Skip to contentSkip to conversation

AIC79xx: scsi0: device overrun (status a)

DISCUSSION Wakko Warner 1 participant 1 message Apr 6, 2007

lore
Share & tools
lore
#0 lore raw

Can anyone tell me what this means:

Apr  5 22:11:56 vegeta kernel: [ 1265.267700] scsi0: device overrun (status a) on 0:1:0

Kernel is 2.6.20.

I setup a raid1 between 2 hard disks (on partition #2), as soon as it started to sync the array, my log was flooded with the above entry.

The scsi adapter is an onboard controller on a supermicro x5da8. The hard disks are SEAGATE ST318404LW drives on channel 0 (no other devices on this channel).

Quoted 1 line

From what I can tell, the speed of the sync is going fairly quickly.

~29mb/sec

This is really strange to me, since I dd'd from the first disk to the second with out any messages in the log (It was an older kernel, 2.6.17)

If there's any other information needed, ask. I'm not sure what else is needed.

Signature · 2 lines
 Lab tests show that use of micro$oft causes cancer in lab animals
 Got Gas???