wondershaper and dmzs
I have a pretty simple setup. I've got a linux nat box, with some internal hosts. I've also got some servers in a dmz. It looks something like this:
Internet
|
(external network)
| |
| |
linux dmz
nat hosts
|
|
(office network)
|
|
office
hosts I'd like to shape the office traffic that's going out to the internet, while leaving the office traffic to the dmz alone. After all, the network link the dmz fast. I've been using wondershaper, since it's easy and works well, but I'm not sure how to add in an exception for the dmz hosts.
Can I do this with tc, or is the entire interface shaped? It seems like I might be able to create a more explicate filter, but I'm having trouble getting it to work.
seph
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Quoted 4 lines · seph
Can I do this with tc, or is the entire interface shaped? It seems like I might be able to create a more explicate filter, but I'm having trouble getting it to work.
You can filter on the destination ip address.
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc