Anyone using mpc832x_mds & freescale's GIT repo?
Hi list,
I've got an MPC8323E-MDS-PB development board, which is running a year-old BSP from freescale. I wanted to track the most current developments so I cloned
http://opensource.freescale.com/pub/scm/linux-2.6-83xx.git
and rebuilt with ARCH=powerpc and using the mpc832x_mds_defconfig.
I now don't get any serial console output after u-boot has started the kernel.
My questions are:
1. Is anyone else using this GIT repo with this board?
2. Is there an example u-boot environment for starting the latest kernels
on this board?
3. Am I using the right ARCH. (I chose ARCH=powerpc because there's
no defconfig file for this board under arch/ppc!)
TIA,
Alex
Quoted 8 lines · On Mon, 30 Apr 2007 16:15:41 +0100 Alex Zeffertt <[email protected]>…
Hi list,
I've got an MPC8323E-MDS-PB development board, which is running a year-old BSP from freescale. I wanted to track the most current developments so I cloned
http://opensource.freescale.com/pub/scm/linux-2.6-83xx.git
that tree is obsolete; I'll label it so to avoid confusion.
Quoted 9 lines
and rebuilt with ARCH=powerpc and using the
mpc832x_mds_defconfig.I now don't get any serial console output after u-boot has started the kernel.
My questions are:
1. Is anyone else using this GIT repo with this board?
please use the mpc83xx custodian tree on denx.de:
{git-,cg-}{clone,pull} git://www.denx.de/git/u-boot-mpc83xx.git
Quoted 2 lines
2. Is there an example u-boot environment for starting the latest kernels
on this board?
the nfsboot and ramboot commands found in that board's default environment specify the fdt address with the new bootm syntax.
Quoted 4 lines
3. Am I using the right ARCH. (I chose ARCH=powerpc because there's
no defconfig file for this board underarch/ppc!)
yup.
Kim
Quoted 18 lines · Kim Phillips
Quoted 8 lines · On Mon, 30 Apr 2007 16:15:41 +0100 Alex Zeffertt <[email protected]>…
Hi list,
I've got an MPC8323E-MDS-PB development board, which is running a year-old BSP from freescale. I wanted to track the most current developments so I cloned
http://opensource.freescale.com/pub/scm/linux-2.6-83xx.gitthat tree is obsolete; I'll label it so to avoid confusion.
Quoted 5 lines
and rebuilt with ARCH=powerpc and using the
mpc832x_mds_defconfig.I now don't get any serial console output after u-boot has started the kernel.
Quoted 8 lines
Quoted 4 lines
My questions are:
1. Is anyone else using this GIT repo with this board?
please use the mpc83xx custodian tree on denx.de:
{git-,cg-}{clone,pull}
git://www.denx.de/git/u-boot-mpc83xx.git
Hi Kim,
Thanks for your reply. I am already using the *u-boot* repo you mention above. Do you know which *linux* repository is the most current for the MPC8323E-MDS-PB board?
Best regards,
Alex
Quoted 3 lines · On Tue, 01 May 2007 10:34:09 +0100 Alex Zeffertt <[email protected]>…
mention above. Do you know which *linux* repository is the most current for the MPC8323E-MDS-PB board?
yes, linux..normally I'd say paulus' powerpc.git tree on kernel.org, but today, 832x-MDS is broken there. You might want to checkout the v2.6.21 tag until the pending patches (to support the ucc phylib) are applied and merged.
Kim
Quoted 11 lines · Kim Phillips
Quoted 2 lines · On Tue, 01 May 2007 10:34:09 +0100 Alex Zeffertt <[email protected]>…
mention above. Do you know which *linux* repository is the most current for the MPC8323E-MDS-PB board?
yes, linux..normally I'd say paulus' powerpc.git tree on kernel.org, but today, 832x-MDS is broken there. You might want to checkout the v2.6.21 tag until the pending patches (to support the ucc phylib) are applied and merged.
Thanks again for your reply. I know this is going to sound like I'm repeating myself, but I want to be sure....
Would you recommend using powerpc.git v2.6.21 in preference to the 2.6.11 kernel that comes with the latest Freescale BSP (MPC832xE_MDS_K26_20070130-LTIB.iso)?
TIA,
Alex
Quoted 3 lines · On Tue, 01 May 2007 15:05:44 +0100 Alex Zeffertt <[email protected]>…
Would you recommend using powerpc.git v2.6.21 in preference to the 2.6.11 kernel that comes with the latest Freescale BSP (MPC832xE_MDS_K26_20070130-LTIB.iso)?
personally, and in general, yes. But it really depends on your application, device driver requirements, etc..
Kim