Nbd problem now oopses.
Hi,
After turning on the debugging for allocations and locks, I now get a kernel ooops.
[ 5628.608000] BUG: unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 5628.608000] printing eip: [ 5628.608000] c0293210 [ 5628.608000] *pde = 00000000 [ 5628.608000] Oops: 0002 [#1] [ 5628.608000] Modules linked in: nbd [ 5628.608000] CPU: 0 [ 5628.608000] EIP: 0060:[<c0293210>] Not tainted VLI [ 5628.608000] EFLAGS: 00010246 (2.6.21 #8) [ 5628.608000] EIP is at tcp_sendmsg+0x726/0xab3 [ 5628.608000] eax: 00000000 ebx: c24576b8 ecx: 00000000 edx: 00000000 [ 5628.608000] esi: c30a006c edi: 00000840 ebp: 00000000 esp: c3f8fc5c [ 5628.608000] ds: 007b es: 007b fs: 00d8 gs: 0000 ss: 0068 [ 5628.608000] Process kblockd/0 (pid: 34, ti=c3f8e000 task=c3f89550 task.ti=c3f8e000) [ 5628.608000] Stack: 00000002 0000012b 00000001 00000046 0000000a c011ad49 00000000 c100dea0 [ 5628.608000] 00000001 00000000 00000000 c2b2c7c0 00000840 000007c0 0000baa8 000005a8 [ 5628.608000] 0000c000 00000000 c3f8fdf8 c3f8e000 00001000 7fffffff c03a3820 c30a006c [ 5628.608000] Call Trace: [ 5628.608000] [<c011ad49>] __do_softirq+0x35/0x73 [ 5628.608000] [<c02ab61c>] inet_sendmsg+0x39/0x43 [ 5628.608000] [<c026c744>] sock_sendmsg+0xbc/0xd4 ... [ 5628.608000] Code: d2 89 d5 74 26 83 be 80 01 00 00 00 0f 85 7b 03 00 00 c7 86 88 01 00 00 00 00 00 00 8b 5c 24 1c 89 9e 80 01 00 00 e9 62 03 00 00 [ 5628.608000] EIP: [<c0293210>] tcp_sendmsg+0x726/0xab3 SS:ESP 0068:c3f8fc5c
which seems to be:
0xc02931f1 <tcp_sendmsg+1799>: jne 0xc0293572 <tcp_sendmsg+2696> 0xc02931f7 <tcp_sendmsg+1805>: movl $0x0,0x188(%esi) 0xc0293201 <tcp_sendmsg+1815>: mov 0x1c(%esp),%ebx 0xc0293205 <tcp_sendmsg+1819>: mov %ebx,0x180(%esi) 0xc029320b <tcp_sendmsg+1825>: jmp 0xc0293572 <tcp_sendmsg+2696>
EIP points here:
0xc0293210 <tcp_sendmsg+1830>: cmpl $0x0,0x24(%esp) 0xc0293215 <tcp_sendmsg+1835>: mov 0x98(%ebx),%edx 0xc029321b <tcp_sendmsg+1841>: je 0xc0293232 <tcp_sendmsg+1864> 0xc029321d <tcp_sendmsg+1843>: mov 0x20(%esp),%ecx 0xc0293221 <tcp_sendmsg+1847>: movzwl 0x12(%edx,%ecx,8),%eax 0xc0293226 <tcp_sendmsg+1852>: add %edi,%eax 0xc0293228 <tcp_sendmsg+1854>: mov %ax,0x12(%edx,%ecx,8) 0xc029322d <tcp_sendmsg+1859>: jmp 0xc02932b4 <tcp_sendmsg+1994>
which is
790 if (err) {
791 /* If this page was new, give it to the
792 * socket so it does not get leaked.
793 */
794 if (!TCP_PAGE(sk)) {
795 TCP_PAGE(sk) = page;
796 TCP_OFF(sk) = 0;
797 }
798 goto do_error;
799 }
800
801 /* Update the skb. */
EIP Points here.....
802 if (merge) {
803 skb_shinfo(skb)->frags[i - 1].size +=
804 copy;
and now the question is: How can the
cmpl $0x0,0x24(%esp)
trap at address 0?
How can "if (merge)" cause a segmentation fault?
If EIP is a bit off, it could be a line erarlier or further. So, could it crash on the jmp tcp_sendmsg+2696? I dont' thinks so.
How about "mov 0x98(%ebx),%edx"? If ebx is invalid, this should
crash. (ebx apparently holds skb if I understand things correctly). But from the dump, ebx holds c24576b8, and if that's invalid it would not say
BUG: unable to handle kernel NULL pointer dereference at virtual address 00000000
right?
Roger.
Signature · 6 lines
** [email protected] ** http://www.BitWizard.nl/ ** +31-15-2600998 ** ** Delftechpark 26 2628 XH Delft, The Netherlands. KVK: 27239233 ** *-- BitWizard writes Linux device drivers for any device you may have! --* Q: It doesn't work. A: Look buddy, doesn't work is an ambiguous statement. Does it sit on the couch all day? Is it unemployed? Please be specific! Define 'it' and what it isn't doing. --------- Adapted from lxrbot FAQ
Quoted 3 lines · Rogier Wolff
...
[ 5628.608000] Code: d2 89 d5 74 26 83 be 80 01 00 00 00 0f 85 7b 03 00 00 c7 86 88 01 00 00 00 00 00 00 8b 5c 24 1c 89 9e 80 01 00 00 e9 62 03 00 00 [ 5628.608000] EIP: [<c0293210>] tcp_sendmsg+0x726/0xab3 SS:ESP 0068:c3f8fc5c
A big chunk of the machine code is missing here, so it's impossible to tell what really happened.