updated Sibyte headers

index 42d4cf0..c0d5206 100644
@@ -157,6 +157,7 @@ #define K_BCM1480_INT_GPIO_15           
  * Mask values for each interrupt
  */
 
+#define _BCM1480_INT_MASK(w,n)              _SB_MAKEMASK(w,((n) & 0x3F))
 #define _BCM1480_INT_MASK1(n)               _SB_MAKEMASK1(((n) & 0x3F))
 #define _BCM1480_INT_OFFSET(n)              (((n) & 0x40) << 6)
 

@@ -195,6 +196,7 @@ #define M_BCM1480_INT_PMI_LOW           
 #define M_BCM1480_INT_PMI_HIGH              _BCM1480_INT_MASK1(K_BCM1480_INT_PMI_HIGH)
 #define M_BCM1480_INT_PMO_LOW               _BCM1480_INT_MASK1(K_BCM1480_INT_PMO_LOW)
 #define M_BCM1480_INT_PMO_HIGH              _BCM1480_INT_MASK1(K_BCM1480_INT_PMO_HIGH)
+#define M_BCM1480_INT_MBOX_ALL              _BCM1480_INT_MASK(8,K_BCM1480_INT_MBOX_0_0)
 #define M_BCM1480_INT_MBOX_0_0              _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_0)
 #define M_BCM1480_INT_MBOX_0_1              _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_1)
 #define M_BCM1480_INT_MBOX_0_2              _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_2)

index 886b099..35c6721 100644
@@ -1,21 +1,21 @@
 /*  *********************************************************************
     *  BCM1280/BCM1480 Board Support Package
-    *
+    *  
     *  L2 Cache constants and macros		File: bcm1480_l2c.h
-    *
+    *  
     *  This module contains constants useful for manipulating the
     *  level 2 cache.
-    *
+    *  
     *  BCM1400 specification level:  1280-UM100-D2 (11/14/03)
-    *
-    *********************************************************************
+    *  
+    *********************************************************************  
     *
     *  Copyright 2000,2001,2002,2003
     *  Broadcom Corporation. All rights reserved.
-    *
-    *  This program is free software; you can redistribute it and/or
-    *  modify it under the terms of the GNU General Public License as
-    *  published by the Free Software Foundation; either version 2 of
+    *  
+    *  This program is free software; you can redistribute it and/or 
+    *  modify it under the terms of the GNU General Public License as 
+    *  published by the Free Software Foundation; either version 2 of 
     *  the License, or (at your option) any later version.
     *
     *  This program is distributed in the hope that it will be useful,

@@ -25,7 +25,7 @@
     *
     *  You should have received a copy of the GNU General Public License
     *  along with this program; if not, write to the Free Software
-    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
     *  MA 02111-1307 USA
     ********************************************************************* */
 

index 6bdc941..a6a4374 100644
@@ -382,6 +382,10 @@ #define M_BCM1480_MC_CS5                
 #define M_BCM1480_MC_CS6                    _SB_MAKEMASK1(10)
 #define M_BCM1480_MC_CS7                    _SB_MAKEMASK1(11)
 
+#define M_BCM1480_MC_CS                  _SB_MAKEMASK(8,S_BCM1480_MC_CS0)
+#define V_BCM1480_MC_CS(x)               _SB_MAKEVALUE(x,S_BCM1480_MC_CS0)
+#define G_BCM1480_MC_CS(x)               _SB_GETVALUE(x,S_BCM1480_MC_CS0,M_BCM1480_MC_CS0)
+
 #define M_BCM1480_MC_CMD_ACTIVE             _SB_MAKEMASK1(16)
 
 /*

@@ -412,6 +416,8 @@ #if SIBYTE_HDR_FEATURE(1480, PASS2)
 #define K_BCM1480_MC_DRAM_TYPE_DDR2	    2
 #endif
 
+#define K_BCM1480_MC_DRAM_TYPE_DDR2_PASS1   0
+
 #define V_BCM1480_MC_DRAM_TYPE_JEDEC        V_BCM1480_MC_DRAM_TYPE(K_BCM1480_MC_DRAM_TYPE_JEDEC)
 #define V_BCM1480_MC_DRAM_TYPE_FCRAM        V_BCM1480_MC_DRAM_TYPE(K_BCM1480_MC_DRAM_TYPE_FCRAM)
 

@@ -511,6 +517,22 @@ #define M_BCM1480_MC_WR_ODT6_CS4	    _SB
 #define M_BCM1480_MC_WR_ODT6_CS6	    _SB_MAKEMASK1(31)
 
 #define M_BCM1480_MC_CS_ODD_ODT_EN	    _SB_MAKEMASK1(32)
+
+#define S_BCM1480_MC_ODT0	            0
+#define M_BCM1480_MC_ODT0		    _SB_MAKEMASK(8,S_BCM1480_MC_ODT0)
+#define V_BCM1480_MC_ODT0(x)		    _SB_MAKEVALUE(x,S_BCM1480_MC_ODT0)
+
+#define S_BCM1480_MC_ODT2	            8
+#define M_BCM1480_MC_ODT2		    _SB_MAKEMASK(8,S_BCM1480_MC_ODT2)
+#define V_BCM1480_MC_ODT2(x)		    _SB_MAKEVALUE(x,S_BCM1480_MC_ODT2)
+
+#define S_BCM1480_MC_ODT4	            16
+#define M_BCM1480_MC_ODT4		    _SB_MAKEMASK(8,S_BCM1480_MC_ODT4)
+#define V_BCM1480_MC_ODT4(x)		    _SB_MAKEVALUE(x,S_BCM1480_MC_ODT4)
+
+#define S_BCM1480_MC_ODT6	            24
+#define M_BCM1480_MC_ODT6		    _SB_MAKEMASK(8,S_BCM1480_MC_ODT6)
+#define V_BCM1480_MC_ODT6(x)		    _SB_MAKEVALUE(x,S_BCM1480_MC_ODT6)
 #endif
 
 /*

@@ -588,11 +610,11 @@ #define	M_BCM1480_MC_DLL_REGBYPASS      
 #define	M_BCM1480_MC_DQO_SHIFT            _SB_MAKEMASK1(47)
 #endif
 
-#define S_BCM1480_MC_DLL_DEFAULT            48
-#define M_BCM1480_MC_DLL_DEFAULT            _SB_MAKEMASK(6,S_BCM1480_MC_DLL_DEFAULT)
-#define V_BCM1480_MC_DLL_DEFAULT(x)         _SB_MAKEVALUE(x,S_BCM1480_MC_DLL_DEFAULT)
-#define G_BCM1480_MC_DLL_DEFAULT(x)         _SB_GETVALUE(x,S_BCM1480_MC_DLL_DEFAULT,M_BCM1480_MC_DLL_DEFAULT)
-#define V_BCM1480_MC_DLL_DEFAULT_DEFAULT    V_BCM1480_MC_DLL_DEFAULT(0x10)
+#define S_BCM1480_MC_DLL_DEFAULT           48
+#define M_BCM1480_MC_DLL_DEFAULT           _SB_MAKEMASK(6,S_BCM1480_MC_DLL_DEFAULT)
+#define V_BCM1480_MC_DLL_DEFAULT(x)        _SB_MAKEVALUE(x,S_BCM1480_MC_DLL_DEFAULT)
+#define G_BCM1480_MC_DLL_DEFAULT(x)        _SB_GETVALUE(x,S_BCM1480_MC_DLL_DEFAULT,M_BCM1480_MC_DLL_DEFAULT)
+#define V_BCM1480_MC_DLL_DEFAULT_DEFAULT   V_BCM1480_MC_DLL_DEFAULT(0x10)
 
 #if SIBYTE_HDR_FEATURE(1480, PASS2)
 #define S_BCM1480_MC_DLL_REGCTRL	  54

index c2dd2fe..bda391d 100644
@@ -230,6 +230,7 @@ #define R_BCM1480_DUART_ISRREG(chan)	   
 
 #define A_BCM1480_DUART_IMRREG(chan)	    (A_BCM1480_DUART(chan) + R_BCM1480_DUART_IMRREG(chan))
 #define A_BCM1480_DUART_ISRREG(chan)	    (A_BCM1480_DUART(chan) + R_BCM1480_DUART_ISRREG(chan))
+#define A_BCM1480_DUART_IN_PORT(chan)       (A_BCM1480_DUART(chan) + R_DUART_INP_ORT)
 
 /*
  * These constants are the absolute addresses.

@@ -404,6 +405,21 @@ #define A_BCM1480_IMR_ALIAS_MAILBOX_REGI
 #define R_BCM1480_IMR_ALIAS_MAILBOX_0           0x0000		/* 0x0x0 */
 #define R_BCM1480_IMR_ALIAS_MAILBOX_0_SET       0x0008		/* 0x0x8 */
 
+/*
+ * these macros work together to build the address of a mailbox
+ * register, e.g., A_BCM1480_MAILBOX_REGISTER(0,R_BCM1480_IMR_MAILBOX_SET,2)
+ * for mbox_0_set_cpu2 returns 0x00100240C8
+ */
+#define R_BCM1480_IMR_MAILBOX_CPU         0x00
+#define R_BCM1480_IMR_MAILBOX_SET         0x08
+#define R_BCM1480_IMR_MAILBOX_CLR         0x10
+#define R_BCM1480_IMR_MAILBOX_NUM_SPACING 0x20
+#define A_BCM1480_MAILBOX_REGISTER(num,reg,cpu) \
+    (A_BCM1480_IMR_CPU0_BASE + \
+     (num * R_BCM1480_IMR_MAILBOX_NUM_SPACING) + \
+     (cpu * BCM1480_IMR_REGISTER_SPACING) + \
+     (R_BCM1480_IMR_MAILBOX_0_CPU + reg))
+
 /*  *********************************************************************
     * System Performance Counter Registers (Section 4.7)
     ********************************************************************* */

@@ -428,6 +444,10 @@ #define A_BCM1480_SCD_PERF_CNT_5        
 #define A_BCM1480_SCD_PERF_CNT_6            0x0010020500
 #define A_BCM1480_SCD_PERF_CNT_7            0x0010020508
 
+#define BCM1480_SCD_NUM_PERF_CNT 8
+#define BCM1480_SCD_PERF_CNT_SPACING 8
+#define A_BCM1480_SCD_PERF_CNT(n) (A_SCD_PERF_CNT_0+(n*BCM1480_SCD_PERF_CNT_SPACING))
+
 /*  *********************************************************************
     * System Bus Watcher Registers (Section 4.8)
     ********************************************************************* */

176 lines not on this page · raw message

index 3dfe29e..73bce90 100644
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation
+ * Copyright (C) 2000,2001,2002,2003,2004 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License

@@ -19,8 +19,8 @@
 #ifndef _SIBYTE_BOARD_H
 #define _SIBYTE_BOARD_H
 
-
 #if defined(CONFIG_SIBYTE_SWARM) || defined(CONFIG_SIBYTE_PTSWARM) || \
+    defined(CONFIG_SIBYTE_PT1120) || defined(CONFIG_SIBYTE_PT1125) || \
     defined(CONFIG_SIBYTE_CRHONE) || defined(CONFIG_SIBYTE_CRHINE) || \
     defined(CONFIG_SIBYTE_LITTLESUR)
 #include <asm/sibyte/swarm.h>

@@ -55,6 +55,16 @@ #else
 #define setleds(t0,t1,c0,c1,c2,c3)
 #endif /* LEDS_PHYS */
 
+#else
+
+void swarm_setup(void);
+
+#ifdef LEDS_PHYS
+extern void setleds(char *str);
+#else
+#define setleds(s) do { } while (0)
+#endif /* LEDS_PHYS */
+
 #endif /* __ASSEMBLY__ */
 
 #endif /* _SIBYTE_BOARD_H */

index 57c53e6..e691b6d 100644
@@ -18,18 +18,17 @@
 #ifndef __ASM_SIBYTE_CARMEL_H
 #define __ASM_SIBYTE_CARMEL_H
 
-
 #include <asm/sibyte/sb1250.h>
 #include <asm/sibyte/sb1250_int.h>
 
 #define SIBYTE_BOARD_NAME "Carmel"
 
-#define GPIO_PHY_INTERRUPT      2
-#define GPIO_NONMASKABLE_INT    3
-#define GPIO_CF_INSERTED        6
-#define GPIO_MONTEREY_RESET     7
-#define GPIO_QUADUART_INT       8
-#define GPIO_CF_INT             9
+#define GPIO_PHY_INTERRUPT      2 
+#define GPIO_NONMASKABLE_INT    3 
+#define GPIO_CF_INSERTED        6 
+#define GPIO_MONTEREY_RESET     7 
+#define GPIO_QUADUART_INT       8 
+#define GPIO_CF_INT             9 
 #define GPIO_FPGA_CCLK          10
 #define GPIO_FPGA_DOUT          11
 #define GPIO_FPGA_DIN           12

index e6145f5..8c8892c 100644
@@ -1,23 +1,23 @@
 /*  *********************************************************************
     *  SB1250 Board Support Package
-    *
+    *  
     *  DMA definitions				File: sb1250_dma.h
-    *
+    *  
     *  This module contains constants and macros useful for
     *  programming the SB1250's DMA controllers, both the data mover
     *  and the Ethernet DMA.
-    *
+    *  
     *  SB1250 specification level:  User's manual 10/21/02
     *  BCM1280 specification level: User's manual 11/24/03
-    *
-    *********************************************************************
+    *  
+    *********************************************************************  
     *
     *  Copyright 2000,2001,2002,2003
     *  Broadcom Corporation. All rights reserved.
-    *
-    *  This program is free software; you can redistribute it and/or
-    *  modify it under the terms of the GNU General Public License as
-    *  published by the Free Software Foundation; either version 2 of
+    *  
+    *  This program is free software; you can redistribute it and/or 
+    *  modify it under the terms of the GNU General Public License as 
+    *  published by the Free Software Foundation; either version 2 of 
     *  the License, or (at your option) any later version.
     *
     *  This program is distributed in the hope that it will be useful,

@@ -27,7 +27,7 @@
     *
     *  You should have received a copy of the GNU General Public License
     *  along with this program; if not, write to the Free Software
-    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
     *  MA 02111-1307 USA
     ********************************************************************* */
 

@@ -42,9 +42,9 @@ #include "sb1250_defs.h"
     *  DMA Registers
     ********************************************************************* */
 
-/*
+/* 
  * Ethernet and Serial DMA Configuration Register 0  (Table 7-4)
- * Registers: DMA_CONFIG0_MAC_x_RX_CH_0
+ * Registers: DMA_CONFIG0_MAC_x_RX_CH_0 
  * Registers: DMA_CONFIG0_MAC_x_TX_CH_0
  * Registers: DMA_CONFIG0_SER_x_RX
  * Registers: DMA_CONFIG0_SER_x_TX

@@ -97,7 +97,7 @@ #define G_DMA_LOW_WATERMARK(x)      _SB_
 
 /*
  * Ethernet and Serial DMA Configuration Register 1 (Table 7-5)
- * Registers: DMA_CONFIG1_MAC_x_RX_CH_0
+ * Registers: DMA_CONFIG1_MAC_x_RX_CH_0 
  * Registers: DMA_CONFIG1_DMA_x_TX_CH_0
  * Registers: DMA_CONFIG1_SER_x_RX
  * Registers: DMA_CONFIG1_SER_x_TX

@@ -151,11 +151,11 @@ #define M_DMA_ASIC_BASE_MBZ         _SB_
 /*
  * DMA Descriptor Count Registers (Table 7-8)
  */
-
+ 
 /* No bitfields */
 
 
-/*
+/* 
  * Current Descriptor Address Register (Table 7-11)
  */
 

@@ -274,7 +274,7 @@ #define M_DMA_DSCRB_STATUS          _SB_
 #define V_DMA_DSCRB_STATUS(x)       _SB_MAKEVALUE(x,S_DMA_DSCRB_STATUS)
 #define G_DMA_DSCRB_STATUS(x)       _SB_GETVALUE(x,S_DMA_DSCRB_STATUS,M_DMA_DSCRB_STATUS)
 
-/*
+/* 
  * Ethernet Descriptor Status Bits (Table 7-15)
  */
 

@@ -324,7 +324,7 @@ #define M_DMA_ETHRX_SOP             _SB_
 
 #define M_DMA_ETHTX_SOP	    	    _SB_MAKEMASK1(63)
 
-/*
+/* 
  * Ethernet Transmit Options (Table 7-17)
  */
 

@@ -377,7 +377,7 @@ #define K_DMA_SERTX_ABORT           _SB_
     *  Data Mover Registers
     ********************************************************************* */
 
-/*
+/* 
  * Data Mover Descriptor Base Address Register (Table 7-22)
  * Register: DM_DSCR_BASE_0
  * Register: DM_DSCR_BASE_1

@@ -414,7 +414,7 @@ #define M_DM_DSCR_BASE_ERROR        _SB_
 #define M_DM_DSCR_BASE_ABORT        _SB_MAKEMASK1(62)
 #define M_DM_DSCR_BASE_ENABL        _SB_MAKEMASK1(63)
 
-/*
+/* 
  * Data Mover Descriptor Count Register (Table 7-25)
  */
 

index 1b5cbc5..9a83b3f 100644
@@ -1,22 +1,22 @@
 /*  *********************************************************************
     *  SB1250 Board Support Package
-    *
+    *  
     *  Generic Bus Constants                     File: sb1250_genbus.h
-    *
-    *  This module contains constants and macros useful for
+    *  
+    *  This module contains constants and macros useful for 
     *  manipulating the SB1250's Generic Bus interface
-    *
+    *  
     *  SB1250 specification level:  User's manual 10/21/02
     *  BCM1280 specification level: User's Manual 11/14/03
-    *
-    *********************************************************************
+    *  
+    *********************************************************************  
     *
     *  Copyright 2000,2001,2002,2003
     *  Broadcom Corporation. All rights reserved.
-    *
-    *  This program is free software; you can redistribute it and/or
-    *  modify it under the terms of the GNU General Public License as
-    *  published by the Free Software Foundation; either version 2 of
+    *  
+    *  This program is free software; you can redistribute it and/or 
+    *  modify it under the terms of the GNU General Public License as 
+    *  published by the Free Software Foundation; either version 2 of 
     *  the License, or (at your option) any later version.
     *
     *  This program is distributed in the hope that it will be useful,

@@ -26,7 +26,7 @@
     *
     *  You should have received a copy of the GNU General Public License
     *  along with this program; if not, write to the Free Software
-    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
     *  MA 02111-1307 USA
     ********************************************************************* */
 

@@ -416,7 +416,7 @@ #define G_GPIO_INTR_TYPE14(x)	_SB_GETVAL
 #if SIBYTE_HDR_FEATURE_CHIP(1480)
 
 /*
- * GPIO Interrupt Additional Type Register
+ * GPIO Interrupt Additional Type Register 
  */
 
 #define K_GPIO_INTR_BOTHEDGE	0

index 05c7b39..94e8299 100644
@@ -45,8 +45,6 @@ #include "sb1250_defs.h"
  * First, the interrupt numbers.
  */
 
-#if SIBYTE_HDR_FEATURE_1250_112x
-
 #define K_INT_SOURCES               64
 
 #define K_INT_WATCHDOG_TIMER_0      0

@@ -152,6 +150,7 @@ #define M_INT_MBOX_0                _SB_
 #define M_INT_MBOX_1                _SB_MAKEMASK1(K_INT_MBOX_1)
 #define M_INT_MBOX_2                _SB_MAKEMASK1(K_INT_MBOX_2)
 #define M_INT_MBOX_3                _SB_MAKEMASK1(K_INT_MBOX_3)
+#define M_INT_MBOX_ALL              _SB_MAKEMASK(4,K_INT_MBOX_0)
 #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
 #define M_INT_CYCLE_CP0_INT	    _SB_MAKEMASK1(K_INT_CYCLE_CP0_INT)
 #define M_INT_CYCLE_CP1_INT	    _SB_MAKEMASK1(K_INT_CYCLE_CP1_INT)

@@ -247,5 +246,3 @@ #define M_LDTVECT_RAISEMBOX             
 
 
 #endif	/* 1250/112x */
-
-#endif

index 842f205..5667d9e 100644
@@ -1,21 +1,21 @@
 /*  *********************************************************************
     *  SB1250 Board Support Package
-    *
+    *  
     *  L2 Cache constants and macros		File: sb1250_l2c.h
-    *
+    *  
     *  This module contains constants useful for manipulating the
     *  level 2 cache.
-    *
+    *  
     *  SB1250 specification level:  User's manual 1/02/02
-    *
-    *********************************************************************
+    *  
+    *********************************************************************  
     *
     *  Copyright 2000,2001,2002,2003
     *  Broadcom Corporation. All rights reserved.
-    *
-    *  This program is free software; you can redistribute it and/or
-    *  modify it under the terms of the GNU General Public License as
-    *  published by the Free Software Foundation; either version 2 of
+    *  
+    *  This program is free software; you can redistribute it and/or 
+    *  modify it under the terms of the GNU General Public License as 
+    *  published by the Free Software Foundation; either version 2 of 
     *  the License, or (at your option) any later version.
     *
     *  This program is distributed in the hope that it will be useful,

@@ -25,7 +25,7 @@
     *
     *  You should have received a copy of the GNU General Public License
     *  along with this program; if not, write to the Free Software
-    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
     *  MA 02111-1307 USA
     ********************************************************************* */
 

index 7092535..d0626d9 100644
@@ -1,21 +1,21 @@
 /*  *********************************************************************
     *  SB1250 Board Support Package
-    *
+    *  
     *  LDT constants				File: sb1250_ldt.h
-    *
-    *  This module contains constants and macros to describe
-    *  the LDT interface on the SB1250.
-    *
+    *  
+    *  This module contains constants and macros to describe 
+    *  the LDT interface on the SB1250.  
+    *  
     *  SB1250 specification level:  User's manual 1/02/02
-    *
-    *********************************************************************
+    *  
+    *********************************************************************  
     *
     *  Copyright 2000,2001,2002,2003
     *  Broadcom Corporation. All rights reserved.
-    *
-    *  This program is free software; you can redistribute it and/or
-    *  modify it under the terms of the GNU General Public License as
-    *  published by the Free Software Foundation; either version 2 of
+    *  
+    *  This program is free software; you can redistribute it and/or 
+    *  modify it under the terms of the GNU General Public License as 
+    *  published by the Free Software Foundation; either version 2 of 
     *  the License, or (at your option) any later version.
     *
     *  This program is distributed in the hope that it will be useful,

@@ -25,7 +25,7 @@
     *
     *  You should have received a copy of the GNU General Public License
     *  along with this program; if not, write to the Free Software
-    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
     *  MA 02111-1307 USA
     ********************************************************************* */
 

@@ -153,7 +153,7 @@ #define G_LDT_DEVHDR_BIST(x)		_SB_GETVAL
 
 /*
  * LDT Status Register (Table 8-14).  Note that these constants
- * assume you've read the command and status register
+ * assume you've read the command and status register 
  * together (32-bit read at offset 0x04)
  *
  * These bits also apply to the secondary status

@@ -181,8 +181,8 @@ #define M_LDT_STATUS_SIGDSERR		_SB_MAKEM
 #define M_LDT_STATUS_DETPARERR		_SB_MAKEMASK1_32(31)
 
 /*
- * Bridge Control Register (Table 8-16).  Note that these
- * constants assume you've read the register as a 32-bit
+ * Bridge Control Register (Table 8-16).  Note that these 
+ * constants assume you've read the register as a 32-bit 
  * read (offset 0x3C)
  */
 

123 lines not on this page · raw message

index 26e4214..20bfb31 100644
@@ -1,21 +1,21 @@
 /*  *********************************************************************
     *  SB1250 Board Support Package
-    *
-    *  Memory Controller constants              File: sb1250_mc.h
-    *
+    *  
+    *  Memory Controller constants              File: sb1250_mc.h       
+    *  
     *  This module contains constants and macros useful for
     *  programming the memory controller.
-    *
+    *  
     *  SB1250 specification level:  User's manual 1/02/02
-    *
-    *********************************************************************
+    *  
+    *********************************************************************  
     *
     *  Copyright 2000,2001,2002,2003
     *  Broadcom Corporation. All rights reserved.
-    *
-    *  This program is free software; you can redistribute it and/or
-    *  modify it under the terms of the GNU General Public License as
-    *  published by the Free Software Foundation; either version 2 of
+    *  
+    *  This program is free software; you can redistribute it and/or 
+    *  modify it under the terms of the GNU General Public License as 
+    *  published by the Free Software Foundation; either version 2 of 
     *  the License, or (at your option) any later version.
     *
     *  This program is distributed in the hope that it will be useful,

@@ -25,7 +25,7 @@
     *
     *  You should have received a copy of the GNU General Public License
     *  along with this program; if not, write to the Free Software
-    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
     *  MA 02111-1307 USA
     ********************************************************************* */
 

@@ -164,7 +164,7 @@ #define G_MC_REF_RATE(x)             _SB
 
 #define K_MC_REF_RATE_100MHz         0x62
 #define K_MC_REF_RATE_133MHz         0x81
-#define K_MC_REF_RATE_200MHz         0xC4
+#define K_MC_REF_RATE_200MHz         0xC4 
 
 #define V_MC_REF_RATE_100MHz         V_MC_REF_RATE(K_MC_REF_RATE_100MHz)
 #define V_MC_REF_RATE_133MHz         V_MC_REF_RATE(K_MC_REF_RATE_133MHz)

@@ -226,7 +226,7 @@ #define V_MC_CLKCONFIG_DEFAULT       V_M
                                      V_MC_ADDR_DRIVE_DEFAULT | \
                                      V_MC_DATA_DRIVE_DEFAULT | \
                                      V_MC_CLOCK_DRIVE_DEFAULT | \
-                                     V_MC_REF_RATE_DEFAULT
+                                     V_MC_REF_RATE_DEFAULT 
 
 
 

@@ -295,7 +295,7 @@ #define M_MC_EXTERNALDECODE	    _SB_MAKE
 
 #if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
 #define M_MC_PRE_ON_A8              _SB_MAKEMASK1(36)
-#define M_MC_RAM_WITH_A13           _SB_MAKEMASK1(38)
+#define M_MC_RAM_WITH_A13           _SB_MAKEMASK1(37)
 #endif /* 1250 PASS3 || 112x PASS1 */
 
 

120 lines not on this page · raw message

148 lines not on this page · raw message

index 279a912..e95636e 100644
@@ -1,22 +1,22 @@
 /*  *********************************************************************
     *  SB1250 Board Support Package
-    *
+    *  
     *  SMBUS Constants                          File: sb1250_smbus.h
-    *
-    *  This module contains constants and macros useful for
+    *  
+    *  This module contains constants and macros useful for 
     *  manipulating the SB1250's SMbus devices.
-    *
+    *  
     *  SB1250 specification level:  10/21/02
     *  BCM1280 specification level:  11/24/03
-    *
-    *********************************************************************
+    *  
+    *********************************************************************  
     *
     *  Copyright 2000,2001,2002,2003
     *  Broadcom Corporation. All rights reserved.
-    *
-    *  This program is free software; you can redistribute it and/or
-    *  modify it under the terms of the GNU General Public License as
-    *  published by the Free Software Foundation; either version 2 of
+    *  
+    *  This program is free software; you can redistribute it and/or 
+    *  modify it under the terms of the GNU General Public License as 
+    *  published by the Free Software Foundation; either version 2 of 
     *  the License, or (at your option) any later version.
     *
     *  This program is distributed in the hope that it will be useful,

@@ -26,7 +26,7 @@
     *
     *  You should have received a copy of the GNU General Public License
     *  along with this program; if not, write to the Free Software
-    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
     *  MA 02111-1307 USA
     ********************************************************************* */
 

index dd154ac..6a1d554 100644
@@ -7,15 +7,15 @@
     *  manipulating the SB1250's Synchronous Serial
     *
     *  SB1250 specification level:  User's manual 1/02/02
-    *
+    *  
     *********************************************************************
     *
     *  Copyright 2000,2001,2002,2003
     *  Broadcom Corporation. All rights reserved.
-    *
-    *  This program is free software; you can redistribute it and/or
-    *  modify it under the terms of the GNU General Public License as
-    *  published by the Free Software Foundation; either version 2 of
+    *  
+    *  This program is free software; you can redistribute it and/or 
+    *  modify it under the terms of the GNU General Public License as 
+    *  published by the Free Software Foundation; either version 2 of 
     *  the License, or (at your option) any later version.
     *
     *  This program is distributed in the hope that it will be useful,

@@ -25,7 +25,7 @@
     *
     *  You should have received a copy of the GNU General Public License
     *  along with this program; if not, write to the Free Software
-    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
     *  MA 02111-1307 USA
     ********************************************************************* */
 

index e87045e..a2cea2a 100644
@@ -1,21 +1,21 @@
 /*  *********************************************************************
     *  SB1250 Board Support Package
-    *
+    *  
     *  UART Constants				File: sb1250_uart.h
-    *
-    *  This module contains constants and macros useful for
+    *  
+    *  This module contains constants and macros useful for 
     *  manipulating the SB1250's UARTs
     *
     *  SB1250 specification level:  User's manual 1/02/02
-    *
-    *********************************************************************
+    *  
+    *********************************************************************  
     *
     *  Copyright 2000,2001,2002,2003
     *  Broadcom Corporation. All rights reserved.
-    *
-    *  This program is free software; you can redistribute it and/or
-    *  modify it under the terms of the GNU General Public License as
-    *  published by the Free Software Foundation; either version 2 of
+    *  
+    *  This program is free software; you can redistribute it and/or 
+    *  modify it under the terms of the GNU General Public License as 
+    *  published by the Free Software Foundation; either version 2 of 
     *  the License, or (at your option) any later version.
     *
     *  This program is distributed in the hope that it will be useful,

@@ -25,7 +25,7 @@
     *
     *  You should have received a copy of the GNU General Public License
     *  along with this program; if not, write to the Free Software
-    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
     *  MA 02111-1307 USA
     ********************************************************************* */
 

@@ -35,7 +35,7 @@ #define _SB1250_UART_H
 
 #include "sb1250_defs.h"
 
-/* **********************************************************************
+/* ********************************************************************** 
    * DUART Registers
    ********************************************************************** */
 

@@ -143,7 +143,7 @@ #define V_DUART_MISC_CMD_RESET_BREAK_INT
 #define V_DUART_MISC_CMD_START_BREAK     V_DUART_MISC_CMD(K_DUART_MISC_CMD_START_BREAK)
 #define V_DUART_MISC_CMD_STOP_BREAK      V_DUART_MISC_CMD(K_DUART_MISC_CMD_STOP_BREAK)
 
-#define M_DUART_CMD_RESERVED             _SB_MAKEMASK1(7)
+#define M_DUART_CMD_RESERVED             _SB_MAKEMASK1(7) 
 
 /*
  * DUART Status Register (Table 10-6)

@@ -163,7 +163,7 @@ #define M_DUART_RCVD_BRK            _SB_
 
 /*
  * DUART Baud Rate Register (Table 10-7)
- * Register: DUART_CLK_SEL_A
+ * Register: DUART_CLK_SEL_A 
  * Register: DUART_CLK_SEL_B
  */
 

@@ -335,7 +335,7 @@ #define M_DUART_OUT_PIN_CLR(chan) \
     (chan == 0 ? M_DUART_OUT_PIN_CLR0 : M_DUART_OUT_PIN_CLR1)
 
 #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
-/*
+/* 
  * Full Interrupt Control Register
  */
 

index 86db37e..540865f 100644
@@ -32,6 +32,18 @@ #define SIBYTE_HAVE_PCMCIA 1
 #define SIBYTE_HAVE_IDE    1
 #define SIBYTE_DEFAULT_CONSOLE "ttyS0,115200"
 #endif
+#ifdef CONFIG_SIBYTE_PT1120
+#define SIBYTE_BOARD_NAME "PT1120"
+#define SIBYTE_HAVE_PCMCIA 1
+#define SIBYTE_HAVE_IDE    1
+#define SIBYTE_DEFAULT_CONSOLE "ttyS0,115200"
+#endif
+#ifdef CONFIG_SIBYTE_PT1125
+#define SIBYTE_BOARD_NAME "PT1125"
+#define SIBYTE_HAVE_PCMCIA 1
+#define SIBYTE_HAVE_IDE    1
+#define SIBYTE_DEFAULT_CONSOLE "ttyS0,115200"
+#endif
 #ifdef CONFIG_SIBYTE_LITTLESUR
 #define SIBYTE_BOARD_NAME "BCM91250C2 (LittleSur)"
 #define SIBYTE_HAVE_PCMCIA 0