iptables marks
Hi all!!
I was trying to figure out how iptables marks work. I thought that a packet could just be marked once into a chain (if the packet matchs the criteria, then it the action is applied, and that's all for the packet into this chain), but I was wrong: I did
iptables -t mangle -A INPUT -i eth0 -j MARK --set-mark 7 iptables -t mangle -A INPUT -i eth0 -j MARK --set-mark 8
and then I did `iptables -t mangle -L -x -v' and I got
Chain INPUT (policy ACCEPT 9565560 packets, 4954706655 bytes)
pkts bytes target prot opt in out source destination
45 31630 MARK 0 -- eth0 any anywhere anywhere MARK set 0x7 45 31630 MARK 0 -- eth0 any anywhere anywhere MARK set 0x8
Can someone tell me how can I be sure one packet will just be marked once into the chain?
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Quoted 5 lines
iptables -t mangle -A INPUT -i eth0 -j MARK --set-mark 7 iptables -t mangle -A INPUT -i eth0 -j MARK --set-mark 8
and then I did `iptables -t mangle -L -x -v' and I got
Quoted 7 lines
Chain INPUT (policy ACCEPT 9565560 packets, 4954706655 bytes)
pkts bytes target prot opt in out source destination45 31630 MARK 0 -- eth0 any anywhere anywhere MARK set 0x7 45 31630 MARK 0 -- eth0 any anywhere anywhere MARK set 0x8Can someone tell me how can I be sure one packet will just be marked once into the chain?
I would try the following (untested) rules:
iptables -t mangle -A INPUT -i eth0 -j MARK --set-mark 7 iptables -t mangle -A INPUT -i eth0 -j RETURN iptables -t mangle -A INPUT -i eth0 -j MARK --set-mark 8
I guess you will never get the second mark.
Regards,
Nelson.-
Signature · 6 lines
http://arhuaco.org http://emQbit.com _______________________________________________ LARTC mailing list [email protected] http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc