the scheduled removal of the i8xx_tco watchdog driver
Subsystems (2)
PATCH 1/1 the scheduled removal of the i8xx_tco watchdog driver
This patch contains the scheduled removal of the i8xx_tco watchdog driver.
---
Documentation/feature-removal-schedule.txt | 8 MAINTAINERS | 6 drivers/char/watchdog/Kconfig | 22 drivers/char/watchdog/Makefile | 1 drivers/char/watchdog/i8xx_tco.c | 571 --------------------- drivers/char/watchdog/i8xx_tco.h | 42 - 6 files changed, 650 deletions(-)
Documentation/feature-removal-schedule.txt renamed from Documentation/feature-removal-schedule.txt.old +0 -8
@@ -235,14 +235,6 @@ Who: Richard Purdie <[email protected]> --------------------------- -What: i8xx_tco watchdog driver -When: in 2.6.22 -Why: the i8xx_tco watchdog driver has been replaced by the iTCO_wdt - watchdog driver. -Who: Wim Van Sebroeck <[email protected]> - ---------------------------- - What: i2c-rpx driver When: June 2007 Why: Broken. It depends on i2c-algo-8xx which has never been in the
MAINTAINERS renamed from MAINTAINERS.old +0 -6
@@ -1690,12 +1690,6 @@ P: H. Peter Anvin M: [email protected] S: Maintained -i810 TCO TIMER WATCHDOG -P: Nils Faerber -M: [email protected] -W: http://www.kernelconcepts.de/ -S: Maintained - IA64 (Itanium) PLATFORM P: Tony Luck M: [email protected]
drivers/char/watchdog/Kconfig renamed from drivers/char/watchdog/Kconfig.old +0 -22
@@ -298,28 +298,6 @@ config I6300ESB_WDT To compile this driver as a module, choose M here: the module will be called i6300esb. -config I8XX_TCO - tristate "Intel i8xx TCO Timer/Watchdog" - depends on WATCHDOG && (X86 || IA64) && PCI - default n - ---help--- - Hardware driver for the TCO timer built into the Intel 82801 - I/O Controller Hub family. The TCO (Total Cost of Ownership) - timer is a watchdog timer that will reboot the machine after - its second expiration. The expiration time can be configured - with the "heartbeat" parameter. - - On some motherboards the driver may fail to reset the chipset's - NO_REBOOT flag which prevents the watchdog from rebooting the - machine. If this is the case you will get a kernel message like - "failed to reset NO_REBOOT flag, reboot disabled by hardware". - - To compile this driver as a module, choose M here: the - module will be called i8xx_tco. - - Note: This driver will be removed in the near future. Please - use the Intel TCO Timer/Watchdog driver. - config ITCO_WDT tristate "Intel TCO Timer/Watchdog" depends on WATCHDOG && (X86 || IA64) && PCI
drivers/char/watchdog/Makefile renamed from drivers/char/watchdog/Makefile.old +0 -1
@@ -46,7 +46,6 @@ obj-$(CONFIG_IB700_WDT) += ib700wdt.o obj-$(CONFIG_IBMASR) += ibmasr.o obj-$(CONFIG_WAFER_WDT) += wafer5823wdt.o obj-$(CONFIG_I6300ESB_WDT) += i6300esb.o -obj-$(CONFIG_I8XX_TCO) += i8xx_tco.o obj-$(CONFIG_ITCO_WDT) += iTCO_wdt.o iTCO_vendor_support.o obj-$(CONFIG_SC1200_WDT) += sc1200wdt.o obj-$(CONFIG_SCx200_WDT) += scx200_wdt.o
drivers/char/watchdog/i8xx_tco.h deleted +0 -42
42 lines not on this page · raw message
drivers/char/watchdog/i8xx_tco.c deleted +0 -571
571 lines not on this page · raw message
Hello Adrian,
Quoted 4 lines
This patch contains the scheduled removal of the
i8xx_tcowatchdog driver.Signed-off-by Adrian Bunk <[email protected]>
Signed-off-by me also.
We probably also need to remove some stuff in the Documentation/watchdog files.
Greetings,
Wim.
Quoted 10 lines · Wim Van Sebroeck
Hello Adrian,
Quoted 4 lines
This patch contains the scheduled removal of the
i8xx_tcowatchdog driver.Signed-off-by Adrian Bunk <[email protected]>Signed-off-by me also.
We probably also need to remove some stuff in the
Documentation/watchdogfiles.
I might be blind, but I'm not seeing what should be removed.
Quoted 2 lines
Greetings,
Wim.
cu
Adrian
Signature · 4 lines
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon SeedHi Adrian,
Quoted 1 line
I might be blind, but I'm not seeing what should be removed.
[wim@infomag linux-2.6]$ grep -i tco Documentation/watchdog/* Documentation/watchdog/watchdog-api.txt:i810-tco.c -- Intel 810 chipset Documentation/watchdog/watchdog.txt:The i810 TCO watchdog modules can be configured with the "i810_margin" Documentation/watchdog/watchdog.txt:The i810 TCO watchdog driver also implements the WDIOC_GETSTATUS and Documentation/watchdog/watchdog.txt:and WDIOC_GETBOOTSTATUS returns the value of TCO2 Status Register (see Intel'sDocumentation/watchdog/watchdog.txt: WDT501P WDT500P Software Berkshire i810 TCO SA1100WD
But I need to clean this up anyway. So no real need to put this in the same patch yet. I'll create a new patch for this that deals with the complete watchdog Documentation.
Greetings,
Wim.