Skip to contentSkip to conversation

parallel port problems with 2.6.21_rc5 and 2.6.21_rc6_git3-20070410174235

DISCUSSION Markus Koßmann 3 participants 6 messages Apr 11, 2007 – May 14, 2007

lore
Share & tools
lore
#0 lore raw

When using either the unpatched 2.6.21_rc5 or SUSEs patched
2.6.21_rc6_git3-20070410174235 on a SUSE-10.2 x86_64 system the parallel port doesn't work right. If I "cat some_asciifile >/dev/lp0" the output on my Epson Stylus Color 880 is unreadable. "cat /dev/zero >/dev/lp0" creates random characters on the paper. Printing using cups also doesn't work any more.
Switching back to SUSEs 2.6.18.8-0.1 kernel fixes the problem. Any Ideas, what might be broken here ?

#1 lore raw
Quoted 8 lines · On Wed, 11 Apr 2007 20:40:23 +0200 Markus Koßmann wrote:

When using either the unpatched 2.6.21_rc5 or SUSEs patched
2.6.21_rc6_git3-20070410174235 on a SUSE-10.2 x86_64 system the parallel port doesn't work right. If I "cat some_asciifile >/dev/lp0" the output on my Epson Stylus Color 880 is unreadable. "cat /dev/zero >/dev/lp0" creates random characters on the paper. Printing using cups also doesn't work any more.
Switching back to SUSEs 2.6.18.8-0.1 kernel fixes the problem. Any Ideas, what might be broken here ?

Nope, but I have the same problem.
I'll dig into it some day, but it's not very high priority for me.

I haven't tested it lately. Do you still see this problem?

---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***

#2 lore raw

Am Donnerstag, 3. Mai 2007 schrieb Randy Dunlap:

Quoted 10 lines · On Wed, 11 Apr 2007 20:40:23 +0200 Markus Koßmann wrote:
Quoted 8 lines

When using either the unpatched 2.6.21_rc5 or SUSEs patched
2.6.21_rc6_git3-20070410174235 on a SUSE-10.2 x86_64 system the parallel port doesn't work right. If I "cat some_asciifile >/dev/lp0" the output on my Epson Stylus Color 880 is unreadable. "cat /dev/zero >/dev/lp0" creates random characters on the paper. Printing using cups also doesn't work any more.
Switching back to SUSEs 2.6.18.8-0.1 kernel fixes the problem. Any Ideas, what might be broken here ?

Quoted 5 lines

Nope, but I have the same problem.
I'll dig into it some day, but it's not very high priority for me.

I haven't tested it lately. Do you still see this problem?

Yes, it still exists with SUSEs 2.6.21-20070502152652 kernel. Didn't check with vanilla 2.6.21 yet.

#3 lore raw
Quoted 11 lines · On Sat, 5 May 2007 16:58:22 +0200 Markus Koßmann wrote:

Am Donnerstag, 3. Mai 2007 schrieb Randy Dunlap:

Quoted 10 lines · On Wed, 11 Apr 2007 20:40:23 +0200 Markus Koßmann wrote:
Quoted 8 lines

When using either the unpatched 2.6.21_rc5 or SUSEs patched
2.6.21_rc6_git3-20070410174235 on a SUSE-10.2 x86_64 system the parallel port doesn't work right. If I "cat some_asciifile >/dev/lp0" the output on my Epson Stylus Color 880 is unreadable. "cat /dev/zero >/dev/lp0" creates random characters on the paper. Printing using cups also doesn't work any more.
Switching back to SUSEs 2.6.18.8-0.1 kernel fixes the problem. Any Ideas, what might be broken here ?

Quoted 7 lines
Quoted 5 lines

Nope, but I have the same problem.
I'll dig into it some day, but it's not very high priority for me.

I haven't tested it lately. Do you still see this problem?

Yes, it still exists with SUSEs 2.6.21-20070502152652 kernel. Didn't check with vanilla 2.6.21 yet.

Hi Markus,

I just retested this on 2.6.21-git12 and didn't have a problem with printing. Can you test on 2.6.22-rc1?

---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***

#4 lore raw

Am Montag, 14. Mai 2007 schrieb Randy Dunlap:

Quoted 17 lines · On Sat, 5 May 2007 16:58:22 +0200 Markus Koßmann wrote:
Quoted 16 lines

Am Donnerstag, 3. Mai 2007 schrieb Randy Dunlap:

Quoted 14 lines · On Wed, 11 Apr 2007 20:40:23 +0200 Markus Koßmann wrote:
Quoted 8 lines

When using either the unpatched 2.6.21_rc5 or SUSEs patched
2.6.21_rc6_git3-20070410174235 on a SUSE-10.2 x86_64 system the parallel port doesn't work right. If I "cat some_asciifile >/dev/lp0"
the output on my Epson Stylus Color 880 is unreadable. "cat
/dev/zero >/dev/lp0" creates random characters on the paper. Printing using cups also doesn't work any more.
Switching back to SUSEs 2.6.18.8-0.1 kernel fixes the problem. Any Ideas, what might be broken here ?

Nope, but I have the same problem.
I'll dig into it some day, but it's not very high priority for me.

I haven't tested it lately. Do you still see this problem?

Quoted 8 lines
Quoted 2 lines

Yes, it still exists with SUSEs 2.6.21-20070502152652 kernel. Didn't check with vanilla 2.6.21 yet.

Hi Markus,

I just retested this on 2.6.21-git12 and didn't have a problem with printing. Can you test on 2.6.22-rc1?

Seems to be fixed in 2.6.22-rc1 but vanilla 2.6.21 was also bad.

#5 lore raw
In reply to Randy Dunlap
Quoted 8 lines · Randy Dunlap
Quoted 2 lines · On Wed, 11 Apr 2007 20:40:23 +0200 Markus Koßmann wrote:

When using either the unpatched 2.6.21_rc5 or SUSEs patched 2.6.21_rc6_git3-20070410174235 on a SUSE-10.2 x86_64 system the parallel port doesn't work right. If I "cat some_asciifile >/dev/lp0" the output on my Epson Stylus Color 880 is unreadable. "cat /dev/zero >/dev/lp0" creates random characters on the paper. Printing using cups also doesn't work any more. Switching back to SUSEs 2.6.18.8-0.1 kernel fixes the problem.
Any Ideas, what might be broken here ?

Nope, but I have the same problem.
I'll dig into it some day, but it's not very high priority for me.

At some point that could be a problem, I have a shared printer on parallel (and replacing a printer for 11x17 work isn't cheap), as well as one PL/IP requirement, which is embedded in industrial machinery not likely to be upgraded.

Non-critical in the sense that I'm sure I can run old kernels for a decade if needed, but hopefully something to be fixed. Since there's no regressions list any more, I guess we will all have to complain about problems individually. :-(

Signature · 3 lines
Bill Davidsen <[email protected]>
  "We have more to fear from the bungling of the incompetent than from
the machinations of the wicked."  - from Slashdot