regression with gammu on 2.6.21-rc7
Hello,
I have a regression with 2.6.21-rc7-g80d74d51.
The utility "gammu" to talk to my mobile does not work anymore. With 2.6.20 gammu runs fine.
Distribution is the latest Debian/testing
Wolfgang
$ gammu --backup backup
Press Ctrl+C to break...
I/O possible
$ uname -a
Linux max 2.6.21-rc7-g80d74d51 #9 SMP Wed Apr 18 21:41:41 CEST 2007 i686 GNU/Linux
$ tail messages
Apr 20 08:04:36 max kernel: ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
Apr 20 08:04:36 max kernel: extern: link up, 100Mbps, full-duplex, lpa 0x45E1
Apr 20 08:04:36 max kernel: intern: setting half-duplex.
Apr 20 08:09:02 max kernel: usb 2-2: USB disconnect, address 3
Apr 20 08:09:02 max kernel: pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0
Apr 20 08:09:02 max kernel: pl2303 2-2:1.0: device disconnected
Apr 20 08:10:24 max kernel: usb 2-2: new full speed USB device using uhci_hcd and address 4
Apr 20 08:10:25 max kernel: usb 2-2: configuration #1 chosen from 1 choice
Apr 20 08:10:25 max kernel: pl2303 2-2:1.0: pl2303 converter detected
Apr 20 08:10:25 max kernel: usb 2-2: pl2303 converter now attached to ttyUSB0
$ strace -o strace.gammu gammu --backup backup
Press Ctrl+C to break...
$ tail strace.gammu
ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, {B0 -opost -isig -icanon -echo ...}) = 0
ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, {B0 -opost -isig -icanon -echo ...}) = 0
ioctl(3, SNDCTL_TMR_START or TCSETS, {B0 -opost -isig -icanon -echo ...}) = 0
ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, {B0 -opost -isig -icanon -echo ...}) = 0
ioctl(3, TIOCMBIC, [TIOCM_DTR]) = 0
ioctl(3, TIOCMBIC, [TIOCM_RTS]) = 0
ioctl(3, TIOCMGET, [0]) = 0
nanosleep({1, 0}, 0) = ? ERESTART_RESTARTBLOCK (To be restarted)
--- SIGIO (I/O possible) @ 0 (0) ---
+++ killed by SIGIO +++
$ grep open strace.gammu
open("/etc/ld.so.cache", O_RDONLY) = 3
open("/usr/lib/libGammu.so.1", O_RDONLY) = 3
open("/lib/tls/libpthread.so.0", O_RDONLY) = 3
open("/usr/lib/libmysqlclient.so.15", O_RDONLY) = 3
open("/usr/lib/libbluetooth.so.2", O_RDONLY) = 3
open("/lib/tls/libc.so.6", O_RDONLY) = 3
open("/lib/tls/libcrypt.so.1", O_RDONLY) = 3
open("/lib/tls/libnsl.so.1", O_RDONLY) = 3
open("/lib/tls/libm.so.6", O_RDONLY) = 3
open("/usr/lib/libz.so.1", O_RDONLY) = 3
open("/home/erig/.gammurc", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/etc/gammurc", O_RDONLY) = 3
open("/usr//gammu_c", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr//gammu_c", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr//gammu_c", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/dev/ttyUSB0", O_RDWR|O_NONBLOCK|O_NOCTTY) = 3Quoted 10 lines · Wolfgang Erig
Hello,
I have a regression with 2.6.21-rc7-g80d74d51.
The utility "gammu" to talk to my mobile does not work anymore. With 2.6.20 gammu runs fine.Distribution is the latest Debian/testing
Wolfgang
Quoted 16 lines
$ gammu --backup backup Press Ctrl+C to break... I/O possible $ uname -a Linux max 2.6.21-rc7-g80d74d51 #9 SMP Wed Apr 18 21:41:41 CEST 2007 i686 GNU/Linux $ tail messages Apr 20 08:04:36 max kernel: ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16 Apr 20 08:04:36 max kernel: extern: link up, 100Mbps, full-duplex, lpa 0x45E1 Apr 20 08:04:36 max kernel: intern: setting half-duplex. Apr 20 08:09:02 max kernel: usb 2-2: USB disconnect, address 3 Apr 20 08:09:02 max kernel: pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0 Apr 20 08:09:02 max kernel: pl2303 2-2:1.0: device disconnected Apr 20 08:10:24 max kernel: usb 2-2: new full speed USB device using uhci_hcd and address 4 Apr 20 08:10:25 max kernel: usb 2-2: configuration #1 chosen from 1 choice Apr 20 08:10:25 max kernel: pl2303 2-2:1.0: pl2303 converter detected Apr 20 08:10:25 max kernel: usb 2-2: pl2303 converter now attached to ttyUSB0
That looks ok, I'm guessing you yanked it out and then back in?
Or is the problem that the device was removed?
thanks,
greg k-h
Hello Greg,
Quoted 7 lines · Greg KH
Quoted 6 lines · Wolfgang Erig
Hello,
I have a regression with 2.6.21-rc7-g80d74d51.
The utility "gammu" to talk to my mobile does not work anymore. With 2.6.20 gammu runs fine.
Quoted 7 lines
Quoted 7 lines
Distribution is the latest Debian/testing
Wolfgang
$ gammu --backup backup Press Ctrl+C to break... I/O possible
the problem is here because gammu stops working. Maybe a problem in gammu, but with 2.6.20 gammu works fine.
Quoted 14 lines
Quoted 5 lines
$ uname -a Linux max 2.6.21-rc7-g80d74d51 #9 SMP Wed Apr 18 21:41:41 CEST 2007 i686 GNU/Linux $ tail messages Apr 20 08:04:36 max kernel: ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16 Apr 20 08:04:36 max kernel: extern: link up, 100Mbps, full-duplex, lpa 0x45E1Quoted 8 lines
Apr 20 08:04:36 max kernel: intern: setting half-duplex. Apr 20 08:09:02 max kernel: usb 2-2: USB disconnect, address 3 Apr 20 08:09:02 max kernel: pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0 Apr 20 08:09:02 max kernel: pl2303 2-2:1.0: device disconnected Apr 20 08:10:24 max kernel: usb 2-2: new full speed USB device using uhci_hcd and address 4 Apr 20 08:10:25 max kernel: usb 2-2: configuration #1 chosen from 1 choice Apr 20 08:10:25 max kernel: pl2303 2-2:1.0: pl2303 converter detected Apr 20 08:10:25 max kernel: usb 2-2: pl2303 converter now attached to ttyUSB0
Quoted 1 line
That looks ok, I'm guessing you yanked it out and then back in?
Yes.
This is included only to see which device is connected.
Quoted 1 line
Or is the problem that the device was removed?
No, no problem with removal.
I see no hint for a problem in the usb-layer.
Thanks,
Wolfgang
Quoted 1 line · Wolfgang Erig
Hello Greg,
Please don't take me out of the cc:, otherwise I might mist this (as I did...)
Quoted 31 lines · Greg KH
Quoted 7 lines · Wolfgang Erig
Quoted 6 lines
Hello,
I have a regression with 2.6.21-rc7-g80d74d51.
The utility "gammu" to talk to my mobile does not work anymore. With 2.6.20 gammu runs fine.Quoted 7 lines
Quoted 7 lines
Distribution is the latest Debian/testing
Wolfgang
$ gammu --backup backup Press Ctrl+C to break... I/O possiblethe problem is here because gammu stops working. Maybe a problem in gammu, but with 2.6.20 gammu works fine.
Quoted 14 lines
Quoted 13 lines
$ uname -a Linux max 2.6.21-rc7-g80d74d51 #9 SMP Wed Apr 18 21:41:41 CEST 2007 i686 GNU/Linux $ tail messages Apr 20 08:04:36 max kernel: ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16 Apr 20 08:04:36 max kernel: extern: link up, 100Mbps, full-duplex, lpa 0x45E1 Apr 20 08:04:36 max kernel: intern: setting half-duplex. Apr 20 08:09:02 max kernel: usb 2-2: USB disconnect, address 3 Apr 20 08:09:02 max kernel: pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0 Apr 20 08:09:02 max kernel: pl2303 2-2:1.0: device disconnected Apr 20 08:10:24 max kernel: usb 2-2: new full speed USB device using uhci_hcd and address 4 Apr 20 08:10:25 max kernel: usb 2-2: configuration #1 chosen from 1 choice Apr 20 08:10:25 max kernel: pl2303 2-2:1.0: pl2303 converter detected Apr 20 08:10:25 max kernel: usb 2-2: pl2303 converter now attached to ttyUSB0
Quoted 6 lines
Quoted 1 line
That looks ok, I'm guessing you yanked it out and then back in?
Yes.
This is included only to see which device is connected.Quoted 1 line
Or is the problem that the device was removed?
No, no problem with removal.
I see no hint for a problem in the usb-layer.
I don't see any problems here.
If you enable debugging in the pl2303 driver, do you get any errors? You can do this by:
modprobe pl2303 debug=1
or if the module is built in or already loaded:
echo 1 > /sys/modules/pl2303/parameters/debug
Also, if you know how to use git, doing a 'git bisect' to try to track down the problem commit would be very helpful.
thanks,
greg k-h
Quoted 2 lines · Greg KH
Also, if you know how to use git, doing a 'git bisect' to try to track down the problem commit would be very helpful.
Has to do with SIGIO, see this blog post:
http://blog.cihar.com/archives/2007/04/24/kernel_2_6_21_hits_gammu/
Ray
Quoted 7 lines · Ray Lee
Quoted 2 lines · Greg KH
Also, if you know how to use git, doing a 'git bisect' to try to track down the problem commit would be very helpful.
Has to do with SIGIO, see this blog post:
http://blog.cihar.com/archives/2007/04/24/kernel_2_6_21_hits_gammu/
Ah, thank you very much, that makes more sense as nothing changed in that usb-serial driver and I was starting to get a bit worried...
thanks,
greg k-h