Fixes for MPC8272
The following changes since commit 14da5f7675bbb427c469e3f45006e027b6e21db9:
Wolfgang Denk (1):
Cleanup compiler warnings, update CHANGELOG
are found in the git repository at:
git://www.denx.de/git/u-boot-mpc82xx.git
Heiko Schocher (1):
[MPC826x] update defines in include/mpc8260.h for the MPC8272 family
include/mpc8260.h | 90 ++++++++++++++++++++++++++++++++++++++++++++++++++++- 1 files changed, 89 insertions(+), 1 deletions(-)
Please help testing this code. If there are no complaints, it will be merged into the master repo in aboutr 3 weeks from now.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, HRB 165235 Munich, CEO: Wolfgang Denk Office: Kirchenstr. 5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "If God had wanted us to use the metric system, Jesus would have had 10 apostles."
[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-nand-flash.git
The following changes since commit 14da5f7675bbb427c469e3f45006e027b6e21db9:
Wolfgang Denk (1):
Cleanup compiler warnings, update CHANGELOG
are found in the git repository at:
git://www.denx.de/git/u-boot-nand-flash.git
Stefan Roese (2):
Remove BOARDLIBS usage completely
Merge with git://www.denx.de/git/u-boot.git
Makefile | 4 +++- board/ixdp425/config.mk | 3 --- board/prodrive/pdnb3/config.mk | 3 --- cpu/ixp/npe/Makefile | 2 +- doc/README.nand | 7 +------ include/configs/delta.h | 1 - include/configs/zylonite.h | 1 - 7 files changed, 5 insertions(+), 16 deletions(-)
[U-Boot-Users] Please pull git://www.denx.de/git/u-boot-testing.git
The following changes since commit 14da5f7675bbb427c469e3f45006e027b6e21db9:
Wolfgang Denk (1):
Cleanup compiler warnings, update CHANGELOG
are found in the git repository at:
git://www.denx.de/git/u-boot-testing.git
Jeffrey Mann (1):
[patch] setenv(...) can delete environmentalvariables
Mike Frysinger (1):
[patch] use unsigned char in smc91111 driver for mac
Sergei Shtylyov (1):
Avoid assigning PCI resources from zero address
Stefan Roese (2):
Merge with git://www.denx.de/git/u-boot.git
Fix file mode
common/cmd_nvedit.c | 5 ++++- drivers/pci_auto.c | 7 ++++++- drivers/smc91111.c | 8 ++++---- 3 files changed, 14 insertions(+), 6 deletions(-)
Wolfgang Denk
Applied[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-nand-flash.git
In reply to Stefan RoeseQuoted 11 lines · In message <[email protected]> you wrote:
The following changes since commit
14da5f7675bbb427c469e3f45006e027b6e21db9:
Wolfgang Denk (1):
Cleanup compiler warnings, update CHANGELOGare found in the git repository at:
git://www.denx.de/git/u-boot-nand-flash.gitStefan Roese (2):
Remove BOARDLIBS usage completely
Merge withgit://www.denx.de/git/u-boot.git
Merged, thanks.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, CEO: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de It would be illogical to kill without reason -- Spock, "Journey to Babel", stardate 3842.4
[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
In reply to Stefan RoeseThe following changes since commit ac4cd59d59c9bf3f89cb7a344abf8184d678f562:
Timur Tabi (1):
5xxx: write MAC address to mac-address and local-mac-address
are found in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.git
Jeffrey Mann (2):
ppc4xx: Fix CONFIG_SYS_CLK_FREQ definition in Sequoia config file Run new sequoia boards with an EBC speed of 83MHz
Stefan Roese (2):
ppc4xx: Set bd->bi_pci_busfreq on 440EPx/GRx too
ppc4xx: Add mtcpr/mfcpr access macros
board/amcc/sequoia/sequoia.c | 10 ++++++++-- include/configs/sequoia.h | 2 +- include/ppc440.h | 20 +++++++++++++++++--- lib_ppc/board.c | 4 +++- 4 files changed, 29 insertions(+), 7 deletions(-)
[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
The following changes since commit 70124c2602ae2d4c5d3dba05b482d91548242de8:
Stefano Babic (1):
Fix compile problem cause my Microblaze merge
are found in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.git
Jeffrey Mann (2):
ppc4xx: Fix CONFIG_SYS_CLK_FREQ definition in Sequoia config file Run new sequoia boards with an EBC speed of 83MHz
Stefan Roese (9):
ppc4xx: Set bd->bi_pci_busfreq on 440EPx/GRx too
ppc4xx: Add mtcpr/mfcpr access macros
Merge with git://www.denx.de/git/u-boot.git
ppc4xx: Fix problem in 405EZ OCM initialization
ppc4xx: Add 405 support to 4xx NAND driver ndfc.c
ppc4xx: Use do { ... } while (0) for CPR & SDR access macros
ppc4xx: Update AMCC Acadia support for board revision 1.1
ppc4xx: Fix small 405EZ OCM initilization bug in start.S Merge with /home/stefan/git/u-boot/acadia-nand
board/amcc/acadia/acadia.c | 9 ++++++++- board/amcc/sequoia/sequoia.c | 10 ++++++++-- cpu/ppc4xx/ndfc.c | 8 ++++---- cpu/ppc4xx/start.S | 2 +- include/configs/acadia.h | 27 +++++++++------------------ include/configs/sequoia.h | 2 +- include/ppc405.h | 8 ++++---- include/ppc440.h | 20 +++++++++++++++++--- lib_ppc/board.c | 4 +++- 9 files changed, 55 insertions(+), 35 deletions(-)
[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
The following changes since commit 19bf91f9628f80a55d4f171df71041574882b3d6:
Wolfgang Denk (1):
Merge with /home/tur/git/u-boot#motionpro
are found in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.git
Stefan Roese (13):
ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
ppc4xx: Change Luan config file to support ECC
ppc4xx: 44x DDR driver code cleanup and small fix for Bamboo
NAND: Update nand_ecc.c to latest Linux version
NAND: Add hardware ECC support to the PPC4xx NAND driver ndfc.c
ppc4xx: Update in_be32() functions and friends to latest Linux version
ppc4xx: Prepare Bamboo port for NAND booting support
NAND: Add ECC support to NAND booting support in nand_spl/nand_boot.c
ppc4xx: Add NAND booting support for AMCC Bamboo (440EP) eval board
ppc4xx: Update Sequoia NAND booting support with ECC
ppc4xx: Undo Sequoia patch for dynamic EBC speed support of 83MHz Merge with /home/stefan/git/u-boot/bamboo-nand
ppc4xx: Add missing file for Bamboo NAND booting support
MAKEALL | 30 ++-- Makefile | 9 + board/amcc/bamboo/Makefile | 4 +- board/amcc/bamboo/bamboo.c | 29 ++- board/amcc/bamboo/config.mk | 6 +- board/amcc/bamboo/flash.c | 6 +- board/amcc/bamboo/init.S | 183 +++++++++--------- board/amcc/bamboo/u-boot-nand.lds | 137 +++++++++++++ board/amcc/sequoia/sdram.c | 4 + board/amcc/sequoia/sequoia.c | 6 - cpu/ppc4xx/44x_spd_ddr.c | 341 ++++++++++++++++----------------- cpu/ppc4xx/44x_spd_ddr2.c | 7 +- cpu/ppc4xx/ndfc.c | 74 +++++-- cpu/ppc4xx/start.S | 221 +++++++++++++--------- drivers/nand/nand_ecc.c | 228 +++++++++------------- include/asm-ppc/io.h | 89 ++++++---- include/configs/bamboo.h | 88 ++++++++-- include/configs/luan.h | 3 +- include/configs/sequoia.h | 13 +- nand_spl/board/amcc/bamboo/Makefile | 100 ++++++++++ nand_spl/board/amcc/bamboo/config.mk | 49 +++++ nand_spl/board/amcc/bamboo/sdram.c | 92 +++++++++ nand_spl/board/amcc/bamboo/u-boot.lds | 65 +++++++ nand_spl/board/amcc/sequoia/Makefile | 9 +- nand_spl/nand_boot.c | 95 ++++++---- 25 files changed, 1243 insertions(+), 645 deletions(-) create mode 100644 board/amcc/bamboo/u-boot-nand.lds create mode 100644 nand_spl/board/amcc/bamboo/Makefile create mode 100644 nand_spl/board/amcc/bamboo/config.mk create mode 100644 nand_spl/board/amcc/bamboo/sdram.c create mode 100644 nand_spl/board/amcc/bamboo/u-boot.lds
[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
The following changes since commit c0c292b2852a12e9d93e99b3aaf5b0dac5f36fdc:
Wolfgang Denk (1):
Merge with /home/wd/git/u-boot/custodian/u-boot-ppc4xx
are found in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.git
Stefan Roese (2):
ppc4xx: Add NAND booting support for AMCC Acadia (405EZ) eval board Merge with /home/stefan/git/u-boot/acadia-nand-boot
MAKEALL | 33 ++++---- Makefile | 9 ++ board/amcc/acadia/Makefile | 2 +- board/amcc/acadia/acadia.c | 10 ++- board/amcc/acadia/cmd_acadia.c | 101 ++++++++++++++++++++++ board/amcc/acadia/config.mk | 6 ++ board/amcc/acadia/memory.c | 11 ++- board/amcc/acadia/u-boot-nand.lds | 137 +++++++++++++++++++++++++++++ cpu/ppc4xx/start.S | 72 ++++++++++++---- include/configs/acadia.h | 152 ++++++++++++++++++++++++++------- include/ppc405.h | 8 ++ nand_spl/board/amcc/acadia/Makefile | 104 ++++++++++++++++++++++ nand_spl/board/amcc/acadia/config.mk | 47 ++++++++++ nand_spl/board/amcc/acadia/u-boot.lds | 63 ++++++++++++++ 14 files changed, 685 insertions(+), 70 deletions(-) create mode 100644 board/amcc/acadia/cmd_acadia.c create mode 100644 board/amcc/acadia/u-boot-nand.lds create mode 100644 nand_spl/board/amcc/acadia/Makefile create mode 100644 nand_spl/board/amcc/acadia/config.mk create mode 100644 nand_spl/board/amcc/acadia/u-boot.lds
[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
The following changes since commit 725671ccd2cd04c9ebc50c9e5a94dd8cbade66b7:
Wolfgang Denk (1):
Coding Style cleanup; generate new CHANGELOG file.
are available in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.git master
Beno?t Monin (1):
fix gpio setting when using CFG_440_GPIO_TABLE
Grzegorz Bernacki (1):
ppc4xx: Clean up 440 exceptions handling
Stefan Roese (8):
[ppc4xx] Extend program_tlb() with virtual & physical addresses [ppc4xx] Extend 44x GPIO setup with default output state [ppc4xx] Add initial lwmon5 board support
Merge with /home/stefan/git/u-boot/denx-440-exceptions [ppc4xx] Change lwmon5 port to work with recent 440 exception rework [ppc4xx] Change board/amcc/acadia/cpr.c to pll.c [ppc4xx] Fix problem with NAND booting on AMCC Acadia
ppc4xx: Add bootstrap command for AMCC Sequoia (440EPx) eval board
MAINTAINERS | 1 +
MAKEALL | 18 +-
Makefile | 3 +
board/amcc/acadia/Makefile | 2 +-
board/amcc/acadia/acadia.c | 2 +
board/amcc/acadia/memory.c | 11 +
board/amcc/acadia/{cpr.c => pll.c} | 0
board/amcc/sequoia/Makefile | 2 +-
board/amcc/sequoia/cmd_sequoia.c | 111 ++++++
board/lwmon5/Makefile | 51 +++
board/lwmon5/config.mk | 39 +++
board/lwmon5/init.S | 90 +++++
board/lwmon5/lwmon5.c | 464 +++++++++++++++++++++++++
board/lwmon5/sdram.c | 598 +++++++++++++++++++++++++++++++++
board/lwmon5/sdram.h | 505 ++++++++++++++++++++++++++++
board/lwmon5/u-boot.lds | 145 ++++++++
cpu/ppc4xx/44x_spd_ddr.c | 4 +-
cpu/ppc4xx/44x_spd_ddr2.c | 4 +-
cpu/ppc4xx/config.mk | 10 +-
cpu/ppc4xx/gpio.c | 42 +++-
cpu/ppc4xx/start.S | 331 +++++++++---------
cpu/ppc4xx/tlb.c | 77 +++--
cpu/ppc4xx/traps.c | 107 ++++---
include/asm-ppc/gpio.h | 8 +-
include/asm-ppc/processor.h | 15 +-
include/configs/CPCI440.h | 1 +
include/configs/KAREF.h | 1 +
include/configs/METROBOX.h | 1 +
include/configs/acadia.h | 4 +-
include/configs/alpr.h | 1 +
include/configs/bamboo.h | 1 +
include/configs/ebony.h | 1 +
include/configs/katmai.h | 2 +-
include/configs/lwmon5.h | 438 ++++++++++++++++++++++++
include/configs/ocotea.h | 1 +
include/configs/p3p440.h | 1 +
include/configs/pcs440ep.h | 131 ++++----
include/configs/sequoia.h | 1 +
include/configs/taishan.h | 1 +
include/configs/yosemite.h | 1 +
include/ppc405.h | 9 +
include/ppc440.h | 10 +-
include/ppc4xx.h | 1 +
include/ppc_asm.tmpl | 96 +++----
nand_spl/board/amcc/acadia/Makefile | 14 +-
nand_spl/board/amcc/acadia/config.mk | 4 +-
nand_spl/board/amcc/acadia/u-boot.lds | 2 +-
47 files changed, 2968 insertions(+), 394 deletions(-)
rename board/amcc/acadia/{cpr.c => pll.c} (100%)
create mode 100644 board/amcc/sequoia/cmd_sequoia.c
create mode 100644 board/lwmon5/Makefile
create mode 100644 board/lwmon5/config.mk
create mode 100644 board/lwmon5/init.S
create mode 100644 board/lwmon5/lwmon5.c
create mode 100644 board/lwmon5/sdram.c
create mode 100644 board/lwmon5/sdram.h
create mode 100644 board/lwmon5/u-boot.lds
create mode 100644 include/configs/lwmon5.h[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
Quoted 7 lines · In message <[email protected]> you wrote:
The following changes since commit
725671ccd2cd04c9ebc50c9e5a94dd8cbade66b7:
Wolfgang Denk (1):
Coding Style cleanup; generate new CHANGELOG file.are available in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.gitmaster
Merged. Thanks.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Any sufficiently advanced technology is indistinguishable from magic.
- Arthur C. Clarke[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
In reply to Stefan RoeseQuoted 3 lines · On Tue, 19 Jun 2007 17:49:54 +0200 Stefan Roese <[email protected]> wrote:
Grzegorz Bernacki (1):
ppc4xx: Clean up 440 exceptions handling
Emil brought to my attention that this commit breaks all powerpc's except 4xx, like this:
start.S: Assembler messages:
start.S:266: Error: Unrecognized opcode: exception_prolog' start.S:285: Error: Unrecognized opcode: exception_prolog' make[1]: *** [start.o] Error 1
let us know how you would like to proceed.
Kim
[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
Hi Kim,
Quoted 6 lines · Kim Phillips
Quoted 2 lines
Grzegorz Bernacki (1):
ppc4xx: Clean up 440 exceptions handlingEmil brought to my attention that this commit breaks all powerpc's except 4xx, like this:
Quoted 6 lines
start.S: Assembler messages:
start.S:266: Error: Unrecognized opcode:exception_prolog' start.S:285: Error: Unrecognized opcode:exception_prolog' make[1]: *** [start.o] Error 1let us know how you would like to proceed.
I'm very sorry for this. We're investigating right now, how to best handle this. I'll let you know very soon.
Best regards,
Stefan
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
Hi Kim,
Quoted 8 lines · Stefan Roese
Quoted 8 lines
Emil brought to my attention that this commit breaks all powerpc's except 4xx, like this:
start.S: Assembler messages:
start.S:266: Error: Unrecognized opcode:exception_prolog' start.S:285: Error: Unrecognized opcode:exception_prolog' make[1]: *** [start.o] Error 1
Quoted 4 lines
Quoted 1 line
let us know how you would like to proceed.
I'm very sorry for this. We're investigating right now, how to best handle this. I'll let you know very soon.
Wolfgang committed a fix for this a few minutes ago:
Please give it a try and let me know if you have any comments.
Again, sorry for the breakage.
Best regards,
Stefan
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
Quoted 2 lines · On Fri, 22 Jun 2007 16:18:32 +0200 Stefan Roese <[email protected]> wrote:
Please give it a try and let me know if you have any comments.
builds ok now.
Thanks,
Kim
[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
In reply to Stefan RoeseThe following changes since commit 02032e8f14751a1a751b09240a4f1cf9f8a2077f:
Rafal Jaworowski (1):
[ppc] Fix build breakage for all non-4xx PowerPC variants.
are available in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.git master
Stefan Roese (1):
ppc4xx: Fix problem with extended program_tlb() funtion
cpu/ppc4xx/tlb.c | 8 ++++++++ 1 files changed, 8 insertions(+), 0 deletions(-)
PATCH 1/1 ppc7xx: Update CPCI750 board
This small CPCI750 update extends the board specific command "show_config" to display the Marvell strapping registers and extends the PCI IDE controller.
---
commit c9cfe580f6376de734a58707448914c8f7815043
tree 2731456a3e94d72412abe3f5881943dded1dd579
parent 83b4cfa3d629dff0264366263c5e94d9a50ad80b
author Reinhard Arlt <[email protected]> Fri, 22 Jun 2007 17:28:42 +0200 committer Stefan Roese <[email protected]> Fri, 22 Jun 2007 17:28:42 +0200
board/esd/cpci750/cpci750.c | 89 ++++++++++++++++++++++++++++++++++++++-- board/esd/cpci750/ide.c | 2 + board/esd/cpci750/sdram_init.c | 2 - 3 files changed, 88 insertions(+), 5 deletions(-)
board/esd/cpci750/cpci750.c +85 -4
@@ -55,6 +55,71 @@#define DP (x)#endif +static char show_config_tab[][15 ] = {{"PCI0DLL_2 " },/* 31 */ + {"PCI0DLL_1 " },/* 30 */ + {"PCI0DLL_0 " },/* 29 */ + {"PCI1DLL_2 " },/* 28 */ + {"PCI1DLL_1 " },/* 27 */ + {"PCI1DLL_0 " },/* 26 */ + {"BbEP2En " },/* 25 */ + {"SDRAMRdDataDel" },/* 24 */ + {"SDRAMRdDel " },/* 23 */ + {"SDRAMSync " },/* 22 */ + {"SDRAMPipeSel_1" },/* 21 */ + {"SDRAMPipeSel_0" },/* 20 */ + {"SDRAMAddDel " },/* 19 */ + {"SDRAMClkSel " },/* 18 */ + {"Reserved(1!) " },/* 17 */ + {"PCIRty " },/* 16 */ + {"BootCSWidth_1 " },/* 15 */ + {"BootCSWidth_0 " },/* 14 */ + {"PCI1PadsCal " },/* 13 */ + {"PCI0PadsCal " },/* 12 */ + {"MultiMVId_1 " },/* 11 */ + {"MultiMVId_0 " },/* 10 */ + {"MultiGTEn " },/* 09 */ + {"Int60xArb " },/* 08 */ + {"CPUBusConfig_1" },/* 07 */ + {"CPUBusConfig_0" },/* 06 */ + {"DefIntSpc " },/* 05 */ + {0 },/* 04 */ + {"SROMAdd_1 " },/* 03 */ + {"SROMAdd_0 " },/* 02 */ + {"DRAMPadCal " },/* 01 */ + {"SInitEn " },/* 00 */ + {0 },/* 31 */ + {0 },/* 30 */ + {0 },/* 29 */ + {0 },/* 28 */ + {0 },/* 27 */ + {0 },/* 26 */ + {0 },/* 25 */ + {0 },/* 24 */ + {0 },/* 23 */ + {0 },/* 22 */ + {"JTAGCalBy " },/* 21 */ + {"GB2Sel " },/* 20 */ + {"GB1Sel " },/* 19 */ + {"DRAMPLL_MDiv_5" },/* 18 */ + {"DRAMPLL_MDiv_4" },/* 17 */ + {"DRAMPLL_MDiv_3" },/* 16 */ + {"DRAMPLL_MDiv_2" },/* 15 */ + {"DRAMPLL_MDiv_1" },/* 14 */ + {"DRAMPLL_MDiv_0" },/* 13 */ + {"GB0Sel " },/* 12 */ + {"DRAMPLLPU " },/* 11 */ + {"DRAMPLL_HIKVCO" },/* 10 */ + {"DRAMPLLNP " },/* 09 */ + {"DRAMPLL_NDiv_7" },/* 08 */ + {"DRAMPLL_NDiv_6" },/* 07 */ + {"CPUPadCal " },/* 06 */ + {"DRAMPLL_NDiv_5" },/* 05 */ + {"DRAMPLL_NDiv_4" },/* 04 */ + {"DRAMPLL_NDiv_3" },/* 03 */ + {"DRAMPLL_NDiv_2" },/* 02 */ + {"DRAMPLL_NDiv_1" },/* 01 */ + {"DRAMPLL_NDiv_0" }};/* 00 */ +extern void flush_data_cache (void );extern void invalidate_l1_instruction_cache (void );extern flash_info_t flash_info[];
@@ -901,21 +966,37 @@ void board_prebootm_init ()dcache_disable (); } - -int do_show_cfg (cmd_tbl_t * cmdtp,int flag,int argc,char *argv[]) +int do_show_config (cmd_tbl_t * cmdtp,int flag,int argc,char *argv[]) {unsigned int reset_sample_low;unsigned int reset_sample_high; +unsigned int l, l1, l2;GT_REG_READ (0x3c4 , &reset_sample_low);GT_REG_READ (0x3d4 , &reset_sample_high);printf ("Reset configuration 0x%08x 0x%08x\n" , reset_sample_low, reset_sample_high); + l2 =0 ; +for (l=0 ; l<63 ; l++) { +if (show_config_tab[l][0 ] !=0 ) { +printf ("%14s:%1x " , show_config_tab[l], + ((reset_sample_low >> (31 - (l &0x1f )))) &0x01 ); + l2++; +if ((l2 %4 ) ==0 ) +printf ("\n" ); + }else { + l1++; + } +if (l ==32 ) + reset_sample_low = reset_sample_high; + } +printf ("\n" ); +return (0 ); }U_BOOT_CMD ( - show_cfg,1 ,1 , do_show_cfg, -"show_cfg- Show Marvell strapping register\n" , + show_config,1 ,1 , do_show_config, +"show_config - Show Marvell strapping register\n" ,"Show Marvell strapping register (ResetSampleLow ResetSampleHigh)\n" );
board/esd/cpci750/ide.c +2 -0
@@ -43,6 +43,8 @@ int ide_preinit (void) ide_bus_offset[l] = -ATA_STATUS ; } devbusfn =pci_find_device (0x1103 ,0x0004 ,0 ); +if (devbusfn ==-1 ) + devbusfn =pci_find_device (0x1095 ,0x3114 ,0 );if (devbusfn !=-1 ) { status =0 ;
board/esd/cpci750/sdram_init.c +1 -1
@@ -1252,7 +1252,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)/* sets up the GT properly with information passed in */ int setup_sdram (AUX_MEM_DIMM_INFO * info) { -ulong tmp, check; +ulong tmp;ulong tmp_sdram_mode =0 ;/* 0x141c */ ulong tmp_dunit_control_low =0 ;/* 0x1404 */ int i;
Wolfgang Denk
AppliedPATCH 1/1 ppc7xx: Update CPCI750 board
Quoted 6 lines · In message <[email protected]> you wrote:
This small CPCI750 update extends the board specific command "
show_config" to display the Marvell strapping registers and extends the PCI IDE controller.Signed-off-by Reinhard Arlt <[email protected]>Signed-off-by Stefan Roese <[email protected]>
Applied. Thanks.
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "I'm not a god, I was misquoted." - Lister, Red Dwarf
[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
In reply to Stefan RoeseThe following changes since commit 53629f439cc9daba166812749d2cf3102aca7aac:
Stefan Roese (1):
Merge with git://www.denx.de/git/u-boot.git
are available in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.git
Anatolij Gustschin (1):
ppc4xx: lwmon5: Update Lime initialization
Eugene OBrien (1):
ppc4xx: Update AMCC Bamboo 440EP support
Grzegorz Bernacki (1):
[ppc440SPe] Graceful recovery from machine check during PCIe configuration
Matthias Fuchs (1):
new FPGA image for PLU405 board
Pavel Kolesnikov (1):
POST: Add ECC POST for the lwmon5 board
Rafal Jaworowski (1):
[ppc4xx] Separate settings for PCIe bus numbering on 440SPe rev.A
Stefan Roese (13):
ppc4xx: Change receive buffer handling in the 4xx emac driver
ppc4xx: Add remove_tlb() function to remove a mem area from TLB setup
ppc4xx: Add new weak functions to support boardspecific DDR2 configuration
ppc4xx: Support for Yucca board with 440SPe Rev A added to 44x_spd_ddr2.c
ppc4xx: AMCC Luan uses the new boardspecific DDR2 controller setup
ppc4xx: Code cleanup
Merge with git://www.denx.de/git/u-boot.git
ppc4xx: Fix bug with default GPIO output value
ppc4xx: Fix lwmon5 interrupt controller setup (polarity, trigger...)
ppc4xx: lwmon5: Support for 128 MByte NOR FLASH added
ppc4xx: Only print ECC related info when the error bis are set
ppc4xx: Update 440EPx lwmon5 board support
ppc4xx: Code cleanup
CHANGELOG | 59 + MAKEALL | 12 +- Makefile | 10 +- board/amcc/bamboo/bamboo.c | 321 ++++-- board/amcc/bamboo/init.S | 3 +- board/amcc/bamboo/u-boot.lds | 2 - board/amcc/common/flash.c | 18 +- board/amcc/luan/luan.c | 7 + board/amcc/yucca/yucca.c | 34 + board/esd/plu405/fpgadata.c | 2339 +++++++++++++++++++------------------ board/lwmon5/lwmon5.c | 89 ++- board/lwmon5/sdram.c | 38 +- cpu/ppc4xx/440spe_pcie.c | 47 +- cpu/ppc4xx/440spe_pcie.h | 19 +- cpu/ppc4xx/44x_spd_ddr.c | 5 +- cpu/ppc4xx/44x_spd_ddr2.c | 58 +- cpu/ppc4xx/4xx_enet.c | 8 +- cpu/ppc4xx/gpio.c | 4 +- cpu/ppc4xx/tlb.c | 62 +- cpu/ppc4xx/traps.c | 49 +- include/asm-ppc/mmu.h | 3 + include/common.h | 8 +- include/configs/bamboo.h | 2 + include/configs/luan.h | 1 - include/configs/lwmon5.h | 33 +- include/post.h | 1 + include/ppc440.h | 13 + lib_ppc/extable.c | 2 +- post/board/lwmon5/Makefile | 29 + post/board/lwmon5/ecc.c | 267 +++++ post/cpu/ppc4xx/fpu.c | 2 +- post/post.c | 8 +- post/tests.c | 13 + 64 files changed, 3950 insertions(+), 1670 deletions(-) create mode 100644 post/board/lwmon5/Makefile create mode 100644 post/board/lwmon5/ecc.c
[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
The following changes since commit 53629f439cc9daba166812749d2cf3102aca7aac:
Stefan Roese (1):
Merge with git://www.denx.de/git/u-boot.git
are available in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.git
Anatolij Gustschin (1):
ppc4xx: lwmon5: Update Lime initialization
Eugene OBrien (1):
ppc4xx: Update AMCC Bamboo 440EP support
Grzegorz Bernacki (1):
[ppc440SPe] Graceful recovery from machine check during PCIe configuration
John Otken (1):
ppc4xx: Add support for AMCC 405EP Taihu board
Matthias Fuchs (1):
new FPGA image for PLU405 board
Niklaus Giger (8):
Add PPC4xx-HCU4 and HCU5 boards: Infrastructure Add PPC4xx-HCU4 and HCU5 boards: READMEs Add PPC4xx-HCU4 and HCU5 boards: HCU4 config Add PPC4xx-HCU4 and HCU5 boards: HCU5 config Add PPC4xx-HCU4 and HCU5 boards: make related Add PPC4xx-HCU4 and HCU5 boards: common files Add PPC4xx-HCU4 and HCU5 boards: HCU4 files Add PPC4xx-HCU4 and HCU5 boards: HCU5 files
Pavel Kolesnikov (1):
POST: Add ECC POST for the lwmon5 board
Rafal Jaworowski (2):
[ppc4xx] Separate settings for PCIe bus numbering on 440SPe rev.A
Stefan Roese (24):
ppc4xx: Change receive buffer handling in the 4xx emac driver
ppc4xx: Add remove_tlb() function to remove a mem area from TLB setup
ppc4xx: Add new weak functions to support boardspecific DDR2 configuration
ppc4xx: Support for Yucca board with 440SPe Rev A added to 44x_spd_ddr2.c
ppc4xx: AMCC Luan uses the new boardspecific DDR2 controller setup
ppc4xx: Code cleanup
Merge with git://www.denx.de/git/u-boot.git
ppc4xx: Fix bug with default GPIO output value
ppc4xx: Fix lwmon5 interrupt controller setup (polarity, trigger...)
ppc4xx: lwmon5: Support for 128 MByte NOR FLASH added
ppc4xx: Only print ECC related info when the error bis are set
ppc4xx: Update 440EPx lwmon5 board support
ppc4xx: Code cleanup
Merge with git://www.denx.de/git/u-boot.git
ppc4xx: Update AMCC Bamboo README doc/README.bamboo
ppc4xx: Update lwmon5 POST configuration
Coding style cleanup
ppc4xx: Fix problem in PLL clock calculation
POST: Add ppc405 support to cache and UART POST
POST: Add option for external ethernet loopback test
ppc4xx: Add initial Zeus (PPC405EP) board support
Merge with /home/stefan/git/u-boot/zeus
Coding style cleanup
POST: Fix merge problem
Yuri Tikhonov (1):
POST: Add ppc4xx UART POST support without external uart clock (lwmon5)
CHANGELOG | 59 + CREDITS | 5 + MAINTAINERS | 7 + MAKEALL | 33 +- Makefile | 26 +- board/amcc/bamboo/bamboo.c | 321 ++++-- board/amcc/bamboo/init.S | 3 +- board/amcc/bamboo/u-boot.lds | 2 - board/amcc/bubinga/bubinga.c | 13 +- board/amcc/common/flash.c | 18 +- board/amcc/luan/luan.c | 7 + board/amcc/taihu/Makefile | 49 + board/amcc/taihu/config.mk | 24 + board/amcc/taihu/flash.c | 1083 +++++++++++++++++ board/amcc/taihu/lcd.c | 257 ++++ board/amcc/taihu/taihu.c | 240 ++++ board/amcc/taihu/u-boot.lds | 150 +++ board/amcc/taihu/update.c | 132 +++ board/amcc/yucca/yucca.c | 34 + board/esd/plu405/fpgadata.c | 2339 +++++++++++++++++++------------------ board/lwmon5/lwmon5.c | 89 ++- board/lwmon5/sdram.c | 38 +- board/netstal/common/flash.c | 528 +++++++++ board/netstal/common/nm_bsp.c | 41 + board/netstal/hcu4/Makefile | 49 + board/netstal/hcu4/README.txt | 59 + board/netstal/hcu4/config.mk | 28 + board/netstal/hcu4/hcu4.c | 403 +++++++ board/netstal/hcu4/u-boot.lds | 140 +++ board/netstal/hcu5/Makefile | 49 + board/netstal/hcu5/README.txt | 174 +++ board/netstal/hcu5/config.mk | 30 + board/netstal/hcu5/hcu5.c | 525 +++++++++ board/netstal/hcu5/init.S | 79 ++ board/netstal/hcu5/sdram.c | 302 +++++ board/netstal/hcu5/u-boot.lds | 144 +++ board/zeus/Makefile | 51 + board/zeus/config.mk | 24 + board/zeus/u-boot.lds | 133 +++ board/zeus/update.c | 105 ++ board/zeus/zeus.c | 511 ++++++++ common/soft_spi.c | 2 + cpu/ppc4xx/440spe_pcie.c | 47 +- cpu/ppc4xx/440spe_pcie.h | 19 +- cpu/ppc4xx/44x_spd_ddr.c | 5 +- cpu/ppc4xx/44x_spd_ddr2.c | 58 +- cpu/ppc4xx/4xx_enet.c | 8 +- cpu/ppc4xx/gpio.c | 6 +- cpu/ppc4xx/sdram.c | 32 +- cpu/ppc4xx/sdram.h | 2 - cpu/ppc4xx/serial.c | 9 +- cpu/ppc4xx/speed.c | 33 +- cpu/ppc4xx/start.S | 61 +- cpu/ppc4xx/tlb.c | 62 +- cpu/ppc4xx/traps.c | 49 +- doc/README.bamboo | 62 + doc/README.zeus | 73 ++ dtt/Makefile | 2 +- dtt/ds1775.c | 156 +++ include/asm-ppc/mmu.h | 3 + include/asm-ppc/processor.h | 6 + include/common.h | 8 +- include/configs/bamboo.h | 2 + include/configs/hcu4.h | 341 ++++++ include/configs/hcu5.h | 388 ++++++ include/configs/luan.h | 1 - include/configs/lwmon5.h | 50 +- include/configs/taihu.h | 473 ++++++++ include/configs/zeus.h | 375 ++++++ include/dtt.h | 8 + include/post.h | 1 + include/ppc405.h | 16 + include/ppc440.h | 13 + include/ppc_asm.tmpl | 2 +- lib_ppc/extable.c | 2 +- net/eth.c | 14 +- post/board/lwmon5/Makefile | 29 + post/board/lwmon5/ecc.c | 267 +++++ post/cpu/ppc4xx/cache.c | 16 +- post/cpu/ppc4xx/cache_4xx.S | 44 + post/cpu/ppc4xx/ether.c | 9 +- post/cpu/ppc4xx/fpu.c | 2 +- post/cpu/ppc4xx/uart.c | 176 +++- post/post.c | 8 +- post/tests.c | 13 + 115 files changed, 11556 insertions(+), 1741 deletions(-) create mode 100644 board/amcc/taihu/Makefile create mode 100644 board/amcc/taihu/config.mk create mode 100644 board/amcc/taihu/flash.c create mode 100644 board/amcc/taihu/lcd.c create mode 100644 board/amcc/taihu/taihu.c create mode 100644 board/amcc/taihu/u-boot.lds create mode 100644 board/amcc/taihu/update.c create mode 100644 board/netstal/common/flash.c create mode 100644 board/netstal/common/nm_bsp.c create mode 100644 board/netstal/hcu4/Makefile create mode 100644 board/netstal/hcu4/README.txt create mode 100644 board/netstal/hcu4/config.mk create mode 100644 board/netstal/hcu4/hcu4.c create mode 100644 board/netstal/hcu4/u-boot.lds create mode 100644 board/netstal/hcu5/Makefile create mode 100644 board/netstal/hcu5/README.txt create mode 100644 board/netstal/hcu5/config.mk create mode 100644 board/netstal/hcu5/hcu5.c create mode 100644 board/netstal/hcu5/init.S create mode 100644 board/netstal/hcu5/sdram.c create mode 100644 board/netstal/hcu5/u-boot.lds create mode 100644 board/zeus/Makefile create mode 100644 board/zeus/config.mk create mode 100644 board/zeus/u-boot.lds create mode 100644 board/zeus/update.c create mode 100644 board/zeus/zeus.c create mode 100644 doc/README.zeus create mode 100644 dtt/ds1775.c create mode 100644 include/configs/hcu4.h create mode 100644 include/configs/hcu5.h create mode 100644 include/configs/taihu.h create mode 100644 include/configs/zeus.h create mode 100644 post/board/lwmon5/Makefile create mode 100644 post/board/lwmon5/ecc.c
[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
Quoted 7 lines · In message <[email protected]> you wrote:
The following changes since commit
53629f439cc9daba166812749d2cf3102aca7aac:
Stefan Roese (1):
Merge withgit://www.denx.de/git/u-boot.gitare available in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.git
Done. Thanks.
Best regards,
Wolfgang Denk
Signature · 7 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "Logic and practical information do not seem to apply here." "You admit that?" "To deny the facts would be illogical, Doctor" -- Spock and McCoy, "A Piece of the Action", stardate unknown
[U-Boot-Users] [NAND] Please pull git://www.denx.de/git/u-boot-nand-flash.git
In reply to Stefan RoeseThe following changes since commit 461f2274f8d5e15a354ff92648f17c7b2aa76faa:
Stefan Roese (1):
Merge with git://www.denx.de/git/u-boot.git
are available in the git repository at:
git://www.denx.de/git/u-boot-nand-flash.git
Matthias Fuchs (3):
Migrate esd 405EP boards to new NAND subsystem Migrate esd 405EP boards to new NAND subsystem Migrate esd 405EP boards to new NAND subsystem
Thomas Knobloch (1):
[NAND] Bad block skipping for command nboot
board/esd/ash405/Makefile | 4 +- board/esd/ash405/ash405.c | 43 +++++-------------- board/esd/cms700/Makefile | 5 ++- board/esd/cms700/cms700.c | 39 ++++------------- board/esd/common/auto_update.c | 4 ++ board/esd/common/esd405ep_nand.c | 87 ++++++++++++++++++++++++++++++++++++++ board/esd/hh405/Makefile | 5 ++- board/esd/hh405/hh405.c | 22 +--------- board/esd/hub405/Makefile | 4 +- board/esd/hub405/hub405.c | 34 --------------- board/esd/plu405/Makefile | 5 ++- board/esd/plu405/plu405.c | 56 ++++-------------------- board/esd/voh405/Makefile | 4 +- board/esd/voh405/voh405.c | 20 --------- board/esd/wuh405/Makefile | 4 +- board/esd/wuh405/wuh405.c | 33 -------------- common/cmd_nand.c | 37 ++++++++++++++-- include/configs/ASH405.h | 43 +++++------------- include/configs/CMS700.h | 39 ++++------------- include/configs/CPCI405.h | 2 - include/configs/CPCI4052.h | 2 - include/configs/CPCI405AB.h | 3 - include/configs/CPCI405DT.h | 2 - include/configs/HH405.h | 39 ++++------------- include/configs/HUB405.h | 39 ++++------------- include/configs/PLU405.h | 57 ++++--------------------- include/configs/VOH405.h | 39 ++++------------- include/configs/WUH405.h | 42 ++++-------------- 28 files changed, 243 insertions(+), 470 deletions(-) create mode 100644 board/esd/common/esd405ep_nand.c
[U-Boot-Users] [NAND] Please pull git://www.denx.de/git/u-boot-nand-flash.git
Quoted 7 lines · In message <[email protected]> you wrote:
The following changes since commit
461f2274f8d5e15a354ff92648f17c7b2aa76faa:
Stefan Roese (1):
Merge withgit://www.denx.de/git/u-boot.gitare available in the git repository at:
git://www.denx.de/git/u-boot-nand-flash.git
Merged. Thanks.
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de There is, however, a strange, musty smell in the air that reminds me of something...hmm...yes...I've got it...there's a VMS nearby, or I'm a Blit. - Larry Wall in Configure from the perl distribution
[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
In reply to Stefan RoeseThe following changes since commit f31b0aecb5435143ac1cd5cf2abab1f9ef6ba8ea:
Stefan Roese (1):
Merge with git://www.denx.de/git/u-boot.git
are available in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.git
Niklaus Giger (2):
PPC4xx:HCU4/5 cleanup ecc/sdram init
PPC4xx:HCU4/5 cleanup
Stefan Roese (4):
ppc4xx: Update Sequoia/Rainier bootstrap command
Add missing rainier (PPC440GRx) target to MAKEALL and MAINTAINERs files
ppc4xx: Only enable POST FPU test on Sequoia and not Rainier
ppc4xx: Remove #warning in esd auto_update.c
MAINTAINERS | 1 + MAKEALL | 1 + board/amcc/sequoia/cmd_sequoia.c | 205 +++++++++++++++++++++++++++++--------- board/esd/common/auto_update.c | 4 - board/netstal/hcu4/hcu4.c | 20 ++-- board/netstal/hcu5/hcu5.c | 69 +++++++++---- board/netstal/hcu5/sdram.c | 15 ++- include/configs/sequoia.h | 7 +- 8 files changed, 237 insertions(+), 85 deletions(-)
[U-Boot-Users] [ColdFire] Please pull git://www.denx.de/git/u-boot-coldfire.git
The following changes since commit d35b508a55508535b6e8445b718585d27df733d3:
Kim Phillips (1):
fdt: suppress unused variable 'bd' warning
are available in the git repository at:
git://www.denx.de/git/u-boot-coldfire.git
John Rigby (2):
Merge branch 'master' into u-boot-5329-early Merge branch 'denx-coldfire' into coldfire-aug2007
Stefan Roese (7):
Merge with /home/stefan/git/u-boot/u-boot-coldfire-freescale Coding style cleanup
Merge with git://www.denx.de/git/u-boot.git
Coding style cleanup
Merge with git://www.denx.de/git/u-boot.git
Coding style cleanup
ColdFire: Fix some remaining problems with CFG_CMD_
TsiChung (1):
Cache update and added CFG_UNIFY_CACHE
TsiChung Liew (1):
Added M5329AFEE and M5329BFEE Platforms
TsiChungLiew (47):
Revert file mode
Create new header file and move peripherals base address from configs file to new header file. Clean up
Clean up
Seperate old structure defines and new structure defines
Seperate old structure defines and new structure defines
Duplicate code
Removed MII functions and replaced immap_5329.h and m5329.h with immap.h.
MII functions calls.
Update for flash.o and mii.o
Update header file and removed interrupt_init()
Update header file and enable icache
Update header file and some clean up
Enable Icache
Create interrupts.c and modify Makefile
Header file update, clean up and cache handling
Rename mcfserial.c. Update include header
Rename mcfrtc to rtc
New timer structure and defines
New uart structure and defines
Update header file and clean up
Add mcffec_initialize()
Update header files
Update header file. Include dtimer_intr_setup(). Changed timer divider to global define. Renamed CONFIG_MCFSERIAL to CONFIG_MCFUART
Declared attributes of void __mii_init(void) as an alias for int mii_init(void)
Moved sync() from board file to include/asm-m68k/io.h
Added uart_gpio_conf() in serial_init(), seperated uart port configuration from cpu_init() to uart_gpio_conf() Changed CFG_CLK to gd->bus_clk for CFG_TIMER_PRESCALER. Added DECLARE_GLOBAL_DATA_PTR for time.c Added I2C support
Added NAND support
Port enabled for I2C signals and chipselects port configuration.
ColdFire: MCF5329 Update and cleanup
ColdFire: MCF5329 header file clean up
ColdFire: MCF5329 update cache
ColdFire: MCF52x2 update
ColdFire: MCF52x2 Header files update
ColdFire: cobra5272 platform for MCF52x2 update
ColdFire: idmr platform MCF52x2 update
ColdFire: update r5200 platform for MCF52x2
ColdFire: update TASREG platform for MCF52x2
ColdFire: Update EB+MCF-EV123 platform
ColdFire: Update Freescale MCF52x2 platforms
ColdFire: Add M5249EVB platform for MCF52x2
ColdFire: Add M5253EVBE platform for MCF52x2
ColdFire: Add M54455EVB for MCF5445x
ColdFire: Add M5235EVB Platform for MCF523x
CREDITS | 45 +- MAINTAINERS | 10 + MAKEALL | 7 +- Makefile | 67 ++ README | 2 + board/BuS/EB+MCF-EV123/Makefile | 2 +- board/BuS/EB+MCF-EV123/mii.c | 304 ++++++ board/cobra5272/Makefile | 2 +- board/cobra5272/cobra5272.c | 5 +- board/cobra5272/mii.c | 303 ++++++ board/freescale/m5235evb/Makefile | 44 + board/freescale/m5235evb/config.mk | 28 + board/freescale/m5235evb/m5235evb.c | 117 +++ board/freescale/m5235evb/mii.c | 307 ++++++ board/freescale/m5235evb/u-boot.16 | 145 +++ board/freescale/m5235evb/u-boot.32 | 153 +++ board/freescale/m5235evb/u-boot.lds | 145 +++ board/freescale/m5249evb/Makefile | 44 + board/freescale/m5249evb/config.mk | 25 + board/freescale/m5249evb/m5249evb.c | 113 +++ board/freescale/m5249evb/u-boot.lds | 146 +++ board/freescale/m5253evbe/Makefile | 44 + board/freescale/m5253evbe/config.mk | 25 + board/freescale/m5253evbe/m5253evbe.c | 132 +++ board/freescale/m5253evbe/u-boot.lds | 144 +++ board/freescale/m5329evb/Makefile | 44 + board/freescale/m5329evb/config.mk | 25 + board/freescale/m5329evb/m5329evb.c | 88 ++ board/freescale/m5329evb/mii.c | 306 ++++++ board/freescale/m5329evb/nand.c | 114 +++ board/freescale/m5329evb/u-boot.lds | 144 +++ board/freescale/m54455evb/Makefile | 44 + board/freescale/m54455evb/config.mk | 25 + board/freescale/m54455evb/flash.c | 974 +++++++++++++++++++ board/freescale/m54455evb/m54455evb.c | 164 ++++ board/freescale/m54455evb/mii.c | 320 +++++++ board/freescale/m54455evb/u-boot.lds | 144 +++ board/idmr/Makefile | 2 +- board/idmr/idmr.c | 3 +- board/idmr/mii.c | 303 ++++++ board/m5271evb/Makefile | 2 +- board/m5271evb/m5271evb.c | 3 +- board/m5271evb/mii.c | 303 ++++++ board/m5272c3/Makefile | 2 +- board/m5272c3/m5272c3.c | 7 +- board/m5272c3/mii.c | 303 ++++++ board/m5282evb/Makefile | 2 +- board/m5282evb/config.mk | 2 +- board/m5282evb/flash.c | 378 -------- board/m5282evb/m5282evb.c | 61 ++- board/m5282evb/mii.c | 304 ++++++ board/r5200/Makefile | 2 +- board/r5200/mii.c | 303 ++++++ common/cmd_bdinfo.c | 67 ++- common/cmd_mii.c | 2 +- cpu/mcf523x/Makefile | 48 + cpu/mcf523x/config.mk | 27 + cpu/mcf523x/cpu.c | 109 +++ cpu/mcf523x/cpu_init.c | 145 +++ cpu/mcf523x/interrupts.c | 49 + cpu/mcf523x/speed.c | 49 + cpu/mcf523x/start.S | 340 +++++++ cpu/mcf52x2/Makefile | 4 +- cpu/mcf52x2/cpu.c | 184 ++-- cpu/mcf52x2/cpu_init.c | 448 ++++++---- cpu/mcf52x2/fec.c | 605 ------------ cpu/mcf52x2/interrupts.c | 186 +--- cpu/mcf52x2/serial.c | 215 ----- cpu/mcf52x2/speed.c | 35 +- cpu/mcf52x2/start.S | 54 +- cpu/mcf532x/Makefile | 48 + cpu/mcf532x/config.mk | 27 + cpu/mcf532x/cpu.c | 119 +++ cpu/mcf532x/cpu_init.c | 141 +++ cpu/mcf532x/interrupts.c | 49 + cpu/mcf532x/speed.c | 216 +++++ cpu/mcf532x/start.S | 335 +++++++ cpu/mcf5445x/Makefile | 48 + cpu/mcf5445x/config.mk | 27 + cpu/mcf5445x/cpu.c | 97 ++ cpu/mcf5445x/cpu_init.c | 140 +++ cpu/mcf5445x/interrupts.c | 52 + cpu/mcf5445x/pci.c | 189 ++++ cpu/mcf5445x/speed.c | 186 ++++ cpu/mcf5445x/start.S | 388 ++++++++ doc/README.m5253evbe | 103 ++ doc/README.m54455evb | 416 +++++++++ drivers/net/Makefile | 45 + drivers/net/mcffec.c | 597 ++++++++++++ drivers/serial/Makefile | 45 + drivers/serial/mcfuart.c | 131 +++ include/asm-m68k/bitops.h | 39 + include/asm-m68k/byteorder.h | 102 ++- include/asm-m68k/errno.h | 138 +++ include/asm-m68k/fec.h | 277 ++++++- include/asm-m68k/fsl_i2c.h | 86 ++ include/asm-m68k/global_data.h | 8 + include/asm-m68k/immap.h | 242 +++++ include/asm-m68k/immap_5235.h | 378 ++++++++ include/asm-m68k/immap_5249.h | 22 +- include/asm-m68k/immap_5253.h | 95 ++ include/asm-m68k/immap_5271.h | 136 ++-- include/asm-m68k/immap_5272.h | 689 ++++++-------- include/asm-m68k/immap_5282.h | 217 ++++-- include/asm-m68k/immap_5329.h | 793 ++++++++++++++++ include/asm-m68k/immap_5445x.h | 937 +++++++++++++++++++ include/asm-m68k/io.h | 221 +++++- include/asm-m68k/m5235.h | 905 ++++++++++++++++++ include/asm-m68k/m5249.h | 205 ++--- include/asm-m68k/m5253.h | 73 ++ include/asm-m68k/m5271.h | 105 ++- include/asm-m68k/m5272.h | 221 ++++-- include/asm-m68k/m5282.h | 270 ++++-- include/asm-m68k/m5329.h | 1658 +++++++++++++++++++++++++++++++++ include/asm-m68k/m5445x.h | 1541 ++++++++++++++++++++++++++++++ include/asm-m68k/mcftimer.h | 113 --- include/asm-m68k/mcfuart.h | 221 ----- include/asm-m68k/ptrace.h | 44 +- include/asm-m68k/rtc.h | 109 +++ include/asm-m68k/timer.h | 118 +++ include/asm-m68k/u-boot.h | 56 +- include/asm-m68k/uart.h | 171 ++++ include/common.h | 2 +- include/configs/EB+MCF-EV123.h | 41 +- include/configs/M5235EVB.h | 261 ++++++ include/configs/M5249EVB.h | 194 ++++ include/configs/M5253EVBE.h | 212 +++++ include/configs/M5271EVB.h | 100 ++- include/configs/M5272C3.h | 105 ++- include/configs/M5282EVB.h | 147 +++- include/configs/M5329EVB.h | 267 ++++++ include/configs/M54455EVB.h | 391 ++++++++ include/configs/TASREG.h | 4 + include/configs/cobra5272.h | 26 +- include/configs/idmr.h | 32 +- include/configs/r5200.h | 30 +- lib_m68k/Makefile | 2 +- lib_m68k/board.c | 98 ++- lib_m68k/interrupts.c | 115 +++ lib_m68k/m68k_linux.c | 378 +++++--- lib_m68k/time.c | 250 ++---- net/eth.c | 4 + rtc/Makefile | 3 +- rtc/mcfrtc.c | 121 +++ 144 files changed, 22386 insertions(+), 3284 deletions(-) create mode 100644 board/BuS/EB+MCF-EV123/mii.c create mode 100644 board/cobra5272/mii.c create mode 100644 board/freescale/m5235evb/Makefile create mode 100644 board/freescale/m5235evb/config.mk create mode 100644 board/freescale/m5235evb/m5235evb.c create mode 100644 board/freescale/m5235evb/mii.c create mode 100644 board/freescale/m5235evb/u-boot.16 create mode 100644 board/freescale/m5235evb/u-boot.32 create mode 100644 board/freescale/m5235evb/u-boot.lds create mode 100644 board/freescale/m5249evb/Makefile create mode 100644 board/freescale/m5249evb/config.mk create mode 100644 board/freescale/m5249evb/m5249evb.c create mode 100644 board/freescale/m5249evb/u-boot.lds create mode 100644 board/freescale/m5253evbe/Makefile create mode 100644 board/freescale/m5253evbe/config.mk create mode 100644 board/freescale/m5253evbe/m5253evbe.c create mode 100644 board/freescale/m5253evbe/u-boot.lds create mode 100644 board/freescale/m5329evb/Makefile create mode 100644 board/freescale/m5329evb/config.mk create mode 100644 board/freescale/m5329evb/m5329evb.c create mode 100644 board/freescale/m5329evb/mii.c create mode 100644 board/freescale/m5329evb/nand.c create mode 100644 board/freescale/m5329evb/u-boot.lds create mode 100644 board/freescale/m54455evb/Makefile create mode 100644 board/freescale/m54455evb/config.mk create mode 100644 board/freescale/m54455evb/flash.c create mode 100644 board/freescale/m54455evb/m54455evb.c create mode 100644 board/freescale/m54455evb/mii.c create mode 100644 board/freescale/m54455evb/u-boot.lds create mode 100644 board/idmr/mii.c create mode 100644 board/m5271evb/mii.c create mode 100644 board/m5272c3/mii.c delete mode 100644 board/m5282evb/flash.c create mode 100644 board/m5282evb/mii.c create mode 100644 board/r5200/mii.c create mode 100644 cpu/mcf523x/Makefile create mode 100644 cpu/mcf523x/config.mk create mode 100644 cpu/mcf523x/cpu.c create mode 100644 cpu/mcf523x/cpu_init.c create mode 100644 cpu/mcf523x/interrupts.c create mode 100644 cpu/mcf523x/speed.c create mode 100644 cpu/mcf523x/start.S delete mode 100644 cpu/mcf52x2/fec.c delete mode 100644 cpu/mcf52x2/serial.c create mode 100644 cpu/mcf532x/Makefile create mode 100644 cpu/mcf532x/config.mk create mode 100644 cpu/mcf532x/cpu.c create mode 100644 cpu/mcf532x/cpu_init.c create mode 100644 cpu/mcf532x/interrupts.c create mode 100644 cpu/mcf532x/speed.c create mode 100644 cpu/mcf532x/start.S create mode 100644 cpu/mcf5445x/Makefile create mode 100644 cpu/mcf5445x/config.mk create mode 100644 cpu/mcf5445x/cpu.c create mode 100644 cpu/mcf5445x/cpu_init.c create mode 100644 cpu/mcf5445x/interrupts.c create mode 100644 cpu/mcf5445x/pci.c create mode 100644 cpu/mcf5445x/speed.c create mode 100644 cpu/mcf5445x/start.S create mode 100644 doc/README.m5253evbe create mode 100644 doc/README.m54455evb create mode 100644 drivers/net/Makefile create mode 100644 drivers/net/mcffec.c create mode 100644 drivers/serial/Makefile create mode 100644 drivers/serial/mcfuart.c create mode 100644 include/asm-m68k/errno.h create mode 100644 include/asm-m68k/fsl_i2c.h create mode 100644 include/asm-m68k/immap.h create mode 100644 include/asm-m68k/immap_5235.h create mode 100644 include/asm-m68k/immap_5253.h create mode 100644 include/asm-m68k/immap_5329.h create mode 100644 include/asm-m68k/immap_5445x.h create mode 100644 include/asm-m68k/m5235.h create mode 100644 include/asm-m68k/m5253.h create mode 100644 include/asm-m68k/m5329.h create mode 100644 include/asm-m68k/m5445x.h delete mode 100644 include/asm-m68k/mcftimer.h delete mode 100644 include/asm-m68k/mcfuart.h create mode 100644 include/asm-m68k/rtc.h create mode 100644 include/asm-m68k/timer.h create mode 100644 include/asm-m68k/uart.h create mode 100644 include/configs/M5235EVB.h create mode 100644 include/configs/M5249EVB.h create mode 100644 include/configs/M5253EVBE.h create mode 100644 include/configs/M5329EVB.h create mode 100644 include/configs/M54455EVB.h create mode 100644 lib_m68k/interrupts.c create mode 100644 rtc/mcfrtc.c
[U-Boot-Users] [ColdFire] Please pull git://www.denx.de/git/u-boot-coldfire.git
Quoted 7 lines · In message <[email protected]> you wrote:
The following changes since commit
d35b508a55508535b6e8445b718585d27df733d3:
Kim Phillips (1):
fdt: suppress unused variable 'bd' warningare available in the git repository at:
git://www.denx.de/git/u-boot-coldfire.git
Done. Thanks.
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "...one of the main causes of the fall of the Roman Empire was that, lacking zero, they had no way to indicate successful termination of their C programs." - Robert Firth
Wolfgang Denk
Applied[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
In reply to Stefan RoeseQuoted 7 lines · In message <[email protected]> you wrote:
The following changes since commit
f31b0aecb5435143ac1cd5cf2abab1f9ef6ba8ea:
Stefan Roese (1):
Merge withgit://www.denx.de/git/u-boot.gitare available in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.git
Merged, thanks.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Microsoft Multitasking:
several applications can crash at the same time.[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
In reply to Stefan RoeseThe following changes since commit 3e66c078003607a7d1d214c15a5f262bc1b4032f:
Wolfgang Denk (1):
Fix some build errors.
are available in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.git
Wolfgang, please pull. These patches contain mainly small enhancements and bug-fixes.
Thanks.
Stefan Roese (6):
ppc4xx: Add matrix kbd support to lwmon5 board (440EPx based) Merge with /home/stefan/git/u-boot/u-boot-ppc4xx
ppc4xx: Remove unused option CFG_INIT_RAM_OCM
ppc4xx: Add support for 2nd I2C EEPROM on lwmon5 board
ppc4xx: Change GPIO signal for watchdog triggering on lwmon5
ppc4xx: Add RTC POST test to lwmon5 board configuration
Yuri Tikhonov (1):
POST: limit memory test area to not touch global data anymore
board/lwmon5/Makefile | 2 +- board/lwmon5/kbd.c | 458 +++++++++++++++++++++++++++++++++++++++++ board/lwmon5/lwmon5.c | 40 +++- include/asm-ppc/global_data.h | 2 +- include/configs/hcu5.h | 1 - include/configs/lwmon5.h | 47 +++-- post/drivers/memory.c | 3 + 7 files changed, 523 insertions(+), 30 deletions(-) create mode 100644 board/lwmon5/kbd.c
[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
Quoted 11 lines · In message <[email protected]> you wrote:
The following changes since commit
3e66c078003607a7d1d214c15a5f262bc1b4032f:
Wolfgang Denk (1):
Fix some build errors.are available in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.gitWolfgang, please pull. These patches contain mainly small enhancements and bug-fixes.
Done.
Best regards,
Wolfgang Denk
Signature · 8 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "It follows that any commander in chief who undertakes to carry out a plan which he considers defective is at fault; he must put forth his reasons, insist of the plan being changed, and finally tender his resignation rather than be the instrument of his army's downfall." - Napoleon, "Military Maxims and Thought"
[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
In reply to Stefan RoeseThe following changes since commit 9c02defc29b57945b600714cf61ddfd02b02fb14:
Yuri Tikhonov (1):
POST: limit memory test area to not touch global data anymore
are available in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.git ..BRANCH.NOT.VERIFIED..
Gary Jennejohn (1):
ppc4xx: (Re-)Enable CONFIG_PCI_PNP on AMCC 440EPx Sequoia
board/amcc/sequoia/init.S | 3 +++ drivers/pci_auto.c | 8 +++++++- include/configs/sequoia.h | 3 ++- 3 files changed, 12 insertions(+), 2 deletions(-)
[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
Quoted 7 lines · In message <[email protected]> you wrote:
The following changes since commit
9c02defc29b57945b600714cf61ddfd02b02fb14:
Yuri Tikhonov (1):
POST: limit memory test area to not touch global data anymoreare available in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.git..BRANCH.NOT.VERIFIED..
What does "..BRANCH.NOT.VERIFIED.." mean ?!?
Quoted 2 lines
Gary Jennejohn (1):
ppc4xx: (Re-)EnableCONFIG_PCI_PNPon AMCC 440EPx Sequoia
Merged.
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "A dirty mind is a joy forever." - Randy Kunkee
[U-Boot-Users] [NAND] Please pull git://www.denx.de/git/u-boot-nand-flash.git
In reply to Stefan RoeseThe following changes since commit 67c31036acaaaa992fc346cc89db0909a7e733c4:
Wolfgang Denk (1):
TQM8xx[LM]: Fix broken environment alignment.
are available in the git repository at:
git://www.denx.de/git/u-boot-nand-flash.git
Kyungmin Park (3):
OneNAND support (take #2)
OneNAND support (take #2)
OneNAND support (take #2)
Stefan Roese (1):
Small whitespace cleanup of OneNAND patch
Makefile | 1 + common/Makefile | 3 +- common/cmd_nvedit.c | 9 +- common/cmd_onenand.c | 155 +++++ common/env_onenand.c | 134 ++++ drivers/onenand/Makefile | 44 ++ drivers/onenand/onenand_base.c | 1294 ++++++++++++++++++++++++++++++++++++++ drivers/onenand/onenand_bbt.c | 265 ++++++++ include/config_cmd_all.h | 1 + include/linux/mtd/bbm.h | 127 ++++ include/linux/mtd/onenand.h | 143 +++++ include/linux/mtd/onenand_regs.h | 181 ++++++ include/onenand_uboot.h | 39 ++ lib_arm/board.c | 8 + 14 files changed, 2400 insertions(+), 4 deletions(-) create mode 100644 common/cmd_onenand.c create mode 100644 common/env_onenand.c create mode 100644 drivers/onenand/Makefile create mode 100644 drivers/onenand/onenand_base.c create mode 100644 drivers/onenand/onenand_bbt.c create mode 100644 include/linux/mtd/bbm.h create mode 100644 include/linux/mtd/onenand.h create mode 100644 include/linux/mtd/onenand_regs.h create mode 100644 include/onenand_uboot.h
[U-Boot-Users] [NAND] Please pull git://www.denx.de/git/u-boot-nand-flash.git
Quoted 8 lines · In message <[email protected]> you wrote:
The following changes since commit
67c31036acaaaa992fc346cc89db0909a7e733c4:
Wolfgang Denk (1):
TQM8xx[LM]: Fix broken environment alignment.are available in the git repository at:
git://www.denx.de/git/u-boot-nand-flash.git
Quoted 7 lines
Kyungmin Park (3):
OneNAND support (take #2)
OneNAND support (take #2)
OneNAND support (take #2)Stefan Roese (1):
Small whitespace cleanup of OneNAND patch
Done, thanks.
Best regards,
Wolfgang Denk
Signature · 7 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
KLB is an acronym for `Known Lazy Bastard', aka non-FAQ reader, aka
person who would rather make someone take their time to explain
something basic than look it up in a FAQ.
-- Tom Christiansen in <[email protected]>[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
In reply to Stefan RoeseThe following changes since commit c3c909a209d05f27ebd090f21c0b46d90925f990:
Wolfgang Denk (1):
Merge with git+ssh://gemini_vpn/home/wd/git/u-boot/master
are available in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.git master
Stefan Roese (3):
ppc4xx: Change lwmon5 default environment to support Linux RTC
ppc4xx: lwmon5: Change GPIO 58 to default to low (watchdog test) Merge branch 'master' of /home/stefan/git/u-boot/lwmon5
include/configs/lwmon5.h | 11 ++++++----- 1 files changed, 6 insertions(+), 5 deletions(-)
[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
The following changes since commit c3c909a209d05f27ebd090f21c0b46d90925f990:
Wolfgang Denk (1):
Merge with git+ssh://gemini_vpn/home/wd/git/u-boot/master
are available in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.git master
Grzegorz Bernacki (1):
Program EPLD to force full duplex mode for PHY.
Stefan Roese (5):
ppc4xx: Change lwmon5 default environment to support Linux RTC
ppc4xx: lwmon5: Change GPIO 58 to default to low (watchdog test) Merge branch 'master' of /home/stefan/git/u-boot/lwmon5
ppc4xx: lwmon5: Remove watchdog for now, since not fully tested yet
ppc4xx: Coding style cleanup
board/amcc/luan/luan.c | 17 ++++++++++++----- cpu/ppc4xx/440spe_pcie.c | 10 +++++----- cpu/ppc4xx/4xx_enet.c | 16 ++++++++++------ include/configs/lwmon5.h | 16 +++++++++++----- 4 files changed, 38 insertions(+), 21 deletions(-)
[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
Quoted 11 lines · In message <[email protected]> you wrote:
The following changes since commit
c3c909a209d05f27ebd090f21c0b46d90925f990:
Wolfgang Denk (1):
Merge with git+ssh://gemini_vpn/home/wd/git/u-boot/masterare available in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.gitmasterGrzegorz Bernacki (1):
Program EPLD to force full duplex mode for PHY.
Quoted 6 lines
Stefan Roese (5):
ppc4xx: Change lwmon5 default environment to support Linux RTC
ppc4xx: lwmon5: Change GPIO 58 to default to low (watchdog test) Merge branch 'master' of/home/stefan/git/u-boot/lwmon5
ppc4xx: lwmon5: Remove watchdog for now, since not fully tested yet
ppc4xx: Coding style cleanup
Done. Thanks.
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Der Dativ ist dem Genitiv sein Tod.
[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
In reply to Stefan RoeseThe following changes since commit f8bf90461d9bad2e6fed31fcebaf235f60dd6763:
Michal Simek (1):
[FIX] XUPV2P change command handling
are available in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.git master
Wolfgang, please pull this into current rc, since these are bugfixes. Thanks.
Stefan Roese (2):
ppc4xx: Fix incorrect 33/66MHz PCI clock log-message on Sequoia & Yosemite
ppc4xx: Fix bug in I2C bootstrap values for Sequoia/Rainier
board/amcc/sequoia/cmd_sequoia.c | 9 +++++++-- board/amcc/sequoia/sequoia.c | 7 ++++--- board/amcc/yosemite/yosemite.c | 7 +++++-- include/configs/sequoia.h | 2 ++ include/configs/yosemite.h | 2 ++ 5 files changed, 20 insertions(+), 7 deletions(-)
[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
Quoted 6 lines · In message <[email protected]> you wrote:
The following changes since commit
f8bf90461d9bad2e6fed31fcebaf235f60dd6763:
Michal Simek (1):
[FIX] XUPV2P change command handlingare available in the git repository at:
Quoted 8 lines
git://www.denx.de/git/u-boot-ppc4xx.gitmasterWolfgang, please pull this into current rc, since these are bugfixes. Thanks.
Stefan Roese (2):
ppc4xx: Fix incorrect 33/66MHz PCI clock log-message on Sequoia & Yosemite
ppc4xx: Fix bug in I2C bootstrap values for Sequoia/Rainier
Merged. Thanks.
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Der Dativ ist dem Genitiv sein Tod.
[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
In reply to Stefan RoeseThe following changes since commit eff786a9b89144478f478c4193fcad5b498feb72:
Wolfgang Denk (1):
Merge branch 'master' of git+ssh://gemini_vpn/home/wd/git/u-boot/master
are available in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.git master
Wolfgang, please pull this additional fixup into current rc. Thanks.
Stefan Roese (1):
ppc4xx: Add 667/133 (CPU/PLB) frequency setup to Sequoia bootstrap command
board/amcc/sequoia/cmd_sequoia.c | 8 +++++++- 1 files changed, 7 insertions(+), 1 deletions(-)
[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
Quoted 6 lines · In message <[email protected]> you wrote:
The following changes since commit
eff786a9b89144478f478c4193fcad5b498feb72:
Wolfgang Denk (1):
Merge branch 'master' of git+ssh://gemini_vpn/home/wd/git/u-boot/masterare available in the git repository at:
Quoted 7 lines
git://www.denx.de/git/u-boot-ppc4xx.gitmasterWolfgang, please pull this additional fixup into current rc. Thanks.
Stefan Roese (1):
ppc4xx: Add 667/133 (CPU/PLB) frequency setup to Sequoia bootstrap command
Done.
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
A Perl script is correct if it's halfway readable and gets the job
done before your boss fires you.
- L. Wall & R. L. Schwartz, _Programming Perl_[U-Boot-Users] [cfi-flash] Please pull git://www.denx.de/git/u-boot-cfi-flash.git
In reply to Stefan RoeseHi Wolfgang,
The following changes since commit 41be969f4957115ed7b1fe8b890bfaee99d7a7a2:
Wolfgang Denk (1):
Release v1.3.1
are available in the git repository at:
git://www.denx.de/git/u-boot-cfi-flash.git master
Bartlomiej Sieka (1):
CFI: synchronize command offsets with Linux CFI driver
Haavard Skinnemoen (10):
cfi_flash: Break long lines
cfi_flash: Make some needlessly global functions static
cfi_flash: Reorder functions and eliminate extra prototypes Implement __raw_{read,write}[bwl] on all architectures
cfi_flash: Introduce read and write accessors Introduce map_physmem() and unmap_physmem()
cfi_flash: Use map_physmem() and unmap_physmem()
cfi_flash: Read whole QRY structure in one go
cfi_flash: Add cmdset-specific init functions
cfi_flash: Add manufacturer-specific fixups
Michael Schwingen (1):
CFI: support JEDEC flash roms in CFI-flash framework
Stefan Roese (1):
CFI: Coding style cleanup
drivers/mtd/Makefile | 1 + drivers/mtd/cfi_flash.c | 1907 +++++++++++++++++++++++++------------------ drivers/mtd/jedec_flash.c | 311 +++++++ include/asm-arm/io.h | 26 + include/asm-avr32/io.h | 32 + include/asm-blackfin/io.h | 26 + include/asm-i386/io.h | 26 + include/asm-m68k/io.h | 41 + include/asm-microblaze/io.h | 26 + include/asm-mips/io.h | 26 + include/asm-nios/io.h | 34 + include/asm-nios2/io.h | 34 + include/asm-ppc/io.h | 58 ++- include/flash.h | 11 + 14 files changed, 1773 insertions(+), 786 deletions(-) create mode 100644 drivers/mtd/jedec_flash.c
Best regards,
Stefan
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
[U-Boot-Users] [cfi-flash] Please pull git://www.denx.de/git/u-boot-cfi-flash.git
Dear Stefan,
Quoted 8 lines · in message <[email protected]> you wrote:
The following changes since commit
41be969f4957115ed7b1fe8b890bfaee99d7a7a2:
Wolfgang Denk (1):Release v1.3.1are available in the git repository at:
git://www.denx.de/git/u-boot-cfi-flash.gitmaster
Done.
Note that the new, updated code still shows some old issues. See next posting for details.
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Memories of you remind me of you. - Karl Lehenbauer
[U-Boot-Users] [cfi-flash] Please pull git://www.denx.de/git/u-boot-cfi-flash.git
In reply to Stefan RoeseThe following changes since commit 0dcfe3a225a9436fc514f374a19242c672f1172b:
Wolfgang Denk (1):
Merge branch 'master' of /home/wd/git/u-boot/custodians
are available in the git repository at:
git://www.denx.de/git/u-boot-cfi-flash.git master
Stefan Roese (1):
cfi_flash: Add missing check for erased dest to flash_write_cfibuffer()
drivers/mtd/cfi_flash.c | 52 ++++++++++++++++++++++++++++++++++++++++++++++- 1 files changed, 51 insertions(+), 1 deletions(-)
[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
Wolfgang, please pull the 4xx changes from the u-boot-ppc4xx master branch.
Unfortunately I couldn't create a complete list of changes as done usually, since I merge multiple times with mainline. Then "git-request-pull" isn't useful anymore to create a list of changes only present in the local repository. It creates a list of changes which also included patches from the mainline repo. Perhaps somebody else with more "git-knowledge" can help out here and tell me how to create such a git-shortlog which only includes the local changes.
Thanks.
Note: The current PMC440 port added by Matthias Fuchs relies on some other patches to be applied (FPGA etc.). So it doesn't build currently.
Here is a list of changes which is *not* complete. I generated this quite a while ago, before my first merge with mainline:
The following changes since commit 49801028715cd8bc22863cdfc0ee7919b7a6af4b:
Stefan Roese (1):
Merge git://www.denx.de/git/u-boot
are available in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.git master
Eugene O'Brien (2):
ppc4xx: Define CONFIG_BOOKE for all PPC440 based processors
ppc4xx: Fixed offset of refresh rate type for Bamboo on-board DDR SDRAM
Matthias Fuchs (3):
ppc4xx: Remove redundant code from 4xx network driver
ppc4xx: Make USB working with CONFIG_4xx_DCACHE defined
ppc4xx: Use generic usb-ohci driver for sequoia board
Stefan Roese (70):
ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (1)
ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (2)
ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (3)
ppc4xx: Add a comment for 405EX PCIe endpoint configuration
ppc4xx: Rename 405gp_pci to 4xx_pci since its used on all 4xx platforms
ppc4xx: 4xx_pcie: Fix problem with SDRN access using port number as idx
ppc4xx: 4xx_pcie: Change CFG_PCIE_MEMSIZE to 128MB on Yucca & Katmai
ppc4xx: 4xx_pcie: More general cleanup and 405EX PCIe support added
ppc4xx: 4xx_pcie: Disable debug output as default
ppc4xx: 4xx_pcie: Change PCIe status output to match common style
DTT: Prepare DS1775 driver for use of different I2C addresses
POST: Add 405EX support to 4xx UART POST test
ppc4xx: Add initial fdt support to 4xx (first needed on 405EX)
ppc4xx: Cleanup of 4xx PCI and PCIe support (renaming)
ppc4xx: Add PPC405EX support
ppc4xx: Add initial AMCC Kilauea 405EX support
ppc4xx: Fix small merge problem in 4xx_enet.c
ppc4xx: Fix small merge problems with CPCI440 and Acadia boards
ppc4xx: Add additional debug info to 4xx fdt support
ppc4xx: Enable device tree support (fdt) on Kilauea per default
ppc4xx: Dynamic configuration of 4xx PCIe mode as root or endpoint mode
ppc4xx: Add PCIe endpoint support on Kilauea (405EX)
ppc4xx: Change inbound PCIe location for endpoint tests on Katmai
ppc4xx: Fix size setup in Kilauea DDR2 init routine
ppc4xx: Consolidate some of the 405 and 440 macros/structs into 4xx
rtc: Add Xicor/Intersil X1205 RTC support
ppc: Small Kilauea cleanup of config file
ppc4xx: Add freqUART to CPU speed detection
ppc4xx: Add initial AMCC Makalu 405EX support
ppc4xx: Correct UART input clock calculation and passing to fdt
ppc4xx: Rework of 4xx serial driver (1)
ppc4xx: Rework of 4xx serial driver (2)
ppc4xx: Rework of 4xx serial driver (3)
ppc4xx: Rework of 4xx serial driver (4)
ppc4xx: Add SNTP support to AMCC Katmai, Kilauea & Makalu boards
ppc4xx: Add initial AMCC Haleakala PPC405EXr eval board support
ppc4xx: Correct UART input clock calculation and passing to fdt
ppc4xx: Fix POST ethernet test for Haleakala
ppc4xx: Change 4xx_enet & miiphy to use out_be32() and friends
ppc4xx: Change autonegotiation timeout from 4 to 5 seconds
ppc4xx: Remove temporary TLB entry in POST cache test
ppc4xx: Remove compiler warning from previous commit
ppc4xx: Rework 4xx cache support
ppc4xx: Remove cache definition from 4xx board config files
ppc4xx: Add change_tlb function to modify I attribute of TLB(s)
ppc4xx: Change 4xx ethernet driver to handle cached memory too
ppc4xx: Remove temporary TLB entry in POST cache test only for 440
ppc4xx: Change 4xx POST ethernet test to handle cached memory too
ppc4xx: Enable CPU POST test for 4xx with dcache enabled
ppc4xx: Add CONFIG_4xx_DCACHE compile options to enable cached SDRAM
ppc4xx: Fix acadia_nand build problem
ppc4xx: Add AMCC Kilauea/Haleakala NAND booting support
ppc4xx: Make output a little shorter on PCIe detection
ppc4xx: Make output a little shorter on I2C bootrom detection
ppc4xx: Remove In:/Out:/Err: boot output for AMCC Kilauea
ppc4xx: Fix 405EX PCIe UTLSET register setup
ppc4xx: AMCC Taihu board config file cleanup
ppc4xx: Enable 440 GPIO init table CFG_440_GPIO_TABLE for 405 platforms
ppc4xx: Small AMCC Kilauea cleanup
ppc4xx: Update AMCC Makalu for board rev 1.1
ppc4xx: Enable 405EX PCIe UTL register configuration
ppc4xx: Update AMCC Kilauea config file
ppc4xx: Correct 405EX PCIe UTL register mapping
ppc4xx: Kilauea: Configure pin mux to use ext IRQ2 as interrupt
ppc4xx: Makalu: Change EBC setup for CS0 to enable 400MHz usage
ppc4xx: Kilauea & Makalu: Fix ext IRQ pin multiplexing
ppc4xx: Kilauea: Add PCIe reset assertion upon power-up
ppc4xx: Yosemite/Yellowstone: Add DTT AD7414 support
ppc4xx: Enable hardware-fix for PCI/DMA errata on AMCC 440SP/SPe boards
ppc4xx: 405EX: Correctly enable USB pins
MAINTAINERS | 3 +
MAKEALL | 5 +
Makefile | 17 +
board/amcc/bamboo/bamboo.c | 4 +-
board/amcc/bubinga/u-boot.lds | 13 -
board/amcc/ebony/u-boot.lds | 13 -
board/amcc/katmai/katmai.c | 84 +-
board/amcc/kilauea/Makefile | 50 ++
board/amcc/kilauea/cmd_pll.c | 297 +++++++
board/amcc/kilauea/config.mk | 32 +
board/amcc/kilauea/init.S | 154 ++++
board/amcc/kilauea/kilauea.c | 391 ++++++++
board/amcc/kilauea/memory.c | 79 ++
.../u-boot.lds.debug => kilauea/u-boot-nand.lds} | 53 +-
.../{yucca/u-boot.lds.debug => kilauea/u-boot.lds} | 59 +-
board/amcc/luan/luan.c | 6 +
board/amcc/makalu/Makefile | 50 ++
board/amcc/makalu/cmd_pll.c | 297 +++++++
board/amcc/makalu/config.mk | 24 +
board/amcc/makalu/init.S | 148 ++++
board/amcc/makalu/makalu.c | 352 ++++++++
board/amcc/makalu/memory.c | 188 ++++
.../{yucca/u-boot.lds.debug => makalu/u-boot.lds} | 59 +-
board/amcc/ocotea/u-boot.lds | 13 -
board/amcc/sequoia/init.S | 4 +
board/amcc/taihu/u-boot.lds | 13 -
board/amcc/taishan/showinfo.c | 14 +-
board/amcc/taishan/u-boot.lds | 13 -
board/amcc/walnut/u-boot.lds | 13 -
board/amcc/yosemite/u-boot.lds | 13 -
board/amcc/yucca/u-boot.lds | 13 -
board/amcc/yucca/yucca.c | 93 +--
board/amirix/ap1000/u-boot.lds | 2 +-
board/cray/L1/u-boot.lds | 2 +-
board/csb272/u-boot.lds | 2 +-
board/csb472/u-boot.lds | 2 +-
board/dave/PPChameleonEVB/u-boot.lds | 2 +-
board/eric/u-boot.lds | 2 +-
board/esd/apc405/u-boot.lds | 2 +-
board/esd/ar405/u-boot.lds | 2 +-
board/esd/ash405/u-boot.lds | 2 +-
board/esd/canbt/u-boot.lds | 2 +-
board/esd/cms700/u-boot.lds | 2 +-
board/esd/cpci2dp/u-boot.lds | 2 +-
board/esd/cpci405/u-boot.lds | 2 +-
board/esd/cpci440/cpci440.c | 2 +-
board/esd/cpci440/u-boot.lds | 2 +-
board/esd/cpciiser4/u-boot.lds | 2 +-
board/esd/dasa_sim/u-boot.lds | 2 +-
board/esd/dp405/u-boot.lds | 2 +-
board/esd/du405/u-boot.lds | 2 +-
board/esd/hh405/u-boot.lds | 2 +-
board/esd/hub405/u-boot.lds | 2 +-
board/esd/ocrtc/cmd_ocrtc.c | 2 +-
board/esd/ocrtc/u-boot.lds | 2 +-
board/esd/pci405/cmd_pci405.c | 2 +-
board/esd/pci405/pci405.c | 2 +-
board/esd/pci405/u-boot.lds | 2 +-
board/esd/plu405/u-boot.lds | 2 +-
board/esd/pmc405/u-boot.lds | 2 +-
board/esd/voh405/u-boot.lds | 2 +-
board/esd/vom405/u-boot.lds | 2 +-
board/esd/wuh405/u-boot.lds | 2 +-
board/exbitgen/u-boot.lds | 2 +-
board/g2000/u-boot.lds | 2 +-
board/lwmon5/sdram.c | 2 +-
board/ml2/u-boot.lds | 2 +-
board/mpl/common/common_util.c | 6 +-
board/mpl/common/flash.c | 2 +-
board/mpl/mip405/u-boot.lds | 2 +-
board/mpl/pip405/u-boot.lds | 2 +-
board/netstal/hcu5/sdram.c | 2 +-
board/prodrive/alpr/u-boot.lds | 13 -
board/prodrive/p3p440/u-boot.lds | 13 -
board/sandburst/karef/u-boot.lds | 2 +-
board/sandburst/karef/u-boot.lds.debug | 2 +-
board/sandburst/metrobox/u-boot.lds | 2 +-
board/sandburst/metrobox/u-boot.lds.debug | 2 +-
board/sbc405/u-boot.lds | 2 +-
board/sc3/u-boot.lds | 2 +-
board/xilinx/ml300/ml300.c | 2 +-
board/xilinx/ml300/u-boot.lds | 2 +-
board/xpedite1k/u-boot.lds | 2 +-
board/xpedite1k/u-boot.lds.debug | 2 +-
common/serial.c | 6 +-
common/usb.c | 2 +-
cpu/ppc4xx/40x_spd_sdram.c | 2 +-
cpu/ppc4xx/440spe_pcie.h | 174 ----
cpu/ppc4xx/44x_spd_ddr.c | 15 +-
cpu/ppc4xx/44x_spd_ddr2.c | 31 +-
cpu/ppc4xx/4xx_enet.c | 360 +++++----
cpu/ppc4xx/{405gp_pci.c => 4xx_pci.c} | 13 +-
cpu/ppc4xx/{440spe_pcie.c => 4xx_pcie.c} | 849 ++++++++----------
cpu/ppc4xx/{serial.c => 4xx_uart.c} | 541 ++++--------
cpu/ppc4xx/Makefile | 41 +-
cpu/ppc4xx/cache.S | 233 +++++
cpu/ppc4xx/cpu.c | 114 ++--
cpu/ppc4xx/cpu_init.c | 18 +-
cpu/ppc4xx/fdt.c | 178 ++++
cpu/ppc4xx/gpio.c | 134 ++--
cpu/ppc4xx/interrupts.c | 20 +-
cpu/ppc4xx/iop480_uart.c | 238 +++++
cpu/ppc4xx/kgdb.S | 8 +-
cpu/ppc4xx/miiphy.c | 49 +-
cpu/ppc4xx/ndfc.c | 3 +-
cpu/ppc4xx/speed.c | 233 +++++-
cpu/ppc4xx/start.S | 211 ++----
cpu/ppc4xx/tlb.c | 88 ++-
cpu/ppc4xx/usb.c | 18 +-
cpu/ppc4xx/vecnum.h | 104 +++
dtt/ds1775.c | 2 +-
include/405_mal.h | 4 +-
include/4xx_i2c.h | 2 +-
include/{405gp_pci.h => asm-ppc/4xx_pci.h} | 0
include/asm-ppc/4xx_pcie.h | 336 +++++++
include/asm-ppc/cache.h | 21 +-
include/asm-ppc/global_data.h | 3 +
include/asm-ppc/gpio.h | 35 +
include/asm-ppc/mmu.h | 1 +
include/asm-ppc/processor.h | 9 +
include/asm-ppc/u-boot.h | 1 +
include/bcd.h | 20 +
include/common.h | 10 +-
include/configs/ADCIOP.h | 9 -
include/configs/AP1000.h | 8 -
include/configs/AR405.h | 10 -
include/configs/ASH405.h | 10 -
include/configs/CANBT.h | 9 -
include/configs/CMS700.h | 10 -
include/configs/CPCI2DP.h | 10 -
include/configs/CPCI405.h | 9 -
include/configs/CPCI4052.h | 10 -
include/configs/CPCI405AB.h | 10 -
include/configs/CPCI405DT.h | 10 -
include/configs/CPCI440.h | 9 -
include/configs/CPCIISER4.h | 9 -
include/configs/CRAYL1.h | 6 -
include/configs/DASA_SIM.h | 9 -
include/configs/DP405.h | 10 -
include/configs/DU405.h | 9 -
include/configs/ERIC.h | 8 -
include/configs/EXBITGEN.h | 4 -
include/configs/G2000.h | 10 -
include/configs/HH405.h | 10 -
include/configs/HUB405.h | 10 -
include/configs/JSE.h | 9 -
include/configs/KAREF.h | 8 -
include/configs/METROBOX.h | 8 -
include/configs/MIP405.h | 9 -
include/configs/ML2.h | 8 -
include/configs/OCRTC.h | 9 -
include/configs/ORSG.h | 9 -
include/configs/PCI405.h | 9 -
include/configs/PIP405.h | 9 -
include/configs/PLU405.h | 10 -
include/configs/PMC405.h | 10 -
include/configs/PPChameleonEVB.h | 10 -
include/configs/VOH405.h | 10 -
include/configs/VOM405.h | 10 -
include/configs/W7OLMC.h | 9 -
include/configs/W7OLMG.h | 9 -
include/configs/WUH405.h | 10 -
include/configs/XPEDITE1K.h | 8 -
include/configs/acadia.h | 9 -
include/configs/alpr.h | 6 -
include/configs/bamboo.h | 9 -
include/configs/bubinga.h | 8 -
include/configs/csb272.h | 8 -
include/configs/csb472.h | 8 -
include/configs/ebony.h | 8 -
include/configs/hcu4.h | 7 -
include/configs/hcu5.h | 7 -
include/configs/katmai.h | 16 +-
include/configs/kilauea.h | 525 +++++++++++
include/configs/luan.h | 9 -
include/configs/lwmon5.h | 11 +-
include/configs/makalu.h | 399 +++++++++
include/configs/ml300.h | 6 -
include/configs/ocotea.h | 8 -
include/configs/p3p440.h | 8 -
include/configs/pcs440ep.h | 11 +-
include/configs/sbc405.h | 10 -
include/configs/sc3.h | 18 -
include/configs/sequoia.h | 26 +-
include/configs/taihu.h | 52 +-
include/configs/taishan.h | 9 -
include/configs/walnut.h | 10 -
include/configs/yosemite.h | 18 +-
include/configs/yucca.h | 14 +-
include/configs/zeus.h | 7 -
include/ppc405.h | 932 +++++++++++++-------
include/ppc440.h | 123 +---
include/ppc4xx.h | 73 ++-
include/ppc4xx_enet.h | 17 +-
include/serial.h | 5 +-
lib_ppc/cache.c | 2 +-
nand_spl/board/amcc/acadia/Makefile | 6 +-
nand_spl/board/amcc/bamboo/sdram.c | 6 +
nand_spl/board/amcc/kilauea/Makefile | 108 +++
nand_spl/board/amcc/kilauea/config.mk | 47 +
nand_spl/board/amcc/kilauea/u-boot.lds | 64 ++
post/cpu/ppc4xx/cache.c | 4 +
post/cpu/ppc4xx/ether.c | 47 +-
post/cpu/ppc4xx/uart.c | 15 +-
post/lib_ppc/cpu.c | 11 +
rtc/Makefile | 2 +-
rtc/x1205.c | 178 ++++
207 files changed, 7050 insertions(+), 3004 deletions(-)
create mode 100644 board/amcc/kilauea/Makefile
create mode 100644 board/amcc/kilauea/cmd_pll.c
create mode 100644 board/amcc/kilauea/config.mk
create mode 100644 board/amcc/kilauea/init.S
create mode 100644 board/amcc/kilauea/kilauea.c
create mode 100644 board/amcc/kilauea/memory.c
copy board/amcc/{yucca/u-boot.lds.debug => kilauea/u-boot-nand.lds} (72%)
copy board/amcc/{yucca/u-boot.lds.debug => kilauea/u-boot.lds} (70%)
create mode 100644 board/amcc/makalu/Makefile
create mode 100644 board/amcc/makalu/cmd_pll.c
create mode 100644 board/amcc/makalu/config.mk
create mode 100644 board/amcc/makalu/init.S
create mode 100644 board/amcc/makalu/makalu.c
create mode 100644 board/amcc/makalu/memory.c
rename board/amcc/{yucca/u-boot.lds.debug => makalu/u-boot.lds} (70%)
delete mode 100644 cpu/ppc4xx/440spe_pcie.h
rename cpu/ppc4xx/{405gp_pci.c => 4xx_pci.c} (98%)
rename cpu/ppc4xx/{440spe_pcie.c => 4xx_pcie.c} (54%)
rename cpu/ppc4xx/{serial.c => 4xx_uart.c} (56%)
create mode 100644 cpu/ppc4xx/cache.S
create mode 100644 cpu/ppc4xx/fdt.c
create mode 100644 cpu/ppc4xx/iop480_uart.c
rename include/{405gp_pci.h => asm-ppc/4xx_pci.h} (100%)
create mode 100644 include/asm-ppc/4xx_pcie.h
create mode 100644 include/bcd.h
create mode 100644 include/configs/kilauea.h
create mode 100644 include/configs/makalu.h
create mode 100644 nand_spl/board/amcc/kilauea/Makefile
create mode 100644 nand_spl/board/amcc/kilauea/config.mk
create mode 100644 nand_spl/board/amcc/kilauea/u-boot.lds
create mode 100644 rtc/x1205.c[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
Quoted 11 lines · Stefan Roese
Wolfgang, please pull the 4xx changes from the u-boot-ppc4xx master branch.
Unfortunately I couldn't create a complete list of changes as done usually, since I merge multiple times with mainline. Then "git-request-pull" isn't useful anymore to create a list of changes only present in the local repository. It creates a list of changes which also included patches from the mainline repo. Perhaps somebody else with more "git-knowledge" can help out here and tell me how to create such a git-shortlog which only includes the local changes.
Quoted 1 line
Thanks.
Hi Stefan,
What I've been doing which works well is to create a local branch (i.e. no need to push back to denx.de) in my local repo named "uboot" (I removed the "-" in "u-boot" because I'm lazy and git makes you use "--" if there is a dash in the branch name). I pull the u-boot mainline changes into this "uboot" branch and then rebase "master" against "uboot". Note that this naming, pulling, and rebasing method can be extended to other sub-repos such as "uboottesting" or "ubootfdt" to maintain changes rebased against other sub-repos.
This prevents the intermixing of "official" patches and improvement patches which happens if you do a pull of u-boot repo directly into your "master" branch.
This is simply an inversion of my original method, which was to pull u-boot master changes into the "master" branch and keep improvements in a different branch ("merge") that I rebased against the "master" branch.
Time to update the Custodians page...
Best regards and have a great new year,
gvb
[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
In reply to Stefan RoeseQuoted 8 lines · In message <[email protected]> you wrote:
The following changes since commit
49801028715cd8bc22863cdfc0ee7919b7a6af4b:
Stefan Roese (1):
Mergegit://www.denx.de/git/u-bootare available in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.gitmaster
Merged. Thanks.
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "The lesser of two evils -- is evil." - Seymour (Sy) Leon
[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
In reply to Stefan RoeseThe following changes since commit 5c740711f0ea5b51414b341b71597c4a0751be74:
Jon Loeliger (1):
8610: Move include of config.h earlier.
are available in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.git master
Larry Johnson (4):
PPC4xx: Use common code for Sequoia board SDRAM support
PPC4xx: Remove sdram.h from board/amcc/sequoia
PPC4xx: Use common code for LWMON5 board SDRAM support
PPC4xx: Remove sdram.h from board/lwmon5
Lawrence R. Johnson (3):
ppc4xx: Add functionality to GPIO support
ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Sequoia board
ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Korat board
Matthias Fuchs (3):
ppc4xx: More cleanup for esd's LCD code
ppc4xx: use common denali core defines and data eye search code for PMC440
ppc4xx: Remove sdram.h from PMC440 board
Stefan Roese (1):
ppc4xx: Fix Sequoia NAND booting target
board/amcc/sequoia/sdram.c | 344 +----------------------- board/amcc/sequoia/sdram.h | 505 ---------------------------------- board/amcc/sequoia/sequoia.c | 31 +-- board/esd/common/lcd.c | 38 ++-- board/esd/pmc440/sdram.c | 342 +----------------------- board/esd/pmc440/sdram.h | 505 ---------------------------------- board/korat/korat.c | 117 +-------- board/lwmon5/sdram.c | 357 ++----------------------- board/lwmon5/sdram.h | 505 ---------------------------------- cpu/ppc4xx/gpio.c | 63 +++-- include/asm-ppc/gpio.h | 1 + include/configs/korat.h | 153 ++++++++++- include/configs/sequoia.h | 77 +++++ nand_spl/board/amcc/sequoia/Makefile | 6 +- 14 files changed, 333 insertions(+), 2711 deletions(-) delete mode 100644 board/amcc/sequoia/sdram.h delete mode 100644 board/esd/pmc440/sdram.h delete mode 100644 board/lwmon5/sdram.h
[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
The following changes since commit 5c740711f0ea5b51414b341b71597c4a0751be74:
Jon Loeliger (1):
8610: Move include of config.h earlier.
are available in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.git master
Larry Johnson (5):
PPC4xx: Use common code for Sequoia board SDRAM support
PPC4xx: Remove sdram.h from board/amcc/sequoia
PPC4xx: Use common code for LWMON5 board SDRAM support
PPC4xx: Remove sdram.h from board/lwmon5
ppc4xx: Remove weak binding from common Denali data-eye search code
Lawrence R. Johnson (3):
ppc4xx: Add functionality to GPIO support
ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Sequoia board
ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Korat board
Matthias Fuchs (3):
ppc4xx: More cleanup for esd's LCD code
ppc4xx: use common denali core defines and data eye search code for PMC440
ppc4xx: Remove sdram.h from PMC440 board
Stefan Roese (4):
ppc4xx: Fix Sequoia NAND booting target
ppc4xx: Update Katmai/44x_spd_ddr2.c code for optimal DDR2 setup
ppc4xx: Remove unused CONFIG_ECC_ERROR_RESET from 44x_spd_ddr2.c Merge branch 'katmai-ddr-gda'
board/amcc/katmai/katmai.c | 14 +- board/amcc/sequoia/sdram.c | 344 +----------------------- board/amcc/sequoia/sdram.h | 505 ---------------------------------- board/amcc/sequoia/sequoia.c | 31 +-- board/esd/common/lcd.c | 38 ++-- board/esd/pmc440/sdram.c | 342 +----------------------- board/esd/pmc440/sdram.h | 505 ---------------------------------- board/korat/korat.c | 117 +-------- board/lwmon5/sdram.c | 357 ++----------------------- board/lwmon5/sdram.h | 505 ---------------------------------- cpu/ppc4xx/44x_spd_ddr2.c | 96 +++---- cpu/ppc4xx/denali_data_eye.c | 7 - cpu/ppc4xx/gpio.c | 63 +++-- include/asm-ppc/gpio.h | 1 + include/configs/katmai.h | 1 + include/configs/korat.h | 153 ++++++++++- include/configs/sequoia.h | 77 +++++ include/ppc440.h | 12 +- nand_spl/board/amcc/sequoia/Makefile | 6 +- 19 files changed, 394 insertions(+), 2780 deletions(-) delete mode 100644 board/amcc/sequoia/sdram.h delete mode 100644 board/esd/pmc440/sdram.h delete mode 100644 board/lwmon5/sdram.h
[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
Quoted 7 lines · In message <[email protected]> you wrote:
The following changes since commit
5c740711f0ea5b51414b341b71597c4a0751be74:
Jon Loeliger (1):
8610: Move include ofconfig.hearlier.are available in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.gitmaster
Done.
Best regards,
Wolfgang Denk
Signature · 4 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de I am a computer. I am dumber than any human and smarter than any ad- ministrator.
[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
In reply to Stefan RoeseThe following changes since commit 74ac5facb988fc488a707db228b177ead63a6541:
Wolfgang Denk (1):
Merge branch 'inka4x0-ng' of /home/m8/git/u-boot/
are available in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.git master
Matthias Fuchs (5):
ppc4xx: Disable error message when no NAND chip is installed on PMC440
ppc4xx: Update PLB/PCI divider for PMC440 board
ppc4xx: Fix UIC2 vector number base
ppc4xx: Move cpu/ppc4xx/vecnum.h into include path
ppc4xx: assign PCI interrupts on seuqoia boards
Stefan Roese (6):
ppc4xx: Return 0 on success in 4xx ethernet driver
ppc4xx: Add 44x cache locking to better support init-ram in d-cache
ppc4xx: Add CFG_POST_ALT_WORD_ADDR to support non OCM POST WORD storage
ppc4xx: Change LWMON5 to not use OCM for init-ram and POST anymore
POST: Execute SPR test after relocation
Merge branch 'lwmon5-no-ocm'
board/amcc/sequoia/sequoia.c | 14 +++++ board/esd/pmc440/cmd_pmc440.c | 4 +- board/lwmon5/init.S | 2 +- cpu/ppc4xx/4xx_enet.c | 7 ++- cpu/ppc4xx/4xx_uart.c | 2 +- cpu/ppc4xx/commproc.c | 14 +++++- cpu/ppc4xx/interrupts.c | 2 +- cpu/ppc4xx/iop480_uart.c | 2 +- cpu/ppc4xx/start.S | 52 ++++++++++++++++++++ cpu/ppc4xx/usbdev.c | 2 +- .../vecnum.h => include/asm-ppc/ppc4xx-intvec.h | 32 ++++++------ include/configs/PMC440.h | 3 + include/configs/lwmon5.h | 19 +++++--- include/ppc440.h | 4 +- post/tests.c | 2 +- 15 files changed, 123 insertions(+), 38 deletions(-) rename cpu/ppc4xx/vecnum.h => include/asm-ppc/ppc4xx-intvec.h (95%)
[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
Quoted 15 lines · In message <[email protected]> you wrote:
The following changes since commit
74ac5facb988fc488a707db228b177ead63a6541:
Wolfgang Denk (1):
Merge branch 'inka4x0-ng' of/home/m8/git/u-boot/are available in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.gitmasterMatthias Fuchs (5):
ppc4xx: Disable error message when no NAND chip is installed on PMC440
ppc4xx: Update PLB/PCI divider for PMC440 board
ppc4xx: Fix UIC2 vector number base
ppc4xx: Movecpu/ppc4xx/vecnum.hinto include path
ppc4xx: assign PCI interrupts on seuqoia boards
Quoted 7 lines
Stefan Roese (6):
ppc4xx: Return 0 on success in 4xx ethernet driver
ppc4xx: Add 44x cache locking to better support init-ram in d-cache
ppc4xx: AddCFG_POST_ALT_WORD_ADDRto support non OCM POST WORD storage
ppc4xx: Change LWMON5 to not use OCM for init-ram and POST anymore
POST: Execute SPR test after relocation
Merge branch 'lwmon5-no-ocm'
Done.
Best regards,
Wolfgang Denk
Signature · 6 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
KLB is an acronym for `Known Lazy Bastard', aka non-FAQ reader, aka
person who would rather make someone take their time to explain
something basic than look it up in a FAQ.
-- Tom Christiansen in <[email protected]>[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
In reply to Stefan RoeseQuoted 32 lines · Stefan Roese
The following changes since commit
74ac5facb988fc488a707db228b177ead63a6541:
Wolfgang Denk (1):
Merge branch 'inka4x0-ng' of/home/m8/git/u-boot/are available in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.gitmasterMatthias Fuchs (5):
ppc4xx: Disable error message when no NAND chip is installed on PMC440
ppc4xx: Update PLB/PCI divider for PMC440 board
ppc4xx: Fix UIC2 vector number base
ppc4xx: Movecpu/ppc4xx/vecnum.hinto include path
ppc4xx: assign PCI interrupts on seuqoia boardsStefan Roese (6):
ppc4xx: Return 0 on success in 4xx ethernet driver
ppc4xx: Add 44x cache locking to better support init-ram in d-cache
ppc4xx: AddCFG_POST_ALT_WORD_ADDRto support non OCM POST WORD storage
ppc4xx: Change LWMON5 to not use OCM for init-ram and POST anymore
POST: Execute SPR test after relocation
Merge branch 'lwmon5-no-ocm'board/amcc/sequoia/sequoia.c | 14 +++++ board/esd/pmc440/cmd_pmc440.c | 4 +- board/lwmon5/init.S | 2 +- cpu/ppc4xx/4xx_enet.c | 7 ++- cpu/ppc4xx/4xx_uart.c | 2 +- cpu/ppc4xx/commproc.c | 14 +++++- cpu/ppc4xx/interrupts.c | 2 +- cpu/ppc4xx/iop480_uart.c | 2 +- cpu/ppc4xx/start.S | 52 ++++++++++++++++++++
Quoted 8 lines
cpu/ppc4xx/usbdev.c | 2 +- .../vecnum.h => include/asm-ppc/ppc4xx-intvec.h | 32 ++++++------ include/configs/PMC440.h | 3 + include/configs/lwmon5.h | 19 +++++--- include/ppc440.h | 4 +- post/tests.c | 2 +- 15 files changed, 123 insertions(+), 38 deletions(-) rename cpu/ppc4xx/vecnum.h => include/asm-ppc/ppc4xx-intvec.h (95%)
Hi Stefan,
Are the changes for LWMON5 recommended for Sequoia and other 440EPx boards?
BTW, I tried to check to see if these patches had been posted to the mailing list. For some reason, the mailing-list archive at sourceforge.net, but it doesn't appear to have any postings after 17 December.
Best regards,
Larry
[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
Hi Larry,
Quoted 2 lines · Larry Johnson
Are the changes for LWMON5 recommended for Sequoia and other 440EPx boards?
No. It's a special case, where we need the OCM for the logbuffer.
Quoted 2 lines
BTW, I tried to check to see if these patches had been posted to the mailing list.
Ahh, bad habit. Sorry, but most of the time I forget to send internal 4xx patches to the list. I'll try to change this and send the patches to the list too.
Quoted 3 lines
For some reason, the mailing-list archive at sourceforge.net, but it doesn't appear to have any postings after 17 December.
No idea. I have not looked at sourceforge for a long time.
The changes are already present in the official U-Boot repository. You can take a look at them there.
Best regards,
Stefan
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
In reply to Larry JohnsonLarry Johnson wrote:
[snip]
Quoted 7 lines
BTW, I tried to check to see if these patches had been posted to the mailing list. For some reason, the mailing-list archive at sourceforge.net, but it doesn't appear to have any postings after 17 December.
Best regards,
Larry
Hi Larry,
FWIIW, I generally use gmane.org to search the mail list. Sourceforge tends to be slow and lame when it isn't actually broken.
<http://dir.gmane.org/gmane.comp.boot-loaders.u-boot>
Best regards,
gvb
[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
In reply to Stefan RoeseThe following changes since commit fe891ecf4d187e9d11dde869ed4623af52b54451:
Hiroshi Ito (1):
NFS Timeout with large files.
are available in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.git master
Larry Johnson (1):
ppc4xx: Add CONFIG_4xx_DCACHE compile switch to Denali-core SPD code
Niklaus Giger (1):
ppc4xx: HCU4/5. Fix make O=../xx
Stefan Roese (4):
ppc4xx: Fix problem with init-ram bigger than 4k on 440 platforms
ppc4xx: Fix GPIO configuration for pcs440ep
ppc4xx: Fix ndfc HW ECC byte order
Merge branch 'for-1.3.2'
Makefile | 2 ++ board/netstal/hcu4/Makefile | 12 ++++-------- board/netstal/hcu5/Makefile | 10 ++++------ board/pcs440ep/pcs440ep.c | 2 +- cpu/ppc4xx/denali_spd_ddr2.c | 6 +++--- cpu/ppc4xx/ndfc.c | 4 ++-- cpu/ppc4xx/start.S | 4 ++++ include/configs/pcs440ep.h | 2 +- include/configs/yosemite.h | 2 +- 9 files changed, 22 insertions(+), 22 deletions(-)
Wolfgang Denk
Applied[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
Quoted 11 lines · In message <[email protected]> you wrote:
The following changes since commit
fe891ecf4d187e9d11dde869ed4623af52b54451:
Hiroshi Ito (1):
NFS Timeout with large files.are available in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.gitmasterLarry Johnson (1):
ppc4xx: AddCONFIG_4xx_DCACHEcompile switch to Denali-core SPD code
Quoted 8 lines
Niklaus Giger (1):
ppc4xx: HCU4/5. Fix make O=../xxStefan Roese (4):
ppc4xx: Fix problem with init-ram bigger than 4k on 440 platforms
ppc4xx: Fix GPIO configuration for pcs440ep
ppc4xx: Fix ndfc HW ECC byte order
Merge branch 'for-1.3.2'
Applied, thanks.
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de The complexity of software is an essential property, not an acciden- tal one. Hence, descriptions of a software entity that abstract away its complexity often abstract away its essence. - Fred Brooks, Jr.
[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
In reply to Stefan RoeseThe following changes since commit 5db6138565ad4da190f94e0bc1d89407d58a2ab2:
Wolfgang Denk (1):
Merge branch 'master' of git://www.denx.de/git/u-boot-arm
are available in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.git master
Larry Johnson (1):
ppc4xx: Beautify configuration files for Sequoia and Korat boards
Mike Nuss (1):
PPC440EPx: Optionally enable second I2C bus
Niklaus Giger (3):
ppc4xx: PPC405GPr fix missing register definitions
ppc4xx: HCU4/5. Cleanups
ppc4xx: HCU4/5. Cleanup configs
board/amcc/sequoia/sequoia.c | 5 +- board/netstal/common/fixed_sdram.c | 2 +- board/netstal/common/hcu_flash.c | 14 -- board/netstal/common/nm.h | 11 ++- board/netstal/common/nm_bsp.c | 4 +- board/netstal/hcu4/hcu4.c | 80 ++++++------- board/netstal/hcu5/hcu5.c | 8 +- board/netstal/hcu5/sdram.c | 32 +++-- include/configs/hcu4.h | 26 ++--- include/configs/hcu5.h | 47 +++---- include/configs/korat.h | 234 ++++++++++++++++++----------------- include/configs/sequoia.h | 238 ++++++++++++++++++------------------ include/ppc405.h | 8 ++ 13 files changed, 346 insertions(+), 363 deletions(-)
[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
Quoted 11 lines · In message <[email protected]> you wrote:
The following changes since commit
5db6138565ad4da190f94e0bc1d89407d58a2ab2:
Wolfgang Denk (1):
Merge branch 'master' ofgit://www.denx.de/git/u-boot-armare available in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.gitmasterLarry Johnson (1):
ppc4xx: Beautify configuration files for Sequoia and Korat boards
Quoted 7 lines
Mike Nuss (1):
PPC440EPx: Optionally enable second I2C busNiklaus Giger (3):
ppc4xx: PPC405GPr fix missing register definitions
ppc4xx: HCU4/5. Cleanups
ppc4xx: HCU4/5. Cleanup configs
Done, thanks.
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de This cultural mystique surrounding the biological function -- you realize humans are overly preoccupied with the subject. -- Kelinda the Kelvan, "By Any Other Name", stardate 4658.9
[U-Boot-Users] [cfi-flash] Please pull git://www.denx.de/git/u-boot-cfi-flash.git
In reply to Stefan RoeseThe following changes since commit 928d1d77f8623c120d8763e20e1ca58df9c5c4c6:
Yuri Tikhonov (1):
Fix CPU POST test failure
are available in the git repository at:
git://www.denx.de/git/u-boot-cfi-flash.git master
Michael Schwingen (1):
CFI: Do not use uninitialized cmd_reset
drivers/mtd/cfi_flash.c | 7 ++++++- 1 files changed, 6 insertions(+), 1 deletions(-)
[U-Boot-Users] [cfi-flash] Please pull git://www.denx.de/git/u-boot-cfi-flash.git
Quoted 6 lines · In message <[email protected]> you wrote:
The following changes since commit
928d1d77f8623c120d8763e20e1ca58df9c5c4c6:
Yuri Tikhonov (1):
Fix CPU POST test failureare available in the git repository at:
Quoted 7 lines
git://www.denx.de/git/u-boot-cfi-flash.gitmasterMichael Schwingen (1):
CFI: Do not use uninitializedcmd_resetdrivers/mtd/cfi_flash.c | 7 ++++++- 1 files changed, 6 insertions(+), 1 deletions(-)
Done, thanks.
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Our business is run on trust. We trust you will pay in advance.
[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
In reply to Stefan RoeseThe following changes since commit b29661fc1151077776454288051bc9a488351ce8:
Wolfgang Denk (1):
Coding style cleanup. Prepare v1.3.2-rc2 release candidate
are available in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.git master
Stefan Roese (1):
ppc4xx: Fix acadia_nand build problem
board/amcc/acadia/memory.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-)
[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
Quoted 6 lines · In message <[email protected]> you wrote:
The following changes since commit
b29661fc1151077776454288051bc9a488351ce8:
Wolfgang Denk (1):
Coding style cleanup. Prepare v1.3.2-rc2 release candidateare available in the git repository at:
Quoted 7 lines
git://www.denx.de/git/u-boot-ppc4xx.gitmasterStefan Roese (1):
ppc4xx: Fixacadia_nandbuild problemboard/amcc/acadia/memory.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-)
Done, thanks.
Best regards,
Wolfgang Denk
Signature · 8 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Politician: An eel in the fundamental mud upon which the superstructure of organized society is reared. When he wriggles he mistakes the agitation of his tail for the trembling of the edifice. As compared with the statesman, he suffers the disadvantage of being alive. - Ambrose Bierce
[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
In reply to Stefan RoeseThe following changes since commit 848e03110c0facf3800ea15fdc38e505248ee282:
Stefan Roese (1):
Merge branch 'master' of /home/stefan/git/u-boot/u-boot
are available in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.git master
Markus Brunner (1):
fix taihu soft spi_read
Stefan Roese (1):
ppc4xx: Sequoia: Add device tree (fdt) Linux booting default env variables
board/amcc/taihu/taihu.c | 2 +- include/configs/sequoia.h | 24 +++++++++++++++++------- 2 files changed, 18 insertions(+), 8 deletions(-)
[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
Quoted 11 lines · In message <[email protected]> you wrote:
The following changes since commit
848e03110c0facf3800ea15fdc38e505248ee282:
Stefan Roese (1):
Merge branch 'master' of/home/stefan/git/u-boot/u-bootare available in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.gitmasterMarkus Brunner (1):
fix taihu softspi_read
Quoted 6 lines
Stefan Roese (1):
ppc4xx: Sequoia: Add device tree (fdt) Linux booting default env variablesboard/amcc/taihu/taihu.c | 2 +- include/configs/sequoia.h | 24 +++++++++++++++++------- 2 files changed, 18 insertions(+), 8 deletions(-)
Done, thanks.
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Don't hit a man when he's down - kick him; it's easier.
[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
In reply to Stefan RoeseThe following changes since commit b8aa57b5d4d69e8f0810a5e632c0ce41c0f46ee0:
Wolfgang Denk (1):
tools/setlocalversion: use a git-describe-ish format
are available in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.git master
Niklaus Giger (5):
ppc4xx: HCU4/5. Use FLASH_CFI_LEGACY
ppc4xx: HCU4/5. remove obsolete hcu_flash.c
ppc4xx: Add 405GPr based MCU25 board. Global files
ppc4xx: Add 405GPr based MCU25 board config file
ppc4xx: Add 405GPr based MCU25 board specific files
Stefan Roese (16):
ppc4xx: Fix comment in 405EX DDR2 init code
rtc: Add M41T62 support
ppc4xx: miiphy.c reworked
ppc4xx: program_tlb now uses 64bit physical addess
ppc4xx: interrupt.c reworked
ppc4xx: Add basic support for AMCC 460EX/460GT (1/5)
ppc4xx: Add basic support for AMCC 460EX/460GT (2/5)
ppc4xx: Add basic support for AMCC 460EX/460GT (3/5)
ppc4xx: Add basic support for AMCC 460EX/460GT (4/5)
ppc4xx: Add basic support for AMCC 460EX/460GT (5/5)
ppc4xx: Add AMCC Canyonlands support (460EX) (1/3)
ppc4xx: Add AMCC Canyonlands support (460EX) (2/3)
ppc4xx: Add AMCC Canyonlands support (460EX) (3/3)
ppc4xx: Add Canyonlands NAND booting support
usb: Add CFG_OHCI_USE_NPS to common USB-OHCI driver
ppc4xx: Add USB OHCI support to AMCC Canyonlands 460EX eval board
MAINTAINERS | 2 + MAKEALL | 3 + Makefile | 15 + board/amcc/canyonlands/Makefile | 52 +++ board/amcc/canyonlands/bootstrap.c | 170 ++++++++ board/amcc/canyonlands/canyonlands.c | 418 ++++++++++++++++++ board/amcc/canyonlands/config.mk | 49 +++ board/amcc/canyonlands/init.S | 122 ++++++ board/amcc/canyonlands/u-boot-nand.lds | 137 ++++++ board/amcc/canyonlands/u-boot.lds | 146 +++++++ board/amcc/kilauea/init.S | 4 +- board/amcc/makalu/init.S | 4 +- board/netstal/common/hcu_flash.c | 514 ---------------------- board/netstal/hcu4/Makefile | 2 +- board/netstal/hcu4/hcu4.c | 16 + board/netstal/hcu5/Makefile | 2 +- board/netstal/hcu5/hcu5.c | 16 + board/netstal/hcu5/sdram.c | 2 - board/netstal/mcu25/Makefile | 51 +++ board/netstal/mcu25/README.txt | 60 +++ board/netstal/mcu25/config.mk | 29 ++ board/netstal/mcu25/mcu25.c | 218 ++++++++++ board/netstal/mcu25/u-boot.lds | 141 ++++++ cpu/ppc4xx/44x_spd_ddr2.c | 41 ++- cpu/ppc4xx/4xx_enet.c | 369 +++++++++++++--- cpu/ppc4xx/4xx_pci.c | 9 +- cpu/ppc4xx/4xx_pcie.c | 203 +++++++++- cpu/ppc4xx/4xx_uart.c | 24 +- cpu/ppc4xx/cpu.c | 45 ++- cpu/ppc4xx/cpu_init.c | 1 + cpu/ppc4xx/interrupts.c | 589 ++++++------------------- cpu/ppc4xx/miiphy.c | 196 ++++----- cpu/ppc4xx/ndfc.c | 3 +- cpu/ppc4xx/speed.c | 125 ++++++- cpu/ppc4xx/start.S | 19 +- cpu/ppc4xx/tlb.c | 27 +- drivers/rtc/Makefile | 1 + drivers/rtc/m41t62.c | 135 ++++++ drivers/usb/usb_ohci.c | 5 +- include/405_mal.h | 1 + include/4xx_i2c.h | 3 +- include/asm-ppc/4xx_pcie.h | 79 ++++- include/asm-ppc/gpio.h | 5 +- include/asm-ppc/mmu.h | 18 +- include/asm-ppc/ppc4xx-intvec.h | 71 +++ include/asm-ppc/processor.h | 4 + include/asm-ppc/u-boot.h | 6 +- include/common.h | 4 +- include/configs/canyonlands.h | 567 ++++++++++++++++++++++++ include/configs/hcu4.h | 18 +- include/configs/hcu5.h | 14 +- include/configs/mcu25.h | 362 ++++++++++++++++ include/ppc405.h | 23 +- include/ppc440.h | 593 ++++++++++++++++++++++---- include/ppc4xx_enet.h | 18 +- nand_spl/board/amcc/canyonlands/Makefile | 105 +++++ nand_spl/board/amcc/canyonlands/config.mk | 49 +++ nand_spl/board/amcc/canyonlands/ddr2_fixed.c | 96 +++++ nand_spl/board/amcc/canyonlands/u-boot.lds | 65 +++ post/cpu/ppc4xx/cache.c | 2 - 60 files changed, 4740 insertions(+), 1328 deletions(-) create mode 100644 board/amcc/canyonlands/Makefile create mode 100644 board/amcc/canyonlands/bootstrap.c create mode 100644 board/amcc/canyonlands/canyonlands.c create mode 100644 board/amcc/canyonlands/config.mk create mode 100644 board/amcc/canyonlands/init.S create mode 100644 board/amcc/canyonlands/u-boot-nand.lds create mode 100644 board/amcc/canyonlands/u-boot.lds delete mode 100644 board/netstal/common/hcu_flash.c create mode 100644 board/netstal/mcu25/Makefile create mode 100644 board/netstal/mcu25/README.txt create mode 100644 board/netstal/mcu25/config.mk create mode 100644 board/netstal/mcu25/mcu25.c create mode 100644 board/netstal/mcu25/u-boot.lds create mode 100644 drivers/rtc/m41t62.c create mode 100644 include/configs/canyonlands.h create mode 100644 include/configs/mcu25.h create mode 100644 nand_spl/board/amcc/canyonlands/Makefile create mode 100644 nand_spl/board/amcc/canyonlands/config.mk create mode 100644 nand_spl/board/amcc/canyonlands/ddr2_fixed.c create mode 100644 nand_spl/board/amcc/canyonlands/u-boot.lds
[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
Quoted 7 lines · In message <[email protected]> you wrote:
The following changes since commit
b8aa57b5d4d69e8f0810a5e632c0ce41c0f46ee0:
Wolfgang Denk (1):
tools/setlocalversion: use a git-describe-ish formatare available in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.gitmaster
Well, but:
...
Quoted 3 lines
Stefan Roese (16):
ppc4xx: Fix comment in 405EX DDR2 init code
rtc: Add M41T62 support
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
This is NOT a ppc4xx related patch. You are NOT supposed to sneak this in through your ppc4xx custodian repo.
Quoted 5 lines
ppc4xx:
miiphy.creworked
ppc4xx:program_tlbnow uses 64bit physical addess
ppc4xx:interrupt.creworked
ppc4xx: Add basic support for AMCC 460EX/460GT (1/5)
ppc4xx: Add basic support for AMCC 460EX/460GT (2/5)
Quoted 8 lines
ppc4xx: Add basic support for AMCC 460EX/460GT (3/5)
ppc4xx: Add basic support for AMCC 460EX/460GT (4/5)
ppc4xx: Add basic support for AMCC 460EX/460GT (5/5)
ppc4xx: Add AMCC Canyonlands support (460EX) (1/3)
ppc4xx: Add AMCC Canyonlands support (460EX) (2/3)
ppc4xx: Add AMCC Canyonlands support (460EX) (3/3)
ppc4xx: Add Canyonlands NAND booting support
usb: AddCFG_OHCI_USE_NPSto common USB-OHCI driver
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
This is a USB related patch. You are supposed to run this through the USB custodian.
Done, but for the future please don't add unrelated changes to your custodian repo. Thanks.
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Bus error -- please leave by the rear door.
[U-Boot-Users] [cfi-flash] Please pull git://www.denx.de/git/u-boot-cfi-flash.git
In reply to Stefan RoeseThe following changes since commit 23e20aa6488e6c0622496549861bfdc74108debe:
Yuri Tikhonov (1):
lwmon5: Fix register test logic to match the specific GDC h/w.
are available in the git repository at:
git://www.denx.de/git/u-boot-cfi-flash.git master
Jerry Van Baren (1):
Flash programming progress countdown.
Stefan Roese (1):
CFI: Small cleanup for FLASH_SHOW_PROGRESS
README | 5 +++++ drivers/mtd/cfi_flash.c | 40 +++++++++++++++++++++++++++++++++++++++- 2 files changed, 44 insertions(+), 1 deletions(-)
[U-Boot-Users] [cfi-flash] Please pull git://www.denx.de/git/u-boot-cfi-flash.git
Quoted 6 lines · In message <[email protected]> you wrote:
The following changes since commit
23e20aa6488e6c0622496549861bfdc74108debe:
Yuri Tikhonov (1):
lwmon5: Fix register test logic to match the specific GDC h/w.are available in the git repository at:
Quoted 7 lines
git://www.denx.de/git/u-boot-cfi-flash.gitmasterJerry Van Baren (1):
Flash programming progress countdown.Stefan Roese (1):
CFI: Small cleanup forFLASH_SHOW_PROGRESS
Done. Thanks.
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de FORTRAN? The syntactically incorrect statement "DO 10 I = 1.10" will parse and generate code creating a variable, DO10I, as follows: "DO10I = 1.10" If that doesn't terrify you, it should.
[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
In reply to Stefan RoeseThe following changes since commit 234ea73c660cfd0b1c98de00995c32d4152d202f:
Wolfgang Denk (1):
Merge branch 'master' of git+ssh://10.10.0.7/home/wd/git/u-boot/master
are available in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.git master
Larry Johnson (1):
ppc4xx: Updates to Korat-specific code
Markus Brunner (1):
ppc4xx: PPC405EP Set EMAC noise filter bits
Mike Nuss (1):
ppc4xx: Reconfigure PLL for 667MHz processor for PPC440EPx
Pieter Voorthuijsen (1):
ppc4xx: Enable cache support on the ALPR board
Stefan Roese (9):
ppc4xx: Mask 'vec' with 0x1f in uic_interrupt() for bit set/clear
ppc4xx: Add AMCC Glacier 406GT eval board support
ppc4xx: Fix compilation warning in 4xx_enet.c
ppc4xx: Correctly pass phyiscal FLASH base address into dtb
ppc4xx: Fix Canyonlands linker script (remove bogus ASSERT)
ppc: Add CFG_MEM_TOP_HIDE option to hide memory area that doesn't get "touched"
ppc4xx: Add fdt support to Prodrive alpr
ppc: Set CFG_MEM_TOP_HIDE to 0 if not already defined
ppc4xx: Enable ECC on LWMON5
MAINTAINERS | 1 + MAKEALL | 1 + Makefile | 9 +- README | 21 +++ board/amcc/canyonlands/canyonlands.c | 27 +++-- board/amcc/canyonlands/u-boot.lds | 2 - board/korat/config.mk | 16 ++- board/korat/init.S | 31 ++++-- board/korat/korat.c | 232 ++++++++++++++++++++++++++++------ board/korat/u-boot-F7FC.lds | 143 +++++++++++++++++++++ board/lwmon5/sdram.c | 90 +++---------- board/prodrive/alpr/alpr.c | 25 ++++- board/prodrive/alpr/init.S | 9 ++ cpu/ppc4xx/4xx_enet.c | 56 ++++++++- cpu/ppc4xx/cpu_init.c | 102 +++++++++++++++- cpu/ppc4xx/interrupts.c | 7 +- doc/README.korat | 51 ++++++++ include/configs/alpr.h | 14 ++- include/configs/canyonlands.h | 125 +++++++++++++++++-- include/configs/korat.h | 67 +++++++---- include/configs/lwmon5.h | 8 +- include/configs/sequoia.h | 4 +- include/ppc440.h | 4 + include/ppc4xx_enet.h | 4 + lib_ppc/board.c | 17 +++ 25 files changed, 877 insertions(+), 189 deletions(-) create mode 100644 board/korat/u-boot-F7FC.lds create mode 100644 doc/README.korat
[U-Boot-Users] [cfi-flash] Please pull git://www.denx.de/git/u-boot-cfi-flash.git
The following changes since commit 74d1e66d22dac91388bc538b2fe19f735edc5b82:
Bartlomiej Sieka (1):
Fix host tool build breakage, take two
are available in the git repository at:
git://www.denx.de/git/u-boot-cfi-flash.git master
Tor Krill (1):
MTD/CFI: Add support for 16bit legacy AMD flash
drivers/mtd/cfi_flash.c | 44 +++++++++++++++++++++++++++++++++++--------- drivers/mtd/jedec_flash.c | 19 +++++++++++++++++++ 2 files changed, 54 insertions(+), 9 deletions(-)
[U-Boot-Users] [cfi-flash] Please pull git://www.denx.de/git/u-boot-cfi-flash.git
The following changes since commit 74d1e66d22dac91388bc538b2fe19f735edc5b82:
Bartlomiej Sieka (1):
Fix host tool build breakage, take two
are available in the git repository at:
git://www.denx.de/git/u-boot-cfi-flash.git master
Daniel Hellstrom (1):
MTD/CFI: flash_read64 is defined a weak function (for SPARC)
Tor Krill (1):
MTD/CFI: Add support for 16bit legacy AMD flash
drivers/mtd/cfi_flash.c | 48 +++++++++++++++++++++++++++++++++++--------- drivers/mtd/jedec_flash.c | 19 +++++++++++++++++ 2 files changed, 57 insertions(+), 10 deletions(-)
Wolfgang Denk
Applied[U-Boot-Users] [cfi-flash] Please pull git://www.denx.de/git/u-boot-cfi-flash.git
Quoted 11 lines · In message <[email protected]> you wrote:
The following changes since commit
74d1e66d22dac91388bc538b2fe19f735edc5b82:
Bartlomiej Sieka (1):
Fix host tool build breakage, take twoare available in the git repository at:
git://www.denx.de/git/u-boot-cfi-flash.gitmasterDaniel Hellstrom (1):
MTD/CFI:flash_read64is defined a weak function (for SPARC)
Quoted 6 lines
Tor Krill (1):
MTD/CFI: Add support for 16bit legacy AMD flashdrivers/mtd/cfi_flash.c | 48 +++++++++++++++++++++++++++++++++++--------- drivers/mtd/jedec_flash.c | 19 +++++++++++++++++ 2 files changed, 57 insertions(+), 10 deletions(-)
Merged, thanks.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"'Tis true, 'tis pity, and pity 'tis 'tis true."
- Poloniouius, in Willie the Shake's _Hamlet, Prince of Darkness_[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
In reply to Stefan RoeseThe following changes since commit 234ea73c660cfd0b1c98de00995c32d4152d202f:
Wolfgang Denk (1):
Merge branch 'master' of git+ssh://10.10.0.7/home/wd/git/u-boot/master
are available in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.git master
Wolgang, this is an update for the last pull-request with some addional patches applied. Thanks.
Larry Johnson (2):
ppc4xx: Updates to Korat-specific code
ppc4xx: Add CFG_MEM_TOP_HIDE to Denali SPD-based SDRAM setup
Markus Brunner (1):
ppc4xx: PPC405EP Set EMAC noise filter bits
Matthias Fuchs (3):
ppc4xx: Minor updates for DU440 boards
ppc4xx: Add ptm configuration variables for PMC440
ppc4xx: Cleanup PMC440 board support
Mike Nuss (1):
ppc4xx: Reconfigure PLL for 667MHz processor for PPC440EPx
Pieter Voorthuijsen (1):
ppc4xx: Enable cache support on the ALPR board
Stefan Roese (12):
ppc4xx: Mask 'vec' with 0x1f in uic_interrupt() for bit set/clear
ppc4xx: Add AMCC Glacier 406GT eval board support
ppc4xx: Fix compilation warning in 4xx_enet.c
ppc4xx: Correctly pass phyiscal FLASH base address into dtb
ppc4xx: Fix Canyonlands linker script (remove bogus ASSERT)
ppc: Add CFG_MEM_TOP_HIDE option to hide memory area that doesn't get "touched"
ppc4xx: Add fdt support to Prodrive alpr
ppc: Set CFG_MEM_TOP_HIDE to 0 if not already defined
ppc4xx: Enable ECC on LWMON5
ppc: Small change to CFG_MEM_TOP_HIDE description
ppc4xx: Canyonlands: Print SATA/PCIe configuration and board revision
ppc4xx: Small whitespace fix of esd patches
MAINTAINERS | 1 + MAKEALL | 1 + Makefile | 9 +- README | 21 +++ board/amcc/canyonlands/canyonlands.c | 69 ++++++-- board/amcc/canyonlands/u-boot.lds | 2 - board/esd/du440/du440.c | 5 +- board/esd/du440/du440.h | 1 + board/esd/pmc440/cmd_pmc440.c | 53 +++--- board/esd/pmc440/pmc440.c | 313 +++++++++++++++++----------------- board/korat/config.mk | 16 ++- board/korat/init.S | 31 +++- board/korat/korat.c | 232 ++++++++++++++++++++----- board/korat/u-boot-F7FC.lds | 143 ++++++++++++++++ board/lwmon5/sdram.c | 90 +++-------- board/prodrive/alpr/alpr.c | 25 +++- board/prodrive/alpr/init.S | 9 + cpu/ppc4xx/4xx_enet.c | 56 ++++++- cpu/ppc4xx/cpu_init.c | 102 +++++++++++- cpu/ppc4xx/denali_spd_ddr2.c | 27 ++-- cpu/ppc4xx/interrupts.c | 7 +- doc/README.korat | 51 ++++++ include/configs/DU440.h | 16 +- include/configs/alpr.h | 14 ++- include/configs/canyonlands.h | 126 +++++++++++++-- include/configs/korat.h | 67 +++++--- include/configs/lwmon5.h | 8 +- include/configs/sequoia.h | 4 +- include/ppc440.h | 4 + include/ppc4xx_enet.h | 4 + lib_ppc/board.c | 17 ++ 31 files changed, 1127 insertions(+), 397 deletions(-) create mode 100644 board/korat/u-boot-F7FC.lds create mode 100644 doc/README.korat
Wolfgang Denk
Applied[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
Quoted 11 lines · In message <[email protected]> you wrote:
The following changes since commit
234ea73c660cfd0b1c98de00995c32d4152d202f:
Wolfgang Denk (1):Merge branch 'master' of git+ssh://10.10.0.7/home/wd/git/u-boot/masterare available in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.gitmasterWolgang, this is an update for the last pull-request with some addional patches applied. Thanks.
Merged, thanks!
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Each honest calling, each walk of life, has its own elite, its own aristocracy based on excellence of performance. - James Bryant Conant
[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
In reply to Stefan RoeseThe following changes since commit aeff6d503b6006573d5c6b04fc658a64bebee5fa:
Wolfgang Denk (1):
Merge branch 'master' of git://www.denx.de/git/u-boot-fdt
are available in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.git master
Stefan Roese (2):
ppc: Revert patch 70431e8a that used _start instead of CFG_MONITOR_BASE
ppc4xx: Fix Canyonlands default environment to work with new image support
include/configs/canyonlands.h | 12 +++++------- lib_ppc/board.c | 2 +- 2 files changed, 6 insertions(+), 8 deletions(-)
[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
The following changes since commit aeff6d503b6006573d5c6b04fc658a64bebee5fa:
Wolfgang Denk (1):
Merge branch 'master' of git://www.denx.de/git/u-boot-fdt
are available in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.git master
Eugene O'Brien (1):
ppc4xx: Fix power mgt definitions for PPC440
Stefan Roese (3):
ppc: Revert patch 70431e8a that used _start instead of CFG_MONITOR_BASE
ppc4xx: Fix Canyonlands default environment to work with new image support
ppc4xx: Update Kilauea defconfig to use device-tree booting as default
include/configs/canyonlands.h | 12 +++++------- include/configs/kilauea.h | 27 ++++++++++++++++----------- include/ppc440.h | 9 +-------- lib_ppc/board.c | 2 +- 4 files changed, 23 insertions(+), 27 deletions(-)
[U-Boot-Users] [cfi-flash] Please pull git://www.denx.de/git/u-boot-cfi-flash.git
The following changes since commit 950a392464e616b4590bc4501be46e2d7d162dea:
Wolfgang Denk (1):
Revert merge of git://www.denx.de/git/u-boot-arm, commit 62479b18:
are available in the git repository at:
git://www.denx.de/git/u-boot-cfi-flash.git master
Guennadi Liakhovetski (1):
cfi_flash: Support buffered writes on non-standard Spansion NOR flash
README | 7 +++++++ drivers/mtd/cfi_flash.c | 46 ++++++++++++++++------------------------------ 2 files changed, 23 insertions(+), 30 deletions(-)
Wolfgang Denk
Applied[U-Boot-Users] [cfi-flash] Please pull git://www.denx.de/git/u-boot-cfi-flash.git
Quoted 5 lines · In message <[email protected]> you wrote:
git://www.denx.de/git/u-boot-cfi-flash.gitmasterGuennadi Liakhovetski (1):
cfi_flash: Support buffered writes on non-standard Spansion NOR flash
Applied. Thanks.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de There are no data that cannot be plotted on a straight line if the axis are chosen correctly.
[U-Boot-Users] [cfi-flash] Please pull git://www.denx.de/git/u-boot-cfi-flash.git
In reply to Stefan RoeseThe following changes since commit d0d91ae3acb4f29d1a2a3a766747478ed54e2848:
Stefan Roese (1):
ppc4xx: Remove double defines in lwmon5.h
are available in the git repository at:
git://www.denx.de/git/u-boot-cfi-flash.git master
Matthias Fuchs (1):
cfi-flash: Add CFG_FLASH_AUTOPROTECT_LIST
drivers/mtd/cfi_flash.c | 17 +++++++++++++++++ 1 files changed, 17 insertions(+), 0 deletions(-)
[U-Boot-Users] [cfi-flash] Please pull git://www.denx.de/git/u-boot-cfi-flash.git
Quoted 6 lines · In message <[email protected]> you wrote:
The following changes since commit
d0d91ae3acb4f29d1a2a3a766747478ed54e2848:
Stefan Roese (1):
ppc4xx: Remove double defines inlwmon5.hare available in the git repository at:
Quoted 7 lines
git://www.denx.de/git/u-boot-cfi-flash.gitmasterMatthias Fuchs (1):
cfi-flash: AddCFG_FLASH_AUTOPROTECT_LISTdrivers/mtd/cfi_flash.c | 17 +++++++++++++++++ 1 files changed, 17 insertions(+), 0 deletions(-)
Done, thanks.
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de He had quite a powerful intellect, but it was as powerful like a locomotive, and ran on rails and was therefore almost impossible to steer. - Terry Pratchett, _Lords and Ladies_
Wolfgang Denk
Applied[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
In reply to Stefan RoeseQuoted 10 lines · In message <[email protected]> you wrote:
git://www.denx.de/git/u-boot-ppc4xx.gitmasterEugene O'Brien (1):
ppc4xx: Fix power mgt definitions for PPC440Stefan Roese (3):
ppc: Revert patch70431e8athat used_startinstead ofCFG_MONITOR_BASE
ppc4xx: Fix Canyonlands default environment to work with new image support
ppc4xx: Update Kilauea defconfig to use device-tree booting as default
Applied, thanks.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Anarchy may not be the best form of government, but it's better than no government at all.
[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
In reply to Stefan RoeseThe following changes since commit 5e3dca577b7c1bf58bd2b48449b18b7e7dcd8e04:
Anatolij Gustschin (1):
Fix crash on sequoia in ppc_4xx_eth_init
are available in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.git master
Stefan Roese (4):
ppc4xx: Add Glacier NAND booting target
ppc4xx: Adjust Canyonlands fixed DDR2 setup (NAND booting) to 512MB SODIMM
ppc4xx: Change Canyonlands to support booting from 2k page NAND devices
ppc4xx: Add dcache_enable() for 440
Makefile | 5 ++++- board/amcc/canyonlands/bootstrap.c | 13 +++++++++++++ board/amcc/canyonlands/init.S | 1 + board/amcc/canyonlands/u-boot-nand.lds | 4 ++-- cpu/ppc4xx/cache.S | 2 ++ include/configs/canyonlands.h | 26 ++++++++++++++++---------- nand_spl/board/amcc/canyonlands/config.mk | 6 +++--- nand_spl/board/amcc/canyonlands/ddr2_fixed.c | 8 ++++---- 8 files changed, 45 insertions(+), 20 deletions(-)
[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
The following changes since commit 5e3dca577b7c1bf58bd2b48449b18b7e7dcd8e04:
Anatolij Gustschin (1):
Fix crash on sequoia in ppc_4xx_eth_init
are available in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.git master
Matthias Fuchs (9):
ppc4xx: Fix sys_get_info() for 405GP(r)
ppc4xx: Update bootlogo for APC405 boards
ppc4xx: Update FPGA image for APC405 boards
ppc4xx: Update esd's common LCD code for 405 boards
ppc4xx: update esd's common auto_update code for 405 boards
ppc4xx: Update APC405 board support
ppc4xx: Update APC405 configuration
ppc4xx: Remove unused APC405 strataflash driver
ppc4xx: Update CPU strapping for PMC440 boards
Stefan Roese (6):
ppc4xx: Add Glacier NAND booting target
ppc4xx: Adjust Canyonlands fixed DDR2 setup (NAND booting) to 512MB SODIMM
ppc4xx: Change Canyonlands to support booting from 2k page NAND devices
ppc4xx: Add dcache_enable() for 440
ppc4xx: Small coding style cleanup for the latest esd patches
ppc4xx: Fix Canyonlands and Glacier default environment for fdt usage
Makefile | 5 +- board/amcc/canyonlands/bootstrap.c | 13 + board/amcc/canyonlands/init.S | 1 + board/amcc/canyonlands/u-boot-nand.lds | 4 +- board/esd/apc405/Makefile | 4 +- board/esd/apc405/apc405.c | 360 ++- board/esd/apc405/fpgadata.c | 4284 ++++++++++++-------------- board/esd/apc405/logo_640_480_24bpp.c | 800 ++++-- board/esd/apc405/strataflash.c | 789 ----- board/esd/common/auto_update.c | 208 +- board/esd/common/auto_update.h | 15 +- board/esd/common/lcd.c | 123 +- board/esd/common/s1d13505_640_480_16bpp.h | 65 + board/esd/pmc440/cmd_pmc440.c | 13 +- cpu/ppc4xx/cache.S | 2 + cpu/ppc4xx/speed.c | 2 + include/configs/APC405.h | 346 ++- include/configs/canyonlands.h | 49 +- nand_spl/board/amcc/canyonlands/config.mk | 6 +- nand_spl/board/amcc/canyonlands/ddr2_fixed.c | 8 +- 20 files changed, 3320 insertions(+), 3777 deletions(-) delete mode 100644 board/esd/apc405/strataflash.c create mode 100644 board/esd/common/s1d13505_640_480_16bpp.h
[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
Quoted 42 lines · In message <[email protected]> you wrote:
The following changes since commit
5e3dca577b7c1bf58bd2b48449b18b7e7dcd8e04:
Anatolij Gustschin (1):
Fix crash on sequoia inppc_4xx_eth_initare available in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.gitmasterMatthias Fuchs (9):
ppc4xx: Fixsys_get_info()for 405GP(r)
ppc4xx: Update bootlogo for APC405 boards
ppc4xx: Update FPGA image for APC405 boards
ppc4xx: Update esd's common LCD code for 405 boards
ppc4xx: update esd's commonauto_updatecode for 405 boards
ppc4xx: Update APC405 board support
ppc4xx: Update APC405 configuration
ppc4xx: Remove unused APC405 strataflash driver
ppc4xx: Update CPU strapping for PMC440 boardsStefan Roese (6):
ppc4xx: Add Glacier NAND booting target
ppc4xx: Adjust Canyonlands fixed DDR2 setup (NAND booting) to 512MB SODIMM
ppc4xx: Change Canyonlands to support booting from 2k page NAND devices
ppc4xx: Adddcache_enable()for 440
ppc4xx: Small coding style cleanup for the latest esd patches
ppc4xx: Fix Canyonlands and Glacier default environment for fdt usageMakefile | 5 +- board/amcc/canyonlands/bootstrap.c | 13 + board/amcc/canyonlands/init.S | 1 + board/amcc/canyonlands/u-boot-nand.lds | 4 +- board/esd/apc405/Makefile | 4 +- board/esd/apc405/apc405.c | 360 ++- board/esd/apc405/fpgadata.c | 4284 ++++++++++++-------------- board/esd/apc405/logo_640_480_24bpp.c | 800 ++++-- board/esd/apc405/strataflash.c | 789 ----- board/esd/common/auto_update.c | 208 +- board/esd/common/auto_update.h | 15 +- board/esd/common/lcd.c | 123 +- board/esd/common/s1d13505_640_480_16bpp.h | 65 + board/esd/pmc440/cmd_pmc440.c | 13 +- cpu/ppc4xx/cache.S | 2 +
Quoted 8 lines
cpu/ppc4xx/speed.c | 2 + include/configs/APC405.h | 346 ++- include/configs/canyonlands.h | 49 +- nand_spl/board/amcc/canyonlands/config.mk | 6 +- nand_spl/board/amcc/canyonlands/ddr2_fixed.c | 8 +- 20 files changed, 3320 insertions(+), 3777 deletions(-) delete mode 100644 board/esd/apc405/strataflash.c create mode 100644 board/esd/common/s1d13505_640_480_16bpp.h
Done, Thanks.
Best regards,
Wolfgang Denk
Signature · 9 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de NEW GRAND UNIFIED THEORY DISCLAIMER: The Manufacturer May Technically Be Entitled to Claim That This Product Is Ten-Dimensional. However, the Consumer Is Reminded That This Confers No Legal Rights Above and Beyond Those Applicable to Three-Dimensional Objects, Since the Seven New Dimensions Are "Rolled Up" into Such a Small "Area" That They Cannot Be Detected.
[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
In reply to Stefan RoeseThe following changes since commit 58c5376ba67767ee684069d43e7f747a5d9ae8ed:
Wolfgang Denk (1):
Merge branch 'master' of git://www.denx.de/git/u-boot-ppc4xx
are available in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.git master
Matthias Fuchs (1):
ppc4xx: Add bootcount limit handling for APC405 boards
Stefan Roese (1):
ppc4xx: Pass PCIe root-complex/endpoint configuration to Linux via the fdt
board/esd/apc405/apc405.c | 7 ++++++- cpu/ppc4xx/fdt.c | 42 ++++++++++++++++++++++++++++++++++++++++++ include/asm-ppc/4xx_pcie.h | 5 ++++- include/configs/APC405.h | 14 ++++++++++++-- 4 files changed, 64 insertions(+), 4 deletions(-)
[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
Quoted 6 lines · In message <[email protected]> you wrote:
The following changes since commit
58c5376ba67767ee684069d43e7f747a5d9ae8ed:
Wolfgang Denk (1):
Merge branch 'master' ofgit://www.denx.de/git/u-boot-ppc4xxare available in the git repository at:
Quoted 7 lines
git://www.denx.de/git/u-boot-ppc4xx.gitmasterMatthias Fuchs (1):
ppc4xx: Add bootcount limit handling for APC405 boardsStefan Roese (1):
ppc4xx: Pass PCIe root-complex/endpoint configuration to Linux via the fdt
done, thanks.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Some programming languages manage to absorb change, but withstand progress. -- Epigrams in Programming, ACM SIGPLAN Sept. 1982
Wolfgang Denk
Applied[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
In reply to Stefan RoeseQuoted 8 lines · In message <[email protected]> you wrote:
are available in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.gitmasterStefan Roese (2):
ppc: Revert patch70431e8athat used_startinstead ofCFG_MONITOR_BASE
ppc4xx: Fix Canyonlands default environment to work with new image support
Applied, thanks.
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Small is beautiful.
[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
In reply to Stefan RoeseThe following changes since commit 422b1a01602b6e2fbf8444a1192c7ba31461fd4c:
Ben Warren (1):
Fix Ethernet init() return codes
are available in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.git master
Anatolij Gustschin (1):
ppc4xx: Rework Lime support for lwmon5
Larry Johnson (1):
ppc4xx: Fix dflush() to restore DVLIM register
Matthias Fuchs (2):
ppx4xx: Fix sdram init on PMC440 boards
ppc4xx: Update PMC440 config file
Niklaus Giger (1):
ppc4xx: Make Sequoia boot vxWorks
Stefan Roese (1):
ppc4xx: Fix sdram init on Sequoia boards
board/amcc/sequoia/init.S | 26 ++++---- board/amcc/sequoia/sdram.c | 7 ++ board/esd/pmc440/sdram.c | 7 ++ board/lwmon5/lwmon5.c | 157 ++++++++++++++++++++++++-------------------- cpu/ppc4xx/start.S | 2 + include/configs/PMC440.h | 16 +---- include/configs/lwmon5.h | 16 +++++ include/configs/sequoia.h | 1 + 8 files changed, 135 insertions(+), 97 deletions(-)
[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
Quoted 18 lines · In message <[email protected]> you wrote:
The following changes since commit
422b1a01602b6e2fbf8444a1192c7ba31461fd4c:
Ben Warren (1):
Fix Ethernetinit()return codesare available in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.gitmasterAnatolij Gustschin (1):
ppc4xx: Rework Lime support for lwmon5Larry Johnson (1):
ppc4xx: Fixdflush()to restore DVLIM registerMatthias Fuchs (2):
ppx4xx: Fix sdram init on PMC440 boards
ppc4xx: Update PMC440 config file
Quoted 5 lines
Niklaus Giger (1):
ppc4xx: Make Sequoia boot vxWorksStefan Roese (1):
ppc4xx: Fix sdram init on Sequoia boards
Done, thanks.
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Parkinson's Law: Work expands to fill the time alloted it.
[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
The following changes since commit 8d99cd0691b7094ea1e2bf5309b0877047a9f375:
Stefan Roese (1):
Merge branch 'master' of /home/stefan/git/u-boot/u-boot
are available in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.git master
Larry Johnson (2):
ppc4xx: Refactor ECC POST for AMCC Denali core Merge Sequoia beautification into Korat code
Matthias Fuchs (3):
ppc4xx: Sequoia coding style cleanup and beautification
ppc4xx: Add DU440 board support
ppc4xx: Complete DU440 board support
Niklaus Giger (5):
ppc4xx: Netstal HCU4 board. Added POST. Various fixes
ppc4xx: Netstal HCU5 board. Added POST. Various fixes
ppc4xx: Netstal HCU5 board: added various fixes and POST
ppc4xx: netstal/common define routines used by all boards
ppc4xx: Netstal HCU4 board: added various fixes and POST
Stefan Roese (2):
ppc4xx: Fix remaining CONFIG_COMMANDS in 4xx files
ppc4xx: Fix compilation warnings and coding style issues in HCU4/HCU5
MAINTAINERS | 1 + MAKEALL | 1 + Makefile | 3 + board/amcc/kilauea/cmd_pll.c | 2 +- board/amcc/makalu/cmd_pll.c | 2 +- board/amcc/sequoia/init.S | 7 +- board/amcc/sequoia/sequoia.c | 246 ++++----- board/esd/du440/Makefile | 51 ++ board/esd/du440/config.mk | 37 ++ board/esd/du440/du440.c | 1018 ++++++++++++++++++++++++++++++++++++ board/esd/du440/du440.h | 42 ++ board/esd/du440/init.S | 81 +++ board/esd/du440/u-boot.lds | 145 +++++ board/korat/korat.c | 311 +++++------ board/netstal/common/fixed_sdram.c | 105 ++++ board/netstal/common/nm.h | 38 ++ board/netstal/common/nm_bsp.c | 128 ++++- board/netstal/hcu4/Makefile | 6 +- board/netstal/hcu4/config.mk | 2 +- board/netstal/hcu4/hcu4.c | 341 +++---------- board/netstal/hcu5/Makefile | 5 +- board/netstal/hcu5/README.txt | 3 - board/netstal/hcu5/config.mk | 2 +- board/netstal/hcu5/hcu5.c | 289 +++++------ board/netstal/hcu5/init.S | 71 ++- board/netstal/hcu5/sdram.c | 86 ++-- board/netstal/hcu5/u-boot.lds | 2 +- include/configs/DU440.h | 438 ++++++++++++++++ include/configs/PMC440.h | 4 +- include/configs/hcu4.h | 115 +++-- include/configs/hcu5.h | 136 +++-- include/configs/kilauea.h | 2 +- include/configs/makalu.h | 2 +- post/cpu/ppc4xx/denali_ecc.c | 266 +++++----- 34 files changed, 2912 insertions(+), 1076 deletions(-) create mode 100644 board/esd/du440/Makefile create mode 100644 board/esd/du440/config.mk create mode 100644 board/esd/du440/du440.c create mode 100644 board/esd/du440/du440.h create mode 100644 board/esd/du440/init.S create mode 100644 board/esd/du440/u-boot.lds create mode 100644 board/netstal/common/fixed_sdram.c create mode 100644 board/netstal/common/nm.h create mode 100644 include/configs/DU440.h
[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
Quoted 24 lines · In message <[email protected]> you wrote:
The following changes since commit
8d99cd0691b7094ea1e2bf5309b0877047a9f375:
Stefan Roese (1):
Merge branch 'master' of/home/stefan/git/u-boot/u-bootare available in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.gitmasterLarry Johnson (2):
ppc4xx: Refactor ECC POST for AMCC Denali core Merge Sequoia beautification into Korat codeMatthias Fuchs (3):
ppc4xx: Sequoia coding style cleanup and beautification
ppc4xx: Add DU440 board support
ppc4xx: Complete DU440 board supportNiklaus Giger (5):
ppc4xx: Netstal HCU4 board. Added POST. Various fixes
ppc4xx: Netstal HCU5 board. Added POST. Various fixes
ppc4xx: Netstal HCU5 board: added various fixes and POST
ppc4xx: netstal/common define routines used by all boards
ppc4xx: Netstal HCU4 board: added various fixes and POST
Quoted 3 lines
Stefan Roese (2):
ppc4xx: Fix remainingCONFIG_COMMANDSin 4xx files
ppc4xx: Fix compilation warnings and coding style issues in HCU4/HCU5
Done.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de There are two ways to write error-free programs. Only the third one works.
[U-Boot-Users] [cfi-flash] Please pull git://www.denx.de/git/u-boot-cfi-flash.git
In reply to Stefan RoeseThe following changes since commit 8d79953d03e6c5b24215609997dafe4daa623cd6:
Stefan Roese (1):
Merge branch 'master' of /home/stefan/git/u-boot/u-boot
are available in the git repository at:
git://www.denx.de/git/u-boot-cfi-flash.git master
Michael Schwingen (1):
CFI: Fix CONFIG_FLASH_CFI_LEGACY compilation
drivers/mtd/cfi_flash.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)
[U-Boot-Users] [cfi-flash] Please pull git://www.denx.de/git/u-boot-cfi-flash.git
Quoted 10 lines · In message <[email protected]> you wrote:
The following changes since commit
8d79953d03e6c5b24215609997dafe4daa623cd6:
Stefan Roese (1):
Merge branch 'master' of/home/stefan/git/u-boot/u-bootare available in the git repository at:
git://www.denx.de/git/u-boot-cfi-flash.gitmasterMichael Schwingen (1):
CFI: FixCONFIG_FLASH_CFI_LEGACYcompilation
Done. Thanks.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
When it is incorrect, it is, at least *authoritatively* incorrect.
- Hitchiker's Guide To The Galaxy[U-Boot-Users] [nand-flash] Please pull git://www.denx.de/git/u-boot-nand-flash.git
In reply to Stefan RoeseThe following changes since commit 58d204256cb1ce1bd323847d9f644acf70a72e6a:
Wolfgang Denk (1):
LWMON5: enable hush shell as command line parser
are available in the git repository at:
git://www.denx.de/git/u-boot-nand-flash.git master
Anton Vorontsov (1):
nand: FSL UPM NAND driver
Kyungmin Park (1):
OneNAND: Separate U-Boot dependent code from OneNAND
drivers/mtd/nand/Makefile | 2 + drivers/mtd/nand/fsl_upm.c | 201 +++++++++++++++++++++++++++++++++++ drivers/mtd/onenand/Makefile | 2 +- drivers/mtd/onenand/onenand_base.c | 20 ---- drivers/mtd/onenand/onenand_uboot.c | 41 +++++++ include/linux/mtd/fsl_upm.h | 39 +++++++ 6 files changed, 284 insertions(+), 21 deletions(-) create mode 100644 drivers/mtd/nand/fsl_upm.c create mode 100644 drivers/mtd/onenand/onenand_uboot.c create mode 100644 include/linux/mtd/fsl_upm.h
[U-Boot-Users] [nand-flash] Please pull git://www.denx.de/git/u-boot-nand-flash.git
Quoted 6 lines · In message <[email protected]> you wrote:
The following changes since commit
58d204256cb1ce1bd323847d9f644acf70a72e6a:
Wolfgang Denk (1):
LWMON5: enable hush shell as command line parserare available in the git repository at:
Quoted 7 lines
git://www.denx.de/git/u-boot-nand-flash.gitmasterAnton Vorontsov (1):
nand: FSL UPM NAND driverKyungmin Park (1):
OneNAND: Separate U-Boot dependent code from OneNAND
Done. Thanks.
Best regards,
Wolfgang Denk
Signature · 3 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Computers are not intelligent. They only think they are.
[U-Boot-Users] [nand-flash] Please pull git://www.denx.de/git/u-boot-nand-flash.git
In reply to Stefan RoeseThe following changes since commit 5e3dca577b7c1bf58bd2b48449b18b7e7dcd8e04:
Anatolij Gustschin (1):
Fix crash on sequoia in ppc_4xx_eth_init
are available in the git repository at:
git://www.denx.de/git/u-boot-nand-flash.git master
Stefan Roese (1):
nand_spl: Update nand_spl to support 2k page size NAND devices
nand_spl/nand_boot.c | 64 +++++++++++++++++++++++++++++++++++++++++++++++++- 1 files changed, 63 insertions(+), 1 deletions(-)
[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
In reply to Stefan RoeseThe following changes since commit f43ad53908f1ea83a7c26c3505bbe84382e47aad:
Wolfgang Denk (1):
ARM: update mach-types.h from 2.6.24-rc7 Linux kernel tree
are available in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.git master
Stefan Roese (1):
ppc4xx: Update Kilauea CPLD configuration with USB PHY reset bit
board/amcc/kilauea/kilauea.c | 14 +++++++------- 1 files changed, 7 insertions(+), 7 deletions(-)
[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
Quoted 6 lines · In message <[email protected]> you wrote:
The following changes since commit
f43ad53908f1ea83a7c26c3505bbe84382e47aad:
Wolfgang Denk (1):
ARM: updatemach-types.hfrom 2.6.24-rc7 Linux kernel treeare available in the git repository at:
Quoted 7 lines
git://www.denx.de/git/u-boot-ppc4xx.gitmasterStefan Roese (1):
ppc4xx: Update Kilauea CPLD configuration with USB PHY reset bitboard/amcc/kilauea/kilauea.c | 14 +++++++------- 1 files changed, 7 insertions(+), 7 deletions(-)
Done. Thanks.
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Time is an illusion perpetrated by the manufacturers of space.
[U-Boot-Users] [cfi-flash] Please pull git://www.denx.de/git/u-boot-cfi-flash.git
In reply to Stefan RoeseQuoted 7 lines · In message <[email protected]> you wrote:
The following changes since commit
0dcfe3a225a9436fc514f374a19242c672f1172b:
Wolfgang Denk (1):
Merge branch 'master' of/home/wd/git/u-boot/custodiansare available in the git repository at:
git://www.denx.de/git/u-boot-cfi-flash.gitmaster
Done, thanks.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de How many QA engineers does it take to screw in a lightbulb? 3: 1 to screw it in and 2 to say "I told you so" when it doesn't work.