_ENABLE=yCONFIG_ARCH_SELECT_MEMORY_MODEL=yCONFIG_ARCH_POPULATES_NODE_MAP=yCONFIG_SELECT_MEMORY_MODEL=yCONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not setCONFIG_FLATMEM=yCONFIG_FLAT_NODE_MEM_MAP=yCONFIG_SPARSEMEM_STATIC=yCONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not setCONFIG_ZONE_DMA_FLAG=1CONFIG_ADAPTIVE_READAHEAD=y
# CONFIG_DEBUG_READAHEAD is not set
# CONFIG_MATH_EMULATION is not setCONFIG_MTRR=y
# CONFIG_EFI is not setCONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not setCONFIG_HZ_1000=yCONFIG_HZ=1000
# CONFIG_KEXEC is not setCONFIG_PHYSICAL_START=0x100000
# CONFIG_RELOCATABLE is not setCONFIG_PHYSICAL_ALIGN=0x100000CONFIG_COMPAT_VDSO=y
#
# Power management options (ACPI, APM)
#CONFIG_PM=yCONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
# CONFIG_PM_SYSFS_DEPRECATED is not setCONFIG_SOFTWARE_SUSPEND=yCONFIG_PM_STD_PARTITION="/dev/hda2"
#
# ACPI (Advanced Configuration and Power Interface) Support #CONFIG_ACPI=yCONFIG_ACPI_SLEEP=yCONFIG_ACPI_SLEEP_PROC_FS=y
# CONFIG_ACPI_SLEEP_PROC_SLEEP is not set CONFIG_ACPI_PROCFS=yCONFIG_ACPI_AC=yCONFIG_ACPI_BATTERY=yCONFIG_ACPI_BUTTON=y
# CONFIG_ACPI_VIDEO is not setCONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set CONFIG_ACPI_PROCESSOR=yCONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not setCONFIG_ACPI_EC=yCONFIG_ACPI_POWER=yCONFIG_ACPI_SYSTEM=yCONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set CONFIG_ACPI_SBS=y
#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# CPU idle PM support
#
# CONFIG_CPU_IDLE is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not setCONFIG_PCI_GOANY=yCONFIG_PCI_BIOS=yCONFIG_PCI_DIRECT=yCONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_DEBUG is not setCONFIG_ISA_DMA_API=yCONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
#
# PCCARD (PCMCIA/CardBus) support
#CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not setCONFIG_PCMCIA=mCONFIG_PCMCIA_LOAD_CIS=yCONFIG_CARDBUS=y
#
# PC-card bridges
#CONFIG_YENTA=mCONFIG_YENTA_O2=yCONFIG_YENTA_RICOH=yCONFIG_YENTA_TI=yCONFIG_YENTA_ENE_TUNE=yCONFIG_YENTA_TOSHIBA=yCONFIG_PD6729=mCONFIG_I82092=mCONFIG_I82365=mCONFIG_TCIC=mCONFIG_PCMCIA_PROBE=yCONFIG_PCCARD_NONSTATIC=m
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#CONFIG_BINFMT_ELF=yCONFIG_BINFMT_AOUT=yCONFIG_BINFMT_MISC=y
#
# Networking
#CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not setCONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not setCONFIG_UNIX=yCONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_NET_KEY is not setCONFIG_INET=yCONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not setCONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not setCONFIG_INET_XFRM_MODE_TRANSPORT=yCONFIG_INET_XFRM_MODE_TUNNEL=yCONFIG_INET_XFRM_MODE_BEET=yCONFIG_INET_DIAG=yCONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not setCONFIG_TCP_CONG_CUBIC=yCONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not setCONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not set
# CONFIG_NF_CONNTRACK_ENABLED is not set
# CONFIG_NETFILTER_XTABLES is not set
#
# IP: Netfilter Configuration
#
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
#
# Wireless
#CONFIG_CFG80211=mCONFIG_CFG80211_WEXT_COMPAT=yCONFIG_NL80211=yCONFIG_WIRELESS_EXT=yCONFIG_MAC80211=m
# CONFIG_MAC80211_DEBUG is not setCONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not setCONFIG_IEEE80211_CRYPT_WEP=mCONFIG_IEEE80211_CRYPT_CCMP=mCONFIG_IEEE80211_CRYPT_TKIP=mCONFIG_IEEE80211_SOFTMAC=m
# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
#
# Device Drivers
#
#
# Generic Driver Options
#CONFIG_STANDALONE=yCONFIG_PREVENT_FIRMWARE_BUILD=yCONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker #
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#CONFIG_PARPORT=yCONFIG_PARPORT_PC=y
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_PC_PCMCIA is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
# CONFIG_PARPORT_1284 is not set
#
# Plug and Play support
#CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
# CONFIG_ISAPNP is not set
# CONFIG_PNPBIOS is not setCONFIG_PNPACPI=y
#
# Block devices
#CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_MSI_LAPTOP is not setCONFIG_SONY_LAPTOP=y
# CONFIG_ACPI_IBM is not set
#
# ATA/ATAPI/MFM/RLL support
#CONFIG_IDE=yCONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives #
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=yCONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_BLK_DEV_IDECS is not set
# CONFIG_BLK_DEV_DELKIN is not set CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_BLK_DEV_IDEACPI is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not setCONFIG_BLK_DEV_IDEPCI=yCONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not setCONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not setCONFIG_BLK_DEV_ALI15X3=y
# CONFIG_WDC_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_CS5535 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
# CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not setCONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not setCONFIG_SCSI=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not setCONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not setCONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs #
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
#
# PCMCIA SCSI adapter support
#
# CONFIG_PCMCIA_AHA152X is not set
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_NINJA_SCSI is not set
# CONFIG_PCMCIA_QLOGIC is not set
# CONFIG_PCMCIA_SYM53C500 is not set
#
# Serial ATA (prod) and Parallel ATA (experimental) drivers #
# CONFIG_ATA is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#CONFIG_FIREWIRE=m
# CONFIG_FIREWIRE_OHCI is not set
# CONFIG_FIREWIRE_SBP2 is not setCONFIG_IEEE1394=y
#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_IEEE1394_EXTRA_CONFIG_ROMS is not set
#
# Device Drivers
#
#
# Texas Instruments PCILynx requires I2C
#CONFIG_IEEE1394_OHCI1394=y
#
# Protocol Drivers
#
# CONFIG_IEEE1394_VIDEO1394 is not set
# CONFIG_IEEE1394_SBP2 is not set
# CONFIG_IEEE1394_ETH1394 is not set
# CONFIG_IEEE1394_DV1394 is not setCONFIG_IEEE1394_RAWIO=y
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Macintosh device drivers
#
# CONFIG_MAC_EMUMOUSEBTN is not set
#
# Network device support
#CONFIG_NETDEVICES=yCONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#CONFIG_NET_ETHERNET=yCONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not setCONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not setCONFIG_8139TOO=mCONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_VIOC is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not setCONFIG_WLAN_80211=y
# CONFIG_PCMCIA_RAYCS is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_AIRO is not setCONFIG_HERMES=m
# CONFIG_PLX_HERMES is not set
# CONFIG_TMD_HERMES is not set
# CONFIG_NORTEL_HERMES is not set
# CONFIG_PCI_HERMES is not set
# CONFIG_ATMEL is not setCONFIG_PCMCIA_HERMES=m
# CONFIG_PCMCIA_SPECTRUM is not set
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_HOSTAP is not set
# CONFIG_BCM43XX is not set
# CONFIG_ZD1211RW is not set
# CONFIG_BCM43XX_MAC80211 is not set
# CONFIG_RT2X00 is not set
# CONFIG_ADM8211 is not set
# CONFIG_P54_COMMON is not set
# CONFIG_ZD1211RW_MAC80211 is not set
# CONFIG_RTL818X is not set
# CONFIG_RTL8187 is not set
#
# PCMCIA network device support
#
# CONFIG_NET_PCMCIA is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not setCONFIG_NETCONSOLE=mCONFIG_NETPOLL=yCONFIG_NETPOLL_RX=yCONFIG_NETPOLL_TRAP=yCONFIG_NET_POLL_CONTROLLER=y
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
#CONFIG_INPUT_MOUSEDEV=yCONFIG_INPUT_MOUSEDEV_PSAUX=yCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=yCONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not setCONFIG_INPUT_MOUSE=yCONFIG_MOUSE_PS2=yCONFIG_MOUSE_PS2_ALPS=yCONFIG_MOUSE_PS2_LOGIPS2PP=yCONFIG_MOUSE_PS2_SYNAPTICS=yCONFIG_MOUSE_PS2_LIFEBOOK=yCONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#CONFIG_SERIO=yCONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not setCONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#CONFIG_VT=yCONFIG_VT_CONSOLE=yCONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_JSM is not setCONFIG_UNIX98_PTYS=yCONFIG_LEGACY_PTYS=yCONFIG_LEGACY_PTY_COUNT=256CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not setCONFIG_SONYPI=mCONFIG_AGP=y
# CONFIG_AGP_ALI is not setCONFIG_AGP_ATI=y
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not setCONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not setCONFIG_DRM_RADEON=y
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_IPWIRELESS_CS is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# SPI support
#CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not setCONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_BUTTERFLY is not set
#
# SPI Protocol Masters
#
# CONFIG_SPI_AT25 is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
# CONFIG_BACKLIGHT_LCD_SUPPORT is not setCONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_PROGEAR is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not setCONFIG_FB=yCONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not setCONFIG_FB_CFB_FILLRECT=yCONFIG_FB_CFB_COPYAREA=yCONFIG_FB_CFB_IMAGEBLIT=yCONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
#
# Frambuffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not setCONFIG_FB_VESA=y
# CONFIG_FB_HECUBA is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#CONFIG_VGA_CONSOLE=yCONFIG_VGACON_SOFT_SCROLLBACK=yCONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64CONFIG_VIDEO_SELECT=y
# CONFIG_MDA_CONSOLE is not setCONFIG_DUMMY_CONSOLE=yCONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#CONFIG_LOGO=yCONFIG_LOGO_LINUX_MONO=yCONFIG_LOGO_LINUX_VGA16=yCONFIG_LOGO_LINUX_CLUT224=y
#
# Sound
#CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#CONFIG_SND=yCONFIG_SND_TIMER=yCONFIG_SND_PCM=yCONFIG_SND_RAWMIDI=yCONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not setCONFIG_SND_OSSEMUL=yCONFIG_SND_MIXER_OSS=yCONFIG_SND_PCM_OSS=yCONFIG_SND_PCM_OSS_PLUGINS=yCONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_DYNAMIC_MINORS is not setCONFIG_SND_SUPPORT_OLD_API=yCONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#CONFIG_SND_MPU401_UART=yCONFIG_SND_AC97_CODEC=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_PORTMAN2X4 is not set
#
# ISA devices
#
# CONFIG_SND_ADLIB is not set
# CONFIG_SND_AD1816A is not set
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_ALS100 is not set
# CONFIG_SND_AZT2320 is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_DT019X is not set
# CONFIG_SND_ES968 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_MIRO is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set
# CONFIG_SND_WAVEFRONT is not set
#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not setCONFIG_SND_ALI5451=y
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_AC97_POWER_SAVE is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
#
# SoC audio support
#
# CONFIG_SND_SOC is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not setCONFIG_AC97_BUS=y
#
# HID Devices
#CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
# USB Input Devices
#CONFIG_USB_HID=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
#
# USB support
#CONFIG_USB_ARCH_HAS_HCD=yCONFIG_USB_ARCH_HAS_OHCI=yCONFIG_USB_ARCH_HAS_EHCI=yCONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#CONFIG_USB_EHCI_HCD=yCONFIG_USB_EHCI_SPLIT_ISO=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not setCONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not setCONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not setCONFIG_USB_PRINTER=y
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' #
#
# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y CONFIG_USB_STORAGE_ISD200=y CONFIG_USB_STORAGE_DPCM=y CONFIG_USB_STORAGE_USBAT=y CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_TOUCHSCREEN is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
# CONFIG_USB_GTCO is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not setCONFIG_USB_MON=y
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_GOTEMP is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
#
# MMC/SD Card Drivers
#CONFIG_MMC_BLOCK=m
#
# MMC/SD Host Controller Drivers
#CONFIG_MMC_SDHCI=mCONFIG_MMC_WBSD=m
# CONFIG_MMC_TIFM_SD is not set
#
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# LED drivers
#
#
# LED Triggers
#
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) #CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not setCONFIG_EDAC_MM_EDAC=y
# CONFIG_EDAC_AMD76X is not set
# CONFIG_EDAC_E7XXX is not set
# CONFIG_EDAC_E752X is not set
# CONFIG_EDAC_I82875P is not set
# CONFIG_EDAC_I82860 is not set
# CONFIG_EDAC_K8 is not set
# CONFIG_EDAC_R82600 is not setCONFIG_EDAC_POLL=y
#
# Real Time Clock
#
# CONFIG_RTC_CLASS is not set
#
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set
#
# DMA Clients
#CONFIG_ASYNC_TX_DMA=y
#
# DMA Devices
#
#
# Auxiliary Display support
#
# CONFIG_KS0108 is not set
#
# Virtualization
#
# CONFIG_KVM is not set
#
# Userspace I/O
#
# CONFIG_UIO is not set
#
# File systems
#CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not setCONFIG_EXT3_FS=yCONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not setCONFIG_JBD=y
# CONFIG_JBD_DEBUG is not setCONFIG_FS_MBCACHE=y
# CONFIG_REISER4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not setCONFIG_INOTIFY=yCONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not setCONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not setCONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#CONFIG_ISO9660_FS=yCONFIG_JOLIET=y
# CONFIG_ZISOFS is not setCONFIG_UDF_FS=yCONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#CONFIG_FAT_FS=yCONFIG_MSDOS_FS=yCONFIG_VFAT_FS=yCONFIG_FAT_DEFAULT_CODEPAGE=1250CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-2"CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not setCONFIG_NTFS_RW=y
#
# Pseudo filesystems
#CONFIG_PROC_FS=yCONFIG_PROC_KCORE=yCONFIG_PROC_SYSCTL=yCONFIG_SYSFS=yCONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not setCONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# Layered filesystems
#
# CONFIG_UNION_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#CONFIG_NFS_FS=yCONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not setCONFIG_NFSD=yCONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not setCONFIG_NFSD_TCP=yCONFIG_LOCKD=yCONFIG_LOCKD_V4=yCONFIG_EXPORTFS=yCONFIG_NFS_COMMON=yCONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not setCONFIG_SMB_FS=yCONFIG_SMB_NLS_DEFAULT=yCONFIG_SMB_NLS_REMOTE="cp1250"
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not setCONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#CONFIG_NLS=yCONFIG_NLS_DEFAULT="iso8859-2"CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not setCONFIG_NLS_CODEPAGE_852=y
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not setCONFIG_NLS_CODEPAGE_1250=m
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not setCONFIG_NLS_ISO8859_1=mCONFIG_NLS_ISO8859_2=y
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Distributed Lock Manager
#
# CONFIG_DLM is not set
#
# Instrumentation Support
#
# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set
# CONFIG_MARKERS is not set
#
# Kernel hacking
#CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_MUST_CHECK is not setCONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_PAGE_OWNER is not setCONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not setCONFIG_DEBUG_KERNEL=yCONFIG_DEBUG_SHIRQ=yCONFIG_LOG_BUF_SHIFT=17CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not setCONFIG_DEBUG_SLAB=yCONFIG_DEBUG_SLAB_LEAK=yCONFIG_DEBUG_PREEMPT=yCONFIG_DEBUG_RT_MUTEXES=yCONFIG_DEBUG_PI_LIST=yCONFIG_RT_MUTEX_TESTER=yCONFIG_DEBUG_SPINLOCK=yCONFIG_DEBUG_MUTEXES=yCONFIG_DEBUG_LOCK_ALLOC=yCONFIG_PROVE_LOCKING=yCONFIG_LOCKDEP=yCONFIG_DEBUG_LOCKDEP=yCONFIG_TRACE_IRQFLAGS=yCONFIG_DEBUG_SPINLOCK_SLEEP=yCONFIG_DEBUG_LOCKING_API_SELFTESTS=yCONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not setCONFIG_DEBUG_BUGVERBOSE=yCONFIG_DEBUG_INFO=yCONFIG_DEBUG_VM=yCONFIG_DEBUG_LIST=yCONFIG_FRAME_POINTER=y
# CONFIG_PROFILE_LIKELY is not setCONFIG_FORCED_INLINING=y
# CONFIG_DEBUG_SYNCHRO_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not setCONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
#
# Page alloc debug is incompatible with Software Suspend on i386 #
# CONFIG_DEBUG_RODATA is not setCONFIG_DOUBLEFAULT=y
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_INTEGRITY is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
#
# Cryptographic options
#CONFIG_CRYPTO=yCONFIG_CRYPTO_ALGAPI=mCONFIG_CRYPTO_BLKCIPHER=mCONFIG_CRYPTO_MANAGER=m
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not setCONFIG_CRYPTO_SHA1=mCONFIG_CRYPTO_SHA256=m
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_GF128MUL is not setCONFIG_CRYPTO_ECB=mCONFIG_CRYPTO_CBC=mCONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_586 is not set
# CONFIG_CRYPTO_SERPENT is not setCONFIG_CRYPTO_AES=m
# CONFIG_CRYPTO_AES_586 is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not setCONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_DEFLATE is not setCONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#CONFIG_CRYPTO_DEV_PADLOCK=mCONFIG_CRYPTO_DEV_PADLOCK_AES=mCONFIG_CRYPTO_DEV_PADLOCK_SHA=mCONFIG_CRYPTO_DEV_GEODE=m
#
# Library routines
#CONFIG_BITREVERSE=yCONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not setCONFIG_CRC32=y
# CONFIG_CRC_ITU_T is not setCONFIG_LIBCRC32C=m
# CONFIG_EEPROM_93CX6 is not setCONFIG_AUDIT_GENERIC=yCONFIG_PLIST=yCONFIG_HAS_IOMEM=yCONFIG_HAS_IOPORT=yCONFIG_HAS_DMA=yCONFIG_GENERIC_HARDIRQS=yCONFIG_GENERIC_IRQ_PROBE=yCONFIG_X86_BIOS_REBOOT=yCONFIG_KTIME_SCALAR=y
Hello,
Quoted 6 lines
The difference is that it happened when I closed the lid in my laptop. When reopend it the box was frozen (ACPI?). Again disk I/O was dead so nothing was found in syslog.
I tried to reproduce it and capture something with netconsole. I tortured the box for a few hours but the system did not hang. I pushed
Ok. Another hang happend on almost idle system when I was away from it. Keyboard looked dead. Netconsole with sysrq not working. No idea what happend. Did not touch the lid this time.
So far 3 hangs in ~15 hours. Hard to trigger. It just happens from time to time.
Will investigate.
Regards,
Mariusz Kozlowski
Quoted 7 lines · On Wed, 28 Mar 2007 18:44:57 +0200 Mariusz Koz__owski <[email protected]>…
Hello,
I run 2.6.21-rc4-mm1 with no hangs for a week.
Then when 2.6.21-rc5-mm1 showed up so I switched to it. Unfortunately today my laptop hunged twice in a similar way as described here:http://www.ussg.iu.edu/hypermail/linux/kernel/0703.0/index.html#1165
It's not good that we went backwards between those two releases.
Quoted 4 lines
The difference is that it happened when I closed the lid in my laptop. When reopend it the box was frozen (ACPI?). Again disk I/O was dead so nothing was found in syslog.
Adrian, does this look like any of the bugs whcih you're monitoring?
Quoted 17 lines
I tried to reproduce it and capture something with netconsole. I tortured the box for a few hours but the system did not hang. I pushed the box real hard and what I got was only oom-killer firing etc ;-) Anyway I found something else you might be interested in:
1) This happened when 'echo 3 >
/proc/sys/vm/drop_caches' on really busy system.=======================================================
[ INFO: possible circular locking dependency detected ]
2.6.21-rc5-mm1 #1
-------------------------------------------------------
bash/20633 is trying to acquire lock:
(&journal->j_list_lock){--..}, at: [<c01bb60e>]journal_try_to_free_buffers+0x151/0x1bc
Quoted 2 lines
but task is already holding lock:
(inode_lock){--..}, at: [<c0187d46>]drop_pagecache+0x58/0xf9
Yeah, that's a lock ranking error in the drop_caches code. I have a super-long-term plan to fix it, but in the short term nothing suggests itself apart from removing the drop_caches code, I'm afraid.
Quoted 30 lines
2) This was found a couple minutes later when the system was really busy and close to oom condition.
INFO: lockdep is turned off.
BUG: soft lockup detected on CPU#0! [<c0104614>] show_trace_log_lvl+0x1a/0x30 [<c01052c9>] show_trace+0x12/0x14 [<c0105355>] dump_stack+0x16/0x18 [<c01467a0>] softlockup_tick+0x81/0xa8 [<c011e4dc>] run_local_timers+0x12/0x14 [<c011e8dd>] update_process_times+0x2b/0x63 [<c012e4be>] tick_sched_timer+0x4d/0x9e [<c012af00>] hrtimer_interrupt+0x12e/0x1a6 [<c0106f56>] timer_interrupt+0xe/0x15 [<c0146af3>] handle_IRQ_event+0x28/0x59 [<c01480a7>] handle_level_irq+0x6e/0xe7 [<c0105d3e>] do_IRQ+0x3d/0x7f [<c01041b2>] common_interrupt+0x2e/0x34 [<c011afef>] do_softirq+0x4d/0x50 [<c011b263>] irq_exit+0x7e/0x80 [<c0105d43>] do_IRQ+0x42/0x7f [<c01041b2>] common_interrupt+0x2e/0x34 [<c0178bf2>] core_sys_select+0x1c6/0x310 [<c0179101>] sys_select+0x39/0x18f [<c0103f44>] sysenter_past_esp+0x5d/0x99 ======================= Clocksource tsc unstable (delta = 9372804176 ns) Time: acpi_pm clocksource has been installed.
Quoted 2 lines
Please find .config attached. Not sure who to CC on this (as usual ;-)).
I do ;)
Quoted 11 lines · Andrew Morton
Quoted 7 lines · On Wed, 28 Mar 2007 18:44:57 +0200 Mariusz Koz__owski <[email protected]>…
Hello,
I run 2.6.21-rc4-mm1 with no hangs for a week.
Then when 2.6.21-rc5-mm1 showed up so I switched to it. Unfortunately today my laptop hunged twice in a similar way as described here:http://www.ussg.iu.edu/hypermail/linux/kernel/0703.0/index.html#1165
Quoted 8 lines
It's not good that we went backwards between those two releases.
Quoted 3 lines
The difference is that it happened when I closed the lid in my laptop. When reopend it the box was frozen (ACPI?). Again disk I/O was dead so nothing was found in syslog.
Adrian, does this look like any of the bugs whcih you're monitoring?
...
Is it also present in 2.6.21-rc5?
Is it also present with CONFIG_NO_HZ=n?
cu
Adrian
Signature · 4 lines
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon SeedHello,
Quoted 8 lines
Quoted 8 lines
Quoted 5 lines
I run 2.6.21-rc4-mm1 with no hangs for a week.
Then when 2.6.21-rc5-mm1 showed up so I switched to it. Unfortunately today my laptop hunged twice in a similar way as described here:http://www.ussg.iu.edu/hypermail/linux/kernel/0703.0/index.html#1165
It's not good that we went backwards between those two releases.
Quoted 8 lines
Quoted 6 lines
Quoted 3 lines
The difference is that it happened when I closed the lid in my laptop. When reopend it the box was frozen (ACPI?). Again disk I/O was dead so nothing was found in syslog.
Adrian, does this look like any of the bugs whcih you're monitoring?
...Is it also present in 2.6.21-rc5?
Don't know. I usualy test -mm series. Will test tommorow and let you know after some reasonable uptime.
Quoted 1 line
Is it also present with
CONFIG_NO_HZ=n?
Don't know. Did not try recently. Will let you know.
It takes time as these hangs are not easy to trigger. With 2.6.21-rc2-mm1 it was easy -> push the system and watch it die in minutes. With 2.6.21-rc5-mm1 it takes hours (3 hangs in ~15 hours) and not sure how to trigger it. It just happens from time to time.
Quoted 2 lines
cu
Adrian
Regards,
Mariusz Kozlowski
Hello,
Quoted 20 lines
Quoted 8 lines
Quoted 8 lines
Quoted 5 lines
I run 2.6.21-rc4-mm1 with no hangs for a week.
Then when 2.6.21-rc5-mm1 showed up so I switched to it. Unfortunately today my laptop hunged twice in a similar way as described here:http://www.ussg.iu.edu/hypermail/linux/kernel/0703.0/index.html#1165
It's not good that we went backwards between those two releases.
Quoted 8 lines
Quoted 6 lines
Quoted 3 lines
The difference is that it happened when I closed the lid in my laptop. When reopend it the box was frozen (ACPI?). Again disk I/O was dead so nothing was found in syslog.
Adrian, does this look like any of the bugs whcih you're monitoring?
...Is it also present in 2.6.21-rc5?
Don't know. I usualy test -mm series. Will test tommorow and let you know after some reasonable uptime.
Quoted 8 lines
Quoted 1 line
Is it also present with
CONFIG_NO_HZ=n?Don't know. Did not try recently. Will let you know.
It takes time as these hangs are not easy to trigger. With 2.6.21-rc2-mm1 it was easy -> push the system and watch it die in minutes. With 2.6.21-rc5-mm1 it takes hours (3 hangs in ~15 hours) and not sure how to trigger it. It just happens from time to time.
Ok. CONGIG_NO_HZ=n and uptime ~12 hours, netconsole loaded, and no hangs ... until I moved my laptop. The same scenario happened yesterday during the last hang. I started playing and repeating some steps which I naturally do when I move my laptop.
An hour later I came to this -> steps to hang 2.6.21-rc5-mm1 on my laptop:
1. boot the system and login as root
2. load netconsole (insmod netconole.ko netconsole=blah... blah...)
3. unplug the cable (link goes down)
4. system is frozen until forced to reboot
This is verified and repeatable _every_ single time I tried. Unfortunately the last thing seen on the screen before system is frozen is 'eth0: link down'. So my guess is that when hunting for hangs I found something else that can hang my laptop (netconsole that is).
Regards,
Mariusz Kozlowski
Quoted 42 lines · On Thu, 29 Mar 2007 20:01:40 +0200 Mariusz Kozłowski <[email protected]>…
Hello,
Quoted 20 lines
Quoted 8 lines
Quoted 8 lines
Quoted 5 lines
I run 2.6.21-rc4-mm1 with no hangs for a week.
Then when 2.6.21-rc5-mm1 showed up so I switched to it. Unfortunately today my laptop hunged twice in a similar way as described here:http://www.ussg.iu.edu/hypermail/linux/kernel/0703.0/index.html#1165
It's not good that we went backwards between those two releases.
Quoted 8 lines
Quoted 6 lines
Quoted 3 lines
The difference is that it happened when I closed the lid in my laptop. When reopend it the box was frozen (ACPI?). Again disk I/O was dead so nothing was found in syslog.
Adrian, does this look like any of the bugs whcih you're monitoring?
...Is it also present in 2.6.21-rc5?
Don't know. I usualy test -mm series. Will test tommorow and let you know after some reasonable uptime.
Quoted 8 lines
Quoted 1 line
Is it also present with
CONFIG_NO_HZ=n?Don't know. Did not try recently. Will let you know.
It takes time as these hangs are not easy to trigger. With 2.6.21-rc2-mm1 it was easy -> push the system and watch it die in minutes. With 2.6.21-rc5-mm1 it takes hours (3 hangs in ~15 hours) and not sure how to trigger it. It just happens from time to time.
Ok. CONGIG_NO_HZ=n and uptime ~12 hours, netconsole loaded, and no hangs ... until I moved my laptop. The same scenario happened yesterday during the last hang. I started playing and repeating some steps which I naturally do when I move my laptop.
An hour later I came to this -> steps to hang 2.6.21-rc5-mm1 on my laptop:
1. boot the system and login as root
2. load netconsole (insmod netconole.ko netconsole=blah... blah...)
3. unplug the cable (link goes down)
4. system is frozen until forced to reboot
Quoted 5 lines
This is verified and repeatable _every_ single time I tried. Unfortunately the last thing seen on the screen before system is frozen is 'eth0: link down'. So my guess is that when hunting for hangs I found something else that can hang my laptop (netconsole that is).
fix-sysfs-reclaim-crash.patch is known-bad. Did you try reverting that?
Hello,
Quoted 6 lines
Quoted 6 lines
Ok. CONGIG_NO_HZ=n and uptime ~12 hours, netconsole loaded, and no hangs ... until I moved my laptop. The same scenario happened yesterday during the last hang. I started playing and repeating some steps which I naturally do when I move my laptop.
An hour later I came to this -> steps to hang 2.6.21-rc5-mm1 on my laptop:
Ok. Failed to mention one important step -> alt-sysrq-7. With alt-sysrq-{1...6} it does not hang.
1. boot the system and login as root
2. load netconsole (insmod netconole.ko netconsole=blah... blah...)
3. issue alt-sysrq-7
4. unplug the cable (link goes down)
5. system is frozen until forced to reboot
Quoted 6 lines
Quoted 4 lines
This is verified and repeatable _every_ single time I tried. Unfortunately the last thing seen on the screen before system is frozen is 'eth0: link down'. So my guess is that when hunting for hangs I found something else that can hang my laptop (netconsole that is).
fix-sysfs-reclaim-crash.patch is known-bad. Did you try reverting that?
Yes, just tested it. Sorry. It doesn't change anything.
Regards,
Mariusz Kozlowski
Quoted 10 lines · Mariusz Kozłowski
Quoted 8 lines
Quoted 5 lines
This is verified and repeatable _every_ single time I tried. Unfortunately the last thing seen on the screen before system is frozen is 'eth0: link down'. So my guess is that when hunting for hangs I found something else that can hang my laptop (netconsole that is).
fix-sysfs-reclaim-crash.patch is known-bad. Did you try reverting that?
Yes, just tested it. Sorry. It doesn't change anything.
could you try a !CONFIG_SMP kernel to make sure it's not some self-locking of netconsole that is interfering? (Is it perhaps the 'eth0: link down' message that is trigger from within netconsole?)
Ingo
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 5 lines
This is verified and repeatable _every_ single time I tried. Unfortunately the last thing seen on the screen before system is frozen is 'eth0: link down'. So my guess is that when hunting for hangs I found something else that can hang my laptop (netconsole that is).
Quoted 8 lines
Quoted 4 lines
Quoted 2 lines
fix-sysfs-reclaim-crash.patch is known-bad. Did you try reverting that?
Yes, just tested it. Sorry. It doesn't change anything.
could you try a !CONFIG_SMP kernel to make sure it's not some self-locking of netconsole that is interfering? (Is it perhaps the 'eth0: link down' message that is trigger from within netconsole?)
This is from .config:
# CONFIG_SMP is not set
Can this be that 'link down' is emitted by netconsole when the link is already down and kernel gets locked? Does it make any sense?
Mariusz
Quoted 15 lines · Mariusz Kozłowski
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 5 lines
This is verified and repeatable _every_ single time I tried. Unfortunately the last thing seen on the screen before system is frozen is 'eth0: link down'. So my guess is that when hunting for hangs I found something else that can hang my laptop (netconsole that is).
Quoted 8 lines
Quoted 4 lines
Quoted 2 lines
fix-sysfs-reclaim-crash.patch is known-bad. Did you try reverting that?
Yes, just tested it. Sorry. It doesn't change anything.
could you try a !CONFIG_SMP kernel to make sure it's not some self-locking of netconsole that is interfering? (Is it perhaps the 'eth0: link down' message that is trigger from within netconsole?)
Quoted 6 lines
This is from .config:
#
CONFIG_SMPis not setCan this be that 'link down' is emitted by netconsole when the link is already down and kernel gets locked? Does it make any sense?
Yes, that's probably exactly the problem. But it probably involves locks.
I think a preemptible kernel can also cause the problem?
Signature · 1 line
Mathematics is the supreme nostalgia of our time.
Quoted 42 lines · Mariusz Kozłowski
Hello,
Quoted 20 lines
Quoted 8 lines
Quoted 8 lines
Quoted 5 lines
I run 2.6.21-rc4-mm1 with no hangs for a week.
Then when 2.6.21-rc5-mm1 showed up so I switched to it. Unfortunately today my laptop hunged twice in a similar way as described here:http://www.ussg.iu.edu/hypermail/linux/kernel/0703.0/index.html#1165
It's not good that we went backwards between those two releases.
Quoted 8 lines
Quoted 6 lines
Quoted 3 lines
The difference is that it happened when I closed the lid in my laptop. When reopend it the box was frozen (ACPI?). Again disk I/O was dead so nothing was found in syslog.
Adrian, does this look like any of the bugs whcih you're monitoring?
...Is it also present in 2.6.21-rc5?
Don't know. I usualy test -mm series. Will test tommorow and let you know after some reasonable uptime.
Quoted 8 lines
Quoted 1 line
Is it also present with
CONFIG_NO_HZ=n?Don't know. Did not try recently. Will let you know.
It takes time as these hangs are not easy to trigger. With 2.6.21-rc2-mm1 it was easy -> push the system and watch it die in minutes. With 2.6.21-rc5-mm1 it takes hours (3 hangs in ~15 hours) and not sure how to trigger it. It just happens from time to time.
Ok. CONGIG_NO_HZ=n and uptime ~12 hours, netconsole loaded, and no hangs ... until I moved my laptop. The same scenario happened yesterday during the last hang. I started playing and repeating some steps which I naturally do when I move my laptop.
An hour later I came to this -> steps to hang 2.6.21-rc5-mm1 on my laptop:
1. boot the system and login as root
2. load netconsole (insmod netconole.ko netconsole=blah... blah...)
3. unplug the cable (link goes down)
4. system is frozen until forced to reboot
Quoted 4 lines
This is verified and repeatable _every_ single time I tried. Unfortunately the last thing seen on the screen before system is frozen is 'eth0: link down'. So my guess is that when hunting for hangs I found something else that can hang my laptop (netconsole that is).
Which NIC do you have? Odds are that the driver is doing that printk while holding a driver-internal spinlock that causes it to deadlock when netpoll tries to send that message out.
BTW, I guess David Miller is the defacto netpoll maintainer these days as most of the patches to it in the past year or two were not even cc:ed to me.
Signature · 1 line
Mathematics is the supreme nostalgia of our time.
Quoted 40 lines
Quoted 40 lines
Quoted 20 lines
Quoted 8 lines
Quoted 8 lines
Quoted 5 lines
I run 2.6.21-rc4-mm1 with no hangs for a week.
Then when 2.6.21-rc5-mm1 showed up so I switched to it. Unfortunately today my laptop hunged twice in a similar way as described here:http://www.ussg.iu.edu/hypermail/linux/kernel/0703.0/index.html#1165
It's not good that we went backwards between those two releases.
Quoted 8 lines
Quoted 6 lines
Quoted 3 lines
The difference is that it happened when I closed the lid in my laptop. When reopend it the box was frozen (ACPI?). Again disk I/O was dead so nothing was found in syslog.
Adrian, does this look like any of the bugs whcih you're monitoring?
...Is it also present in 2.6.21-rc5?
Don't know. I usualy test -mm series. Will test tommorow and let you know after some reasonable uptime.
Quoted 8 lines
Quoted 1 line
Is it also present with
CONFIG_NO_HZ=n?Don't know. Did not try recently. Will let you know.
It takes time as these hangs are not easy to trigger. With 2.6.21-rc2-mm1 it was easy -> push the system and watch it die in minutes. With 2.6.21-rc5-mm1 it takes hours (3 hangs in ~15 hours) and not sure how to trigger it. It just happens from time to time.
Ok. CONGIG_NO_HZ=n and uptime ~12 hours, netconsole loaded, and no hangs ... until I moved my laptop. The same scenario happened yesterday during the last hang. I started playing and repeating some steps which I naturally do when I move my laptop.
An hour later I came to this -> steps to hang 2.6.21-rc5-mm1 on my laptop:
1. boot the system and login as root
2. load netconsole (insmod netconole.ko netconsole=blah... blah...)
3. unplug the cable (link goes down)
4. system is frozen until forced to reboot
Quoted 8 lines
Quoted 4 lines
This is verified and repeatable _every_ single time I tried. Unfortunately the last thing seen on the screen before system is frozen is 'eth0: link down'. So my guess is that when hunting for hangs I found something else that can hang my laptop (netconsole that is).
Which NIC do you have? Odds are that the driver is doing that printk while holding a driver-internal spinlock that causes it to deadlock when netpoll tries to send that message out.
8139too was in use. This is from lspci:
00:12.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Sony Corporation Unknown device 8158
Flags: bus master, medium devsel, latency 64, IRQ 11
I/O ports at 9c00 [size=256]
Memory at f0404c00 (32-bit, non-prefetchable) [size=512]
Capabilities: [50] Power Management version 2
Quoted 3 lines
BTW, I guess David Miller is the defacto netpoll maintainer these days as most of the patches to it in the past year or two were not even cc:ed to me.
Ok sorry. I was looking at Documentation/networking/netconsole.txt -> 'Please send bug reports to Matt Mackall <[email protected]>'. David added to CC.
Thanks.
Quoted 49 lines · Mariusz Kozłowski
Quoted 40 lines
Quoted 40 lines
Quoted 20 lines
Quoted 8 lines
Quoted 8 lines
Quoted 5 lines
I run 2.6.21-rc4-mm1 with no hangs for a week.
Then when 2.6.21-rc5-mm1 showed up so I switched to it. Unfortunately today my laptop hunged twice in a similar way as described here:http://www.ussg.iu.edu/hypermail/linux/kernel/0703.0/index.html#1165
It's not good that we went backwards between those two releases.
Quoted 8 lines
Quoted 6 lines
Quoted 3 lines
The difference is that it happened when I closed the lid in my laptop. When reopend it the box was frozen (ACPI?). Again disk I/O was dead so nothing was found in syslog.
Adrian, does this look like any of the bugs whcih you're monitoring?
...Is it also present in 2.6.21-rc5?
Don't know. I usualy test -mm series. Will test tommorow and let you know after some reasonable uptime.
Quoted 8 lines
Quoted 1 line
Is it also present with
CONFIG_NO_HZ=n?Don't know. Did not try recently. Will let you know.
It takes time as these hangs are not easy to trigger. With 2.6.21-rc2-mm1 it was easy -> push the system and watch it die in minutes. With 2.6.21-rc5-mm1 it takes hours (3 hangs in ~15 hours) and not sure how to trigger it. It just happens from time to time.
Ok. CONGIG_NO_HZ=n and uptime ~12 hours, netconsole loaded, and no hangs ... until I moved my laptop. The same scenario happened yesterday during the last hang. I started playing and repeating some steps which I naturally do when I move my laptop.
An hour later I came to this -> steps to hang 2.6.21-rc5-mm1 on my laptop:
1. boot the system and login as root
2. load netconsole (insmod netconole.ko netconsole=blah... blah...)
3. unplug the cable (link goes down)
4. system is frozen until forced to rebootQuoted 8 lines
Quoted 4 lines
This is verified and repeatable _every_ single time I tried. Unfortunately the last thing seen on the screen before system is frozen is 'eth0: link down'. So my guess is that when hunting for hangs I found something else that can hang my laptop (netconsole that is).
Which NIC do you have? Odds are that the driver is doing that printk while holding a driver-internal spinlock that causes it to deadlock when netpoll tries to send that message out.
Quoted 8 lines
8139too was in use. This is from lspci:
00:12.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Sony Corporation Unknown device 8158
Flags: bus master, medium devsel, latency 64, IRQ 11
I/O ports at 9c00 [size=256]
Memory atf0404c00(32-bit, non-prefetchable) [size=512]
Capabilities: [50] Power Management version 2
Yep, that's a known problem with this driver:
http://lkml.org/lkml/2007/2/17/222
This was a known theoretical problem with netconsole from the start but I'm actually not aware of any other drivers that have run into it. My preferred fix is to create a netconsole_disable/enable API for drivers that have this sort of reentrancy problem.
Signature · 1 line
Mathematics is the supreme nostalgia of our time.
Quoted 22 lines · Andrew Morton
Quoted 20 lines · On Wed, 28 Mar 2007 18:44:57 +0200 Mariusz Koz__owski <[email protected]>…
2) This was found a couple minutes later when the system was really busy and close to oom condition.
INFO: lockdep is turned off.
BUG: soft lockup detected on CPU#0! [<c0104614>] show_trace_log_lvl+0x1a/0x30 [<c01052c9>] show_trace+0x12/0x14 [<c0105355>] dump_stack+0x16/0x18 [<c01467a0>] softlockup_tick+0x81/0xa8 [<c011e4dc>] run_local_timers+0x12/0x14 [<c011e8dd>] update_process_times+0x2b/0x63 [<c012e4be>] tick_sched_timer+0x4d/0x9e [<c012af00>] hrtimer_interrupt+0x12e/0x1a6 [<c0106f56>] timer_interrupt+0xe/0x15 [<c0146af3>] handle_IRQ_event+0x28/0x59 [<c01480a7>] handle_level_irq+0x6e/0xe7 [<c0105d3e>] do_IRQ+0x3d/0x7f [<c01041b2>] common_interrupt+0x2e/0x34 [<c011afef>] do_softirq+0x4d/0x50 [<c011b263>] irq_exit+0x7e/0x80
Quoted 8 lines
Quoted 8 lines
[<c0105d43>] do_IRQ+0x42/0x7f [<c01041b2>] common_interrupt+0x2e/0x34 [<c0178bf2>] core_sys_select+0x1c6/0x310 [<c0179101>] sys_select+0x39/0x18f [<c0103f44>] sysenter_past_esp+0x5d/0x99 ======================= Clocksource tsc unstable (delta = 9372804176 ns) Time: acpi_pm clocksource has been installed.
Hmm.. No clue right off. Does booting w/ clocksource=acpi_pm avoid the issue?
-john
Hello,
Quoted 29 lines
Quoted 20 lines
Quoted 20 lines
2) This was found a couple minutes later when the system was really busy and close to oom condition.
INFO: lockdep is turned off.
BUG: soft lockup detected on CPU#0! [<c0104614>] show_trace_log_lvl+0x1a/0x30 [<c01052c9>] show_trace+0x12/0x14 [<c0105355>] dump_stack+0x16/0x18 [<c01467a0>] softlockup_tick+0x81/0xa8 [<c011e4dc>] run_local_timers+0x12/0x14 [<c011e8dd>] update_process_times+0x2b/0x63 [<c012e4be>] tick_sched_timer+0x4d/0x9e [<c012af00>] hrtimer_interrupt+0x12e/0x1a6 [<c0106f56>] timer_interrupt+0xe/0x15 [<c0146af3>] handle_IRQ_event+0x28/0x59 [<c01480a7>] handle_level_irq+0x6e/0xe7 [<c0105d3e>] do_IRQ+0x3d/0x7f [<c01041b2>] common_interrupt+0x2e/0x34 [<c011afef>] do_softirq+0x4d/0x50 [<c011b263>] irq_exit+0x7e/0x80Quoted 8 lines
Quoted 8 lines
[<c0105d43>] do_IRQ+0x42/0x7f [<c01041b2>] common_interrupt+0x2e/0x34 [<c0178bf2>] core_sys_select+0x1c6/0x310 [<c0179101>] sys_select+0x39/0x18f [<c0103f44>] sysenter_past_esp+0x5d/0x99 ======================= Clocksource tsc unstable (delta = 9372804176 ns) Time: acpi_pm clocksource has been installed.
Quoted 2 lines
Hmm.. No clue right off. Does booting w/ clocksource=acpi_pm avoid the issue?
Sorry. Can't reproduce it either way.
Mariusz
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 8 lines · On Thu, 29 Mar 2007 16:32:19 -0400 "Ryan Hope" <[email protected]> wrote:
I was not able to boot 2.6.21-rc3-mm* so I can not tell if this problem exists in that series but with 2.6.21-rc4-mm* and 2.6.21-rc5-mm* I can not get into Xorg. I disabled frame buffer support but when X loads normally the display goes blank for a moment then the greeter gets started but with the mentioned kernels the screen just stays blank. Everyting worked fine in 2.6.21-rc2-mm* no I am not sure where the problem is. I am using the fglrx display driver for X if that help anyone.
hm, don't know, sorry.
Are you able to get control back so you can see if there's anything interesting in the kernel logs? Maybe ssh in from another machine?
It's conceivable that reverting fix-sysfs-reclaim-crash.patch will fix it, or applying the below.
If that doesn't help, or of you don't have the time to try it, please be sure to test the next -mm kernels, let us know if the bug is still there?
It could of course be that the memory management changes in -mm broke the fglrx driver.
Begin forwarded message:
Date: Wed, 28 Mar 2007 23:38:16 -0600
From: [email protected] (Eric W. Biederman)
To: Linus Torvalds <[email protected]>
Cc: Andrew Morton <[email protected]>, Sid Boyce <[email protected]>, Adrian Bunk <[email protected]>, <[email protected]>
Subject: [PATCH] pid: Properly detect orphaned process groups in exit_notify
In commit 0475ac0845f9295bc5f69af45f58dff2c104c8d1 when converting the converting the orphaned process group handling to use struct pid I made a small mistake. I accidentally replaced an == with a !=.
Besides just being a dumb thing to do apparently this has a bad side effect. The improper orphaned process group detection causes kwin to die after a suspend/resume cycle.
I'm amazed this patch has been around as long as it has without anyone else noticing something funny going on.
And the following people deserve credit for spotting and helping to reproduce this.
Thanks to: Sid Boyce <[email protected]>
Thanks to: "Michael Wu"
---
kernel/exit.c +1 -1
@@ -790,7 +790,7 @@ static void exit_notify(struct task_struct *tsk) pgrp =task_pgrp (tsk);if ((task_pgrp (t) != pgrp) && - (task_session (t) !=task_session (tsk)) && + (task_session (t) ==task_session (tsk)) &&will_become_orphaned_pgrp (pgrp, tsk) &&has_stopped_jobs (pgrp)) {__kill_pgrp_info (SIGHUP ,SEND_SIG_PRIV , pgrp);